Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...
[~shefty/rdma-dev.git] / drivers / net / wireless / ath / ath9k / main.c
1 /*
2  * Copyright (c) 2008-2009 Atheros Communications Inc.
3  *
4  * Permission to use, copy, modify, and/or distribute this software for any
5  * purpose with or without fee is hereby granted, provided that the above
6  * copyright notice and this permission notice appear in all copies.
7  *
8  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
9  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
10  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
11  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
12  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
13  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
14  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
15  */
16
17 #include <linux/nl80211.h>
18 #include "ath9k.h"
19 #include "btcoex.h"
20
21 static void ath_update_txpow(struct ath_softc *sc)
22 {
23         struct ath_hw *ah = sc->sc_ah;
24
25         if (sc->curtxpow != sc->config.txpowlimit) {
26                 ath9k_hw_set_txpowerlimit(ah, sc->config.txpowlimit, false);
27                 /* read back in case value is clamped */
28                 sc->curtxpow = ath9k_hw_regulatory(ah)->power_limit;
29         }
30 }
31
32 static u8 parse_mpdudensity(u8 mpdudensity)
33 {
34         /*
35          * 802.11n D2.0 defined values for "Minimum MPDU Start Spacing":
36          *   0 for no restriction
37          *   1 for 1/4 us
38          *   2 for 1/2 us
39          *   3 for 1 us
40          *   4 for 2 us
41          *   5 for 4 us
42          *   6 for 8 us
43          *   7 for 16 us
44          */
45         switch (mpdudensity) {
46         case 0:
47                 return 0;
48         case 1:
49         case 2:
50         case 3:
51                 /* Our lower layer calculations limit our precision to
52                    1 microsecond */
53                 return 1;
54         case 4:
55                 return 2;
56         case 5:
57                 return 4;
58         case 6:
59                 return 8;
60         case 7:
61                 return 16;
62         default:
63                 return 0;
64         }
65 }
66
67 static struct ath9k_channel *ath_get_curchannel(struct ath_softc *sc,
68                                                 struct ieee80211_hw *hw)
69 {
70         struct ieee80211_channel *curchan = hw->conf.channel;
71         struct ath9k_channel *channel;
72         u8 chan_idx;
73
74         chan_idx = curchan->hw_value;
75         channel = &sc->sc_ah->channels[chan_idx];
76         ath9k_update_ichannel(sc, hw, channel);
77         return channel;
78 }
79
80 bool ath9k_setpower(struct ath_softc *sc, enum ath9k_power_mode mode)
81 {
82         unsigned long flags;
83         bool ret;
84
85         spin_lock_irqsave(&sc->sc_pm_lock, flags);
86         ret = ath9k_hw_setpower(sc->sc_ah, mode);
87         spin_unlock_irqrestore(&sc->sc_pm_lock, flags);
88
89         return ret;
90 }
91
92 void ath9k_ps_wakeup(struct ath_softc *sc)
93 {
94         struct ath_common *common = ath9k_hw_common(sc->sc_ah);
95         unsigned long flags;
96         enum ath9k_power_mode power_mode;
97
98         spin_lock_irqsave(&sc->sc_pm_lock, flags);
99         if (++sc->ps_usecount != 1)
100                 goto unlock;
101
102         power_mode = sc->sc_ah->power_mode;
103         ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_AWAKE);
104
105         /*
106          * While the hardware is asleep, the cycle counters contain no
107          * useful data. Better clear them now so that they don't mess up
108          * survey data results.
109          */
110         if (power_mode != ATH9K_PM_AWAKE) {
111                 spin_lock(&common->cc_lock);
112                 ath_hw_cycle_counters_update(common);
113                 memset(&common->cc_survey, 0, sizeof(common->cc_survey));
114                 spin_unlock(&common->cc_lock);
115         }
116
117  unlock:
118         spin_unlock_irqrestore(&sc->sc_pm_lock, flags);
119 }
120
121 void ath9k_ps_restore(struct ath_softc *sc)
122 {
123         struct ath_common *common = ath9k_hw_common(sc->sc_ah);
124         unsigned long flags;
125
126         spin_lock_irqsave(&sc->sc_pm_lock, flags);
127         if (--sc->ps_usecount != 0)
128                 goto unlock;
129
130         spin_lock(&common->cc_lock);
131         ath_hw_cycle_counters_update(common);
132         spin_unlock(&common->cc_lock);
133
134         if (sc->ps_idle)
135                 ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_FULL_SLEEP);
136         else if (sc->ps_enabled &&
137                  !(sc->ps_flags & (PS_WAIT_FOR_BEACON |
138                               PS_WAIT_FOR_CAB |
139                               PS_WAIT_FOR_PSPOLL_DATA |
140                               PS_WAIT_FOR_TX_ACK)))
141                 ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_NETWORK_SLEEP);
142
143  unlock:
144         spin_unlock_irqrestore(&sc->sc_pm_lock, flags);
145 }
146
147 static void ath_start_ani(struct ath_common *common)
148 {
149         struct ath_hw *ah = common->ah;
150         unsigned long timestamp = jiffies_to_msecs(jiffies);
151         struct ath_softc *sc = (struct ath_softc *) common->priv;
152
153         if (!(sc->sc_flags & SC_OP_ANI_RUN))
154                 return;
155
156         if (sc->sc_flags & SC_OP_OFFCHANNEL)
157                 return;
158
159         common->ani.longcal_timer = timestamp;
160         common->ani.shortcal_timer = timestamp;
161         common->ani.checkani_timer = timestamp;
162
163         mod_timer(&common->ani.timer,
164                   jiffies +
165                         msecs_to_jiffies((u32)ah->config.ani_poll_interval));
166 }
167
168 static void ath_update_survey_nf(struct ath_softc *sc, int channel)
169 {
170         struct ath_hw *ah = sc->sc_ah;
171         struct ath9k_channel *chan = &ah->channels[channel];
172         struct survey_info *survey = &sc->survey[channel];
173
174         if (chan->noisefloor) {
175                 survey->filled |= SURVEY_INFO_NOISE_DBM;
176                 survey->noise = chan->noisefloor;
177         }
178 }
179
180 static void ath_update_survey_stats(struct ath_softc *sc)
181 {
182         struct ath_hw *ah = sc->sc_ah;
183         struct ath_common *common = ath9k_hw_common(ah);
184         int pos = ah->curchan - &ah->channels[0];
185         struct survey_info *survey = &sc->survey[pos];
186         struct ath_cycle_counters *cc = &common->cc_survey;
187         unsigned int div = common->clockrate * 1000;
188
189         if (!ah->curchan)
190                 return;
191
192         if (ah->power_mode == ATH9K_PM_AWAKE)
193                 ath_hw_cycle_counters_update(common);
194
195         if (cc->cycles > 0) {
196                 survey->filled |= SURVEY_INFO_CHANNEL_TIME |
197                         SURVEY_INFO_CHANNEL_TIME_BUSY |
198                         SURVEY_INFO_CHANNEL_TIME_RX |
199                         SURVEY_INFO_CHANNEL_TIME_TX;
200                 survey->channel_time += cc->cycles / div;
201                 survey->channel_time_busy += cc->rx_busy / div;
202                 survey->channel_time_rx += cc->rx_frame / div;
203                 survey->channel_time_tx += cc->tx_frame / div;
204         }
205         memset(cc, 0, sizeof(*cc));
206
207         ath_update_survey_nf(sc, pos);
208 }
209
210 /*
211  * Set/change channels.  If the channel is really being changed, it's done
212  * by reseting the chip.  To accomplish this we must first cleanup any pending
213  * DMA, then restart stuff.
214 */
215 int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw,
216                     struct ath9k_channel *hchan)
217 {
218         struct ath_wiphy *aphy = hw->priv;
219         struct ath_hw *ah = sc->sc_ah;
220         struct ath_common *common = ath9k_hw_common(ah);
221         struct ieee80211_conf *conf = &common->hw->conf;
222         bool fastcc = true, stopped;
223         struct ieee80211_channel *channel = hw->conf.channel;
224         struct ath9k_hw_cal_data *caldata = NULL;
225         int r;
226
227         if (sc->sc_flags & SC_OP_INVALID)
228                 return -EIO;
229
230         del_timer_sync(&common->ani.timer);
231         cancel_work_sync(&sc->paprd_work);
232         cancel_work_sync(&sc->hw_check_work);
233         cancel_delayed_work_sync(&sc->tx_complete_work);
234
235         ath9k_ps_wakeup(sc);
236
237         spin_lock_bh(&sc->sc_pcu_lock);
238
239         /*
240          * This is only performed if the channel settings have
241          * actually changed.
242          *
243          * To switch channels clear any pending DMA operations;
244          * wait long enough for the RX fifo to drain, reset the
245          * hardware at the new frequency, and then re-enable
246          * the relevant bits of the h/w.
