]> git.openfabrics.org - ~shefty/rdma-dev.git/blob - drivers/net/wireless/mwifiex/scan.c
9189a32b7844b713815636d03517e7532da31f94
[~shefty/rdma-dev.git] / drivers / net / wireless / mwifiex / scan.c
1 /*
2  * Marvell Wireless LAN device driver: scan ioctl and command handling
3  *
4  * Copyright (C) 2011, Marvell International Ltd.
5  *
6  * This software file (the "File") is distributed by Marvell International
7  * Ltd. under the terms of the GNU General Public License Version 2, June 1991
8  * (the "License").  You may use, redistribute and/or modify this File in
9  * accordance with the terms and conditions of the License, a copy of which
10  * is available by writing to the Free Software Foundation, Inc.,
11  * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
12  * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
13  *
14  * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
15  * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
16  * ARE EXPRESSLY DISCLAIMED.  The License provides additional details about
17  * this warranty disclaimer.
18  */
19
20 #include "decl.h"
21 #include "ioctl.h"
22 #include "util.h"
23 #include "fw.h"
24 #include "main.h"
25 #include "11n.h"
26 #include "cfg80211.h"
27
28 /* The maximum number of channels the firmware can scan per command */
29 #define MWIFIEX_MAX_CHANNELS_PER_SPECIFIC_SCAN   14
30
31 #define MWIFIEX_DEF_CHANNELS_PER_SCAN_CMD       4
32 #define MWIFIEX_LIMIT_1_CHANNEL_PER_SCAN_CMD    15
33 #define MWIFIEX_LIMIT_2_CHANNELS_PER_SCAN_CMD   27
34 #define MWIFIEX_LIMIT_3_CHANNELS_PER_SCAN_CMD   35
35
36 /* Memory needed to store a max sized Channel List TLV for a firmware scan */
37 #define CHAN_TLV_MAX_SIZE  (sizeof(struct mwifiex_ie_types_header)         \
38                                 + (MWIFIEX_MAX_CHANNELS_PER_SPECIFIC_SCAN     \
39                                 *sizeof(struct mwifiex_chan_scan_param_set)))
40
41 /* Memory needed to store supported rate */
42 #define RATE_TLV_MAX_SIZE   (sizeof(struct mwifiex_ie_types_rates_param_set) \
43                                 + HOSTCMD_SUPPORTED_RATES)
44
45 /* Memory needed to store a max number/size WildCard SSID TLV for a firmware
46         scan */
47 #define WILDCARD_SSID_TLV_MAX_SIZE  \
48         (MWIFIEX_MAX_SSID_LIST_LENGTH *                                 \
49                 (sizeof(struct mwifiex_ie_types_wildcard_ssid_params)   \
50                         + IEEE80211_MAX_SSID_LEN))
51
52 /* Maximum memory needed for a mwifiex_scan_cmd_config with all TLVs at max */
53 #define MAX_SCAN_CFG_ALLOC (sizeof(struct mwifiex_scan_cmd_config)        \
54                                 + sizeof(struct mwifiex_ie_types_num_probes)   \
55                                 + sizeof(struct mwifiex_ie_types_htcap)       \
56                                 + CHAN_TLV_MAX_SIZE                 \
57                                 + RATE_TLV_MAX_SIZE                 \
58                                 + WILDCARD_SSID_TLV_MAX_SIZE)
59
60
61 union mwifiex_scan_cmd_config_tlv {
62         /* Scan configuration (variable length) */
63         struct mwifiex_scan_cmd_config config;
64         /* Max allocated block */
65         u8 config_alloc_buf[MAX_SCAN_CFG_ALLOC];
66 };
67
68 enum cipher_suite {
69         CIPHER_SUITE_TKIP,
70         CIPHER_SUITE_CCMP,
71         CIPHER_SUITE_MAX
72 };
73 static u8 mwifiex_wpa_oui[CIPHER_SUITE_MAX][4] = {
74         { 0x00, 0x50, 0xf2, 0x02 },     /* TKIP */
75         { 0x00, 0x50, 0xf2, 0x04 },     /* AES  */
76 };
77 static u8 mwifiex_rsn_oui[CIPHER_SUITE_MAX][4] = {
78         { 0x00, 0x0f, 0xac, 0x02 },     /* TKIP */
79         { 0x00, 0x0f, 0xac, 0x04 },     /* AES  */
80 };
81
82 /*
83  * This function parses a given IE for a given OUI.
84  *
85  * This is used to parse a WPA/RSN IE to find if it has
86  * a given oui in PTK.
87  */
88 static u8
89 mwifiex_search_oui_in_ie(struct ie_body *iebody, u8 *oui)
90 {
91         u8 count;
92
93         count = iebody->ptk_cnt[0];
94
95         /* There could be multiple OUIs for PTK hence
96            1) Take the length.
97            2) Check all the OUIs for AES.
98            3) If one of them is AES then pass success. */
99         while (count) {
100                 if (!memcmp(iebody->ptk_body, oui, sizeof(iebody->ptk_body)))
101                         return MWIFIEX_OUI_PRESENT;
102
103                 --count;
104                 if (count)
105                         iebody = (struct ie_body *) ((u8 *) iebody +
106                                                 sizeof(iebody->ptk_body));
107         }
108
109         pr_debug("info: %s: OUI is not found in PTK\n", __func__);
110         return MWIFIEX_OUI_NOT_PRESENT;
111 }
112
113 /*
114  * This function checks if a given OUI is present in a RSN IE.
115  *
116  * The function first checks if a RSN IE is present or not in the
117  * BSS descriptor. It tries to locate the OUI only if such an IE is
118  * present.
119  */
120 static u8
121 mwifiex_is_rsn_oui_present(struct mwifiex_bssdescriptor *bss_desc, u32 cipher)
122 {
123         u8 *oui;
124         struct ie_body *iebody;
125         u8 ret = MWIFIEX_OUI_NOT_PRESENT;
126
127         if (((bss_desc->bcn_rsn_ie) && ((*(bss_desc->bcn_rsn_ie)).
128                                         ieee_hdr.element_id == WLAN_EID_RSN))) {
129                 iebody = (struct ie_body *)
130                          (((u8 *) bss_desc->bcn_rsn_ie->data) +
131                           RSN_GTK_OUI_OFFSET);
132                 oui = &mwifiex_rsn_oui[cipher][0];
133                 ret = mwifiex_search_oui_in_ie(iebody, oui);
134                 if (ret)
135                         return ret;
136         }
137         return ret;
138 }
139
140 /*
141  * This function checks if a given OUI is present in a WPA IE.
142  *
143  * The function first checks if a WPA IE is present or not in the
144  * BSS descriptor. It tries to locate the OUI only if such an IE is
145  * present.
146  */
147 static u8
148 mwifiex_is_wpa_oui_present(struct mwifiex_bssdescriptor *bss_desc, u32 cipher)
149 {
150         u8 *oui;
151         struct ie_body *iebody;
152         u8 ret = MWIFIEX_OUI_NOT_PRESENT;
153
154         if (((bss_desc->bcn_wpa_ie) &&
155              ((*(bss_desc->bcn_wpa_ie)).vend_hdr.element_id ==
156               WLAN_EID_VENDOR_SPECIFIC))) {
157                 iebody = (struct ie_body *) bss_desc->bcn_wpa_ie->data;
158                 oui = &mwifiex_wpa_oui[cipher][0];
159                 ret = mwifiex_search_oui_in_ie(iebody, oui);
160                 if (ret)
161                         return ret;
162         }
163         return ret;
164 }
165
166 /*
167  * This function compares two SSIDs and checks if they match.
168  */
169 s32
170 mwifiex_ssid_cmp(struct cfg80211_ssid *ssid1, struct cfg80211_ssid *ssid2)
171 {
172         if (!ssid1 || !ssid2 || (ssid1->ssid_len != ssid2->ssid_len))
173                 return -1;
174         return memcmp(ssid1->ssid, ssid2->ssid, ssid1->ssid_len);
175 }
176
177 /*
178  * This function checks if wapi is enabled in driver and scanned network is
179  * compatible with it.
180  */
181 static bool
182 mwifiex_is_bss_wapi(struct mwifiex_private *priv,
183                     struct mwifiex_bssdescriptor *bss_desc)
184 {
185         if (priv->sec_info.wapi_enabled &&
186             (bss_desc->bcn_wapi_ie &&
187              ((*(bss_desc->bcn_wapi_ie)).ieee_hdr.element_id ==
188                         WLAN_EID_BSS_AC_ACCESS_DELAY))) {
189                 return true;
190         }
191         return false;
192 }
193
194 /*
195  * This function checks if driver is configured with no security mode and
196  * scanned network is compatible with it.
197  */
198 static bool
199 mwifiex_is_bss_no_sec(struct mwifiex_private *priv,
200                       struct mwifiex_bssdescriptor *bss_desc)
201 {
202         if (!priv->sec_info.wep_enabled && !priv->sec_info.wpa_enabled &&
203             !priv->sec_info.wpa2_enabled && ((!bss_desc->bcn_wpa_ie) ||
204                 ((*(bss_desc->bcn_wpa_ie)).vend_hdr.element_id !=
205                  WLAN_EID_VENDOR_SPECIFIC)) &&
206             ((!bss_desc->bcn_rsn_ie) ||
207                 ((*(bss_desc->bcn_rsn_ie)).ieee_hdr.element_id !=
208                  WLAN_EID_RSN)) &&
209             !priv->sec_info.encryption_mode && !bss_desc->privacy) {
210                 return true;
211         }
212         return false;
213 }
214
215 /*
216  * This function checks if static WEP is enabled in driver and scanned network
217  * is compatible with it.
218  */
219 static bool
220 mwifiex_is_bss_static_wep(struct mwifiex_private *priv,
221                           struct mwifiex_bssdescriptor *bss_desc)
222 {
223         if (priv->sec_info.wep_enabled && !priv->sec_info.wpa_enabled &&
224             !priv->sec_info.wpa2_enabled && bss_desc->privacy) {
225                 return true;
226         }
227         return false;
228 }
229
230 /*
231  * This function checks if wpa is enabled in driver and scanned network is
232  * compatible with it.
233  */
234 static bool
235 mwifiex_is_bss_wpa(struct mwifiex_private *priv,
236                    struct mwifiex_bssdescriptor *bss_desc)
237 {
238         if (!priv->sec_info.wep_enabled && priv->sec_info.wpa_enabled &&
239             !priv->sec_info.wpa2_enabled && ((bss_desc->bcn_wpa_ie) &&
240             ((*(bss_desc->bcn_wpa_ie)).
241              vend_hdr.element_id == WLAN_EID_VENDOR_SPECIFIC))
242            /*
243             * Privacy bit may NOT be set in some APs like
244             * LinkSys WRT54G && bss_desc->privacy
245             */
246          ) {
247                 dev_dbg(priv->adapter->dev, "info: %s: WPA:"
248                         " wpa_ie=%#x wpa2_ie=%#x WEP=%s WPA=%s WPA2=%s "
249                         "EncMode=%#x privacy=%#x\n", __func__,
250                         (bss_desc->bcn_wpa_ie) ?
251                         (*(bss_desc->bcn_wpa_ie)).
