Added autotools environment
authorVladimir Sokolovsky <vlad@mellanox.com>
Mon, 27 Oct 2014 15:15:13 +0000 (17:15 +0200)
committerVladimir Sokolovsky <vlad@mellanox.com>
Tue, 28 Oct 2014 11:40:51 +0000 (13:40 +0200)
Signed-off-by: Vladimir Sokolovsky <vlad@mellanox.com>
autogen.sh [new file with mode: 0755]
build/Makefile [new file with mode: 0644]
config/build-linux.m4 [new file with mode: 0644]
config/config.guess [new file with mode: 0644]
config/config.sub [new file with mode: 0644]
config/install-sh [new file with mode: 0644]
config/missing [new file with mode: 0644]
config/rdma.m4 [new file with mode: 0644]
configure.ac [new file with mode: 0644]

diff --git a/autogen.sh b/autogen.sh
new file mode 100755 (executable)
index 0000000..05296a1
--- /dev/null
@@ -0,0 +1,20 @@
+#!/bin/sh
+
+run_cmd()
+{
+       cmd="$@"
+       echo -n "Running $cmd"
+       eval $cmd
+       res=$?
+       if [ $res -ne 0 ]; then
+               echo " failed: $res"
+               echo "Aborting"
+               exit 1
+       fi
+       echo
+}
+
+run_cmd "aclocal -I $PWD/config $ACLOCAL_FLAGS"
+run_cmd "autoheader"
+# run_cmd "automake -a -c"
+run_cmd autoconf
diff --git a/build/Makefile b/build/Makefile
new file mode 100644 (file)
index 0000000..96234c0
--- /dev/null
@@ -0,0 +1,48 @@
+#
+# There are four ways this Makefile can be called:
+#
+#
+# 1.  As a subdirectory from the toplevel, for automake
+#
+# 2.  A wrapper around the kernel's makefile when building modules, to
+#     possibly override the .config file
+#
+# 3.  At configure time, as the toplevel module dir for building
+#     kernel tests
+#
+# 4.  At configure time, to determine the kernel's idea of $(ARCH)
+#
+
+ifeq ($(PATCHLEVEL),)
+
+ifeq ($(OFA_LINUX_CONFIG),)
+
+# case #1
+include autoMakefile
+
+else
+
+# case #2
+# Note that this comes from make -C $LINUX -f $OFA/build/Makefile
+# so "include Makefile" below includes $LINUX/Makefile, not this file
+include $(OFA_LINUX_CONFIG)
+include Makefile
+
+endif # OFA_LINUX_CONFIG
+
+else # PATCHLEVEL
+
+# case 3
+
+ifneq ($(OFA_KERNEL_TEST),)
+extra-y = $(OFA_KERNEL_TEST)
+endif
+
+obj-m := conftest.o
+
+endif # PATCHLEVEL
+
+# case 4
+
+echoarch:
+       echo $(ARCH) >$(ARCHFILE)
diff --git a/config/build-linux.m4 b/config/build-linux.m4
new file mode 100644 (file)
index 0000000..c114606
--- /dev/null
@@ -0,0 +1,782 @@
+# LB_CHECK_FILE
+#
+# Check for file existance even when cross compiling
+#
+AC_DEFUN([LB_CHECK_FILE],
+[AS_VAR_PUSHDEF([lb_File], [lb_cv_file_$1])dnl
+AC_CACHE_CHECK([for $1], lb_File,
+[if test -r "$1"; then
+    AS_VAR_SET(lb_File, yes)
+else
+    AS_VAR_SET(lb_File, no)
+fi])
+AS_IF([test AS_VAR_GET(lb_File) = yes], [$2], [$3])[]dnl
+AS_VAR_POPDEF([lb_File])dnl
+])# LB_CHECK_FILE
+
+
+#
+# LB_LINUX_VERSION
+#
+# Set things accordingly for a linux kernel
+#
+AC_DEFUN([LB_LINUX_VERSION],[
+KMODEXT=".ko"
+
+MODULE_TARGET="SUBDIRS"
+makerule="$PWD/build"
+AC_MSG_CHECKING([for external module build support])
+# Support XEN
+XEN_INCLUDES=
+LB_LINUX_CONFIG([XEN],[XEN_INCLUDES='-I$LINUX/arch/x86/include/mach-xen'],[])
+LB_LINUX_CONFIG_VALUE([XEN_INTERFACE_VERSION],[XEN_INCLUDES="$XEN_INCLUDES -D__XEN_INTERFACE_VERSION__=$res"],[XEN_INCLUDES="$XEN_INCLUDES -D__XEN_INTERFACE_VERSION__=$res"])
+#
+rm -f build/conftest.i
+LB_LINUX_TRY_MAKE([],[],
+       [$makerule OFA_KERNEL_TEST=conftest.i],
+       [test -s build/conftest.i],
+       [
+               AC_MSG_RESULT([no])
+       ],[
+               makerule="_module_$makerule"
+               MODULE_TARGET="M"
+               LB_LINUX_TRY_MAKE([],[],
+                       [$makerule OFA_KERNEL_TEST=conftest.i],
+                       [test -s build/conftest.i],
+                       [
+                               AC_MSG_RESULT([yes])
+                       ],[
+                               AC_MSG_ERROR([unknown; check config.log for details])
+                       ])
+       ])
+
+AC_SUBST(MODULE_TARGET)
+AC_SUBST(KMODEXT)
+])
+
+#
+# LB_LINUX_RELEASE
+#
+# get the release version of linux
+#
+AC_DEFUN([LB_LINUX_RELEASE],
+[LINUXRELEASE=
+rm -f build/conftest.i
+AC_MSG_CHECKING([for Linux release])
+if test -s $LINUX_OBJ/include/$AUTOCONF_HDIR/utsrelease.h ; then
+       LINUXRELEASEHEADER=$AUTOCONF_HDIR/utsrelease.h
+else
+       LINUXRELEASEHEADER=linux/version.h
+fi
+LB_LINUX_TRY_MAKE([
+       #include <$LINUXRELEASEHEADER>
+],[
+       char *LINUXRELEASE;
+       LINUXRELEASE=UTS_RELEASE;
+],[
+       $makerule OFA_KERNEL_TEST=conftest.i
+],[
+       test -s build/conftest.i
+],[
+       # LINUXRELEASE="UTS_RELEASE"
+       eval $(grep "LINUXRELEASE=" build/conftest.i)
+],[
+       AC_MSG_RESULT([unknown])
+       AC_MSG_ERROR([Could not preprocess test program.  Consult config.log for details.])
+])
+rm -f build/conftest.i
+if test x$LINUXRELEASE = x ; then
+       AC_MSG_RESULT([unknown])
+       AC_MSG_ERROR([Could not determine Linux release version from linux/version.h.])
+fi
+AC_MSG_RESULT([$LINUXRELEASE])
+AC_SUBST(LINUXRELEASE)
+
+moduledir='/lib/modules/'$LINUXRELEASE/updates/kernel
+AC_SUBST(moduledir)
+
+modulefsdir='$(moduledir)/fs/$(PACKAGE)'
+AC_SUBST(modulefsdir)
+
+modulenetdir='$(moduledir)/net/$(PACKAGE)'
+AC_SUBST(modulenetdir)
+
+# ------------ RELEASE --------------------------------
+AC_MSG_CHECKING([for OFA release])
+AC_ARG_WITH([release],
+       AC_HELP_STRING([--with-release=string],
+                      [set the release string (default=$kvers_YYYYMMDDhhmm)]),
+       [RELEASE=$withval],
+       RELEASE=""
+       if test -n "$DOWNSTREAM_RELEASE"; then
+               RELEASE="${DOWNSTREAM_RELEASE}_"
+       fi
+       RELEASE="$RELEASE`echo ${LINUXRELEASE} | tr '-' '_'`_$BUILDID")
+AC_MSG_RESULT($RELEASE)
+AC_SUBST(RELEASE)
+
+# check is redhat/suse kernels
+AC_MSG_CHECKING([that RedHat kernel])
+LB_LINUX_TRY_COMPILE([
+               #include <linux/version.h>
+       ],[
+               #ifndef RHEL_RELEASE_CODE
+               #error "not redhat kernel"
+               #endif
+       ],[
+               RHEL_KERNEL="yes"
+               AC_MSG_RESULT([yes])
+       ],[
+               AC_MSG_RESULT([no])
+])
+
+LB_LINUX_CONFIG([SUSE_KERNEL],[SUSE_KERNEL="yes"],[])
+
+])
+
+# LB_ARG_REPLACE_PATH(PACKAGE, PATH)
+AC_DEFUN([LB_ARG_REPLACE_PATH],[
+       new_configure_args=
+       eval "set x $ac_configure_args"
+       shift
+       for arg; do
+               case $arg in
+                       --with-[$1]=*)
+                               arg=--with-[$1]=[$2]
+                               ;;
+                       *\'*)
+                               arg=$(printf %s\n ["$arg"] | \
+                                     sed "s/'/'\\\\\\\\''/g")
+                               ;;
+               esac
+               dnl AS_VAR_APPEND([new_configure_args], [" '$arg'"])
+               new_configure_args="$new_configure_args \"$arg\""
+       done
+       ac_configure_args=$new_configure_args
+])
+
+# this is the work-horse of the next function
+AC_DEFUN([__LB_ARG_CANON_PATH], [
+       [$3]=$(readlink -f $with_$2)
+       LB_ARG_REPLACE_PATH([$1], $[$3])
+])
+
+# a front-end for the above function that transforms - and . in the
+# PACKAGE portion of --with-PACKAGE into _ suitable for variable names
+AC_DEFUN([LB_ARG_CANON_PATH], [
+       __LB_ARG_CANON_PATH([$1], m4_translit([$1], [-.], [__]), [$2])
+])
+
+#
+#
+# LB_LINUX_PATH
+#
+# Find paths for linux, handling kernel-source rpms
+#
+AC_DEFUN([LB_LINUX_PATH],
+[# prep some default values
+for DEFAULT_LINUX in /lib/modules/$(uname -r)/{source,build} /usr/src/linux; do
+       if readlink -q -e $DEFAULT_LINUX; then
+               break
+       fi
+done
+if test "$DEFAULT_LINUX" = "/lib/modules/$(uname -r)/source"; then
+       PATHS="/lib/modules/$(uname -r)/build"
+fi
+PATHS+=" $DEFAULT_LINUX"
+for DEFAULT_LINUX_OBJ in $PATHS; do
+       if readlink -q -e $DEFAULT_LINUX_OBJ; then
+               break
+       fi
+done
+AC_MSG_CHECKING([for Linux sources])
+AC_ARG_WITH([linux],
+       AC_HELP_STRING([--with-linux=path],
+                      [set path to Linux source (default=/lib/modules/$(uname -r)/{source,build},/usr/src/linux)]),
+       [LB_ARG_CANON_PATH([linux], [LINUX])
+       DEFAULT_LINUX_OBJ=$LINUX],
+       [LINUX=$DEFAULT_LINUX])
+AC_MSG_RESULT([$LINUX])
+AC_SUBST(LINUX)
+
+# -------- check for linux --------
+LB_CHECK_FILE([$LINUX],[],
+       [AC_MSG_ERROR([Kernel source $LINUX could not be found.])])
+
+# -------- linux objects (for 2.6) --
+AC_MSG_CHECKING([for Linux objects dir])
+AC_ARG_WITH([linux-obj],
+       AC_HELP_STRING([--with-linux-obj=path],
+                       [set path to Linux objects dir (default=/lib/modules/$(uname -r)/build,/usr/src/linux)]),
+       [LB_ARG_CANON_PATH([linux-obj], [LINUX_OBJ])],
+       [LINUX_OBJ=$DEFAULT_LINUX_OBJ])
+
+AC_MSG_RESULT([$LINUX_OBJ])
+AC_SUBST(LINUX_OBJ)
+
+# -------- check for .config --------
+AC_ARG_WITH([linux-config],
+       [AC_HELP_STRING([--with-linux-config=path],
+                       [set path to Linux .conf (default=$LINUX_OBJ/.config)])],
+       [LB_ARG_CANON_PATH([linux-config], [LINUX_CONFIG])],
+       [LINUX_CONFIG=$LINUX_OBJ/.config])
+AC_SUBST(LINUX_CONFIG)
+
+LB_CHECK_FILE([/boot/kernel.h],
+       [KERNEL_SOURCE_HEADER='/boot/kernel.h'],
+       [LB_CHECK_FILE([/var/adm/running-kernel.h],
+               [KERNEL_SOURCE_HEADER='/var/adm/running-kernel.h'])])
+
+AC_ARG_WITH([kernel-source-header],
+       AC_HELP_STRING([--with-kernel-source-header=path],
+                       [Use a different kernel version header.  Consult build/README.kernel-source for details.]),
+       [LB_ARG_CANON_PATH([kernel-source-header], [KERNEL_SOURCE_HEADER])])
+
+# ------------ .config exists ----------------
+LB_CHECK_FILE([$LINUX_CONFIG],[],
+       [AC_MSG_ERROR([Kernel config could not be found.  If you are building from a kernel-source rpm consult build/README.kernel-source])])
+
+# ----------- make dep run? ------------------
+# at 2.6.19 # $LINUX/include/linux/config.h is removed
+# and at more old has only one line
+# include <autoconf.h>
+LB_CHECK_FILE([$LINUX_OBJ/include/generated/autoconf.h],[AUTOCONF_HDIR=generated],
+        [LB_CHECK_FILE([$LINUX_OBJ/include/linux/autoconf.h],[AUTOCONF_HDIR=linux],
+       [AC_MSG_ERROR([Run make config in $LINUX.])])])
+        AC_SUBST(AUTOCONF_HDIR)
+
+# ----------- kconfig.h exists ---------------
+# kernel 3.1, $LINUX/include/linux/kconfig.h is added
+# see kernel commit 2a11c8ea20bf850b3a2c60db8c2e7497d28aba99
+LB_CHECK_FILE([$LINUX_OBJ/include/linux/kconfig.h],
+              [CONFIG_INCLUDE=include/linux/kconfig.h],
+              [CONFIG_INCLUDE=include/$AUTOCONF_HDIR/autoconf.h])
+       AC_SUBST(CONFIG_INCLUDE)
+
+# ------------ rhconfig.h includes runtime-generated bits --
+# red hat kernel-source checks
+
+# we know this exists after the check above.  if the user
+# tarred up the tree and ran make dep etc. in it, then
+# version.h gets overwritten with a standard linux one.
+#
+if (grep -q rhconfig $LINUX_OBJ/include/linux/version.h 2>/dev/null) ||
+   (grep -q rhconfig $LINUX_OBJ/include/generated/uapi/linux/version.h 2>/dev/null) ; then
+       # This is a clean kernel-source tree, we need to
+       # enable extensive workarounds to get this to build
+       # modules
+       LB_CHECK_FILE([$KERNEL_SOURCE_HEADER],
+               [if test $KERNEL_SOURCE_HEADER = '/boot/kernel.h' ; then
+                       AC_MSG_WARN([Using /boot/kernel.h from RUNNING kernel.])
+                       AC_MSG_WARN([If this is not what you want, use --with-kernel-source-header.])
+                       AC_MSG_WARN([Consult build/README.kernel-source for details.])
+               fi],
+               [AC_MSG_ERROR([$KERNEL_SOURCE_HEADER not found.  Consult build/README.kernel-source for details.])])
+       EXTRA_KCFLAGS="-include $KERNEL_SOURCE_HEADER $EXTRA_KCFLAGS"
+fi
+
+# this is needed before we can build modules
+LB_LINUX_CROSS
+LB_LINUX_VERSION
+
+# --- check that we can build modules at all
+AC_MSG_CHECKING([that modules can be built at all])
+LB_LINUX_TRY_COMPILE([],[],[
+       AC_MSG_RESULT([yes])
+],[
+       AC_MSG_RESULT([no])
+       AC_MSG_WARN([Consult config.log for details.])
+       AC_MSG_WARN([If you are trying to build with a kernel-source rpm, consult build/README.kernel-source])
+       AC_MSG_ERROR([Kernel modules cannot be built.])
+])
+
+LB_LINUX_RELEASE
+]) # end of LB_LINUX_PATH
+
+# LB_LINUX_SYMVERFILE
+# SLES 9 uses a different name for this file - unsure about vanilla kernels
+# around this version, but it matters for servers only.
+AC_DEFUN([LB_LINUX_SYMVERFILE],
+       [AC_MSG_CHECKING([name of module symbol version file])
+       if grep -q Modules.symvers $LINUX/scripts/Makefile.modpost ; then
+               SYMVERFILE=Modules.symvers
+       else
+               SYMVERFILE=Module.symvers
+       fi
+       AC_MSG_RESULT($SYMVERFILE)
+       AC_SUBST(SYMVERFILE)
+])
+
+#
+# LB_LINUX_CROSS
+#
+# check for cross compilation
+#
+AC_DEFUN([LB_LINUX_CROSS],
+       [AC_MSG_CHECKING([for cross compilation])
+CROSS_VARS=
+case $target_vendor in
+       # The K1OM architecture is an extension of the x86 architecture.
+       # So, the $target_arch is x86_64.
+       k1om)
+               AC_MSG_RESULT([Intel(R) Xeon Phi(TM)])
+               CC_TARGET_ARCH=`$CC -v 2>&1 | grep Target: | sed -e 's/Target: //'`
+               if test $CC_TARGET_ARCH != x86_64-$target_vendor-linux ; then
+                       AC_MSG_ERROR([Cross compiler not found in PATH.])
+               fi
+               CROSS_VARS="ARCH=$target_vendor CROSS_COMPILE=x86_64-$target_vendor-linux-"
+               CCAS=$CC
+               if test x$enable_server = xyes ; then
+                       AC_MSG_WARN([Disabling server (not supported for x86_64-$target_vendor-linux).])
+                       enable_server='no'
+               fi
+               ;;
+       *)
+               AC_MSG_RESULT([no])
+               ;;
+esac
+AC_SUBST(CROSS_VARS)
+])
+
+# these are like AC_TRY_COMPILE, but try to build modules against the
+# kernel, inside the build directory
+
+# LB_LANG_PROGRAM(C)([PROLOGUE], [BODY])
+# --------------------------------------
+m4_define([LB_LANG_PROGRAM],
+[
+#include <linux/kernel.h>
+$1
+int
+main (void)
+{
+dnl Do *not* indent the following line: there may be CPP directives.
+dnl Don't move the `;' right after for the same reason.
+$2
+  ;
+  return 0;
+}])
+
+#
+# LB_LINUX_COMPILE_IFELSE
+#
+# like AC_COMPILE_IFELSE
+#
+AC_DEFUN([LB_LINUX_COMPILE_IFELSE],
+[m4_ifvaln([$1], [AC_LANG_CONFTEST([$1])])dnl
+rm -f build/conftest.o build/conftest.mod.c build/conftest.ko
+AS_IF([AC_TRY_COMMAND(cp conftest.c build && make -d [$2] ${LD:+"LD=$LD"} CC="$CC" -f $PWD/build/Makefile OFA_LINUX_CONFIG=$LINUX_CONFIG LINUXINCLUDE="-include $AUTOCONF_HDIR/autoconf.h $XEN_INCLUDES $EXTRA_OFA_INCLUDE -I$LINUX/arch/$SRCARCH/include -Iarch/$SRCARCH/include/generated -Iinclude -I$LINUX/arch/$SRCARCH/include/uapi -Iarch/$SRCARCH/include/generated/uapi -I$LINUX/include -I$LINUX/include/uapi -Iinclude/generated/uapi  -I$LINUX/arch/$SRCARCH/include -Iarch/$SRCARCH/include/generated -I$LINUX/arch/`echo $target_cpu|sed -e 's/powerpc64/powerpc/' -e 's/x86_64/x86/' -e 's/i.86/x86/'`/include -I$LINUX/arch/`echo $target_cpu|sed -e 's/ppc.*/powerpc/' -e 's/x86_64/x86/' -e 's/i.86/x86/'`/include/generated -I$LINUX_OBJ/include -I$LINUX/include -I$LINUX_OBJ/include2 -include $CONFIG_INCLUDE" -o tmp_include_depends -o scripts -o include/config/MARKER -C $LINUX_OBJ EXTRA_CFLAGS="-Werror-implicit-function-declaration $EXTRA_KCFLAGS" $CROSS_VARS $MODULE_TARGET=$PWD/build) >/dev/null && AC_TRY_COMMAND([$3])],
+       [$4],
+       [_AC_MSG_LOG_CONFTEST
+m4_ifvaln([$5],[$5])dnl])
+rm -f build/conftest.o build/conftest.mod.c build/conftest.mod.o build/conftest.ko m4_ifval([$1], [build/conftest.c conftest.c])[]dnl
+])
+
+#
+# LB_LINUX_ARCH
+#
+# Determine the kernel's idea of the current architecture
+#
+AC_DEFUN([LB_LINUX_ARCH],
+         [AC_MSG_CHECKING([Linux kernel architecture])
+          AS_IF([rm -f $PWD/build/arch
+                 make -s --no-print-directory echoarch -f $PWD/build/Makefile \
+                     OFA_LINUX_CONFIG=$LINUX_CONFIG -C $LINUX $CROSS_VARS  \
+                     ARCHFILE=$PWD/build/arch && LINUX_ARCH=`cat $PWD/build/arch`],
+                [AC_MSG_RESULT([$LINUX_ARCH])],
+                [AC_MSG_ERROR([Could not determine the kernel architecture.])])
