]> git.openfabrics.org - ~shefty/rdma-dev.git/blob - arch/arm/boot/dts/at91sam9263.dtsi
ASoC: atmel-ssc: change disable to disable in dts node
[~shefty/rdma-dev.git] / arch / arm / boot / dts / at91sam9263.dtsi
1 /*
2  * at91sam9263.dtsi - Device Tree Include file for AT91SAM9263 family SoC
3  *
4  *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5  *
6  * Licensed under GPLv2 only.
7  */
8
9 /include/ "skeleton.dtsi"
10
11 / {
12         model = "Atmel AT91SAM9263 family SoC";
13         compatible = "atmel,at91sam9263";
14         interrupt-parent = <&aic>;
15
16         aliases {
17                 serial0 = &dbgu;
18                 serial1 = &usart0;
19                 serial2 = &usart1;
20                 serial3 = &usart2;
21                 gpio0 = &pioA;
22                 gpio1 = &pioB;
23                 gpio2 = &pioC;
24                 gpio3 = &pioD;
25                 gpio4 = &pioE;
26                 tcb0 = &tcb0;
27                 i2c0 = &i2c0;
28                 ssc0 = &ssc0;
29                 ssc1 = &ssc1;
30         };
31         cpus {
32                 cpu@0 {
33                         compatible = "arm,arm926ejs";
34                 };
35         };
36
37         memory {
38                 reg = <0x20000000 0x08000000>;
39         };
40
41         ahb {
42                 compatible = "simple-bus";
43                 #address-cells = <1>;
44                 #size-cells = <1>;
45                 ranges;
46
47                 apb {
48                         compatible = "simple-bus";
49                         #address-cells = <1>;
50                         #size-cells = <1>;
51                         ranges;
52
53                         aic: interrupt-controller@fffff000 {
54                                 #interrupt-cells = <3>;
55                                 compatible = "atmel,at91rm9200-aic";
56                                 interrupt-controller;
57                                 reg = <0xfffff000 0x200>;
58                                 atmel,external-irqs = <30 31>;
59                         };
60
61                         pmc: pmc@fffffc00 {
62                                 compatible = "atmel,at91rm9200-pmc";
63                                 reg = <0xfffffc00 0x100>;
64                         };
65
66                         ramc: ramc@ffffe200 {
67                                 compatible = "atmel,at91sam9260-sdramc";
68                                 reg = <0xffffe200 0x200
69                                        0xffffe800 0x200>;
70                         };
71
72                         pit: timer@fffffd30 {
73                                 compatible = "atmel,at91sam9260-pit";
74                                 reg = <0xfffffd30 0xf>;
75                                 interrupts = <1 4 7>;
76                         };
77
78                         tcb0: timer@fff7c000 {
79                                 compatible = "atmel,at91rm9200-tcb";
80                                 reg = <0xfff7c000 0x100>;
81                                 interrupts = <19 4 0>;
82                         };
83
84                         rstc@fffffd00 {
85                                 compatible = "atmel,at91sam9260-rstc";
86                                 reg = <0xfffffd00 0x10>;
87                         };
88
89                         shdwc@fffffd10 {
90                                 compatible = "atmel,at91sam9260-shdwc";
91                                 reg = <0xfffffd10 0x10>;
92                         };
93
94                         pioA: gpio@fffff200 {
95                                 compatible = "atmel,at91rm9200-gpio";
96                                 reg = <0xfffff200 0x100>;
97                                 interrupts = <2 4 1>;
98                                 #gpio-cells = <2>;
99                                 gpio-controller;
100                                 interrupt-controller;
101                                 #interrupt-cells = <2>;
102                         };
103
104                         pioB: gpio@fffff400 {
105                                 compatible = "atmel,at91rm9200-gpio";
106                                 reg = <0xfffff400 0x100>;
107                                 interrupts = <3 4 1>;
108                                 #gpio-cells = <2>;
109                                 gpio-controller;
110                                 interrupt-controller;
111                                 #interrupt-cells = <2>;
112                         };
113
114                         pioC: gpio@fffff600 {
115                                 compatible = "atmel,at91rm9200-gpio";
116                                 reg = <0xfffff600 0x100>;
117                                 interrupts = <4 4 1>;
118                                 #gpio-cells = <2>;
119                                 gpio-controller;
120                                 interrupt-controller;
121                                 #interrupt-cells = <2>;
122                         };
123
124                         pioD: gpio@fffff800 {
125                                 compatible = "atmel,at91rm9200-gpio";
126                                 reg = <0xfffff800 0x100>;
127                                 interrupts = <4 4 1>;
128                                 #gpio-cells = <2>;
129                                 gpio-controller;
130                                 interrupt-controller;
131                                 #interrupt-cells = <2>;
132                         };
133
