* 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, microcode, AMD: Update copyrights
x86, microcode, AMD: Exit early on success
x86, microcode, AMD: Simplify ucode verification
x86, microcode, AMD: Add a reusable buffer
x86, microcode, AMD: Add a vendor-specific exit function
<listitem><para>debug_object_deactivate</para></listitem>
<listitem><para>debug_object_destroy</para></listitem>
<listitem><para>debug_object_free</para></listitem>
+ <listitem><para>debug_object_assert_init</para></listitem>
</itemizedlist>
Each of these functions takes the address of the real object and
a pointer to the object type specific debug description
debug checks.
</para>
</sect1>
+
+ <sect1 id="debug_object_assert_init">
+ <title>debug_object_assert_init</title>
+ <para>
+ This function is called to assert that an object has been
+ initialized.
+ </para>
+ <para>
+ When the real object is not tracked by debugobjects, it calls
+ fixup_assert_init of the object type description structure
+ provided by the caller, with the hardcoded object state
+ ODEBUG_NOT_AVAILABLE. The fixup function can correct the problem
+ by calling debug_object_init and other specific initializing
+ functions.
+ </para>
+ <para>
+ When the real object is already tracked by debugobjects it is
+ ignored.
+ </para>
+ </sect1>
</chapter>
<chapter id="fixupfunctions">
<title>Fixup functions</title>
statistics.
</para>
</sect1>
+ <sect1 id="fixup_assert_init">
+ <title>fixup_assert_init</title>
+ <para>
+ This function is called from the debug code whenever a problem
+ in debug_object_assert_init is detected.
+ </para>
+ <para>
+ Called from debug_object_assert_init() with a hardcoded state
+ ODEBUG_STATE_NOTAVAILABLE when the object is not found in the
+ debug bucket.
+ </para>
+ <para>
+ The function returns 1 when the fixup was successful,
+ otherwise 0. The return value is used to update the
+ statistics.
+ </para>
+ <para>
+ Note, this function should make sure debug_object_init() is
+ called before returning.
+ </para>
+ <para>
+ The handling of statically initialized objects is a special
+ case. The fixup function should check if this is a legitimate
+ case of a statically initialized object or not. In this case only
+ debug_object_init() should be called to make the object known to
+ the tracker. Then the function should return 0 because this is not
+ a real fixup.
+ </para>
+ </sect1>
</chapter>
<chapter id="bugs">
<title>Known Bugs And Assumptions</title>
RCU rather than SRCU, because RCU is almost always faster and
easier to use than is SRCU.
+ If you need to enter your read-side critical section in a
+ hardirq or exception handler, and then exit that same read-side
+ critical section in the task that was interrupted, then you need
+ to srcu_read_lock_raw() and srcu_read_unlock_raw(), which avoid
+ the lockdep checking that would otherwise this practice illegal.
+
Also unlike other forms of RCU, explicit initialization
and cleanup is required via init_srcu_struct() and
cleanup_srcu_struct(). These are passed a "struct srcu_struct"
Preemptible variants of RCU (CONFIG_TREE_PREEMPT_RCU) get the
same effect, but require that the readers manipulate CPU-local
- counters. These counters allow limited types of blocking
- within RCU read-side critical sections. SRCU also uses
- CPU-local counters, and permits general blocking within
- RCU read-side critical sections. These two variants of
- RCU detect grace periods by sampling these counters.
+ counters. These counters allow limited types of blocking within
+ RCU read-side critical sections. SRCU also uses CPU-local
+ counters, and permits general blocking within RCU read-side
+ critical sections. These variants of RCU detect grace periods
+ by sampling these counters.
o If I am running on a uniprocessor kernel, which can only do one
thing at a time, why should I wait for a grace period?
CONFIG_TREE_PREEMPT_RCU case, you might see stall-warning
messages.
+o A hardware or software issue shuts off the scheduler-clock
+ interrupt on a CPU that is not in dyntick-idle mode. This
+ problem really has happened, and seems to be most likely to
+ result in RCU CPU stall warnings for CONFIG_NO_HZ=n kernels.
+
o A bug in the RCU implementation.
o A hardware failure. This is quite unlikely, but has occurred
This resulted in a series of RCU CPU stall warnings, eventually
leading the realization that the CPU had failed.
-The RCU, RCU-sched, and RCU-bh implementations have CPU stall
-warning. SRCU does not have its own CPU stall warnings, but its
-calls to synchronize_sched() will result in RCU-sched detecting
-RCU-sched-related CPU stalls. Please note that RCU only detects
-CPU stalls when there is a grace period in progress. No grace period,
-no CPU stall warnings.
+The RCU, RCU-sched, and RCU-bh implementations have CPU stall warning.
+SRCU does not have its own CPU stall warnings, but its calls to
+synchronize_sched() will result in RCU-sched detecting RCU-sched-related
+CPU stalls. Please note that RCU only detects CPU stalls when there is
+a grace period in progress. No grace period, no CPU stall warnings.
To diagnose the cause of the stall, inspect the stack traces.
The offending function will usually be near the top of the stack.
To properly exercise RCU implementations with preemptible
read-side critical sections.
+onoff_interval
+ The number of seconds between each attempt to execute a
+ randomly selected CPU-hotplug operation. Defaults to
+ zero, which disables CPU hotplugging. In HOTPLUG_CPU=n
+ kernels, rcutorture will silently refuse to do any
+ CPU-hotplug operations regardless of what value is
+ specified for onoff_interval.
+
shuffle_interval
The number of seconds to keep the test threads affinitied
to a particular subset of the CPUs, defaults to 3 seconds.
Used in conjunction with test_no_idle_hz.
+shutdown_secs The number of seconds to run the test before terminating
+ the test and powering off the system. The default is
+ zero, which disables test termination and system shutdown.
+ This capability is useful for automated testing.
+
stat_interval The number of seconds between output of torture
statistics (via printk()). Regardless of the interval,
statistics are printed when the module is unloaded.
or one greater than the interrupt-nesting depth otherwise.
The number after the second "/" is the NMI nesting depth.
- This field is displayed only for CONFIG_NO_HZ kernels.
-
o "df" is the number of times that some other CPU has forced a
quiescent state on behalf of this CPU due to this CPU being in
dynticks-idle state.
- This field is displayed only for CONFIG_NO_HZ kernels.
-
o "of" is the number of times that some other CPU has forced a
quiescent state on behalf of this CPU due to this CPU being
offline. In a perfect world, this might never happen, but it
1. What is RCU, Fundamentally? http://lwn.net/Articles/262464/
2. What is RCU? Part 2: Usage http://lwn.net/Articles/263130/
3. RCU part 3: the RCU API http://lwn.net/Articles/264090/
+4. The RCU API, 2010 Edition http://lwn.net/Articles/418853/
What is RCU?
srcu_read_lock synchronize_srcu N/A
srcu_read_unlock synchronize_srcu_expedited
+ srcu_read_lock_raw
+ srcu_read_unlock_raw
srcu_dereference
SRCU: Initialization/cleanup
a. Will readers need to block? If so, you need SRCU.
-b. What about the -rt patchset? If readers would need to block
+b. Is it necessary to start a read-side critical section in a
+ hardirq handler or exception handler, and then to complete
+ this read-side critical section in the task that was
+ interrupted? If so, you need SRCU's srcu_read_lock_raw() and
+ srcu_read_unlock_raw() primitives.
+
+c. What about the -rt patchset? If readers would need to block
in an non-rt kernel, you need SRCU. If readers would block
in a -rt kernel, but not in a non-rt kernel, SRCU is not
necessary.
-c. Do you need to treat NMI handlers, hardirq handlers,
+d. Do you need to treat NMI handlers, hardirq handlers,
and code segments with preemption disabled (whether
via preempt_disable(), local_irq_save(), local_bh_disable(),
or some other mechanism) as if they were explicit RCU readers?
If so, you need RCU-sched.
-d. Do you need RCU grace periods to complete even in the face
+e. Do you need RCU grace periods to complete even in the face
of softirq monopolization of one or more of the CPUs? For
example, is your code subject to network-based denial-of-service
attacks? If so, you need RCU-bh.
-e. Is your workload too update-intensive for normal use of
+f. Is your workload too update-intensive for normal use of
RCU, but inappropriate for other synchronization mechanisms?
If so, consider SLAB_DESTROY_BY_RCU. But please be careful!
-f. Otherwise, use RCU.
+g. Otherwise, use RCU.
Of course, this all assumes that you have determined that RCU is in fact
the right tool for your job.
*** YOU HAVE BEEN WARNED! ***
+Properly aligned pointers, longs, ints, and chars (and unsigned
+equivalents) may be atomically loaded from and stored to in the same
+sense as described for atomic_read() and atomic_set(). The ACCESS_ONCE()
+macro should be used to prevent the compiler from using optimizations
+that might otherwise optimize accesses out of existence on the one hand,
+or that might create unsolicited accesses on the other.
