--- /dev/null
+What: /sys/devices/cpu/events/
+ /sys/devices/cpu/events/branch-misses
+ /sys/devices/cpu/events/cache-references
+ /sys/devices/cpu/events/cache-misses
+ /sys/devices/cpu/events/stalled-cycles-frontend
+ /sys/devices/cpu/events/branch-instructions
+ /sys/devices/cpu/events/stalled-cycles-backend
+ /sys/devices/cpu/events/instructions
+ /sys/devices/cpu/events/cpu-cycles
+
+Date: 2013/01/08
+
+Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org>
+
+Description: Generic performance monitoring events
+
+ A collection of performance monitoring events that may be
+ supported by many/most CPUs. These events can be monitored
+ using the 'perf(1)' tool.
+
+ The contents of each file would look like:
+
+ event=0xNNNN
+
+ where 'N' is a hex digit and the number '0xNNNN' shows the
+ "raw code" for the perf event identified by the file's
+ "basename".
+
+
+What: /sys/devices/cpu/events/PM_LD_MISS_L1
+ /sys/devices/cpu/events/PM_LD_REF_L1
+ /sys/devices/cpu/events/PM_CYC
+ /sys/devices/cpu/events/PM_BRU_FIN
+ /sys/devices/cpu/events/PM_GCT_NOSLOT_CYC
+ /sys/devices/cpu/events/PM_BRU_MPRED
+ /sys/devices/cpu/events/PM_INST_CMPL
+ /sys/devices/cpu/events/PM_CMPLU_STALL
+
+Date: 2013/01/08
+
+Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org>
+ Linux Powerpc mailing list <linuxppc-dev@ozlabs.org>
+
+Description: POWER-systems specific performance monitoring events
+
+ A collection of performance monitoring events that may be
+ supported by the POWER CPU. These events can be monitored
+ using the 'perf(1)' tool.
+
+ These events may not be supported by other CPUs.
+
+ The contents of each file would look like:
+
+ event=0xNNNN
+
+ where 'N' is a hex digit and the number '0xNNNN' shows the
+ "raw code" for the perf event identified by the file's
+ "basename".
+
+ Further, multiple terms like 'event=0xNNNN' can be specified
+ and separated with comma. All available terms are defined in
+ the /sys/bus/event_source/devices/<dev>/format file.
returns as soon as it finds any constraint that doesn't allow the
call to succeed.
-4.2.3 pci_disable_msi
+4.2.3 pci_enable_msi_block_auto
+
+int pci_enable_msi_block_auto(struct pci_dev *dev, unsigned int *count)
+
+This variation on pci_enable_msi() call allows a device driver to request
+the maximum possible number of MSIs. The MSI specification only allows
+interrupts to be allocated in powers of two, up to a maximum of 2^5 (32).
+
+If this function returns a positive number, it indicates that it has
+succeeded and the returned value is the number of allocated interrupts. In
+this case, the function enables MSI on this device and updates dev->irq to
+be the lowest of the new interrupts assigned to it. The other interrupts
+assigned to the device are in the range dev->irq to dev->irq + returned
+value - 1.
+
+If this function returns a negative number, it indicates an error and
+the driver should not attempt to request any more MSI interrupts for
+this device.
+
+If the device driver needs to know the number of interrupts the device
+supports it can pass the pointer count where that number is stored. The
+device driver must decide what action to take if pci_enable_msi_block_auto()
+succeeds, but returns a value less than the number of interrupts supported.
+If the device driver does not need to know the number of interrupts
+supported, it can set the pointer count to NULL.
+
+4.2.4 pci_disable_msi
void pci_disable_msi(struct pci_dev *dev)
This function should be used to undo the effect of pci_enable_msi() or
-pci_enable_msi_block(). Calling it restores dev->irq to the pin-based
-interrupt number and frees the previously allocated message signaled
-interrupt(s). The interrupt may subsequently be assigned to another
-device, so drivers should not cache the value of dev->irq.
+pci_enable_msi_block() or pci_enable_msi_block_auto(). Calling it restores
+dev->irq to the pin-based interrupt number and frees the previously
+allocated message signaled interrupt(s). The interrupt may subsequently be
+assigned to another device, so drivers should not cache the value of
+dev->irq.
Before calling this function, a device driver must always call free_irq()
on any interrupt for which it previously called request_irq().
the given new value. It returns the old value that the atomic variable v had
just before the operation.
+atomic_xchg requires explicit memory barriers around the operation.
+
int atomic_cmpxchg(atomic_t *v, int old, int new);
This performs an atomic compare exchange operation on the atomic value v,
1.2.0 Handle creation of arrays that contain failed devices.
1.3.0 Added support for RAID 10
1.3.1 Allow device replacement/rebuild for RAID 10
+1.3.2 Fix/improve redundancy checking for RAID10
real-time workloads. It can also improve energy
efficiency for asymmetric multiprocessors.
- rcu_nocbs_poll [KNL,BOOT]
+ rcu_nocb_poll [KNL,BOOT]
Rather than requiring that offloaded CPUs
(specified by rcu_nocbs= above) explicitly
awaken the corresponding "rcuoN" kthreads,
xchg();
cmpxchg();
+ atomic_xchg();
atomic_cmpxchg();
atomic_inc_return();
atomic_dec_return();
# cat buffer_size_kb
85
+Snapshot
+--------
+CONFIG_TRACER_SNAPSHOT makes a generic snapshot feature
+available to all non latency tracers. (Latency tracers which
+record max latency, such as "irqsoff" or "wakeup", can't use
+this feature, since those are already using the snapshot
+mechanism internally.)
+
+Snapshot preserves a current trace buffer at a particular point
+in time without stopping tracing. Ftrace swaps the current
+buffer with a spare buffer, and tracing continues in the new
+current (=previous spare) buffer.
+
+The following debugfs files in "tracing" are related to this
+feature:
+
+ snapshot:
+
+ This is used to take a snapshot and to read the output
+ of the snapshot. Echo 1 into this file to allocate a
+ spare buffer and to take a snapshot (swap), then read
+ the snapshot from this file in the same format as
+ "trace" (described above in the section "The File
+ System"). Both reads snapshot and tracing are executable
+ in parallel. When the spare buffer is allocated, echoing
+ 0 frees it, and echoing else (positive) values clear the
+ snapshot contents.
+ More details are shown in the table below.
+
+ status\input | 0 | 1 | else |
+ --------------+------------+------------+------------+
+ not allocated |(do nothing)| alloc+swap | EINVAL |
+ --------------+------------+------------+------------+
+ allocated | free | swap | clear |
+ --------------+------------+------------+------------+
+
+Here is an example of using the snapshot feature.
+
+ # echo 1 > events/sched/enable
+ # echo 1 > snapshot
+ # cat snapshot
+# tracer: nop
+#
+# entries-in-buffer/entries-written: 71/71 #P:8
+#
+# _-----=> irqs-off
+# / _----=> need-resched
+# | / _---=> hardirq/softirq
+# || / _--=> preempt-depth
+# ||| / delay
+# TASK-PID CPU# |||| TIMESTAMP FUNCTION
+# | | | |||| | |
+ <idle>-0 [005] d... 2440.603828: sched_switch: prev_comm=swapper/5 prev_pid=0 prev_prio=120 prev_state=R ==> next_comm=snapshot-test-2 next_pid=2242 next_prio=120
+ sleep-2242 [005] d... 2440.603846: sched_switch: prev_comm=snapshot-test-2 prev_pid=2242 prev_prio=120 prev_state=R ==> next_comm=kworker/5:1 next_pid=60 next_prio=120
+[...]
+ <idle>-0 [002] d... 2440.707230: sched_switch: prev_comm=swapper/2 prev_pid=0 prev_prio=120 prev_state=R ==> next_comm=snapshot-test-2 next_pid=2229 next_prio=120
+
+ # cat trace
+# tracer: nop
+#
+# entries-in-buffer/entries-written: 77/77 #P:8
+#
+# _-----=> irqs-off
+# / _----=> need-resched
+# | / _---=> hardirq/softirq
+# || / _--=> preempt-depth
+# ||| / delay
+# TASK-PID CPU# |||| TIMESTAMP FUNCTION
+# | | | |||| | |
+ <idle>-0 [007] d... 2440.707395: sched_switch: prev_comm=swapper/7 prev_pid=0 prev_prio=120 prev_state=R ==> next_comm=snapshot-test-2 next_pid=2243 next_prio=120
+ snapshot-test-2-2229 [002] d... 2440.707438: sched_switch: prev_comm=snapshot-test-2 prev_pid=2229 prev_prio=120 prev_state=S ==> next_comm=swapper/2 next_pid=0 next_prio=120
+[...]
+
+
+If you try to use this snapshot feature when current tracer is
+one of the latency tracers, you will get the following results.
+
+ # echo wakeup > current_tracer
+ # echo 1 > snapshot
+bash: echo: write error: Device or resource busy
+ # cat snapshot
+cat: snapshot: Device or resource busy
+
-----------
More details can be found in the source code, in the
Protocol 2.11: (Kernel 3.6) Added a field for offset of EFI handover
protocol entry point.
-Protocol 2.12: (Kernel 3.9) Added the xloadflags field and extension fields
+Protocol 2.12: (Kernel 3.8) Added the xloadflags field and extension fields
to struct boot_params for for loading bzImage and ramdisk
above 4G in 64bit.
F Special (0xFF = undefined)
10 Reserved
11 Minimal Linux Bootloader <http://sebastian-plotz.blogspot.de>
+ 12 OVMF UEFI virtualization stack
Please contact <hpa@zytor.com> if you need a bootloader ID
value assigned.
