Merge tag 'sound-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
[~shefty/rdma-dev.git] / arch / arm / boot / dts / at91sam9x5.dtsi
index 0beff720caf9506e599d0c8823ab72ae943a4634..40ac3a4eb1abc80a3560fbf6e33183bdd9dd5e72 100644 (file)
                                interrupts = <21 4 0>;
                        };
 
-                       pioA: gpio@fffff400 {
-                               compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
-                               reg = <0xfffff400 0x100>;
-                               interrupts = <2 4 1>;
-                               #gpio-cells = <2>;
-                               gpio-controller;
-                               interrupt-controller;
-                               #interrupt-cells = <2>;
-                       };
+                       pinctrl@fffff400 {
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
+                               ranges = <0xfffff400 0xfffff400 0x800>;
+
+                               /* shared pinctrl settings */
+                               dbgu {
+                                       pinctrl_dbgu: dbgu-0 {
+                                               atmel,pins =
+                                                       <0 9 0x1 0x0    /* PA9 periph A */
+                                                        0 10 0x1 0x1>; /* PA10 periph A with pullup */
+                                       };
+                               };
 
-                       pioB: gpio@fffff600 {
-                               compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
-                               reg = <0xfffff600 0x100>;
-                               interrupts = <2 4 1>;
-                               #gpio-cells = <2>;
-                               gpio-controller;
-                               interrupt-controller;
-                               #interrupt-cells = <2>;
+                               usart0 {
+                                       pinctrl_usart0: usart0-0 {
+                                               atmel,pins =
+                                                       <0 0 0x1 0x1    /* PA0 periph A with pullup */
+                                                        0 1 0x1 0x0>;  /* PA1 periph A */
+                                       };
+
+                                       pinctrl_usart0_rts: usart0_rts-0 {
+                                               atmel,pins =
+                                                       <0 2 0x1 0x0>;  /* PA2 periph A */
+                                       };
+
+                                       pinctrl_usart0_cts: usart0_cts-0 {
+                                               atmel,pins =
+                                                       <0 3 0x1 0x0>;  /* PA3 periph A */
+                                       };
+                               };
+
+                               usart1 {
+                                       pinctrl_usart1: usart1-0 {
+                                               atmel,pins =
+                                                       <0 5 0x1 0x1    /* PA5 periph A with pullup */
+                                                        0 6 0x1 0x0>;  /* PA6 periph A */
+                                       };
+
+                                       pinctrl_usart1_rts: usart1_rts-0 {
+                                               atmel,pins =
+                                                       <3 27 0x3 0x0>; /* PC27 periph C */
+                                       };
+
+                                       pinctrl_usart1_cts: usart1_cts-0 {
+                                               atmel,pins =
+                                                       <3 28 0x3 0x0>; /* PC28 periph C */
+                                       };
+                               };
+
+                               usart2 {
+                                       pinctrl_usart2: usart2-0 {
+                                               atmel,pins =
+                                                       <0 7 0x1 0x1    /* PA7 periph A with pullup */
+                                                        0 8 0x1 0x0>;  /* PA8 periph A */
+                                       };
+
+                                       pinctrl_uart2_rts: uart2_rts-0 {
+                                               atmel,pins =
+                                                       <0 0 0x2 0x0>;  /* PB0 periph B */
+                                       };
+
+                                       pinctrl_uart2_cts: uart2_cts-0 {
+                                               atmel,pins =
+                                                       <0 1 0x2 0x0>;  /* PB1 periph B */
+                                       };
+                               };
+
+                               usart3 {
+                                       pinctrl_uart3: usart3-0 {
+                                               atmel,pins =
+                                                       <3 23 0x2 0x1   /* PC22 periph B with pullup */
+                                                        3 23 0x2 0x0>; /* PC23 periph B */
+                                       };
+
+                                       pinctrl_usart3_rts: usart3_rts-0 {
+                                               atmel,pins =
+                                                       <3 24 0x2 0x0>; /* PC24 periph B */
+                                       };
+
+                                       pinctrl_usart3_cts: usart3_cts-0 {
+                                               atmel,pins =
+                                                       <3 25 0x2 0x0>; /* PC25 periph B */
+                                       };
+                               };
+
+                               uart0 {
+                                       pinctrl_uart0: uart0-0 {
+                                               atmel,pins =
+                                                       <3 8 0x3 0x0    /* PC8 periph C */
+                                                        3 9 0x3 0x1>;  /* PC9 periph C with pullup */
+                                       };
+                               };
+
+                               uart1 {
+                                       pinctrl_uart1: uart1-0 {
+                                               atmel,pins =
+                                                       <3 16 0x3 0x0   /* PC16 periph C */
+                                                        3 17 0x3 0x1>; /* PC17 periph C with pullup */
+                                       };
+                               };
+
+                               nand {
+                                       pinctrl_nand: nand-0 {
+                                               atmel,pins =