+
+For example consider the following code:
+
+ while (a > 0)
+ do_something();
+
+If the compiler can prove that do_something() does not store to the
+variable a, then the compiler is within its rights transforming this to
+the following:
+
+ tmp = a;
+ if (a > 0)
+ for (;;)
+ do_something();
+
+If you don't want the compiler to do this (and you probably don't), then
+you should use something like the following:
+
+ while (ACCESS_ONCE(a) < 0)
+ do_something();
+
+Alternatively, you could place a barrier() call in the loop.
+
+For another example, consider the following code:
+
+ tmp_a = a;
+ do_something_with(tmp_a);
+ do_something_else_with(tmp_a);
+
+If the compiler can prove that do_something_with() does not store to the
+variable a, then the compiler is within its rights to manufacture an
+additional load as follows:
+
+ tmp_a = a;
+ do_something_with(tmp_a);
+ tmp_a = a;
+ do_something_else_with(tmp_a);
+
+This could fatally confuse your code if it expected the same value
+to be passed to do_something_with() and do_something_else_with().
+
+The compiler would be likely to manufacture this additional load if
+do_something_with() was an inline function that made very heavy use
+of registers: reloading from variable a could save a flush to the
+stack and later reload. To prevent the compiler from attacking your
+code in this manner, write the following:
+
+ tmp_a = ACCESS_ONCE(a);
+ do_something_with(tmp_a);
+ do_something_else_with(tmp_a);
+
+For a final example, consider the following code, assuming that the
+variable a is set at boot time before the second CPU is brought online
+and never changed later, so that memory barriers are not needed:
+
+ if (a)
+ b = 9;
+ else
+ b = 42;
+
+The compiler is within its rights to manufacture an additional store
+by transforming the above code into the following:
+
+ b = 42;
+ if (a)
+ b = 9;
+
+This could come as a fatal surprise to other code running concurrently
+that expected b to never have the value 42 if a was zero. To prevent
+the compiler from doing this, write something like:
+
+ if (a)
+ ACCESS_ONCE(b) = 9;
+ else
+ ACCESS_ONCE(b) = 42;
+
+Don't even -think- about doing this without proper use of memory barriers,
+locks, or atomic operations if variable a can change at runtime!
+
+*** WARNING: ACCESS_ONCE() DOES NOT IMPLY A BARRIER! ***
+
Now, we move onto the atomic operation interfaces typically implemented with
the help of assembly code.
arch_perfmon: [X86] Force use of architectural
perfmon on Intel CPUs instead of the
CPU specific event set.
+ timer: [X86] Force use of architectural NMI
+ timer mode (see also oprofile.timer
+ for generic hr timer mode)
+ [s390] Force legacy basic mode sampling
+ (report cpu_type "timer")
oops=panic Always panic on oopses. Default is to just kill the
process, but there is a small probability of
functions are at fixed addresses, they make nice
targets for exploits that can control RIP.
- emulate Vsyscalls turn into traps and are emulated
- reasonably safely.
+ emulate [default] Vsyscalls turn into traps and are
+ emulated reasonably safely.
- native [default] Vsyscalls are native syscall
- instructions.
+ native Vsyscalls are native syscall instructions.
This is a little bit faster than trapping
and makes a few dynamic recompilers work
better than they would in emulation mode.
table, which hash-table can be checked in a lockfree manner. If the
locking chain occurs again later on, the hash table tells us that we
dont have to validate the chain again.
+
+Troubleshooting:
+----------------
+
+The validator tracks a maximum of MAX_LOCKDEP_KEYS number of lock classes.
+Exceeding this number will trigger the following lockdep warning:
+
+ (DEBUG_LOCKS_WARN_ON(id >= MAX_LOCKDEP_KEYS))
+
+By default, MAX_LOCKDEP_KEYS is currently set to 8191, and typical
+desktop systems have less than 1,000 lock classes, so this warning
+normally results from lock-class leakage or failure to properly
+initialize locks. These two problems are illustrated below:
+
+1. Repeated module loading and unloading while running the validator
+ will result in lock-class leakage. The issue here is that each
+ load of the module will create a new set of lock classes for
+ that module's locks, but module unloading does not remove old
+ classes (see below discussion of reuse of lock classes for why).
+ Therefore, if that module is loaded and unloaded repeatedly,
+ the number of lock classes will eventually reach the maximum.
+
+2. Using structures such as arrays that have large numbers of
+ locks that are not explicitly initialized. For example,
+ a hash table with 8192 buckets where each bucket has its own
+ spinlock_t will consume 8192 lock classes -unless- each spinlock
+ is explicitly initialized at runtime, for example, using the
+ run-time spin_lock_init() as opposed to compile-time initializers
+ such as __SPIN_LOCK_UNLOCKED(). Failure to properly initialize
+ the per-bucket spinlocks would guarantee lock-class overflow.
+ In contrast, a loop that called spin_lock_init() on each lock
+ would place all 8192 locks into a single lock class.
+
+ The moral of this story is that you should always explicitly
+ initialize your locks.
+
+One might argue that the validator should be modified to allow
+lock classes to be reused. However, if you are tempted to make this
+argument, first review the code and think through the changes that would
+be required, keeping in mind that the lock classes to be removed are
+likely to be linked into the lock-dependency graph. This turns out to
+be harder to do than to say.
+
+Of course, if you do run out of lock classes, the next thing to do is
+to find the offending lock classes. First, the following command gives
+you the number of lock classes currently in use along with the maximum:
+
+ grep "lock-classes" /proc/lockdep_stats
+
+This command produces the following output on a modest system:
+
+ lock-classes: 748 [max: 8191]
+
+If the number allocated (748 above) increases continually over time,
+then there is likely a leak. The following command can be used to
+identify the leaking lock classes:
+
+ grep "BD" /proc/lockdep
+
+Run the command and save the output, then compare against the output from
+a later run of this command to identify the leakers. This same output
+can also help you find situations where runtime lock initialization has
+been omitted.
Currently, only exact string matches are supported.
-Currently, the maximum number of predicates in a filter is 16.
-
5.2 Setting filters
-------------------
eax, ebx, ecx, edx: the values returned by the cpuid instruction for
this function/index combination
+The TSC deadline timer feature (CPUID leaf 1, ecx[24]) is always returned
+as false, since the feature depends on KVM_CREATE_IRQCHIP for local APIC
+support. Instead it is reported via
+
+ ioctl(KVM_CHECK_EXTENSION, KVM_CAP_TSC_DEADLINE_TIMER)
+
+if that returns true and you use KVM_CREATE_IRQCHIP, or if you emulate the
+feature in userspace, then you can enable the feature for KVM_SET_CPUID2.
+
4.47 KVM_PPC_GET_PVINFO
Capability: KVM_CAP_PPC_GET_PVINFO
/* Depends on KVM_CAP_IOMMU */
#define KVM_DEV_ASSIGN_ENABLE_IOMMU (1 << 0)
+The KVM_DEV_ASSIGN_ENABLE_IOMMU flag is a mandatory option to ensure
+isolation of the device. Usages not specifying this flag are deprecated.
+
+Only PCI header type 0 devices with PCI BAR resources are supported by
+device assignment. The user requesting this ioctl must have read/write
+access to the PCI sysfs resource files associated with the device.