F: include/linux/async_tx.h
AT24 EEPROM DRIVER
-M: Wolfram Sang <w.sang@pengutronix.de>
+M: Wolfram Sang <wsa@the-dreams.de>
L: linux-i2c@vger.kernel.org
S: Maintained
F: drivers/misc/eeprom/at24.c
M: Haavard Skinnemoen <hskinnemoen@gmail.com>
M: Hans-Christian Egtvedt <egtvedt@samfundet.no>
W: http://www.atmel.com/products/AVR32/
-W: http://avr32linux.org/
+W: http://mirror.egtvedt.no/avr32linux.org/
W: http://avrfreaks.net/
S: Maintained
F: arch/avr32/
F: drivers/net/ethernet/i825xx/eexpress.*
ETHERNET BRIDGE
-M: Stephen Hemminger <shemminger@vyatta.com>
+M: Stephen Hemminger <stephen@networkplumber.org>
L: bridge@lists.linux-foundation.org
L: netdev@vger.kernel.org
W: http://www.linuxfoundation.org/en/Net:Bridge
F: drivers/i2c/i2c-stub.c
I2C SUBSYSTEM
-M: Wolfram Sang <w.sang@pengutronix.de>
+M: Wolfram Sang <wsa@the-dreams.de>
M: "Ben Dooks (embedded platforms)" <ben-linux@fluff.org>
L: linux-i2c@vger.kernel.org
W: http://i2c.wiki.kernel.org/
-T: quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-i2c/
-T: git git://git.pengutronix.de/git/wsa/linux.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git
S: Maintained
F: Documentation/i2c/
F: drivers/i2c/
MARVELL GIGABIT ETHERNET DRIVERS (skge/sky2)
M: Mirko Lindner <mlindner@marvell.com>
-M: Stephen Hemminger <shemminger@vyatta.com>
+M: Stephen Hemminger <stephen@networkplumber.org>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/ethernet/marvell/sk*
F: drivers/infiniband/hw/nes/
NETEM NETWORK EMULATOR
-M: Stephen Hemminger <shemminger@vyatta.com>
+M: Stephen Hemminger <stephen@networkplumber.org>
L: netem@lists.linux-foundation.org
S: Maintained
F: net/sched/sch_netem.c
S: Maintained
F: drivers/i2c/muxes/i2c-mux-pca9541.c
-PCA9564/PCA9665 I2C BUS DRIVER
-M: Wolfram Sang <w.sang@pengutronix.de>
-L: linux-i2c@vger.kernel.org
-S: Maintained
-F: drivers/i2c/algos/i2c-algo-pca.c
-F: drivers/i2c/busses/i2c-pca-*
-F: include/linux/i2c-algo-pca.h
-F: include/linux/i2c-pca-platform.h
-
PCDP - PRIMARY CONSOLE AND DEBUG PORT
M: Khalid Aziz <khalid@gonehiking.org>
S: Maintained
F: drivers/dma/dw_dmac.c
TIMEKEEPING, NTP
-M: John Stultz <johnstul@us.ibm.com>
+M: John Stultz <john.stultz@linaro.org>
M: Thomas Gleixner <tglx@linutronix.de>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers/core
S: Supported
F: sound/
SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT (ASoC)
-M: Liam Girdwood <lrg@ti.com>
+M: Liam Girdwood <lgirdwood@gmail.com>
M: Mark Brown <broonie@opensource.wolfsonmicro.com>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
VERSION = 3
PATCHLEVEL = 8
SUBLEVEL = 0
-EXTRAVERSION = -rc5
-NAME = Terrified Chipmunk
+EXTRAVERSION =
+NAME = Unicycling Gorilla
# *DOCUMENTATION*
# To see a list of typical targets execute "make help"
depends on KPROBES && HAVE_OPTPROBES
depends on !PREEMPT
+config KPROBES_ON_FTRACE
+ def_bool y
+ depends on KPROBES && HAVE_KPROBES_ON_FTRACE
+ depends on DYNAMIC_FTRACE_WITH_REGS
+ help
+ If function tracer is enabled and the arch supports full
+ passing of pt_regs to function tracing, then kprobes can
+ optimize on top of function tracing.
+
config UPROBES
bool "Transparent user-space probes (EXPERIMENTAL)"
depends on UPROBE_EVENT && PERF_EVENTS
config HAVE_OPTPROBES
bool
+config HAVE_KPROBES_ON_FTRACE
+ bool
+
config HAVE_NMI_WATCHDOG
bool
#
select HAVE_IDE
select HAVE_OPROFILE
select HAVE_SYSCALL_WRAPPERS
- select HAVE_IRQ_WORK
select HAVE_PCSPKR_PLATFORM
select HAVE_PERF_EVENTS
select HAVE_DMA_ATTRS
SYSCALL_DEFINE2(osf_getrusage, int, who, struct rusage32 __user *, ru)
{
struct rusage32 r;
+ cputime_t utime, stime;
if (who != RUSAGE_SELF && who != RUSAGE_CHILDREN)
return -EINVAL;
memset(&r, 0, sizeof(r));
switch (who) {
case RUSAGE_SELF:
- jiffies_to_timeval32(current->utime, &r.ru_utime);
- jiffies_to_timeval32(current->stime, &r.ru_stime);
+ task_cputime(current, &utime, &stime);
+ jiffies_to_timeval32(utime, &r.ru_utime);
+ jiffies_to_timeval32(stime, &r.ru_stime);
r.ru_minflt = current->min_flt;
r.ru_majflt = current->maj_flt;
break;
select HAVE_GENERIC_HARDIRQS
select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7))
select HAVE_IDE if PCI || ISA || PCMCIA
- select HAVE_IRQ_WORK
select HAVE_KERNEL_GZIP
select HAVE_KERNEL_LZMA
select HAVE_KERNEL_LZO
irq_set_chained_handler(irq, gic_handle_cascade_irq);
}
+static u8 gic_get_cpumask(struct gic_chip_data *gic)
+{
+ void __iomem *base = gic_data_dist_base(gic);
+ u32 mask, i;
+
+ for (i = mask = 0; i < 32; i += 4) {
+ mask = readl_relaxed(base + GIC_DIST_TARGET + i);
+ mask |= mask >> 16;
+ mask |= mask >> 8;
+ if (mask)
+ break;
+ }
+
+ if (!mask)
+ pr_crit("GIC CPU mask not found - kernel will fail to boot.\n");
+
+ return mask;
+}
+
static void __init gic_dist_init(struct gic_chip_data *gic)
{
unsigned int i;
/*
* Set all global interrupts to this CPU only.
*/
- cpumask = readl_relaxed(base + GIC_DIST_TARGET + 0);
+ cpumask = gic_get_cpumask(gic);
+ cpumask |= cpumask << 8;
+ cpumask |= cpumask << 16;
for (i = 32; i < gic_irqs; i += 4)
writel_relaxed(cpumask, base + GIC_DIST_TARGET + i * 4 / 4);
* Get what the GIC says our CPU mask is.
*/
BUG_ON(cpu >= NR_GIC_CPU_IF);
- cpu_mask = readl_relaxed(dist_base + GIC_DIST_TARGET + 0);
+ cpu_mask = gic_get_cpumask(gic);
gic_cpu_map[cpu] = cpu_mask;
/*
*/
#define PAGE_OFFSET UL(CONFIG_PAGE_OFFSET)
#define TASK_SIZE (UL(CONFIG_PAGE_OFFSET) - UL(0x01000000))
-#define TASK_UNMAPPED_BASE (UL(CONFIG_PAGE_OFFSET) / 3)
+#define TASK_UNMAPPED_BASE ALIGN(TASK_SIZE / 3, SZ_16M)
/*
* The maximum size of a 26-bit user space task.
#ifndef __ASSEMBLER__
unsigned int scu_get_core_count(void __iomem *);
-void scu_enable(void __iomem *);
int scu_power_mode(void __iomem *, unsigned int);
+
+#ifdef CONFIG_SMP
+void scu_enable(void __iomem *scu_base);
+#else
+static inline void scu_enable(void __iomem *scu_base) {}
+#endif
+
#endif
#endif
int scu_power_mode(void __iomem *scu_base, unsigned int mode)
{
unsigned int val;
- int cpu = cpu_logical_map(smp_processor_id());
+ int cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(smp_processor_id()), 0);
if (mode > 3 || mode == 1 || cpu > 3)
return -EINVAL;
select CPU_EXYNOS4210
select HAVE_SAMSUNG_KEYPAD if INPUT_KEYBOARD
select PINCTRL
- select PINCTRL_EXYNOS4
+ select PINCTRL_EXYNOS
select USE_OF
help
Machine support for Samsung Exynos4 machine with device tree enabled.