+                                                       <3 4 0x0 0x1    /* PD5 gpio RDY pin pull_up */
+                                                        3 5 0x0 0x1>;  /* PD4 gpio enable pin pull_up */
+                                       };
+                               };
+
+                               macb0 {
+                                       pinctrl_macb0_rmii: macb0_rmii-0 {
+                                               atmel,pins =
+                                                       <1 0 0x1 0x0    /* PB0 periph A */
+                                                        1 1 0x1 0x0    /* PB1 periph A */
+                                                        1 2 0x1 0x0    /* PB2 periph A */
+                                                        1 3 0x1 0x0    /* PB3 periph A */
+                                                        1 4 0x1 0x0    /* PB4 periph A */
+                                                        1 5 0x1 0x0    /* PB5 periph A */
+                                                        1 6 0x1 0x0    /* PB6 periph A */
+                                                        1 7 0x1 0x0    /* PB7 periph A */
+                                                        1 9 0x1 0x0    /* PB9 periph A */
+                                                        1 10 0x1 0x0>; /* PB10 periph A */
+                                       };
+
+                                       pinctrl_macb0_rmii_mii: macb0_rmii_mii-0 {
+                                               atmel,pins =
+                                                       <1 8 0x1 0x0    /* PA8 periph A */
+                                                        1 11 0x1 0x0   /* PA11 periph A */
+                                                        1 12 0x1 0x0   /* PA12 periph A */
+                                                        1 13 0x1 0x0   /* PA13 periph A */
+                                                        1 14 0x1 0x0   /* PA14 periph A */
+                                                        1 15 0x1 0x0   /* PA15 periph A */
+                                                        1 16 0x1 0x0   /* PA16 periph A */
+                                                        1 17 0x1 0x0>; /* PA17 periph A */
+                                       };
+                               };
+
+                               mmc0 {
+                                       pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 {
+                                               atmel,pins =
+                                                       <0 17 0x1 0x0   /* PA17 periph A */
+                                                        0 16 0x1 0x1   /* PA16 periph A with pullup */
+                                                        0 15 0x1 0x1>; /* PA15 periph A with pullup */
+                                       };
+
+                                       pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+                                               atmel,pins =
+                                                       <0 18 0x1 0x1   /* PA18 periph A with pullup */
+                                                        0 19 0x1 0x1   /* PA19 periph A with pullup */
+                                                        0 20 0x1 0x1>; /* PA20 periph A with pullup */
+                                       };
+                               };
+
+                               mmc1 {
+                                       pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 {
+                                               atmel,pins =
+                                                       <0 13 0x2 0x0   /* PA13 periph B */
+                                                        0 12 0x2 0x1   /* PA12 periph B with pullup */
+                                                        0 11 0x2 0x1>; /* PA11 periph B with pullup */
+                                       };
+
+                                       pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 {
+                                               atmel,pins =
+                                                       <0 2 0x2 0x1    /* PA2 periph B with pullup */
+                                                        0 3 0x2 0x1    /* PA3 periph B with pullup */
+                                                        0 4 0x2 0x1>;  /* PA4 periph B with pullup */
+                                       };
+                               };
+
+                               pioA: gpio@fffff400 {
+                                       compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+                                       reg = <0xfffff400 0x200>;
+                                       interrupts = <2 4 1>;
+                                       #gpio-cells = <2>;
+                                       gpio-controller;
+                                       interrupt-controller;
+                                       #interrupt-cells = <2>;
+                               };
+
+                               pioB: gpio@fffff600 {
+                                       compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+                                       reg = <0xfffff600 0x200>;
+                                       interrupts = <2 4 1>;
+                                       #gpio-cells = <2>;
+                                       gpio-controller;
+                                       #gpio-lines = <19>;
+                                       interrupt-controller;
+                                       #interrupt-cells = <2>;
+                               };
+
+                               pioC: gpio@fffff800 {
+                                       compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+                                       reg = <0xfffff800 0x200>;
+                                       interrupts = <3 4 1>;
+                                       #gpio-cells = <2>;
+                                       gpio-controller;
+                                       interrupt-controller;
+                                       #interrupt-cells = <2>;
+                               };
+
+                               pioD: gpio@fffffa00 {
+                                       compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+                                       reg = <0xfffffa00 0x200>;
+                                       interrupts = <3 4 1>;
+                                       #gpio-cells = <2>;
+                                       gpio-controller;
+                                       #gpio-lines = <22>;
+                                       interrupt-controller;
+                                       #interrupt-cells = <2>;
+                               };
                        };
 
