* 'x86-bios-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, bios: Make the x86 early memory reservation a kernel option
x86, bios: By default, reserve the low 64K for all BIOSes
force Enable ASPM even on devices that claim not to support it.
WARNING: Forcing ASPM on may cause system lockups.
+ pcie_ports= [PCIE] PCIe ports handling:
+ auto Ask the BIOS whether or not to use native PCIe services
+ associated with PCIe ports (PME, hot-plug, AER). Use
+ them only if that is allowed by the BIOS.
+ native Use native PCIe services associated with PCIe ports
+ unconditionally.
+ compat Treat PCIe ports as PCI-to-PCI bridges, disable the PCIe
+ ports driver.
+
pcie_pme= [PCIE,PM] Native PCIe PME signaling options:
- Format: {auto|force}[,nomsi]
- auto Use native PCIe PME signaling if the BIOS allows the
- kernel to control PCIe config registers of root ports.
- force Use native PCIe PME signaling even if the BIOS refuses
- to allow the kernel to control the relevant PCIe config
- registers.
nomsi Do not use MSI for native PCIe PME signaling (this makes
- all PCIe root ports use INTx for everything).
+ all PCIe root ports use INTx for all services).
pcmv= [HW,PCMCIA] BadgePAD 4
Reserves a hole at the top of the kernel virtual
address space.
+ reservelow= [X86]
+ Format: nn[K]
+ Set the amount of memory to reserve for BIOS at
+ the bottom of the address space.
+
reset_devices [KNL] Force drivers to reset the underlying device
during initialization.
disables clocksource verification at runtime.
Used to enable high-resolution timer mode on older
hardware, and in virtualized environment.
+ [x86] noirqtime: Do not use TSC to do irq accounting.
+ Used to run time disable IRQ_TIME_ACCOUNTING on any
+ platforms where RDTSC is slow and this accounting
+ can add overhead.
turbografx.map[2|3]= [HW,JOY]
TurboGraFX parallel port interface
aux-ide-disks -- unplug non-primary-master IDE devices
nics -- unplug network devices
all -- unplug all emulated devices (NICs and IDE disks)
- ignore -- continue loading the Xen platform PCI driver even
- if the version check failed
+ unnecessary -- unplugging emulated devices is
+ unnecessary even if the host did not respond to
+ the unplug protocol
+ never -- do not unplug even if version check succeeds
xirc2ps_cs= [NET,PCMCIA]
Format:
select HAVE_IDE
select HAVE_OPROFILE
select HAVE_PERF_EVENTS if (!M386 && !M486)
+ select HAVE_IRQ_WORK
select HAVE_IOREMAP_PROT
select HAVE_KPROBES
select ARCH_WANT_OPTIONAL_GPIOLIB
select HAVE_KRETPROBES
select HAVE_OPTPROBES
select HAVE_FTRACE_MCOUNT_RECORD
+ select HAVE_C_RECORDMCOUNT
select HAVE_DYNAMIC_FTRACE
select HAVE_FUNCTION_TRACER
select HAVE_FUNCTION_GRAPH_TRACER
select ANON_INODES
select HAVE_ARCH_KMEMCHECK
select HAVE_USER_RETURN_NOTIFIER
+ select HAVE_ARCH_JUMP_LABEL
+ select HAVE_TEXT_POKE_SMP
config INSTRUCTION_DECODER
def_bool (KPROBES || PERF_EVENTS)
bool "GART IOMMU support" if EMBEDDED
default y
select SWIOTLB
- depends on X86_64 && PCI && K8_NB
+ depends on X86_64 && PCI && AMD_NB
---help---
Support for full DMA access of devices with 32bit memory access only
on systems with more than 3GB. This is usually needed for USB,
making when dealing with multi-core CPU chips at a cost of slightly
increased overhead in some places. If unsure say N here.
+config IRQ_TIME_ACCOUNTING
+ bool "Fine granularity task level IRQ time accounting"
+ default n
+ ---help---
+ Select this option to enable fine granularity task irq time
+ accounting. This is done by reading a timestamp on each
+ transitions between softirq and hardirq state, so there can be a
+ small performance impact.
+
+ If in doubt, say N here.
+
source "kernel/Kconfig.preempt"
config X86_UP_APIC
Set whether the default state of memory_corruption_check is
on or off.
- config X86_RESERVE_LOW_64K
- bool "Reserve low 64K of RAM on AMI/Phoenix BIOSen"
- default y
- ---help---
- Reserve the first 64K of physical RAM on BIOSes that are known
- to potentially corrupt that memory range. A numbers of BIOSes are
- known to utilize this area during suspend/resume, so it must not
- be used by the kernel.
-
- Set this to N if you are absolutely sure that you trust the BIOS
- to get all its memory reservations and usages right.
-
- If you have doubts about the BIOS (e.g. suspend/resume does not
- work or there's kernel crashes after certain hardware hotplug
- events) and it's not AMI or Phoenix, then you might want to enable
- X86_CHECK_BIOS_CORRUPTION=y to allow the kernel to check typical
- corruption patterns.
-
- Say Y if unsure.
+ config X86_RESERVE_LOW
+ int "Amount of low memory, in kilobytes, to reserve for the BIOS"
+ default 64
+ range 4 640
+ ---help---
+ Specify the amount of low memory to reserve for the BIOS.
+
+ The first page contains BIOS data structures that the kernel
+ must not use, so that page must always be reserved.
+
+ By default we reserve the first 64K of physical RAM, as a
+ number of BIOSes are known to corrupt that memory range
+ during events such as suspend/resume or monitor cable
+ insertion, so it must not be used by the kernel.