#include <asm/arch_timer.h>
#include <asm/cacheflush.h>
+#include <asm/cputype.h>
#include <asm/smp_plat.h>
#include <asm/smp_twd.h>
#include <asm/hardware/arm_timer.h>
void highbank_set_cpu_jump(int cpu, void *jump_addr)
{
- cpu = cpu_logical_map(cpu);
+ cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(cpu), 0);
writel(virt_to_phys(jump_addr), HB_JUMP_TABLE_VIRT(cpu));
__cpuc_flush_dcache_area(HB_JUMP_TABLE_VIRT(cpu), 16);
outer_clean_range(HB_JUMP_TABLE_PHYS(cpu),
static inline void highbank_set_core_pwr(void)
{
- int cpu = cpu_logical_map(smp_processor_id());
+ int cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(smp_processor_id()), 0);
if (scu_base_addr)
scu_power_mode(scu_base_addr, SCU_PM_POWEROFF);
else
static inline void highbank_clear_core_pwr(void)
{
- int cpu = cpu_logical_map(smp_processor_id());
+ int cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(smp_processor_id()), 0);
if (scu_base_addr)
scu_power_mode(scu_base_addr, SCU_PM_NORMAL);
else
/*
* Only define NR_IRQS if less than NR_IRQS_EB
*/
-#define NR_IRQS_EB (IRQ_EB_GIC_START + 96)
+#define NR_IRQS_EB (IRQ_EB_GIC_START + 128)
#if defined(CONFIG_MACH_REALVIEW_EB) \
&& (!defined(NR_IRQS) || (NR_IRQS < NR_IRQS_EB))
if (is_coherent || nommu())
addr = __alloc_simple_buffer(dev, size, gfp, &page);
- else if (gfp & GFP_ATOMIC)
+ else if (!(gfp & __GFP_WAIT))
addr = __alloc_from_pool(size, &page);
else if (!IS_ENABLED(CONFIG_CMA))
addr = __alloc_remap_buffer(dev, size, gfp, prot, &page, caller);
select HAVE_GENERIC_DMA_COHERENT
select HAVE_GENERIC_HARDIRQS
select HAVE_HW_BREAKPOINT if PERF_EVENTS
- select HAVE_IRQ_WORK
select HAVE_MEMBLOCK
select HAVE_PERF_EVENTS
select IRQ_DOMAIN
#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
+/* drivers/base/dma-mapping.c */
+extern int dma_common_mmap(struct device *dev, struct vm_area_struct *vma,
+ void *cpu_addr, dma_addr_t dma_addr, size_t size);
+extern int dma_common_get_sgtable(struct device *dev, struct sg_table *sgt,
+ void *cpu_addr, dma_addr_t dma_addr,
+ size_t size);
+
+#define dma_mmap_coherent(d, v, c, h, s) dma_common_mmap(d, v, c, h, s)
+#define dma_get_sgtable(d, t, v, h, s) dma_common_get_sgtable(d, t, v, h, s)
+
#endif /* __ASM_AVR32_DMA_MAPPING_H */
select HAVE_FUNCTION_TRACER
select HAVE_FUNCTION_TRACE_MCOUNT_TEST
select HAVE_IDE
- select HAVE_IRQ_WORK
select HAVE_KERNEL_GZIP if RAMKERNEL
select HAVE_KERNEL_BZIP2 if RAMKERNEL
select HAVE_KERNEL_LZMA if RAMKERNEL
select HAVE_GENERIC_HARDIRQS
select GENERIC_ATOMIC64
select GENERIC_IRQ_PROBE
- select IRQ_PER_CPU if SMP
select USE_GENERIC_SMP_HELPERS if SMP
select HAVE_NMI_WATCHDOG if NMI_WATCHDOG
select GENERIC_SMP_IDLE_THREAD
_dma_sync((dma_addr_t)vaddr, size, dir);
}
+/* drivers/base/dma-mapping.c */
+extern int dma_common_mmap(struct device *dev, struct vm_area_struct *vma,
+ void *cpu_addr, dma_addr_t dma_addr, size_t size);
+extern int dma_common_get_sgtable(struct device *dev, struct sg_table *sgt,
+ void *cpu_addr, dma_addr_t dma_addr,
+ size_t size);
+
+#define dma_mmap_coherent(d, v, c, h, s) dma_common_mmap(d, v, c, h, s)
+#define dma_get_sgtable(d, t, v, h, s) dma_common_get_sgtable(d, t, v, h, s)
+
#endif /* _BLACKFIN_DMA_MAPPING_H */
#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent((d), (s), (h), (f))
#define dma_free_noncoherent(d, s, v, h) dma_free_coherent((d), (s), (v), (h))
+/* Not supported for now */
+static inline int dma_mmap_coherent(struct device *dev,
+ struct vm_area_struct *vma, void *cpu_addr,
+ dma_addr_t dma_addr, size_t size)
+{
+ return -EINVAL;
+}
+
+static inline int dma_get_sgtable(struct device *dev, struct sg_table *sgt,
+ void *cpu_addr, dma_addr_t dma_addr,
+ size_t size)
+{
+ return -EINVAL;
+}
+
#endif /* _ASM_C6X_DMA_MAPPING_H */
{
}
+/* drivers/base/dma-mapping.c */
+extern int dma_common_mmap(struct device *dev, struct vm_area_struct *vma,
+ void *cpu_addr, dma_addr_t dma_addr, size_t size);
+extern int dma_common_get_sgtable(struct device *dev, struct sg_table *sgt,
+ void *cpu_addr, dma_addr_t dma_addr,
+ size_t size);
+
+#define dma_mmap_coherent(d, v, c, h, s) dma_common_mmap(d, v, c, h, s)
+#define dma_get_sgtable(d, t, v, h, s) dma_common_get_sgtable(d, t, v, h, s)
+
#endif
default y
select HAVE_IDE
select HAVE_ARCH_TRACEHOOK
- select HAVE_IRQ_WORK
select HAVE_PERF_EVENTS
select HAVE_UID16
select HAVE_GENERIC_HARDIRQS
flush_write_buffers();
}
+/* Not supported for now */
+static inline int dma_mmap_coherent(struct device *dev,
+ struct vm_area_struct *vma, void *cpu_addr,
+ dma_addr_t dma_addr, size_t size)
+{
+ return -EINVAL;
+}
+
+static inline int dma_get_sgtable(struct device *dev, struct sg_table *sgt,
+ void *cpu_addr, dma_addr_t dma_addr,
+ size_t size)
+{
+ return -EINVAL;
+}
+
#endif /* _ASM_DMA_MAPPING_H */
# select ARCH_WANT_OPTIONAL_GPIOLIB
# select ARCH_REQUIRE_GPIOLIB
# select HAVE_CLK
- # select IRQ_PER_CPU
# select GENERIC_PENDING_IRQ if SMP
- select HAVE_IRQ_WORK
select GENERIC_ATOMIC64
select HAVE_PERF_EVENTS
select HAVE_GENERIC_HARDIRQS
select ARCH_DISCARD_MEMBLOCK
select GENERIC_IRQ_PROBE
select GENERIC_PENDING_IRQ if SMP
- select IRQ_PER_CPU
select GENERIC_IRQ_SHOW
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARCH_HAVE_NMI_SAFE_CMPXCHG
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
- * If we have CONFIG_VIRT_CPU_ACCOUNTING, we measure cpu time in nsec.
+ * If we have CONFIG_VIRT_CPU_ACCOUNTING_NATIVE, we measure cpu time in nsec.
* Otherwise we measure cpu time in jiffies using the generic definitions.
*/
#ifndef __IA64_CPUTIME_H
#define __IA64_CPUTIME_H
-#ifndef CONFIG_VIRT_CPU_ACCOUNTING
-#include <asm-generic/cputime.h>
+#ifndef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
+#
include <asm-generic/cputime.h>
#else
-
-#include <linux/time.h>
-#include <linux/jiffies.h>
-#include <asm/processor.h>
-
-typedef u64 __nocast cputime_t;
-typedef u64 __nocast cputime64_t;
-
-#define cputime_one_jiffy jiffies_to_cputime(1)
-
-/*
- * Convert cputime <-> jiffies (HZ)
- */
-#define cputime_to_jiffies(__ct) \
- ((__force u64)(__ct) / (NSEC_PER_SEC / HZ))
-#define jiffies_to_cputime(__jif) \
- (__force cputime_t)((__jif) * (NSEC_PER_SEC / HZ))
-#define cputime64_to_jiffies64(__ct) \
- ((__force u64)(__ct) / (NSEC_PER_SEC / HZ))
-#define jiffies64_to_cputime64(__jif) \
- (__force cputime64_t)((__jif) * (NSEC_PER_SEC / HZ))
-
-/*
- * Convert cputime <-> microseconds
- */
-#define cputime_to_usecs(__ct) \
- ((__force u64)(__ct) / NSEC_PER_USEC)
-#define usecs_to_cputime(__usecs) \
- (__force cputime_t)((__usecs) * NSEC_PER_USEC)
-#define usecs_to_cputime64(__usecs) \
- (__force cputime64_t)((__usecs) * NSEC_PER_USEC)
-
-/*
- * Convert cputime <-> seconds
- */
-#define cputime_to_secs(__ct) \
- ((__force u64)(__ct) / NSEC_PER_SEC)
-#define secs_to_cputime(__secs) \
- (__force cputime_t)((__secs) * NSEC_PER_SEC)
-
-/*
- * Convert cputime <-> timespec (nsec)
- */
-static inline cputime_t timespec_to_cputime(const struct timespec *val)
-{
- u64 ret = val->tv_sec * NSEC_PER_SEC + val->tv_nsec;
- return (__force cputime_t) ret;
-}
-static inline void cputime_to_timespec(const cputime_t ct, struct timespec *val)
-{
- val->tv_sec = (__force u64) ct / NSEC_PER_SEC;
- val->tv_nsec = (__force u64) ct % NSEC_PER_SEC;
-}
-
-/*
- * Convert cputime <-> timeval (msec)
- */
-static inline cputime_t timeval_to_cputime(struct timeval *val)
-{
- u64 ret = val->tv_sec * NSEC_PER_SEC + val->tv_usec * NSEC_PER_USEC;
- return (__force cputime_t) ret;
-}
-static inline void cputime_to_timeval(const cputime_t ct, struct timeval *val)
-{
- val->tv_sec = (__force u64) ct / NSEC_PER_SEC;
- val->tv_usec = ((__force u64) ct % NSEC_PER_SEC) / NSEC_PER_USEC;
-}
-
-/*
- * Convert cputime <-> clock (USER_HZ)
- */
-#define cputime_to_clock_t(__ct) \
- ((__force u64)(__ct) / (NSEC_PER_SEC / USER_HZ))
-#define clock_t_to_cputime(__x) \
- (__force cputime_t)((__x) * (NSEC_PER_SEC / USER_HZ))
-
-/*
- * Convert cputime64 to clock.
