ARM: mmp: enable display in ttc_dkb
[~shefty/rdma-dev.git] / arch / arm / mach-mmp / ttc_dkb.c
index ce55fd8821c40f3bdff6bd757ef9bc47af5b32c5..49b3cf9b6e6012843b1919ddd4f3de18e83be00e 100644 (file)
@@ -19,6 +19,8 @@
 #include <linux/gpio.h>
 #include <linux/mfd/88pm860x.h>
 #include <linux/platform_data/mv_usb.h>
+#include <linux/spi/spi.h>
+#include <linux/delay.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -184,6 +186,92 @@ static struct pxa3xx_nand_platform_data dkb_nand_info = {
 };
 #endif
 
+#ifdef CONFIG_MMP_DISP
+/* path config */
+#define CFG_IOPADMODE(iopad)   (iopad)  /* 0x0 ~ 0xd */
+#define SCLK_SOURCE_SELECT(x)  (x << 30) /* 0x0 ~ 0x3 */
+/* link config */
+#define CFG_DUMBMODE(mode)     (mode << 28) /* 0x0 ~ 0x6*/
+#define CFG_GRA_SWAPRB(x)      (x << 0) /* 1: rbswap enabled */
+static struct mmp_mach_path_config dkb_disp_config[] = {
+       [0] = {
+               .name = "mmp-parallel",
+               .overlay_num = 2,
+               .output_type = PATH_OUT_PARALLEL,
+               .path_config = CFG_IOPADMODE(0x1)
+                       | SCLK_SOURCE_SELECT(0x1),
+               .link_config = CFG_DUMBMODE(0x2)
+                       | CFG_GRA_SWAPRB(0x1),
+       },
+};
+
+static struct mmp_mach_plat_info dkb_disp_info = {
+       .name = "mmp-disp",
+       .clk_name = "disp0",
+       .path_num = 1,
+       .paths = dkb_disp_config,
+};
+
+static struct mmp_buffer_driver_mach_info dkb_fb_info = {
+       .name = "mmp-fb",
+       .path_name = "mmp-parallel",
+       .overlay_id = 0,
+       .dmafetch_id = 1,
+       .default_pixfmt = PIXFMT_RGB565,
+};
+
+static void dkb_tpo_panel_power(int on)
+{
+       int err;
+       u32 spi_reset = mfp_to_gpio(MFP_PIN_GPIO106);
+
+       if (on) {
+               err = gpio_request(spi_reset, "TPO_LCD_SPI_RESET");
+               if (err) {
+                       pr_err("failed to request GPIO for TPO LCD RESET\n");
+                       return;
+               }
+               gpio_direction_output(spi_reset, 0);
+               udelay(100);
+               gpio_set_value(spi_reset, 1);
+               gpio_free(spi_reset);
+       } else {
+               err = gpio_request(spi_reset, "TPO_LCD_SPI_RESET");
+               if (err) {
+                       pr_err("failed to request LCD RESET gpio\n");
+                       return;
+               }
+               gpio_set_value(spi_reset, 0);
+               gpio_free(spi_reset);
+       }
+}
+
+static struct mmp_mach_panel_info dkb_tpo_panel_info = {
+       .name = "tpo-hvga",
+       .plat_path_name = "mmp-parallel",
+       .plat_set_onoff = dkb_tpo_panel_power,
+};
+
+static struct spi_board_info spi_board_info[] __initdata = {
+       {
+               .modalias       = "tpo-hvga",
+               .platform_data  = &dkb_tpo_panel_info,
+               .bus_num        = 5,
+       }
+};
+
+static void __init add_disp(void)
+{
+       pxa_register_device(&pxa910_device_disp,
+               &dkb_disp_info, sizeof(dkb_disp_info));
+       spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
+       pxa_register_device(&pxa910_device_fb,
+               &dkb_fb_info, sizeof(dkb_fb_info));
+       pxa_register_device(&pxa910_device_panel,
+               &dkb_tpo_panel_info, sizeof(dkb_tpo_panel_info));
+}
+#endif
+
 static void __init ttc_dkb_init(void)
 {
        mfp_config(ARRAY_AND_SIZE(ttc_dkb_pin_config));
@@ -212,6 +300,10 @@ static void __init ttc_dkb_init(void)
        pxa168_device_u2ootg.dev.platform_data = &ttc_usb_pdata;
        platform_device_register(&pxa168_device_u2ootg);
 #endif
+
+#ifdef CONFIG_MMP_DISP
+       add_disp();
+#endif
 }
 
 MACHINE_START(TTC_DKB, "PXA910-based TTC_DKB Development Platform")