+          rm -f build/arch])
+
+#
+# LB_LINUX_TRY_COMPILE
+#
+# like AC_TRY_COMPILE
+#
+AC_DEFUN([LB_LINUX_TRY_COMPILE],
+[LB_LINUX_COMPILE_IFELSE(
+       [AC_LANG_SOURCE([LB_LANG_PROGRAM([[$1]], [[$2]])])],
+       [modules],
+       [test -s build/conftest.o],
+       [$3], [$4])])
+
+#
+# LB_LINUX_CONFIG
+#
+# check if a given config option is defined
+#
+AC_DEFUN([LB_LINUX_CONFIG],[
+       AC_MSG_CHECKING([if Linux was built with CONFIG_$1])
+       LB_LINUX_TRY_COMPILE([
+               #include <$AUTOCONF_HDIR/autoconf.h>
+       ],[
+               #ifndef CONFIG_$1
+               #error CONFIG_$1 not #defined
+               #endif
+       ],[
+               AC_MSG_RESULT([yes])
+               $2
+       ],[
+               AC_MSG_RESULT([no])
+               $3
+       ])
+])
+
+#
+# LB_LINUX_CONFIG_IM
+#
+# check if a given config option is builtin or as module
+#
+AC_DEFUN([LB_LINUX_CONFIG_IM],[
+       AC_MSG_CHECKING([if Linux was built with CONFIG_$1 in or as module])
+       LB_LINUX_TRY_COMPILE([
+               #include <$AUTOCONF_HDIR/autoconf.h>
+       ],[
+               #if !(defined(CONFIG_$1) || defined(CONFIG_$1_MODULE))
+               #error CONFIG_$1 and CONFIG_$1_MODULE not #defined
+               #endif
+       ],[
+               AC_MSG_RESULT([yes])
+               $2
+       ],[
+               AC_MSG_RESULT([no])
+               $3
+       ])
+])
+
+#
+# LB_LINUX_TRY_MAKE
+#
+# like LB_LINUX_TRY_COMPILE, but with different arguments
+#
+AC_DEFUN([LB_LINUX_TRY_MAKE],
+       [LB_LINUX_COMPILE_IFELSE(
+               [AC_LANG_SOURCE([LB_LANG_PROGRAM([[$1]], [[$2]])])],
+               [$3], [$4], [$5], [$6]
+       )]
+)
+
+#
+# LB_CONFIG_COMPAT_RDMA
+#
+AC_DEFUN([LB_CONFIG_COMPAT_RDMA],
+[AC_MSG_CHECKING([whether to use Compat RDMA])
+# set default
+AC_ARG_WITH([o2ib],
+       AC_HELP_STRING([--with-o2ib=path],
+                      [build o2iblnd against path]),
+       [
+               case $with_o2ib in
+               yes)    O2IBPATHS="$LINUX $LINUX/drivers/infiniband"
+                       ENABLEO2IB=2
+                       ;;
+               no)     ENABLEO2IB=0
+                       ;;
+               *)      O2IBPATHS=$with_o2ib
+                       ENABLEO2IB=3
+                       ;;
+               esac
+       ],[
+               O2IBPATHS="$LINUX $LINUX/drivers/infiniband"
+               ENABLEO2IB=1
+       ])
+if test $ENABLEO2IB -eq 0; then
+       AC_MSG_RESULT([no])
+else
+       o2ib_found=false
+       for O2IBPATH in $O2IBPATHS; do
+               if test \( -f ${O2IBPATH}/include/rdma/rdma_cm.h -a \
+                          -f ${O2IBPATH}/include/rdma/ib_cm.h -a \
+                          -f ${O2IBPATH}/include/rdma/ib_verbs.h -a \
+                          -f ${O2IBPATH}/include/rdma/ib_fmr_pool.h \); then
+                       o2ib_found=true
+                       break
+               fi
+       done
+       compatrdma_found=false
+       if $o2ib_found; then
+               if test \( -f ${O2IBPATH}/include/linux/compat-2.6.h \); then
+                       compatrdma_found=true
+                       AC_MSG_RESULT([yes])
+                       AC_DEFINE(HAVE_COMPAT_RDMA, 1, [compat rdma found])
+               else
+                       AC_MSG_RESULT([no])
+               fi
+       fi
+fi
+])
+
+#
+# LB_CONFIG_OFED_BACKPORTS
+#
+# include any OFED backport headers in all compile commands
+# NOTE: this does only include the backport paths, not the OFED headers
+#       adding the OFED headers is done in the lnet portion
+AC_DEFUN([LB_CONFIG_OFED_BACKPORTS],
+[AC_MSG_CHECKING([whether to use any OFED backport headers])
+if test $ENABLEO2IB -eq 0; then
+       AC_MSG_RESULT([no])
+else
+       if ! $o2ib_found; then
+               AC_MSG_RESULT([no])
+               case $ENABLEO2IB in
+                       1) ;;
+                       2) AC_MSG_ERROR([kernel OpenIB gen2 headers not present]);;
+                       3) AC_MSG_ERROR([bad --with-o2ib path]);;
+                       *) AC_MSG_ERROR([internal error]);;
+               esac
+       else
+               if ! $compatrdma_found; then
+                       if test -f $O2IBPATH/config.mk; then
+                               . $O2IBPATH/config.mk
+                       elif test -f $O2IBPATH/ofed_patch.mk; then
+                               . $O2IBPATH/ofed_patch.mk
+                       fi
+               fi
+               if test -n "$BACKPORT_INCLUDES"; then
+                       OFED_BACKPORT_PATH="$O2IBPATH/${BACKPORT_INCLUDES/*\/kernel_addons/kernel_addons}/"
+                       EXTRA_LNET_INCLUDE="-I$OFED_BACKPORT_PATH $EXTRA_LNET_INCLUDE"
+                       AC_MSG_RESULT([yes])
+               else
+                       AC_MSG_RESULT([no])
+               fi
+       fi
+fi
+])
+
+# LC_MODULE_LOADING
+# after 2.6.28 CONFIG_KMOD is removed, and only CONFIG_MODULES remains
+# so we test if request_module is implemented or not
+AC_DEFUN([LC_MODULE_LOADING],
+[AC_MSG_CHECKING([if kernel module loading is possible])
+LB_LINUX_TRY_MAKE([
+       #include <linux/kmod.h>
+],[
+       int myretval=ENOSYS ;
+       return myretval;
+],[
+       $makerule OFA_KERNEL_TEST=conftest.i
+],[dnl
+       grep request_module build/conftest.i |dnl
+               grep -v `grep "int myretval=" build/conftest.i |dnl
+                       cut -d= -f2 | cut -d" "  -f1`dnl
+               >/dev/null dnl
+],[
+       AC_MSG_RESULT(yes)
+       AC_DEFINE(HAVE_MODULE_LOADING_SUPPORT, 1,
+                 [kernel module loading is possible])
+],[
+       AC_MSG_RESULT(no)
+       AC_MSG_WARN([])
+       AC_MSG_WARN([Kernel module loading support is highly recommended.])
+       AC_MSG_WARN([])
+])
+])
+
+#
+# LB_PROG_LINUX
+#
+# linux tests
+#
+AC_DEFUN([LB_PROG_LINUX],
+[LB_LINUX_PATH
+LB_LINUX_ARCH
+LB_LINUX_SYMVERFILE
+
+
+LB_LINUX_CONFIG([MODULES],[],[
+       AC_MSG_ERROR([module support is required to build OFA kernel modules.])
+])
+
+LB_LINUX_CONFIG([MODVERSIONS])
+
+LB_LINUX_CONFIG([KALLSYMS],[],[
+       AC_MSG_ERROR([compat_mlnx requires that CONFIG_KALLSYMS is enabled in your kernel.])
+])
+
+# 2.6.28
+LC_MODULE_LOADING
+
+LB_CONFIG_COMPAT_RDMA
+
+# it's ugly to be doing anything with OFED outside of the lnet module, but
+# this has to be done here so that the backports path is set before all of
+# the LN_PROG_LINUX checks are done
+LB_CONFIG_OFED_BACKPORTS
+])
+
+#
+# LB_CHECK_SYMBOL_EXPORT
+# check symbol exported or not
+# $1 - symbol
+# $2 - file(s) for find.
+# $3 - do 'yes'
+# $4 - do 'no'
+#
+# 2.6 based kernels - put modversion info into $LINUX/Module.modvers
+# or check
+AC_DEFUN([LB_CHECK_SYMBOL_EXPORT],
+[AC_MSG_CHECKING([if Linux was built with symbol $1 exported])
+grep -q -E '[[[:space:]]]$1[[[:space:]]]' $LINUX/$SYMVERFILE 2>/dev/null
+rc=$?
+if test $rc -ne 0; then
+       export=0
+       for file in $2; do
+               grep -q -E "EXPORT_SYMBOL.*\($1\)" "$LINUX/$file" 2>/dev/null
+               rc=$?
+               if test $rc -eq 0; then
+                       export=1
+                       break;
+               fi
+       done
+       if test $export -eq 0; then
+               AC_MSG_RESULT([no])
+               $4
+       else
+               AC_MSG_RESULT([yes])
+               $3
+       fi
+else
+       AC_MSG_RESULT([yes])
+       $3
+fi
+])
+
+#
+# Like AC_CHECK_HEADER but checks for a kernel-space header
+#
+m4_define([LB_CHECK_LINUX_HEADER],
+[AS_VAR_PUSHDEF([ac_Header], [ac_cv_header_$1])dnl
+AC_CACHE_CHECK([for $1], ac_Header,
+              [LB_LINUX_COMPILE_IFELSE([LB_LANG_PROGRAM([@%:@include <$1>])],
+                                 [modules],
+                                 [test -s build/conftest.o],
+                                 [AS_VAR_SET(ac_Header, [yes])],
+                                 [AS_VAR_SET(ac_Header, [no])])])
+AS_IF([test AS_VAR_GET(ac_Header) = yes], [$2], [$3])[]dnl
+AS_VAR_POPDEF([ac_Header])dnl
+])
+
+#
+# LB_USES_DPKG
+#
+# Determine if the target is a dpkg system or rpm
+#
+AC_DEFUN([LB_USES_DPKG],
+[
+AC_MSG_CHECKING([if this distro uses dpkg])
+case `lsb_release -i -s 2>/dev/null` in
+        Ubuntu | Debian)
+                AC_MSG_RESULT([yes])
+                uses_dpkg=yes
+                ;;
+        *)
+                AC_MSG_RESULT([no])
+                uses_dpkg=no
+                ;;
+esac
+])
+
+#
+# LB_PROG_CC
+#
+# checks on the C compiler
+#
+AC_DEFUN([LB_PROG_CC],
+[AC_PROG_RANLIB
+AC_CHECK_TOOL(LD, ld, [no])
+AC_CHECK_TOOL(OBJDUMP, objdump, [no])
+AC_CHECK_TOOL(STRIP, strip, [no])
+
+# ---------  unsigned long long sane? -------
+AC_CHECK_SIZEOF(unsigned long long, 0)
+echo "---> size SIZEOF $SIZEOF_unsigned_long_long"
+echo "---> size SIZEOF $ac_cv_sizeof_unsigned_long_long"
+if test $ac_cv_sizeof_unsigned_long_long != 8 ; then
+       AC_MSG_ERROR([** we assume that sizeof(long long) == 8.])
+fi
+
+if test $target_cpu == "powerpc64"; then
+       AC_MSG_WARN([set compiler with -m64])
+       CFLAGS="$CFLAGS -m64"
+       CC="$CC -m64"
+fi
+])
+
+# LB_CONTITIONALS
+#
+AC_DEFUN([LB_CONDITIONALS],
+[
+AM_CONDITIONAL(ARCH_x86, test x$target_cpu = "xx86_64" -o x$target_cpu = "xi686")
+
+AC_OUTPUT
+
+cat <<_ACEOF
+
+CC:            $CC
+LD:            $LD
+CFLAGS:        $CFLAGS
+EXTRA_KCFLAGS: $EXTRA_KCFLAGS
+
+Type 'make' to build kernel modules.
+_ACEOF
+])
+
+#
+# SET_BUILD_ARCH
+#
+AC_DEFUN([SET_BUILD_ARCH],
+[ARCH=${ARCH:-$(uname -m | sed -e s/i.86/x86/ -e s/x86_64/x86/ \
+                       -e s/sun4u/sparc64/ \
+                       -e s/arm.*/arm/ -e s/sa110/arm/ \
+                       -e s/s390x/s390/ -e s/parisc64/parisc/ \
+                       -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
+                       -e s/sh[234].*/sh/ -e s/aarch64.*/arm64/ )}
+
+SRCARCH=${SRCARCH:-$ARCH}
+
+# Additional ARCH settings for x86
+if [[ "$ARCH" == "i386" ]]; then
+       SRCARCH=x86
+fi
+if [[ "$ARCH" == "x86_64" ]]; then
+       SRCARCH=x86
+fi
+
+# Additional ARCH settings for sparc
+if [[ "$ARCH" == "sparc32" ]]; then
+       SRCARCH=sparc
+fi
+if [[ "$ARCH" == "sparc64" ]]; then
+       SRCARCH=sparc
+fi
+
+# Additional ARCH settings for sh
+if [[ "$ARCH" == "sh64" ]]; then
+       SRCARCH=sh
+fi
+
+# Additional ARCH settings for tile
+if [[ "$ARCH" == "tilepro" ]]; then
+       SRCARCH=tile
+fi
+if [[ "$ARCH" == "tilegx" ]]; then
+       SRCARCH=tile
+fi
+])
+
+#
+# LB_LINUX_CONFIG_VALUE
+#
+#  get a given config's option value
+#
+AC_DEFUN([LB_LINUX_CONFIG_VALUE],[
+       AC_MSG_CHECKING([get value of CONFIG_$1])
+       if (grep -q "^#define CONFIG_$1 " $LINUX_OBJ/include/$AUTOCONF_HDIR/autoconf.h 2>/dev/null); then
+               res=$(grep "^#define CONFIG_$1 " $LINUX_OBJ/include/$AUTOCONF_HDIR/autoconf.h 2>/dev/null | cut -d' ' -f'3')
+               AC_MSG_RESULT([$1 value is '$res'])
+               $2
+       else
+               AC_MSG_RESULT([$1 in not defined in autoconf.h])
+               $3
+       fi
+])
diff --git a/config/config.guess b/config/config.guess
new file mode 100644 (file)
index 0000000..dc84c68
--- /dev/null
@@ -0,0 +1,1501 @@
+#! /bin/sh
+# Attempt to guess a canonical system name.
+#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
+#   Free Software Foundation, Inc.
+
+timestamp='2009-11-20'
+
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
+# 02110-1301, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+
+# Originally written by Per Bothner.  Please send patches (context
+# diff format) to <config-patches@gnu.org> and include a ChangeLog
+# entry.
+#
+# This script attempts to guess a canonical system name similar to
+# config.sub.  If it succeeds, it prints the system name on stdout, and
+# exits with 0.  Otherwise, it exits with 1.
+#
+# You can get the latest version of this script from:
+# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION]
+
+Output the configuration name of the system \`$me' is run on.
+
+Operation modes:
+  -h, --help         print this help, then exit
+  -t, --time-stamp   print date of last modification, then exit
+  -v, --version      print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.guess ($timestamp)
+
+Originally written by Per Bothner.
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
+2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions.  There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+  case $1 in
+    --time-stamp | --time* | -t )
+       echo "$timestamp" ; exit ;;
+    --version | -v )
+       echo "$version" ; exit ;;
+    --help | --h* | -h )
+       echo "$usage"; exit ;;
+    -- )     # Stop option processing
+       shift; break ;;
+    - )        # Use stdin as input.
+       break ;;
+    -* )
+       echo "$me: invalid option $1$help" >&2
+       exit 1 ;;
+    * )
+       break ;;
+  esac
+done
+
+if test $# != 0; then
+  echo "$me: too many arguments$help" >&2
+  exit 1
+fi
+
+trap 'exit 1' 1 2 15
+
+# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
+# compiler to aid in system detection is discouraged as it requires
+# temporary files to be created and, as you can see below, it is a
+# headache to deal with in a portable fashion.
+
+# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
+# use `HOST_CC' if defined, but it is deprecated.
+
+# Portable tmp directory creation inspired by the Autoconf team.
+
+set_cc_for_build='
+trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
+trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
+: ${TMPDIR=/tmp} ;
+ { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
+ { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
+ { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
+ { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
+dummy=$tmp/dummy ;
+tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
+case $CC_FOR_BUILD,$HOST_CC,$CC in
+ ,,)    echo "int x;" > $dummy.c ;
+       for c in cc gcc c89 c99 ; do
+         if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
+            CC_FOR_BUILD="$c"; break ;
+         fi ;
+       done ;
+       if test x"$CC_FOR_BUILD" = x ; then
+         CC_FOR_BUILD=no_compiler_found ;
+       fi
+       ;;
+ ,,*)   CC_FOR_BUILD=$CC ;;
+ ,*,*)  CC_FOR_BUILD=$HOST_CC ;;
+esac ; set_cc_for_build= ;'
+
+# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
+# (ghazi@noc.rutgers.edu 1994-08-24)
+if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
+       PATH=$PATH:/.attbin ; export PATH
+fi
+
+UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
+UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
+UNAME_SYSTEM=`(uname -s) 2>/dev/null`  || UNAME_SYSTEM=unknown
+UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
+
+# Note: order is significant - the case branches are not exclusive.
+
+case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
+    *:NetBSD:*:*)
+       # NetBSD (nbsd) targets should (where applicable) match one or
+       # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
+       # *-*-netbsdecoff* and *-*-netbsd*.  For targets that recently
+       # switched to ELF, *-*-netbsd* would select the old
+       # object file format.  This provides both forward
+       # compatibility and a consistent mechanism for selecting the
+       # object file format.
+       #
+       # Note: NetBSD doesn't particularly care about the vendor
+       # portion of the name.  We always set it to "unknown".
+       sysctl="sysctl -n hw.machine_arch"
+       UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
+           /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
+       case "${UNAME_MACHINE_ARCH}" in
+           armeb) machine=armeb-unknown ;;
+           arm*) machine=arm-unknown ;;
+           sh3el) machine=shl-unknown ;;
+           sh3eb) machine=sh-unknown ;;
+           sh5el) machine=sh5le-unknown ;;
+           *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
+       esac
+       # The Operating System including object format, if it has switched
+       # to ELF recently, or will in the future.
+       case "${UNAME_MACHINE_ARCH}" in
+           arm*|i386|m68k|ns32k|sh3*|sparc|vax)
+               eval $set_cc_for_build
+               if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
+                       | grep -q __ELF__
+               then
+                   # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
+                   # Return netbsd for either.  FIX?
+                   os=netbsd
+               else
+                   os=netbsdelf
+               fi
+               ;;
+           *)
+               os=netbsd
+               ;;
+       esac
+       # The OS release
+       # Debian GNU/NetBSD machines have a different userland, and
+       # thus, need a distinct triplet. However, they do not need
+       # kernel version information, so it can be replaced with a
+       # suitable tag, in the style of linux-gnu.