- */
-#define cputime64_to_clock_t(__ct) \
- cputime_to_clock_t((__force cputime_t)__ct)
-
+# include <asm/processor.h>
+# include <asm-generic/cputime_nsecs.h>
extern void arch_vtime_task_switch(struct task_struct *tsk);
+#endif /* CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */
-#endif /* CONFIG_VIRT_CPU_ACCOUNTING */
#endif /* __IA64_CPUTIME_H */
mm_segment_t addr_limit; /* user-level address space limit */
int preempt_count; /* 0=premptable, <0=BUG; will also serve as bh-counter */
struct restart_block restart_block;
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
__u64 ac_stamp;
__u64 ac_leave;
__u64 ac_stime;
#define task_stack_page(tsk) ((void *)(tsk))
#define __HAVE_THREAD_FUNCTIONS
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
#define setup_thread_stack(p, org) \
*task_thread_info(p) = *task_thread_info(org); \
task_thread_info(p)->ac_stime = 0; \
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
/* read ar.itc in advance, and use it before leaving bank 0 */
#define XEN_ACCOUNT_GET_STAMP \
MOV_FROM_ITC(pUStk, p6, r20, r2);
DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
DEFINE(TI_CPU, offsetof(struct thread_info, cpu));
DEFINE(TI_PRE_COUNT, offsetof(struct thread_info, preempt_count));
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
DEFINE(TI_AC_STAMP, offsetof(struct thread_info, ac_stamp));
DEFINE(TI_AC_LEAVE, offsetof(struct thread_info, ac_leave));
DEFINE(TI_AC_STIME, offsetof(struct thread_info, ac_stime));
#endif
.global __paravirt_work_processed_syscall;
__paravirt_work_processed_syscall:
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
adds r2=PT(LOADRS)+16,r12
MOV_FROM_ITC(pUStk, p9, r22, r19) // fetch time at leave
adds r18=TI_FLAGS+IA64_TASK_SIZE,r13
ld8 r29=[r2],16 // M0|1 load cr.ipsr
ld8 r28=[r3],16 // M0|1 load cr.iip
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
(pUStk) add r14=TI_AC_LEAVE+IA64_TASK_SIZE,r13
;;
ld8 r30=[r2],16 // M0|1 load cr.ifs
ld8.fill r1=[r3],16 // M0|1 load r1
(pUStk) mov r17=1 // A
;;
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
(pUStk) st1 [r15]=r17 // M2|3
#else
(pUStk) st1 [r14]=r17 // M2|3
shr.u r18=r19,16 // I0|1 get byte size of existing "dirty" partition
COVER // B add current frame into dirty partition & set cr.ifs
;;
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
mov r19=ar.bsp // M2 get new backing store pointer
st8 [r14]=r22 // M save time at leave
mov f10=f0 // F clear f10
adds r16=PT(CR_IPSR)+16,r12
adds r17=PT(CR_IIP)+16,r12
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
.pred.rel.mutex pUStk,pKStk
MOV_FROM_PSR(pKStk, r22, r29) // M2 read PSR now that interrupts are disabled
MOV_FROM_ITC(pUStk, p9, r22, r29) // M fetch time at leave
;;
ld8.fill r12=[r16],16
ld8.fill r13=[r17],16
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
(pUStk) adds r3=TI_AC_LEAVE+IA64_TASK_SIZE,r18
#else
(pUStk) adds r18=IA64_TASK_THREAD_ON_USTACK_OFFSET,r18
;;
ld8 r20=[r16],16 // ar.fpsr
ld8.fill r15=[r17],16
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
(pUStk) adds r18=IA64_TASK_THREAD_ON_USTACK_OFFSET,r18 // deferred
#endif
;;
ld8.fill r2=[r17]
(pUStk) mov r17=1
;;
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
// mmi_ : ld8 st1 shr;; mmi_ : st8 st1 shr;;
// mib : mov add br -> mib : ld8 add br
// bbb_ : br nop cover;; mbb_ : mov br cover;;
nop.i 0
;;
mov ar.rsc=0 // M2 set enforced lazy mode, pl 0, LE, loadrs=0
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
MOV_FROM_ITC(p0, p6, r30, r23) // M get cycle for accounting
#else
nop.m 0
cmp.ne pKStk,pUStk=r0,r0 // A set pKStk <- 0, pUStk <- 1
br.call.sptk.many b7=ia64_syscall_setup // B
;;
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
// mov.m r30=ar.itc is called in advance
add r16=TI_AC_STAMP+IA64_TASK_SIZE,r2
add r17=TI_AC_LEAVE+IA64_TASK_SIZE,r2
sched_clock = ia64_native_sched_clock
#endif
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
GLOBAL_ENTRY(cycle_to_cputime)
alloc r16=ar.pfs,1,0,0,0
addl r8=THIS_CPU(ia64_cpu_info) + IA64_CPUINFO_NSEC_PER_CYC_OFFSET,r0
shrp r8=r9,r8,IA64_NSEC_PER_CYC_SHIFT
br.ret.sptk.many rp
END(cycle_to_cputime)
-#endif /* CONFIG_VIRT_CPU_ACCOUNTING */
+#endif /* CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */
#ifdef CONFIG_IA64_BRL_EMU
(p8) adds r28=16,r28 // A switch cr.iip to next bundle
(p9) adds r8=1,r8 // A increment ei to next slot
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
;;
mov b6=r30 // I0 setup syscall handler branch reg early
#else
//
///////////////////////////////////////////////////////////////////////
st1 [r16]=r0 // M2|3 clear current->thread.on_ustack flag
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
MOV_FROM_ITC(p0, p14, r30, r18) // M get cycle for accounting
#else
mov b6=r30 // I0 setup syscall handler branch reg early
cmp.eq p14,p0=r9,r0 // A are syscalls being traced/audited?
br.call.sptk.many b7=ia64_syscall_setup // B
1:
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
// mov.m r30=ar.itc is called in advance, and r13 is current
add r16=TI_AC_STAMP+IA64_TASK_SIZE,r13 // A
add r17=TI_AC_LEAVE+IA64_TASK_SIZE,r13 // A
DBG_FAULT(16)
FAULT(16)
-#if defined(CONFIG_VIRT_CPU_ACCOUNTING) && defined(__IA64_ASM_PARAVIRTUALIZED_NATIVE)
+#if defined(CONFIG_VIRT_CPU_ACCOUNTING_NATIVE) && defined(__IA64_ASM_PARAVIRTUALIZED_NATIVE)
/*
* There is no particular reason for this code to be here, other than
* that there happens to be space here that would go unused otherwise.
#include "entry.h"
#include "paravirt_inst.h"
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
/* read ar.itc in advance, and use it before leaving bank 0 */
#define ACCOUNT_GET_STAMP \
(pUStk) mov.m r20=ar.itc;
};
static struct clocksource *itc_clocksource;
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
#include <linux/kernel_stat.h>
account_system_time(tsk, 0, delta, delta);
}
+EXPORT_SYMBOL_GPL(vtime_account_system);
void vtime_account_idle(struct task_struct *tsk)
{
account_idle_time(vtime_delta(tsk));
}
-#endif /* CONFIG_VIRT_CPU_ACCOUNTING */
+#endif /* CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */
static irqreturn_t
timer_interrupt (int irq, void *dev_id)
#include <asm-generic/dma-mapping-broken.h>
#endif
+/* drivers/base/dma-mapping.c */
+extern int dma_common_mmap(struct device *dev, struct vm_area_struct *vma,
+ void *cpu_addr, dma_addr_t dma_addr, size_t size);
+extern int dma_common_get_sgtable(struct device *dev, struct sg_table *sgt,
+ void *cpu_addr, dma_addr_t dma_addr,
+ size_t size);
+
+#define dma_mmap_coherent(d, v, c, h, s) dma_common_mmap(d, v, c, h, s)
+#define dma_get_sgtable(d, t, v, h, s) dma_common_get_sgtable(d, t, v, h, s)
+
#endif /* _M68K_DMA_MAPPING_H */
#define start_thread(_regs, _pc, _usp) \
do { \
(_regs)->pc = (_pc); \
- ((struct switch_stack *)(_regs))[-1].a6 = 0; \
setframeformat(_regs); \
if (current->mm) \
(_regs)->d5 = current->mm->start_data; \
select HAVE_GENERIC_DMA_COHERENT
select HAVE_IDE
select HAVE_OPROFILE
- select HAVE_IRQ_WORK
select HAVE_PERF_EVENTS
select PERF_USE_VMALLOC
select HAVE_ARCH_KGDB
config SMP
bool "Multi-Processing support"
depends on SYS_SUPPORTS_SMP
- select IRQ_PER_CPU
select USE_GENERIC_SMP_HELPERS
help
This enables support for systems with more than one CPU. If you have
select SSB_DRIVER_EXTIF
select SSB_EMBEDDED
select SSB_B43_PCI_BRIDGE if PCI
+ select SSB_DRIVER_PCICORE if PCI
select SSB_PCICORE_HOSTMODE if PCI
select SSB_DRIVER_GPIO
+ select GPIOLIB
default y
help
Add support for old Broadcom BCM47xx boards with Sonics Silicon Backplane support.
select BCMA_HOST_PCI if PCI
select BCMA_DRIVER_PCI_HOSTMODE if PCI
select BCMA_DRIVER_GPIO
+ select GPIOLIB
default y
help
Add support for new Broadcom BCM47xx boards with Broadcom specific Advanced Microcontroller Bus.
* measurement, and debugging facilities.
*/
+#include <linux/compiler.h>
#include <linux/irqflags.h>
#include <asm/octeon/cvmx.h>
#include <asm/octeon/cvmx-l2c.h>
*/
static void fault_in(uint64_t addr, int len)
{
- volatile char *ptr;
- volatile char dummy;
+ char *ptr;
+
/*
* Adjust addr and length so we get all cache lines even for
* small ranges spanning two cache lines.