+
4.49 KVM_DEASSIGN_PCI_DEVICE
Capability: KVM_CAP_DEVICE_DEASSIGNMENT
CAN NETWORK LAYER
M: Oliver Hartkopp <socketcan@hartkopp.net>
-M: Oliver Hartkopp <oliver.hartkopp@volkswagen.de>
-M: Urs Thuermann <urs.thuermann@volkswagen.de>
L: linux-can@vger.kernel.org
-L: netdev@vger.kernel.org
-W: http://developer.berlios.de/projects/socketcan/
+W: http://gitorious.org/linux-can
+T: git git://gitorious.org/linux-can/linux-can-next.git
S: Maintained
F: net/can/
F: include/linux/can.h
CAN NETWORK DRIVERS
M: Wolfgang Grandegger <wg@grandegger.com>
+M: Marc Kleine-Budde <mkl@pengutronix.de>
L: linux-can@vger.kernel.org
-L: netdev@vger.kernel.org
-W: http://developer.berlios.de/projects/socketcan/
+W: http://gitorious.org/linux-can
+T: git git://gitorious.org/linux-can/linux-can-next.git
S: Maintained
F: drivers/net/can/
F: include/linux/can/dev.h
M: Stefan Richter <stefanr@s5r6.in-berlin.de>
L: linux1394-devel@lists.sourceforge.net
W: http://ieee1394.wiki.kernel.org/
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394.git
S: Maintained
F: drivers/firewire/
F: include/linux/firewire*.h
HIGH-RESOLUTION TIMERS, CLOCKEVENTS, DYNTICKS
M: Thomas Gleixner <tglx@linutronix.de>
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers/core
S: Maintained
F: Documentation/timers/
F: kernel/hrtimer.c
IRQ SUBSYSTEM
M: Thomas Gleixner <tglx@linutronix.de>
S: Maintained
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git irq/core
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git irq/core
F: kernel/irq/
ISAPNP
LOCKDEP AND LOCKSTAT
M: Peter Zijlstra <peterz@infradead.org>
M: Ingo Molnar <mingo@redhat.com>
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/peterz/linux-2.6-lockdep.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git core/locking
S: Maintained
F: Documentation/lockdep*.txt
F: Documentation/lockstat.txt
S: Maintained
F: Documentation/dvb/
F: Documentation/video4linux/
+F: Documentation/DocBook/media/
F: drivers/media/
+F: drivers/staging/media/
F: include/media/
F: include/linux/dvb/
F: include/linux/videodev*.h
M: Paul Mackerras <paulus@samba.org>
M: Ingo Molnar <mingo@elte.hu>
M: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git perf/core
S: Supported
F: kernel/events/*
F: include/linux/perf_event.h
POSIX CLOCKS and TIMERS
M: Thomas Gleixner <tglx@linutronix.de>
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers/core
S: Supported
F: fs/timerfd.c
F: include/linux/timer*
TIMEKEEPING, NTP
M: John Stultz <johnstul@us.ibm.com>
M: Thomas Gleixner <tglx@linutronix.de>
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers/core
S: Supported
F: include/linux/clocksource.h
F: include/linux/time.h
SCHEDULER
M: Ingo Molnar <mingo@elte.hu>
M: Peter Zijlstra <peterz@infradead.org>
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git sched/core
S: Maintained
F: kernel/sched*
F: include/linux/sched.h
M: Steven Rostedt <rostedt@goodmis.org>
M: Frederic Weisbecker <fweisbec@gmail.com>
M: Ingo Molnar <mingo@redhat.com>
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git perf/core
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git perf/core
S: Maintained
F: Documentation/trace/ftrace.txt
F: arch/*/*/*/ftrace.h
M: Ingo Molnar <mingo@redhat.com>
M: "H. Peter Anvin" <hpa@zytor.com>
M: x86@kernel.org
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86/core
S: Maintained
F: Documentation/x86/
F: arch/x86/
VERSION = 3
PATCHLEVEL = 2
SUBLEVEL = 0
-EXTRAVERSION = -rc5
+EXTRAVERSION =
NAME = Saber-toothed Squirrel
# *DOCUMENTATION*
config HAVE_OPROFILE
bool
+config OPROFILE_NMI_TIMER
+ def_bool y
+ depends on PERF_EVENTS && HAVE_PERF_EVENTS_NMI
+
config KPROBES
bool "Kprobes"
depends on MODULES
config ARM_ERRATA_720789
bool "ARM errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a faulty ASID"
- depends on CPU_V7 && SMP
+ depends on CPU_V7
help
This option enables the workaround for the 720789 Cortex-A9 (prior to
r2p0) erratum. A faulty ASID can be sent to the other CPUs for the
config ARM_ERRATA_751472
bool "ARM errata: Interrupted ICIALLUIS may prevent completion of broadcasted operation"
- depends on CPU_V7 && SMP
+ depends on CPU_V7
help
This option enables the workaround for the 751472 Cortex-A9 (prior
to r3p0) erratum. An interrupted ICIALLUIS operation may prevent the
*/
#define MCODE_BUFF_PER_REQ 256
-/*
- * Mark a _pl330_req as free.
- * We do it by writing DMAEND as the first instruction
- * because no valid request is going to have DMAEND as
- * its first instruction to execute.
- */
-#define MARK_FREE(req) do { \
- _emit_END(0, (req)->mc_cpu); \
- (req)->mc_len = 0; \
- } while (0)
-
/* If the _pl330_req is available to the client */
#define IS_FREE(req) (*((u8 *)((req)->mc_cpu)) == CMD_DMAEND)
struct pl330_dmac *dmac;
/* Only two at a time */
struct _pl330_req req[2];
- /* Index of the last submitted request */
+ /* Index of the last enqueued request */
unsigned lstenq;
+ /* Index of the last submitted request or -1 if the DMA is stopped */
+ int req_running;
};
enum pl330_dmac_state {
writel(0, regs + DBGCMD);
}
+/*
+ * Mark a _pl330_req as free.
+ * We do it by writing DMAEND as the first instruction
+ * because no valid request is going to have DMAEND as
+ * its first instruction to execute.
+ */
+static void mark_free(struct pl330_thread *thrd, int idx)
+{
+ struct _pl330_req *req = &thrd->req[idx];
+
+ _emit_END(0, req->mc_cpu);
+ req->mc_len = 0;
+
+ thrd->req_running = -1;
+}
+
static inline u32 _state(struct pl330_thread *thrd)
{
void __iomem *regs = thrd->dmac->pinfo->base;
}
}
-/* If the request 'req' of thread 'thrd' is currently active */
-static inline bool _req_active(struct pl330_thread *thrd,
- struct _pl330_req *req)
-{
- void __iomem *regs = thrd->dmac->pinfo->base;
- u32 buf = req->mc_bus, pc = readl(regs + CPC(thrd->id));
-
- if (IS_FREE(req))
- return false;
-
- return (pc >= buf && pc <= buf + req->mc_len) ? true : false;
-}
-
-/* Returns 0 if the thread is inactive, ID of active req + 1 otherwise */
-static inline unsigned _thrd_active(struct pl330_thread *thrd)
-{
- if (_req_active(thrd, &thrd->req[0]))
- return 1; /* First req active */
-
- if (_req_active(thrd, &thrd->req[1]))
- return 2; /* Second req active */
-
- return 0;
-}
-
static void _stop(struct pl330_thread *thrd)
{
void __iomem *regs = thrd->dmac->pinfo->base;
struct _arg_GO go;
unsigned ns;
u8 insn[6] = {0, 0, 0, 0, 0, 0};
+ int idx;
/* Return if already ACTIVE */
if (_state(thrd) != PL330_STATE_STOPPED)
return true;
- if (!IS_FREE(&thrd->req[1 - thrd->lstenq]))
- req = &thrd->req[1 - thrd->lstenq];
- else if (!IS_FREE(&thrd->req[thrd->lstenq]))
