]> git.openfabrics.org - ~shefty/rdma-dev.git/blob - arch/arm/boot/dts/at91sam9260.dtsi
ASoC: atmel-ssc: change disable to disable in dts node
[~shefty/rdma-dev.git] / arch / arm / boot / dts / at91sam9260.dtsi
1 /*
2  * at91sam9260.dtsi - Device Tree Include file for AT91SAM9260 family SoC
3  *
4  *  Copyright (C) 2011 Atmel,
5  *                2011 Nicolas Ferre <nicolas.ferre@atmel.com>,
6  *                2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7  *
8  * Licensed under GPLv2 or later.
9  */
10
11 /include/ "skeleton.dtsi"
12
13 / {
14         model = "Atmel AT91SAM9260 family SoC";
15         compatible = "atmel,at91sam9260";
16         interrupt-parent = <&aic>;
17
18         aliases {
19                 serial0 = &dbgu;
20                 serial1 = &usart0;
21                 serial2 = &usart1;
22                 serial3 = &usart2;
23                 serial4 = &usart3;
24                 serial5 = &usart4;
25                 serial6 = &usart5;
26                 gpio0 = &pioA;
27                 gpio1 = &pioB;
28                 gpio2 = &pioC;
29                 tcb0 = &tcb0;
30                 tcb1 = &tcb1;
31                 i2c0 = &i2c0;
32                 ssc0 = &ssc0;
33         };
34         cpus {
35                 cpu@0 {
36                         compatible = "arm,arm926ejs";
37                 };
38         };
39
40         memory {
41                 reg = <0x20000000 0x04000000>;
42         };
43
44         ahb {
45                 compatible = "simple-bus";
46                 #address-cells = <1>;
47                 #size-cells = <1>;
48                 ranges;
49
50                 apb {
51                         compatible = "simple-bus";
52                         #address-cells = <1>;
53                         #size-cells = <1>;
54                         ranges;
55
56                         aic: interrupt-controller@fffff000 {
57                                 #interrupt-cells = <3>;
58                                 compatible = "atmel,at91rm9200-aic";
59                                 interrupt-controller;
60                                 reg = <0xfffff000 0x200>;
61                                 atmel,external-irqs = <29 30 31>;
62                         };
63
64                         ramc0: ramc@ffffea00 {
65                                 compatible = "atmel,at91sam9260-sdramc";
66                                 reg = <0xffffea00 0x200>;
67                         };
68
69                         pmc: pmc@fffffc00 {
70                                 compatible = "atmel,at91rm9200-pmc";
71                                 reg = <0xfffffc00 0x100>;
72                         };
73
74                         rstc@fffffd00 {
75                                 compatible = "atmel,at91sam9260-rstc";
76                                 reg = <0xfffffd00 0x10>;
77                         };
78
79                         shdwc@fffffd10 {
80                                 compatible = "atmel,at91sam9260-shdwc";
81                                 reg = <0xfffffd10 0x10>;
82                         };
83
84                         pit: timer@fffffd30 {
85                                 compatible = "atmel,at91sam9260-pit";
86                                 reg = <0xfffffd30 0xf>;
87                                 interrupts = <1 4 7>;
88                         };
89
90                         tcb0: timer@fffa0000 {
91                                 compatible = "atmel,at91rm9200-tcb";
92                                 reg = <0xfffa0000 0x100>;
93                                 interrupts = <17 4 0 18 4 0 19 4 0>;
94                         };
95
96                         tcb1: timer@fffdc000 {
97                                 compatible = "atmel,at91rm9200-tcb";
98                                 reg = <0xfffdc000 0x100>;
99                                 interrupts = <26 4 0 27 4 0 28 4 0>;
100                         };
101
102                         pioA: gpio@fffff400 {
103                                 compatible = "atmel,at91rm9200-gpio";
104                                 reg = <0xfffff400 0x100>;
105                                 interrupts = <2 4 1>;
106                                 #gpio-cells = <2>;
107                                 gpio-controller;
108                                 interrupt-controller;
109                                 #interrupt-cells = <2>;
110                         };
111
112                         pioB: gpio@fffff600 {
113                                 compatible = "atmel,at91rm9200-gpio";
114                                 reg = <0xfffff600 0x100>;
115                                 interrupts = <3 4 1>;
116                                 #gpio-cells = <2>;
117                                 gpio-controller;
118                                 interrupt-controller;
119                                 #interrupt-cells = <2>;
120                         };
121
122                         pioC: gpio@fffff800 {
123                                 compatible = "atmel,at91rm9200-gpio";
124                                 reg = <0xfffff800 0x100>;
125                                 interrupts = <4 4 1>;
126                                 #gpio-cells = <2>;
127                                 gpio-controller;
128                                 interrupt-controller;
129                                 #interrupt-cells = <2>;
130                         };
131
132                         dbgu: serial@fffff200 {
133                                 compatible = "atmel,at91sam9260-usart";
134                                 reg = <0xfffff200 0x200>;
135                                 interrupts = <1 4 7>;
136                                 status = "disabled";
137                         };
138
139                         usart0: serial@fffb0000 {
140                                 compatible = "atmel,at91sam9260-usart";
141                                 reg = <0xfffb0000 0x200>;
142                                 interrupts = <6 4 5>;
143                                 atmel,use-dma-rx;
144                                 atmel,use-dma-tx;
145                                 status = "disabled";
146                         };
147
148                         usart1: serial@fffb4000 {
149                                 compatible = "atmel,at91sam9260-usart";
150                                 reg = <0xfffb4000 0x200>;
151                                 interrupts = <7 4 5>;
152                                 atmel,use-dma-rx;
153                                 atmel,use-dma-tx;
154                                 status = "disabled";
155                         };
156