*/
len += addr & CVMX_CACHE_LINE_MASK;
addr &= ~CVMX_CACHE_LINE_MASK;
- ptr = (volatile char *)cvmx_phys_to_ptr(addr);
+ ptr = cvmx_phys_to_ptr(addr);
/*
* Invalidate L1 cache to make sure all loads result in data
* being in L2.
*/
CVMX_DCACHE_INVALIDATE;
while (len > 0) {
- dummy += *ptr;
+ ACCESS_ONCE(*ptr);
len -= CVMX_CACHE_LINE_SIZE;
ptr += CVMX_CACHE_LINE_SIZE;
}
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1995, 2003 by Ralf Baechle
- * Copyright (C) 1999 Silicon Graphics, Inc.
- */
-#ifndef __ASM_BREAK_H
-#define __ASM_BREAK_H
-
-/*
- * The following break codes are or were in use for specific purposes in
- * other MIPS operating systems. Linux/MIPS doesn't use all of them. The
- * unused ones are here as placeholders; we might encounter them in
- * non-Linux/MIPS object files or make use of them in the future.
- */
-#define BRK_USERBP 0 /* User bp (used by debuggers) */
-#define BRK_KERNELBP 1 /* Break in the kernel */
-#define BRK_ABORT 2 /* Sometimes used by abort(3) to SIGIOT */
-#define BRK_BD_TAKEN 3 /* For bd slot emulation - not implemented */
-#define BRK_BD_NOTTAKEN 4 /* For bd slot emulation - not implemented */
-#define BRK_SSTEPBP 5 /* User bp (used by debuggers) */
-#define BRK_OVERFLOW 6 /* Overflow check */
-#define BRK_DIVZERO 7 /* Divide by zero check */
-#define BRK_RANGE 8 /* Range error check */
-#define BRK_STACKOVERFLOW 9 /* For Ada stackchecking */
-#define BRK_NORLD 10 /* No rld found - not used by Linux/MIPS */
-#define _BRK_THREADBP 11 /* For threads, user bp (used by debuggers) */
-#define BRK_BUG 512 /* Used by BUG() */
-#define BRK_KDB 513 /* Used in KDB_ENTER() */
-#define BRK_MEMU 514 /* Used by FPU emulator */
-#define BRK_KPROBE_BP 515 /* Kprobe break */
-#define BRK_KPROBE_SSTEPBP 516 /* Kprobe single step software implementation */
-#define BRK_MULOVF 1023 /* Multiply overflow */
-
-#endif /* __ASM_BREAK_H */
#include <asm/mipsregs.h>
#define DSP_DEFAULT 0x00000000
-#define DSP_MASK 0x3ff
+#define DSP_MASK 0x3f
#define __enable_dsp_hazard() \
do { \
struct u_format u_format;
struct c_format c_format;
struct r_format r_format;
+ struct p_format p_format;
struct f_format f_format;
struct ma_format ma_format;
struct b_format b_format;
#define R10000_LLSC_WAR 0
#define MIPS34K_MISSED_ITLB_WAR 0
-#endif /* __ASM_MIPS_MACH_PNX8550_WAR_H */
+#endif /* __ASM_MIPS_MACH_PNX833X_WAR_H */
#else
#define pte_pfn(x) ((unsigned long)((x).pte >> _PFN_SHIFT))
#define pfn_pte(pfn, prot) __pte(((pfn) << _PFN_SHIFT) | pgprot_val(prot))
+#define pfn_pmd(pfn, prot) __pmd(((pfn) << _PFN_SHIFT) | pgprot_val(prot))
#endif
#define __pgd_offset(address) pgd_index(address)
header-y += auxvec.h
header-y += bitsperlong.h
+header-y += break.h
header-y += byteorder.h
header-y += cachectl.h
header-y += errno.h
--- /dev/null
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 2003 by Ralf Baechle
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ */
+#ifndef __ASM_BREAK_H
+#define __ASM_BREAK_H
+
+/*
+ * The following break codes are or were in use for specific purposes in
+ * other MIPS operating systems. Linux/MIPS doesn't use all of them. The
+ * unused ones are here as placeholders; we might encounter them in
+ * non-Linux/MIPS object files or make use of them in the future.
+ */
+#define BRK_USERBP 0 /* User bp (used by debuggers) */
+#define BRK_KERNELBP 1 /* Break in the kernel */
+#define BRK_ABORT 2 /* Sometimes used by abort(3) to SIGIOT */
+#define BRK_BD_TAKEN 3 /* For bd slot emulation - not implemented */
+#define BRK_BD_NOTTAKEN 4 /* For bd slot emulation - not implemented */
+#define BRK_SSTEPBP 5 /* User bp (used by debuggers) */
+#define BRK_OVERFLOW 6 /* Overflow check */
+#define BRK_DIVZERO 7 /* Divide by zero check */
+#define BRK_RANGE 8 /* Range error check */
+#define BRK_STACKOVERFLOW 9 /* For Ada stackchecking */
+#define BRK_NORLD 10 /* No rld found - not used by Linux/MIPS */
+#define _BRK_THREADBP 11 /* For threads, user bp (used by debuggers) */
+#define BRK_BUG 512 /* Used by BUG() */
+#define BRK_KDB 513 /* Used in KDB_ENTER() */
+#define BRK_MEMU 514 /* Used by FPU emulator */
+#define BRK_KPROBE_BP 515 /* Kprobe break */
+#define BRK_KPROBE_SSTEPBP 516 /* Kprobe single step software implementation */
+#define BRK_MULOVF 1023 /* Multiply overflow */
+
+#endif /* __ASM_BREAK_H */
#define MCOUNT_OFFSET_INSNS 4
#endif
+/* Arch override because MIPS doesn't need to run this from stop_machine() */
+void arch_ftrace_update_code(int command)
+{
+ ftrace_modify_all_code(command);
+}
+
/*
* Check if the address is in kernel space
*
return 0;
}
+#ifndef CONFIG_64BIT
+static int ftrace_modify_code_2(unsigned long ip, unsigned int new_code1,
+ unsigned int new_code2)
+{
+ int faulted;
+
+ safe_store_code(new_code1, ip, faulted);
+ if (unlikely(faulted))
+ return -EFAULT;
+ ip += 4;
+ safe_store_code(new_code2, ip, faulted);
+ if (unlikely(faulted))
+ return -EFAULT;
+ flush_icache_range(ip, ip + 8); /* original ip + 12 */
+ return 0;
+}
+#endif
+
/*
* The details about the calling site of mcount on MIPS
*
* needed.
*/
new = in_kernel_space(ip) ? INSN_NOP : INSN_B_1F;
-
+#ifdef CONFIG_64BIT
return ftrace_modify_code(ip, new);
+#else
+ /*
+ * On 32 bit MIPS platforms, gcc adds a stack adjust
+ * instruction in the delay slot after the branch to
+ * mcount and expects mcount to restore the sp on return.
+ * This is based on a legacy API and does nothing but
+ * waste instructions so it's being removed at runtime.
