]> git.openfabrics.org - ~shefty/rdma-dev.git/blobdiff - drivers/regulator/max1586.c
Merge remote-tracking branch 'regulator/topic/max1586' into regulator-next
[~shefty/rdma-dev.git] / drivers / regulator / max1586.c
index 3a035ece83c1de49b7fea9d20e0eff134fcbf577..8c5a54f541b50964567ba739a128b0ae59ec286a 100644 (file)
@@ -44,6 +44,9 @@ struct max1586_data {
        unsigned int min_uV;
        unsigned int max_uV;
 
+       unsigned int v3_curr_sel;
+       unsigned int v6_curr_sel;
+
        struct regulator_dev *rdev[0];
 };
 
@@ -63,31 +66,60 @@ static int v6_voltages_uv[] = { 1, 1800000, 2500000, 3000000 };
  * R24 and R25=100kOhm as described in the data sheet.
  * The gain is approximately: 1 + R24/R25 + R24/185.5kOhm
  */
+static int max1586_v3_get_voltage_sel(struct regulator_dev *rdev)
+{
+       struct max1586_data *max1586 = rdev_get_drvdata(rdev);
+
+       return max1586->v3_curr_sel;
+}
+
 static int max1586_v3_set_voltage_sel(struct regulator_dev *rdev,
                                      unsigned selector)
 {
        struct max1586_data *max1586 = rdev_get_drvdata(rdev);
        struct i2c_client *client = max1586->client;
+       int ret;
        u8 v3_prog;
 
        dev_dbg(&client->dev, "changing voltage v3 to %dmv\n",
                regulator_list_voltage_linear(rdev, selector) / 1000);
 
        v3_prog = I2C_V3_SELECT | (u8) selector;
-       return i2c_smbus_write_byte(client, v3_prog);
+       ret = i2c_smbus_write_byte(client, v3_prog);
+       if (ret)
+               return ret;
+
+       max1586->v3_curr_sel = selector;
+
+       return 0;
+}
+
+static int max1586_v6_get_voltage_sel(struct regulator_dev *rdev)
+{
+       struct max1586_data *max1586 = rdev_get_drvdata(rdev);
+
+       return max1586->v6_curr_sel;
 }
 
 static int max1586_v6_set_voltage_sel(struct regulator_dev *rdev,
                                      unsigned int selector)
 {
-       struct i2c_client *client = rdev_get_drvdata(rdev);
+       struct max1586_data *max1586 = rdev_get_drvdata(rdev);
+       struct i2c_client *client = max1586->client;
        u8 v6_prog;
+       int ret;
 
        dev_dbg(&client->dev, "changing voltage v6 to %dmv\n",
                rdev->desc->volt_table[selector] / 1000);
 
        v6_prog = I2C_V6_SELECT | (u8) selector;
-       return i2c_smbus_write_byte(client, v6_prog);
+       ret = i2c_smbus_write_byte(client, v6_prog);
+       if (ret)
+               return ret;
+
+       max1586->v6_curr_sel = selector;
+
+       return 0;
 }
 
 /*
@@ -95,12 +127,14 @@ static int max1586_v6_set_voltage_sel(struct regulator_dev *rdev,
  * the set up value.
  */
 static struct regulator_ops max1586_v3_ops = {
+       .get_voltage_sel = max1586_v3_get_voltage_sel,
        .set_voltage_sel = max1586_v3_set_voltage_sel,
        .list_voltage = regulator_list_voltage_linear,
        .map_voltage = regulator_map_voltage_linear,
 };
 
 static struct regulator_ops max1586_v6_ops = {
+       .get_voltage_sel = max1586_v6_get_voltage_sel,
        .set_voltage_sel = max1586_v6_set_voltage_sel,
        .list_voltage = regulator_list_voltage_table,
 };
@@ -148,6 +182,10 @@ static int max1586_pmic_probe(struct i2c_client *client,
        max1586->min_uV = MAX1586_V3_MIN_UV / 1000 * pdata->v3_gain / 1000;
        max1586->max_uV = MAX1586_V3_MAX_UV / 1000 * pdata->v3_gain / 1000;
 
+       /* Set curr_sel to default voltage on power-up */
+       max1586->v3_curr_sel = 24; /* 1.3V */
+       max1586->v6_curr_sel = 0;
+
        rdev = max1586->rdev;
        for (i = 0; i < pdata->num_subdevs && i <= MAX1586_V6; i++) {
                id = pdata->subdevs[i].id;