-What: /sys/bus/fcoe/ctlr_X
+What: /sys/bus/fcoe/
+Date: August 2012
+KernelVersion: TBD
+Contact: Robert Love <robert.w.love@intel.com>, devel@open-fcoe.org
+Description: The FCoE bus. Attributes in this directory are control interfaces.
+Attributes:
+
+ ctlr_create: 'FCoE Controller' instance creation interface. Writing an
+ <ifname> to this file will allocate and populate sysfs with a
+ fcoe_ctlr_device (ctlr_X). The user can then configure any
+ per-port settings and finally write to the fcoe_ctlr_device's
+ 'start' attribute to begin the kernel's discovery and login
+ process.
+
+ ctlr_destroy: 'FCoE Controller' instance removal interface. Writing a
+ fcoe_ctlr_device's sysfs name to this file will log the
+ fcoe_ctlr_device out of the fabric or otherwise connected
+ FCoE devices. It will also free all kernel memory allocated
+ for this fcoe_ctlr_device and any structures associated
+ with it, this includes the scsi_host.
+
+What: /sys/bus/fcoe/devices/ctlr_X
Date: March 2012
KernelVersion: TBD
Contact: Robert Love <robert.w.love@intel.com>, devel@open-fcoe.org
-Description: 'FCoE Controller' instances on the fcoe bus
+Description: 'FCoE Controller' instances on the fcoe bus.
+ The FCoE Controller now has a three stage creation process.
+ 1) Write interface name to ctlr_create 2) Configure the FCoE
+ Controller (ctlr_X) 3) Enable the FCoE Controller to begin
+ discovery and login. The FCoE Controller is destroyed by
+ writing it's name, i.e. ctlr_X to the ctlr_delete file.
+
Attributes:
fcf_dev_loss_tmo: Device loss timeout peroid (see below). Changing
this value will change the dev_loss_tmo for all
FCFs discovered by this controller.
+ mode: Display or change the FCoE Controller's mode. Possible
+ modes are 'Fabric' and 'VN2VN'. If a FCoE Controller
+ is started in 'Fabric' mode then FIP FCF discovery is
+ initiated and ultimately a fabric login is attempted.
+ If a FCoE Controller is started in 'VN2VN' mode then
+ FIP VN2VN discovery and login is performed. A FCoE
+ Controller only supports one mode at a time.
+
+ enabled: Whether an FCoE controller is enabled or disabled.
+ 0 if disabled, 1 if enabled. Writing either 0 or 1
+ to this file will enable or disable the FCoE controller.
+
lesb/link_fail: Link Error Status Block (LESB) link failure count.
lesb/vlink_fail: Link Error Status Block (LESB) virtual link
Notes: ctlr_X (global increment starting at 0)
-What: /sys/bus/fcoe/fcf_X
+What: /sys/bus/fcoe/devices/fcf_X
Date: March 2012
KernelVersion: TBD
Contact: Robert Love <robert.w.love@intel.com>, devel@open-fcoe.org
--- /dev/null
+What: /sys/devices/platform/msi-laptop-pf/lcd_level
+Date: Oct 2006
+KernelVersion: 2.6.19
+Contact: "Lennart Poettering <mzxreary@0pointer.de>"
+Description:
+ Screen brightness: contains a single integer in the range 0..8.
+
+What: /sys/devices/platform/msi-laptop-pf/auto_brightness
+Date: Oct 2006
+KernelVersion: 2.6.19
+Contact: "Lennart Poettering <mzxreary@0pointer.de>"
+Description:
+ Enable automatic brightness control: contains either 0 or 1. If
+ set to 1 the hardware adjusts the screen brightness
+ automatically when the power cord is plugged/unplugged.
+
+What: /sys/devices/platform/msi-laptop-pf/wlan
+Date: Oct 2006
+KernelVersion: 2.6.19
+Contact: "Lennart Poettering <mzxreary@0pointer.de>"
+Description:
+ WLAN subsystem enabled: contains either 0 or 1.
+
+What: /sys/devices/platform/msi-laptop-pf/bluetooth
+Date: Oct 2006
+KernelVersion: 2.6.19
+Contact: "Lennart Poettering <mzxreary@0pointer.de>"
+Description:
+ Bluetooth subsystem enabled: contains either 0 or 1. Please
+ note that this file is constantly 0 if no Bluetooth hardware is
+ available.
+
+What: /sys/devices/platform/msi-laptop-pf/touchpad
+Date: Nov 2012
+KernelVersion: 3.8
+Contact: "Maxim Mikityanskiy <maxtram95@gmail.com>"
+Description:
+ Contains either 0 or 1 and indicates if touchpad is turned on.
+ Touchpad state can only be toggled by pressing Fn+F3.
+
+What: /sys/devices/platform/msi-laptop-pf/turbo_mode
+Date: Nov 2012
+KernelVersion: 3.8
+Contact: "Maxim Mikityanskiy <maxtram95@gmail.com>"
+Description:
+ Contains either 0 or 1 and indicates if turbo mode is turned
+ on. In turbo mode power LED is orange and processor is
+ overclocked. Turbo mode is available only if charging. It is
+ only possible to toggle turbo mode state by pressing Fn+F10,
+ and there is a few seconds cooldown between subsequent toggles.
+ If user presses Fn+F10 too frequent, turbo mode state is not
+ changed.
+
+What: /sys/devices/platform/msi-laptop-pf/eco_mode
+Date: Nov 2012
+KernelVersion: 3.8
+Contact: "Maxim Mikityanskiy <maxtram95@gmail.com>"
+Description:
+ Contains either 0 or 1 and indicates if ECO mode is turned on.
+ In ECO mode power LED is green and userspace should do some
+ powersaving actions. ECO mode is available only on battery
+ power. ECO mode can only be toggled by pressing Fn+F10.
+
+What: /sys/devices/platform/msi-laptop-pf/turbo_cooldown
+Date: Nov 2012
+KernelVersion: 3.8
+Contact: "Maxim Mikityanskiy <maxtram95@gmail.com>"
+Description:
+ Contains value in range 0..3:
+ * 0 -> Turbo mode is off
+ * 1 -> Turbo mode is on, cannot be turned off yet
+ * 2 -> Turbo mode is off, cannot be turned on yet
+ * 3 -> Turbo mode is on
+
+What: /sys/devices/platform/msi-laptop-pf/auto_fan
+Date: Nov 2012
+KernelVersion: 3.8
+Contact: "Maxim Mikityanskiy <maxtram95@gmail.com>"
+Description:
+ Contains either 0 or 1 and indicates if fan speed is controlled
+ automatically (1) or fan runs at maximal speed (0). Can be
+ toggled in software.
+
--- /dev/null
+Guidance for writing policies
+=============================
+
+Try to keep transactionality out of it. The core is careful to
+avoid asking about anything that is migrating. This is a pain, but
+makes it easier to write the policies.
+
+Mappings are loaded into the policy at construction time.
+
+Every bio that is mapped by the target is referred to the policy.
+The policy can return a simple HIT or MISS or issue a migration.
+
+Currently there's no way for the policy to issue background work,
+e.g. to start writing back dirty blocks that are going to be evicte
+soon.
+
+Because we map bios, rather than requests it's easy for the policy
+to get fooled by many small bios. For this reason the core target
+issues periodic ticks to the policy. It's suggested that the policy
+doesn't update states (eg, hit counts) for a block more than once
+for each tick. The core ticks by watching bios complete, and so
+trying to see when the io
projects / ~shefty / rdma-dev.git / commitdiff