+       case "${UNAME_VERSION}" in
+           Debian*)
+               release='-gnu'
+               ;;
+           *)
+               release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+               ;;
+       esac
+       # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
+       # contains redundant information, the shorter form:
+       # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
+       echo "${machine}-${os}${release}"
+       exit ;;
+    *:OpenBSD:*:*)
+       UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
+       echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
+       exit ;;
+    *:ekkoBSD:*:*)
+       echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
+       exit ;;
+    *:SolidBSD:*:*)
+       echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE}
+       exit ;;
+    macppc:MirBSD:*:*)
+       echo powerpc-unknown-mirbsd${UNAME_RELEASE}
+       exit ;;
+    *:MirBSD:*:*)
+       echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
+       exit ;;
+    alpha:OSF1:*:*)
+       case $UNAME_RELEASE in
+       *4.0)
+               UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
+               ;;
+       *5.*)
+               UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
+               ;;
+       esac
+       # According to Compaq, /usr/sbin/psrinfo has been available on
+       # OSF/1 and Tru64 systems produced since 1995.  I hope that
+       # covers most systems running today.  This code pipes the CPU
+       # types through head -n 1, so we only detect the type of CPU 0.
+       ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^  The alpha \(.*\) processor.*$/\1/p' | head -n 1`
+       case "$ALPHA_CPU_TYPE" in
+           "EV4 (21064)")
+               UNAME_MACHINE="alpha" ;;
+           "EV4.5 (21064)")
+               UNAME_MACHINE="alpha" ;;
+           "LCA4 (21066/21068)")
+               UNAME_MACHINE="alpha" ;;
+           "EV5 (21164)")
+               UNAME_MACHINE="alphaev5" ;;
+           "EV5.6 (21164A)")
+               UNAME_MACHINE="alphaev56" ;;
+           "EV5.6 (21164PC)")
+               UNAME_MACHINE="alphapca56" ;;
+           "EV5.7 (21164PC)")
+               UNAME_MACHINE="alphapca57" ;;
+           "EV6 (21264)")
+               UNAME_MACHINE="alphaev6" ;;
+           "EV6.7 (21264A)")
+               UNAME_MACHINE="alphaev67" ;;
+           "EV6.8CB (21264C)")
+               UNAME_MACHINE="alphaev68" ;;
+           "EV6.8AL (21264B)")
+               UNAME_MACHINE="alphaev68" ;;
+           "EV6.8CX (21264D)")
+               UNAME_MACHINE="alphaev68" ;;
+           "EV6.9A (21264/EV69A)")
+               UNAME_MACHINE="alphaev69" ;;
+           "EV7 (21364)")
+               UNAME_MACHINE="alphaev7" ;;
+           "EV7.9 (21364A)")
+               UNAME_MACHINE="alphaev79" ;;
+       esac
+       # A Pn.n version is a patched version.
+       # A Vn.n version is a released version.
+       # A Tn.n version is a released field test version.
+       # A Xn.n version is an unreleased experimental baselevel.
+       # 1.2 uses "1.2" for uname -r.
+       echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+       exit ;;
+    Alpha\ *:Windows_NT*:*)
+       # How do we know it's Interix rather than the generic POSIX subsystem?
+       # Should we change UNAME_MACHINE based on the output of uname instead
+       # of the specific Alpha model?
+       echo alpha-pc-interix
+       exit ;;
+    21064:Windows_NT:50:3)
+       echo alpha-dec-winnt3.5
+       exit ;;
+    Amiga*:UNIX_System_V:4.0:*)
+       echo m68k-unknown-sysv4
+       exit ;;
+    *:[Aa]miga[Oo][Ss]:*:*)
+       echo ${UNAME_MACHINE}-unknown-amigaos
+       exit ;;
+    *:[Mm]orph[Oo][Ss]:*:*)
+       echo ${UNAME_MACHINE}-unknown-morphos
+       exit ;;
+    *:OS/390:*:*)
+       echo i370-ibm-openedition
+       exit ;;
+    *:z/VM:*:*)
+       echo s390-ibm-zvmoe
+       exit ;;
+    *:OS400:*:*)
+        echo powerpc-ibm-os400
+       exit ;;
+    arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
+       echo arm-acorn-riscix${UNAME_RELEASE}
+       exit ;;
+    arm:riscos:*:*|arm:RISCOS:*:*)
+       echo arm-unknown-riscos
+       exit ;;
+    SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
+       echo hppa1.1-hitachi-hiuxmpp
+       exit ;;
+    Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
+       # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
+       if test "`(/bin/universe) 2>/dev/null`" = att ; then
+               echo pyramid-pyramid-sysv3
+       else
+               echo pyramid-pyramid-bsd
+       fi
+       exit ;;
+    NILE*:*:*:dcosx)
+       echo pyramid-pyramid-svr4
+       exit ;;
+    DRS?6000:unix:4.0:6*)
+       echo sparc-icl-nx6
+       exit ;;
+    DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
+       case `/usr/bin/uname -p` in
+           sparc) echo sparc-icl-nx7; exit ;;
+       esac ;;
+    s390x:SunOS:*:*)
+       echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+       exit ;;
+    sun4H:SunOS:5.*:*)
+       echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+       exit ;;
+    sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
+       echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+       exit ;;
+    i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*)
+       echo i386-pc-auroraux${UNAME_RELEASE}
+       exit ;;
+    i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
+       eval $set_cc_for_build
+       SUN_ARCH="i386"
+       # If there is a compiler, see if it is configured for 64-bit objects.
+       # Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
+       # This test works for both compilers.
+       if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
+           if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
+               (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
+               grep IS_64BIT_ARCH >/dev/null
+           then
+               SUN_ARCH="x86_64"
+           fi
+       fi
+       echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+       exit ;;
+    sun4*:SunOS:6*:*)
+       # According to config.sub, this is the proper way to canonicalize
+       # SunOS6.  Hard to guess exactly what SunOS6 will be like, but
+       # it's likely to be more like Solaris than SunOS4.
+       echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+       exit ;;
+    sun4*:SunOS:*:*)
+       case "`/usr/bin/arch -k`" in
+           Series*|S4*)
+               UNAME_RELEASE=`uname -v`
+               ;;
+       esac
+       # Japanese Language versions have a version number like `4.1.3-JL'.
+       echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
+       exit ;;
+    sun3*:SunOS:*:*)
+       echo m68k-sun-sunos${UNAME_RELEASE}
+       exit ;;
+    sun*:*:4.2BSD:*)
+       UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
+       test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
+       case "`/bin/arch`" in
+           sun3)
+               echo m68k-sun-sunos${UNAME_RELEASE}
+               ;;
+           sun4)
+               echo sparc-sun-sunos${UNAME_RELEASE}
+               ;;
+       esac
+       exit ;;
+    aushp:SunOS:*:*)
+       echo sparc-auspex-sunos${UNAME_RELEASE}
+       exit ;;
+    # The situation for MiNT is a little confusing.  The machine name
+    # can be virtually everything (everything which is not
+    # "atarist" or "atariste" at least should have a processor
+    # > m68000).  The system name ranges from "MiNT" over "FreeMiNT"
+    # to the lowercase version "mint" (or "freemint").  Finally
+    # the system name "TOS" denotes a system which is actually not
+    # MiNT.  But MiNT is downward compatible to TOS, so this should
+    # be no problem.
+    atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
+        echo m68k-atari-mint${UNAME_RELEASE}
+       exit ;;
+    atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
+       echo m68k-atari-mint${UNAME_RELEASE}
+        exit ;;
+    *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
+        echo m68k-atari-mint${UNAME_RELEASE}
+       exit ;;
+    milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
+        echo m68k-milan-mint${UNAME_RELEASE}
+        exit ;;
+    hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
+        echo m68k-hades-mint${UNAME_RELEASE}
+        exit ;;
+    *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
+        echo m68k-unknown-mint${UNAME_RELEASE}
+        exit ;;
+    m68k:machten:*:*)
+       echo m68k-apple-machten${UNAME_RELEASE}
+       exit ;;
+    powerpc:machten:*:*)
+       echo powerpc-apple-machten${UNAME_RELEASE}
+       exit ;;
+    RISC*:Mach:*:*)
+       echo mips-dec-mach_bsd4.3
+       exit ;;
+    RISC*:ULTRIX:*:*)
+       echo mips-dec-ultrix${UNAME_RELEASE}
+       exit ;;
+    VAX*:ULTRIX*:*:*)
+       echo vax-dec-ultrix${UNAME_RELEASE}
+       exit ;;
+    2020:CLIX:*:* | 2430:CLIX:*:*)
+       echo clipper-intergraph-clix${UNAME_RELEASE}
+       exit ;;
+    mips:*:*:UMIPS | mips:*:*:RISCos)
+       eval $set_cc_for_build
+       sed 's/^        //' << EOF >$dummy.c
+#ifdef __cplusplus
+#include <stdio.h>  /* for printf() prototype */
+       int main (int argc, char *argv[]) {
+#else
+       int main (argc, argv) int argc; char *argv[]; {
+#endif
+       #if defined (host_mips) && defined (MIPSEB)
+       #if defined (SYSTYPE_SYSV)
+         printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
+       #endif
+       #if defined (SYSTYPE_SVR4)
+         printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
+       #endif
+       #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
+         printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
+       #endif
+       #endif
+         exit (-1);
+       }
+EOF
+       $CC_FOR_BUILD -o $dummy $dummy.c &&
+         dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
+         SYSTEM_NAME=`$dummy $dummyarg` &&
+           { echo "$SYSTEM_NAME"; exit; }
+       echo mips-mips-riscos${UNAME_RELEASE}
+       exit ;;
+    Motorola:PowerMAX_OS:*:*)
+       echo powerpc-motorola-powermax
+       exit ;;
+    Motorola:*:4.3:PL8-*)
+       echo powerpc-harris-powermax
+       exit ;;
+    Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
+       echo powerpc-harris-powermax
+       exit ;;
+    Night_Hawk:Power_UNIX:*:*)
+       echo powerpc-harris-powerunix
+       exit ;;
+    m88k:CX/UX:7*:*)
+       echo m88k-harris-cxux7
+       exit ;;
+    m88k:*:4*:R4*)
+       echo m88k-motorola-sysv4
+       exit ;;
+    m88k:*:3*:R3*)
+       echo m88k-motorola-sysv3
+       exit ;;
+    AViiON:dgux:*:*)
+        # DG/UX returns AViiON for all architectures
+        UNAME_PROCESSOR=`/usr/bin/uname -p`
+       if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
+       then
+           if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
+              [ ${TARGET_BINARY_INTERFACE}x = x ]
+           then
+               echo m88k-dg-dgux${UNAME_RELEASE}
+           else
+               echo m88k-dg-dguxbcs${UNAME_RELEASE}
+           fi
+       else
+           echo i586-dg-dgux${UNAME_RELEASE}
+       fi
+       exit ;;
+    M88*:DolphinOS:*:*)        # DolphinOS (SVR3)
+       echo m88k-dolphin-sysv3
+       exit ;;
+    M88*:*:R3*:*)
+       # Delta 88k system running SVR3
+       echo m88k-motorola-sysv3
+       exit ;;
+    XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
+       echo m88k-tektronix-sysv3
+       exit ;;
+    Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
+       echo m68k-tektronix-bsd
+       exit ;;
+    *:IRIX*:*:*)
+       echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
+       exit ;;
+    ????????:AIX?:[12].1:2)   # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
+       echo romp-ibm-aix     # uname -m gives an 8 hex-code CPU id
+       exit ;;               # Note that: echo "'`uname -s`'" gives 'AIX '
+    i*86:AIX:*:*)
+       echo i386-ibm-aix
+       exit ;;
+    ia64:AIX:*:*)
+       if [ -x /usr/bin/oslevel ] ; then
+               IBM_REV=`/usr/bin/oslevel`
+       else
+               IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+       fi
+       echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
+       exit ;;
+    *:AIX:2:3)
+       if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
+               eval $set_cc_for_build
+               sed 's/^                //' << EOF >$dummy.c
+               #include <sys/systemcfg.h>
+
+               main()
+                       {
+                       if (!__power_pc())
+                               exit(1);
+                       puts("powerpc-ibm-aix3.2.5");
+                       exit(0);
+                       }
+EOF
+               if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
+               then
+                       echo "$SYSTEM_NAME"
+               else
+                       echo rs6000-ibm-aix3.2.5
+               fi
+       elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
+               echo rs6000-ibm-aix3.2.4
+       else
+               echo rs6000-ibm-aix3.2
+       fi
+       exit ;;
+    *:AIX:*:[456])
+       IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
+       if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
+               IBM_ARCH=rs6000
+       else
+               IBM_ARCH=powerpc
+       fi
+       if [ -x /usr/bin/oslevel ] ; then
+               IBM_REV=`/usr/bin/oslevel`
+       else
+               IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+       fi
+       echo ${IBM_ARCH}-ibm-aix${IBM_REV}
+       exit ;;
+    *:AIX:*:*)
+       echo rs6000-ibm-aix
+       exit ;;
+    ibmrt:4.4BSD:*|romp-ibm:BSD:*)
+       echo romp-ibm-bsd4.4
+       exit ;;
+    ibmrt:*BSD:*|romp-ibm:BSD:*)            # covers RT/PC BSD and
+       echo romp-ibm-bsd${UNAME_RELEASE}   # 4.3 with uname added to
+       exit ;;                             # report: romp-ibm BSD 4.3
+    *:BOSX:*:*)
+       echo rs6000-bull-bosx
+       exit ;;
+    DPX/2?00:B.O.S.:*:*)
+       echo m68k-bull-sysv3
+       exit ;;
+    9000/[34]??:4.3bsd:1.*:*)
+       echo m68k-hp-bsd
+       exit ;;
+    hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
+       echo m68k-hp-bsd4.4
+       exit ;;
+    9000/[34678]??:HP-UX:*:*)
+       HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+       case "${UNAME_MACHINE}" in
+           9000/31? )            HP_ARCH=m68000 ;;
+           9000/[34]?? )         HP_ARCH=m68k ;;
+           9000/[678][0-9][0-9])
+               if [ -x /usr/bin/getconf ]; then
+                   sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
+                    sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
+                    case "${sc_cpu_version}" in
+                      523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
+                      528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
+                      532)                      # CPU_PA_RISC2_0
+                        case "${sc_kernel_bits}" in
+                          32) HP_ARCH="hppa2.0n" ;;
+                          64) HP_ARCH="hppa2.0w" ;;
+                         '') HP_ARCH="hppa2.0" ;;   # HP-UX 10.20
+                        esac ;;
+                    esac
+               fi
+               if [ "${HP_ARCH}" = "" ]; then
+                   eval $set_cc_for_build
+                   sed 's/^              //' << EOF >$dummy.c
+
+              #define _HPUX_SOURCE
+              #include <stdlib.h>
+              #include <unistd.h>
+
+              int main ()
+              {
+              #if defined(_SC_KERNEL_BITS)
+                  long bits = sysconf(_SC_KERNEL_BITS);
+              #endif
+                  long cpu  = sysconf (_SC_CPU_VERSION);
+
+                  switch (cpu)
+               {
+               case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
+               case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
+               case CPU_PA_RISC2_0:
+              #if defined(_SC_KERNEL_BITS)
+                   switch (bits)
+                       {
+                       case 64: puts ("hppa2.0w"); break;
+                       case 32: puts ("hppa2.0n"); break;
+                       default: puts ("hppa2.0"); break;
+                       } break;
+              #else  /* !defined(_SC_KERNEL_BITS) */
+                   puts ("hppa2.0"); break;
+              #endif
+               default: puts ("hppa1.0"); break;
+               }
+                  exit (0);
+              }
+EOF
+                   (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
+                   test -z "$HP_ARCH" && HP_ARCH=hppa
+               fi ;;
+       esac
+       if [ ${HP_ARCH} = "hppa2.0w" ]
+       then
+           eval $set_cc_for_build
+
+           # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
+           # 32-bit code.  hppa64-hp-hpux* has the same kernel and a compiler
+           # generating 64-bit code.  GNU and HP use different nomenclature:
+           #
+           # $ CC_FOR_BUILD=cc ./config.guess
+           # => hppa2.0w-hp-hpux11.23
+           # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
+           # => hppa64-hp-hpux11.23
+
+           if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
+               grep -q __LP64__
+           then
+               HP_ARCH="hppa2.0w"
+           else
+               HP_ARCH="hppa64"
+           fi
+       fi
+       echo ${HP_ARCH}-hp-hpux${HPUX_REV}
+       exit ;;
+    ia64:HP-UX:*:*)
+       HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+       echo ia64-hp-hpux${HPUX_REV}
+       exit ;;
+    3050*:HI-UX:*:*)
+       eval $set_cc_for_build
+       sed 's/^        //' << EOF >$dummy.c
+       #include <unistd.h>
+       int
+       main ()
+       {
+         long cpu = sysconf (_SC_CPU_VERSION);
+         /* The order matters, because CPU_IS_HP_MC68K erroneously returns
+            true for CPU_PA_RISC1_0.  CPU_IS_PA_RISC returns correct
+            results, however.  */
+         if (CPU_IS_PA_RISC (cpu))
+           {
+             switch (cpu)
+               {
+                 case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
+                 case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
+                 case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
+                 default: puts ("hppa-hitachi-hiuxwe2"); break;
+               }
+           }
+         else if (CPU_IS_HP_MC68K (cpu))
+           puts ("m68k-hitachi-hiuxwe2");
+         else puts ("unknown-hitachi-hiuxwe2");
+         exit (0);
+       }
+EOF
+       $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
+               { echo "$SYSTEM_NAME"; exit; }
+       echo unknown-hitachi-hiuxwe2
+       exit ;;
+    9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
+       echo hppa1.1-hp-bsd
+       exit ;;
+    9000/8??:4.3bsd:*:*)
+       echo hppa1.0-hp-bsd
+       exit ;;
+    *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
+       echo hppa1.0-hp-mpeix
+       exit ;;
+    hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
+       echo hppa1.1-hp-osf
+       exit ;;
+    hp8??:OSF1:*:*)
+       echo hppa1.0-hp-osf
+       exit ;;
+    i*86:OSF1:*:*)
+       if [ -x /usr/sbin/sysversion ] ; then
+           echo ${UNAME_MACHINE}-unknown-osf1mk
+       else
+           echo ${UNAME_MACHINE}-unknown-osf1
+       fi
+       exit ;;
+    parisc*:Lites*:*:*)
+       echo hppa1.1-hp-lites
+       exit ;;
+    C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
+       echo c1-convex-bsd
+        exit ;;
+    C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
+       if getsysinfo -f scalar_acc
+       then echo c32-convex-bsd
+       else echo c2-convex-bsd
+       fi
+        exit ;;
+    C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
+       echo c34-convex-bsd
+        exit ;;
+    C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
+       echo c38-convex-bsd
+        exit ;;
+    C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
+       echo c4-convex-bsd
+        exit ;;
+    CRAY*Y-MP:*:*:*)
+       echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+       exit ;;
+    CRAY*[A-Z]90:*:*:*)
+       echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
+       | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
+             -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
+             -e 's/\.[^.]*$/.X/'
+       exit ;;
+    CRAY*TS:*:*:*)
+       echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+       exit ;;
+    CRAY*T3E:*:*:*)
+       echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+       exit ;;
+    CRAY*SV1:*:*:*)
+       echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+       exit ;;
+    *:UNICOS/mp:*:*)
+       echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+       exit ;;
+    F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
+       FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+        FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+        FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
+        echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+        exit ;;
+    5000:UNIX_System_V:4.*:*)
+        FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+        FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
+        echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+       exit ;;
+    i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
+       echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
+       exit ;;
+    sparc*:BSD/OS:*:*)
+       echo sparc-unknown-bsdi${UNAME_RELEASE}
+       exit ;;
+    *:BSD/OS:*:*)
+       echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
+       exit ;;
+    *:FreeBSD:*:*)
+       case ${UNAME_MACHINE} in
+           pc98)
+               echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+           amd64)
+               echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+           *)
+               echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+       esac
+       exit ;;
+    i*:CYGWIN*:*)
+       echo ${UNAME_MACHINE}-pc-cygwin
+       exit ;;
+    *:MINGW*:*)
+       echo ${UNAME_MACHINE}-pc-mingw32
+       exit ;;
+    i*:windows32*:*)
+       # uname -m includes "-pc" on this system.
+       echo ${UNAME_MACHINE}-mingw32
+       exit ;;
+    i*:PW*:*)
+       echo ${UNAME_MACHINE}-pc-pw32
+       exit ;;
+    *:Interix*:*)
+       case ${UNAME_MACHINE} in
+           x86)
+               echo i586-pc-interix${UNAME_RELEASE}
+               exit ;;
+           authenticamd | genuineintel | EM64T)
+               echo x86_64-unknown-interix${UNAME_RELEASE}
+               exit ;;
+           IA64)
+               echo ia64-unknown-interix${UNAME_RELEASE}
+               exit ;;
+       esac ;;
+    [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
+       echo i${UNAME_MACHINE}-pc-mks
+       exit ;;
+    8664:Windows_NT:*)
+       echo x86_64-pc-mks
+       exit ;;
+    i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
+       # How do we know it's Interix rather than the generic POSIX subsystem?