247          */
248         ath9k_hw_disable_interrupts(ah);
249         stopped = ath_drain_all_txq(sc, false);
250
251         if (!ath_stoprecv(sc))
252                 stopped = false;
253
254         /* XXX: do not flush receive queue here. We don't want
255          * to flush data frames already in queue because of
256          * changing channel. */
257
258         if (!stopped || !(sc->sc_flags & SC_OP_OFFCHANNEL))
259                 fastcc = false;
260
261         if (!(sc->sc_flags & SC_OP_OFFCHANNEL))
262                 caldata = &aphy->caldata;
263
264         ath_dbg(common, ATH_DBG_CONFIG,
265                 "(%u MHz) -> (%u MHz), conf_is_ht40: %d fastcc: %d\n",
266                 sc->sc_ah->curchan->channel,
267                 channel->center_freq, conf_is_ht40(conf),
268                 fastcc);
269
270         r = ath9k_hw_reset(ah, hchan, caldata, fastcc);
271         if (r) {
272                 ath_err(common,
273                         "Unable to reset channel (%u MHz), reset status %d\n",
274                         channel->center_freq, r);
275                 goto ps_restore;
276         }
277
278         if (ath_startrecv(sc) != 0) {
279                 ath_err(common, "Unable to restart recv logic\n");
280                 r = -EIO;
281                 goto ps_restore;
282         }
283
284         ath_update_txpow(sc);
285         ath9k_hw_set_interrupts(ah, ah->imask);
286
287         if (!(sc->sc_flags & (SC_OP_OFFCHANNEL))) {
288                 ath_beacon_config(sc, NULL);
289                 ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work, 0);
290                 ath_start_ani(common);
291         }
292
293  ps_restore:
294         spin_unlock_bh(&sc->sc_pcu_lock);
295
296         ath9k_ps_restore(sc);
297         return r;
298 }
299
300 static void ath_paprd_activate(struct ath_softc *sc)
301 {
302         struct ath_hw *ah = sc->sc_ah;
303         struct ath9k_hw_cal_data *caldata = ah->caldata;
304         struct ath_common *common = ath9k_hw_common(ah);
305         int chain;
306
307         if (!caldata || !caldata->paprd_done)
308                 return;
309
310         ath9k_ps_wakeup(sc);
311         ar9003_paprd_enable(ah, false);
312         for (chain = 0; chain < AR9300_MAX_CHAINS; chain++) {
313                 if (!(common->tx_chainmask & BIT(chain)))
314                         continue;
315
316                 ar9003_paprd_populate_single_table(ah, caldata, chain);
317         }
318
319         ar9003_paprd_enable(ah, true);
320         ath9k_ps_restore(sc);
321 }
322
323 void ath_paprd_calibrate(struct work_struct *work)
324 {
325         struct ath_softc *sc = container_of(work, struct ath_softc, paprd_work);
326         struct ieee80211_hw *hw = sc->hw;
327         struct ath_hw *ah = sc->sc_ah;
328         struct ieee80211_hdr *hdr;
329         struct sk_buff *skb = NULL;
330         struct ieee80211_tx_info *tx_info;
331         int band = hw->conf.channel->band;
332         struct ieee80211_supported_band *sband = &sc->sbands[band];
333         struct ath_tx_control txctl;
334         struct ath9k_hw_cal_data *caldata = ah->caldata;
335         struct ath_common *common = ath9k_hw_common(ah);
336         int ftype;
337         int chain_ok = 0;
338         int chain;
339         int len = 1800;
340         int time_left;
341         int i;
342
343         if (!caldata)
344                 return;
345
346         skb = alloc_skb(len, GFP_KERNEL);
347         if (!skb)
348                 return;
349
350         tx_info = IEEE80211_SKB_CB(skb);
351
352         skb_put(skb, len);
353         memset(skb->data, 0, len);
354         hdr = (struct ieee80211_hdr *)skb->data;
355         ftype = IEEE80211_FTYPE_DATA | IEEE80211_STYPE_NULLFUNC;
356         hdr->frame_control = cpu_to_le16(ftype);
357         hdr->duration_id = cpu_to_le16(10);
358         memcpy(hdr->addr1, hw->wiphy->perm_addr, ETH_ALEN);
359         memcpy(hdr->addr2, hw->wiphy->perm_addr, ETH_ALEN);
360         memcpy(hdr->addr3, hw->wiphy->perm_addr, ETH_ALEN);
361
362         memset(&txctl, 0, sizeof(txctl));
363         txctl.txq = sc->tx.txq_map[WME_AC_BE];
364
365         ath9k_ps_wakeup(sc);
366         ar9003_paprd_init_table(ah);
367         for (chain = 0; chain < AR9300_MAX_CHAINS; chain++) {
368                 if (!(common->tx_chainmask & BIT(chain)))
369                         continue;
370
371                 chain_ok = 0;
372                 memset(tx_info, 0, sizeof(*tx_info));
373                 tx_info->band = band;
374
375                 for (i = 0; i < 4; i++) {
376                         tx_info->control.rates[i].idx = sband->n_bitrates - 1;
377                         tx_info->control.rates[i].count = 6;
378                 }
379
380                 init_completion(&sc->paprd_complete);
381                 sc->paprd_pending = true;
382                 ar9003_paprd_setup_gain_table(ah, chain);
383                 txctl.paprd = BIT(chain);
384                 if (ath_tx_start(hw, skb, &txctl) != 0)
385                         break;
386
387                 time_left = wait_for_completion_timeout(&sc->paprd_complete,
388                                 msecs_to_jiffies(ATH_PAPRD_TIMEOUT));
389                 sc->paprd_pending = false;
390                 if (!time_left) {
391                         ath_dbg(ath9k_hw_common(ah), ATH_DBG_CALIBRATE,
392                                 "Timeout waiting for paprd training on TX chain %d\n",
393                                 chain);
394                         goto fail_paprd;
395                 }
396
397                 if (!ar9003_paprd_is_done(ah))
398                         break;
399
400                 if (ar9003_paprd_create_curve(ah, caldata, chain) != 0)
401                         break;
402
403                 chain_ok = 1;
404         }
405         kfree_skb(skb);
406
407         if (chain_ok) {
408                 caldata->paprd_done = true;
409                 ath_paprd_activate(sc);
410         }
411
412 fail_paprd:
413         ath9k_ps_restore(sc);
414 }
415
416 /*
417  *  This routine performs the periodic noise floor calibration function
418  *  that is used to adjust and optimize the chip performance.  This
419  *  takes environmental changes (location, temperature) into account.
420  *  When the task is complete, it reschedules itself depending on the
421  *  appropriate interval that was calculated.
422  */
423 void ath_ani_calibrate(unsigned long data)
424 {
425         struct ath_softc *sc = (struct ath_softc *)data;
426         struct ath_hw *ah = sc->sc_ah;
427         struct ath_common *common = ath9k_hw_common(ah);
428         bool longcal = false;
429         bool shortcal = false;
430         bool aniflag = false;
431         unsigned int timestamp = jiffies_to_msecs(jiffies);
432         u32 cal_interval, short_cal_interval, long_cal_interval;
433         unsigned long flags;
434
435         if (ah->caldata && ah->caldata->nfcal_interference)
436                 long_cal_interval = ATH_LONG_CALINTERVAL_INT;
437         else
438                 long_cal_interval = ATH_LONG_CALINTERVAL;
439
440         short_cal_interval = (ah->opmode == NL80211_IFTYPE_AP) ?
441                 ATH_AP_SHORT_CALINTERVAL : ATH_STA_SHORT_CALINTERVAL;
442
443         /* Only calibrate if awake */
444         if (sc->sc_ah->power_mode != ATH9K_PM_AWAKE)
445                 goto set_timer;
446
447         ath9k_ps_wakeup(sc);
448
449         /* Long calibration runs independently of short calibration. */
450         if ((timestamp - common->ani.longcal_timer) >= long_cal_interval) {
451                 longcal = true;
452                 ath_dbg(common, ATH_DBG_ANI, "longcal @%lu\n", jiffies);
453                 common->ani.longcal_timer = timestamp;
454         }
455
456         /* Short calibration applies only while caldone is false */
457         if (!common->ani.caldone) {
458                 if ((timestamp - common->ani.shortcal_timer) >= short_cal_interval) {
459                         shortcal = true;
460                         ath_dbg(common, ATH_DBG_ANI,
461                                 "shortcal @%lu\n", jiffies);
462                         common->ani.shortcal_timer = timestamp;
463                         common->ani.resetcal_timer = timestamp;
464                 }
465         } else {
466                 if ((timestamp - common->ani.resetcal_timer) >=
467                     ATH_RESTART_CALINTERVAL) {
468                         common->ani.caldone = ath9k_hw_reset_calvalid(ah);
469                         if (common->ani.caldone)
470                                 common->ani.resetcal_timer = timestamp;
471                 }
472         }
473
474         /* Verify whether we must check ANI */
475         if ((timestamp - common->ani.checkani_timer) >=
476              ah->config.ani_poll_interval) {
477                 aniflag = true;
478                 common->ani.checkani_timer = timestamp;
479         }
480
481         /* Skip all processing if there's nothing to do. */
482         if (longcal || shortcal || aniflag) {
483                 /* Call ANI routine if necessary */
484                 if (aniflag) {
485                         spin_lock_irqsave(&common->cc_lock, flags);
486                         ath9k_hw_ani_monitor(ah, ah->curchan);
487                         ath_update_survey_stats(sc);
488                         spin_unlock_irqrestore(&common->cc_lock, flags);
489                 }
490
491                 /* Perform calibration if necessary */
492                 if (longcal || shortcal) {
493                         common->ani.caldone =
494                                 ath9k_hw_calibrate(ah,
495                                                    ah->curchan,
496                                                    common->rx_chainmask,
497                                                    longcal);
498                 }
499         }
500
501         ath9k_ps_restore(sc);
502
503 set_timer:
504         /*
505         * Set timer interval based on previous results.
506         * The interval must be the shortest necessary to satisfy ANI,
507         * short calibration and long calibration.
508         */
509         cal_interval = ATH_LONG_CALINTERVAL;
510         if (sc->sc_ah->config.enable_ani)
511                 cal_interval = min(cal_interval,
512                                    (u32)ah->config.ani_poll_interval);
513         if (!common->ani.caldone)
514                 cal_interval = min(cal_interval, (u32)short_cal_interval);
515
516         mod_timer(&common->ani.timer, jiffies + msecs_to_jiffies(cal_interval));
517         if ((sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_PAPRD) && ah->caldata) {
518                 if (!ah->caldata->paprd_done)
519                         ieee80211_queue_work(sc->hw, &sc->paprd_work);
520                 else
521                         ath_paprd_activate(sc);
522         }
523 }
524
525 /*
526  * Update tx/rx chainmask. For legacy association,
527  * hard code chainmask to 1x1, for 11n association, use
528  * the chainmask configuration, for bt coexistence, use
529  * the chainmask configuration even in legacy mode.