252                         vend_hdr.element_id : 0,
253                         (bss_desc->bcn_rsn_ie) ?
254                         (*(bss_desc->bcn_rsn_ie)).
255                         ieee_hdr.element_id : 0,
256                         (priv->sec_info.wep_enabled) ? "e" : "d",
257                         (priv->sec_info.wpa_enabled) ? "e" : "d",
258                         (priv->sec_info.wpa2_enabled) ? "e" : "d",
259                         priv->sec_info.encryption_mode,
260                         bss_desc->privacy);
261                 return true;
262         }
263         return false;
264 }
265
266 /*
267  * This function checks if wpa2 is enabled in driver and scanned network is
268  * compatible with it.
269  */
270 static bool
271 mwifiex_is_bss_wpa2(struct mwifiex_private *priv,
272                     struct mwifiex_bssdescriptor *bss_desc)
273 {
274         if (!priv->sec_info.wep_enabled &&
275             !priv->sec_info.wpa_enabled &&
276             priv->sec_info.wpa2_enabled &&
277             ((bss_desc->bcn_rsn_ie) &&
278              ((*(bss_desc->bcn_rsn_ie)).ieee_hdr.element_id == WLAN_EID_RSN))) {
279                 /*
280                  * Privacy bit may NOT be set in some APs like
281                  * LinkSys WRT54G && bss_desc->privacy
282                  */
283                 dev_dbg(priv->adapter->dev, "info: %s: WPA2: "
284                         " wpa_ie=%#x wpa2_ie=%#x WEP=%s WPA=%s WPA2=%s "
285                         "EncMode=%#x privacy=%#x\n", __func__,
286                         (bss_desc->bcn_wpa_ie) ?
287                         (*(bss_desc->bcn_wpa_ie)).
288                         vend_hdr.element_id : 0,
289                         (bss_desc->bcn_rsn_ie) ?
290                         (*(bss_desc->bcn_rsn_ie)).
291                         ieee_hdr.element_id : 0,
292                         (priv->sec_info.wep_enabled) ? "e" : "d",
293                         (priv->sec_info.wpa_enabled) ? "e" : "d",
294                         (priv->sec_info.wpa2_enabled) ? "e" : "d",
295                         priv->sec_info.encryption_mode,
296                         bss_desc->privacy);
297                 return true;
298         }
299         return false;
300 }
301
302 /*
303  * This function checks if adhoc AES is enabled in driver and scanned network is
304  * compatible with it.
305  */
306 static bool
307 mwifiex_is_bss_adhoc_aes(struct mwifiex_private *priv,
308                          struct mwifiex_bssdescriptor *bss_desc)
309 {
310         if (!priv->sec_info.wep_enabled && !priv->sec_info.wpa_enabled &&
311             !priv->sec_info.wpa2_enabled &&
312             ((!bss_desc->bcn_wpa_ie) ||
313              ((*(bss_desc->bcn_wpa_ie)).
314               vend_hdr.element_id != WLAN_EID_VENDOR_SPECIFIC)) &&
315             ((!bss_desc->bcn_rsn_ie) ||
316              ((*(bss_desc->bcn_rsn_ie)).ieee_hdr.element_id != WLAN_EID_RSN)) &&
317             !priv->sec_info.encryption_mode && bss_desc->privacy) {
318                 return true;
319         }
320         return false;
321 }
322
323 /*
324  * This function checks if dynamic WEP is enabled in driver and scanned network
325  * is compatible with it.
326  */
327 static bool
328 mwifiex_is_bss_dynamic_wep(struct mwifiex_private *priv,
329                            struct mwifiex_bssdescriptor *bss_desc)
330 {
331         if (!priv->sec_info.wep_enabled && !priv->sec_info.wpa_enabled &&
332             !priv->sec_info.wpa2_enabled &&
333             ((!bss_desc->bcn_wpa_ie) ||
334              ((*(bss_desc->bcn_wpa_ie)).
335               vend_hdr.element_id != WLAN_EID_VENDOR_SPECIFIC)) &&
336             ((!bss_desc->bcn_rsn_ie) ||
337              ((*(bss_desc->bcn_rsn_ie)).ieee_hdr.element_id != WLAN_EID_RSN)) &&
338             priv->sec_info.encryption_mode && bss_desc->privacy) {
339                 dev_dbg(priv->adapter->dev, "info: %s: dynamic "
340                         "WEP: wpa_ie=%#x wpa2_ie=%#x "
341                         "EncMode=%#x privacy=%#x\n",
342                         __func__,
343                         (bss_desc->bcn_wpa_ie) ?
344                         (*(bss_desc->bcn_wpa_ie)).
345                         vend_hdr.element_id : 0,
346                         (bss_desc->bcn_rsn_ie) ?
347                         (*(bss_desc->bcn_rsn_ie)).
348                         ieee_hdr.element_id : 0,
349                         priv->sec_info.encryption_mode,
350                         bss_desc->privacy);
351                 return true;
352         }
353         return false;
354 }
355
356 /*
357  * This function checks if a scanned network is compatible with the driver
358  * settings.
359  *
360  *   WEP     WPA    WPA2   ad-hoc encrypt                  Network
361  * enabled enabled enabled  AES    mode   Privacy WPA WPA2 Compatible
362  *    0       0       0      0     NONE      0     0   0   yes No security
363  *    0       1       0      0      x        1x    1   x   yes WPA (disable
364  *                                                         HT if no AES)
365  *    0       0       1      0      x        1x    x   1   yes WPA2 (disable
366  *                                                         HT if no AES)
367  *    0       0       0      1     NONE      1     0   0   yes Ad-hoc AES
368  *    1       0       0      0     NONE      1     0   0   yes Static WEP
369  *                                                         (disable HT)
370  *    0       0       0      0    !=NONE     1     0   0   yes Dynamic WEP
371  *
372  * Compatibility is not matched while roaming, except for mode.
373  */
374 static s32
375 mwifiex_is_network_compatible(struct mwifiex_private *priv,
376                               struct mwifiex_bssdescriptor *bss_desc, u32 mode)
377 {
378         struct mwifiex_adapter *adapter = priv->adapter;
379
380         bss_desc->disable_11n = false;
381
382         /* Don't check for compatibility if roaming */
383         if (priv->media_connected &&
384             (priv->bss_mode == NL80211_IFTYPE_STATION) &&
385             (bss_desc->bss_mode == NL80211_IFTYPE_STATION))
386                 return 0;
387
388         if (priv->wps.session_enable) {
389                 dev_dbg(adapter->dev,
390                         "info: return success directly in WPS period\n");
391                 return 0;
392         }
393
394         if (mwifiex_is_bss_wapi(priv, bss_desc)) {
395                 dev_dbg(adapter->dev, "info: return success for WAPI AP\n");
396                 return 0;
397         }
398
399         if (bss_desc->bss_mode == mode) {
400                 if (mwifiex_is_bss_no_sec(priv, bss_desc)) {
401                         /* No security */
402                         return 0;
403                 } else if (mwifiex_is_bss_static_wep(priv, bss_desc)) {
404                         /* Static WEP enabled */
405                         dev_dbg(adapter->dev, "info: Disable 11n in WEP mode.\n");
406                         bss_desc->disable_11n = true;
407                         return 0;
408                 } else if (mwifiex_is_bss_wpa(priv, bss_desc)) {
409                         /* WPA enabled */
410                         if (((priv->adapter->config_bands & BAND_GN ||
411                               priv->adapter->config_bands & BAND_AN) &&
412                              bss_desc->bcn_ht_cap) &&
413                             !mwifiex_is_wpa_oui_present(bss_desc,
414                                                          CIPHER_SUITE_CCMP)) {
415
416                                 if (mwifiex_is_wpa_oui_present
417                                                 (bss_desc, CIPHER_SUITE_TKIP)) {
418                                         dev_dbg(adapter->dev,
419                                                 "info: Disable 11n if AES "
420                                                 "is not supported by AP\n");
421                                         bss_desc->disable_11n = true;
422                                 } else {
423                                         return -1;
424                                 }
425                         }
426                         return 0;
427                 } else if (mwifiex_is_bss_wpa2(priv, bss_desc)) {
428                         /* WPA2 enabled */
429                         if (((priv->adapter->config_bands & BAND_GN ||
430                               priv->adapter->config_bands & BAND_AN) &&
431                              bss_desc->bcn_ht_cap) &&
432                             !mwifiex_is_rsn_oui_present(bss_desc,
433                                                         CIPHER_SUITE_CCMP)) {
434
435                                 if (mwifiex_is_rsn_oui_present
436                                                 (bss_desc, CIPHER_SUITE_TKIP)) {
437                                         dev_dbg(adapter->dev,
438                                                 "info: Disable 11n if AES "
439                                                 "is not supported by AP\n");
440                                         bss_desc->disable_11n = true;
441                                 } else {
442                                         return -1;
443                                 }
444                         }
445                         return 0;
446                 } else if (mwifiex_is_bss_adhoc_aes(priv, bss_desc)) {
447                         /* Ad-hoc AES enabled */
448                         return 0;
449                 } else if (mwifiex_is_bss_dynamic_wep(priv, bss_desc)) {
450                         /* Dynamic WEP enabled */
451                         return 0;
452                 }
453
454                 /* Security doesn't match */
455                 dev_dbg(adapter->dev,
456                         "info: %s: failed: wpa_ie=%#x wpa2_ie=%#x WEP=%s "
457                         "WPA=%s WPA2=%s EncMode=%#x privacy=%#x\n", __func__,
458                         (bss_desc->bcn_wpa_ie) ?
459                         (*(bss_desc->bcn_wpa_ie)).vend_hdr.element_id : 0,
460                         (bss_desc->bcn_rsn_ie) ?
461                         (*(bss_desc->bcn_rsn_ie)).ieee_hdr.element_id : 0,
462                         (priv->sec_info.wep_enabled) ? "e" : "d",
463                         (priv->sec_info.wpa_enabled) ? "e" : "d",
464                         (priv->sec_info.wpa2_enabled) ? "e" : "d",
465                         priv->sec_info.encryption_mode, bss_desc->privacy);
466                 return -1;
467         }
468
469         /* Mode doesn't match */
470         return -1;
471 }
472
473 /*
474  * This function creates a channel list for the driver to scan, based
475  * on region/band information.
476  *
477  * This routine is used for any scan that is not provided with a
478  * specific channel list to scan.