+       # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
+       # UNAME_MACHINE based on the output of uname instead of i386?
+       echo i586-pc-interix
+       exit ;;
+    i*:UWIN*:*)
+       echo ${UNAME_MACHINE}-pc-uwin
+       exit ;;
+    amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
+       echo x86_64-unknown-cygwin
+       exit ;;
+    p*:CYGWIN*:*)
+       echo powerpcle-unknown-cygwin
+       exit ;;
+    prep*:SunOS:5.*:*)
+       echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+       exit ;;
+    *:GNU:*:*)
+       # the GNU system
+       echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
+       exit ;;
+    *:GNU/*:*:*)
+       # other systems with GNU libc and userland
+       echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
+       exit ;;
+    i*86:Minix:*:*)
+       echo ${UNAME_MACHINE}-pc-minix
+       exit ;;
+    alpha:Linux:*:*)
+       case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
+         EV5)   UNAME_MACHINE=alphaev5 ;;
+         EV56)  UNAME_MACHINE=alphaev56 ;;
+         PCA56) UNAME_MACHINE=alphapca56 ;;
+         PCA57) UNAME_MACHINE=alphapca56 ;;
+         EV6)   UNAME_MACHINE=alphaev6 ;;
+         EV67)  UNAME_MACHINE=alphaev67 ;;
+         EV68*) UNAME_MACHINE=alphaev68 ;;
+        esac
+       objdump --private-headers /bin/sh | grep -q ld.so.1
+       if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
+       echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
+       exit ;;
+    arm*:Linux:*:*)
+       eval $set_cc_for_build
+       if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
+           | grep -q __ARM_EABI__
+       then
+           echo ${UNAME_MACHINE}-unknown-linux-gnu
+       else
+           echo ${UNAME_MACHINE}-unknown-linux-gnueabi
+       fi
+       exit ;;
+    avr32*:Linux:*:*)
+       echo ${UNAME_MACHINE}-unknown-linux-gnu
+       exit ;;
+    cris:Linux:*:*)
+       echo cris-axis-linux-gnu
+       exit ;;
+    crisv32:Linux:*:*)
+       echo crisv32-axis-linux-gnu
+       exit ;;
+    frv:Linux:*:*)
+       echo frv-unknown-linux-gnu
+       exit ;;
+    i*86:Linux:*:*)
+       LIBC=gnu
+       eval $set_cc_for_build
+       sed 's/^        //' << EOF >$dummy.c
+       #ifdef __dietlibc__
+       LIBC=dietlibc
+       #endif
+EOF
+       eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'`
+       echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
+       exit ;;
+    ia64:Linux:*:*)
+       echo ${UNAME_MACHINE}-unknown-linux-gnu
+       exit ;;
+    m32r*:Linux:*:*)
+       echo ${UNAME_MACHINE}-unknown-linux-gnu
+       exit ;;
+    m68*:Linux:*:*)
+       echo ${UNAME_MACHINE}-unknown-linux-gnu
+       exit ;;
+    mips:Linux:*:* | mips64:Linux:*:*)
+       eval $set_cc_for_build
+       sed 's/^        //' << EOF >$dummy.c
+       #undef CPU
+       #undef ${UNAME_MACHINE}
+       #undef ${UNAME_MACHINE}el
+       #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
+       CPU=${UNAME_MACHINE}el
+       #else
+       #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
+       CPU=${UNAME_MACHINE}
+       #else
+       CPU=
+       #endif
+       #endif
+EOF
+       eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'`
+       test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
+       ;;
+    or32:Linux:*:*)
+       echo or32-unknown-linux-gnu
+       exit ;;
+    padre:Linux:*:*)
+       echo sparc-unknown-linux-gnu
+       exit ;;
+    parisc64:Linux:*:* | hppa64:Linux:*:*)
+       echo hppa64-unknown-linux-gnu
+       exit ;;
+    parisc:Linux:*:* | hppa:Linux:*:*)
+       # Look for CPU level
+       case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
+         PA7*) echo hppa1.1-unknown-linux-gnu ;;
+         PA8*) echo hppa2.0-unknown-linux-gnu ;;
+         *)    echo hppa-unknown-linux-gnu ;;
+       esac
+       exit ;;
+    ppc64:Linux:*:*)
+       echo powerpc64-unknown-linux-gnu
+       exit ;;
+    ppc:Linux:*:*)
+       echo powerpc-unknown-linux-gnu
+       exit ;;
+    s390:Linux:*:* | s390x:Linux:*:*)
+       echo ${UNAME_MACHINE}-ibm-linux
+       exit ;;
+    sh64*:Linux:*:*)
+       echo ${UNAME_MACHINE}-unknown-linux-gnu
+       exit ;;
+    sh*:Linux:*:*)
+       echo ${UNAME_MACHINE}-unknown-linux-gnu
+       exit ;;
+    sparc:Linux:*:* | sparc64:Linux:*:*)
+       echo ${UNAME_MACHINE}-unknown-linux-gnu
+       exit ;;
+    vax:Linux:*:*)
+       echo ${UNAME_MACHINE}-dec-linux-gnu
+       exit ;;
+    x86_64:Linux:*:*)
+       echo x86_64-unknown-linux-gnu
+       exit ;;
+    xtensa*:Linux:*:*)
+       echo ${UNAME_MACHINE}-unknown-linux-gnu
+       exit ;;
+    i*86:DYNIX/ptx:4*:*)
+       # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
+       # earlier versions are messed up and put the nodename in both
+       # sysname and nodename.
+       echo i386-sequent-sysv4
+       exit ;;
+    i*86:UNIX_SV:4.2MP:2.*)
+        # Unixware is an offshoot of SVR4, but it has its own version
+        # number series starting with 2...
+        # I am not positive that other SVR4 systems won't match this,
+       # I just have to hope.  -- rms.
+        # Use sysv4.2uw... so that sysv4* matches it.
+       echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
+       exit ;;
+    i*86:OS/2:*:*)
+       # If we were able to find `uname', then EMX Unix compatibility
+       # is probably installed.
+       echo ${UNAME_MACHINE}-pc-os2-emx
+       exit ;;
+    i*86:XTS-300:*:STOP)
+       echo ${UNAME_MACHINE}-unknown-stop
+       exit ;;
+    i*86:atheos:*:*)
+       echo ${UNAME_MACHINE}-unknown-atheos
+       exit ;;
+    i*86:syllable:*:*)
+       echo ${UNAME_MACHINE}-pc-syllable
+       exit ;;
+    i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*)
+       echo i386-unknown-lynxos${UNAME_RELEASE}
+       exit ;;
+    i*86:*DOS:*:*)
+       echo ${UNAME_MACHINE}-pc-msdosdjgpp
+       exit ;;
+    i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
+       UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
+       if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
+               echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
+       else
+               echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
+       fi
+       exit ;;
+    i*86:*:5:[678]*)
+       # UnixWare 7.x, OpenUNIX and OpenServer 6.
+       case `/bin/uname -X | grep "^Machine"` in
+           *486*)           UNAME_MACHINE=i486 ;;
+           *Pentium)        UNAME_MACHINE=i586 ;;
+           *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
+       esac
+       echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
+       exit ;;
+    i*86:*:3.2:*)
+       if test -f /usr/options/cb.name; then
+               UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
+               echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
+       elif /bin/uname -X 2>/dev/null >/dev/null ; then
+               UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
+               (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
+               (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
+                       && UNAME_MACHINE=i586
+               (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
+                       && UNAME_MACHINE=i686
+               (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
+                       && UNAME_MACHINE=i686
+               echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
+       else
+               echo ${UNAME_MACHINE}-pc-sysv32
+       fi
+       exit ;;
+    pc:*:*:*)
+       # Left here for compatibility:
+        # uname -m prints for DJGPP always 'pc', but it prints nothing about
+        # the processor, so we play safe by assuming i586.
+       # Note: whatever this is, it MUST be the same as what config.sub
+       # prints for the "djgpp" host, or else GDB configury will decide that
+       # this is a cross-build.
+       echo i586-pc-msdosdjgpp
+        exit ;;
+    Intel:Mach:3*:*)
+       echo i386-pc-mach3
+       exit ;;
+    paragon:*:*:*)
+       echo i860-intel-osf1
+       exit ;;
+    i860:*:4.*:*) # i860-SVR4
+       if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
+         echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
+       else # Add other i860-SVR4 vendors below as they are discovered.
+         echo i860-unknown-sysv${UNAME_RELEASE}  # Unknown i860-SVR4
+       fi
+       exit ;;
+    mini*:CTIX:SYS*5:*)
+       # "miniframe"
+       echo m68010-convergent-sysv
+       exit ;;
+    mc68k:UNIX:SYSTEM5:3.51m)
+       echo m68k-convergent-sysv
+       exit ;;
+    M680?0:D-NIX:5.3:*)
+       echo m68k-diab-dnix
+       exit ;;
+    M68*:*:R3V[5678]*:*)
+       test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
+    3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
+       OS_REL=''
+       test -r /etc/.relid \
+       && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+       /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+         && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
+       /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+         && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
+    3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
+        /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+          && { echo i486-ncr-sysv4; exit; } ;;
+    NCR*:*:4.2:* | MPRAS*:*:4.2:*)
+       OS_REL='.3'
+       test -r /etc/.relid \
+           && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+       /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+           && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
+       /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+           && { echo i586-ncr-sysv4.3${OS_REL}; exit; }
+       /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \
+           && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
+    m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
+       echo m68k-unknown-lynxos${UNAME_RELEASE}
+       exit ;;
+    mc68030:UNIX_System_V:4.*:*)
+       echo m68k-atari-sysv4
+       exit ;;
+    TSUNAMI:LynxOS:2.*:*)
+       echo sparc-unknown-lynxos${UNAME_RELEASE}
+       exit ;;
+    rs6000:LynxOS:2.*:*)
+       echo rs6000-unknown-lynxos${UNAME_RELEASE}
+       exit ;;
+    PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*)
+       echo powerpc-unknown-lynxos${UNAME_RELEASE}
+       exit ;;
+    SM[BE]S:UNIX_SV:*:*)
+       echo mips-dde-sysv${UNAME_RELEASE}
+       exit ;;
+    RM*:ReliantUNIX-*:*:*)
+       echo mips-sni-sysv4
+       exit ;;
+    RM*:SINIX-*:*:*)
+       echo mips-sni-sysv4
+       exit ;;
+    *:SINIX-*:*:*)
+       if uname -p 2>/dev/null >/dev/null ; then
+               UNAME_MACHINE=`(uname -p) 2>/dev/null`
+               echo ${UNAME_MACHINE}-sni-sysv4
+       else
+               echo ns32k-sni-sysv
+       fi
+       exit ;;
+    PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
+                      # says <Richard.M.Bartel@ccMail.Census.GOV>
+        echo i586-unisys-sysv4
+        exit ;;
+    *:UNIX_System_V:4*:FTX*)
+       # From Gerald Hewes <hewes@openmarket.com>.
+       # How about differentiating between stratus architectures? -djm
+       echo hppa1.1-stratus-sysv4
+       exit ;;
+    *:*:*:FTX*)
+       # From seanf@swdc.stratus.com.
+       echo i860-stratus-sysv4
+       exit ;;
+    i*86:VOS:*:*)
+       # From Paul.Green@stratus.com.
+       echo ${UNAME_MACHINE}-stratus-vos
+       exit ;;
+    *:VOS:*:*)
+       # From Paul.Green@stratus.com.
+       echo hppa1.1-stratus-vos
+       exit ;;
+    mc68*:A/UX:*:*)
+       echo m68k-apple-aux${UNAME_RELEASE}
+       exit ;;
+    news*:NEWS-OS:6*:*)
+       echo mips-sony-newsos6
+       exit ;;
+    R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
+       if [ -d /usr/nec ]; then
+               echo mips-nec-sysv${UNAME_RELEASE}
+       else
+               echo mips-unknown-sysv${UNAME_RELEASE}
+       fi
+        exit ;;
+    BeBox:BeOS:*:*)    # BeOS running on hardware made by Be, PPC only.
+       echo powerpc-be-beos
+       exit ;;
+    BeMac:BeOS:*:*)    # BeOS running on Mac or Mac clone, PPC only.
+       echo powerpc-apple-beos
+       exit ;;
+    BePC:BeOS:*:*)     # BeOS running on Intel PC compatible.
+       echo i586-pc-beos
+       exit ;;
+    BePC:Haiku:*:*)    # Haiku running on Intel PC compatible.
+       echo i586-pc-haiku
+       exit ;;
+    SX-4:SUPER-UX:*:*)
+       echo sx4-nec-superux${UNAME_RELEASE}
+       exit ;;
+    SX-5:SUPER-UX:*:*)
+       echo sx5-nec-superux${UNAME_RELEASE}
+       exit ;;
+    SX-6:SUPER-UX:*:*)
+       echo sx6-nec-superux${UNAME_RELEASE}
+       exit ;;
+    SX-7:SUPER-UX:*:*)
+       echo sx7-nec-superux${UNAME_RELEASE}
+       exit ;;
+    SX-8:SUPER-UX:*:*)
+       echo sx8-nec-superux${UNAME_RELEASE}
+       exit ;;
+    SX-8R:SUPER-UX:*:*)
+       echo sx8r-nec-superux${UNAME_RELEASE}
+       exit ;;
+    Power*:Rhapsody:*:*)
+       echo powerpc-apple-rhapsody${UNAME_RELEASE}
+       exit ;;
+    *:Rhapsody:*:*)
+       echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
+       exit ;;
+    *:Darwin:*:*)
+       UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
+       case $UNAME_PROCESSOR in
+           i386)
+               eval $set_cc_for_build
+               if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
+                 if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
+                     (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
+                     grep IS_64BIT_ARCH >/dev/null
+                 then
+                     UNAME_PROCESSOR="x86_64"
+                 fi
+               fi ;;
+           unknown) UNAME_PROCESSOR=powerpc ;;
+       esac
+       echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
+       exit ;;
+    *:procnto*:*:* | *:QNX:[0123456789]*:*)
+       UNAME_PROCESSOR=`uname -p`
+       if test "$UNAME_PROCESSOR" = "x86"; then
+               UNAME_PROCESSOR=i386
+               UNAME_MACHINE=pc
+       fi
+       echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
+       exit ;;
+    *:QNX:*:4*)
+       echo i386-pc-qnx
+       exit ;;
+    NSE-?:NONSTOP_KERNEL:*:*)
+       echo nse-tandem-nsk${UNAME_RELEASE}
+       exit ;;
+    NSR-?:NONSTOP_KERNEL:*:*)
+       echo nsr-tandem-nsk${UNAME_RELEASE}
+       exit ;;
+    *:NonStop-UX:*:*)
+       echo mips-compaq-nonstopux
+       exit ;;
+    BS2000:POSIX*:*:*)
+       echo bs2000-siemens-sysv
+       exit ;;
+    DS/*:UNIX_System_V:*:*)
+       echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
+       exit ;;
+    *:Plan9:*:*)
+       # "uname -m" is not consistent, so use $cputype instead. 386
+       # is converted to i386 for consistency with other x86
+       # operating systems.
+       if test "$cputype" = "386"; then
+           UNAME_MACHINE=i386
+       else
+           UNAME_MACHINE="$cputype"
+       fi
+       echo ${UNAME_MACHINE}-unknown-plan9
+       exit ;;
+    *:TOPS-10:*:*)
+       echo pdp10-unknown-tops10
+       exit ;;
+    *:TENEX:*:*)
+       echo pdp10-unknown-tenex
+       exit ;;
+    KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
+       echo pdp10-dec-tops20
+       exit ;;
+    XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
+       echo pdp10-xkl-tops20
+       exit ;;
+    *:TOPS-20:*:*)
+       echo pdp10-unknown-tops20
+       exit ;;
+    *:ITS:*:*)
+       echo pdp10-unknown-its
+       exit ;;
+    SEI:*:*:SEIUX)
+        echo mips-sei-seiux${UNAME_RELEASE}
+       exit ;;
+    *:DragonFly:*:*)
+       echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+       exit ;;
+    *:*VMS:*:*)
+       UNAME_MACHINE=`(uname -p) 2>/dev/null`
+       case "${UNAME_MACHINE}" in
+           A*) echo alpha-dec-vms ; exit ;;
+           I*) echo ia64-dec-vms ; exit ;;
+           V*) echo vax-dec-vms ; exit ;;
+       esac ;;
+    *:XENIX:*:SysV)
+       echo i386-pc-xenix
+       exit ;;
+    i*86:skyos:*:*)
+       echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
+       exit ;;
+    i*86:rdos:*:*)
+       echo ${UNAME_MACHINE}-pc-rdos
+       exit ;;
+    i*86:AROS:*:*)
+       echo ${UNAME_MACHINE}-pc-aros
+       exit ;;
+esac
+
+#echo '(No uname command or uname output not recognized.)' 1>&2
+#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
+
+eval $set_cc_for_build
+cat >$dummy.c <<EOF
+#ifdef _SEQUENT_
+# include <sys/types.h>
+# include <sys/utsname.h>
+#endif
+main ()
+{
+#if defined (sony)
+#if defined (MIPSEB)
+  /* BFD wants "bsd" instead of "newsos".  Perhaps BFD should be changed,
+     I don't know....  */
+  printf ("mips-sony-bsd\n"); exit (0);
+#else
+#include <sys/param.h>
+  printf ("m68k-sony-newsos%s\n",
+#ifdef NEWSOS4
+          "4"
+#else
+         ""
+#endif
+         ); exit (0);
+#endif
+#endif
+
+#if defined (__arm) && defined (__acorn) && defined (__unix)
+  printf ("arm-acorn-riscix\n"); exit (0);
+#endif
+
+#if defined (hp300) && !defined (hpux)
+  printf ("m68k-hp-bsd\n"); exit (0);
+#endif
+
+#if defined (NeXT)
+#if !defined (__ARCHITECTURE__)
+#define __ARCHITECTURE__ "m68k"
+#endif
+  int version;
+  version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
+  if (version < 4)
+    printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
+  else
+    printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
+  exit (0);
+#endif
+
+#if defined (MULTIMAX) || defined (n16)
+#if defined (UMAXV)
+  printf ("ns32k-encore-sysv\n"); exit (0);
+#else
+#if defined (CMU)
+  printf ("ns32k-encore-mach\n"); exit (0);
+#else
+  printf ("ns32k-encore-bsd\n"); exit (0);
+#endif
+#endif
+#endif
+
+#if defined (__386BSD__)
+  printf ("i386-pc-bsd\n"); exit (0);
+#endif
+
+#if defined (sequent)
+#if defined (i386)
+  printf ("i386-sequent-dynix\n"); exit (0);
+#endif
+#if defined (ns32000)
+  printf ("ns32k-sequent-dynix\n"); exit (0);
+#endif
+#endif
+
+#if defined (_SEQUENT_)
+    struct utsname un;
+
+    uname(&un);
+
+    if (strncmp(un.version, "V2", 2) == 0) {
+       printf ("i386-sequent-ptx2\n"); exit (0);
+    }
+    if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
+       printf ("i386-sequent-ptx1\n"); exit (0);
+    }
+    printf ("i386-sequent-ptx\n"); exit (0);
+
+#endif
+
+#if defined (vax)
+# if !defined (ultrix)
+#  include <sys/param.h>
+#  if defined (BSD)
+#   if BSD == 43
+      printf ("vax-dec-bsd4.3\n"); exit (0);
+#   else
+#    if BSD == 199006
+      printf ("vax-dec-bsd4.3reno\n"); exit (0);
+#    else
+      printf ("vax-dec-bsd\n"); exit (0);
+#    endif
+#   endif
+#  else
+    printf ("vax-dec-bsd\n"); exit (0);
+#  endif
+# else
+    printf ("vax-dec-ultrix\n"); exit (0);
+# endif
+#endif
+
+#if defined (alliant) && defined (i860)
+  printf ("i860-alliant-bsd\n"); exit (0);
+#endif
+
+  exit (1);
+}
+EOF
+
+$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
+       { echo "$SYSTEM_NAME"; exit; }
+
+# Apollos put the system type in the environment.