530  */
531 void ath_update_chainmask(struct ath_softc *sc, int is_ht)
532 {
533         struct ath_hw *ah = sc->sc_ah;
534         struct ath_common *common = ath9k_hw_common(ah);
535
536         if ((sc->sc_flags & SC_OP_OFFCHANNEL) || is_ht ||
537             (ah->btcoex_hw.scheme != ATH_BTCOEX_CFG_NONE)) {
538                 common->tx_chainmask = ah->caps.tx_chainmask;
539                 common->rx_chainmask = ah->caps.rx_chainmask;
540         } else {
541                 common->tx_chainmask = 1;
542                 common->rx_chainmask = 1;
543         }
544
545         ath_dbg(common, ATH_DBG_CONFIG,
546                 "tx chmask: %d, rx chmask: %d\n",
547                 common->tx_chainmask,
548                 common->rx_chainmask);
549 }
550
551 static void ath_node_attach(struct ath_softc *sc, struct ieee80211_sta *sta)
552 {
553         struct ath_node *an;
554         struct ath_hw *ah = sc->sc_ah;
555         an = (struct ath_node *)sta->drv_priv;
556
557         if ((ah->caps.hw_caps) & ATH9K_HW_CAP_APM)
558                 sc->sc_flags |= SC_OP_ENABLE_APM;
559
560         if (sc->sc_flags & SC_OP_TXAGGR) {
561                 ath_tx_node_init(sc, an);
562                 an->maxampdu = 1 << (IEEE80211_HT_MAX_AMPDU_FACTOR +
563                                      sta->ht_cap.ampdu_factor);
564                 an->mpdudensity = parse_mpdudensity(sta->ht_cap.ampdu_density);
565         }
566 }
567
568 static void ath_node_detach(struct ath_softc *sc, struct ieee80211_sta *sta)
569 {
570         struct ath_node *an = (struct ath_node *)sta->drv_priv;
571
572         if (sc->sc_flags & SC_OP_TXAGGR)
573                 ath_tx_node_cleanup(sc, an);
574 }
575
576 void ath_hw_check(struct work_struct *work)
577 {
578         struct ath_softc *sc = container_of(work, struct ath_softc, hw_check_work);
579         int i;
580
581         ath9k_ps_wakeup(sc);
582
583         for (i = 0; i < 3; i++) {
584                 if (ath9k_hw_check_alive(sc->sc_ah))
585                         goto out;
586
587                 msleep(1);
588         }
589         ath_reset(sc, true);
590
591 out:
592         ath9k_ps_restore(sc);
593 }
594
595 void ath9k_tasklet(unsigned long data)
596 {
597         struct ath_softc *sc = (struct ath_softc *)data;
598         struct ath_hw *ah = sc->sc_ah;
599         struct ath_common *common = ath9k_hw_common(ah);
600
601         u32 status = sc->intrstatus;
602         u32 rxmask;
603
604         ath9k_ps_wakeup(sc);
605
606         if (status & ATH9K_INT_FATAL) {
607                 ath_reset(sc, true);
608                 ath9k_ps_restore(sc);
609                 return;
610         }
611
612         spin_lock_bh(&sc->sc_pcu_lock);
613
614         if (!ath9k_hw_check_alive(ah))
615                 ieee80211_queue_work(sc->hw, &sc->hw_check_work);
616
617         if (ah->caps.hw_caps & ATH9K_HW_CAP_EDMA)
618                 rxmask = (ATH9K_INT_RXHP | ATH9K_INT_RXLP | ATH9K_INT_RXEOL |
619                           ATH9K_INT_RXORN);
620         else
621                 rxmask = (ATH9K_INT_RX | ATH9K_INT_RXEOL | ATH9K_INT_RXORN);
622
623         if (status & rxmask) {
624                 /* Check for high priority Rx first */
625                 if ((ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) &&
626                     (status & ATH9K_INT_RXHP))
627                         ath_rx_tasklet(sc, 0, true);
628
629                 ath_rx_tasklet(sc, 0, false);
630         }
631
632         if (status & ATH9K_INT_TX) {
633                 if (ah->caps.hw_caps & ATH9K_HW_CAP_EDMA)
634                         ath_tx_edma_tasklet(sc);
635                 else
636                         ath_tx_tasklet(sc);
637         }
638
639         if ((status & ATH9K_INT_TSFOOR) && sc->ps_enabled) {
640                 /*
641                  * TSF sync does not look correct; remain awake to sync with
642                  * the next Beacon.
643                  */
644                 ath_dbg(common, ATH_DBG_PS,
645                         "TSFOOR - Sync with next Beacon\n");
646                 sc->ps_flags |= PS_WAIT_FOR_BEACON | PS_BEACON_SYNC;
647         }
648
649         if (ah->btcoex_hw.scheme == ATH_BTCOEX_CFG_3WIRE)
650                 if (status & ATH9K_INT_GENTIMER)
651                         ath_gen_timer_isr(sc->sc_ah);
652
653         /* re-enable hardware interrupt */
654         ath9k_hw_enable_interrupts(ah);
655
656         spin_unlock_bh(&sc->sc_pcu_lock);
657         ath9k_ps_restore(sc);
658 }
659
660 irqreturn_t ath_isr(int irq, void *dev)
661 {
662 #define SCHED_INTR (                            \
663                 ATH9K_INT_FATAL |               \
664                 ATH9K_INT_RXORN |               \
665                 ATH9K_INT_RXEOL |               \
666                 ATH9K_INT_RX |                  \
667                 ATH9K_INT_RXLP |                \
668                 ATH9K_INT_RXHP |                \
669                 ATH9K_INT_TX |                  \
670                 ATH9K_INT_BMISS |               \
671                 ATH9K_INT_CST |                 \
672                 ATH9K_INT_TSFOOR |              \
673                 ATH9K_INT_GENTIMER)
674
675         struct ath_softc *sc = dev;
676         struct ath_hw *ah = sc->sc_ah;
677         struct ath_common *common = ath9k_hw_common(ah);
678         enum ath9k_int status;
679         bool sched = false;
680
681         /*
682          * The hardware is not ready/present, don't
683          * touch anything. Note this can happen early
684          * on if the IRQ is shared.
685          */
686         if (sc->sc_flags & SC_OP_INVALID)
687                 return IRQ_NONE;
688
689
690         /* shared irq, not for us */
691
692         if (!ath9k_hw_intrpend(ah))
693                 return IRQ_NONE;
694
695         /*
696          * Figure out the reason(s) for the interrupt.  Note
697          * that the hal returns a pseudo-ISR that may include
698          * bits we haven't explicitly enabled so we mask the
699          * value to insure we only process bits we requested.
700          */
701         ath9k_hw_getisr(ah, &status);   /* NB: clears ISR too */
702         status &= ah->imask;    /* discard unasked-for bits */
703
704         /*
705          * If there are no status bits set, then this interrupt was not
706          * for me (should have been caught above).
707          */
708         if (!status)
709                 return IRQ_NONE;
710
711         /* Cache the status */
712         sc->intrstatus = status;
713
714         if (status & SCHED_INTR)
715                 sched = true;
716
717         /*
718          * If a FATAL or RXORN interrupt is received, we have to reset the
719          * chip immediately.
720          */
721         if ((status & ATH9K_INT_FATAL) || ((status & ATH9K_INT_RXORN) &&
722             !(ah->caps.hw_caps & ATH9K_HW_CAP_EDMA)))
723                 goto chip_reset;
724
725         if ((ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) &&
726             (status & ATH9K_INT_BB_WATCHDOG)) {
727
728                 spin_lock(&common->cc_lock);
729                 ath_hw_cycle_counters_update(common);
730                 ar9003_hw_bb_watchdog_dbg_info(ah);
731                 spin_unlock(&common->cc_lock);
732
733                 goto chip_reset;
734         }
735
736         if (status & ATH9K_INT_SWBA)
737                 tasklet_schedule(&sc->bcon_tasklet);
738
739         if (status & ATH9K_INT_TXURN)
740                 ath9k_hw_updatetxtriglevel(ah, true);
741
742         if (ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) {
743                 if (status & ATH9K_INT_RXEOL) {
744                         ah->imask &= ~(ATH9K_INT_RXEOL | ATH9K_INT_RXORN);
745                         ath9k_hw_set_interrupts(ah, ah->imask);
746                 }
747         }
748
749         if (status & ATH9K_INT_MIB) {
750                 /*
751                  * Disable interrupts until we service the MIB
752                  * interrupt; otherwise it will continue to
753                  * fire.
754                  */
755                 ath9k_hw_disable_interrupts(ah);
756                 /*
757                  * Let the hal handle the event. We assume
758                  * it will clear whatever condition caused
759                  * the interrupt.
760                  */
761                 spin_lock(&common->cc_lock);
762                 ath9k_hw_proc_mib_event(ah);
763                 spin_unlock(&common->cc_lock);
764                 ath9k_hw_enable_interrupts(ah);
765         }
766
767         if (!(ah->caps.hw_caps & ATH9K_HW_CAP_AUTOSLEEP))
768                 if (status & ATH9K_INT_TIM_TIMER) {
769                         if (ATH_DBG_WARN_ON_ONCE(sc->ps_idle))
770                                 goto chip_reset;
771                         /* Clear RxAbort bit so that we can
772                          * receive frames */
773                         ath9k_setpower(sc, ATH9K_PM_AWAKE);
774                         ath9k_hw_setrxabort(sc->sc_ah, 0);
775                         sc->ps_flags |= PS_WAIT_FOR_BEACON;
776                 }
777
778 chip_reset:
779
780         ath_debug_stat_interrupt(sc, status);
781
782         if (sched) {
783                 /* turn off every interrupt */
784                 ath9k_hw_disable_interrupts(ah);
785                 tasklet_schedule(&sc->intr_tq);
786         }
787
788         return IRQ_HANDLED;
789
790 #undef SCHED_INTR
791 }
792
793 static u32 ath_get_extchanmode(struct ath_softc *sc,
794                                struct ieee80211_channel *chan,
795                                enum nl80211_channel_type channel_type)
796 {
797         u32 chanmode = 0;
798
799         switch (chan->band) {
800         case IEEE80211_BAND_2GHZ:
801                 switch(channel_type) {
802                 case NL80211_CHAN_NO_HT:
803                 case NL80211_CHAN_HT20:
804                         chanmode = CHANNEL_G_HT20;
805                         break;
806                 case NL80211_CHAN_HT40PLUS:
807                         chanmode = CHANNEL_G_HT40PLUS;
808                         break;
809                 case NL80211_CHAN_HT40MINUS:
810                         chanmode = CHANNEL_G_HT40MINUS;
811                         break;
812                 }
813                 break;
814         case IEEE80211_BAND_5GHZ:
815                 switch(channel_type) {
816                 case NL80211_CHAN_NO_HT:
817                 case NL80211_CHAN_HT20:
818                         chanmode = CHANNEL_A_HT20;
819                         break;
820                 case NL80211_CHAN_HT40PLUS:
821                         chanmode = CHANNEL_A_HT40PLUS;
822                         break;
823                 case NL80211_CHAN_HT40MINUS:
824                         chanmode = CHANNEL_A_HT40MINUS;
825                         break;
826                 }
827                 break;
828         default:
829                 break;
830         }
831
832         return chanmode;
833 }
834
835 static void ath9k_bss_assoc_info(struct ath_softc *sc,
836                                  struct ieee80211_hw *hw,
837                                  struct ieee80211_vif *vif,
838                                  struct ieee80211_bss_conf *bss_conf)
839 {
840         struct ath_wiphy *aphy = hw->priv;
841         struct ath_hw *ah = sc->sc_ah;
842         struct ath_common *common = ath9k_hw_common(ah);
843
844         if (bss_conf->assoc) {
845                 ath_dbg(common, ATH_DBG_CONFIG,
846                         "Bss Info ASSOC %d, bssid: %pM\n",
847                         bss_conf->aid, common->curbssid);
848
849                 /* New association, store aid */
850                 common->curaid = bss_conf->aid;
851                 ath9k_hw_write_associd(ah);
852
853                 /*
854                  * Request a re-configuration of Beacon related timers
855                  * on the receipt of the first Beacon frame (i.e.,
856                  * after time sync with the AP).