157                         usart2: serial@fffb8000 {
158                                 compatible = "atmel,at91sam9260-usart";
159                                 reg = <0xfffb8000 0x200>;
160                                 interrupts = <8 4 5>;
161                                 atmel,use-dma-rx;
162                                 atmel,use-dma-tx;
163                                 status = "disabled";
164                         };
165
166                         usart3: serial@fffd0000 {
167                                 compatible = "atmel,at91sam9260-usart";
168                                 reg = <0xfffd0000 0x200>;
169                                 interrupts = <23 4 5>;
170                                 atmel,use-dma-rx;
171                                 atmel,use-dma-tx;
172                                 status = "disabled";
173                         };
174
175                         usart4: serial@fffd4000 {
176                                 compatible = "atmel,at91sam9260-usart";
177                                 reg = <0xfffd4000 0x200>;
178                                 interrupts = <24 4 5>;
179                                 atmel,use-dma-rx;
180                                 atmel,use-dma-tx;
181                                 status = "disabled";
182                         };
183
184                         usart5: serial@fffd8000 {
185                                 compatible = "atmel,at91sam9260-usart";
186                                 reg = <0xfffd8000 0x200>;
187                                 interrupts = <25 4 5>;
188                                 atmel,use-dma-rx;
189                                 atmel,use-dma-tx;
190                                 status = "disabled";
191                         };
192
193                         macb0: ethernet@fffc4000 {
194                                 compatible = "cdns,at32ap7000-macb", "cdns,macb";
195                                 reg = <0xfffc4000 0x100>;
196                                 interrupts = <21 4 3>;
197                                 status = "disabled";
198                         };
199
200                         usb1: gadget@fffa4000 {
201                                 compatible = "atmel,at91rm9200-udc";
202                                 reg = <0xfffa4000 0x4000>;
203                                 interrupts = <10 4 2>;
204                                 status = "disabled";
205                         };
206
207                         i2c0: i2c@fffac000 {
208                                 compatible = "atmel,at91sam9260-i2c";
209                                 reg = <0xfffac000 0x100>;
210                                 interrupts = <11 4 6>;
211                                 #address-cells = <1>;
212                                 #size-cells = <0>;
213                                 status = "disabled";
214                         };
215
216                         ssc0: ssc@fffbc000 {
217                                 compatible = "atmel,at91rm9200-ssc";
218                                 reg = <0xfffbc000 0x4000>;
219                                 interrupts = <14 4 5>;
220                                 status = "disabled";
221                         };
222
223                         adc0: adc@fffe0000 {
224                                 compatible = "atmel,at91sam9260-adc";
225                                 reg = <0xfffe0000 0x100>;
226                                 interrupts = <5 4 0>;
227                                 atmel,adc-use-external-triggers;
228                                 atmel,adc-channels-used = <0xf>;
229                                 atmel,adc-vref = <3300>;
230                                 atmel,adc-num-channels = <4>;
231                                 atmel,adc-startup-time = <15>;
232                                 atmel,adc-channel-base = <0x30>;
233                                 atmel,adc-drdy-mask = <0x10000>;
234                                 atmel,adc-status-register = <0x1c>;
235                                 atmel,adc-trigger-register = <0x04>;
236
237                                 trigger@0 {
238                                         trigger-name = "timer-counter-0";
239                                         trigger-value = <0x1>;
240                                 };
241                                 trigger@1 {
242                                         trigger-name = "timer-counter-1";
243                                         trigger-value = <0x3>;
244                                 };
245
246                                 trigger@2 {
247                                         trigger-name = "timer-counter-2";
248                                         trigger-value = <0x5>;
249                                 };
250
251                                 trigger@3 {
252                                         trigger-name = "external";
253                                         trigger-value = <0x13>;
254                                         trigger-external;
255                                 };
256                         };
257                 };
258
259                 nand0: nand@40000000 {
260                         compatible = "atmel,at91rm9200-nand";
261                         #address-cells = <1>;
262                         #size-cells = <1>;
263                         reg = <0x40000000 0x10000000
264                                0xffffe800 0x200
265                               >;
266                         atmel,nand-addr-offset = <21>;
267                         atmel,nand-cmd-offset = <22>;
268                         gpios = <&pioC 13 0
269                                  &pioC 14 0
270                                  0
271                                 >;
272                         status = "disabled";
273                 };
274
275                 usb0: ohci@00500000 {
276                         compatible = "atmel,at91rm9200-ohci", "usb-ohci";
277                         reg = <0x00500000 0x100000>;
278                         interrupts = <20 4 2>;
279                         status = "disabled";
280                 };
281         };
282
283         i2c@0 {
284                 compatible = "i2c-gpio";
285                 gpios = <&pioA 23 0 /* sda */
286                          &pioA 24 0 /* scl */
287                         >;
288                 i2c-gpio,sda-open-drain;
289                 i2c-gpio,scl-open-drain;
290                 i2c-gpio,delay-us = <2>;        /* ~100 kHz */
291                 #address-cells = <1>;
292                 #size-cells = <0>;
293                 status = "disabled";
294         };
295 };