+
+test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
+
+# Convex versions that predate uname can use getsysinfo(1)
+
+if [ -x /usr/convex/getsysinfo ]
+then
+    case `getsysinfo -f cpu_type` in
+    c1*)
+       echo c1-convex-bsd
+       exit ;;
+    c2*)
+       if getsysinfo -f scalar_acc
+       then echo c32-convex-bsd
+       else echo c2-convex-bsd
+       fi
+       exit ;;
+    c34*)
+       echo c34-convex-bsd
+       exit ;;
+    c38*)
+       echo c38-convex-bsd
+       exit ;;
+    c4*)
+       echo c4-convex-bsd
+       exit ;;
+    esac
+fi
+
+cat >&2 <<EOF
+$0: unable to guess system type
+
+This script, last modified $timestamp, has failed to recognize
+the operating system you are using. It is advised that you
+download the most up to date version of the config scripts from
+
+  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+and
+  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
+
+If the version you run ($0) is already up to date, please
+send the following data and any information you think might be
+pertinent to <config-patches@gnu.org> in order to provide the needed
+information to handle your system.
+
+config.guess timestamp = $timestamp
+
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
+/bin/uname -X     = `(/bin/uname -X) 2>/dev/null`
+
+hostinfo               = `(hostinfo) 2>/dev/null`
+/bin/universe          = `(/bin/universe) 2>/dev/null`
+/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null`
+/bin/arch              = `(/bin/arch) 2>/dev/null`
+/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
+
+UNAME_MACHINE = ${UNAME_MACHINE}
+UNAME_RELEASE = ${UNAME_RELEASE}
+UNAME_SYSTEM  = ${UNAME_SYSTEM}
+UNAME_VERSION = ${UNAME_VERSION}
+EOF
+
+exit 1
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
diff --git a/config/config.sub b/config/config.sub
new file mode 100644 (file)
index 0000000..2a55a50
--- /dev/null
@@ -0,0 +1,1705 @@
+#! /bin/sh
+# Configuration validation subroutine script.
+#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
+#   Free Software Foundation, Inc.
+
+timestamp='2009-11-20'
+
+# This file is (in principle) common to ALL GNU software.
+# The presence of a machine in this file suggests that SOME GNU software
+# can handle that machine.  It does not imply ALL GNU software can.
+#
+# This file is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
+# 02110-1301, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+
+# Please send patches to <config-patches@gnu.org>.  Submit a context
+# diff and a properly formatted GNU ChangeLog entry.
+#
+# Configuration subroutine to validate and canonicalize a configuration type.
+# Supply the specified configuration type as an argument.
+# If it is invalid, we print an error message on stderr and exit with code 1.
+# Otherwise, we print the canonical config type on stdout and succeed.
+
+# You can get the latest version of this script from:
+# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
+
+# This file is supposed to be the same for all GNU packages
+# and recognize all the CPU types, system types and aliases
+# that are meaningful with *any* GNU software.
+# Each package is responsible for reporting which valid configurations
+# it does not support.  The user should be able to distinguish
+# a failure to support a valid configuration from a meaningless
+# configuration.
+
+# The goal of this file is to map all the various variations of a given
+# machine specification into a single specification in the form:
+#      CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or in some cases, the newer four-part form:
+#      CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+# It is wrong to echo any other type of specification.
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION] CPU-MFR-OPSYS
+       $0 [OPTION] ALIAS
+
+Canonicalize a configuration name.
+
+Operation modes:
+  -h, --help         print this help, then exit
+  -t, --time-stamp   print date of last modification, then exit
+  -v, --version      print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.sub ($timestamp)
+
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
+2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions.  There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+  case $1 in
+    --time-stamp | --time* | -t )
+       echo "$timestamp" ; exit ;;
+    --version | -v )
+       echo "$version" ; exit ;;
+    --help | --h* | -h )
+       echo "$usage"; exit ;;
+    -- )     # Stop option processing
+       shift; break ;;
+    - )        # Use stdin as input.
+       break ;;
+    -* )
+       echo "$me: invalid option $1$help"
+       exit 1 ;;
+
+    *local*)
+       # First pass through any local machine types.
+       echo $1
+       exit ;;
+
+    * )
+       break ;;
+  esac
+done
+
+case $# in
+ 0) echo "$me: missing argument$help" >&2
+    exit 1;;
+ 1) ;;
+ *) echo "$me: too many arguments$help" >&2
+    exit 1;;
+esac
+
+# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
+# Here we must recognize all the valid KERNEL-OS combinations.
+maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
+case $maybe_os in
+  nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \
+  uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \
+  kopensolaris*-gnu* | \
+  storm-chaos* | os2-emx* | rtmk-nova*)
+    os=-$maybe_os
+    basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
+    ;;
+  *)
+    basic_machine=`echo $1 | sed 's/-[^-]*$//'`
+    if [ $basic_machine != $1 ]
+    then os=`echo $1 | sed 's/.*-/-/'`
+    else os=; fi
+    ;;
+esac
+
+### Let's recognize common machines as not being operating systems so
+### that things like config.sub decstation-3100 work.  We also
+### recognize some manufacturers as not being operating systems, so we
+### can provide default operating systems below.
+case $os in
+       -sun*os*)
+               # Prevent following clause from handling this invalid input.
+               ;;
+       -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
+       -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
+       -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
+       -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
+       -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
+       -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
+       -apple | -axis | -knuth | -cray | -microblaze)
+               os=
+               basic_machine=$1
+               ;;
+        -bluegene*)
+               os=-cnk
+               ;;
+       -sim | -cisco | -oki | -wec | -winbond)
+               os=
+               basic_machine=$1
+               ;;
+       -scout)
+               ;;
+       -wrs)
+               os=-vxworks
+               basic_machine=$1
+               ;;
+       -chorusos*)
+               os=-chorusos
+               basic_machine=$1
+               ;;
+       -chorusrdb)
+               os=-chorusrdb
+               basic_machine=$1
+               ;;
+       -hiux*)
+               os=-hiuxwe2
+               ;;
+       -sco6)
+               os=-sco5v6
+               basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+               ;;
+       -sco5)
+               os=-sco3.2v5
+               basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+               ;;
+       -sco4)
+               os=-sco3.2v4
+               basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+               ;;
+       -sco3.2.[4-9]*)
+               os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
+               basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+               ;;
+       -sco3.2v[4-9]*)
+               # Don't forget version if it is 3.2v4 or newer.
+               basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+               ;;
+       -sco5v6*)
+               # Don't forget version if it is 3.2v4 or newer.
+               basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+               ;;
+       -sco*)
+               os=-sco3.2v2
+               basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+               ;;
+       -udk*)
+               basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+               ;;
+       -isc)
+               os=-isc2.2
+               basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+               ;;
+       -clix*)
+               basic_machine=clipper-intergraph
+               ;;
+       -isc*)
+               basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+               ;;
+       -lynx*)
+               os=-lynxos
+               ;;
+       -ptx*)
+               basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
+               ;;
+       -windowsnt*)
+               os=`echo $os | sed -e 's/windowsnt/winnt/'`
+               ;;
+       -psos*)
+               os=-psos
+               ;;
+       -mint | -mint[0-9]*)
+               basic_machine=m68k-atari
+               os=-mint
+               ;;
+esac
+
+# Decode aliases for certain CPU-COMPANY combinations.
+case $basic_machine in
+       # Recognize the basic CPU types without company name.
+       # Some are omitted here because they have special meanings below.
+       1750a | 580 \
+       | a29k \
+       | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
+       | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
+       | am33_2.0 \
+       | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \
+       | bfin \
+       | c4x | clipper \
+       | d10v | d30v | dlx | dsp16xx \
+       | fido | fr30 | frv \
+       | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
+       | i370 | i860 | i960 | ia64 \
+       | ip2k | iq2000 \
+       | lm32 \
+       | m32c | m32r | m32rle | m68000 | m68k | m88k \
+       | maxq | mb | microblaze | mcore | mep | metag \
+       | mips | mipsbe | mipseb | mipsel | mipsle \
+       | mips16 \
+       | mips64 | mips64el \
+       | mips64octeon | mips64octeonel \
+       | mips64orion | mips64orionel \
+       | mips64r5900 | mips64r5900el \
+       | mips64vr | mips64vrel \
+       | mips64vr4100 | mips64vr4100el \
+       | mips64vr4300 | mips64vr4300el \
+       | mips64vr5000 | mips64vr5000el \
+       | mips64vr5900 | mips64vr5900el \
+       | mipsisa32 | mipsisa32el \
+       | mipsisa32r2 | mipsisa32r2el \
+       | mipsisa64 | mipsisa64el \
+       | mipsisa64r2 | mipsisa64r2el \
+       | mipsisa64sb1 | mipsisa64sb1el \
+       | mipsisa64sr71k | mipsisa64sr71kel \
+       | mipstx39 | mipstx39el \
+       | mn10200 | mn10300 \
+       | moxie \
+       | mt \
+       | msp430 \
+       | nios | nios2 \
+       | ns16k | ns32k \
+       | or32 \
+       | pdp10 | pdp11 | pj | pjl \
+       | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
+       | pyramid \
+       | rx \
+       | score \
+       | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
+       | sh64 | sh64le \
+       | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
+       | sparcv8 | sparcv9 | sparcv9b | sparcv9v \
+       | spu | strongarm \
+       | tahoe | thumb | tic4x | tic80 | tron \
+       | ubicom32 \
+       | v850 | v850e \
+       | we32k \
+       | x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \
+       | z8k | z80)
+               basic_machine=$basic_machine-unknown
+               ;;
+       m6811 | m68hc11 | m6812 | m68hc12 | picochip)
+               # Motorola 68HC11/12.
+               basic_machine=$basic_machine-unknown
+               os=-none
+               ;;
+       m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
+               ;;
+       ms1)
+               basic_machine=mt-unknown
+               ;;
+
+       # We use `pc' rather than `unknown'
+       # because (1) that's what they normally are, and
+       # (2) the word "unknown" tends to confuse beginning users.
+       i*86 | x86_64)
+         basic_machine=$basic_machine-pc
+         ;;
+       # Object if more than one company name word.
+       *-*-*)
+               echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+               exit 1
+               ;;
+       # Recognize the basic CPU types with company name.
+       580-* \
+       | a29k-* \
+       | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
+       | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
+       | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
+       | arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
+       | avr-* | avr32-* \
+       | bfin-* | bs2000-* \
+       | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
+       | clipper-* | craynv-* | cydra-* \
+       | d10v-* | d30v-* | dlx-* \
+       | elxsi-* \
+       | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
+       | h8300-* | h8500-* \
+       | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
+       | i*86-* | i860-* | i960-* | ia64-* \
+       | ip2k-* | iq2000-* \
+       | lm32-* \
+       | m32c-* | m32r-* | m32rle-* \
+       | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
+       | m88110-* | m88k-* | maxq-* | mcore-* | metag-* | microblaze-* \
+       | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
+       | mips16-* \
+       | mips64-* | mips64el-* \
+       | mips64octeon-* | mips64octeonel-* \
+       | mips64orion-* | mips64orionel-* \
+       | mips64r5900-* | mips64r5900el-* \
+       | mips64vr-* | mips64vrel-* \
+       | mips64vr4100-* | mips64vr4100el-* \
+       | mips64vr4300-* | mips64vr4300el-* \
+       | mips64vr5000-* | mips64vr5000el-* \
+       | mips64vr5900-* | mips64vr5900el-* \
+       | mipsisa32-* | mipsisa32el-* \
+       | mipsisa32r2-* | mipsisa32r2el-* \
+       | mipsisa64-* | mipsisa64el-* \
+       | mipsisa64r2-* | mipsisa64r2el-* \
+       | mipsisa64sb1-* | mipsisa64sb1el-* \
+       | mipsisa64sr71k-* | mipsisa64sr71kel-* \
+       | mipstx39-* | mipstx39el-* \
+       | mmix-* \
+       | mt-* \
+       | msp430-* \
+       | nios-* | nios2-* \
+       | none-* | np1-* | ns16k-* | ns32k-* \
+       | orion-* \
+       | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
+       | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
+       | pyramid-* \
+       | romp-* | rs6000-* | rx-* \
+       | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
+       | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
+       | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
+       | sparclite-* \
+       | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \
+       | tahoe-* | thumb-* \
+       | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* | tile-* \
+       | tron-* \
+       | ubicom32-* \
+       | v850-* | v850e-* | vax-* \
+       | we32k-* \
+       | x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \
+       | xstormy16-* | xtensa*-* \
+       | ymp-* \
+       | z8k-* | z80-*)
+               ;;
+       # Recognize the basic CPU types without company name, with glob match.
+       xtensa*)
+               basic_machine=$basic_machine-unknown
+               ;;
+       # Recognize the various machine names and aliases which stand
+       # for a CPU type and a company and sometimes even an OS.
+       386bsd)
+               basic_machine=i386-unknown
+               os=-bsd
+               ;;
+       3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
+               basic_machine=m68000-att
+               ;;
+       3b*)
+               basic_machine=we32k-att
+               ;;
+       a29khif)
+               basic_machine=a29k-amd
+               os=-udi
+               ;;
+       abacus)
+               basic_machine=abacus-unknown
+               ;;
+       adobe68k)
+               basic_machine=m68010-adobe
+               os=-scout
+               ;;
+       alliant | fx80)
+               basic_machine=fx80-alliant
+               ;;
+       altos | altos3068)
+               basic_machine=m68k-altos
+               ;;
+       am29k)
+               basic_machine=a29k-none
+               os=-bsd
+               ;;
+       amd64)
+               basic_machine=x86_64-pc
+               ;;
+       amd64-*)
+               basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
+               ;;
+       amdahl)
+               basic_machine=580-amdahl
+               os=-sysv
+               ;;
+       amiga | amiga-*)
+               basic_machine=m68k-unknown
+               ;;
+       amigaos | amigados)
+               basic_machine=m68k-unknown
+               os=-amigaos
+               ;;
+       amigaunix | amix)
+               basic_machine=m68k-unknown
+               os=-sysv4
+               ;;
+       apollo68)
+               basic_machine=m68k-apollo
+               os=-sysv
+               ;;
+       apollo68bsd)
+               basic_machine=m68k-apollo
+               os=-bsd
+               ;;
+       aros)
+               basic_machine=i386-pc
+               os=-aros
+               ;;
+       aux)
+               basic_machine=m68k-apple
+               os=-aux
+               ;;
+       balance)
+               basic_machine=ns32k-sequent
+               os=-dynix
+               ;;
+       blackfin)
+               basic_machine=bfin-unknown
+               os=-linux
+               ;;
+       blackfin-*)
+               basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
+               os=-linux
+               ;;
+       bluegene*)
+               basic_machine=powerpc-ibm
+               os=-cnk
+               ;;
+       c90)
+               basic_machine=c90-cray
+               os=-unicos
+               ;;
+        cegcc)
+               basic_machine=arm-unknown
+               os=-cegcc
+               ;;
+       convex-c1)
+               basic_machine=c1-convex
+               os=-bsd
+               ;;
+       convex-c2)
+               basic_machine=c2-convex
+               os=-bsd
+               ;;
+       convex-c32)
+               basic_machine=c32-convex
+               os=-bsd
+               ;;
+       convex-c34)
+               basic_machine=c34-convex
+               os=-bsd
+               ;;
+       convex-c38)
+               basic_machine=c38-convex
+               os=-bsd
+               ;;
+       cray | j90)
+               basic_machine=j90-cray
+               os=-unicos
+               ;;
+       craynv)
+               basic_machine=craynv-cray
+               os=-unicosmp
+               ;;
+       cr16)
+               basic_machine=cr16-unknown
+               os=-elf
+               ;;
+       crds | unos)
+               basic_machine=m68k-crds
+               ;;
+       crisv32 | crisv32-* | etraxfs*)
+               basic_machine=crisv32-axis
+               ;;
+       cris | cris-* | etrax*)
+               basic_machine=cris-axis
+               ;;
+       crx)
+               basic_machine=crx-unknown
+               os=-elf
+               ;;
+       da30 | da30-*)
+               basic_machine=m68k-da30
+               ;;
+       decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
+               basic_machine=mips-dec
+               ;;
+       decsystem10* | dec10*)
+               basic_machine=pdp10-dec
+               os=-tops10
+               ;;
+       decsystem20* | dec20*)
+               basic_machine=pdp10-dec
+               os=-tops20
+               ;;
+       delta | 3300 | motorola-3300 | motorola-delta \
+             | 3300-motorola | delta-motorola)
+               basic_machine=m68k-motorola
+               ;;
+       delta88)
+               basic_machine=m88k-motorola
+               os=-sysv3
+               ;;
+       dicos)
+               basic_machine=i686-pc
+               os=-dicos
+               ;;
+       djgpp)
+               basic_machine=i586-pc
+               os=-msdosdjgpp
+               ;;
+       dpx20 | dpx20-*)
+               basic_machine=rs6000-bull
+               os=-bosx
+               ;;
+       dpx2* | dpx2*-bull)
+               basic_machine=m68k-bull
+               os=-sysv3
+               ;;
+       ebmon29k)
+               basic_machine=a29k-amd
+               os=-ebmon
+               ;;
+       elxsi)
+               basic_machine=elxsi-elxsi
+               os=-bsd
+               ;;
+       encore | umax | mmax)
+               basic_machine=ns32k-encore
+               ;;
+       es1800 | OSE68k | ose68k | ose | OSE)
+               basic_machine=m68k-ericsson
+               os=-ose
+               ;;
+       fx2800)
+               basic_machine=i860-alliant
+               ;;
+       genix)
+               basic_machine=ns32k-ns
+               ;;
+       gmicro)
+               basic_machine=tron-gmicro
+               os=-sysv
+               ;;
+       go32)
+               basic_machine=i386-pc
+               os=-go32
+               ;;
+       h3050r* | hiux*)
+               basic_machine=hppa1.1-hitachi
+               os=-hiuxwe2
+               ;;
+       h8300hms)
+               basic_machine=h8300-hitachi
+               os=-hms
+               ;;
+       h8300xray)
+               basic_machine=h8300-hitachi
+               os=-xray
+               ;;
+       h8500hms)
+               basic_machine=h8500-hitachi
+               os=-hms
+               ;;
+       harris)
+               basic_machine=m88k-harris
+               os=-sysv3
+               ;;
+       hp300-*)
+               basic_machine=m68k-hp
+               ;;
+       hp300bsd)
+               basic_machine=m68k-hp
+               os=-bsd
+               ;;
+       hp300hpux)
+               basic_machine=m68k-hp
+               os=-hpux
+               ;;
+       hp3k9[0-9][0-9] | hp9[0-9][0-9])
+               basic_machine=hppa1.0-hp
+               ;;
+       hp9k2[0-9][0-9] | hp9k31[0-9])
+               basic_machine=m68000-hp
+               ;;
+       hp9k3[2-9][0-9])
+               basic_machine=m68k-hp
+               ;;
+       hp9k6[0-9][0-9] | hp6[0-9][0-9])
+               basic_machine=hppa1.0-hp
+               ;;
+       hp9k7[0-79][0-9] | hp7[0-79][0-9])
+               basic_machine=hppa1.1-hp
+               ;;
+       hp9k78[0-9] | hp78[0-9])
+               # FIXME: really hppa2.0-hp
+               basic_machine=hppa1.1-hp
+               ;;
+       hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
+               # FIXME: really hppa2.0-hp
+               basic_machine=hppa1.1-hp
+               ;;
+       hp9k8[0-9][13679] | hp8[0-9][13679])
+               basic_machine=hppa1.1-hp
+               ;;
+       hp9k8[0-9][0-9] | hp8[0-9][0-9])
+               basic_machine=hppa1.0-hp
+               ;;
+       hppa-next)
+               os=-nextstep3
+               ;;
+       hppaosf)
+               basic_machine=hppa1.1-hp
+               os=-osf
+               ;;
+       hppro)
+               basic_machine=hppa1.1-hp
+               os=-proelf
+               ;;
+       i370-ibm* | ibm*)
+               basic_machine=i370-ibm
+               ;;
+# I'm not sure what "Sysv32" means.  Should this be sysv3.2?