857                  */
858                 sc->ps_flags |= PS_BEACON_SYNC;
859
860                 /* Configure the beacon */
861                 ath_beacon_config(sc, vif);
862
863                 /* Reset rssi stats */
864                 aphy->last_rssi = ATH_RSSI_DUMMY_MARKER;
865                 sc->sc_ah->stats.avgbrssi = ATH_RSSI_DUMMY_MARKER;
866
867                 sc->sc_flags |= SC_OP_ANI_RUN;
868                 ath_start_ani(common);
869         } else {
870                 ath_dbg(common, ATH_DBG_CONFIG, "Bss Info DISASSOC\n");
871                 common->curaid = 0;
872                 /* Stop ANI */
873                 sc->sc_flags &= ~SC_OP_ANI_RUN;
874                 del_timer_sync(&common->ani.timer);
875         }
876 }
877
878 void ath_radio_enable(struct ath_softc *sc, struct ieee80211_hw *hw)
879 {
880         struct ath_hw *ah = sc->sc_ah;
881         struct ath_common *common = ath9k_hw_common(ah);
882         struct ieee80211_channel *channel = hw->conf.channel;
883         int r;
884
885         ath9k_ps_wakeup(sc);
886         spin_lock_bh(&sc->sc_pcu_lock);
887
888         ath9k_hw_configpcipowersave(ah, 0, 0);
889
890         if (!ah->curchan)
891                 ah->curchan = ath_get_curchannel(sc, sc->hw);
892
893         r = ath9k_hw_reset(ah, ah->curchan, ah->caldata, false);
894         if (r) {
895                 ath_err(common,
896                         "Unable to reset channel (%u MHz), reset status %d\n",
897                         channel->center_freq, r);
898         }
899
900         ath_update_txpow(sc);
901         if (ath_startrecv(sc) != 0) {
902                 ath_err(common, "Unable to restart recv logic\n");
903                 spin_unlock_bh(&sc->sc_pcu_lock);
904                 return;
905         }
906         if (sc->sc_flags & SC_OP_BEACONS)
907                 ath_beacon_config(sc, NULL);    /* restart beacons */
908
909         /* Re-Enable  interrupts */
910         ath9k_hw_set_interrupts(ah, ah->imask);
911
912         /* Enable LED */
913         ath9k_hw_cfg_output(ah, ah->led_pin,
914                             AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
915         ath9k_hw_set_gpio(ah, ah->led_pin, 0);
916
917         ieee80211_wake_queues(hw);
918         spin_unlock_bh(&sc->sc_pcu_lock);
919
920         ath9k_ps_restore(sc);
921 }
922
923 void ath_radio_disable(struct ath_softc *sc, struct ieee80211_hw *hw)
924 {
925         struct ath_hw *ah = sc->sc_ah;
926         struct ieee80211_channel *channel = hw->conf.channel;
927         int r;
928
929         ath9k_ps_wakeup(sc);
930         spin_lock_bh(&sc->sc_pcu_lock);
931
932         ieee80211_stop_queues(hw);
933
934         /*
935          * Keep the LED on when the radio is disabled
936          * during idle unassociated state.
937          */
938         if (!sc->ps_idle) {
939                 ath9k_hw_set_gpio(ah, ah->led_pin, 1);
940                 ath9k_hw_cfg_gpio_input(ah, ah->led_pin);
941         }
942
943         /* Disable interrupts */
944         ath9k_hw_disable_interrupts(ah);
945
946         ath_drain_all_txq(sc, false);   /* clear pending tx frames */
947
948         ath_stoprecv(sc);               /* turn off frame recv */
949         ath_flushrecv(sc);              /* flush recv queue */
950
951         if (!ah->curchan)
952                 ah->curchan = ath_get_curchannel(sc, hw);
953
954         r = ath9k_hw_reset(ah, ah->curchan, ah->caldata, false);
955         if (r) {
956                 ath_err(ath9k_hw_common(sc->sc_ah),
957                         "Unable to reset channel (%u MHz), reset status %d\n",
958                         channel->center_freq, r);
959         }
960
961         ath9k_hw_phy_disable(ah);
962
963         ath9k_hw_configpcipowersave(ah, 1, 1);
964
965         spin_unlock_bh(&sc->sc_pcu_lock);
966         ath9k_ps_restore(sc);
967
968         ath9k_setpower(sc, ATH9K_PM_FULL_SLEEP);
969 }
970
971 int ath_reset(struct ath_softc *sc, bool retry_tx)
972 {
973         struct ath_hw *ah = sc->sc_ah;
974         struct ath_common *common = ath9k_hw_common(ah);
975         struct ieee80211_hw *hw = sc->hw;
976         int r;
977
978         /* Stop ANI */
979         del_timer_sync(&common->ani.timer);
980
981         spin_lock_bh(&sc->sc_pcu_lock);
982
983         ieee80211_stop_queues(hw);
984
985         ath9k_hw_disable_interrupts(ah);
986         ath_drain_all_txq(sc, retry_tx);
987
988         ath_stoprecv(sc);
989         ath_flushrecv(sc);
990
991         r = ath9k_hw_reset(ah, sc->sc_ah->curchan, ah->caldata, false);
992         if (r)
993                 ath_err(common,
994                         "Unable to reset hardware; reset status %d\n", r);
995
996         if (ath_startrecv(sc) != 0)
997                 ath_err(common, "Unable to start recv logic\n");
998
999         /*
1000          * We may be doing a reset in response to a request
1001          * that changes the channel so update any state that
1002          * might change as a result.
1003          */
1004         ath_update_txpow(sc);
1005
1006         if ((sc->sc_flags & SC_OP_BEACONS) || !(sc->sc_flags & (SC_OP_OFFCHANNEL)))
1007                 ath_beacon_config(sc, NULL);    /* restart beacons */
1008
1009         ath9k_hw_set_interrupts(ah, ah->imask);
1010
1011         if (retry_tx) {
1012                 int i;
1013                 for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) {
1014                         if (ATH_TXQ_SETUP(sc, i)) {
1015                                 spin_lock_bh(&sc->tx.txq[i].axq_lock);
1016                                 ath_txq_schedule(sc, &sc->tx.txq[i]);
1017                                 spin_unlock_bh(&sc->tx.txq[i].axq_lock);
1018                         }
1019                 }
1020         }
1021
1022         ieee80211_wake_queues(hw);
1023         spin_unlock_bh(&sc->sc_pcu_lock);
1024
1025         /* Start ANI */
1026         ath_start_ani(common);
1027
1028         return r;
1029 }
1030
1031 /* XXX: Remove me once we don't depend on ath9k_channel for all
1032  * this redundant data */
1033 void ath9k_update_ichannel(struct ath_softc *sc, struct ieee80211_hw *hw,
1034                            struct ath9k_channel *ichan)
1035 {
1036         struct ieee80211_channel *chan = hw->conf.channel;
1037         struct ieee80211_conf *conf = &hw->conf;
1038
1039         ichan->channel = chan->center_freq;
1040         ichan->chan = chan;
1041
1042         if (chan->band == IEEE80211_BAND_2GHZ) {
1043                 ichan->chanmode = CHANNEL_G;
1044                 ichan->channelFlags = CHANNEL_2GHZ | CHANNEL_OFDM | CHANNEL_G;
1045         } else {
1046                 ichan->chanmode = CHANNEL_A;
1047                 ichan->channelFlags = CHANNEL_5GHZ | CHANNEL_OFDM;
1048         }
1049
1050         if (conf_is_ht(conf))
1051                 ichan->chanmode = ath_get_extchanmode(sc, chan,
1052                                             conf->channel_type);
1053 }
1054
1055 /**********************/
1056 /* mac80211 callbacks */
1057 /**********************/
1058
1059 static int ath9k_start(struct ieee80211_hw *hw)
1060 {
1061         struct ath_wiphy *aphy = hw->priv;
1062         struct ath_softc *sc = aphy->sc;
1063         struct ath_hw *ah = sc->sc_ah;
1064         struct ath_common *common = ath9k_hw_common(ah);
1065         struct ieee80211_channel *curchan = hw->conf.channel;
1066         struct ath9k_channel *init_channel;
1067         int r;
1068
1069         ath_dbg(common, ATH_DBG_CONFIG,
1070                 "Starting driver with initial channel: %d MHz\n",
1071                 curchan->center_freq);
1072
1073         mutex_lock(&sc->mutex);
1074
1075         if (ath9k_wiphy_started(sc)) {
1076                 if (sc->chan_idx == curchan->hw_value) {
1077                         /*
1078                          * Already on the operational channel, the new wiphy
1079                          * can be marked active.
1080                          */
1081                         aphy->state = ATH_WIPHY_ACTIVE;
1082                         ieee80211_wake_queues(hw);
1083                 } else {
1084                         /*
1085                          * Another wiphy is on another channel, start the new
1086                          * wiphy in paused state.
1087                          */
1088                         aphy->state = ATH_WIPHY_PAUSED;
1089                         ieee80211_stop_queues(hw);
1090                 }
1091                 mutex_unlock(&sc->mutex);
1092                 return 0;
1093         }
1094         aphy->state = ATH_WIPHY_ACTIVE;
1095
1096         /* setup initial channel */
1097
1098         sc->chan_idx = curchan->hw_value;
1099
1100         init_channel = ath_get_curchannel(sc, hw);
1101
1102         /* Reset SERDES registers */
1103         ath9k_hw_configpcipowersave(ah, 0, 0);
1104
1105         /*
1106          * The basic interface to setting the hardware in a good
1107          * state is ``reset''.  On return the hardware is known to
1108          * be powered up and with interrupts disabled.  This must
1109          * be followed by initialization of the appropriate bits
1110          * and then setup of the interrupt mask.
1111          */
1112         spin_lock_bh(&sc->sc_pcu_lock);
1113         r = ath9k_hw_reset(ah, init_channel, ah->caldata, false);
1114         if (r) {
1115                 ath_err(common,
1116                         "Unable to reset hardware; reset status %d (freq %u MHz)\n",
1117                         r, curchan->center_freq);
1118                 spin_unlock_bh(&sc->sc_pcu_lock);
1119                 goto mutex_unlock;
1120         }
1121
1122         /*
1123          * This is needed only to setup initial state
1124          * but it's best done after a reset.
1125          */
1126         ath_update_txpow(sc);
1127
1128         /*
1129          * Setup the hardware after reset:
1130          * The receive engine is set going.