- req = &thrd->req[thrd->lstenq];
- else
- req = NULL;
+ idx = 1 - thrd->lstenq;
+ if (!IS_FREE(&thrd->req[idx]))
+ req = &thrd->req[idx];
+ else {
+ idx = thrd->lstenq;
+ if (!IS_FREE(&thrd->req[idx]))
+ req = &thrd->req[idx];
+ else
+ req = NULL;
+ }
/* Return if no request */
if (!req || !req->r)
/* Only manager can execute GO */
_execute_DBGINSN(thrd, insn, true);
+ thrd->req_running = idx;
+
return true;
}
thrd->req[0].r = NULL;
thrd->req[1].r = NULL;
- MARK_FREE(&thrd->req[0]);
- MARK_FREE(&thrd->req[1]);
+ mark_free(thrd, 0);
+ mark_free(thrd, 1);
/* Clear the reset flag */
pl330->dmac_tbd.reset_chan &= ~(1 << i);
thrd = &pl330->channels[id];
- active = _thrd_active(thrd);
- if (!active) /* Aborted */
+ active = thrd->req_running;
+ if (active == -1) /* Aborted */
continue;
- active -= 1;
-
rqdone = &thrd->req[active];
- MARK_FREE(rqdone);
+ mark_free(thrd, active);
/* Get going again ASAP */
_start(thrd);
struct pl330_thread *thrd = ch_id;
struct pl330_dmac *pl330;
unsigned long flags;
- int ret = 0, active;
+ int ret = 0, active = thrd->req_running;
if (!thrd || thrd->free || thrd->dmac->state == DYING)
return -EINVAL;
thrd->req[0].r = NULL;
thrd->req[1].r = NULL;
- MARK_FREE(&thrd->req[0]);
- MARK_FREE(&thrd->req[1]);
+ mark_free(thrd, 0);
+ mark_free(thrd, 1);
break;
case PL330_OP_ABORT:
- active = _thrd_active(thrd);
-
/* Make sure the channel is stopped */
_stop(thrd);
/* ABORT is only for the active req */
- if (!active)
+ if (active == -1)
break;
- active--;
-
thrd->req[active].r = NULL;
- MARK_FREE(&thrd->req[active]);
+ mark_free(thrd, active);
/* Start the next */
case PL330_OP_START:
- if (!_thrd_active(thrd) && !_start(thrd))
+ if ((active == -1) && !_start(thrd))
ret = -EIO;
break;
else
pstatus->faulting = false;
- active = _thrd_active(thrd);
+ active = thrd->req_running;
- if (!active) {
+ if (active == -1) {
/* Indicate that the thread is not running */
pstatus->top_req = NULL;
pstatus->wait_req = NULL;
} else {
- active--;
pstatus->top_req = thrd->req[active].r;
pstatus->wait_req = !IS_FREE(&thrd->req[1 - active])
? thrd->req[1 - active].r : NULL;
thrd->free = false;
thrd->lstenq = 1;
thrd->req[0].r = NULL;
- MARK_FREE(&thrd->req[0]);
+ mark_free(thrd, 0);
thrd->req[1].r = NULL;
- MARK_FREE(&thrd->req[1]);
+ mark_free(thrd, 1);
break;
}
}
thrd->req[0].mc_bus = pl330->mcode_bus
+ (thrd->id * pi->mcbufsz);
thrd->req[0].r = NULL;
- MARK_FREE(&thrd->req[0]);
+ mark_free(thrd, 0);
thrd->req[1].mc_cpu = thrd->req[0].mc_cpu
+ pi->mcbufsz / 2;
thrd->req[1].mc_bus = thrd->req[0].mc_bus
+ pi->mcbufsz / 2;
thrd->req[1].r = NULL;
- MARK_FREE(&thrd->req[1]);
+ mark_free(thrd, 1);
}
static int dmac_alloc_threads(struct pl330_dmac *pl330)
CONFIG_ARCH_IMX_V4_V5=y
CONFIG_ARCH_MX1ADS=y
CONFIG_MACH_SCB9328=y
+CONFIG_MACH_APF9328=y
CONFIG_MACH_MX21ADS=y
CONFIG_MACH_MX25_3DS=y
-CONFIG_MACH_EUKREA_CPUIMX25=y
+CONFIG_MACH_EUKREA_CPUIMX25SD=y
CONFIG_MACH_MX27ADS=y
CONFIG_MACH_PCM038=y
CONFIG_MACH_CPUIMX27=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_MXC=y
CONFIG_MTD_UBI=y
CONFIG_MISC_DEVICES=y
CONFIG_EEPROM_AT24=y
CONFIG_EEPROM_AT25=y
CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
CONFIG_DM9000=y
+CONFIG_SMC91X=y
CONFIG_SMC911X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
+CONFIG_SMSC_PHY=y
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_KEYBOARD is not set
CONFIG_I2C_IMX=y
CONFIG_SPI=y
CONFIG_SPI_IMX=y
+CONFIG_SPI_SPIDEV=y
CONFIG_W1=y
CONFIG_W1_MASTER_MXC=y
CONFIG_W1_SLAVE_THERM=y
CONFIG_MMC_MXC=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
CONFIG_LEDS_MC13783=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
/* endless idle loop with no priority at all */
while (1) {
- tick_nohz_stop_sched_tick(1);
+ tick_nohz_idle_enter();
+ rcu_idle_enter();
leds_event(led_idle_start);
while (!need_resched()) {
#ifdef CONFIG_HOTPLUG_CPU
}
}
leds_event(led_idle_end);
- tick_nohz_restart_sched_tick();
+ rcu_idle_exit();
+ tick_nohz_idle_exit();
preempt_enable_no_resched();
schedule();
preempt_disable();
#include <asm/mach/time.h>
#include <asm/traps.h>
#include <asm/unwind.h>
+#include <asm/memblock.h>
#if defined(CONFIG_DEPRECATED_PARAM_STRUCT)
#include "compat.h"
const struct unwind_idx *start, const struct unwind_idx *stop)
{
pr_debug("%s(%p, %p)\n", __func__, start, stop);
- while (start < stop - 1) {
+ while (start < stop) {
const struct unwind_idx *mid = start + ((stop - start) >> 1);
if (mid->addr_offset >= 0x40000000)
/* negative offset */
- start = mid;
+ start = mid + 1;
else
/* positive offset */
stop = mid;
.pfn = __phys_to_pfn(EXYNOS4_PA_DMC0),
.length = SZ_4K,
.type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_SROMC,
- .pfn = __phys_to_pfn(EXYNOS4_PA_SROMC),
- .length = SZ_4K,
- .type = MT_DEVICE,
}, {
.virtual = (unsigned long)S3C_VA_USB_HSPHY,
.pfn = __phys_to_pfn(EXYNOS4_PA_HSPHY),
char name[10];
};
-static DEFINE_PER_CPU(struct mct_clock_event_device, percpu_mct_tick);
-
static void exynos4_mct_write(unsigned int value, void *addr)
{
void __iomem *stat_addr;
}
#ifdef CONFIG_LOCAL_TIMERS
+
+static DEFINE_PER_CPU(struct mct_clock_event_device, percpu_mct_tick);
+
/* Clock event handling */
static void exynos4_mct_tick_stop(struct mct_clock_event_device *mevt)
{
void local_timer_stop(struct clock_event_device *evt)
{
+ unsigned int cpu = smp_processor_id();
evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt);
if (mct_int_type == MCT_INT_SPI)
- disable_irq(evt->irq);
+ if (cpu == 0)
+ remove_irq(evt->irq, &mct_tick0_event_irq);
+ else
+ remove_irq(evt->irq, &mct_tick1_event_irq);
else
disable_percpu_irq(IRQ_MCT_LOCALTIMER);
}
clk_rate = clk_get_rate(mct_clk);
+#ifdef CONFIG_LOCAL_TIMERS
if (mct_int_type == MCT_INT_PPI) {
int err;
WARN(err, "MCT: can't request IRQ %d (%d)\n",
IRQ_MCT_LOCALTIMER, err);
}
+#endif /* CONFIG_LOCAL_TIMERS */
}
static void __init exynos4_timer_init(void)
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-config MACH_EUKREA_CPUIMX25
+config MACH_EUKREA_CPUIMX25SD
bool "Support Eukrea CPUIMX25 Platform"
select SOC_IMX25
select IMX_HAVE_PLATFORM_FLEXCAN
choice
prompt "Baseboard"
- depends on MACH_EUKREA_CPUIMX25
+ depends on MACH_EUKREA_CPUIMX25SD
default MACH_EUKREA_MBIMXSD25_BASEBOARD
config MACH_EUKREA_MBIMXSD25_BASEBOARD
Include support for MX35PDK platform. This includes specific
configurations for the board and its peripherals.
-config MACH_EUKREA_CPUIMX35
+config MACH_EUKREA_CPUIMX35SD
bool "Support Eukrea CPUIMX35 Platform"
select SOC_IMX35
select IMX_HAVE_PLATFORM_FLEXCAN
choice
prompt "Baseboard"
- depends on MACH_EUKREA_CPUIMX35