+       i*86v32)
+               basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+               os=-sysv32
+               ;;
+       i*86v4*)
+               basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+               os=-sysv4
+               ;;
+       i*86v)
+               basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+               os=-sysv
+               ;;
+       i*86sol2)
+               basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+               os=-solaris2
+               ;;
+       i386mach)
+               basic_machine=i386-mach
+               os=-mach
+               ;;
+       i386-vsta | vsta)
+               basic_machine=i386-unknown
+               os=-vsta
+               ;;
+       iris | iris4d)
+               basic_machine=mips-sgi
+               case $os in
+                   -irix*)
+                       ;;
+                   *)
+                       os=-irix4
+                       ;;
+               esac
+               ;;
+       isi68 | isi)
+               basic_machine=m68k-isi
+               os=-sysv
+               ;;
+       m68knommu)
+               basic_machine=m68k-unknown
+               os=-linux
+               ;;
+       m68knommu-*)
+               basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'`
+               os=-linux
+               ;;
+       m88k-omron*)
+               basic_machine=m88k-omron
+               ;;
+       magnum | m3230)
+               basic_machine=mips-mips
+               os=-sysv
+               ;;
+       merlin)
+               basic_machine=ns32k-utek
+               os=-sysv
+               ;;
+        microblaze)
+               basic_machine=microblaze-xilinx
+               ;;
+       mingw32)
+               basic_machine=i386-pc
+               os=-mingw32
+               ;;
+       mingw32ce)
+               basic_machine=arm-unknown
+               os=-mingw32ce
+               ;;
+       miniframe)
+               basic_machine=m68000-convergent
+               ;;
+       *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
+               basic_machine=m68k-atari
+               os=-mint
+               ;;
+       mips3*-*)
+               basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
+               ;;
+       mips3*)
+               basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
+               ;;
+       monitor)
+               basic_machine=m68k-rom68k
+               os=-coff
+               ;;
+       morphos)
+               basic_machine=powerpc-unknown
+               os=-morphos
+               ;;
+       msdos)
+               basic_machine=i386-pc
+               os=-msdos
+               ;;
+       ms1-*)
+               basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
+               ;;
+       mvs)
+               basic_machine=i370-ibm
+               os=-mvs
+               ;;
+       ncr3000)
+               basic_machine=i486-ncr
+               os=-sysv4
+               ;;
+       netbsd386)
+               basic_machine=i386-unknown
+               os=-netbsd
+               ;;
+       netwinder)
+               basic_machine=armv4l-rebel
+               os=-linux
+               ;;
+       news | news700 | news800 | news900)
+               basic_machine=m68k-sony
+               os=-newsos
+               ;;
+       news1000)
+               basic_machine=m68030-sony
+               os=-newsos
+               ;;
+       news-3600 | risc-news)
+               basic_machine=mips-sony
+               os=-newsos
+               ;;
+       necv70)
+               basic_machine=v70-nec
+               os=-sysv
+               ;;
+       next | m*-next )
+               basic_machine=m68k-next
+               case $os in
+                   -nextstep* )
+                       ;;
+                   -ns2*)
+                     os=-nextstep2
+                       ;;
+                   *)
+                     os=-nextstep3
+                       ;;
+               esac
+               ;;
+       nh3000)
+               basic_machine=m68k-harris
+               os=-cxux
+               ;;
+       nh[45]000)
+               basic_machine=m88k-harris
+               os=-cxux
+               ;;
+       nindy960)
+               basic_machine=i960-intel
+               os=-nindy
+               ;;
+       mon960)
+               basic_machine=i960-intel
+               os=-mon960
+               ;;
+       nonstopux)
+               basic_machine=mips-compaq
+               os=-nonstopux
+               ;;
+       np1)
+               basic_machine=np1-gould
+               ;;
+       nsr-tandem)
+               basic_machine=nsr-tandem
+               ;;
+       op50n-* | op60c-*)
+               basic_machine=hppa1.1-oki
+               os=-proelf
+               ;;
+       openrisc | openrisc-*)
+               basic_machine=or32-unknown
+               ;;
+       os400)
+               basic_machine=powerpc-ibm
+               os=-os400
+               ;;
+       OSE68000 | ose68000)
+               basic_machine=m68000-ericsson
+               os=-ose
+               ;;
+       os68k)
+               basic_machine=m68k-none
+               os=-os68k
+               ;;
+       pa-hitachi)
+               basic_machine=hppa1.1-hitachi
+               os=-hiuxwe2
+               ;;
+       paragon)
+               basic_machine=i860-intel
+               os=-osf
+               ;;
+       parisc)
+               basic_machine=hppa-unknown
+               os=-linux
+               ;;
+       parisc-*)
+               basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'`
+               os=-linux
+               ;;
+       pbd)
+               basic_machine=sparc-tti
+               ;;
+       pbb)
+               basic_machine=m68k-tti
+               ;;
+       pc532 | pc532-*)
+               basic_machine=ns32k-pc532
+               ;;
+       pc98)
+               basic_machine=i386-pc
+               ;;
+       pc98-*)
+               basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
+               ;;
+       pentium | p5 | k5 | k6 | nexgen | viac3)
+               basic_machine=i586-pc
+               ;;
+       pentiumpro | p6 | 6x86 | athlon | athlon_*)
+               basic_machine=i686-pc
+               ;;
+       pentiumii | pentium2 | pentiumiii | pentium3)
+               basic_machine=i686-pc
+               ;;
+       pentium4)
+               basic_machine=i786-pc
+               ;;
+       pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
+               basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
+               ;;
+       pentiumpro-* | p6-* | 6x86-* | athlon-*)
+               basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+               ;;
+       pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
+               basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+               ;;
+       pentium4-*)
+               basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
+               ;;
+       pn)
+               basic_machine=pn-gould
+               ;;
+       power)  basic_machine=power-ibm
+               ;;
+       ppc)    basic_machine=powerpc-unknown
+               ;;
+       ppc-*)  basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
+               ;;
+       ppcle | powerpclittle | ppc-le | powerpc-little)
+               basic_machine=powerpcle-unknown
+               ;;
+       ppcle-* | powerpclittle-*)
+               basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
+               ;;
+       ppc64)  basic_machine=powerpc64-unknown
+               ;;
+       ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
+               ;;
+       ppc64le | powerpc64little | ppc64-le | powerpc64-little)
+               basic_machine=powerpc64le-unknown
+               ;;
+       ppc64le-* | powerpc64little-*)
+               basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
+               ;;
+       ps2)
+               basic_machine=i386-ibm
+               ;;
+       pw32)
+               basic_machine=i586-unknown
+               os=-pw32
+               ;;
+       rdos)
+               basic_machine=i386-pc
+               os=-rdos
+               ;;
+       rom68k)
+               basic_machine=m68k-rom68k
+               os=-coff
+               ;;
+       rm[46]00)
+               basic_machine=mips-siemens
+               ;;
+       rtpc | rtpc-*)
+               basic_machine=romp-ibm
+               ;;
+       s390 | s390-*)
+               basic_machine=s390-ibm
+               ;;
+       s390x | s390x-*)
+               basic_machine=s390x-ibm
+               ;;
+       sa29200)
+               basic_machine=a29k-amd
+               os=-udi
+               ;;
+       sb1)
+               basic_machine=mipsisa64sb1-unknown
+               ;;
+       sb1el)
+               basic_machine=mipsisa64sb1el-unknown
+               ;;
+       sde)
+               basic_machine=mipsisa32-sde
+               os=-elf
+               ;;
+       sei)
+               basic_machine=mips-sei
+               os=-seiux
+               ;;
+       sequent)
+               basic_machine=i386-sequent
+               ;;
+       sh)
+               basic_machine=sh-hitachi
+               os=-hms
+               ;;
+       sh5el)
+               basic_machine=sh5le-unknown
+               ;;
+       sh64)
+               basic_machine=sh64-unknown
+               ;;
+       sparclite-wrs | simso-wrs)
+               basic_machine=sparclite-wrs
+               os=-vxworks
+               ;;
+       sps7)
+               basic_machine=m68k-bull
+               os=-sysv2
+               ;;
+       spur)
+               basic_machine=spur-unknown
+               ;;
+       st2000)
+               basic_machine=m68k-tandem
+               ;;
+       stratus)
+               basic_machine=i860-stratus
+               os=-sysv4
+               ;;
+       sun2)
+               basic_machine=m68000-sun
+               ;;
+       sun2os3)
+               basic_machine=m68000-sun
+               os=-sunos3
+               ;;
+       sun2os4)
+               basic_machine=m68000-sun
+               os=-sunos4
+               ;;
+       sun3os3)
+               basic_machine=m68k-sun
+               os=-sunos3
+               ;;
+       sun3os4)
+               basic_machine=m68k-sun
+               os=-sunos4
+               ;;
+       sun4os3)
+               basic_machine=sparc-sun
+               os=-sunos3
+               ;;
+       sun4os4)
+               basic_machine=sparc-sun
+               os=-sunos4
+               ;;
+       sun4sol2)
+               basic_machine=sparc-sun
+               os=-solaris2
+               ;;
+       sun3 | sun3-*)
+               basic_machine=m68k-sun
+               ;;
+       sun4)
+               basic_machine=sparc-sun
+               ;;
+       sun386 | sun386i | roadrunner)
+               basic_machine=i386-sun
+               ;;
+       sv1)
+               basic_machine=sv1-cray
+               os=-unicos
+               ;;
+       symmetry)
+               basic_machine=i386-sequent
+               os=-dynix
+               ;;
+       t3e)
+               basic_machine=alphaev5-cray
+               os=-unicos
+               ;;
+       t90)
+               basic_machine=t90-cray
+               os=-unicos
+               ;;
+       tic54x | c54x*)
+               basic_machine=tic54x-unknown
+               os=-coff
+               ;;
+       tic55x | c55x*)
+               basic_machine=tic55x-unknown
+               os=-coff
+               ;;
+       tic6x | c6x*)
+               basic_machine=tic6x-unknown
+               os=-coff
+               ;;
+       tile*)
+               basic_machine=tile-unknown
+               os=-linux-gnu
+               ;;
+       tx39)
+               basic_machine=mipstx39-unknown
+               ;;
+       tx39el)
+               basic_machine=mipstx39el-unknown
+               ;;
+       toad1)
+               basic_machine=pdp10-xkl
+               os=-tops20
+               ;;
+       tower | tower-32)
+               basic_machine=m68k-ncr
+               ;;
+       tpf)
+               basic_machine=s390x-ibm
+               os=-tpf
+               ;;
+       udi29k)
+               basic_machine=a29k-amd
+               os=-udi
+               ;;
+       ultra3)
+               basic_machine=a29k-nyu
+               os=-sym1
+               ;;
+       v810 | necv810)
+               basic_machine=v810-nec
+               os=-none
+               ;;
+       vaxv)
+               basic_machine=vax-dec
+               os=-sysv
+               ;;
+       vms)
+               basic_machine=vax-dec
+               os=-vms
+               ;;
+       vpp*|vx|vx-*)
+               basic_machine=f301-fujitsu
+               ;;
+       vxworks960)
+               basic_machine=i960-wrs
+               os=-vxworks
+               ;;
+       vxworks68)
+               basic_machine=m68k-wrs
+               os=-vxworks
+               ;;
+       vxworks29k)
+               basic_machine=a29k-wrs
+               os=-vxworks
+               ;;
+       w65*)
+               basic_machine=w65-wdc
+               os=-none
+               ;;
+       w89k-*)
+               basic_machine=hppa1.1-winbond
+               os=-proelf
+               ;;
+       xbox)
+               basic_machine=i686-pc
+               os=-mingw32
+               ;;
+       xps | xps100)
+               basic_machine=xps100-honeywell
+               ;;
+       ymp)
+               basic_machine=ymp-cray
+               os=-unicos
+               ;;
+       z8k-*-coff)
+               basic_machine=z8k-unknown
+               os=-sim
+               ;;
+       z80-*-coff)
+               basic_machine=z80-unknown
+               os=-sim
+               ;;
+       none)
+               basic_machine=none-none
+               os=-none
+               ;;
+
+# Here we handle the default manufacturer of certain CPU types.  It is in
+# some cases the only manufacturer, in others, it is the most popular.
+       w89k)
+               basic_machine=hppa1.1-winbond
+               ;;
+       op50n)
+               basic_machine=hppa1.1-oki
+               ;;
+       op60c)
+               basic_machine=hppa1.1-oki
+               ;;
+       romp)
+               basic_machine=romp-ibm
+               ;;
+       mmix)
+               basic_machine=mmix-knuth
+               ;;
+       rs6000)
+               basic_machine=rs6000-ibm
+               ;;
+       vax)
+               basic_machine=vax-dec
+               ;;
+       pdp10)
+               # there are many clones, so DEC is not a safe bet
+               basic_machine=pdp10-unknown
+               ;;
+       pdp11)
+               basic_machine=pdp11-dec
+               ;;
+       we32k)
+               basic_machine=we32k-att
+               ;;
+       sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele)
+               basic_machine=sh-unknown
+               ;;
+       sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
+               basic_machine=sparc-sun
+               ;;
+       cydra)
+               basic_machine=cydra-cydrome
+               ;;
+       orion)
+               basic_machine=orion-highlevel
+               ;;
+       orion105)
+               basic_machine=clipper-highlevel
+               ;;
+       mac | mpw | mac-mpw)
+               basic_machine=m68k-apple
+               ;;
+       pmac | pmac-mpw)
+               basic_machine=powerpc-apple
+               ;;
+       *-unknown)
+               # Make sure to match an already-canonicalized machine name.
+               ;;
+       *)
+               echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+               exit 1
+               ;;
+esac
+
+# Here we canonicalize certain aliases for manufacturers.
+case $basic_machine in
+       *-digital*)
+               basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
+               ;;
+       *-commodore*)
+               basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
+               ;;
+       *)
+               ;;
+esac
+
+# Decode manufacturer-specific aliases for certain operating systems.
+
+if [ x"$os" != x"" ]
+then
+case $os in
+        # First match some system type aliases
+        # that might get confused with valid system types.
+       # -solaris* is a basic system type, with this one exception.
+        -auroraux)
+               os=-auroraux
+               ;;
+       -solaris1 | -solaris1.*)
+               os=`echo $os | sed -e 's|solaris1|sunos4|'`
+               ;;
+       -solaris)
+               os=-solaris2
+               ;;
+       -svr4*)
+               os=-sysv4
+               ;;
+       -unixware*)
+               os=-sysv4.2uw
+               ;;
+       -gnu/linux*)
+               os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
+               ;;
+       # First accept the basic system types.
+       # The portable systems comes first.
+       # Each alternative MUST END IN A *, to match a version number.
+       # -sysv* is not here because it comes later, after sysvr4.
+       -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
+             | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\
+             | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \
+             | -sym* | -kopensolaris* \
+             | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
+             | -aos* | -aros* \
+             | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
+             | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
+             | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
+             | -openbsd* | -solidbsd* \
+             | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
+             | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
+             | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
+             | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
+             | -chorusos* | -chorusrdb* | -cegcc* \
+             | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
+             | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \
+             | -uxpv* | -beos* | -mpeix* | -udk* \
+             | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
+             | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
+             | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
+             | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
+             | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
+             | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
+             | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es*)
+       # Remember, each alternative MUST END IN *, to match a version number.
+               ;;
+       -qnx*)
+               case $basic_machine in
+                   x86-* | i*86-*)
+                       ;;
+                   *)
+                       os=-nto$os
+                       ;;
+               esac
+               ;;
+       -nto-qnx*)
+               ;;
+       -nto*)
+               os=`echo $os | sed -e 's|nto|nto-qnx|'`
+               ;;
+       -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
+             | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \
+             | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
+               ;;
+       -mac*)
+               os=`echo $os | sed -e 's|mac|macos|'`
+               ;;
+       -linux-dietlibc)
+               os=-linux-dietlibc
+               ;;
+       -linux*)
+               os=`echo $os | sed -e 's|linux|linux-gnu|'`
+               ;;
+       -sunos5*)
+               os=`echo $os | sed -e 's|sunos5|solaris2|'`
+               ;;
+       -sunos6*)
+               os=`echo $os | sed -e 's|sunos6|solaris3|'`
+               ;;
+       -opened*)
+               os=-openedition
+               ;;
+        -os400*)
+               os=-os400
+               ;;
+       -wince*)
+               os=-wince
+               ;;
+       -osfrose*)
+               os=-osfrose
+               ;;
+       -osf*)
+               os=-osf
+               ;;
+       -utek*)
+               os=-bsd
+               ;;
+       -dynix*)
+               os=-bsd
+               ;;
+       -acis*)
+               os=-aos
+               ;;
+       -atheos*)
+               os=-atheos
+               ;;
+       -syllable*)
+               os=-syllable
+               ;;
+       -386bsd)
+               os=-bsd
+               ;;
+       -ctix* | -uts*)
+               os=-sysv
+               ;;
+       -nova*)
+               os=-rtmk-nova
+               ;;
+       -ns2 )
+               os=-nextstep2
+               ;;
+       -nsk*)
+               os=-nsk
+               ;;
+       # Preserve the version number of sinix5.
+       -sinix5.*)
+               os=`echo $os | sed -e 's|sinix|sysv|'`
+               ;;
+       -sinix*)
+               os=-sysv4
+               ;;
+        -tpf*)
+               os=-tpf
+               ;;
+       -triton*)
+               os=-sysv3
+               ;;
+       -oss*)
+               os=-sysv3
+               ;;
+       -svr4)
+               os=-sysv4
+               ;;
+       -svr3)
+               os=-sysv3
+               ;;
+       -sysvr4)
+               os=-sysv4
+               ;;
+       # This must come after -sysvr4.
+       -sysv*)
+               ;;
+       -ose*)
+               os=-ose
+               ;;
+       -es1800*)
+               os=-ose
+               ;;
+       -xenix)
+               os=-xenix
+               ;;
+       -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+               os=-mint
+               ;;
+       -aros*)
+               os=-aros
+               ;;
+       -kaos*)
+               os=-kaos
+               ;;
+       -zvmoe)
+               os=-zvmoe
+               ;;
+       -dicos*)
+               os=-dicos
+               ;;
+       -none)
+               ;;
+       *)
+               # Get rid of the `-' at the beginning of $os.
+               os=`echo $os | sed 's/[^-]*-//'`
+               echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
+               exit 1
+               ;;
+esac
+else
+
+# Here we handle the default operating systems that come with various machines.
+# The value should be what the vendor currently ships out the door with their
+# machine or put another way, the most popular os provided with the machine.
+
+# Note that if you're going to try to match "-MANUFACTURER" here (say,
+# "-sun"), then you have to tell the case statement up towards the top
+# that MANUFACTURER isn't an operating system.  Otherwise, code above
+# will signal an error saying that MANUFACTURER isn't an operating
+# system, and we'll never get to this point.
+
+case $basic_machine in
+        score-*)
+               os=-elf
+               ;;
+        spu-*)
+               os=-elf
+               ;;
+       *-acorn)
+               os=-riscix1.2
+               ;;
+       arm*-rebel)
+               os=-linux
+               ;;
+       arm*-semi)
+               os=-aout
+               ;;
+        c4x-* | tic4x-*)
+               os=-coff
+               ;;
+       # This must come before the *-dec entry.
+       pdp10-*)
+               os=-tops20
+               ;;
+       pdp11-*)
+               os=-none
+               ;;
+       *-dec | vax-*)
+               os=-ultrix4.2
+               ;;
+       m68*-apollo)
+               os=-domain
+               ;;
+       i386-sun)
+               os=-sunos4.0.2
+               ;;
+       m68000-sun)
+               os=-sunos3
+               # This also exists in the configure program, but was not the
+               # default.
+               # os=-sunos4
+               ;;
+       m68*-cisco)
+               os=-aout
+               ;;
+        mep-*)
+               os=-elf
+               ;;
+       mips*-cisco)
+               os=-elf
+               ;;
+       mips*-*)
+               os=-elf
+               ;;
+       or32-*)
+               os=-coff
+               ;;
+       *-tti)  # must be before sparc entry or we get the wrong os.