1131          * Frame transmit is handled entirely
1132          * in the frame output path; there's nothing to do
1133          * here except setup the interrupt mask.
1134          */
1135         if (ath_startrecv(sc) != 0) {
1136                 ath_err(common, "Unable to start recv logic\n");
1137                 r = -EIO;
1138                 spin_unlock_bh(&sc->sc_pcu_lock);
1139                 goto mutex_unlock;
1140         }
1141         spin_unlock_bh(&sc->sc_pcu_lock);
1142
1143         /* Setup our intr mask. */
1144         ah->imask = ATH9K_INT_TX | ATH9K_INT_RXEOL |
1145                     ATH9K_INT_RXORN | ATH9K_INT_FATAL |
1146                     ATH9K_INT_GLOBAL;
1147
1148         if (ah->caps.hw_caps & ATH9K_HW_CAP_EDMA)
1149                 ah->imask |= ATH9K_INT_RXHP |
1150                              ATH9K_INT_RXLP |
1151                              ATH9K_INT_BB_WATCHDOG;
1152         else
1153                 ah->imask |= ATH9K_INT_RX;
1154
1155         ah->imask |= ATH9K_INT_GTT;
1156
1157         if (ah->caps.hw_caps & ATH9K_HW_CAP_HT)
1158                 ah->imask |= ATH9K_INT_CST;
1159
1160         sc->sc_flags &= ~SC_OP_INVALID;
1161         sc->sc_ah->is_monitoring = false;
1162
1163         /* Disable BMISS interrupt when we're not associated */
1164         ah->imask &= ~(ATH9K_INT_SWBA | ATH9K_INT_BMISS);
1165         ath9k_hw_set_interrupts(ah, ah->imask);
1166
1167         ieee80211_wake_queues(hw);
1168
1169         ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work, 0);
1170
1171         if ((ah->btcoex_hw.scheme != ATH_BTCOEX_CFG_NONE) &&
1172             !ah->btcoex_hw.enabled) {
1173                 ath9k_hw_btcoex_set_weight(ah, AR_BT_COEX_WGHT,
1174                                            AR_STOMP_LOW_WLAN_WGHT);
1175                 ath9k_hw_btcoex_enable(ah);
1176
1177                 if (common->bus_ops->bt_coex_prep)
1178                         common->bus_ops->bt_coex_prep(common);
1179                 if (ah->btcoex_hw.scheme == ATH_BTCOEX_CFG_3WIRE)
1180                         ath9k_btcoex_timer_resume(sc);
1181         }
1182
1183         pm_qos_update_request(&sc->pm_qos_req, 55);
1184
1185         if (ah->caps.pcie_lcr_extsync_en && common->bus_ops->extn_synch_en)
1186                 common->bus_ops->extn_synch_en(common);
1187
1188 mutex_unlock:
1189         mutex_unlock(&sc->mutex);
1190
1191         return r;
1192 }
1193
1194 static int ath9k_tx(struct ieee80211_hw *hw,
1195                     struct sk_buff *skb)
1196 {
1197         struct ath_wiphy *aphy = hw->priv;
1198         struct ath_softc *sc = aphy->sc;
1199         struct ath_common *common = ath9k_hw_common(sc->sc_ah);
1200         struct ath_tx_control txctl;
1201         struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
1202
1203         if (aphy->state != ATH_WIPHY_ACTIVE && aphy->state != ATH_WIPHY_SCAN) {
1204                 ath_dbg(common, ATH_DBG_XMIT,
1205                         "ath9k: %s: TX in unexpected wiphy state %d\n",
1206                         wiphy_name(hw->wiphy), aphy->state);
1207                 goto exit;
1208         }
1209
1210         if (sc->ps_enabled) {
1211                 /*
1212                  * mac80211 does not set PM field for normal data frames, so we
1213                  * need to update that based on the current PS mode.
1214                  */
1215                 if (ieee80211_is_data(hdr->frame_control) &&
1216                     !ieee80211_is_nullfunc(hdr->frame_control) &&
1217                     !ieee80211_has_pm(hdr->frame_control)) {
1218                         ath_dbg(common, ATH_DBG_PS,
1219                                 "Add PM=1 for a TX frame while in PS mode\n");
1220                         hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM);
1221                 }
1222         }
1223
1224         if (unlikely(sc->sc_ah->power_mode != ATH9K_PM_AWAKE)) {
1225                 /*
1226                  * We are using PS-Poll and mac80211 can request TX while in
1227                  * power save mode. Need to wake up hardware for the TX to be
1228                  * completed and if needed, also for RX of buffered frames.
1229                  */
1230                 ath9k_ps_wakeup(sc);
1231                 if (!(sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_AUTOSLEEP))
1232                         ath9k_hw_setrxabort(sc->sc_ah, 0);
1233                 if (ieee80211_is_pspoll(hdr->frame_control)) {
1234                         ath_dbg(common, ATH_DBG_PS,
1235                                 "Sending PS-Poll to pick a buffered frame\n");
1236                         sc->ps_flags |= PS_WAIT_FOR_PSPOLL_DATA;
1237                 } else {
1238                         ath_dbg(common, ATH_DBG_PS,
1239                                 "Wake up to complete TX\n");
1240                         sc->ps_flags |= PS_WAIT_FOR_TX_ACK;
1241                 }
1242                 /*
1243                  * The actual restore operation will happen only after
1244                  * the sc_flags bit is cleared. We are just dropping
1245                  * the ps_usecount here.
1246                  */
1247                 ath9k_ps_restore(sc);
1248         }
1249
1250         memset(&txctl, 0, sizeof(struct ath_tx_control));
1251         txctl.txq = sc->tx.txq_map[skb_get_queue_mapping(skb)];
1252
1253         ath_dbg(common, ATH_DBG_XMIT, "transmitting packet, skb: %p\n", skb);
1254
1255         if (ath_tx_start(hw, skb, &txctl) != 0) {
1256                 ath_dbg(common, ATH_DBG_XMIT, "TX failed\n");
1257                 goto exit;
1258         }
1259
1260         return 0;
1261 exit:
1262         dev_kfree_skb_any(skb);
1263         return 0;
1264 }
1265
1266 static void ath9k_stop(struct ieee80211_hw *hw)
1267 {
1268         struct ath_wiphy *aphy = hw->priv;
1269         struct ath_softc *sc = aphy->sc;
1270         struct ath_hw *ah = sc->sc_ah;
1271         struct ath_common *common = ath9k_hw_common(ah);
1272         int i;
1273
1274         mutex_lock(&sc->mutex);
1275
1276         aphy->state = ATH_WIPHY_INACTIVE;
1277
1278         if (led_blink)
1279                 cancel_delayed_work_sync(&sc->ath_led_blink_work);
1280
1281         cancel_delayed_work_sync(&sc->tx_complete_work);
1282         cancel_work_sync(&sc->paprd_work);
1283         cancel_work_sync(&sc->hw_check_work);
1284
1285         for (i = 0; i < sc->num_sec_wiphy; i++) {
1286                 if (sc->sec_wiphy[i])
1287                         break;
1288         }
1289
1290         if (i == sc->num_sec_wiphy) {
1291                 cancel_delayed_work_sync(&sc->wiphy_work);
1292                 cancel_work_sync(&sc->chan_work);
1293         }
1294
1295         if (sc->sc_flags & SC_OP_INVALID) {
1296                 ath_dbg(common, ATH_DBG_ANY, "Device not present\n");
1297                 mutex_unlock(&sc->mutex);
1298                 return;
1299         }
1300
1301         if (ath9k_wiphy_started(sc)) {
1302                 mutex_unlock(&sc->mutex);
1303                 return; /* another wiphy still in use */
1304         }
1305
1306         /* Ensure HW is awake when we try to shut it down. */
1307         ath9k_ps_wakeup(sc);
1308
1309         if (ah->btcoex_hw.enabled) {
1310                 ath9k_hw_btcoex_disable(ah);
1311                 if (ah->btcoex_hw.scheme == ATH_BTCOEX_CFG_3WIRE)
1312                         ath9k_btcoex_timer_pause(sc);
1313         }
1314
1315         spin_lock_bh(&sc->sc_pcu_lock);
1316
1317         /* make sure h/w will not generate any interrupt
1318          * before setting the invalid flag. */
1319         ath9k_hw_disable_interrupts(ah);
1320
1321         if (!(sc->sc_flags & SC_OP_INVALID)) {
1322                 ath_drain_all_txq(sc, false);
1323                 ath_stoprecv(sc);
1324                 ath9k_hw_phy_disable(ah);
1325         } else
1326                 sc->rx.rxlink = NULL;
1327
1328         /* disable HAL and put h/w to sleep */
1329         ath9k_hw_disable(ah);
1330         ath9k_hw_configpcipowersave(ah, 1, 1);
1331
1332         spin_unlock_bh(&sc->sc_pcu_lock);
1333
1334         ath9k_ps_restore(sc);
1335
1336         /* Finally, put the chip in FULL SLEEP mode */
1337         ath9k_setpower(sc, ATH9K_PM_FULL_SLEEP);
1338
1339         sc->sc_flags |= SC_OP_INVALID;
1340
1341         pm_qos_update_request(&sc->pm_qos_req, PM_QOS_DEFAULT_VALUE);
1342
1343         mutex_unlock(&sc->mutex);
1344
1345         ath_dbg(common, ATH_DBG_CONFIG, "Driver halt\n");
1346 }
1347
1348 static int ath9k_add_interface(struct ieee80211_hw *hw,
1349                                struct ieee80211_vif *vif)
1350 {
1351         struct ath_wiphy *aphy = hw->priv;
1352         struct ath_softc *sc = aphy->sc;
1353         struct ath_hw *ah = sc->sc_ah;
1354         struct ath_common *common = ath9k_hw_common(ah);
1355         struct ath_vif *avp = (void *)vif->drv_priv;
1356         enum nl80211_iftype ic_opmode = NL80211_IFTYPE_UNSPECIFIED;
1357         int ret = 0;
1358
1359         mutex_lock(&sc->mutex);
1360
1361         switch (vif->type) {
1362         case NL80211_IFTYPE_STATION:
1363                 ic_opmode = NL80211_IFTYPE_STATION;
1364                 break;
1365         case NL80211_IFTYPE_WDS:
1366                 ic_opmode = NL80211_IFTYPE_WDS;
1367                 break;
1368         case NL80211_IFTYPE_ADHOC:
1369         case NL80211_IFTYPE_AP:
1370         case NL80211_IFTYPE_MESH_POINT:
1371                 if (sc->nbcnvifs >= ATH_BCBUF) {
1372                         ret = -ENOBUFS;
1373                         goto out;
1374                 }
1375                 ic_opmode = vif->type;
1376                 break;
1377         default:
1378                 ath_err(common, "Interface type %d not yet supported\n",
1379                         vif->type);
1380                 ret = -EOPNOTSUPP;
1381                 goto out;
1382         }
1383
1384         ath_dbg(common, ATH_DBG_CONFIG,
1385                 "Attach a VIF of type: %d\n", ic_opmode);
1386
1387         /* Set the VIF opmode */
1388         avp->av_opmode = ic_opmode;
1389         avp->av_bslot = -1;
1390
1391         sc->nvifs++;
1392
1393         ath9k_set_bssid_mask(hw, vif);
1394
1395         if (sc->nvifs > 1)
1396                 goto out; /* skip global settings for secondary vif */
1397
1398         if (ic_opmode == NL80211_IFTYPE_AP) {
1399                 ath9k_hw_set_tsfadjust(ah, 1);
1400                 sc->sc_flags |= SC_OP_TSF_RESET;
1401         }
1402
1403         /* Set the device opmode */
1404         ah->opmode = ic_opmode;
1405
1406         /*
1407          * Enable MIB interrupts when there are hardware phy counters.