+ depends on MACH_EUKREA_CPUIMX35SD
default MACH_EUKREA_MBIMXSD35_BASEBOARD
config MACH_EUKREA_MBIMXSD35_BASEBOARD
# i.MX25 based machines
obj-$(CONFIG_MACH_MX25_3DS) += mach-mx25_3ds.o
-obj-$(CONFIG_MACH_EUKREA_CPUIMX25) += mach-eukrea_cpuimx25.o
+obj-$(CONFIG_MACH_EUKREA_CPUIMX25SD) += mach-eukrea_cpuimx25.o
obj-$(CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD) += eukrea_mbimxsd25-baseboard.o
# i.MX27 based machines
# i.MX35 based machines
obj-$(CONFIG_MACH_PCM043) += mach-pcm043.o
obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35_3ds.o
-obj-$(CONFIG_MACH_EUKREA_CPUIMX35) += mach-cpuimx35.o
+obj-$(CONFIG_MACH_EUKREA_CPUIMX35SD) += mach-cpuimx35.o
obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD) += eukrea_mbimxsd35-baseboard.o
obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o
int __init mx35_clocks_init()
{
- unsigned int cgr2 = 3 << 26, cgr3 = 0;
+ unsigned int cgr2 = 3 << 26;
#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
cgr2 |= 3 << 16;
__raw_writel((3 << 18), CCM_BASE + CCM_CGR0);
__raw_writel((3 << 2) | (3 << 4) | (3 << 6) | (3 << 8) | (3 << 16),
CCM_BASE + CCM_CGR1);
+ __raw_writel(cgr2, CCM_BASE + CCM_CGR2);
+ __raw_writel(0, CCM_BASE + CCM_CGR3);
+
+ clk_enable(&iim_clk);
+ imx_print_silicon_rev("i.MX35", mx35_revision());
+ clk_disable(&iim_clk);
/*
* Check if we came up in internal boot mode. If yes, we need some
*/
if (!(__raw_readl(CCM_BASE + CCM_RCSR) & (3 << 10))) {
/* Additionally turn on UART1, SCC, and IIM clocks */
- cgr2 |= 3 << 16 | 3 << 4;
- cgr3 |= 3 << 2;
+ clk_enable(&iim_clk);
+ clk_enable(&uart1_clk);
+ clk_enable(&scc_clk);
}
- __raw_writel(cgr2, CCM_BASE + CCM_CGR2);
- __raw_writel(cgr3, CCM_BASE + CCM_CGR3);
-
- clk_enable(&iim_clk);
- imx_print_silicon_rev("i.MX35", mx35_revision());
- clk_disable(&iim_clk);
-
#ifdef CONFIG_MXC_USE_EPIT
epit_timer_init(&epit1_clk,
MX35_IO_ADDRESS(MX35_EPIT1_BASE_ADDR), MX35_INT_EPIT1);
.bitrate = 100000,
};
+#define TSC2007_IRQGPIO IMX_GPIO_NR(3, 2)
+static int tsc2007_get_pendown_state(void)
+{
+ return !gpio_get_value(TSC2007_IRQGPIO);
+}
+
static struct tsc2007_platform_data tsc2007_info = {
.model = 2007,
.x_plate_ohms = 180,
+ .get_pendown_state = tsc2007_get_pendown_state,
};
-#define TSC2007_IRQGPIO IMX_GPIO_NR(3, 2)
static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = {
{
I2C_BOARD_INFO("pcf8563", 0x51),
{
iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP;
iomux_v3_cfg_t power_key = NEW_PAD_CTRL(MX51_PAD_EIM_A27__GPIO2_21,
- PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP);
+ PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH);
imx51_soc_init();
gpio_set_value(MX53_EVK_FEC_PHY_RST, 1);
}
-static struct fec_platform_data mx53_evk_fec_pdata = {
+static const struct fec_platform_data mx53_evk_fec_pdata __initconst = {
.phy = PHY_INTERFACE_MODE_RMII,
};
gpio_set_value(LOCO_FEC_PHY_RST, 1);
}
-static struct fec_platform_data mx53_loco_fec_data = {
+static const struct fec_platform_data mx53_loco_fec_data __initconst = {
.phy = PHY_INTERFACE_MODE_RMII,
};
gpio_set_value(SMD_FEC_PHY_RST, 1);
}
-static struct fec_platform_data mx53_smd_fec_data = {
+static const struct fec_platform_data mx53_smd_fec_data __initconst = {
.phy = PHY_INTERFACE_MODE_RMII,
};
static void __init rx51_charger_init(void)
{
WARN_ON(gpio_request_one(RX51_USB_TRANSCEIVER_RST_GPIO,
- GPIOF_OUT_INIT_LOW, "isp1704_reset"));
+ GPIOF_OUT_INIT_HIGH, "isp1704_reset"));
platform_device_register(&rx51_charger_device);
}
pdata->reg_size = 4;
pdata->has_ccr = true;
}
+ pdata->set_clk_src = omap2_mcbsp_set_clk_src;
+ if (id == 1)
+ pdata->mux_signal = omap2_mcbsp1_mux_rx_clk;
if (oh->class->rev == MCBSP_CONFIG_TYPE3) {
if (id == 2)
name, oh->name);
return PTR_ERR(pdev);
}
- pdata->set_clk_src = omap2_mcbsp_set_clk_src;
- if (id == 1)
- pdata->mux_signal = omap2_mcbsp1_mux_rx_clk;
omap_mcbsp_count++;
return 0;
}
/* 3430ES1-only hwmods */
static __initdata struct omap_hwmod *omap3430es1_hwmods[] = {
- &omap3xxx_iva_hwmod,
&omap3430es1_dss_core_hwmod,
- &omap3xxx_mailbox_hwmod,
NULL
};
/* 3430ES2+-only hwmods */
static __initdata struct omap_hwmod *omap3430es2plus_hwmods[] = {
- &omap3xxx_iva_hwmod,
&omap3xxx_dss_core_hwmod,
&omap3xxx_usbhsotg_hwmod,
- &omap3xxx_mailbox_hwmod,
NULL
};
static struct platform_pwm_backlight_data smdkv210_bl_data = {
.pwm_id = 3,
+ .pwm_period_ns = 1000,
};
static void __init smdkv210_map_io(void)
MACHINE_START(AG5EVM, "ag5evm")
.map_io = ag5evm_map_io,
+ .nr_irqs = NR_IRQS_LEGACY,
.init_irq = sh73a0_init_irq,
.handle_irq = shmobile_handle_irq_gic,
.init_machine = ag5evm_init,
#include <linux/input/sh_keysc.h>
#include <linux/gpio_keys.h>
#include <linux/leds.h>
+#include <linux/platform_data/leds-renesas-tpu.h>
#include <linux/mmc/host.h>
#include <linux/mmc/sh_mmcif.h>
#include <linux/mfd/tmio.h>
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = gic_spi(33), /* PINTA2 @ PORT144 */
+ .start = SH73A0_PINT0_IRQ(2), /* PINTA2 */
.flags = IORESOURCE_IRQ,
},
};
#define GPIO_LED(n, g) { .name = n, .gpio = g }
static struct gpio_led gpio_leds[] = {
- GPIO_LED("V2513", GPIO_PORT153), /* PORT153 [TPU1T02] -> V2513 */
- GPIO_LED("V2514", GPIO_PORT199), /* PORT199 [TPU4TO1] -> V2514 */
- GPIO_LED("V2515", GPIO_PORT197), /* PORT197 [TPU2TO1] -> V2515 */
- GPIO_LED("KEYLED", GPIO_PORT163), /* PORT163 [TPU3TO0] -> KEYLED */
GPIO_LED("G", GPIO_PORT20), /* PORT20 [GPO0] -> LED7 -> "G" */
GPIO_LED("H", GPIO_PORT21), /* PORT21 [GPO1] -> LED8 -> "H" */
GPIO_LED("J", GPIO_PORT22), /* PORT22 [GPO2] -> LED9 -> "J" */
},
};
+/* TPU LED */
+static struct led_renesas_tpu_config led_renesas_tpu12_pdata = {
+ .name = "V2513",
+ .pin_gpio_fn = GPIO_FN_TPU1TO2,
+ .pin_gpio = GPIO_PORT153,
+ .channel_offset = 0x90,
+ .timer_bit = 2,
+ .max_brightness = 1000,
+};
+
+static struct resource tpu12_resources[] = {
+ [0] = {
+ .name = "TPU12",
+ .start = 0xe6610090,
+ .end = 0xe66100b5,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device leds_tpu12_device = {
+ .name = "leds-renesas-tpu",
+ .id = 12,
+ .dev = {
+ .platform_data = &led_renesas_tpu12_pdata,
+ },
+ .num_resources = ARRAY_SIZE(tpu12_resources),
+ .resource = tpu12_resources,
+};
+
+static struct led_renesas_tpu_config led_renesas_tpu41_pdata = {
+ .name = "V2514",
+ .pin_gpio_fn = GPIO_FN_TPU4TO1,
+ .pin_gpio = GPIO_PORT199,
+ .channel_offset = 0x50,
+ .timer_bit = 1,
+ .max_brightness = 1000,
+};
+
+static struct resource tpu41_resources[] = {
+ [0] = {
+ .name = "TPU41",
+ .start = 0xe6640050,
+ .end = 0xe6640075,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device leds_tpu41_device = {