+ */
+ return ftrace_modify_code_2(ip, new, INSN_NOP);
+#endif
}
int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
PTR_L a5, PT_R9(sp)
PTR_L a6, PT_R10(sp)
PTR_L a7, PT_R11(sp)
- PTR_ADDIU sp, PT_SIZE
#else
- PTR_ADDIU sp, (PT_SIZE + 8)
+ PTR_ADDIU sp, PT_SIZE
#endif
.endm
.globl _mcount
_mcount:
b ftrace_stub
- nop
+ addiu sp,sp,8
+
+ /* When tracing is activated, it calls ftrace_caller+8 (aka here) */
lw t1, function_trace_stop
bnez t1, ftrace_stub
nop
printk(KERN_WARNING
"VPE loader: TC %d is already in use.\n",
- t->index);
+ v->tc->index);
return -ENOEXEC;
}
} else {
#endif
/* tell oprofile which irq to use */
- cp0_perfcount_irq = LTQ_PERF_IRQ;
+ cp0_perfcount_irq = irq_create_mapping(ltq_domain, LTQ_PERF_IRQ);
/*
* if the timer irq is not one of the mips irqs we need to
" .set noreorder \n"
" .align 3 \n"
"1: bnez %0, 1b \n"
-#if __SIZEOF_LONG__ == 4
+#if BITS_PER_LONG == 32
" subu %0, 1 \n"
#else
" dsubu %0, 1 \n"
EXPORT_SYMBOL(__ioremap);
EXPORT_SYMBOL(__iounmap);
-
-int __virt_addr_valid(const volatile void *kaddr)
-{
- return pfn_valid(PFN_DOWN(virt_to_phys(kaddr)));
-}
-EXPORT_SYMBOL_GPL(__virt_addr_valid);
return ret;
}
+
+int __virt_addr_valid(const volatile void *kaddr)
+{
+ return pfn_valid(PFN_DOWN(virt_to_phys(kaddr)));
+}
+EXPORT_SYMBOL_GPL(__virt_addr_valid);
void __init prom_init(void)
{
- int i, *argv, *envp; /* passed as 32 bit ptrs */
+ int *argv, *envp; /* passed as 32 bit ptrs */
struct psb_info *prom_infop;
+#ifdef CONFIG_SMP
+ int i;
+#endif
/* truncate to 32 bit and sign extend all args */
argv = (int *)(long)(int)fw_arg1;
#include <asm/mach-ath79/pci.h>
#define AR71XX_PCI_MEM_BASE 0x10000000
-#define AR71XX_PCI_MEM_SIZE 0x08000000
+#define AR71XX_PCI_MEM_SIZE 0x07000000
#define AR71XX_PCI_WIN0_OFFS 0x10000000
#define AR71XX_PCI_WIN1_OFFS 0x11000000
#define AR724X_PCI_CTRL_SIZE 0x100
#define AR724X_PCI_MEM_BASE 0x10000000
-#define AR724X_PCI_MEM_SIZE 0x08000000
+#define AR724X_PCI_MEM_SIZE 0x04000000
#define AR724X_PCI_REG_RESET 0x18
#define AR724X_PCI_REG_INT_STATUS 0x4c
mn10300_dcache_flush_inv();
}
+/* Not supported for now */
+static inline int dma_mmap_coherent(struct device *dev,
+ struct vm_area_struct *vma, void *cpu_addr,
+ dma_addr_t dma_addr, size_t size)
+{
+ return -EINVAL;
+}
+
+static inline int dma_get_sgtable(struct device *dev, struct sg_table *sgt,
+ void *cpu_addr, dma_addr_t dma_addr,
+ size_t size)
+{
+ return -EINVAL;
+}
+
#endif
select RTC_DRV_GENERIC
select INIT_ALL_POSSIBLE
select BUG
- select HAVE_IRQ_WORK
select HAVE_PERF_EVENTS
select GENERIC_ATOMIC64 if !64BIT
select HAVE_GENERIC_HARDIRQS
select BROKEN_RODATA
select GENERIC_IRQ_PROBE
select GENERIC_PCI_IOMAP
- select IRQ_PER_CPU
select ARCH_HAVE_NMI_SAFE_CMPXCHG
select GENERIC_SMP_IDLE_THREAD
select GENERIC_STRNCPY_FROM_USER
/* At the moment, we panic on error for IOMMU resource exaustion */
#define dma_mapping_error(dev, x) 0
+/* This API cannot be supported on PA-RISC */
+static inline int dma_mmap_coherent(struct device *dev,
+ struct vm_area_struct *vma, void *cpu_addr,
+ dma_addr_t dma_addr, size_t size)
+{
+ return -EINVAL;
+}
+
+static inline int dma_get_sgtable(struct device *dev, struct sg_table *sgt,
+ void *cpu_addr, dma_addr_t dma_addr,
+ size_t size)
+{
+ return -EINVAL;
+}
+
#endif
select HAVE_SYSCALL_WRAPPERS if PPC64
select GENERIC_ATOMIC64 if PPC32
select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
- select HAVE_IRQ_WORK
select HAVE_PERF_EVENTS
select HAVE_REGS_AND_STACK_ACCESS_API
select HAVE_HW_BREAKPOINT if PERF_EVENTS && PPC_BOOK3S_64
select HAVE_GENERIC_HARDIRQS
select ARCH_WANT_IPC_PARSE_VERSION
select SPARSE_IRQ
- select IRQ_PER_CPU
select IRQ_DOMAIN
select GENERIC_IRQ_SHOW
select GENERIC_IRQ_SHOW_LEVEL
CONFIG_PPC64=y
CONFIG_PPC_BOOK3E_64=y
-# CONFIG_VIRT_CPU_ACCOUNTING is not set
+# CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set
CONFIG_SMP=y
CONFIG_NR_CPUS=256
CONFIG_EXPERIMENTAL=y
CONFIG_PPC64=y
CONFIG_PPC_BOOK3E_64=y
-# CONFIG_VIRT_CPU_ACCOUNTING is not set
+# CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_EXPERIMENTAL=y
CONFIG_PPC64=y
CONFIG_ALTIVEC=y
-# CONFIG_VIRT_CPU_ACCOUNTING is not set
+# CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_EXPERIMENTAL=y
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
- * If we have CONFIG_VIRT_CPU_ACCOUNTING, we measure cpu time in
+ * If we have CONFIG_VIRT_CPU_ACCOUNTING_NATIVE, we measure cpu time in
* the same units as the timebase. Otherwise we measure cpu time
* in jiffies using the generic definitions.
*/
#ifndef __POWERPC_CPUTIME_H
#define __POWERPC_CPUTIME_H
-#ifndef CONFIG_VIRT_CPU_ACCOUNTING
+#ifndef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
#include <asm-generic/cputime.h>
#ifdef __KERNEL__
static inline void setup_cputime_one_jiffy(void) { }
static inline void arch_vtime_task_switch(struct task_struct *tsk) { }
#endif /* __KERNEL__ */
-#endif /* CONFIG_VIRT_CPU_ACCOUNTING */
+#endif /* CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */
#endif /* __POWERPC_CPUTIME_H */
extern struct kmem_cache *dtl_cache;
/*
- * When CONFIG_VIRT_CPU_ACCOUNTING = y, the cpu accounting code controls
+ * When CONFIG_VIRT_CPU_ACCOUNTING_NATIVE = y, the cpu accounting code controls
* reading from the dispatch trace log. If other code wants to consume
* DTL entries, it can set this pointer to a function that will get
* called once for each DTL entry that gets processed.
#include <linux/types.h>
#include <asm/hw_irq.h>
+#include <linux/device.h>
#define MAX_HWEVENTS 8
#define MAX_EVENT_ALTERNATIVES 8
void (*disable_pmc)(unsigned int pmc, unsigned long mmcr[]);
int (*limited_pmc_event)(u64 event_id);
u32 flags;
+ const struct attribute_group **attr_groups;
int n_generic;
int *generic_events;
int (*cache_events)[PERF_COUNT_HW_CACHE_MAX]
* If an event_id is not subject to the constraint expressed by a particular
* field, then it will have 0 in both the mask and value for that field.
*/
+
+extern ssize_t power_events_sysfs_show(struct device *dev,
+ struct device_attribute *attr, char *page);
+
+/*
+ * EVENT_VAR() is same as PMU_EVENT_VAR with a suffix.
+ *
+ * Having a suffix allows us to have aliases in sysfs - eg: the generic
+ * event 'cpu-cycles' can have two entries in sysfs: 'cpu-cycles' and
+ * 'PM_CYC' where the latter is the name by which the event is known in
+ * POWER CPU specification.
+ */
+#define EVENT_VAR(_id, _suffix) event_attr_##_id##_suffix
+#define EVENT_PTR(_id, _suffix) &EVENT_VAR(_id, _suffix).attr.attr
+
+#define EVENT_ATTR(_name, _id, _suffix) \
+ PMU_EVENT_ATTR(_name, EVENT_VAR(_id, _suffix), PME_PM_##_id, \
+ power_events_sysfs_show)
+
+#define GENERIC_EVENT_ATTR(_name, _id) EVENT_ATTR(_name, _id, _g)
+#define GENERIC_EVENT_PTR(_id) EVENT_PTR(_id, _g)
+
+#define POWER_EVENT_ATTR(_name, _id) EVENT_ATTR(PM_##_name, _id, _p)
+#define POWER_EVENT_PTR(_id) EVENT_PTR(_id, _p)
* user_time and system_time fields in the paca.
*/
-#ifndef CONFIG_VIRT_CPU_ACCOUNTING
+#ifndef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
#define ACCOUNT_CPU_USER_ENTRY(ra, rb)
#define ACCOUNT_CPU_USER_EXIT(ra, rb)
#define ACCOUNT_STOLEN_TIME
#endif /* CONFIG_PPC_SPLPAR */
-#endif /* CONFIG_VIRT_CPU_ACCOUNTING */
+#endif /* CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */
/*
* Macros for storing registers into and loading registers from
ret_from_kernel_thread:
REST_NVGPRS(r1)
bl schedule_tail
+ li r3,0
+ stw r3,0(r1)
mtlr r14
mr r3,r15
PPC440EP_ERR42
addi r9,r1,STACK_FRAME_OVERHEAD
ld r11,exception_marker@toc(r2)
std r11,-16(r9) /* "regshere" marker */
-#if defined(CONFIG_VIRT_CPU_ACCOUNTING) && defined(CONFIG_PPC_SPLPAR)
+#if defined(CONFIG_VIRT_CPU_ACCOUNTING_NATIVE) && defined(CONFIG_PPC_SPLPAR)
BEGIN_FW_FTR_SECTION
beq 33f
/* if from user, see if there are any DTL entries to process */
addi r9,r1,STACK_FRAME_OVERHEAD
33:
END_FW_FTR_SECTION_IFSET(FW_FEATURE_SPLPAR)
-#endif /* CONFIG_VIRT_CPU_ACCOUNTING && CONFIG_PPC_SPLPAR */
+#endif /* CONFIG_VIRT_CPU_ACCOUNTING_NATIVE && CONFIG_PPC_SPLPAR */
/*
* A syscall should always be called with interrupts enabled
ld r4,TI_FLAGS(r9)
andi. r0,r4,_TIF_NEED_RESCHED
bne 1b
+
+ /*
+ * arch_local_irq_restore() from preempt_schedule_irq above may
+ * enable hard interrupt but we really should disable interrupts
+ * when we return from the interrupt, and so that we don't get
+ * interrupted after loading SRR0/1.