+               os=-sysv3
+               ;;
+       sparc-* | *-sun)
+               os=-sunos4.1.1
+               ;;
+       *-be)
+               os=-beos
+               ;;
+       *-haiku)
+               os=-haiku
+               ;;
+       *-ibm)
+               os=-aix
+               ;;
+       *-knuth)
+               os=-mmixware
+               ;;
+       *-wec)
+               os=-proelf
+               ;;
+       *-winbond)
+               os=-proelf
+               ;;
+       *-oki)
+               os=-proelf
+               ;;
+       *-hp)
+               os=-hpux
+               ;;
+       *-hitachi)
+               os=-hiux
+               ;;
+       i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
+               os=-sysv
+               ;;
+       *-cbm)
+               os=-amigaos
+               ;;
+       *-dg)
+               os=-dgux
+               ;;
+       *-dolphin)
+               os=-sysv3
+               ;;
+       m68k-ccur)
+               os=-rtu
+               ;;
+       m88k-omron*)
+               os=-luna
+               ;;
+       *-next )
+               os=-nextstep
+               ;;
+       *-sequent)
+               os=-ptx
+               ;;
+       *-crds)
+               os=-unos
+               ;;
+       *-ns)
+               os=-genix
+               ;;
+       i370-*)
+               os=-mvs
+               ;;
+       *-next)
+               os=-nextstep3
+               ;;
+       *-gould)
+               os=-sysv
+               ;;
+       *-highlevel)
+               os=-bsd
+               ;;
+       *-encore)
+               os=-bsd
+               ;;
+       *-sgi)
+               os=-irix
+               ;;
+       *-siemens)
+               os=-sysv4
+               ;;
+       *-masscomp)
+               os=-rtu
+               ;;
+       f30[01]-fujitsu | f700-fujitsu)
+               os=-uxpv
+               ;;
+       *-rom68k)
+               os=-coff
+               ;;
+       *-*bug)
+               os=-coff
+               ;;
+       *-apple)
+               os=-macos
+               ;;
+       *-atari*)
+               os=-mint
+               ;;
+       *)
+               os=-none
+               ;;
+esac
+fi
+
+# Here we handle the case where we know the os, and the CPU type, but not the
+# manufacturer.  We pick the logical manufacturer.
+vendor=unknown
+case $basic_machine in
+       *-unknown)
+               case $os in
+                       -riscix*)
+                               vendor=acorn
+                               ;;
+                       -sunos*)
+                               vendor=sun
+                               ;;
+                       -cnk*|-aix*)
+                               vendor=ibm
+                               ;;
+                       -beos*)
+                               vendor=be
+                               ;;
+                       -hpux*)
+                               vendor=hp
+                               ;;
+                       -mpeix*)
+                               vendor=hp
+                               ;;
+                       -hiux*)
+                               vendor=hitachi
+                               ;;
+                       -unos*)
+                               vendor=crds
+                               ;;
+                       -dgux*)
+                               vendor=dg
+                               ;;
+                       -luna*)
+                               vendor=omron
+                               ;;
+                       -genix*)
+                               vendor=ns
+                               ;;
+                       -mvs* | -opened*)
+                               vendor=ibm
+                               ;;
+                       -os400*)
+                               vendor=ibm
+                               ;;
+                       -ptx*)
+                               vendor=sequent
+                               ;;
+                       -tpf*)
+                               vendor=ibm
+                               ;;
+                       -vxsim* | -vxworks* | -windiss*)
+                               vendor=wrs
+                               ;;
+                       -aux*)
+                               vendor=apple
+                               ;;
+                       -hms*)
+                               vendor=hitachi
+                               ;;
+                       -mpw* | -macos*)
+                               vendor=apple
+                               ;;
+                       -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+                               vendor=atari
+                               ;;
+                       -vos*)
+                               vendor=stratus
+                               ;;
+               esac
+               basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
+               ;;
+esac
+
+echo $basic_machine$os
+exit
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
diff --git a/config/install-sh b/config/install-sh
new file mode 100644 (file)
index 0000000..6ce63b9
--- /dev/null
@@ -0,0 +1,294 @@
+#!/bin/sh
+#
+# install - install a program, script, or datafile
+#
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
+#
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.  It can only install one file at a time, a restriction
+# shared with many OS's install programs.
+
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit="${DOITPROG-}"
+
+
+# put in absolute paths if you don't have them in your path; or use env. vars.
+
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+mkdirprog="${MKDIRPROG-mkdir}"
+
+transformbasename=""
+transform_arg=""
+instcmd="$mvprog"
+chmodcmd="$chmodprog 0755"
+chowncmd=""
+chgrpcmd=""
+stripcmd=""
+rmcmd="$rmprog -f"
+mvcmd="$mvprog"
+src=""
+dst=""
+dir_arg=""
+
+while [ x"$1" != x ]; do
+    case $1 in
+       -c) instcmd=$cpprog
+           shift
+           continue;;
+
+       -d) dir_arg=true
+           shift
+           continue;;
+
+       -m) chmodcmd="$chmodprog $2"
+           shift
+           shift
+           continue;;
+
+       -o) chowncmd="$chownprog $2"
+           shift
+           shift
+           continue;;
+
+       -g) chgrpcmd="$chgrpprog $2"
+           shift
+           shift
+           continue;;
+
+       -s) stripcmd=$stripprog
+           shift
+           continue;;
+
+       -t=*) transformarg=`echo $1 | sed 's/-t=//'`
+           shift
+           continue;;
+
+       -b=*) transformbasename=`echo $1 | sed 's/-b=//'`
+           shift
+           continue;;
+
+       *)  if [ x"$src" = x ]
+           then
+               src=$1
+           else
+               # this colon is to work around a 386BSD /bin/sh bug
+               :
+               dst=$1
+           fi
+           shift
+           continue;;
+    esac
+done
+
+if [ x"$src" = x ]
+then
+       echo "$0: no input file specified" >&2
+       exit 1
+else
+       :
+fi
+
+if [ x"$dir_arg" != x ]; then
+       dst=$src
+       src=""
+
+       if [ -d "$dst" ]; then
+               instcmd=:
+               chmodcmd=""
+       else
+               instcmd=$mkdirprog
+       fi
+else
+
+# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
+# might cause directories to be created, which would be especially bad
+# if $src (and thus $dsttmp) contains '*'.
+
+       if [ -f "$src" ] || [ -d "$src" ]
+       then
+               :
+       else
+               echo "$0: $src does not exist" >&2
+               exit 1
+       fi
+
+       if [ x"$dst" = x ]
+       then
+               echo "$0: no destination specified" >&2
+               exit 1
+       else
+               :
+       fi
+
+# If destination is a directory, append the input filename; if your system
+# does not like double slashes in filenames, you may need to add some logic
+
+       if [ -d "$dst" ]
+       then
+               dst=$dst/`basename "$src"`
+       else
+               :
+       fi
+fi
+
+## this sed command emulates the dirname command
+dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
+
+# Make sure that the destination directory exists.
+#  this part is taken from Noah Friedman's mkinstalldirs script
+
+# Skip lots of stat calls in the usual case.
+if [ ! -d "$dstdir" ]; then
+defaultIFS='
+       '
+IFS="${IFS-$defaultIFS}"
+
+oIFS=$IFS
+# Some sh's can't handle IFS=/ for some reason.
+IFS='%'
+set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
+IFS=$oIFS
+
+pathcomp=''
+
+while [ $# -ne 0 ] ; do
+       pathcomp=$pathcomp$1
+       shift
+
+       if [ ! -d "$pathcomp" ] ;
+        then
+               $mkdirprog "$pathcomp"
+       else
+               :
+       fi
+
+       pathcomp=$pathcomp/
+done
+fi
+
+if [ x"$dir_arg" != x ]
+then
+       $doit $instcmd "$dst" &&
+
+       if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dst"; else : ; fi &&
+       if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dst"; else : ; fi &&
+       if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dst"; else : ; fi &&
+       if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dst"; else : ; fi
+else
+
+# If we're going to rename the final executable, determine the name now.
+
+       if [ x"$transformarg" = x ]
+       then
+               dstfile=`basename "$dst"`
+       else
+               dstfile=`basename "$dst" $transformbasename |
+                       sed $transformarg`$transformbasename
+       fi
+
+# don't allow the sed command to completely eliminate the filename
+
+       if [ x"$dstfile" = x ]
+       then
+               dstfile=`basename "$dst"`
+       else
+               :
+       fi
+
+# Make a couple of temp file names in the proper directory.
+
+       dsttmp=$dstdir/_inst.$$_
+       rmtmp=$dstdir/_rm.$$_
+
+# Trap to clean up temp files at exit.
+
+       trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0
+       trap '(exit $?); exit' 1 2 13 15
+
+# Move or copy the file name to the temp name
+
+       $doit $instcmd "$src" "$dsttmp" &&
+
+# and set any options; do chmod last to preserve setuid bits
+
+# If any of these fail, we abort the whole thing.  If we want to
+# ignore errors from any of these, just make sure not to ignore
+# errors from the above "$doit $instcmd $src $dsttmp" command.
+
+       if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dsttmp"; else :;fi &&
+       if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dsttmp"; else :;fi &&
+       if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dsttmp"; else :;fi &&
+       if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dsttmp"; else :;fi &&
+
+# Now remove or move aside any old file at destination location.  We try this
+# two ways since rm can't unlink itself on some systems and the destination
+# file might be busy for other reasons.  In this case, the final cleanup
+# might fail but the new file should still install successfully.
+
+{
+       if [ -f "$dstdir/$dstfile" ]
+       then
+               $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null ||
+               $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null ||
+               {
+                 echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
+                 (exit 1); exit
+               }
+       else
+               :
+       fi
+} &&
+
+# Now rename the file to the real destination.
+
+       $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
+
+fi &&
+
+# The final little trick to "correctly" pass the exit status to the exit trap.
+
+{
+       (exit 0); exit
+}
diff --git a/config/missing b/config/missing
new file mode 100644 (file)
index 0000000..fc54c64
--- /dev/null
@@ -0,0 +1,336 @@
+#! /bin/sh
+# Common stub for a few missing GNU programs while installing.
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003 Free Software Foundation, Inc.
+# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+if test $# -eq 0; then
+  echo 1>&2 "Try \`$0 --help' for more information"
+  exit 1
+fi
+
+run=:
+
+# In the cases where this matters, `missing' is being run in the
+# srcdir already.
+if test -f configure.ac; then
+  configure_ac=configure.ac
+else
+  configure_ac=configure.in
+fi
+
+case "$1" in
+--run)
+  # Try to run requested program, and just exit if it succeeds.
+  run=
+  shift
+  "$@" && exit 0
+  ;;
+esac
+
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
+case "$1" in
+
+  -h|--h|--he|--hel|--help)
+    echo "\
+$0 [OPTION]... PROGRAM [ARGUMENT]...
+
+Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
+error status if there is no known handling for PROGRAM.
+
+Options:
+  -h, --help      display this help and exit
+  -v, --version   output version information and exit
+  --run           try to run the given command, and emulate it if it fails
+
+Supported PROGRAM values:
+  aclocal      touch file \`aclocal.m4'
+  autoconf     touch file \`configure'
+  autoheader   touch file \`config.h.in'
+  automake     touch all \`Makefile.in' files
+  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
+  flex         create \`lex.yy.c', if possible, from existing .c
+  help2man     touch the output file
+  lex          create \`lex.yy.c', if possible, from existing .c
+  makeinfo     touch the output file
+  tar          try tar, gnutar, gtar, then tar without non-portable flags
+  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]"
+    ;;
+
+  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+    echo "missing 0.4 - GNU automake"
+    ;;
+
+  -*)
+    echo 1>&2 "$0: Unknown \`$1' option"
+    echo 1>&2 "Try \`$0 --help' for more information"
+    exit 1
+    ;;
+
+  aclocal*)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    fi
+
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
+         to install the \`Automake' and \`Perl' packages.  Grab them from
+         any GNU archive site."
+    touch aclocal.m4
+    ;;
+
+  autoconf)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    fi
+
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified \`${configure_ac}'.  You might want to install the
+         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
+         archive site."
+    touch configure
+    ;;
+
+  autoheader)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    fi
+
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified \`acconfig.h' or \`${configure_ac}'.  You might want
+         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
+         from any GNU archive site."
+    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
+    test -z "$files" && files="config.h"
+    touch_files=
+    for f in $files; do
+      case "$f" in
+      *:*) touch_files="$touch_files "`echo "$f" |
+                                      sed -e 's/^[^:]*://' -e 's/:.*//'`;;
+      *) touch_files="$touch_files $f.in";;
+      esac
+    done
+    touch $touch_files
+    ;;
+
+  automake*)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    fi
+
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
+         You might want to install the \`Automake' and \`Perl' packages.
+         Grab them from any GNU archive site."
+    find . -type f -name Makefile.am -print |
+          sed 's/\.am$/.in/' |
+          while read f; do touch "$f"; done
+    ;;
+
+  autom4te)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    fi
+
+    echo 1>&2 "\
+WARNING: \`$1' is needed, and you do not seem to have it handy on your
+         system.  You might have modified some files without having the
+         proper tools for further handling them.
+         You can get \`$1' as part of \`Autoconf' from any GNU
+         archive site."
+
+    file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
+    test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
+    if test -f "$file"; then
+       touch $file
+    else
+       test -z "$file" || exec >$file
+       echo "#! /bin/sh"
+       echo "# Created by GNU Automake missing as a replacement of"
+       echo "#  $ $@"
+       echo "exit 0"
+       chmod +x $file
+       exit 1
+    fi
+    ;;
+
+  bison|yacc)
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified a \`.y' file.  You may need the \`Bison' package
+         in order for those modifications to take effect.  You can get
+         \`Bison' from any GNU archive site."
+    rm -f y.tab.c y.tab.h
+    if [ $# -ne 1 ]; then
+        eval LASTARG="\${$#}"
+       case "$LASTARG" in
+       *.y)
+           SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
+           if [ -f "$SRCFILE" ]; then
+                cp "$SRCFILE" y.tab.c
+           fi
+           SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
+           if [ -f "$SRCFILE" ]; then
+                cp "$SRCFILE" y.tab.h
+           fi
+         ;;
+       esac
+    fi
+    if [ ! -f y.tab.h ]; then
+       echo >y.tab.h
+    fi
+    if [ ! -f y.tab.c ]; then
+       echo 'main() { return 0; }' >y.tab.c
+    fi
+    ;;
+
+  lex|flex)
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified a \`.l' file.  You may need the \`Flex' package
+         in order for those modifications to take effect.  You can get
+         \`Flex' from any GNU archive site."
+    rm -f lex.yy.c
+    if [ $# -ne 1 ]; then
+        eval LASTARG="\${$#}"
+       case "$LASTARG" in
+       *.l)
+           SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
+           if [ -f "$SRCFILE" ]; then
+                cp "$SRCFILE" lex.yy.c
+           fi
+         ;;
+       esac
+    fi
+    if [ ! -f lex.yy.c ]; then
+       echo 'main() { return 0; }' >lex.yy.c
+    fi
+    ;;
+
+  help2man)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    fi
+
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+        you modified a dependency of a manual page.  You may need the
+        \`Help2man' package in order for those modifications to take
+        effect.  You can get \`Help2man' from any GNU archive site."
+
+    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+    if test -z "$file"; then
+       file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
+    fi
+    if [ -f "$file" ]; then
+       touch $file
+    else
+       test -z "$file" || exec >$file
+       echo ".ab help2man is required to generate this page"
+       exit 1
+    fi
+    ;;
+
+  makeinfo)
+    if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then
+       # We have makeinfo, but it failed.
+       exit 1
+    fi
+
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified a \`.texi' or \`.texinfo' file, or any other file
+         indirectly affecting the aspect of the manual.  The spurious
+         call might also be the consequence of using a buggy \`make' (AIX,
+         DU, IRIX).  You might want to install the \`Texinfo' package or
+         the \`GNU make' package.  Grab either from any GNU archive site."
+    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+    if test -z "$file"; then
+      file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+      file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
+    fi
+    touch $file
+    ;;
+
+  tar)
+    shift
+    if test -n "$run"; then
+      echo 1>&2 "ERROR: \`tar' requires --run"
+      exit 1
+    fi
+
+    # We have already tried tar in the generic part.
+    # Look for gnutar/gtar before invocation to avoid ugly error
+    # messages.
+    if (gnutar --version > /dev/null 2>&1); then
+       gnutar "$@" && exit 0
+    fi
+    if (gtar --version > /dev/null 2>&1); then
+       gtar "$@" && exit 0
+    fi
+    firstarg="$1"
+    if shift; then
+       case "$firstarg" in
+       *o*)
+           firstarg=`echo "$firstarg" | sed s/o//`
+           tar "$firstarg" "$@" && exit 0
+           ;;
+       esac
+       case "$firstarg" in
+       *h*)
+           firstarg=`echo "$firstarg" | sed s/h//`
+           tar "$firstarg" "$@" && exit 0
+           ;;
+       esac
+    fi
+
+    echo 1>&2 "\
+WARNING: I can't seem to be able to run \`tar' with the given arguments.
+         You may want to install GNU tar or Free paxutils, or check the
+         command line arguments."
+    exit 1
+    ;;
+
+  *)
+    echo 1>&2 "\
+WARNING: \`$1' is needed, and you do not seem to have it handy on your
+         system.  You might have modified some files without having the
+         proper tools for further handling them.  Check the \`README' file,
+         it often tells you about the needed prerequisites for installing
+         this package.  You may also peek at any GNU archive site, in case
+         some other package would contain this missing \`$1' program."