+ .name = "leds-renesas-tpu",
+ .id = 41,
+ .dev = {
+ .platform_data = &led_renesas_tpu41_pdata,
+ },
+ .num_resources = ARRAY_SIZE(tpu41_resources),
+ .resource = tpu41_resources,
+};
+
+static struct led_renesas_tpu_config led_renesas_tpu21_pdata = {
+ .name = "V2515",
+ .pin_gpio_fn = GPIO_FN_TPU2TO1,
+ .pin_gpio = GPIO_PORT197,
+ .channel_offset = 0x50,
+ .timer_bit = 1,
+ .max_brightness = 1000,
+};
+
+static struct resource tpu21_resources[] = {
+ [0] = {
+ .name = "TPU21",
+ .start = 0xe6620050,
+ .end = 0xe6620075,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device leds_tpu21_device = {
+ .name = "leds-renesas-tpu",
+ .id = 21,
+ .dev = {
+ .platform_data = &led_renesas_tpu21_pdata,
+ },
+ .num_resources = ARRAY_SIZE(tpu21_resources),
+ .resource = tpu21_resources,
+};
+
+static struct led_renesas_tpu_config led_renesas_tpu30_pdata = {
+ .name = "KEYLED",
+ .pin_gpio_fn = GPIO_FN_TPU3TO0,
+ .pin_gpio = GPIO_PORT163,
+ .channel_offset = 0x10,
+ .timer_bit = 0,
+ .max_brightness = 1000,
+};
+
+static struct resource tpu30_resources[] = {
+ [0] = {
+ .name = "TPU30",
+ .start = 0xe6630010,
+ .end = 0xe6630035,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device leds_tpu30_device = {
+ .name = "leds-renesas-tpu",
+ .id = 30,
+ .dev = {
+ .platform_data = &led_renesas_tpu30_pdata,
+ },
+ .num_resources = ARRAY_SIZE(tpu30_resources),
+ .resource = tpu30_resources,
+};
+
/* MMCIF */
static struct resource mmcif_resources[] = {
[0] = {
&keysc_device,
&gpio_keys_device,
&gpio_leds_device,
+ &leds_tpu12_device,
+ &leds_tpu41_device,
+ &leds_tpu21_device,
+ &leds_tpu30_device,
&mmcif_device,
&sdhi0_device,
&sdhi1_device,
shmobile_setup_console();
}
-#define PINTER0A 0xe69000a0
-#define PINTCR0A 0xe69000b0
-
-void __init kota2_init_irq(void)
-{
- sh73a0_init_irq();
-
- /* setup PINT: enable PINTA2 as active low */
- __raw_writel(1 << 29, PINTER0A);
- __raw_writew(2 << 10, PINTCR0A);
-}
-
static void __init kota2_init(void)
{
sh73a0_pinmux_init();
MACHINE_START(KOTA2, "kota2")
.map_io = kota2_map_io,
- .init_irq = kota2_init_irq,
+ .nr_irqs = NR_IRQS_LEGACY,
+ .init_irq = sh73a0_init_irq,
.handle_irq = shmobile_handle_irq_gic,
.init_machine = kota2_init,
.timer = &kota2_timer,
.ops = &main_clk_ops,
};
+/* Divide Main clock by two */
+static struct clk main_div2_clk = {
+ .ops = &div2_clk_ops,
+ .parent = &main_clk,
+};
+
/* PLL0, PLL1, PLL2, PLL3 */
static unsigned long pll_recalc(struct clk *clk)
{
&extal1_div2_clk,
&extal2_div2_clk,
&main_clk,
+ &main_div2_clk,
&pll0_clk,
&pll1_clk,
&pll2_clk,
[DIV6_VCK1] = SH_CLK_DIV6(&pll1_div2_clk, VCLKCR1, 0),
[DIV6_VCK2] = SH_CLK_DIV6(&pll1_div2_clk, VCLKCR2, 0),
[DIV6_VCK3] = SH_CLK_DIV6(&pll1_div2_clk, VCLKCR3, 0),
- [DIV6_ZB1] = SH_CLK_DIV6(&pll1_div2_clk, ZBCKCR, 0),
+ [DIV6_ZB1] = SH_CLK_DIV6(&pll1_div2_clk, ZBCKCR, CLK_ENABLE_ON_INIT),
[DIV6_FLCTL] = SH_CLK_DIV6(&pll1_div2_clk, FLCKCR, 0),
[DIV6_SDHI0] = SH_CLK_DIV6(&pll1_div2_clk, SD0CKCR, 0),
[DIV6_SDHI1] = SH_CLK_DIV6(&pll1_div2_clk, SD1CKCR, 0),
MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
MSTP331, MSTP329, MSTP325, MSTP323, MSTP318,
MSTP314, MSTP313, MSTP312, MSTP311,
+ MSTP303, MSTP302, MSTP301, MSTP300,
MSTP411, MSTP410, MSTP403,
MSTP_NR };
[MSTP313] = MSTP(&div6_clks[DIV6_SDHI1], SMSTPCR3, 13, 0), /* SDHI1 */
[MSTP312] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 12, 0), /* MMCIF0 */
[MSTP311] = MSTP(&div6_clks[DIV6_SDHI2], SMSTPCR3, 11, 0), /* SDHI2 */
+ [MSTP303] = MSTP(&main_div2_clk, SMSTPCR3, 3, 0), /* TPU1 */
+ [MSTP302] = MSTP(&main_div2_clk, SMSTPCR3, 2, 0), /* TPU2 */
+ [MSTP301] = MSTP(&main_div2_clk, SMSTPCR3, 1, 0), /* TPU3 */
+ [MSTP300] = MSTP(&main_div2_clk, SMSTPCR3, 0, 0), /* TPU4 */
[MSTP411] = MSTP(&div4_clks[DIV4_HP], SMSTPCR4, 11, 0), /* IIC3 */
[MSTP410] = MSTP(&div4_clks[DIV4_HP], SMSTPCR4, 10, 0), /* IIC4 */
[MSTP403] = MSTP(&r_clk, SMSTPCR4, 3, 0), /* KEYSC */
CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */
CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMCIF0 */
CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP311]), /* SDHI2 */
+ CLKDEV_DEV_ID("leds-renesas-tpu.12", &mstp_clks[MSTP303]), /* TPU1 */
+ CLKDEV_DEV_ID("leds-renesas-tpu.21", &mstp_clks[MSTP302]), /* TPU2 */
+ CLKDEV_DEV_ID("leds-renesas-tpu.30", &mstp_clks[MSTP301]), /* TPU3 */
+ CLKDEV_DEV_ID("leds-renesas-tpu.41", &mstp_clks[MSTP300]), /* TPU4 */
CLKDEV_DEV_ID("i2c-sh_mobile.3", &mstp_clks[MSTP411]), /* I2C3 */
CLKDEV_DEV_ID("i2c-sh_mobile.4", &mstp_clks[MSTP410]), /* I2C4 */
CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[MSTP403]), /* KEYSC */
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include <asm/memblock.h>
#include "mm.h"
sort(&meminfo.bank, meminfo.nr_banks, sizeof(meminfo.bank[0]), meminfo_cmp, NULL);
- memblock_init();
for (i = 0; i < mi->nr_banks; i++)
memblock_add(mi->bank[i].start, mi->bank[i].size);
if (mdesc->reserve)
mdesc->reserve();
- memblock_analyze();
+ memblock_allow_resize();
memblock_dump_all();
}
orreq r10, r10, #1 << 6 @ set bit #6
mcreq p15, 0, r10, c15, c0, 1 @ write diagnostic register
#endif
-#ifdef CONFIG_ARM_ERRATA_751472
- cmp r6, #0x30 @ present prior to r3p0
+#if defined(CONFIG_ARM_ERRATA_751472) && defined(CONFIG_SMP)
+ ALT_SMP(cmp r6, #0x30) @ present prior to r3p0
+ ALT_UP_B(1f)
mrclt p15, 0, r10, c15, c0, 1 @ read diagnostic register
orrlt r10, r10, #1 << 11 @ set bit #11
mcrlt p15, 0, r10, c15, c0, 1 @ write diagnostic register
+1:
#endif
3: mov r10, #0
return oprofile_perf_init(ops);
}
-void __exit oprofile_arch_exit(void)
+void oprofile_arch_exit(void)
{
oprofile_perf_exit();
}
* the CPU clock speed on the fly.
*/
+#include <linux/module.h>
#include <linux/cpufreq.h>
#include <linux/clk.h>
#include <linux/err.h>
return ret;
}
-static int __init mxc_cpufreq_init(struct cpufreq_policy *policy)
+static int mxc_cpufreq_init(struct cpufreq_policy *policy)
{
int ret;
int i;
case MACH_TYPE_PCM043:
case MACH_TYPE_LILLY1131:
case MACH_TYPE_VPR200:
+ case MACH_TYPE_EUKREA_CPUIMX35SD:
uart_base = MX3X_UART1_BASE_ADDR;
break;
case MACH_TYPE_MAGX_ZN5:
#define MX3_PWMSAR 0x0C /* PWM Sample Register */
#define MX3_PWMPR 0x10 /* PWM Period Register */
#define MX3_PWMCR_PRESCALER(x) (((x - 1) & 0xFFF) << 4)
+#define MX3_PWMCR_DOZEEN (1 << 24)
+#define MX3_PWMCR_WAITEN (1 << 23)
+#define MX3_PWMCR_DBGEN (1 << 22)
#define MX3_PWMCR_CLKSRC_IPG_HIGH (2 << 16)
#define MX3_PWMCR_CLKSRC_IPG (1 << 16)
#define MX3_PWMCR_EN (1 << 0)
do_div(c, period_ns);
duty_cycles = c;
+ /*
+ * according to imx pwm RM, the real period value should be
+ * PERIOD value in PWMPR plus 2.