1408          * Note we only do this (at the moment) for station mode.
1409          */
1410         if ((vif->type == NL80211_IFTYPE_STATION) ||
1411             (vif->type == NL80211_IFTYPE_ADHOC) ||
1412             (vif->type == NL80211_IFTYPE_MESH_POINT)) {
1413                 if (ah->config.enable_ani)
1414                         ah->imask |= ATH9K_INT_MIB;
1415                 ah->imask |= ATH9K_INT_TSFOOR;
1416         }
1417
1418         ath9k_hw_set_interrupts(ah, ah->imask);
1419
1420         if (vif->type == NL80211_IFTYPE_AP    ||
1421             vif->type == NL80211_IFTYPE_ADHOC) {
1422                 sc->sc_flags |= SC_OP_ANI_RUN;
1423                 ath_start_ani(common);
1424         }
1425
1426 out:
1427         mutex_unlock(&sc->mutex);
1428         return ret;
1429 }
1430
1431 static void ath9k_remove_interface(struct ieee80211_hw *hw,
1432                                    struct ieee80211_vif *vif)
1433 {
1434         struct ath_wiphy *aphy = hw->priv;
1435         struct ath_softc *sc = aphy->sc;
1436         struct ath_common *common = ath9k_hw_common(sc->sc_ah);
1437         struct ath_vif *avp = (void *)vif->drv_priv;
1438
1439         ath_dbg(common, ATH_DBG_CONFIG, "Detach Interface\n");
1440
1441         mutex_lock(&sc->mutex);
1442
1443         /* Stop ANI */
1444         sc->sc_flags &= ~SC_OP_ANI_RUN;
1445         del_timer_sync(&common->ani.timer);
1446
1447         /* Reclaim beacon resources */
1448         if ((sc->sc_ah->opmode == NL80211_IFTYPE_AP) ||
1449             (sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC) ||
1450             (sc->sc_ah->opmode == NL80211_IFTYPE_MESH_POINT)) {
1451                 /* Disable SWBA interrupt */
1452                 sc->sc_ah->imask &= ~ATH9K_INT_SWBA;
1453                 ath9k_ps_wakeup(sc);
1454                 ath9k_hw_set_interrupts(sc->sc_ah, sc->sc_ah->imask);
1455                 ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
1456                 ath9k_ps_restore(sc);
1457                 tasklet_kill(&sc->bcon_tasklet);
1458         }
1459
1460         ath_beacon_return(sc, avp);
1461         sc->sc_flags &= ~SC_OP_BEACONS;
1462
1463         if (sc->nbcnvifs) {
1464                 /* Re-enable SWBA interrupt */
1465                 sc->sc_ah->imask |= ATH9K_INT_SWBA;
1466                 ath9k_ps_wakeup(sc);
1467                 ath9k_hw_set_interrupts(sc->sc_ah, sc->sc_ah->imask);
1468                 ath9k_ps_restore(sc);
1469         }
1470
1471         sc->nvifs--;
1472
1473         mutex_unlock(&sc->mutex);
1474 }
1475
1476 static void ath9k_enable_ps(struct ath_softc *sc)
1477 {
1478         struct ath_hw *ah = sc->sc_ah;
1479
1480         sc->ps_enabled = true;
1481         if (!(ah->caps.hw_caps & ATH9K_HW_CAP_AUTOSLEEP)) {
1482                 if ((ah->imask & ATH9K_INT_TIM_TIMER) == 0) {
1483                         ah->imask |= ATH9K_INT_TIM_TIMER;
1484                         ath9k_hw_set_interrupts(ah, ah->imask);
1485                 }
1486                 ath9k_hw_setrxabort(ah, 1);
1487         }
1488 }
1489
1490 static void ath9k_disable_ps(struct ath_softc *sc)
1491 {
1492         struct ath_hw *ah = sc->sc_ah;
1493
1494         sc->ps_enabled = false;
1495         ath9k_hw_setpower(ah, ATH9K_PM_AWAKE);
1496         if (!(ah->caps.hw_caps & ATH9K_HW_CAP_AUTOSLEEP)) {
1497                 ath9k_hw_setrxabort(ah, 0);
1498                 sc->ps_flags &= ~(PS_WAIT_FOR_BEACON |
1499                                   PS_WAIT_FOR_CAB |
1500                                   PS_WAIT_FOR_PSPOLL_DATA |
1501                                   PS_WAIT_FOR_TX_ACK);
1502                 if (ah->imask & ATH9K_INT_TIM_TIMER) {
1503                         ah->imask &= ~ATH9K_INT_TIM_TIMER;
1504                         ath9k_hw_set_interrupts(ah, ah->imask);
1505                 }
1506         }
1507
1508 }
1509
1510 static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
1511 {
1512         struct ath_wiphy *aphy = hw->priv;
1513         struct ath_softc *sc = aphy->sc;
1514         struct ath_hw *ah = sc->sc_ah;
1515         struct ath_common *common = ath9k_hw_common(ah);
1516         struct ieee80211_conf *conf = &hw->conf;
1517         bool disable_radio;
1518
1519         mutex_lock(&sc->mutex);
1520
1521         /*
1522          * Leave this as the first check because we need to turn on the
1523          * radio if it was disabled before prior to processing the rest
1524          * of the changes. Likewise we must only disable the radio towards
1525          * the end.
1526          */
1527         if (changed & IEEE80211_CONF_CHANGE_IDLE) {
1528                 bool enable_radio;
1529                 bool all_wiphys_idle;
1530                 bool idle = !!(conf->flags & IEEE80211_CONF_IDLE);
1531
1532                 spin_lock_bh(&sc->wiphy_lock);
1533                 all_wiphys_idle =  ath9k_all_wiphys_idle(sc);
1534                 ath9k_set_wiphy_idle(aphy, idle);
1535
1536                 enable_radio = (!idle && all_wiphys_idle);
1537
1538                 /*
1539                  * After we unlock here its possible another wiphy
1540                  * can be re-renabled so to account for that we will
1541                  * only disable the radio toward the end of this routine
1542                  * if by then all wiphys are still idle.
1543                  */
1544                 spin_unlock_bh(&sc->wiphy_lock);
1545
1546                 if (enable_radio) {
1547                         sc->ps_idle = false;
1548                         ath_radio_enable(sc, hw);
1549                         ath_dbg(common, ATH_DBG_CONFIG,
1550                                 "not-idle: enabling radio\n");
1551                 }
1552         }
1553
1554         /*
1555          * We just prepare to enable PS. We have to wait until our AP has
1556          * ACK'd our null data frame to disable RX otherwise we'll ignore
1557          * those ACKs and end up retransmitting the same null data frames.
1558          * IEEE80211_CONF_CHANGE_PS is only passed by mac80211 for STA mode.
1559          */
1560         if (changed & IEEE80211_CONF_CHANGE_PS) {
1561                 unsigned long flags;
1562                 spin_lock_irqsave(&sc->sc_pm_lock, flags);
1563                 if (conf->flags & IEEE80211_CONF_PS)
1564                         ath9k_enable_ps(sc);
1565                 else
1566                         ath9k_disable_ps(sc);
1567                 spin_unlock_irqrestore(&sc->sc_pm_lock, flags);
1568         }
1569
1570         if (changed & IEEE80211_CONF_CHANGE_MONITOR) {
1571                 if (conf->flags & IEEE80211_CONF_MONITOR) {
1572                         ath_dbg(common, ATH_DBG_CONFIG,
1573                                 "Monitor mode is enabled\n");
1574                         sc->sc_ah->is_monitoring = true;
1575                 } else {
1576                         ath_dbg(common, ATH_DBG_CONFIG,
1577                                 "Monitor mode is disabled\n");
1578                         sc->sc_ah->is_monitoring = false;
1579                 }
1580         }
1581
1582         if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
1583                 struct ieee80211_channel *curchan = hw->conf.channel;
1584                 int pos = curchan->hw_value;
1585                 int old_pos = -1;
1586                 unsigned long flags;
1587
1588                 if (ah->curchan)
1589                         old_pos = ah->curchan - &ah->channels[0];
1590
1591                 aphy->chan_idx = pos;
1592                 aphy->chan_is_ht = conf_is_ht(conf);
1593                 if (hw->conf.flags & IEEE80211_CONF_OFFCHANNEL)
1594                         sc->sc_flags |= SC_OP_OFFCHANNEL;
1595                 else
1596                         sc->sc_flags &= ~SC_OP_OFFCHANNEL;
1597
1598                 if (aphy->state == ATH_WIPHY_SCAN ||
1599                     aphy->state == ATH_WIPHY_ACTIVE)
1600                         ath9k_wiphy_pause_all_forced(sc, aphy);
1601                 else {
1602                         /*
1603                          * Do not change operational channel based on a paused
1604                          * wiphy changes.
1605                          */
1606                         goto skip_chan_change;
1607                 }
1608
1609                 ath_dbg(common, ATH_DBG_CONFIG, "Set channel: %d MHz\n",
1610                         curchan->center_freq);
1611
1612                 /* XXX: remove me eventualy */
1613                 ath9k_update_ichannel(sc, hw, &sc->sc_ah->channels[pos]);
1614
1615                 ath_update_chainmask(sc, conf_is_ht(conf));
1616
1617                 /* update survey stats for the old channel before switching */
1618                 spin_lock_irqsave(&common->cc_lock, flags);
1619                 ath_update_survey_stats(sc);
1620                 spin_unlock_irqrestore(&common->cc_lock, flags);
1621
1622                 /*
1623                  * If the operating channel changes, change the survey in-use flags
1624                  * along with it.