+
+ You can set this to 4 if you are absolutely sure that you
+ trust the BIOS to get all its memory reservations and usages
+ right. If you know your BIOS have problems beyond the
+ default 64K area, you can set this to 640 to avoid using the
+ entire low memory range.
+
+ If you have doubts about the BIOS (e.g. suspend/resume does
+ not work or there's kernel crashes after certain hardware
+ hotplug events) then you might want to enable
+ X86_CHECK_BIOS_CORRUPTION=y to allow the kernel to check
+ typical corruption patterns.
+
+ Leave this to the default value of 64 if you are unsure.
config MATH_EMULATION
bool
endif # X86_32
-config K8_NB
+config AMD_NB
def_bool y
depends on CPU_SUP_AMD && PCI
def_bool y
depends on X86_32
+config HAVE_TEXT_POKE_SMP
+ bool
+ select STOP_MACHINE if SMP
+
source "net/Kconfig"
source "drivers/Kconfig"
#include <asm/percpu.h>
#include <asm/topology.h>
#include <asm/apicdef.h>
-#include <asm/k8.h>
+#include <asm/amd_nb.h>
#ifdef CONFIG_X86_64
#include <asm/numa_64.h>
#endif
#include <asm/mce.h>
+#include <asm/alternative.h>
/*
* end_pfn only includes RAM, while max_pfn_mapped includes all e820 entries.
reserve_early_overlap_ok(addr, addr + size, "ibft");
}
- #ifdef CONFIG_X86_RESERVE_LOW_64K
- static int __init dmi_low_memory_corruption(const struct dmi_system_id *d)
- {
- printk(KERN_NOTICE
- "%s detected: BIOS may corrupt low RAM, working around it.\n",
- d->ident);
-
- e820_update_range(0, 0x10000, E820_RAM, E820_RESERVED);
- sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
-
- return 0;
- }
- #endif
-
- /* List of systems that have known low memory corruption BIOS problems */
- static struct dmi_system_id __initdata bad_bios_dmi_table[] = {
- #ifdef CONFIG_X86_RESERVE_LOW_64K
- {
- .callback = dmi_low_memory_corruption,
- .ident = "AMI BIOS",
- .matches = {
- DMI_MATCH(DMI_BIOS_VENDOR, "American Megatrends Inc."),
- },
- },
- {
- .callback = dmi_low_memory_corruption,
- .ident = "Phoenix BIOS",
- .matches = {
- DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies"),
- },
- },
- {
- .callback = dmi_low_memory_corruption,
- .ident = "Phoenix/MSC BIOS",
- .matches = {
- DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix/MSC"),
- },
- },
- /*
- * AMI BIOS with low memory corruption was found on Intel DG45ID and
- * DG45FC boards.
- * It has a different DMI_BIOS_VENDOR = "Intel Corp.", for now we will
- * match only DMI_BOARD_NAME and see if there is more bad products
- * with this vendor.
- */
- {
- .callback = dmi_low_memory_corruption,
- .ident = "AMI BIOS",
- .matches = {
- DMI_MATCH(DMI_BOARD_NAME, "DG45ID"),
- },
- },
- {
- .callback = dmi_low_memory_corruption,
- .ident = "AMI BIOS",
- .matches = {
- DMI_MATCH(DMI_BOARD_NAME, "DG45FC"),
- },
- },
- /*
- * The Dell Inspiron Mini 1012 has DMI_BIOS_VENDOR = "Dell Inc.", so
- * match on the product name.
- */
- {
- .callback = dmi_low_memory_corruption,
- .ident = "Phoenix BIOS",
- .matches = {
- DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1012"),
- },
- },
- #endif
- {}
- };
+ static unsigned reserve_low = CONFIG_X86_RESERVE_LOW << 10;
static void __init trim_bios_range(void)
{
* A special case is the first 4Kb of memory;
* This is a BIOS owned area, not kernel ram, but generally
* not listed as such in the E820 table.
+ *
+ * This typically reserves additional memory (64KiB by default)
+ * since some BIOSes are known to corrupt low memory. See the
+ * Kconfig help text for X86_RESERVE_LOW.
*/
- e820_update_range(0, PAGE_SIZE, E820_RAM, E820_RESERVED);
+ e820_update_range(0, ALIGN(reserve_low, PAGE_SIZE),
+ E820_RAM, E820_RESERVED);
+
/*
* special case: Some BIOSen report the PC BIOS
* area (640->1Mb) as ram even though it is not.
sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
}
+ static int __init parse_reservelow(char *p)
+ {
+ unsigned long long size;
+
+ if (!p)
+ return -EINVAL;
+
+ size = memparse(p, &p);
+
+ if (size < 4096)
+ size = 4096;
+
+ if (size > 640*1024)
+ size = 640*1024;
+
+ reserve_low = size;
+
+ return 0;
+ }
+
+ early_param("reservelow", parse_reservelow);
+
/*
* Determine if we were loaded by an EFI loader. If so, then we have also been
* passed the efi memmap, systab, etc., so we should use these data structures
{
int acpi = 0;
int k8 = 0;
+ unsigned long flags;
#ifdef CONFIG_X86_32
memcpy(&boot_cpu_data, &new_cpu_data, sizeof(new_cpu_data));
dmi_scan_machine();
- dmi_check_system(bad_bios_dmi_table);
-
/*
* VMware detection requires dmi to be available, so this
* needs to be done after dmi_scan_machine, for the BP.
x86_init.oem.banner();
mcheck_init();
+
+ local_irq_save(flags);
+ arch_init_ideal_nop5();
+ local_irq_restore(flags);
}
#ifdef CONFIG_X86_32
projects / ~shefty / rdma-dev.git / commitdiff