479  */
480 static int
481 mwifiex_scan_create_channel_list(struct mwifiex_private *priv,
482                                  const struct mwifiex_user_scan_cfg
483                                                         *user_scan_in,
484                                  struct mwifiex_chan_scan_param_set
485                                                         *scan_chan_list,
486                                  u8 filtered_scan)
487 {
488         enum ieee80211_band band;
489         struct ieee80211_supported_band *sband;
490         struct ieee80211_channel *ch;
491         struct mwifiex_adapter *adapter = priv->adapter;
492         int chan_idx = 0, i;
493
494         for (band = 0; (band < IEEE80211_NUM_BANDS) ; band++) {
495
496                 if (!priv->wdev->wiphy->bands[band])
497                         continue;
498
499                 sband = priv->wdev->wiphy->bands[band];
500
501                 for (i = 0; (i < sband->n_channels) ; i++) {
502                         ch = &sband->channels[i];
503                         if (ch->flags & IEEE80211_CHAN_DISABLED)
504                                 continue;
505                         scan_chan_list[chan_idx].radio_type = band;
506
507                         if (user_scan_in &&
508                             user_scan_in->chan_list[0].scan_time)
509                                 scan_chan_list[chan_idx].max_scan_time =
510                                         cpu_to_le16((u16) user_scan_in->
511                                         chan_list[0].scan_time);
512                         else if (ch->flags & IEEE80211_CHAN_PASSIVE_SCAN)
513                                 scan_chan_list[chan_idx].max_scan_time =
514                                         cpu_to_le16(adapter->passive_scan_time);
515                         else
516                                 scan_chan_list[chan_idx].max_scan_time =
517                                         cpu_to_le16(adapter->active_scan_time);
518
519                         if (ch->flags & IEEE80211_CHAN_PASSIVE_SCAN)
520                                 scan_chan_list[chan_idx].chan_scan_mode_bitmap
521                                         |= MWIFIEX_PASSIVE_SCAN;
522                         else
523                                 scan_chan_list[chan_idx].chan_scan_mode_bitmap
524                                         &= ~MWIFIEX_PASSIVE_SCAN;
525                         scan_chan_list[chan_idx].chan_number =
526                                                         (u32) ch->hw_value;
527                         if (filtered_scan) {
528                                 scan_chan_list[chan_idx].max_scan_time =
529                                 cpu_to_le16(adapter->specific_scan_time);
530                                 scan_chan_list[chan_idx].chan_scan_mode_bitmap
531                                         |= MWIFIEX_DISABLE_CHAN_FILT;
532                         }
533                         chan_idx++;
534                 }
535
536         }
537         return chan_idx;
538 }
539
540 /*
541  * This function constructs and sends multiple scan config commands to
542  * the firmware.
543  *
544  * Previous routines in the code flow have created a scan command configuration
545  * with any requested TLVs.  This function splits the channel TLV into maximum
546  * channels supported per scan lists and sends the portion of the channel TLV,
547  * along with the other TLVs, to the firmware.
548  */
549 static int
550 mwifiex_scan_channel_list(struct mwifiex_private *priv,
551                           u32 max_chan_per_scan, u8 filtered_scan,
552                           struct mwifiex_scan_cmd_config *scan_cfg_out,
553                           struct mwifiex_ie_types_chan_list_param_set
554                           *chan_tlv_out,
555                           struct mwifiex_chan_scan_param_set *scan_chan_list)
556 {
557         int ret = 0;
558         struct mwifiex_chan_scan_param_set *tmp_chan_list;
559         struct mwifiex_chan_scan_param_set *start_chan;
560
561         u32 tlv_idx;
562         u32 total_scan_time;
563         u32 done_early;
564
565         if (!scan_cfg_out || !chan_tlv_out || !scan_chan_list) {
566                 dev_dbg(priv->adapter->dev,
567                         "info: Scan: Null detect: %p, %p, %p\n",
568                        scan_cfg_out, chan_tlv_out, scan_chan_list);
569                 return -1;
570         }
571
572         chan_tlv_out->header.type = cpu_to_le16(TLV_TYPE_CHANLIST);
573
574         /* Set the temp channel struct pointer to the start of the desired
575            list */
576         tmp_chan_list = scan_chan_list;
577
578         /* Loop through the desired channel list, sending a new firmware scan
579            commands for each max_chan_per_scan channels (or for 1,6,11
580            individually if configured accordingly) */
581         while (tmp_chan_list->chan_number) {
582
583                 tlv_idx = 0;
584                 total_scan_time = 0;
585                 chan_tlv_out->header.len = 0;
586                 start_chan = tmp_chan_list;
587                 done_early = false;
588
589                 /*
590                  * Construct the Channel TLV for the scan command.  Continue to
591                  * insert channel TLVs until:
592                  *   - the tlv_idx hits the maximum configured per scan command
593                  *   - the next channel to insert is 0 (end of desired channel
594                  *     list)
595                  *   - done_early is set (controlling individual scanning of
596                  *     1,6,11)
597                  */
598                 while (tlv_idx < max_chan_per_scan &&
599                        tmp_chan_list->chan_number && !done_early) {
600
601                         dev_dbg(priv->adapter->dev,
602                                 "info: Scan: Chan(%3d), Radio(%d),"
603                                 " Mode(%d, %d), Dur(%d)\n",
604                                 tmp_chan_list->chan_number,
605                                 tmp_chan_list->radio_type,
606                                 tmp_chan_list->chan_scan_mode_bitmap
607                                 & MWIFIEX_PASSIVE_SCAN,
608                                 (tmp_chan_list->chan_scan_mode_bitmap
609                                  & MWIFIEX_DISABLE_CHAN_FILT) >> 1,
610                                 le16_to_cpu(tmp_chan_list->max_scan_time));
611
612                         /* Copy the current channel TLV to the command being
613                            prepared */
614                         memcpy(chan_tlv_out->chan_scan_param + tlv_idx,
615                                tmp_chan_list,
616                                sizeof(chan_tlv_out->chan_scan_param));
617
618                         /* Increment the TLV header length by the size
619                            appended */
620                         le16_add_cpu(&chan_tlv_out->header.len,
621                                      sizeof(chan_tlv_out->chan_scan_param));
622
623                         /*
624                          * The tlv buffer length is set to the number of bytes
625                          * of the between the channel tlv pointer and the start
626                          * of the tlv buffer.  This compensates for any TLVs
627                          * that were appended before the channel list.
628                          */
629                         scan_cfg_out->tlv_buf_len = (u32) ((u8 *) chan_tlv_out -
630                                                         scan_cfg_out->tlv_buf);
631
632                         /* Add the size of the channel tlv header and the data
633                            length */
634                         scan_cfg_out->tlv_buf_len +=
635                                 (sizeof(chan_tlv_out->header)
636                                  + le16_to_cpu(chan_tlv_out->header.len));
637
638                         /* Increment the index to the channel tlv we are
639                            constructing */
640                         tlv_idx++;
641
642                         /* Count the total scan time per command */
643                         total_scan_time +=
644                                 le16_to_cpu(tmp_chan_list->max_scan_time);
645
646                         done_early = false;
647
648                         /* Stop the loop if the *current* channel is in the
649                            1,6,11 set and we are not filtering on a BSSID
650                            or SSID. */
651                         if (!filtered_scan &&
652                             (tmp_chan_list->chan_number == 1 ||
653                              tmp_chan_list->chan_number == 6 ||
654                              tmp_chan_list->chan_number == 11))
655                                 done_early = true;
656
657                         /* Increment the tmp pointer to the next channel to
658                            be scanned */
659                         tmp_chan_list++;
660
661                         /* Stop the loop if the *next* channel is in the 1,6,11
662                            set.  This will cause it to be the only channel
663                            scanned on the next interation */
664                         if (!filtered_scan &&
665                             (tmp_chan_list->chan_number == 1 ||
666                              tmp_chan_list->chan_number == 6 ||
667                              tmp_chan_list->chan_number == 11))
668                                 done_early = true;
669                 }
670
671                 /* The total scan time should be less than scan command timeout
672                    value */
673                 if (total_scan_time > MWIFIEX_MAX_TOTAL_SCAN_TIME) {
674                         dev_err(priv->adapter->dev, "total scan time %dms"
675                                 " is over limit (%dms), scan skipped\n",
676                                 total_scan_time, MWIFIEX_MAX_TOTAL_SCAN_TIME);
677                         ret = -1;
678                         break;
679                 }
680
681                 priv->adapter->scan_channels = start_chan;
682
683                 /* Send the scan command to the firmware with the specified
684                    cfg */
685                 ret = mwifiex_send_cmd_async(priv, HostCmd_CMD_802_11_SCAN,
686                                              HostCmd_ACT_GEN_SET, 0,
687                                              scan_cfg_out);
688                 if (ret)
689                         break;
690         }
691
692         if (ret)
693                 return -1;
694
695         return 0;
696 }
697
698 /*
699  * This function constructs a scan command configuration structure to use
700  * in scan commands.
701  *
702  * Application layer or other functions can invoke network scanning
703  * with a scan configuration supplied in a user scan configuration structure.
704  * This structure is used as the basis of one or many scan command configuration
705  * commands that are sent to the command processing module and eventually to the
706  * firmware.
707  *
708  * This function creates a scan command configuration structure  based on the
709  * following user supplied parameters (if present):
710  *      - SSID filter
711  *      - BSSID filter
712  *      - Number of Probes to be sent
713  *      - Channel list
714  *
715  * If the SSID or BSSID filter is not present, the filter is disabled/cleared.
716  * If the number of probes is not set, adapter default setting is used.
717  */
718 static void
719 mwifiex_config_scan(struct mwifiex_private *priv,
720                     const struct mwifiex_user_scan_cfg *user_scan_in,
721                     struct mwifiex_scan_cmd_config *scan_cfg_out,
722                     struct mwifiex_ie_types_chan_list_param_set **chan_list_out,
723                     struct mwifiex_chan_scan_param_set *scan_chan_list,
724                     u8 *max_chan_per_scan, u8 *filtered_scan,
725                     u8 *scan_current_only)
726 {
727         struct mwifiex_adapter *adapter = priv->adapter;
728         struct mwifiex_ie_types_num_probes *num_probes_tlv;
729         struct mwifiex_ie_types_wildcard_ssid_params *wildcard_ssid_tlv;
730         struct mwifiex_ie_types_rates_param_set *rates_tlv;
731         u8 *tlv_pos;
732         u32 num_probes;
733         u32 ssid_len;
734         u32 chan_idx;
735         u32 chan_num;
736         u32 scan_type;
737         u16 scan_dur;
738         u8 channel;
739         u8 radio_type;
740         int i;
741         u8 ssid_filter;
742         u8 rates[MWIFIEX_SUPPORTED_RATES];
743         u32 rates_size;
744         struct mwifiex_ie_types_htcap *ht_cap;
745
746         /* The tlv_buf_len is calculated for each scan command.  The TLVs added
747            in this routine will be preserved since the routine that sends the
748            command will append channelTLVs at *chan_list_out.  The difference
749            between the *chan_list_out and the tlv_buf start will be used to
750            calculate the size of anything we add in this routine. */
751         scan_cfg_out->tlv_buf_len = 0;
752
753         /* Running tlv pointer.  Assigned to chan_list_out at end of function
754            so later routines know where channels can be added to the command
755            buf */
756         tlv_pos = scan_cfg_out->tlv_buf;
757
758         /* Initialize the scan as un-filtered; the flag is later set to TRUE
759            below if a SSID or BSSID filter is sent in the command */
760         *filtered_scan = false;
761
762         /* Initialize the scan as not being only on the current channel.  If
763            the channel list is customized, only contains one channel, and is
764            the active channel, this is set true and data flow is not halted. */
765         *scan_current_only = false;
766
767         if (user_scan_in) {
768
769                 /* Default the ssid_filter flag to TRUE, set false under
770                    certain wildcard conditions and qualified by the existence
771                    of an SSID list before marking the scan as filtered */
772                 ssid_filter = true;
773
774                 /* Set the BSS type scan filter, use Adapter setting if
775                    unset */
776                 scan_cfg_out->bss_mode =
777                         (user_scan_in->bss_mode ? (u8) user_scan_in->
778                          bss_mode : (u8) adapter->scan_mode);
779
780                 /* Set the number of probes to send, use Adapter setting
781                    if unset */
782                 num_probes =
783                         (user_scan_in->num_probes ? user_scan_in->
784                          num_probes : adapter->scan_probes);
785
786                 /*
787                  * Set the BSSID filter to the incoming configuration,
788                  * if non-zero.  If not set, it will remain disabled
789                  * (all zeros).