1625                  * Reset the survey data for the new channel, unless we're switching
1626                  * back to the operating channel from an off-channel operation.
1627                  */
1628                 if (!(hw->conf.flags & IEEE80211_CONF_OFFCHANNEL) &&
1629                     sc->cur_survey != &sc->survey[pos]) {
1630
1631                         if (sc->cur_survey)
1632                                 sc->cur_survey->filled &= ~SURVEY_INFO_IN_USE;
1633
1634                         sc->cur_survey = &sc->survey[pos];
1635
1636                         memset(sc->cur_survey, 0, sizeof(struct survey_info));
1637                         sc->cur_survey->filled |= SURVEY_INFO_IN_USE;
1638                 } else if (!(sc->survey[pos].filled & SURVEY_INFO_IN_USE)) {
1639                         memset(&sc->survey[pos], 0, sizeof(struct survey_info));
1640                 }
1641
1642                 if (ath_set_channel(sc, hw, &sc->sc_ah->channels[pos]) < 0) {
1643                         ath_err(common, "Unable to set channel\n");
1644                         mutex_unlock(&sc->mutex);
1645                         return -EINVAL;
1646                 }
1647
1648                 /*
1649                  * The most recent snapshot of channel->noisefloor for the old
1650                  * channel is only available after the hardware reset. Copy it to
1651                  * the survey stats now.
1652                  */
1653                 if (old_pos >= 0)
1654                         ath_update_survey_nf(sc, old_pos);
1655         }
1656
1657 skip_chan_change:
1658         if (changed & IEEE80211_CONF_CHANGE_POWER) {
1659                 sc->config.txpowlimit = 2 * conf->power_level;
1660                 ath_update_txpow(sc);
1661         }
1662
1663         spin_lock_bh(&sc->wiphy_lock);
1664         disable_radio = ath9k_all_wiphys_idle(sc);
1665         spin_unlock_bh(&sc->wiphy_lock);
1666
1667         if (disable_radio) {
1668                 ath_dbg(common, ATH_DBG_CONFIG, "idle: disabling radio\n");
1669                 sc->ps_idle = true;
1670                 ath_radio_disable(sc, hw);
1671         }
1672
1673         mutex_unlock(&sc->mutex);
1674
1675         return 0;
1676 }
1677
1678 #define SUPPORTED_FILTERS                       \
1679         (FIF_PROMISC_IN_BSS |                   \
1680         FIF_ALLMULTI |                          \
1681         FIF_CONTROL |                           \
1682         FIF_PSPOLL |                            \
1683         FIF_OTHER_BSS |                         \
1684         FIF_BCN_PRBRESP_PROMISC |               \
1685         FIF_PROBE_REQ |                         \
1686         FIF_FCSFAIL)
1687
1688 /* FIXME: sc->sc_full_reset ? */
1689 static void ath9k_configure_filter(struct ieee80211_hw *hw,
1690                                    unsigned int changed_flags,
1691                                    unsigned int *total_flags,
1692                                    u64 multicast)
1693 {
1694         struct ath_wiphy *aphy = hw->priv;
1695         struct ath_softc *sc = aphy->sc;
1696         u32 rfilt;
1697
1698         changed_flags &= SUPPORTED_FILTERS;
1699         *total_flags &= SUPPORTED_FILTERS;
1700
1701         sc->rx.rxfilter = *total_flags;
1702         ath9k_ps_wakeup(sc);
1703         rfilt = ath_calcrxfilter(sc);
1704         ath9k_hw_setrxfilter(sc->sc_ah, rfilt);
1705         ath9k_ps_restore(sc);
1706
1707         ath_dbg(ath9k_hw_common(sc->sc_ah), ATH_DBG_CONFIG,
1708                 "Set HW RX filter: 0x%x\n", rfilt);
1709 }
1710
1711 static int ath9k_sta_add(struct ieee80211_hw *hw,
1712                          struct ieee80211_vif *vif,
1713                          struct ieee80211_sta *sta)
1714 {
1715         struct ath_wiphy *aphy = hw->priv;
1716         struct ath_softc *sc = aphy->sc;
1717
1718         ath_node_attach(sc, sta);
1719
1720         return 0;
1721 }
1722
1723 static int ath9k_sta_remove(struct ieee80211_hw *hw,
1724                             struct ieee80211_vif *vif,
1725                             struct ieee80211_sta *sta)
1726 {
1727         struct ath_wiphy *aphy = hw->priv;
1728         struct ath_softc *sc = aphy->sc;
1729
1730         ath_node_detach(sc, sta);
1731
1732         return 0;
1733 }
1734
1735 static int ath9k_conf_tx(struct ieee80211_hw *hw, u16 queue,
1736                          const struct ieee80211_tx_queue_params *params)
1737 {
1738         struct ath_wiphy *aphy = hw->priv;
1739         struct ath_softc *sc = aphy->sc;
1740         struct ath_common *common = ath9k_hw_common(sc->sc_ah);
1741         struct ath_txq *txq;
1742         struct ath9k_tx_queue_info qi;
1743         int ret = 0;
1744
1745         if (queue >= WME_NUM_AC)
1746                 return 0;
1747
1748         txq = sc->tx.txq_map[queue];
1749
1750         mutex_lock(&sc->mutex);
1751
1752         memset(&qi, 0, sizeof(struct ath9k_tx_queue_info));
1753
1754         qi.tqi_aifs = params->aifs;
1755         qi.tqi_cwmin = params->cw_min;
1756         qi.tqi_cwmax = params->cw_max;
1757         qi.tqi_burstTime = params->txop;
1758
1759         ath_dbg(common, ATH_DBG_CONFIG,
1760                 "Configure tx [queue/halq] [%d/%d], aifs: %d, cw_min: %d, cw_max: %d, txop: %d\n",
1761                 queue, txq->axq_qnum, params->aifs, params->cw_min,
1762                 params->cw_max, params->txop);
1763
1764         ret = ath_txq_update(sc, txq->axq_qnum, &qi);
1765         if (ret)
1766                 ath_err(common, "TXQ Update failed\n");
1767
1768         if (sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC)
1769                 if (queue == WME_AC_BE && !ret)
1770                         ath_beaconq_config(sc);
1771
1772         mutex_unlock(&sc->mutex);
1773
1774         return ret;
1775 }
1776
1777 static int ath9k_set_key(struct ieee80211_hw *hw,
1778                          enum set_key_cmd cmd,
1779                          struct ieee80211_vif *vif,
1780                          struct ieee80211_sta *sta,
1781                          struct ieee80211_key_conf *key)
1782 {
1783         struct ath_wiphy *aphy = hw->priv;
1784         struct ath_softc *sc = aphy->sc;
1785         struct ath_common *common = ath9k_hw_common(sc->sc_ah);
1786         int ret = 0;
1787
1788         if (modparam_nohwcrypt)
1789                 return -ENOSPC;
1790
1791         mutex_lock(&sc->mutex);
1792         ath9k_ps_wakeup(sc);
1793         ath_dbg(common, ATH_DBG_CONFIG, "Set HW Key\n");
1794
1795         switch (cmd) {
1796         case SET_KEY:
1797                 ret = ath_key_config(common, vif, sta, key);
1798                 if (ret >= 0) {
1799                         key->hw_key_idx = ret;
1800                         /* push IV and Michael MIC generation to stack */
1801                         key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
1802                         if (key->cipher == WLAN_CIPHER_SUITE_TKIP)
1803                                 key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
1804                         if (sc->sc_ah->sw_mgmt_crypto &&
1805                             key->cipher == WLAN_CIPHER_SUITE_CCMP)
1806                                 key->flags |= IEEE80211_KEY_FLAG_SW_MGMT;
1807                         ret = 0;
1808                 }
1809                 break;
1810         case DISABLE_KEY:
1811                 ath_key_delete(common, key);
1812                 break;
1813         default:
1814                 ret = -EINVAL;
1815         }
1816
1817         ath9k_ps_restore(sc);
1818         mutex_unlock(&sc->mutex);
1819
1820         return ret;
1821 }
1822
1823 static void ath9k_bss_info_changed(struct ieee80211_hw *hw,
1824                                    struct ieee80211_vif *vif,
1825                                    struct ieee80211_bss_conf *bss_conf,
1826                                    u32 changed)
1827 {
1828         struct ath_wiphy *aphy = hw->priv;
1829         struct ath_softc *sc = aphy->sc;
1830         struct ath_hw *ah = sc->sc_ah;
1831         struct ath_common *common = ath9k_hw_common(ah);
1832         struct ath_vif *avp = (void *)vif->drv_priv;
1833         int slottime;
1834         int error;
1835
1836         mutex_lock(&sc->mutex);
1837
1838         if (changed & BSS_CHANGED_BSSID) {
1839                 /* Set BSSID */
1840                 memcpy(common->curbssid, bss_conf->bssid, ETH_ALEN);
1841                 memcpy(avp->bssid, bss_conf->bssid, ETH_ALEN);
1842                 common->curaid = 0;
1843                 ath9k_hw_write_associd(ah);
1844
1845                 /* Set aggregation protection mode parameters */
1846                 sc->config.ath_aggr_prot = 0;
1847
1848                 /* Only legacy IBSS for now */
1849                 if (vif->type == NL80211_IFTYPE_ADHOC)
1850                         ath_update_chainmask(sc, 0);
1851
1852                 ath_dbg(common, ATH_DBG_CONFIG, "BSSID: %pM aid: 0x%x\n",
1853                         common->curbssid, common->curaid);
1854
1855                 /* need to reconfigure the beacon */
1856                 sc->sc_flags &= ~SC_OP_BEACONS ;
1857         }
1858
1859         /* Enable transmission of beacons (AP, IBSS, MESH) */
1860         if ((changed & BSS_CHANGED_BEACON) ||
1861             ((changed & BSS_CHANGED_BEACON_ENABLED) && bss_conf->enable_beacon)) {
1862                 ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
1863                 error = ath_beacon_alloc(aphy, vif);
1864                 if (!error)
1865                         ath_beacon_config(sc, vif);
1866         }
1867
1868         if (changed & BSS_CHANGED_ERP_SLOT) {
1869                 if (bss_conf->use_short_slot)
1870                         slottime = 9;
1871                 else
1872                         slottime = 20;
1873                 if (vif->type == NL80211_IFTYPE_AP) {
1874                         /*
1875                          * Defer update, so that connected stations can adjust
1876                          * their settings at the same time.