134                         pioE: gpio@fffffa00 {
135                                 compatible = "atmel,at91rm9200-gpio";
136                                 reg = <0xfffffa00 0x100>;
137                                 interrupts = <4 4 1>;
138                                 #gpio-cells = <2>;
139                                 gpio-controller;
140                                 interrupt-controller;
141                                 #interrupt-cells = <2>;
142                         };
143
144                         dbgu: serial@ffffee00 {
145                                 compatible = "atmel,at91sam9260-usart";
146                                 reg = <0xffffee00 0x200>;
147                                 interrupts = <1 4 7>;
148                                 status = "disabled";
149                         };
150
151                         usart0: serial@fff8c000 {
152                                 compatible = "atmel,at91sam9260-usart";
153                                 reg = <0xfff8c000 0x200>;
154                                 interrupts = <7 4 5>;
155                                 atmel,use-dma-rx;
156                                 atmel,use-dma-tx;
157                                 status = "disabled";
158                         };
159
160                         usart1: serial@fff90000 {
161                                 compatible = "atmel,at91sam9260-usart";
162                                 reg = <0xfff90000 0x200>;
163                                 interrupts = <8 4 5>;
164                                 atmel,use-dma-rx;
165                                 atmel,use-dma-tx;
166                                 status = "disabled";
167                         };
168
169                         usart2: serial@fff94000 {
170                                 compatible = "atmel,at91sam9260-usart";
171                                 reg = <0xfff94000 0x200>;
172                                 interrupts = <9 4 5>;
173                                 atmel,use-dma-rx;
174                                 atmel,use-dma-tx;
175                                 status = "disabled";
176                         };
177
178                         ssc0: ssc@fff98000 {
179                                 compatible = "atmel,at91rm9200-ssc";
180                                 reg = <0xfff98000 0x4000>;
181                                 interrupts = <16 4 5>;
182                                 status = "disabled";
183                         };
184
185                         ssc1: ssc@fff9c000 {
186                                 compatible = "atmel,at91rm9200-ssc";
187                                 reg = <0xfff9c000 0x4000>;
188                                 interrupts = <17 4 5>;
189                                 status = "disabled";
190                         };
191
192                         macb0: ethernet@fffbc000 {
193                                 compatible = "cdns,at32ap7000-macb", "cdns,macb";
194                                 reg = <0xfffbc000 0x100>;
195                                 interrupts = <21 4 3>;
196                                 status = "disabled";
197                         };
198
199                         usb1: gadget@fff78000 {
200                                 compatible = "atmel,at91rm9200-udc";
201                                 reg = <0xfff78000 0x4000>;
202                                 interrupts = <24 4 2>;
203                                 status = "disabled";
204                         };
205
206                         i2c0: i2c@fff88000 {
207                                 compatible = "atmel,at91sam9263-i2c";
208                                 reg = <0xfff88000 0x100>;
209                                 interrupts = <13 4 6>;
210                                 #address-cells = <1>;
211                                 #size-cells = <0>;
212                                 status = "disabled";
213                         };
214                 };
215
216                 nand0: nand@40000000 {
217                         compatible = "atmel,at91rm9200-nand";
218                         #address-cells = <1>;
219                         #size-cells = <1>;
220                         reg = <0x40000000 0x10000000
221                                0xffffe000 0x200
222                               >;
223                         atmel,nand-addr-offset = <21>;
224                         atmel,nand-cmd-offset = <22>;
225                         gpios = <&pioA 22 0
226                                  &pioD 15 0
227                                  0
228                                 >;
229                         status = "disabled";
230                 };
231
232                 usb0: ohci@00a00000 {
233                         compatible = "atmel,at91rm9200-ohci", "usb-ohci";
234                         reg = <0x00a00000 0x100000>;
235                         interrupts = <29 4 2>;
236                         status = "disabled";
237                 };
238         };
239
240         i2c@0 {
241                 compatible = "i2c-gpio";
242                 gpios = <&pioB 4 0 /* sda */
243                          &pioB 5 0 /* scl */
244                         >;
245                 i2c-gpio,sda-open-drain;
246                 i2c-gpio,scl-open-drain;
247                 i2c-gpio,delay-us = <2>;        /* ~100 kHz */
248                 #address-cells = <1>;
249                 #size-cells = <0>;
250                 status = "disabled";
251         };
252 };