790                  */
791                 memcpy(scan_cfg_out->specific_bssid,
792                        user_scan_in->specific_bssid,
793                        sizeof(scan_cfg_out->specific_bssid));
794
795                 for (i = 0; i < user_scan_in->num_ssids; i++) {
796                         ssid_len = user_scan_in->ssid_list[i].ssid_len;
797
798                         wildcard_ssid_tlv =
799                                 (struct mwifiex_ie_types_wildcard_ssid_params *)
800                                 tlv_pos;
801                         wildcard_ssid_tlv->header.type =
802                                 cpu_to_le16(TLV_TYPE_WILDCARDSSID);
803                         wildcard_ssid_tlv->header.len = cpu_to_le16(
804                                 (u16) (ssid_len + sizeof(wildcard_ssid_tlv->
805                                                          max_ssid_length)));
806
807                         /*
808                          * max_ssid_length = 0 tells firmware to perform
809                          * specific scan for the SSID filled, whereas
810                          * max_ssid_length = IEEE80211_MAX_SSID_LEN is for
811                          * wildcard scan.
812                          */
813                         if (ssid_len)
814                                 wildcard_ssid_tlv->max_ssid_length = 0;
815                         else
816                                 wildcard_ssid_tlv->max_ssid_length =
817                                                         IEEE80211_MAX_SSID_LEN;
818
819                         memcpy(wildcard_ssid_tlv->ssid,
820                                user_scan_in->ssid_list[i].ssid, ssid_len);
821
822                         tlv_pos += (sizeof(wildcard_ssid_tlv->header)
823                                 + le16_to_cpu(wildcard_ssid_tlv->header.len));
824
825                         dev_dbg(adapter->dev, "info: scan: ssid[%d]: %s, %d\n",
826                                 i, wildcard_ssid_tlv->ssid,
827                                 wildcard_ssid_tlv->max_ssid_length);
828
829                         /* Empty wildcard ssid with a maxlen will match many or
830                            potentially all SSIDs (maxlen == 32), therefore do
831                            not treat the scan as
832                            filtered. */
833                         if (!ssid_len && wildcard_ssid_tlv->max_ssid_length)
834                                 ssid_filter = false;
835                 }
836
837                 /*
838                  *  The default number of channels sent in the command is low to
839                  *  ensure the response buffer from the firmware does not
840                  *  truncate scan results.  That is not an issue with an SSID
841                  *  or BSSID filter applied to the scan results in the firmware.
842                  */
843                 if ((i && ssid_filter) ||
844                     !is_zero_ether_addr(scan_cfg_out->specific_bssid))
845                         *filtered_scan = true;
846         } else {
847                 scan_cfg_out->bss_mode = (u8) adapter->scan_mode;
848                 num_probes = adapter->scan_probes;
849         }
850
851         /*
852          *  If a specific BSSID or SSID is used, the number of channels in the
853          *  scan command will be increased to the absolute maximum.
854          */
855         if (*filtered_scan)
856                 *max_chan_per_scan = MWIFIEX_MAX_CHANNELS_PER_SPECIFIC_SCAN;
857         else
858                 *max_chan_per_scan = MWIFIEX_DEF_CHANNELS_PER_SCAN_CMD;
859
860         /* If the input config or adapter has the number of Probes set,
861            add tlv */
862         if (num_probes) {
863
864                 dev_dbg(adapter->dev, "info: scan: num_probes = %d\n",
865                         num_probes);
866
867                 num_probes_tlv = (struct mwifiex_ie_types_num_probes *) tlv_pos;
868                 num_probes_tlv->header.type = cpu_to_le16(TLV_TYPE_NUMPROBES);
869                 num_probes_tlv->header.len =
870                         cpu_to_le16(sizeof(num_probes_tlv->num_probes));
871                 num_probes_tlv->num_probes = cpu_to_le16((u16) num_probes);
872
873                 tlv_pos += sizeof(num_probes_tlv->header) +
874                         le16_to_cpu(num_probes_tlv->header.len);
875
876         }
877
878         /* Append rates tlv */
879         memset(rates, 0, sizeof(rates));
880
881         rates_size = mwifiex_get_supported_rates(priv, rates);
882
883         rates_tlv = (struct mwifiex_ie_types_rates_param_set *) tlv_pos;
884         rates_tlv->header.type = cpu_to_le16(WLAN_EID_SUPP_RATES);
885         rates_tlv->header.len = cpu_to_le16((u16) rates_size);
886         memcpy(rates_tlv->rates, rates, rates_size);
887         tlv_pos += sizeof(rates_tlv->header) + rates_size;
888
889         dev_dbg(adapter->dev, "info: SCAN_CMD: Rates size = %d\n", rates_size);
890
891         if (ISSUPP_11NENABLED(priv->adapter->fw_cap_info) &&
892             (priv->adapter->config_bands & BAND_GN ||
893              priv->adapter->config_bands & BAND_AN)) {
894                 ht_cap = (struct mwifiex_ie_types_htcap *) tlv_pos;
895                 memset(ht_cap, 0, sizeof(struct mwifiex_ie_types_htcap));
896                 ht_cap->header.type = cpu_to_le16(WLAN_EID_HT_CAPABILITY);
897                 ht_cap->header.len =
898                                 cpu_to_le16(sizeof(struct ieee80211_ht_cap));
899                 radio_type =
900                         mwifiex_band_to_radio_type(priv->adapter->config_bands);
901                 mwifiex_fill_cap_info(priv, radio_type, ht_cap);
902                 tlv_pos += sizeof(struct mwifiex_ie_types_htcap);
903         }
904
905         /* Append vendor specific IE TLV */
906         mwifiex_cmd_append_vsie_tlv(priv, MWIFIEX_VSIE_MASK_SCAN, &tlv_pos);
907
908         /*
909          * Set the output for the channel TLV to the address in the tlv buffer
910          *   past any TLVs that were added in this function (SSID, num_probes).
911          *   Channel TLVs will be added past this for each scan command,
912          *   preserving the TLVs that were previously added.
913          */
914         *chan_list_out =
915                 (struct mwifiex_ie_types_chan_list_param_set *) tlv_pos;
916
917         if (user_scan_in && user_scan_in->chan_list[0].chan_number) {
918
919                 dev_dbg(adapter->dev, "info: Scan: Using supplied channel list\n");
920
921                 for (chan_idx = 0;
922                      chan_idx < MWIFIEX_USER_SCAN_CHAN_MAX &&
923                      user_scan_in->chan_list[chan_idx].chan_number;
924                      chan_idx++) {
925
926                         channel = user_scan_in->chan_list[chan_idx].chan_number;
927                         (scan_chan_list + chan_idx)->chan_number = channel;
928
929                         radio_type =
930                                 user_scan_in->chan_list[chan_idx].radio_type;
931                         (scan_chan_list + chan_idx)->radio_type = radio_type;
932
933                         scan_type = user_scan_in->chan_list[chan_idx].scan_type;
934
935                         if (scan_type == MWIFIEX_SCAN_TYPE_PASSIVE)
936                                 (scan_chan_list +
937                                  chan_idx)->chan_scan_mode_bitmap
938                                         |= MWIFIEX_PASSIVE_SCAN;
939                         else
940                                 (scan_chan_list +
941                                  chan_idx)->chan_scan_mode_bitmap
942                                         &= ~MWIFIEX_PASSIVE_SCAN;
943
944                         if (*filtered_scan)
945                                 (scan_chan_list +
946                                  chan_idx)->chan_scan_mode_bitmap
947                                         |= MWIFIEX_DISABLE_CHAN_FILT;
948
949                         if (user_scan_in->chan_list[chan_idx].scan_time) {
950                                 scan_dur = (u16) user_scan_in->
951                                         chan_list[chan_idx].scan_time;
952                         } else {
953                                 if (scan_type == MWIFIEX_SCAN_TYPE_PASSIVE)
954                                         scan_dur = adapter->passive_scan_time;
955                                 else if (*filtered_scan)
956                                         scan_dur = adapter->specific_scan_time;
957                                 else
958                                         scan_dur = adapter->active_scan_time;
959                         }
960
961                         (scan_chan_list + chan_idx)->min_scan_time =
962                                 cpu_to_le16(scan_dur);
963                         (scan_chan_list + chan_idx)->max_scan_time =
964                                 cpu_to_le16(scan_dur);
965                 }
966
967                 /* Check if we are only scanning the current channel */
968                 if ((chan_idx == 1) &&
969                     (user_scan_in->chan_list[0].chan_number ==
970                      priv->curr_bss_params.bss_descriptor.channel)) {
971                         *scan_current_only = true;
972                         dev_dbg(adapter->dev,
973                                 "info: Scan: Scanning current channel only\n");
974                 }
975                 chan_num = chan_idx;
976         } else {
977                 dev_dbg(adapter->dev,
978                         "info: Scan: Creating full region channel list\n");
979                 chan_num = mwifiex_scan_create_channel_list(priv, user_scan_in,
980                                                             scan_chan_list,
981                                                             *filtered_scan);
982         }
983
984         /*
985          * In associated state we will reduce the number of channels scanned per
986          * scan command to avoid any traffic delay/loss. This number is decided
987          * based on total number of channels to be scanned due to constraints
988          * of command buffers.
989          */
990         if (priv->media_connected) {
991                 if (chan_num < MWIFIEX_LIMIT_1_CHANNEL_PER_SCAN_CMD)
992                         *max_chan_per_scan = 1;
993                 else if (chan_num < MWIFIEX_LIMIT_2_CHANNELS_PER_SCAN_CMD)
994                         *max_chan_per_scan = 2;
995                 else if (chan_num < MWIFIEX_LIMIT_3_CHANNELS_PER_SCAN_CMD)
996                         *max_chan_per_scan = 3;
997                 else
998                         *max_chan_per_scan = 4;
999         }
1000 }
1001
1002 /*
1003  * This function inspects the scan response buffer for pointers to
1004  * expected TLVs.
1005  *
1006  * TLVs can be included at the end of the scan response BSS information.
1007  *
1008  * Data in the buffer is parsed pointers to TLVs that can potentially
1009  * be passed back in the response.