1877                          * See beacon.c for more details
1878                          */
1879                         sc->beacon.slottime = slottime;
1880                         sc->beacon.updateslot = UPDATE;
1881                 } else {
1882                         ah->slottime = slottime;
1883                         ath9k_hw_init_global_settings(ah);
1884                 }
1885         }
1886
1887         /* Disable transmission of beacons */
1888         if ((changed & BSS_CHANGED_BEACON_ENABLED) && !bss_conf->enable_beacon)
1889                 ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
1890
1891         if (changed & BSS_CHANGED_BEACON_INT) {
1892                 sc->beacon_interval = bss_conf->beacon_int;
1893                 /*
1894                  * In case of AP mode, the HW TSF has to be reset
1895                  * when the beacon interval changes.
1896                  */
1897                 if (vif->type == NL80211_IFTYPE_AP) {
1898                         sc->sc_flags |= SC_OP_TSF_RESET;
1899                         ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
1900                         error = ath_beacon_alloc(aphy, vif);
1901                         if (!error)
1902                                 ath_beacon_config(sc, vif);
1903                 } else {
1904                         ath_beacon_config(sc, vif);
1905                 }
1906         }
1907
1908         if (changed & BSS_CHANGED_ERP_PREAMBLE) {
1909                 ath_dbg(common, ATH_DBG_CONFIG, "BSS Changed PREAMBLE %d\n",
1910                         bss_conf->use_short_preamble);
1911                 if (bss_conf->use_short_preamble)
1912                         sc->sc_flags |= SC_OP_PREAMBLE_SHORT;
1913                 else
1914                         sc->sc_flags &= ~SC_OP_PREAMBLE_SHORT;
1915         }
1916
1917         if (changed & BSS_CHANGED_ERP_CTS_PROT) {
1918                 ath_dbg(common, ATH_DBG_CONFIG, "BSS Changed CTS PROT %d\n",
1919                         bss_conf->use_cts_prot);
1920                 if (bss_conf->use_cts_prot &&
1921                     hw->conf.channel->band != IEEE80211_BAND_5GHZ)
1922                         sc->sc_flags |= SC_OP_PROTECT_ENABLE;
1923                 else
1924                         sc->sc_flags &= ~SC_OP_PROTECT_ENABLE;
1925         }
1926
1927         if (changed & BSS_CHANGED_ASSOC) {
1928                 ath_dbg(common, ATH_DBG_CONFIG, "BSS Changed ASSOC %d\n",
1929                         bss_conf->assoc);
1930                 ath9k_bss_assoc_info(sc, hw, vif, bss_conf);
1931         }
1932
1933         mutex_unlock(&sc->mutex);
1934 }
1935
1936 static u64 ath9k_get_tsf(struct ieee80211_hw *hw)
1937 {
1938         u64 tsf;
1939         struct ath_wiphy *aphy = hw->priv;
1940         struct ath_softc *sc = aphy->sc;
1941
1942         mutex_lock(&sc->mutex);
1943         tsf = ath9k_hw_gettsf64(sc->sc_ah);
1944         mutex_unlock(&sc->mutex);
1945
1946         return tsf;
1947 }
1948
1949 static void ath9k_set_tsf(struct ieee80211_hw *hw, u64 tsf)
1950 {
1951         struct ath_wiphy *aphy = hw->priv;
1952         struct ath_softc *sc = aphy->sc;
1953
1954         mutex_lock(&sc->mutex);
1955         ath9k_hw_settsf64(sc->sc_ah, tsf);
1956         mutex_unlock(&sc->mutex);
1957 }
1958
1959 static void ath9k_reset_tsf(struct ieee80211_hw *hw)
1960 {
1961         struct ath_wiphy *aphy = hw->priv;
1962         struct ath_softc *sc = aphy->sc;
1963
1964         mutex_lock(&sc->mutex);
1965
1966         ath9k_ps_wakeup(sc);
1967         ath9k_hw_reset_tsf(sc->sc_ah);
1968         ath9k_ps_restore(sc);
1969
1970         mutex_unlock(&sc->mutex);
1971 }
1972
1973 static int ath9k_ampdu_action(struct ieee80211_hw *hw,
1974                               struct ieee80211_vif *vif,
1975                               enum ieee80211_ampdu_mlme_action action,
1976                               struct ieee80211_sta *sta,
1977                               u16 tid, u16 *ssn)
1978 {
1979         struct ath_wiphy *aphy = hw->priv;
1980         struct ath_softc *sc = aphy->sc;
1981         int ret = 0;
1982
1983         local_bh_disable();
1984
1985         switch (action) {
1986         case IEEE80211_AMPDU_RX_START:
1987                 if (!(sc->sc_flags & SC_OP_RXAGGR))
1988                         ret = -ENOTSUPP;
1989                 break;
1990         case IEEE80211_AMPDU_RX_STOP:
1991                 break;
1992         case IEEE80211_AMPDU_TX_START:
1993                 if (!(sc->sc_flags & SC_OP_TXAGGR))
1994                         return -EOPNOTSUPP;
1995
1996                 ath9k_ps_wakeup(sc);
1997                 ret = ath_tx_aggr_start(sc, sta, tid, ssn);
1998                 if (!ret)
1999                         ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid);
2000                 ath9k_ps_restore(sc);
2001                 break;
2002         case IEEE80211_AMPDU_TX_STOP:
2003                 ath9k_ps_wakeup(sc);
2004                 ath_tx_aggr_stop(sc, sta, tid);
2005                 ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid);
2006                 ath9k_ps_restore(sc);
2007                 break;
2008         case IEEE80211_AMPDU_TX_OPERATIONAL:
2009                 ath9k_ps_wakeup(sc);
2010                 ath_tx_aggr_resume(sc, sta, tid);
2011                 ath9k_ps_restore(sc);
2012                 break;
2013         default:
2014                 ath_err(ath9k_hw_common(sc->sc_ah), "Unknown AMPDU action\n");
2015         }
2016
2017         local_bh_enable();
2018
2019         return ret;
2020 }
2021
2022 static int ath9k_get_survey(struct ieee80211_hw *hw, int idx,
2023                              struct survey_info *survey)
2024 {
2025         struct ath_wiphy *aphy = hw->priv;
2026         struct ath_softc *sc = aphy->sc;
2027         struct ath_common *common = ath9k_hw_common(sc->sc_ah);
2028         struct ieee80211_supported_band *sband;
2029         struct ieee80211_channel *chan;
2030         unsigned long flags;
2031         int pos;
2032
2033         spin_lock_irqsave(&common->cc_lock, flags);
2034         if (idx == 0)
2035                 ath_update_survey_stats(sc);
2036
2037         sband = hw->wiphy->bands[IEEE80211_BAND_2GHZ];
2038         if (sband && idx >= sband->n_channels) {
2039                 idx -= sband->n_channels;
2040                 sband = NULL;
2041         }
2042
2043         if (!sband)
2044                 sband = hw->wiphy->bands[IEEE80211_BAND_5GHZ];
2045
2046         if (!sband || idx >= sband->n_channels) {
2047                 spin_unlock_irqrestore(&common->cc_lock, flags);
2048                 return -ENOENT;
2049         }
2050
2051         chan = &sband->channels[idx];
2052         pos = chan->hw_value;
2053         memcpy(survey, &sc->survey[pos], sizeof(*survey));
2054         survey->channel = chan;
2055         spin_unlock_irqrestore(&common->cc_lock, flags);
2056
2057         return 0;
2058 }
2059
2060 static void ath9k_sw_scan_start(struct ieee80211_hw *hw)
2061 {
2062         struct ath_wiphy *aphy = hw->priv;
2063         struct ath_softc *sc = aphy->sc;
2064
2065         mutex_lock(&sc->mutex);
2066         if (ath9k_wiphy_scanning(sc)) {
2067                 /*
2068                  * There is a race here in mac80211 but fixing it requires
2069                  * we revisit how we handle the scan complete callback.
2070                  * After mac80211 fixes we will not have configured hardware
2071                  * to the home channel nor would we have configured the RX
2072                  * filter yet.
2073                  */
2074                 mutex_unlock(&sc->mutex);
2075                 return;
2076         }
2077
2078         aphy->state = ATH_WIPHY_SCAN;
2079         ath9k_wiphy_pause_all_forced(sc, aphy);
2080         mutex_unlock(&sc->mutex);
2081 }
2082
2083 /*
2084  * XXX: this requires a revisit after the driver
2085  * scan_complete gets moved to another place/removed in mac80211.
2086  */
2087 static void ath9k_sw_scan_complete(struct ieee80211_hw *hw)
2088 {
2089         struct ath_wiphy *aphy = hw->priv;
2090         struct ath_softc *sc = aphy->sc;
2091
2092         mutex_lock(&sc->mutex);
2093         aphy->state = ATH_WIPHY_ACTIVE;
2094         mutex_unlock(&sc->mutex);
2095 }
2096
2097 static void ath9k_set_coverage_class(struct ieee80211_hw *hw, u8 coverage_class)
2098 {
2099         struct ath_wiphy *aphy = hw->priv;
2100         struct ath_softc *sc = aphy->sc;
2101         struct ath_hw *ah = sc->sc_ah;
2102
2103         mutex_lock(&sc->mutex);
2104         ah->coverage_class = coverage_class;
2105         ath9k_hw_init_global_settings(ah);
2106         mutex_unlock(&sc->mutex);
2107 }
2108
2109 struct ieee80211_ops ath9k_ops = {
2110         .tx                 = ath9k_tx,
2111         .start              = ath9k_start,
2112         .stop               = ath9k_stop,
2113         .add_interface      = ath9k_add_interface,
2114         .remove_interface   = ath9k_remove_interface,
2115         .config             = ath9k_config,
2116         .configure_filter   = ath9k_configure_filter,
2117         .sta_add            = ath9k_sta_add,
2118         .sta_remove         = ath9k_sta_remove,
2119         .conf_tx            = ath9k_conf_tx,
2120         .bss_info_changed   = ath9k_bss_info_changed,
2121         .set_key            = ath9k_set_key,
2122         .get_tsf            = ath9k_get_tsf,
2123         .set_tsf            = ath9k_set_tsf,
2124         .reset_tsf          = ath9k_reset_tsf,
2125         .ampdu_action       = ath9k_ampdu_action,
2126         .get_survey         = ath9k_get_survey,
2127         .sw_scan_start      = ath9k_sw_scan_start,
2128         .sw_scan_complete   = ath9k_sw_scan_complete,
2129         .rfkill_poll        = ath9k_rfkill_poll_state,
2130         .set_coverage_class = ath9k_set_coverage_class,
2131 };