+ */
+ if (period_cycles > 2)
+ period_cycles -= 2;
+ else
+ period_cycles = 0;
+
writel(duty_cycles, pwm->mmio_base + MX3_PWMSAR);
writel(period_cycles, pwm->mmio_base + MX3_PWMPR);
- cr = MX3_PWMCR_PRESCALER(prescale) | MX3_PWMCR_EN;
+ cr = MX3_PWMCR_PRESCALER(prescale) |
+ MX3_PWMCR_DOZEEN | MX3_PWMCR_WAITEN |
+ MX3_PWMCR_DBGEN | MX3_PWMCR_EN;
if (cpu_is_mx25())
cr |= MX3_PWMCR_CLKSRC_IPG;
struct orion_gpio_chip *ochip;
struct irq_chip_generic *gc;
struct irq_chip_type *ct;
+ char gc_label[16];
if (orion_gpio_chip_count == ARRAY_SIZE(orion_gpio_chips))
return;
+ snprintf(gc_label, sizeof(gc_label), "orion_gpio%d",
+ orion_gpio_chip_count);
+
ochip = orion_gpio_chips + orion_gpio_chip_count;
- ochip->chip.label = "orion_gpio";
+ ochip->chip.label = kstrdup(gc_label, GFP_KERNEL);
ochip->chip.request = orion_gpio_request;
ochip->chip.direction_input = orion_gpio_direction_input;
ochip->chip.get = orion_gpio_get;
#include <linux/slab.h>
#include <linux/io.h>
#include <linux/pwm_backlight.h>
-#include <linux/slab.h>
#include <plat/devs.h>
#include <plat/gpio-cfg.h>
extern struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void);
extern struct s3c_iotimings *s3c_cpufreq_getiotimings(void);
-extern void s3c2410_iotiming_debugfs(struct seq_file *seq,
- struct s3c_cpufreq_config *cfg,
- union s3c_iobank *iob);
-
-extern void s3c2412_iotiming_debugfs(struct seq_file *seq,
- struct s3c_cpufreq_config *cfg,
- union s3c_iobank *iob);
-
#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUGFS
#define s3c_cpufreq_debugfs_call(x) x
#else
extern void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg);
#ifdef CONFIG_S3C2410_IOTIMING
+extern void s3c2410_iotiming_debugfs(struct seq_file *seq,
+ struct s3c_cpufreq_config *cfg,
+ union s3c_iobank *iob);
+
extern int s3c2410_iotiming_calc(struct s3c_cpufreq_config *cfg,
struct s3c_iotimings *iot);
extern void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg,
struct s3c_iotimings *iot);
#else
+#define s3c2410_iotiming_debugfs NULL
#define s3c2410_iotiming_calc NULL
#define s3c2410_iotiming_get NULL
#define s3c2410_iotiming_set NULL
/* S3C2412 compatible routines */
-extern int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
- struct s3c_iotimings *timings);
+#ifdef CONFIG_S3C2412_IOTIMING
+extern void s3c2412_iotiming_debugfs(struct seq_file *seq,
+ struct s3c_cpufreq_config *cfg,
+ union s3c_iobank *iob);
extern int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
struct s3c_iotimings *timings);
extern void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg,
struct s3c_iotimings *iot);
+#else
+#define s3c2412_iotiming_debugfs NULL
+#define s3c2412_iotiming_calc NULL
+#define s3c2412_iotiming_get NULL
+#define s3c2412_iotiming_set NULL
+#endif /* CONFIG_S3C2412_IOTIMING */
#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUG
#define s3c_freq_dbg(x...) printk(KERN_INFO x)
{
/* endless idle loop with no priority at all */
while (1) {
- tick_nohz_stop_sched_tick(1);
+ tick_nohz_idle_enter();
+ rcu_idle_enter();
while (!need_resched())
cpu_idle_sleep();
- tick_nohz_restart_sched_tick();
+ rcu_idle_exit();
+ tick_nohz_idle_exit();
preempt_enable_no_resched();
schedule();
preempt_disable();
#endif
if (!idle)
idle = default_idle;
- tick_nohz_stop_sched_tick(1);
+ tick_nohz_idle_enter();
+ rcu_idle_enter();
while (!need_resched())
idle();
- tick_nohz_restart_sched_tick();
+ rcu_idle_exit();
+ tick_nohz_idle_exit();
preempt_enable_no_resched();
schedule();
preempt_disable();
.rating = 300,
.read = read_cont_rotime,
.mask = CLOCKSOURCE_MASK(32),
- .shift = 10,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
static int __init etrax_init_cont_rotime(void)
{
- cont_rotime.mult = clocksource_khz2mult(100000, cont_rotime.shift);
- clocksource_register(&cont_rotime);
+ clocksource_register_khz(&cont_rotime, 100000);
return 0;
}
arch_initcall(etrax_init_cont_rotime);
select HAVE_ARCH_TRACEHOOK
select HAVE_DMA_API_DEBUG
select HAVE_GENERIC_HARDIRQS
+ select HAVE_MEMBLOCK
+ select HAVE_MEMBLOCK_NODE_MAP
+ select ARCH_DISCARD_MEMBLOCK
select GENERIC_IRQ_PROBE
select GENERIC_PENDING_IRQ if SMP
select IRQ_PER_CPU
MAX_NUMNODES will be 2^(This value).
If in doubt, use the default.
-config ARCH_POPULATES_NODE_MAP
- def_bool y
-
# VIRTUAL_MEM_MAP and FLAT_NODE_MEM_MAP are functionally equivalent.
# VIRTUAL_MEM_MAP has been retained for historical reasons.
config VIRTUAL_MEM_MAP
#include <linux/jiffies.h>
#include <asm/processor.h>
-typedef u64 cputime_t;
-typedef u64 cputime64_t;
+typedef u64 __nocast cputime_t;
+typedef u64 __nocast cputime64_t;
-#define cputime_zero ((cputime_t)0)
#define cputime_one_jiffy jiffies_to_cputime(1)
-#define cputime_max ((~((cputime_t)0) >> 1) - 1)
-#define cputime_add(__a, __b) ((__a) + (__b))
-#define cputime_sub(__a, __b) ((__a) - (__b))
-#define cputime_div(__a, __n) ((__a) / (__n))
-#define cputime_halve(__a) ((__a) >> 1)
-#define cputime_eq(__a, __b) ((__a) == (__b))
-#define cputime_gt(__a, __b) ((__a) > (__b))
-#define cputime_ge(__a, __b) ((__a) >= (__b))
-#define cputime_lt(__a, __b) ((__a) < (__b))
-#define cputime_le(__a, __b) ((__a) <= (__b))
-
-#define cputime64_zero ((cputime64_t)0)
-#define cputime64_add(__a, __b) ((__a) + (__b))
-#define cputime64_sub(__a, __b) ((__a) - (__b))
-#define cputime_to_cputime64(__ct) (__ct)
/*
* Convert cputime <-> jiffies (HZ)
*/
-#define cputime_to_jiffies(__ct) ((__ct) / (NSEC_PER_SEC / HZ))
-#define jiffies_to_cputime(__jif) ((__jif) * (NSEC_PER_SEC / HZ))
-#define cputime64_to_jiffies64(__ct) ((__ct) / (NSEC_PER_SEC / HZ))
-#define jiffies64_to_cputime64(__jif) ((__jif) * (NSEC_PER_SEC / HZ))
+#define cputime_to_jiffies(__ct) \
+ ((__force u64)(__ct) / (NSEC_PER_SEC / HZ))
+#define jiffies_to_cputime(__jif) \
+ (__force cputime_t)((__jif) * (NSEC_PER_SEC / HZ))
+#define cputime64_to_jiffies64(__ct) \
+ ((__force u64)(__ct) / (NSEC_PER_SEC / HZ))
+#define jiffies64_to_cputime64(__jif) \
+ (__force cputime64_t)((__jif) * (NSEC_PER_SEC / HZ))
/*
* Convert cputime <-> microseconds
*/
-#define cputime_to_usecs(__ct) ((__ct) / NSEC_PER_USEC)
-#define usecs_to_cputime(__usecs) ((__usecs) * NSEC_PER_USEC)
+#define cputime_to_usecs(__ct) \
+ ((__force u64)(__ct) / NSEC_PER_USEC)
+#define usecs_to_cputime(__usecs) \
+ (__force cputime_t)((__usecs) * NSEC_PER_USEC)
+#define usecs_to_cputime64(__usecs) \
+ (__force cputime64_t)((__usecs) * NSEC_PER_USEC)
/*
* Convert cputime <-> seconds
*/
-#define cputime_to_secs(__ct) ((__ct) / NSEC_PER_SEC)
-#define secs_to_cputime(__secs) ((__secs) * NSEC_PER_SEC)
+#define cputime_to_secs(__ct) \
+ ((__force u64)(__ct) / NSEC_PER_SEC)
+#define secs_to_cputime(__secs) \
+ (__force cputime_t)((__secs) * NSEC_PER_SEC)
/*
* Convert cputime <-> timespec (nsec)
*/
static inline cputime_t timespec_to_cputime(const struct timespec *val)
{
- cputime_t ret = val->tv_sec * NSEC_PER_SEC;
- return (ret + val->tv_nsec);
+ u64 ret = val->tv_sec * NSEC_PER_SEC + val->tv_nsec;
+ return (__force cputime_t) ret;
}
static inline void cputime_to_timespec(const cputime_t ct, struct timespec *val)
{
- val->tv_sec = ct / NSEC_PER_SEC;
- val->tv_nsec = ct % NSEC_PER_SEC;
+ val->tv_sec = (__force u64) ct / NSEC_PER_SEC;
+ val->tv_nsec = (__force u64) ct % NSEC_PER_SEC;
}
/*
*/
static inline cputime_t timeval_to_cputime(struct timeval *val)
{
- cputime_t ret = val->tv_sec * NSEC_PER_SEC;
- return (ret + val->tv_usec * NSEC_PER_USEC);
+ u64 ret = val->tv_sec * NSEC_PER_SEC + val->tv_usec * NSEC_PER_USEC;
+ return (__force cputime_t) ret;
}
static inline void cputime_to_timeval(const cputime_t ct, struct timeval *val)
{
- val->tv_sec = ct / NSEC_PER_SEC;
- val->tv_usec = (ct % NSEC_PER_SEC) / NSEC_PER_USEC;
+ val->tv_sec = (__force u64) ct / NSEC_PER_SEC;
+ val->tv_usec = ((__force u64) ct % NSEC_PER_SEC) / NSEC_PER_USEC;
}
/*
* Convert cputime <-> clock (USER_HZ)
*/
-#define cputime_to_clock_t(__ct) ((__ct) / (NSEC_PER_SEC / USER_HZ))
-#define clock_t_to_cputime(__x) ((__x) * (NSEC_PER_SEC / USER_HZ))
+#define cputime_to_clock_t(__ct) \
+ ((__force u64)(__ct) / (NSEC_PER_SEC / USER_HZ))
+#define clock_t_to_cputime(__x) \
+ (__force cputime_t)((__x) * (NSEC_PER_SEC / USER_HZ))
/*
* Convert cputime64 to clock.