1010  */
1011 static void
1012 mwifiex_ret_802_11_scan_get_tlv_ptrs(struct mwifiex_adapter *adapter,
1013                                      struct mwifiex_ie_types_data *tlv,
1014                                      u32 tlv_buf_size, u32 req_tlv_type,
1015                                      struct mwifiex_ie_types_data **tlv_data)
1016 {
1017         struct mwifiex_ie_types_data *current_tlv;
1018         u32 tlv_buf_left;
1019         u32 tlv_type;
1020         u32 tlv_len;
1021
1022         current_tlv = tlv;
1023         tlv_buf_left = tlv_buf_size;
1024         *tlv_data = NULL;
1025
1026         dev_dbg(adapter->dev, "info: SCAN_RESP: tlv_buf_size = %d\n",
1027                 tlv_buf_size);
1028
1029         while (tlv_buf_left >= sizeof(struct mwifiex_ie_types_header)) {
1030
1031                 tlv_type = le16_to_cpu(current_tlv->header.type);
1032                 tlv_len = le16_to_cpu(current_tlv->header.len);
1033
1034                 if (sizeof(tlv->header) + tlv_len > tlv_buf_left) {
1035                         dev_err(adapter->dev, "SCAN_RESP: TLV buffer corrupt\n");
1036                         break;
1037                 }
1038
1039                 if (req_tlv_type == tlv_type) {
1040                         switch (tlv_type) {
1041                         case TLV_TYPE_TSFTIMESTAMP:
1042                                 dev_dbg(adapter->dev, "info: SCAN_RESP: TSF "
1043                                         "timestamp TLV, len = %d\n", tlv_len);
1044                                 *tlv_data = current_tlv;
1045                                 break;
1046                         case TLV_TYPE_CHANNELBANDLIST:
1047                                 dev_dbg(adapter->dev, "info: SCAN_RESP: channel"
1048                                         " band list TLV, len = %d\n", tlv_len);
1049                                 *tlv_data = current_tlv;
1050                                 break;
1051                         default:
1052                                 dev_err(adapter->dev,
1053                                         "SCAN_RESP: unhandled TLV = %d\n",
1054                                        tlv_type);
1055                                 /* Give up, this seems corrupted */
1056                                 return;
1057                         }
1058                 }
1059
1060                 if (*tlv_data)
1061                         break;
1062
1063
1064                 tlv_buf_left -= (sizeof(tlv->header) + tlv_len);
1065                 current_tlv =
1066                         (struct mwifiex_ie_types_data *) (current_tlv->data +
1067                                                           tlv_len);
1068
1069         }                       /* while */
1070 }
1071
1072 /*
1073  * This function parses provided beacon buffer and updates
1074  * respective fields in bss descriptor structure.
1075  */
1076 int mwifiex_update_bss_desc_with_ie(struct mwifiex_adapter *adapter,
1077                                     struct mwifiex_bssdescriptor *bss_entry)
1078 {
1079         int ret = 0;
1080         u8 element_id;
1081         struct ieee_types_fh_param_set *fh_param_set;
1082         struct ieee_types_ds_param_set *ds_param_set;
1083         struct ieee_types_cf_param_set *cf_param_set;
1084         struct ieee_types_ibss_param_set *ibss_param_set;
1085         u8 *current_ptr;
1086         u8 *rate;
1087         u8 element_len;
1088         u16 total_ie_len;
1089         u8 bytes_to_copy;
1090         u8 rate_size;
1091         u8 found_data_rate_ie;
1092         u32 bytes_left;
1093         struct ieee_types_vendor_specific *vendor_ie;
1094         const u8 wpa_oui[4] = { 0x00, 0x50, 0xf2, 0x01 };
1095         const u8 wmm_oui[4] = { 0x00, 0x50, 0xf2, 0x02 };
1096
1097         found_data_rate_ie = false;
1098         rate_size = 0;
1099         current_ptr = bss_entry->beacon_buf;
1100         bytes_left = bss_entry->beacon_buf_size;
1101
1102         /* Process variable IE */
1103         while (bytes_left >= 2) {
1104                 element_id = *current_ptr;
1105                 element_len = *(current_ptr + 1);
1106                 total_ie_len = element_len + sizeof(struct ieee_types_header);
1107
1108                 if (bytes_left < total_ie_len) {
1109                         dev_err(adapter->dev, "err: InterpretIE: in processing"
1110                                 " IE, bytes left < IE length\n");
1111                         return -1;
1112                 }
1113                 switch (element_id) {
1114                 case WLAN_EID_SSID:
1115                         bss_entry->ssid.ssid_len = element_len;
1116                         memcpy(bss_entry->ssid.ssid, (current_ptr + 2),
1117                                element_len);
1118                         dev_dbg(adapter->dev,
1119                                 "info: InterpretIE: ssid: %-32s\n",
1120                                 bss_entry->ssid.ssid);
1121                         break;
1122
1123                 case WLAN_EID_SUPP_RATES:
1124                         memcpy(bss_entry->data_rates, current_ptr + 2,
1125                                element_len);
1126                         memcpy(bss_entry->supported_rates, current_ptr + 2,
1127                                element_len);
1128                         rate_size = element_len;
1129                         found_data_rate_ie = true;
1130                         break;
1131
1132                 case WLAN_EID_FH_PARAMS:
1133                         fh_param_set =
1134                                 (struct ieee_types_fh_param_set *) current_ptr;
1135                         memcpy(&bss_entry->phy_param_set.fh_param_set,
1136                                fh_param_set,
1137                                sizeof(struct ieee_types_fh_param_set));
1138                         break;
1139
1140                 case WLAN_EID_DS_PARAMS:
1141                         ds_param_set =
1142                                 (struct ieee_types_ds_param_set *) current_ptr;
1143
1144                         bss_entry->channel = ds_param_set->current_chan;
1145
1146                         memcpy(&bss_entry->phy_param_set.ds_param_set,
1147                                ds_param_set,
1148                                sizeof(struct ieee_types_ds_param_set));
1149                         break;
1150
1151                 case WLAN_EID_CF_PARAMS:
1152                         cf_param_set =
1153                                 (struct ieee_types_cf_param_set *) current_ptr;
1154                         memcpy(&bss_entry->ss_param_set.cf_param_set,
1155                                cf_param_set,
1156                                sizeof(struct ieee_types_cf_param_set));
1157                         break;
1158
1159                 case WLAN_EID_IBSS_PARAMS:
1160                         ibss_param_set =
1161                                 (struct ieee_types_ibss_param_set *)
1162                                 current_ptr;
1163                         memcpy(&bss_entry->ss_param_set.ibss_param_set,
1164                                ibss_param_set,
1165                                sizeof(struct ieee_types_ibss_param_set));
1166                         break;
1167
1168                 case WLAN_EID_ERP_INFO:
1169                         bss_entry->erp_flags = *(current_ptr + 2);
1170                         break;
1171
1172                 case WLAN_EID_EXT_SUPP_RATES:
1173                         /*
1174                          * Only process extended supported rate
1175                          * if data rate is already found.
1176                          * Data rate IE should come before
1177                          * extended supported rate IE
1178                          */
1179                         if (found_data_rate_ie) {
1180                                 if ((element_len + rate_size) >
1181                                     MWIFIEX_SUPPORTED_RATES)
1182                                         bytes_to_copy =
1183                                                 (MWIFIEX_SUPPORTED_RATES -
1184                                                  rate_size);
1185                                 else
1186                                         bytes_to_copy = element_len;
1187
1188                                 rate = (u8 *) bss_entry->data_rates;
1189                                 rate += rate_size;
1190                                 memcpy(rate, current_ptr + 2, bytes_to_copy);
1191
1192                                 rate = (u8 *) bss_entry->supported_rates;
1193                                 rate += rate_size;
1194                                 memcpy(rate, current_ptr + 2, bytes_to_copy);
1195                         }
1196                         break;
1197
1198                 case WLAN_EID_VENDOR_SPECIFIC:
1199                         vendor_ie = (struct ieee_types_vendor_specific *)
1200                                         current_ptr;
1201
1202                         if (!memcmp
1203                             (vendor_ie->vend_hdr.oui, wpa_oui,
1204                              sizeof(wpa_oui))) {
1205                                 bss_entry->bcn_wpa_ie =
1206                                         (struct ieee_types_vendor_specific *)
1207                                         current_ptr;
1208                                 bss_entry->wpa_offset = (u16)
1209                                         (current_ptr - bss_entry->beacon_buf);
1210                         } else if (!memcmp(vendor_ie->vend_hdr.oui, wmm_oui,
1211                                     sizeof(wmm_oui))) {
1212                                 if (total_ie_len ==
1213                                     sizeof(struct ieee_types_wmm_parameter) ||
1214                                     total_ie_len ==
1215                                     sizeof(struct ieee_types_wmm_info))
1216                                         /*
1217                                          * Only accept and copy the WMM IE if
1218                                          * it matches the size expected for the
1219                                          * WMM Info IE or the WMM Parameter IE.
1220                                          */
1221                                         memcpy((u8 *) &bss_entry->wmm_ie,
1222                                                current_ptr, total_ie_len);
1223                         }
1224                         break;
1225                 case WLAN_EID_RSN:
1226                         bss_entry->bcn_rsn_ie =
1227                                 (struct ieee_types_generic *) current_ptr;
1228                         bss_entry->rsn_offset = (u16) (current_ptr -
1229                                                         bss_entry->beacon_buf);
1230                         break;
1231                 case WLAN_EID_BSS_AC_ACCESS_DELAY:
1232                         bss_entry->bcn_wapi_ie =
1233                                 (struct ieee_types_generic *) current_ptr;
1234                         bss_entry->wapi_offset = (u16) (current_ptr -
1235                                                         bss_entry->beacon_buf);
1236                         break;
1237                 case WLAN_EID_HT_CAPABILITY:
1238                         bss_entry->bcn_ht_cap = (struct ieee80211_ht_cap *)
1239                                         (current_ptr +
1240                                         sizeof(struct ieee_types_header));
1241                         bss_entry->ht_cap_offset = (u16) (current_ptr +
1242                                         sizeof(struct ieee_types_header) -
1243                                         bss_entry->beacon_buf);
1244                         break;
1245                 case WLAN_EID_HT_OPERATION:
1246                         bss_entry->bcn_ht_oper =
1247                                 (struct ieee80211_ht_operation *)(current_ptr +
1248                                         sizeof(struct ieee_types_header));
1249                         bss_entry->ht_info_offset = (u16) (current_ptr +
1250                                         sizeof(struct ieee_types_header) -
1251                                         bss_entry->beacon_buf);
1252                         break;
1253                 case WLAN_EID_BSS_COEX_2040:
1254                         bss_entry->bcn_bss_co_2040 = current_ptr +
1255                                 sizeof(struct ieee_types_header);
1256                         bss_entry->bss_co_2040_offset = (u16) (current_ptr +
1257                                         sizeof(struct ieee_types_header) -
1258                                                 bss_entry->beacon_buf);
1259                         break;
1260                 case WLAN_EID_EXT_CAPABILITY:
1261                         bss_entry->bcn_ext_cap = current_ptr +
1262                                 sizeof(struct ieee_types_header);
1263                         bss_entry->ext_cap_offset = (u16) (current_ptr +
1264                                         sizeof(struct ieee_types_header) -
1265                                         bss_entry->beacon_buf);
1266                         break;
1267                 default:
1268                         break;
1269                 }
1270
1271                 current_ptr += element_len + 2;
1272
1273                 /* Need to account for IE ID and IE Len */
1274                 bytes_left -= (element_len + 2);
1275
1276         }       /* while (bytes_left > 2) */
1277         return ret;
1278 }
1279
1280 /*
1281  * This function converts radio type scan parameter to a band configuration
1282  * to be used in join command.