+ */
+#ifdef CONFIG_PPC_BOOK3E
+ wrteei 0
+#else
+ ld r10,PACAKMSR(r13) /* Get kernel MSR without EE */
+ mtmsrd r10,1 /* Update machine state */
+#endif /* CONFIG_PPC_BOOK3E */
#endif /* CONFIG_PREEMPT */
.globl fast_exc_return_irq
static int kgdb_singlestep(struct pt_regs *regs)
{
struct thread_info *thread_info, *exception_thread_info;
- struct thread_info *backup_current_thread_info = \
- (struct thread_info *)kmalloc(sizeof(struct thread_info), GFP_KERNEL);
+ struct thread_info *backup_current_thread_info;
if (user_mode(regs))
return 0;
+ backup_current_thread_info = (struct thread_info *)kmalloc(sizeof(struct thread_info), GFP_KERNEL);
/*
* On Book E and perhaps other processors, singlestep is handled on
* the critical exception stack. This causes current_thread_info()
/* Restore current_thread_info lastly. */
memcpy(exception_thread_info, backup_current_thread_info, sizeof *thread_info);
+ kfree(backup_current_thread_info);
return 1;
}
unsigned long ppc_tb_freq;
EXPORT_SYMBOL_GPL(ppc_tb_freq);
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
/*
* Factors for converting from cputime_t (timebase ticks) to
* jiffies, microseconds, seconds, and clock_t (1/USER_HZ seconds).
if (stolen)
account_steal_time(stolen);
}
+EXPORT_SYMBOL_GPL(vtime_account_system);
void vtime_account_idle(struct task_struct *tsk)
{
account_user_time(tsk, utime, utimescaled);
}
-#else /* ! CONFIG_VIRT_CPU_ACCOUNTING */
+#else /* ! CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */
#define calc_cputime_factors()
#endif
set_dec(DECREMENTER_MAX);
/* Some implementations of hotplug will get timer interrupts while
- * offline, just ignore these
+ * offline, just ignore these and we also need to set
+ * decrementers_next_tb as MAX to make sure __check_irq_replay
+ * don't replay timer interrupt when return, otherwise we'll trap
+ * here infinitely :(
*/
- if (!cpu_online(smp_processor_id()))
+ if (!cpu_online(smp_processor_id())) {
+ *next_tb = ~(u64)0;
return;
+ }
/* Conditionally hard-enable interrupts now that the DEC has been
* bumped to its maximum value
struct rtc_time tm;
if (!ppc_md.set_rtc_time)
- return 0;
+ return -ENODEV;
to_tm(now.tv_sec + 1 + timezone_offset, &tm);
tm.tm_year -= 1900;
sldi r29,r5,SID_SHIFT - VPN_SHIFT
rldicl r28,r3,64 - VPN_SHIFT,64 - (SID_SHIFT - VPN_SHIFT)
or r29,r28,r29
-
- /* Calculate hash value for primary slot and store it in r28 */
- rldicl r5,r5,0,25 /* vsid & 0x0000007fffffffff */
- rldicl r0,r3,64-12,48 /* (ea >> 12) & 0xffff */
- xor r28,r5,r0
+ /*
+ * Calculate hash value for primary slot and store it in r28
+ * r3 = va, r5 = vsid
+ * r0 = (va >> 12) & ((1ul << (28 - 12)) -1)
+ */
+ rldicl r0,r3,64-12,48
+ xor r28,r5,r0 /* hash */
b 4f
3: /* Calc vpn and put it in r29 */
/*
* calculate hash value for primary slot and
* store it in r28 for 1T segment
+ * r3 = va, r5 = vsid
*/
- rldic r28,r5,25,25 /* (vsid << 25) & 0x7fffffffff */
- clrldi r5,r5,40 /* vsid & 0xffffff */
- rldicl r0,r3,64-12,36 /* (ea >> 12) & 0xfffffff */
- xor r28,r28,r5
+ sldi r28,r5,25 /* vsid << 25 */
+ /* r0 = (va >> 12) & ((1ul << (40 - 12)) -1) */
+ rldicl r0,r3,64-12,36
+ xor r28,r28,r5 /* vsid ^ ( vsid << 25) */
xor r28,r28,r0 /* hash */
/* Convert linux PTE bits into HW equivalents */
*/
rldicl r28,r3,64 - VPN_SHIFT,64 - (SID_SHIFT - VPN_SHIFT)
or r29,r28,r29
-
- /* Calculate hash value for primary slot and store it in r28 */
- rldicl r5,r5,0,25 /* vsid & 0x0000007fffffffff */
- rldicl r0,r3,64-12,48 /* (ea >> 12) & 0xffff */
- xor r28,r5,r0
+ /*
+ * Calculate hash value for primary slot and store it in r28
+ * r3 = va, r5 = vsid
+ * r0 = (va >> 12) & ((1ul << (28 - 12)) -1)
+ */
+ rldicl r0,r3,64-12,48
+ xor r28,r5,r0 /* hash */
b 4f
3: /* Calc vpn and put it in r29 */
/*
* Calculate hash value for primary slot and
* store it in r28 for 1T segment
+ * r3 = va, r5 = vsid
*/
- rldic r28,r5,25,25 /* (vsid << 25) & 0x7fffffffff */
- clrldi r5,r5,40 /* vsid & 0xffffff */
- rldicl r0,r3,64-12,36 /* (ea >> 12) & 0xfffffff */
- xor r28,r28,r5
+ sldi r28,r5,25 /* vsid << 25 */
+ /* r0 = (va >> 12) & ((1ul << (40 - 12)) -1) */
+ rldicl r0,r3,64-12,36
+ xor r28,r28,r5 /* vsid ^ ( vsid << 25) */
xor r28,r28,r0 /* hash */
/* Convert linux PTE bits into HW equivalents */
rldicl r28,r3,64 - VPN_SHIFT,64 - (SID_SHIFT - VPN_SHIFT)
or r29,r28,r29
- /* Calculate hash value for primary slot and store it in r28 */
- rldicl r5,r5,0,25 /* vsid & 0x0000007fffffffff */
- rldicl r0,r3,64-16,52 /* (ea >> 16) & 0xfff */
- xor r28,r5,r0
+ /* Calculate hash value for primary slot and store it in r28
+ * r3 = va, r5 = vsid
+ * r0 = (va >> 16) & ((1ul << (28 - 16)) -1)
+ */
+ rldicl r0,r3,64-16,52
+ xor r28,r5,r0 /* hash */
b 4f
3: /* Calc vpn and put it in r29 */
sldi r29,r5,SID_SHIFT_1T - VPN_SHIFT
rldicl r28,r3,64 - VPN_SHIFT,64 - (SID_SHIFT_1T - VPN_SHIFT)
or r29,r28,r29
-
/*
* calculate hash value for primary slot and
* store it in r28 for 1T segment
+ * r3 = va, r5 = vsid
*/
- rldic r28,r5,25,25 /* (vsid << 25) & 0x7fffffffff */
- clrldi r5,r5,40 /* vsid & 0xffffff */
- rldicl r0,r3,64-16,40 /* (ea >> 16) & 0xffffff */
- xor r28,r28,r5
+ sldi r28,r5,25 /* vsid << 25 */
+ /* r0 = (va >> 16) & ((1ul << (40 - 16)) -1) */
+ rldicl r0,r3,64-16,40
+ xor r28,r28,r5 /* vsid ^ ( vsid << 25) */
xor r28,r28,r0 /* hash */
/* Convert linux PTE bits into HW equivalents */
for (pmc = 0; pmc < 4; pmc++) {
psel = mmcr1 & (OPROFILE_PM_PMCSEL_MSK
<< (OPROFILE_MAX_PMC_NUM - pmc)
- * OPROFILE_MAX_PMC_NUM);
+ * OPROFILE_PMSEL_FIELD_WIDTH);
psel = (psel >> ((OPROFILE_MAX_PMC_NUM - pmc)
* OPROFILE_PMSEL_FIELD_WIDTH)) & ~1ULL;
unit = mmcr1 & (OPROFILE_PM_UNIT_MSK
return event->hw.idx;
}
+ssize_t power_events_sysfs_show(struct device *dev,
+ struct device_attribute *attr, char *page)
+{
+ struct perf_pmu_events_attr *pmu_attr;
+
+ pmu_attr = container_of(attr, struct perf_pmu_events_attr, attr);
+
+ return sprintf(page, "event=0x%02llx\n", pmu_attr->id);
+}
+
struct pmu power_pmu = {
.pmu_enable = power_pmu_enable,
.pmu_disable = power_pmu_disable,
pr_info("%s performance monitor hardware support registered\n",
pmu->name);
+ power_pmu.attr_groups = ppmu->attr_groups;
+
#ifdef MSR_HV
/*
* Use FCHV to ignore kernel events if MSR.HV is set.
#define MMCR1_PMCSEL_SH(n) (MMCR1_PMC1SEL_SH - (n) * 8)
#define MMCR1_PMCSEL_MSK 0xff
+/*
+ * Power7 event codes.