+    exit 1
+    ;;
+esac
+
+exit 0
diff --git a/config/rdma.m4 b/config/rdma.m4
new file mode 100644 (file)
index 0000000..2f9d923
--- /dev/null
@@ -0,0 +1,657 @@
+dnl Checks for the in-box ib_core
+AC_DEFUN([RDMA_CONFIG_COMPAT],
+[
+       AC_MSG_CHECKING([if ib_verbs has ib_dma_map_single])
+       LB_LINUX_TRY_COMPILE([
+               #include <linux/version.h>
+               #include <linux/pci.h>
+               #include <linux/gfp.h>
+               #include <rdma/ib_verbs.h>
+       ],[
+               ib_dma_map_single(NULL, NULL, 0, 0);
+               return 0;
+       ],[
+               AC_MSG_RESULT(yes)
+               AC_DEFINE(HAVE_INBOX_IB_DMA_MAP, 1,
+                         [ib_dma_map_single defined])
+       ],[
+               AC_MSG_RESULT(no)
+       ])
+
+       AC_MSG_CHECKING([if ib_create_cq wants comp_vector])
+       LB_LINUX_TRY_COMPILE([
+               #include <linux/version.h>
+               #include <linux/pci.h>
+               #include <linux/gfp.h>
+               #include <rdma/ib_verbs.h>
+       ],[
+               ib_create_cq(NULL, NULL, NULL, NULL, 0, 0);
+               return 0;
+       ],[
+               AC_MSG_RESULT(yes)
+               AC_DEFINE(HAVE_INBOX_IB_COMP_VECTOR, 1,
+                         [has completion vector])
+       ],[
+               AC_MSG_RESULT(no)
+       ])
+
+       AC_MSG_CHECKING([if rdma_cm has RDMA_CM_EVENT_ADDR_CHANGE])
+       LB_LINUX_TRY_COMPILE([
+               #include <linux/version.h>
+               #include <linux/pci.h>
+               #include <linux/gfp.h>
+               #include <rdma/rdma_cm.h>
+       ],[
+               return (RDMA_CM_EVENT_ADDR_CHANGE == 0);
+       ],[
+               AC_MSG_RESULT(yes)
+               AC_DEFINE(HAVE_INBOX_RDMA_CMEV_ADDRCHANGE, 1,
+                         [has completion vector])
+       ],[
+               AC_MSG_RESULT(no)
+       ])
+
+       AC_MSG_CHECKING([if rdma_cm has RDMA_CM_EVENT_TIMEWAIT_EXIT])
+       LB_LINUX_TRY_COMPILE([
+               #include <linux/version.h>
+               #include <linux/pci.h>
+               #include <linux/gfp.h>
+               #include <rdma/rdma_cm.h>
+       ],[
+               return (RDMA_CM_EVENT_TIMEWAIT_EXIT == 0);
+       ],[
+               AC_MSG_RESULT(yes)
+               AC_DEFINE(HAVE_INBOX_RDMA_CMEV_TIMEWAIT_EXIT, 1,
+                         [has completion vector])
+       ],[
+               AC_MSG_RESULT(no)
+       ])
+
+       AC_MSG_CHECKING([if rdma_cm has rdma_set_reuseaddr])
+       LB_LINUX_TRY_COMPILE([
+               #include <linux/version.h>
+               #include <linux/pci.h>
+               #include <linux/gfp.h>
+               #include <rdma/rdma_cm.h>
+       ],[
+               rdma_set_reuseaddr(NULL, 1);
+               return 0;
+       ],[
+               AC_MSG_RESULT(yes)
+               AC_DEFINE(HAVE_INBOX_RDMA_SET_REUSEADDR, 1,
+                         [rdma_set_reuse defined])
+       ],[
+               AC_MSG_RESULT(no)
+       ])
+
+       AC_MSG_CHECKING([if struct ib_wc has member named ts])
+       LB_LINUX_TRY_COMPILE([
+               #include <linux/version.h>
+               #include <rdma/ib_verbs.h>
+       ],[
+        struct ib_wc wc;
+        wc->ts.timestamp = 0;
+
+               return 0;
+       ],[
+               AC_MSG_RESULT(yes)
+               AC_DEFINE(HAVE_INBOX_IB_WC_TS, 1,
+                         [ib_wc has member named ts])
+       ],[
+               AC_MSG_RESULT(no)
+       ])
+
+       AC_MSG_CHECKING([if struct ib_ah_attr has member named dmac])
+       LB_LINUX_TRY_COMPILE([
+               #include <linux/version.h>
+               #include <rdma/ib_verbs.h>
+       ],[
+        struct ib_ah_attr *ah_attr;
+        memset(ah_attr->dmac, 0, 6);
+
+               return 0;
+       ],[
+               AC_MSG_RESULT(yes)
+               AC_DEFINE(HAVE_INBOX_IB_AH_ATTR_DMAC, 1,
+                         [ah_attr has member named dmac])
+       ],[
+               AC_MSG_RESULT(no)
+       ])
+
+       AC_MSG_CHECKING([if struct ib_ah_attr has member named vlan_id])
+       LB_LINUX_TRY_COMPILE([
+               #include <linux/version.h>
+               #include <rdma/ib_verbs.h>
+       ],[
+        struct ib_ah_attr *ah_attr;
+        ah_attr->vlan_id = 0;
+
+               return 0;
+       ],[
+               AC_MSG_RESULT(yes)
+               AC_DEFINE(HAVE_INBOX_IB_AH_ATTR_VLAN_ID, 1,
+                         [ah_attr has member named vlan_id])
+       ],[
+               AC_MSG_RESULT(no)
+       ])
+])
+
+dnl Examine kernel functionality
+AC_DEFUN([LINUX_CONFIG_COMPAT],
+[
+       AC_MSG_CHECKING([if kernel has ktime_get_ns])
+       LB_LINUX_TRY_COMPILE([
+               #include <linux/ktime.h>
+       ],[
+               unsigned long long ns;
+
+               ns = ktime_get_ns();
+               return 0;
+       ],[
+               AC_MSG_RESULT(yes)
+               AC_DEFINE(HAVE_KTIME_GET_NS, 1,
+                         [ktime_get_ns defined])
+       ],[
+               AC_MSG_RESULT(no)
+       ])
+
+       AC_MSG_CHECKING([if svc_xprt_class has xcl_ident])
+       LB_LINUX_TRY_COMPILE([
+               #include <linux/sunrpc/xprt.h>
+               #include <linux/sunrpc/svc_xprt.h>
+       ],[
+               struct svc_xprt_class svc_rdma_class = {
+                       .xcl_ident = XPRT_TRANSPORT_RDMA,
+               };
+               return 0;
+       ],[
+               AC_MSG_RESULT(yes)
+               AC_DEFINE(HAVE_XCL_IDENT, 1,
+                         [xcl_ident defined])
+       ],[
+               AC_MSG_RESULT(no)
+       ])
+
+       AC_MSG_CHECKING([if struct ifla_vf_info has max_tx_rate])
+       LB_LINUX_TRY_COMPILE([
+               #include <linux/if_link.h>
+       ],[
+               struct ifla_vf_info *ivf;
+
+               ivf->max_tx_rate = 0;
+               ivf->min_tx_rate = 0;
+
+               return 0;
+       ],[
+               AC_MSG_RESULT(yes)
+               AC_DEFINE(HAVE_TX_RATE_LIMIT, 1,
+                         [max_tx_rate is defined])
+       ],[
+               AC_MSG_RESULT(no)
+       ])
+
+       AC_MSG_CHECKING([if struct ethtool_ops has get/set_rxfh])
+       LB_LINUX_TRY_COMPILE([
+               #include <linux/ethtool.h>
+       ],[
+               const struct ethtool_ops en_ethtool_ops = {
+                       .get_rxfh_indir_size = NULL,
+                       .get_rxfh = NULL,
+                       .set_rxfh = NULL,
+               };
+
+               return 0;
+       ],[
+               AC_MSG_RESULT(yes)
+               AC_DEFINE(HAVE_GET_SET_RXFH, 1,
+                         [get/set_rxfh is defined])
+       ],[
+               AC_MSG_RESULT(no)
+       ])
+
+
+       AC_MSG_CHECKING([if struct ethtool_ops has get/set_tunable])
+       LB_LINUX_TRY_COMPILE([
+               #include <linux/ethtool.h>
+       ],[
+               const struct ethtool_ops en_ethtool_ops = {
+                       .get_tunable = NULL,
+                       .set_tunable = NULL,
+               };
+
+               return 0;
+       ],[
+               AC_MSG_RESULT(yes)
+               AC_DEFINE(HAVE_GET_SET_TUNABLE, 1,
+                         [get/set_tunable is defined])
+       ],[
+               AC_MSG_RESULT(no)
+       ])
+       AC_MSG_CHECKING([if struct net_device has dev_port])
+       LB_LINUX_TRY_COMPILE([
+               #include <linux/netdevice.h>
+       ],[
+               struct net_device *dev;
+
+               dev->dev_port = 0;
+
+               return 0;
+       ],[
+               AC_MSG_RESULT(yes)
+               AC_DEFINE(HAVE_NET_DEVICE_DEV_PORT, 1,
+                         [dev_port is defined])
+       ],[
+               AC_MSG_RESULT(no)
+       ])
+
+       AC_MSG_CHECKING([if struct ptp_clock_info has n_pins])
+       LB_LINUX_TRY_COMPILE([
+               #include <linux/ptp_clock_kernel.h>
+       ],[
+               struct ptp_clock_info *info;
+               info->n_pins = 0;
+
+               return 0;
+       ],[
+               AC_MSG_RESULT(yes)
+               AC_DEFINE(HAVE_PTP_CLOCK_INFO_N_PINS, 1,
+                         [n_pins is defined])
+       ],[
+               AC_MSG_RESULT(no)
+       ])
+
+       AC_MSG_CHECKING([if pci.h pci_enable_msi_exact])
+       LB_LINUX_TRY_COMPILE([
+               #include <linux/pci.h>
+       ],[
+               int x = pci_enable_msi_exact(NULL, 0);
+
+               return 0;
+       ],[
+               AC_MSG_RESULT(yes)
+               AC_DEFINE(HAVE_PCI_ENABLE_MSI_EXACT, 1,
+                         [pci_enable_msi_exact is defined])
+       ],[
+               AC_MSG_RESULT(no)
+       ])
+
+       AC_MSG_CHECKING([if pci.h pci_enable_msix_range])
+       LB_LINUX_TRY_COMPILE([
+               #include <linux/pci.h>
+       ],[
+               int x = pci_enable_msix_range(NULL, 0, 0, 0);
+
+               return 0;
+       ],[
+               AC_MSG_RESULT(yes)
+               AC_DEFINE(HAVE_PCI_ENABLE_MSIX_RANGE, 1,
+                         [pci_enable_msix_range is defined])
+       ],[
+               AC_MSG_RESULT(no)
+       ])
+
+       AC_MSG_CHECKING([if struct iscsi_transport has check_protection])
+       LB_LINUX_TRY_COMPILE([
+               #include <scsi/scsi_transport_iscsi.h>
+       ],[
+               static struct iscsi_transport iscsi_iser_transport = {
+                       .check_protection = NULL,
+               };
+
+               return 0;
+       ],[
+               AC_MSG_RESULT(yes)
+               AC_DEFINE(HAVE_ISCSI_CHECK_PROTECTION, 1,
+                         [check_protection is defined])
+       ],[
+               AC_MSG_RESULT(no)
+       ])
+
+       AC_MSG_CHECKING([if netdevice.h has select_queue_fallback_t])
+       LB_LINUX_TRY_COMPILE([
+               #include <linux/netdevice.h>
+       ],[
+               select_queue_fallback_t fallback;
+
+               return 0;
+       ],[
+               AC_MSG_RESULT(yes)
+               AC_DEFINE(HAVE_SELECT_QUEUE_FALLBACK_T, 1,
+                         [select_queue_fallback_t is defined])
+       ],[
+               AC_MSG_RESULT(no)
+       ])
+
+       AC_MSG_CHECKING([if skbuff.h has skb_set_hash])
+       LB_LINUX_TRY_COMPILE([
+               #include <linux/netdevice.h>
+       ],[
+               skb_set_hash(NULL, 0, PKT_HASH_TYPE_L3);
+
+               return 0;
+       ],[
+               AC_MSG_RESULT(yes)
+               AC_DEFINE(HAVE_SKB_SET_HASH, 1,
+                         [skb_set_hash is defined])
+       ],[
+               AC_MSG_RESULT(no)
+       ])
+
+       AC_MSG_CHECKING([if sockios.h has SIOCGHWTSTAMP])
+       LB_LINUX_TRY_COMPILE([
+               #include <linux/sockios.h>
+       ],[
+               int x = SIOCGHWTSTAMP;
+
+               return 0;
+       ],[
+               AC_MSG_RESULT(yes)
+               AC_DEFINE(HAVE_SIOCGHWTSTAMP, 1,
+                         [SIOCGHWTSTAMP is defined])
+       ],[
+               AC_MSG_RESULT(no)
+       ])
+
+       AC_MSG_CHECKING([if ip.h inet_get_local_port_range has 3 parameters])
+       LB_LINUX_TRY_COMPILE([
+               #include <net/ip.h>
+       ],[
+               inet_get_local_port_range(NULL, NULL, NULL);
+
+               return 0;
+       ],[
+               AC_MSG_RESULT(yes)
+               AC_DEFINE(HAVE_INET_GET_LOCAL_PORT_RANGE_3_PARAMS, 1,
+                         [inet_get_local_port_range has 3 parameters])
+       ],[
+               AC_MSG_RESULT(no)
+       ])
+
+       AC_MSG_CHECKING([if net.h has net_get_random_once])
+       LB_LINUX_TRY_COMPILE([
+               #include <linux/net.h>
+       ],[
+               net_get_random_once(NULL, 0);
+
+               return 0;
+       ],[
+               AC_MSG_RESULT(yes)
+               AC_DEFINE(HAVE_NET_GET_RANDOM_ONCE, 1,
+                         [net_get_random_once is defined])
+       ],[
+               AC_MSG_RESULT(no)
+       ])
+
+       AC_MSG_CHECKING([if inet_sock.h has __inet_ehashfn])
+       LB_LINUX_TRY_COMPILE([
+               #include <net/inet_sock.h>
+       ],[
+               __inet_ehashfn(0, 0, 0, 0, 0);
+
+               return 0;
+       ],[
+               AC_MSG_RESULT(yes)
+               AC_DEFINE(HAVE_INET_EHASHFN, 1,
+                         [__inet_ehashfn is defined])
+       ],[
+               AC_MSG_RESULT(no)
+       ])
+
+       AC_MSG_CHECKING([if err.h has PTR_ERR_OR_ZERO])
+       LB_LINUX_TRY_COMPILE([
+               #include <linux/err.h>
+       ],[
+               int x = PTR_ERR_OR_ZERO(NULL);
+
+               return 0;
+       ],[
+               AC_MSG_RESULT(yes)
+               AC_DEFINE(HAVE_PTR_ERR_OR_ZERO, 1,
+                         [PTR_ERR_OR_ZERO is defined])
+       ],[
+               AC_MSG_RESULT(no)
+       ])
+
+       AC_MSG_CHECKING([if struct iscsi_session has discovery_sess])
+       LB_LINUX_TRY_COMPILE([
+               #include <scsi/libiscsi.h>
+       ],[
+               struct iscsi_session session;
+               session.discovery_sess = 0;
+
+               return 0;
+       ],[
+               AC_MSG_RESULT(yes)
+               AC_DEFINE(HAVE_ISCSI_DISCOVERY_SESS, 1,
+                         [discovery_sess is defined])
+       ],[
+               AC_MSG_RESULT(no)
+       ])
+
+       AC_MSG_CHECKING([if enum iscsi_param has ISCSI_PARAM_DISCOVERY_SESS])
+       LB_LINUX_TRY_COMPILE([
+               #include <scsi/iscsi_if.h>
+       ],[
+               int x = ISCSI_PARAM_DISCOVERY_SESS;
+
+               return 0;
+       ],[
+               AC_MSG_RESULT(yes)
+               AC_DEFINE(HAVE_ISCSI_PARAM_DISCOVERY_SESS, 1,
+                         [ISCSI_PARAM_DISCOVERY_SESS is defined])
+       ],[
+               AC_MSG_RESULT(no)
+       ])
+
+       AC_MSG_CHECKING([if pci.h has enum pcie_link_width])
+       LB_LINUX_TRY_COMPILE([
+               #include <scsi/iscsi_if.h>
+       ],[
+               enum pcie_link_width *x;
+
+               return 0;
+       ],[
+               AC_MSG_RESULT(yes)
+               AC_DEFINE(HAVE_PCIE_LINK_WIDTH, 1,
+                         [pcie_link_width is defined])
+       ],[
+               AC_MSG_RESULT(no)
+       ])
+
+       AC_MSG_CHECKING([if netdevice.h has struct netdev_phys_port_id])
+       LB_LINUX_TRY_COMPILE([
+               #include <linux/netdevice.h>
+       ],[
+               struct netdev_phys_port_id x;
+
+               return 0;
+       ],[
+               AC_MSG_RESULT(yes)
+               AC_DEFINE(HAVE_NETDEV_PHYS_PORT_ID, 1,
+                         [netdev_phys_port_id is defined])
+       ],[
+               AC_MSG_RESULT(no)
+       ])
+
+       AC_MSG_CHECKING([if struct ifla_vf_info has linkstate])
+       LB_LINUX_TRY_COMPILE([
+               #include <linux/if_link.h>
+       ],[
+               struct struct ifla_vf_info x;
+               x->linkstate = 0;
+
+               return 0;
+       ],[
+               AC_MSG_RESULT(yes)
+               AC_DEFINE(HAVE_LINKSTATE, 1,
+                         [linkstate is defined])
+       ],[
+               AC_MSG_RESULT(no)
+       ])
+
+       AC_MSG_CHECKING([if busy_poll.h has skb_mark_napi_id])
+       LB_LINUX_TRY_COMPILE([
+               #include <net/busy_poll.h>
+       ],[
+               skb_mark_napi_id(NULL, NULL);
+
+               return 0;
+       ],[
+               AC_MSG_RESULT(yes)
+               AC_DEFINE(HAVE_SKB_MARK_NAPI_ID, 1,
+                         [skb_mark_napi_id is defined])
+       ],[
+               AC_MSG_RESULT(no)
+       ])
+
+       AC_MSG_CHECKING([if netdevice.h has napi_hash_add])
+       LB_LINUX_TRY_COMPILE([
+               #include <linux/netdevice.h>
+       ],[
+               napi_hash_add(NULL);
+
+               return 0;
+       ],[
+               AC_MSG_RESULT(yes)
+               AC_DEFINE(HAVE_NAPI_HASH_ADD, 1,
+                         [napi_hash_add is defined])
+       ],[
+               AC_MSG_RESULT(no)
+       ])
+
+       AC_MSG_CHECKING([if netdevice.h has netif_keep_dst])
+       LB_LINUX_TRY_COMPILE([
+               #include <linux/netdevice.h>
+       ],[
+               netif_keep_dst(NULL);
+
+               return 0;
+       ],[
+               AC_MSG_RESULT(yes)
+               AC_DEFINE(HAVE_NETIF_KEEP_DST, 1,
+                         [netif_keep_dst is defined])
+       ],[
+               AC_MSG_RESULT(no)
+       ])
+
+       AC_MSG_CHECKING([if mm.h has kvfree])
+       LB_LINUX_TRY_COMPILE([
+               #include <linux/mm.h>
+       ],[
+               kvfree(NULL);
+
+               return 0;
+       ],[
+               AC_MSG_RESULT(yes)
+               AC_DEFINE(HAVE_KVFREE, 1,
+                         [kvfree is defined])
+       ],[
+               AC_MSG_RESULT(no)
+       ])
+
+       AC_MSG_CHECKING([if netdevice.h has dev_consume_skb_any])
+       LB_LINUX_TRY_COMPILE([
+               #include <linux/netdevice.h>
+       ],[
+               dev_consume_skb_any(NULL);
+
+               return 0;
+       ],[
+               AC_MSG_RESULT(yes)
+               AC_DEFINE(HAVE_DEV_CONSUME_SKB_ANY, 1,
+                         [dev_consume_skb_any is defined])
+       ],[
+               AC_MSG_RESULT(no)
+       ])
+
+       AC_MSG_CHECKING([if netdevice.h has netdev_txq_bql_complete_prefetchw])
+       LB_LINUX_TRY_COMPILE([
+               #include <linux/netdevice.h>
+       ],[
+               netdev_txq_bql_complete_prefetchw(NULL);
+               netdev_txq_bql_enqueue_prefetchw(NULL);
+
+               return 0;
+       ],[
+               AC_MSG_RESULT(yes)
+               AC_DEFINE(HAVE_NETDEV_TXQ_BQL_PREFETCHW, 1,
+                         [netdev_txq_bql_complete_prefetchw is defined])
+       ],[
+               AC_MSG_RESULT(no)
+       ])
+
+       AC_MSG_CHECKING([if struct sk_buff has xmit_more])
+       LB_LINUX_TRY_COMPILE([
+               #include <linux/skbuff.h>
+       ],[
+               struct sk_buff *skb;
+               skb->xmit_more = 0;
+
+               return 0;
+       ],[
+               AC_MSG_RESULT(yes)
+               AC_DEFINE(HAVE_SK_BUFF_XMIT_MORE, 1,
+                         [xmit_more is defined])
+       ],[
+               AC_MSG_RESULT(no)
+       ])
+
+       AC_MSG_CHECKING([if etherdevice.h has eth_get_headlen])
+       LB_LINUX_TRY_COMPILE([
+               #include <linux/etherdevice.h>
+       ],[
+               eth_get_headlen(NULL, 0);
+
+               return 0;
+       ],[
+               AC_MSG_RESULT(yes)
+               AC_DEFINE(HAVE_ETH_GET_HEADLEN, 1,
+                         [eth_get_headlen is defined])
+       ],[
+               AC_MSG_RESULT(no)
+       ])
+
+       AC_MSG_CHECKING([if struct sk_buff has csum_level])
+       LB_LINUX_TRY_COMPILE([
+               #include <linux/skbuff.h>
+       ],[
+               struct sk_buff *skb;
+               skb->csum_level = 0;
+
+               return 0;
+       ],[
+               AC_MSG_RESULT(yes)
+               AC_DEFINE(HAVE_SK_BUFF_CSUM_LEVEL, 1,
+                         [csum_level is defined])
+       ],[
+               AC_MSG_RESULT(no)
+       ])
+])
+#
+# COMPAT_CONFIG_HEADERS
+#
+# add -include config.h
+#
+AC_DEFUN([COMPAT_CONFIG_HEADERS],[
+       AC_CONFIG_HEADERS([config.h])
+       EXTRA_KCFLAGS="-include $PWD/config.h $EXTRA_KCFLAGS"
+       AC_SUBST(EXTRA_KCFLAGS)
+])
+
+AC_DEFUN([OFA_PROG_LINUX],
+[
+
+LB_LINUX_PATH
+LB_LINUX_SYMVERFILE
+LB_LINUX_CONFIG([MODULES],[],[
+    AC_MSG_ERROR([module support is required to build mlnx kernel modules.])
+])
+LB_LINUX_CONFIG([MODVERSIONS])
+LB_LINUX_CONFIG([KALLSYMS],[],[
+    AC_MSG_ERROR([compat_mlnx requires that CONFIG_KALLSYMS is enabled in your kernel.])
+])
+
+LINUX_CONFIG_COMPAT
+COMPAT_CONFIG_HEADERS
+
+])
diff --git a/configure.ac b/configure.ac
new file mode 100644 (file)
index 0000000..33e57c5
--- /dev/null
@@ -0,0 +1,18 @@
+AC_PREREQ([2.57])
+AC_INIT([compat_ofa], 1.0, [http://bugs.openfabrics.org/bugzilla], [compat_ofa])
+
+AC_CONFIG_AUX_DIR([config])
+AC_CONFIG_MACRO_DIR([config])
+
+AC_CANONICAL_SYSTEM
+
+AC_PROG_CC
+
+AM_PROG_AS
+
+AC_CHECK_TOOLS(AR, ar)
+
+SET_BUILD_ARCH
+LB_PROG_CC
+OFA_PROG_LINUX
+LB_CONDITIONALS