1283  */
1284 static u8
1285 mwifiex_radio_type_to_band(u8 radio_type)
1286 {
1287         switch (radio_type) {
1288         case HostCmd_SCAN_RADIO_TYPE_A:
1289                 return BAND_A;
1290         case HostCmd_SCAN_RADIO_TYPE_BG:
1291         default:
1292                 return BAND_G;
1293         }
1294 }
1295
1296 /*
1297  * This is an internal function used to start a scan based on an input
1298  * configuration.
1299  *
1300  * This uses the input user scan configuration information when provided in
1301  * order to send the appropriate scan commands to firmware to populate or
1302  * update the internal driver scan table.
1303  */
1304 int mwifiex_scan_networks(struct mwifiex_private *priv,
1305                           const struct mwifiex_user_scan_cfg *user_scan_in)
1306 {
1307         int ret;
1308         struct mwifiex_adapter *adapter = priv->adapter;
1309         struct cmd_ctrl_node *cmd_node;
1310         union mwifiex_scan_cmd_config_tlv *scan_cfg_out;
1311         struct mwifiex_ie_types_chan_list_param_set *chan_list_out;
1312         u32 buf_size;
1313         struct mwifiex_chan_scan_param_set *scan_chan_list;
1314         u8 filtered_scan;
1315         u8 scan_current_chan_only;
1316         u8 max_chan_per_scan;
1317         unsigned long flags;
1318
1319         if (adapter->scan_processing) {
1320                 dev_err(adapter->dev, "cmd: Scan already in process...\n");
1321                 return -EBUSY;
1322         }
1323
1324         if (priv->scan_block) {
1325                 dev_err(adapter->dev,
1326                         "cmd: Scan is blocked during association...\n");
1327                 return -EBUSY;
1328         }
1329
1330         spin_lock_irqsave(&adapter->mwifiex_cmd_lock, flags);
1331         adapter->scan_processing = true;
1332         spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, flags);
1333
1334         scan_cfg_out = kzalloc(sizeof(union mwifiex_scan_cmd_config_tlv),
1335                                                                 GFP_KERNEL);
1336         if (!scan_cfg_out) {
1337                 dev_err(adapter->dev, "failed to alloc scan_cfg_out\n");
1338                 ret = -ENOMEM;
1339                 goto done;
1340         }
1341
1342         buf_size = sizeof(struct mwifiex_chan_scan_param_set) *
1343                                                 MWIFIEX_USER_SCAN_CHAN_MAX;
1344         scan_chan_list = kzalloc(buf_size, GFP_KERNEL);
1345         if (!scan_chan_list) {
1346                 dev_err(adapter->dev, "failed to alloc scan_chan_list\n");
1347                 kfree(scan_cfg_out);
1348                 ret = -ENOMEM;
1349                 goto done;
1350         }
1351
1352         mwifiex_config_scan(priv, user_scan_in, &scan_cfg_out->config,
1353                             &chan_list_out, scan_chan_list, &max_chan_per_scan,
1354                             &filtered_scan, &scan_current_chan_only);
1355
1356         ret = mwifiex_scan_channel_list(priv, max_chan_per_scan, filtered_scan,
1357                                         &scan_cfg_out->config, chan_list_out,
1358                                         scan_chan_list);
1359
1360         /* Get scan command from scan_pending_q and put to cmd_pending_q */
1361         if (!ret) {
1362                 spin_lock_irqsave(&adapter->scan_pending_q_lock, flags);
1363                 if (!list_empty(&adapter->scan_pending_q)) {
1364                         cmd_node = list_first_entry(&adapter->scan_pending_q,
1365                                                     struct cmd_ctrl_node, list);
1366                         list_del(&cmd_node->list);
1367                         spin_unlock_irqrestore(&adapter->scan_pending_q_lock,
1368                                                flags);
1369                         adapter->cmd_queued = cmd_node;
1370                         mwifiex_insert_cmd_to_pending_q(adapter, cmd_node,
1371                                                         true);
1372                         queue_work(adapter->workqueue, &adapter->main_work);
1373                 } else {
1374                         spin_unlock_irqrestore(&adapter->scan_pending_q_lock,
1375                                                flags);
1376                 }
1377         }
1378
1379         kfree(scan_cfg_out);
1380         kfree(scan_chan_list);
1381 done:
1382         if (ret) {
1383                 spin_lock_irqsave(&adapter->mwifiex_cmd_lock, flags);
1384                 adapter->scan_processing = false;
1385                 spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, flags);
1386         }
1387         return ret;
1388 }
1389
1390 /*
1391  * This function prepares a scan command to be sent to the firmware.
1392  *
1393  * This uses the scan command configuration sent to the command processing
1394  * module in command preparation stage to configure a scan command structure
1395  * to send to firmware.
1396  *
1397  * The fixed fields specifying the BSS type and BSSID filters as well as a
1398  * variable number/length of TLVs are sent in the command to firmware.
1399  *
1400  * Preparation also includes -
1401  *      - Setting command ID, and proper size
1402  *      - Ensuring correct endian-ness
1403  */
1404 int mwifiex_cmd_802_11_scan(struct host_cmd_ds_command *cmd,
1405                             struct mwifiex_scan_cmd_config *scan_cfg)
1406 {
1407         struct host_cmd_ds_802_11_scan *scan_cmd = &cmd->params.scan;
1408
1409         /* Set fixed field variables in scan command */
1410         scan_cmd->bss_mode = scan_cfg->bss_mode;
1411         memcpy(scan_cmd->bssid, scan_cfg->specific_bssid,
1412                sizeof(scan_cmd->bssid));
1413         memcpy(scan_cmd->tlv_buffer, scan_cfg->tlv_buf, scan_cfg->tlv_buf_len);
1414
1415         cmd->command = cpu_to_le16(HostCmd_CMD_802_11_SCAN);
1416
1417         /* Size is equal to the sizeof(fixed portions) + the TLV len + header */
1418         cmd->size = cpu_to_le16((u16) (sizeof(scan_cmd->bss_mode)
1419                                           + sizeof(scan_cmd->bssid)
1420                                           + scan_cfg->tlv_buf_len + S_DS_GEN));
1421
1422         return 0;
1423 }
1424
1425 /*
1426  * This function checks compatibility of requested network with current
1427  * driver settings.
1428  */
1429 int mwifiex_check_network_compatibility(struct mwifiex_private *priv,
1430                                         struct mwifiex_bssdescriptor *bss_desc)
1431 {
1432         int ret = -1;
1433
1434         if (!bss_desc)
1435                 return -1;
1436
1437         if ((mwifiex_get_cfp(priv, (u8) bss_desc->bss_band,
1438                              (u16) bss_desc->channel, 0))) {
1439                 switch (priv->bss_mode) {
1440                 case NL80211_IFTYPE_STATION:
1441                 case NL80211_IFTYPE_ADHOC:
1442                         ret = mwifiex_is_network_compatible(priv, bss_desc,
1443                                                             priv->bss_mode);
1444                         if (ret)
1445                                 dev_err(priv->adapter->dev,
1446                                         "Incompatible network settings\n");
1447                         break;
1448                 default:
1449                         ret = 0;
1450                 }
1451         }
1452
1453         return ret;
1454 }
1455
1456 static int mwifiex_update_curr_bss_params(struct mwifiex_private *priv,
1457                                           struct cfg80211_bss *bss)
1458 {
1459         struct mwifiex_bssdescriptor *bss_desc;
1460         int ret;
1461         unsigned long flags;
1462
1463         /* Allocate and fill new bss descriptor */
1464         bss_desc = kzalloc(sizeof(struct mwifiex_bssdescriptor),
1465                         GFP_KERNEL);
1466         if (!bss_desc) {
1467                 dev_err(priv->adapter->dev, " failed to alloc bss_desc\n");
1468                 return -ENOMEM;
1469         }
1470
1471         ret = mwifiex_fill_new_bss_desc(priv, bss, bss_desc);
1472         if (ret)
1473                 goto done;
1474
1475         ret = mwifiex_check_network_compatibility(priv, bss_desc);
1476         if (ret)
1477                 goto done;
1478
1479         /* Update current bss descriptor parameters */
1480         spin_lock_irqsave(&priv->curr_bcn_buf_lock, flags);
1481         priv->curr_bss_params.bss_descriptor.bcn_wpa_ie = NULL;
1482         priv->curr_bss_params.bss_descriptor.wpa_offset = 0;
1483         priv->curr_bss_params.bss_descriptor.bcn_rsn_ie = NULL;
1484         priv->curr_bss_params.bss_descriptor.rsn_offset = 0;
1485         priv->curr_bss_params.bss_descriptor.bcn_wapi_ie = NULL;
1486         priv->curr_bss_params.bss_descriptor.wapi_offset = 0;
1487         priv->curr_bss_params.bss_descriptor.bcn_ht_cap = NULL;
1488         priv->curr_bss_params.bss_descriptor.ht_cap_offset =
1489                 0;
1490         priv->curr_bss_params.bss_descriptor.bcn_ht_oper = NULL;
1491         priv->curr_bss_params.bss_descriptor.ht_info_offset =
1492                 0;
1493         priv->curr_bss_params.bss_descriptor.bcn_bss_co_2040 =
1494                 NULL;
1495         priv->curr_bss_params.bss_descriptor.
1496                 bss_co_2040_offset = 0;
1497         priv->curr_bss_params.bss_descriptor.bcn_ext_cap = NULL;
1498         priv->curr_bss_params.bss_descriptor.ext_cap_offset = 0;
1499         priv->curr_bss_params.bss_descriptor.beacon_buf = NULL;
1500         priv->curr_bss_params.bss_descriptor.beacon_buf_size =
1501                 0;
1502
1503         /* Make a copy of current BSSID descriptor */
1504         memcpy(&priv->curr_bss_params.bss_descriptor, bss_desc,
1505                sizeof(priv->curr_bss_params.bss_descriptor));
1506         mwifiex_save_curr_bcn(priv);
1507         spin_unlock_irqrestore(&priv->curr_bcn_buf_lock, flags);
1508
1509 done:
1510         kfree(bss_desc);
1511         return 0;
1512 }
1513
1514 /*
1515  * This function handles the command response of scan.
1516  *
1517  * The response buffer for the scan command has the following
1518  * memory layout:
1519  *
1520  *      .-------------------------------------------------------------.
1521  *      |  Header (4 * sizeof(t_u16)):  Standard command response hdr |
1522  *      .-------------------------------------------------------------.
1523  *      |  BufSize (t_u16) : sizeof the BSS Description data          |
1524  *      .-------------------------------------------------------------.
1525  *      |  NumOfSet (t_u8) : Number of BSS Descs returned             |
1526  *      .-------------------------------------------------------------.
1527  *      |  BSSDescription data (variable, size given in BufSize)      |
1528  *      .-------------------------------------------------------------.
1529  *      |  TLV data (variable, size calculated using Header->Size,    |
1530  *      |            BufSize and sizeof the fixed fields above)       |
1531  *      .-------------------------------------------------------------.