-                       pioC: gpio@fffff800 {
-                               compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
-                               reg = <0xfffff800 0x100>;
-                               interrupts = <3 4 1>;
-                               #gpio-cells = <2>;
-                               gpio-controller;
-                               interrupt-controller;
-                               #interrupt-cells = <2>;
+                       mmc0: mmc@f0008000 {
+                               compatible = "atmel,hsmci";
+                               reg = <0xf0008000 0x600>;
+                               interrupts = <12 4 0>;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               status = "disabled";
                        };
 
-                       pioD: gpio@fffffa00 {
-                               compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
-                               reg = <0xfffffa00 0x100>;
-                               interrupts = <3 4 1>;
-                               #gpio-cells = <2>;
-                               gpio-controller;
-                               interrupt-controller;
-                               #interrupt-cells = <2>;
+                       mmc1: mmc@f000c000 {
+                               compatible = "atmel,hsmci";
+                               reg = <0xf000c000 0x600>;
+                               interrupts = <26 4 0>;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               status = "disabled";
                        };
 
                        dbgu: serial@fffff200 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0xfffff200 0x200>;
                                interrupts = <1 4 7>;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&pinctrl_dbgu>;
                                status = "disabled";
                        };
 
                                interrupts = <5 4 5>;
                                atmel,use-dma-rx;
                                atmel,use-dma-tx;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&pinctrl_usart0>;
                                status = "disabled";
                        };
 
                                interrupts = <6 4 5>;
                                atmel,use-dma-rx;
                                atmel,use-dma-tx;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&pinctrl_usart1>;
                                status = "disabled";
                        };
 
                                interrupts = <7 4 5>;
                                atmel,use-dma-rx;
                                atmel,use-dma-tx;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&pinctrl_usart2>;
                                status = "disabled";
                        };
 
                                compatible = "cdns,at32ap7000-macb", "cdns,macb";
                                reg = <0xf802c000 0x100>;
                                interrupts = <24 4 3>;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&pinctrl_macb0_rmii>;
                                status = "disabled";
                        };
 
                              >;
                        atmel,nand-addr-offset = <21>;
                        atmel,nand-cmd-offset = <22>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&pinctrl_nand>;
                        gpios = <&pioD 5 0
                                 &pioD 4 0
                                 0