+ */
+#define PME_PM_CYC 0x1e
+#define PME_PM_GCT_NOSLOT_CYC 0x100f8
+#define PME_PM_CMPLU_STALL 0x4000a
+#define PME_PM_INST_CMPL 0x2
+#define PME_PM_LD_REF_L1 0xc880
+#define PME_PM_LD_MISS_L1 0x400f0
+#define PME_PM_BRU_FIN 0x10068
+#define PME_PM_BRU_MPRED 0x400f6
+
/*
* Layout of constraint bits:
* 6666555555555544444444443333333333222222222211111111110000000000
}
static int power7_generic_events[] = {
- [PERF_COUNT_HW_CPU_CYCLES] = 0x1e,
- [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = 0x100f8, /* GCT_NOSLOT_CYC */
- [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = 0x4000a, /* CMPLU_STALL */
- [PERF_COUNT_HW_INSTRUCTIONS] = 2,
- [PERF_COUNT_HW_CACHE_REFERENCES] = 0xc880, /* LD_REF_L1_LSU*/
- [PERF_COUNT_HW_CACHE_MISSES] = 0x400f0, /* LD_MISS_L1 */
- [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x10068, /* BRU_FIN */
- [PERF_COUNT_HW_BRANCH_MISSES] = 0x400f6, /* BR_MPRED */
+ [PERF_COUNT_HW_CPU_CYCLES] = PME_PM_CYC,
+ [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = PME_PM_GCT_NOSLOT_CYC,
+ [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = PME_PM_CMPLU_STALL,
+ [PERF_COUNT_HW_INSTRUCTIONS] = PME_PM_INST_CMPL,
+ [PERF_COUNT_HW_CACHE_REFERENCES] = PME_PM_LD_REF_L1,
+ [PERF_COUNT_HW_CACHE_MISSES] = PME_PM_LD_MISS_L1,
+ [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = PME_PM_BRU_FIN,
+ [PERF_COUNT_HW_BRANCH_MISSES] = PME_PM_BRU_MPRED,
};
#define C(x) PERF_COUNT_HW_CACHE_##x
},
};
+
+GENERIC_EVENT_ATTR(cpu-cycles, CYC);
+GENERIC_EVENT_ATTR(stalled-cycles-frontend, GCT_NOSLOT_CYC);
+GENERIC_EVENT_ATTR(stalled-cycles-backend, CMPLU_STALL);
+GENERIC_EVENT_ATTR(instructions, INST_CMPL);
+GENERIC_EVENT_ATTR(cache-references, LD_REF_L1);
+GENERIC_EVENT_ATTR(cache-misses, LD_MISS_L1);
+GENERIC_EVENT_ATTR(branch-instructions, BRU_FIN);
+GENERIC_EVENT_ATTR(branch-misses, BRU_MPRED);
+
+POWER_EVENT_ATTR(CYC, CYC);
+POWER_EVENT_ATTR(GCT_NOSLOT_CYC, GCT_NOSLOT_CYC);
+POWER_EVENT_ATTR(CMPLU_STALL, CMPLU_STALL);
+POWER_EVENT_ATTR(INST_CMPL, INST_CMPL);
+POWER_EVENT_ATTR(LD_REF_L1, LD_REF_L1);
+POWER_EVENT_ATTR(LD_MISS_L1, LD_MISS_L1);
+POWER_EVENT_ATTR(BRU_FIN, BRU_FIN)
+POWER_EVENT_ATTR(BRU_MPRED, BRU_MPRED);
+
+static struct attribute *power7_events_attr[] = {
+ GENERIC_EVENT_PTR(CYC),
+ GENERIC_EVENT_PTR(GCT_NOSLOT_CYC),
+ GENERIC_EVENT_PTR(CMPLU_STALL),
+ GENERIC_EVENT_PTR(INST_CMPL),
+ GENERIC_EVENT_PTR(LD_REF_L1),
+ GENERIC_EVENT_PTR(LD_MISS_L1),
+ GENERIC_EVENT_PTR(BRU_FIN),
+ GENERIC_EVENT_PTR(BRU_MPRED),
+
+ POWER_EVENT_PTR(CYC),
+ POWER_EVENT_PTR(GCT_NOSLOT_CYC),
+ POWER_EVENT_PTR(CMPLU_STALL),
+ POWER_EVENT_PTR(INST_CMPL),
+ POWER_EVENT_PTR(LD_REF_L1),
+ POWER_EVENT_PTR(LD_MISS_L1),
+ POWER_EVENT_PTR(BRU_FIN),
+ POWER_EVENT_PTR(BRU_MPRED),
+ NULL
+};
+
+
+static struct attribute_group power7_pmu_events_group = {
+ .name = "events",
+ .attrs = power7_events_attr,
+};
+
+static const struct attribute_group *power7_pmu_attr_groups[] = {
+ &power7_pmu_events_group,
+ NULL,
+};
+
static struct power_pmu power7_pmu = {
.name = "POWER7",
.n_counter = 6,
.get_alternatives = power7_get_alternatives,
.disable_pmc = power7_disable_pmc,
.flags = PPMU_ALT_SIPR,
+ .attr_groups = power7_pmu_attr_groups,
.n_generic = ARRAY_SIZE(power7_generic_events),
.generic_events = power7_generic_events,
.cache_events = &power7_cache_events,
#include <linux/errno.h>
#include <linux/sched.h>
+#include <linux/sched/rt.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/slab.h>
static int pas_cpufreq_cpu_exit(struct cpufreq_policy *policy)
{
+ /*
+ * We don't support CPU hotplug. Don't unmap after the system
+ * has already made it to a running state.
+ */
+ if (system_state != SYSTEM_BOOTING)
+ return 0;
+
if (sdcasr_mapbase)
iounmap(sdcasr_mapbase);
if (sdcpwr_mapbase)
*/
static int dtl_buf_entries = N_DISPATCH_LOG;
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
struct dtl_ring {
u64 write_index;
struct dtl_entry *write_ptr;
return per_cpu(dtl_rings, dtl->cpu).write_index;
}
-#else /* CONFIG_VIRT_CPU_ACCOUNTING */
+#else /* CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */
static int dtl_start(struct dtl *dtl)
{
{
return lppaca_of(dtl->cpu).dtl_idx;
}
-#endif /* CONFIG_VIRT_CPU_ACCOUNTING */
+#endif /* CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */
static int dtl_enable(struct dtl *dtl)
{
struct kmem_cache *dtl_cache;
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
/*
* Allocate space for the dispatch trace log for all possible cpus
* and register the buffers with the hypervisor. This is used for
return 0;
}
-#else /* !CONFIG_VIRT_CPU_ACCOUNTING */
+#else /* !CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */
static inline int alloc_dispatch_logs(void)
{
return 0;
}
-#endif /* CONFIG_VIRT_CPU_ACCOUNTING */
+#endif /* CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */
static int alloc_dispatch_log_kmem_cache(void)
{
select HAVE_KVM if 64BIT
select HAVE_ARCH_TRACEHOOK
select INIT_ALL_POSSIBLE
- select HAVE_IRQ_WORK
select HAVE_PERF_EVENTS
select ARCH_HAVE_NMI_SAFE_CMPXCHG
select HAVE_DEBUG_KMEMLEAK
__pmd_idte(address, pmdp);
}
+#define __HAVE_ARCH_PMDP_SET_WRPROTECT
+static inline void pmdp_set_wrprotect(struct mm_struct *mm,
+ unsigned long address, pmd_t *pmdp)
+{
+ pmd_t pmd = *pmdp;
+
+ if (pmd_write(pmd)) {
+ __pmd_idte(address, pmdp);
+ set_pmd_at(mm, address, pmdp, pmd_wrprotect(pmd));
+ }
+}
+
static inline pmd_t mk_pmd_phys(unsigned long physpage, pgprot_t pgprot)
{
pmd_t __pmd;
nsecs = ktime_to_ns(ktime_add(timespec_to_ktime(ts), expires));
do_div(nsecs, 125);
S390_lowcore.clock_comparator = sched_clock_base_cc + (nsecs << 9);
+ /* Program the maximum value if we have an overflow (== year 2042) */
+ if (unlikely(S390_lowcore.clock_comparator < sched_clock_base_cc))
+ S390_lowcore.clock_comparator = -1ULL;
set_clock_comparator(S390_lowcore.clock_comparator);
return 0;
}
* Update process times based on virtual cpu times stored by entry.S
* to the lowcore fields user_timer, system_timer & steal_clock.
*/
-void vtime_account(struct task_struct *tsk)
+void vtime_account_irq_enter(struct task_struct *tsk)
{
struct thread_info *ti = task_thread_info(tsk);
u64 timer, system;
virt_timer_forward(system);
}
-EXPORT_SYMBOL_GPL(vtime_account);
+EXPORT_SYMBOL_GPL(vtime_account_irq_enter);
void vtime_account_system(struct task_struct *tsk)
-__attribute__((alias("vtime_account")));
+__attribute__((alias("vtime_account_irq_enter")));
EXPORT_SYMBOL_GPL(vtime_account_system);
void __kprobes vtime_stop_cpu(void)
select HAVE_ARCH_TRACEHOOK
select HAVE_DMA_API_DEBUG
select HAVE_DMA_ATTRS
- select HAVE_IRQ_WORK
select HAVE_PERF_EVENTS
select HAVE_DEBUG_BUGVERBOSE
select ARCH_HAVE_CUSTOM_GPIO_H
config GENERIC_HWEIGHT
def_bool y
-config IRQ_PER_CPU
- def_bool y
-
config GENERIC_GPIO
def_bool n
select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
select RTC_CLASS
select RTC_DRV_M48T59
- select HAVE_IRQ_WORK
select HAVE_DMA_ATTRS
select HAVE_DMA_API_DEBUG
select HAVE_ARCH_JUMP_LABEL
select HAVE_MEMBLOCK
select HAVE_MEMBLOCK_NODE_MAP
select HAVE_SYSCALL_WRAPPERS
+ select HAVE_ARCH_TRANSPARENT_HUGEPAGE
select HAVE_DYNAMIC_FTRACE
select HAVE_FTRACE_MCOUNT_RECORD
select HAVE_SYSCALL_TRACEPOINTS
#define PMD_PADDR _AC(0xfffffffe,UL)
#define PMD_PADDR_SHIFT _AC(11,UL)
-#ifdef CONFIG_TRANSPARENT_HUGEPAGE
#define PMD_ISHUGE _AC(0x00000001,UL)
/* This is the PMD layout when PMD_ISHUGE is set. With 4MB huge
#define PMD_HUGE_ACCESSED _AC(0x00000080,UL)
#define PMD_HUGE_EXEC _AC(0x00000040,UL)
#define PMD_HUGE_SPLITTING _AC(0x00000020,UL)
-#endif
/* PGDs point to PMD tables which are 8K aligned. */
#define PGD_PADDR _AC(0xfffffffc,UL)
return pte_val(pte) & _PAGE_SPECIAL;
}
+static inline int pmd_large(pmd_t pmd)
+{
+ return (pmd_val(pmd) & (PMD_ISHUGE | PMD_HUGE_PRESENT)) ==
+ (PMD_ISHUGE | PMD_HUGE_P
projects / ~shefty / rdma-dev.git / commitdiff