1532  */
1533 int mwifiex_ret_802_11_scan(struct mwifiex_private *priv,
1534                             struct host_cmd_ds_command *resp)
1535 {
1536         int ret = 0;
1537         struct mwifiex_adapter *adapter = priv->adapter;
1538         struct cmd_ctrl_node *cmd_node;
1539         struct host_cmd_ds_802_11_scan_rsp *scan_rsp;
1540         struct mwifiex_ie_types_data *tlv_data;
1541         struct mwifiex_ie_types_tsf_timestamp *tsf_tlv;
1542         u8 *bss_info;
1543         u32 scan_resp_size;
1544         u32 bytes_left;
1545         u32 idx;
1546         u32 tlv_buf_size;
1547         struct mwifiex_chan_freq_power *cfp;
1548         struct mwifiex_ie_types_chan_band_list_param_set *chan_band_tlv;
1549         struct chan_band_param_set *chan_band;
1550         u8 is_bgscan_resp;
1551         unsigned long flags;
1552         struct cfg80211_bss *bss;
1553
1554         is_bgscan_resp = (le16_to_cpu(resp->command)
1555                           == HostCmd_CMD_802_11_BG_SCAN_QUERY);
1556         if (is_bgscan_resp)
1557                 scan_rsp = &resp->params.bg_scan_query_resp.scan_resp;
1558         else
1559                 scan_rsp = &resp->params.scan_resp;
1560
1561
1562         if (scan_rsp->number_of_sets > MWIFIEX_MAX_AP) {
1563                 dev_err(adapter->dev, "SCAN_RESP: too many AP returned (%d)\n",
1564                         scan_rsp->number_of_sets);
1565                 ret = -1;
1566                 goto done;
1567         }
1568
1569         bytes_left = le16_to_cpu(scan_rsp->bss_descript_size);
1570         dev_dbg(adapter->dev, "info: SCAN_RESP: bss_descript_size %d\n",
1571                 bytes_left);
1572
1573         scan_resp_size = le16_to_cpu(resp->size);
1574
1575         dev_dbg(adapter->dev,
1576                 "info: SCAN_RESP: returned %d APs before parsing\n",
1577                 scan_rsp->number_of_sets);
1578
1579         bss_info = scan_rsp->bss_desc_and_tlv_buffer;
1580
1581         /*
1582          * The size of the TLV buffer is equal to the entire command response
1583          *   size (scan_resp_size) minus the fixed fields (sizeof()'s), the
1584          *   BSS Descriptions (bss_descript_size as bytesLef) and the command
1585          *   response header (S_DS_GEN)
1586          */
1587         tlv_buf_size = scan_resp_size - (bytes_left
1588                                          + sizeof(scan_rsp->bss_descript_size)
1589                                          + sizeof(scan_rsp->number_of_sets)
1590                                          + S_DS_GEN);
1591
1592         tlv_data = (struct mwifiex_ie_types_data *) (scan_rsp->
1593                                                  bss_desc_and_tlv_buffer +
1594                                                  bytes_left);
1595
1596         /* Search the TLV buffer space in the scan response for any valid
1597            TLVs */
1598         mwifiex_ret_802_11_scan_get_tlv_ptrs(adapter, tlv_data, tlv_buf_size,
1599                                              TLV_TYPE_TSFTIMESTAMP,
1600                                              (struct mwifiex_ie_types_data **)
1601                                              &tsf_tlv);
1602
1603         /* Search the TLV buffer space in the scan response for any valid
1604            TLVs */
1605         mwifiex_ret_802_11_scan_get_tlv_ptrs(adapter, tlv_data, tlv_buf_size,
1606                                              TLV_TYPE_CHANNELBANDLIST,
1607                                              (struct mwifiex_ie_types_data **)
1608                                              &chan_band_tlv);
1609
1610         for (idx = 0; idx < scan_rsp->number_of_sets && bytes_left; idx++) {
1611                 u8 bssid[ETH_ALEN];
1612                 s32 rssi;
1613                 const u8 *ie_buf;
1614                 size_t ie_len;
1615                 u16 channel = 0;
1616                 u64 fw_tsf = 0;
1617                 u16 beacon_size = 0;
1618                 u32 curr_bcn_bytes;
1619                 u32 freq;
1620                 u16 beacon_period;
1621                 u16 cap_info_bitmap;
1622                 u8 *current_ptr;
1623                 u64 timestamp;
1624                 struct mwifiex_bcn_param *bcn_param;
1625                 struct mwifiex_bss_priv *bss_priv;
1626
1627                 if (bytes_left >= sizeof(beacon_size)) {
1628                         /* Extract & convert beacon size from command buffer */
1629                         memcpy(&beacon_size, bss_info, sizeof(beacon_size));
1630                         bytes_left -= sizeof(beacon_size);
1631                         bss_info += sizeof(beacon_size);
1632                 }
1633
1634                 if (!beacon_size || beacon_size > bytes_left) {
1635                         bss_info += bytes_left;
1636                         bytes_left = 0;
1637                         return -1;
1638                 }
1639
1640                 /* Initialize the current working beacon pointer for this BSS
1641                  * iteration */
1642                 current_ptr = bss_info;
1643
1644                 /* Advance the return beacon pointer past the current beacon */
1645                 bss_info += beacon_size;
1646                 bytes_left -= beacon_size;
1647
1648                 curr_bcn_bytes = beacon_size;
1649
1650                 /*
1651                  * First 5 fields are bssid, RSSI, time stamp, beacon interval,
1652                  *   and capability information
1653                  */
1654                 if (curr_bcn_bytes < sizeof(struct mwifiex_bcn_param)) {
1655                         dev_err(adapter->dev,
1656                                 "InterpretIE: not enough bytes left\n");
1657                         continue;
1658                 }
1659                 bcn_param = (struct mwifiex_bcn_param *)current_ptr;
1660                 current_ptr += sizeof(*bcn_param);
1661                 curr_bcn_bytes -= sizeof(*bcn_param);
1662
1663                 memcpy(bssid, bcn_param->bssid, ETH_ALEN);
1664
1665                 rssi = (s32) bcn_param->rssi;
1666                 rssi = (-rssi) * 100;           /* Convert dBm to mBm */
1667                 dev_dbg(adapter->dev, "info: InterpretIE: RSSI=%d\n", rssi);
1668
1669                 timestamp = le64_to_cpu(bcn_param->timestamp);
1670                 beacon_period = le16_to_cpu(bcn_param->beacon_period);
1671
1672                 cap_info_bitmap = le16_to_cpu(bcn_param->cap_info_bitmap);
1673                 dev_dbg(adapter->dev, "info: InterpretIE: capabilities=0x%X\n",
1674                         cap_info_bitmap);
1675
1676                 /* Rest of the current buffer are IE's */
1677                 ie_buf = current_ptr;
1678                 ie_len = curr_bcn_bytes;
1679                 dev_dbg(adapter->dev,
1680                         "info: InterpretIE: IELength for this AP = %d\n",
1681                         curr_bcn_bytes);
1682
1683                 while (curr_bcn_bytes >= sizeof(struct ieee_types_header)) {
1684                         u8 element_id, element_len;
1685
1686                         element_id = *current_ptr;
1687                         element_len = *(current_ptr + 1);
1688                         if (curr_bcn_bytes < element_len +
1689                                         sizeof(struct ieee_types_header)) {
1690                                 dev_err(priv->adapter->dev,
1691                                         "%s: bytes left < IE length\n",
1692                                         __func__);
1693                                 goto done;
1694                         }
1695                         if (element_id == WLAN_EID_DS_PARAMS) {
1696                                 channel = *(current_ptr + sizeof(struct ieee_types_header));
1697                                 break;
1698                         }
1699
1700                         current_ptr += element_len +
1701                                         sizeof(struct ieee_types_header);
1702                         curr_bcn_bytes -= element_len +
1703                                         sizeof(struct ieee_types_header);
1704                 }
1705
1706                 /*
1707                  * If the TSF TLV was appended to the scan results, save this
1708                  * entry's TSF value in the fw_tsf field. It is the firmware's
1709                  * TSF value at the time the beacon or probe response was
1710                  * received.
1711                  */
1712                 if (tsf_tlv)
1713                         memcpy(&fw_tsf, &tsf_tlv->tsf_data[idx * TSF_DATA_SIZE],
1714                                sizeof(fw_tsf));
1715
1716                 if (channel) {
1717                         struct ieee80211_channel *chan;
1718                         u8 band;
1719
1720                         band = BAND_G;
1721                         if (chan_band_tlv) {
1722                                 chan_band =
1723                                         &chan_band_tlv->chan_band_param[idx];
1724                                 band = mwifiex_radio_type_to_band(
1725                                                 chan_band->radio_type
1726                                                 & (BIT(0) | BIT(1)));
1727                         }
1728
1729                         cfp = mwifiex_get_cfp(priv, band, channel, 0);
1730
1731                         freq = cfp ? cfp->freq : 0;
1732
1733                         chan = ieee80211_get_channel(priv->wdev->wiphy, freq);
1734
1735                         if (chan && !(chan->flags & IEEE80211_CHAN_DISABLED)) {
1736                                 bss = cfg80211_inform_bss(priv->wdev->wiphy,
1737                                               chan, bssid, timestamp,
1738                                               cap_info_bitmap, beacon_period,
1739                                               ie_buf, ie_len, rssi, GFP_KERNEL);
1740                                 bss_priv = (struct mwifiex_bss_priv *)bss->priv;
1741                                 bss_priv->band = band;
1742                                 bss_priv->fw_tsf = fw_tsf;
1743                                 if (priv->media_connected &&
1744                                     !memcmp(bssid,
1745                                             priv->curr_bss_params.bss_descriptor
1746                                             .mac_address, ETH_ALEN))
1747                                         mwifiex_update_curr_bss_params(priv,
1748                                                                        bss);
1749                                 cfg80211_put_bss(bss);
1750                         }
1751                 } else {
1752                         dev_dbg(adapter->dev, "missing BSS channel IE\n");
1753                 }
1754         }
1755
1756         spin_lock_irqsave(&adapter->scan_pending_q_lock, flags);
1757         if (list_empty(&adapter->scan_pending_q)) {
1758                 spin_unlock_irqrestore(&adapter->scan_pending_q_lock, flags);
1759                 spin_lock_irqsave(&adapter->mwifiex_cmd_lock, flags);
1760                 adapter->scan_processing = false;
1761                 spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, flags);
1762
1763                 /* Need to indicate IOCTL complete */
1764                 if (adapter->curr_cmd->wait_q_enabled) {
1765                         adapter->cmd_wait_q.status = 0;
1766                         mwifiex_complete_cmd(adapter, adapter->curr_cmd);
1767                 }
1768                 if (priv->report_scan_result)
1769                         priv->report_scan_result = false;
1770
1771                 if (priv->user_scan_cfg) {
1772                         if (priv->scan_request) {
1773                                 dev_dbg(priv->adapter->dev,
1774                                         "info: notifying scan done\n");
1775                                 cfg80211_scan_done(priv->scan_request, 0);
1776                                 priv->scan_request = NULL;
1777                         } else {
1778                                 dev_dbg(priv->adapter->dev,
1779                                         "info: scan already aborted\n");
1780                         }
1781
1782                         kfree(priv->user_scan_cfg);
1783                         priv->user_scan_cfg = NULL;
1784                 }
1785         } else {
1786                 if (priv->user_scan_cfg && !priv->scan_request) {
1787                         spin_unlock_irqrestore(&adapter->scan_pending_q_lock,
1788                                                flags);
1789                         adapter->scan_delay_cnt = MWIFIEX_MAX_SCAN_DELAY_CNT;
1790                         mod_timer(&priv->scan_delay_timer, jiffies);
1791                         dev_dbg(priv->adapter->dev,
1792                                 "info: %s: triggerring scan abort\n", __func__);
1793                 } else if (!mwifiex_wmm_lists_empty(adapter) &&
1794                            (priv->scan_request && (priv->scan_request->flags &
1795                                             NL80211_SCAN_FLAG_LOW_PRIORITY))) {
1796                         spin_unlock_irqrestore(&adapter->scan_pending_q_lock,
1797                                                flags);
1798                         adapter->scan_delay_cnt = 1;
1799                         mod_timer(&priv->scan_delay_timer, jiffies +
1800                                   msecs_to_jiffies(MWIFIEX_SCAN_DELAY_MSEC));
1801                         dev_dbg(priv->adapter->dev,
1802                                 "info: %s: deferring scan\n", __func__);
1803                 } else {
1804                         /* Get scan command from scan_pending_q and put to
1805                            cmd_pending_q */
1806                         cmd_node = list_first_entry(&adapter->scan_pending_q,
1807                                                     struct cmd_ctrl_node, list);
1808                         list_del(&cmd_node->list);
1809                         spin_unlock_irqrestore(&adapter->scan_pending_q_lock,
1810                                                flags);
1811                         mwifiex_insert_cmd_to_pending_q(adapter, cmd_node,
1812                                                         true);
1813                 }
1814         }
1815
1816 done:
1817         return ret;
1818 }
1819
1820 /*
1821  * This function prepares command for background scan query.
1822  *
1823  * Preparation includes -
1824  *      - Setting command ID and proper size
1825  *      - Setting background scan flush parameter
1826  *      - Ensuring correct endian-ness
1827  */
1828 int mwifiex_cmd_802_11_bg_scan_query(struct host_cmd_ds_command *cmd)
1829 {
1830         struct host_cmd_ds_802_11_bg_scan_query *bg_query =
1831                 &cmd->params.bg_scan_query;
1832
1833         cmd->command = cpu_to_le16(HostCmd_CMD_802_11_BG_SCAN_QUERY);
1834         cmd->size = cpu_to_le16(sizeof(struct host_cmd_ds_802_11_bg_scan_query)
1835                                 + S_DS_GEN);
1836
1837         bg_query->flush = 1;
1838
1839         return 0;
1840 }
1841
1842 /*
1843  * This function inserts scan command node to the scan pending queue.
1844  */
1845 void
1846 mwifiex_queue_scan_cmd(struct mwifiex_private *priv,
1847                        struct cmd_ctrl_node *cmd_node)
1848 {
1849         struct mwifiex_adapter *adapter = priv->adapter;
1850         unsigned long flags;
1851
1852         cmd_node->wait_q_enabled = true;
1853         cmd_node->condition = &adapter->scan_wait_q_woken;
1854         spin_lock_irqsave(&adapter->scan_pending_q_lock, flags);
1855         list_add_tail(&cmd_node->list, &adapter->scan_pending_q);
1856         spin_unlock_irqrestore(&adapter->scan_pending_q_lock, flags);
1857 }
1858
1859 /*
1860  * This function sends a scan command for all available channels to the
1861  * firmware, filtered on a specific SSID.
1862  */
1863 static int mwifiex_scan_specific_ssid(struct mwifiex_private *priv,
1864                                       struct cfg80211_ssid *req_ssid)
1865 {
1866         struct mwifiex_adapter *adapter = priv->adapter;
1867         int ret;
1868         struct mwifiex_user_scan_cfg *scan_cfg;
1869
1870         if (adapter->scan_processing) {
1871                 dev_err(adapter->dev, "cmd: Scan already in process...\n");
1872                 return -EBUSY;
1873         }
1874
1875         if (priv->scan_block) {
1876                 dev_err(adapter->dev,
1877                         "cmd: Scan is blocked during association...\n");
1878                 return -EBUSY;
1879         }
1880
1881         scan_cfg = kzalloc(sizeof(struct mwifiex_user_scan_cfg), GFP_KERNEL);
1882         if (!scan_cfg) {
1883                 dev_err(adapter->dev, "failed to alloc scan_cfg\n");
1884                 return -ENOMEM;
1885         }
1886
1887         scan_cfg->ssid_list = req_ssid;
1888         scan_cfg->num_ssids = 1;
1889
1890         ret = mwifiex_scan_networks(priv, scan_cfg);
1891
1892         kfree(scan_cfg);
1893         return ret;
1894 }
1895
1896 /*
1897  * Sends IOCTL request to start a scan.
1898  *
1899  * This function allocates the IOCTL request buffer, fills it
1900  * with requisite parameters and calls the IOCTL handler.
1901  *
1902  * Scan command can be issued for both normal scan and specific SSID
1903  * scan, depending upon whether an SSID is provided or not.
1904  */
1905 int mwifiex_request_scan(struct mwifiex_private *priv,
1906                          struct cfg80211_ssid *req_ssid)
1907 {
1908         int ret;
1909
1910         if (down_interruptible(&priv->async_sem)) {
1911                 dev_err(priv->adapter->dev, "%s: acquire semaphore\n",
1912                         __func__);
1913                 return -1;
1914         }
1915
1916         priv->adapter->scan_wait_q_woken = false;
1917
1918         if (req_ssid && req_ssid->ssid_len != 0)
1919                 /* Specific SSID scan */
1920                 ret = mwifiex_scan_specific_ssid(priv, req_ssid);
1921         else
1922                 /* Normal scan */
1923                 ret = mwifiex_scan_networks(priv, NULL);
1924
1925         if (!ret)
1926                 ret = mwifiex_wait_queue_complete(priv->adapter);
1927
1928         up(&priv->async_sem);
1929
1930         return ret;
1931 }
1932
1933 /*
1934  * This function appends the vendor specific IE TLV to a buffer.
1935  */
1936 int
1937 mwifiex_cmd_append_vsie_tlv(struct mwifiex_private *priv,
1938                             u16 vsie_mask, u8 **buffer)
1939 {
1940         int id, ret_len = 0;
1941         struct mwifiex_ie_types_vendor_param_set *vs_param_set;
1942
1943         if (!buffer)
1944                 return 0;
1945         if (!(*buffer))
1946                 return 0;
1947
1948         /*
1949          * Traverse through the saved vendor specific IE array and append
1950          * the selected(scan/assoc/adhoc) IE as TLV to the command
1951          */
1952         for (id = 0; id < MWIFIEX_MAX_VSIE_NUM; id++) {
1953                 if (priv->vs_ie[id].mask & vsie_mask) {
1954                         vs_param_set =
1955                                 (struct mwifiex_ie_types_vendor_param_set *)
1956                                 *buffer;
1957                         vs_param_set->header.type =
1958                                 cpu_to_le16(TLV_TYPE_PASSTHROUGH);
1959                         vs_param_set->header.len =
1960                                 cpu_to_le16((((u16) priv->vs_ie[id].ie[1])
1961                                 & 0x00FF) + 2);
1962                         memcpy(vs_param_set->ie, priv->vs_ie[id].ie,
1963                                le16_to_cpu(vs_param_set->header.len));
1964                         *buffer += le16_to_cpu(vs_param_set->header.len) +
1965                                    sizeof(struct mwifiex_ie_types_header);
1966                         ret_len += le16_to_cpu(vs_param_set->header.len) +
1967                                    sizeof(struct mwifiex_ie_types_header);
1968                 }
1969         }
1970         return ret_len;
1971 }
1972
1973 /*
1974  * This function saves a beacon buffer of the current BSS descriptor.
1975  *
1976  * The current beacon buffer is saved so that it can be restored in the
1977  * following cases that makes the beacon buffer not to contain the current
1978  * ssid's beacon buffer.
1979  *      - The current ssid was not found somehow in the last scan.
1980  *      - The current ssid was the last entry of the scan table and overloaded.
1981  */
1982 void
1983 mwifiex_save_curr_bcn(struct mwifiex_private *priv)
1984 {
1985         struct mwifiex_bssdescriptor *curr_bss =
1986                 &priv->curr_bss_params.bss_descriptor;
1987
1988         if (!curr_bss->beacon_buf_size)
1989                 return;
1990
1991         /* allocate beacon buffer at 1st time; or if it's size has changed */
1992         if (!priv->curr_bcn_buf ||
1993             priv->curr_bcn_size != curr_bss->beacon_buf_size) {
1994                 priv->curr_bcn_size = curr_bss->beacon_buf_size;
1995
1996                 kfree(priv->curr_bcn_buf);
1997                 priv->curr_bcn_buf = kmalloc(curr_bss->beacon_buf_size,
1998                                              GFP_ATOMIC);
1999                 if (!priv->curr_bcn_buf) {
2000                         dev_err(priv->adapter->dev,
2001                                 "failed to alloc curr_bcn_buf\n");
2002                         return;
2003                 }
2004         }
2005
2006         memcpy(priv->curr_bcn_buf, curr_bss->beacon_buf,
2007                curr_bss->beacon_buf_size);
2008         dev_dbg(priv->adapter->dev, "info: current beacon saved %d\n",
2009                 priv->curr_bcn_size);
2010
2011         curr_bss->beacon_buf = priv->curr_bcn_buf;
2012
2013         /* adjust the pointers in the current BSS descriptor */
2014         if (curr_bss->bcn_wpa_ie)
2015                 curr_bss->bcn_wpa_ie =
2016                         (struct ieee_types_vendor_specific *)
2017                         (curr_bss->beacon_buf +
2018                          curr_bss->wpa_offset);
2019
2020         if (curr_bss->bcn_rsn_ie)
2021                 curr_bss->bcn_rsn_ie = (struct ieee_types_generic *)
2022                         (curr_bss->beacon_buf +
2023                          curr_bss->rsn_offset);
2024
2025         if (curr_bss->bcn_ht_cap)
2026                 curr_bss->bcn_ht_cap = (struct ieee80211_ht_cap *)
2027                         (curr_bss->beacon_buf +
2028                          curr_bss->ht_cap_offset);
2029
2030         if (curr_bss->bcn_ht_oper)
2031                 curr_bss->bcn_ht_oper = (struct ieee80211_ht_operation *)
2032                         (curr_bss->beacon_buf +
2033                          curr_bss->ht_info_offset);
2034
2035         if (curr_bss->bcn_bss_co_2040)
2036                 curr_bss->bcn_bss_co_2040 =
2037                         (curr_bss->beacon_buf + curr_bss->bss_co_2040_offset);
2038
2039         if (curr_bss->bcn_ext_cap)
2040                 curr_bss->bcn_ext_cap = curr_bss->beacon_buf +
2041                         curr_bss->ext_cap_offset;
2042 }
2043
2044 /*
2045  * This function frees the current BSS descriptor beacon buffer.
2046  */
2047 void
2048 mwifiex_free_curr_bcn(struct mwifiex_private *priv)
2049 {
2050         kfree(priv->curr_bcn_buf);
2051         priv->curr_bcn_buf = NULL;
2052 }