*/
-#define cputime64_to_clock_t(__ct) cputime_to_clock_t((cputime_t)__ct)
+#define cputime64_to_clock_t(__ct) \
+ cputime_to_clock_t((__force cputime_t)__ct)
#endif /* CONFIG_VIRT_CPU_ACCOUNTING */
#endif /* __IA64_CPUTIME_H */
*/
#include <linux/bootmem.h>
#include <linux/efi.h>
+#include <linux/memblock.h>
#include <linux/mm.h>
#include <linux/nmi.h>
#include <linux/swap.h>
printk("Virtual mem_map starts at 0x%p\n", mem_map);
}
#else /* !CONFIG_VIRTUAL_MEM_MAP */
- add_active_range(0, 0, max_low_pfn);
+ memblock_add_node(0, PFN_PHYS(max_low_pfn), 0);
free_area_init_nodes(max_zone_pfns);
#endif /* !CONFIG_VIRTUAL_MEM_MAP */
zero_page_memmap_ptr = virt_to_page(ia64_imva(empty_zero_page));
#include <linux/bootmem.h>
#include <linux/efi.h>
#include <linux/elf.h>
+#include <linux/memblock.h>
#include <linux/mm.h>
#include <linux/mmzone.h>
#include <linux/module.h>
#endif
if (start < end)
- add_active_range(nid, __pa(start) >> PAGE_SHIFT,
- __pa(end) >> PAGE_SHIFT);
+ memblock_add_node(__pa(start), end - start, nid);
return 0;
}
.name = "timer",
.rating = 250,
.read = m68328_read_clk,
- .shift = 20,
.mask = CLOCKSOURCE_MASK(32),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
/* Enable timer 1 */
TCTL |= TCTL_TEN;
- m68328_clk.mult = clocksource_hz2mult(TICKS_PER_JIFFY*HZ, m68328_clk.shift);
- clocksource_register(&m68328_clk);
+ clocksource_register_hz(&m68328_clk, TICKS_PER_JIFFY*HZ);
}
/***************************************************************************/
.rating = 200,
.read = cf_dt_get_cycles,
.mask = CLOCKSOURCE_MASK(32),
- .shift = 20,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
__raw_writeb(0x00, DTER0);
__raw_writel(0x00000000, DTRR0);
__raw_writew(DMA_DTMR_CLK_DIV_16 | DMA_DTMR_ENABLE, DTMR0);
- clocksource_cf_dt.mult = clocksource_hz2mult(DMA_FREQ,
- clocksource_cf_dt.shift);
- return clocksource_register(&clocksource_cf_dt);
+ return clocksource_register_hz(&clocksource_cf_dt, DMA_FREQ);
}
arch_initcall(init_cf_dt_clocksource);
.name = "pit",
.rating = 100,
.read = pit_read_clk,
- .shift = 20,
.mask = CLOCKSOURCE_MASK(32),
};
setup_irq(MCFINT_VECBASE + MCFINT_PIT1, &pit_irq);
- pit_clk.mult = clocksource_hz2mult(FREQ, pit_clk.shift);
- clocksource_register(&pit_clk);
+ clocksource_register_hz(&pit_clk, FREQ);
}
/***************************************************************************/
.name = "slt",
.rating = 250,
.read = mcfslt_read_clk,
- .shift = 20,
.mask = CLOCKSOURCE_MASK(32),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
setup_irq(MCF_IRQ_TIMER, &mcfslt_timer_irq);
- mcfslt_clk.mult = clocksource_hz2mult(MCF_BUSCLK, mcfslt_clk.shift);
- clocksource_register(&mcfslt_clk);
+ clocksource_register_hz(&mcfslt_clk, MCF_BUSCLK);
#ifdef CONFIG_HIGHPROFILE
mcfslt_profile_init();
.name = "tmr",
.rating = 250,
.read = mcftmr_read_clk,
- .shift = 20,
.mask = CLOCKSOURCE_MASK(32),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
__raw_writew(MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 |
MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE, TA(MCFTIMER_TMR));
- mcftmr_clk.mult = clocksource_hz2mult(FREQ, mcftmr_clk.shift);
- clocksource_register(&mcftmr_clk);
+ clocksource_register_hz(&mcftmr_clk, FREQ);
setup_irq(MCF_IRQ_TIMER, &mcftmr_timer_irq);
+++ /dev/null
-/*
- * Copyright (C) 2008 Michal Simek <monstr@monstr.eu>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_MEMBLOCK_H
-#define _ASM_MICROBLAZE_MEMBLOCK_H
-
-#endif /* _ASM_MICROBLAZE_MEMBLOCK_H */
-
-
if (!idle)
idle = default_idle;
- tick_nohz_stop_sched_tick(1);
+ tick_nohz_idle_enter();
+ rcu_idle_enter();
while (!need_resched())
idle();
- tick_nohz_restart_sched_tick();
+ rcu_idle_exit();
+ tick_nohz_idle_exit();
preempt_enable_no_resched();
schedule();
of_scan_flat_dt(early_init_dt_scan_chosen, cmd_line);
/* Scan memory nodes and rebuild MEMBLOCKs */
- memblock_init();
of_scan_flat_dt(early_init_dt_scan_root, NULL);
of_scan_flat_dt(early_init_dt_scan_memory, NULL);
strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE);
parse_early_param();
- memblock_analyze();
+ memblock_allow_resize();
pr_debug("Phys. mem: %lx\n", (unsigned long) memblock_phys_mem_size());
select GENERIC_IRQ_SHOW
select HAVE_ARCH_JUMP_LABEL
select IRQ_FORCED_THREADING
+ select HAVE_MEMBLOCK
+ select HAVE_MEMBLOCK_NODE_MAP
+ select ARCH_DISCARD_MEMBLOCK
menu "Machine selection"
or have huge holes in the physical address space for other reasons.
See <file:Documentation/vm/numa> for more.
-config ARCH_POPULATES_NODE_MAP
- def_bool y
-
config ARCH_SPARSEMEM_ENABLE
bool
select SPARSEMEM_STATIC
/* endless idle loop with no priority at all */
while (1) {
- tick_nohz_stop_sched_tick(1);
+ tick_nohz_idle_enter();
+ rcu_idle_enter();
while (!need_resched() && cpu_online(cpu)) {
#ifdef CONFIG_MIPS_MT_SMTC
extern void smtc_idle_loop_hook(void);
system_state == SYSTEM_BOOTING))
play_dead();
#endif
- tick_nohz_restart_sched_tick();
+ rcu_idle_exit();
+ tick_nohz_idle_exit();
preempt_enable_no_resched();
schedule();
preempt_disable();
#include <linux/ioport.h>
#include <linux/export.h>
#include <linux/screen_info.h>
+#include <linux/memblock.h>
#include <linux/bootmem.h>
#include <linux/initrd.h>
#include <linux/root_dev.h>
continue;
#endif
- add_active_range(0, start, end);
+ memblock_add_node(PFN_PHYS(start), PFN_PHYS(end - start), 0);
}
/*
*/
#include <linux/init.h>
#include <linux/kernel.h>
+#include <linux/memblock.h>
#include <linux/mm.h>
#include <linux/mmzone.h>
#include <linux/module.h>
continue;
}
num_physpages += slot_psize;
- add_active_range(node, slot_getbasepfn(node, slot),
- slot_getbasepfn(node, slot) + slot_psize);
+ memblock_add_node(PFN_PHYS(slot_getbasepfn(node, slot)),
+ PFN_PHYS(slot_psize), node);
}
}
}
+++ /dev/null
-/*
- * OpenRISC Linux
- *
- * Linux architectural port borrowing liberally from similar works of
- * others. All original copyrights apply as per the original source
- * declaration.
- *
- * OpenRISC implementation:
- * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
- * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
- * et al.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __ASM_OPENRISC_MEMBLOCK_H
-#define __ASM_OPENRISC_MEMBLOCK_H
-
-/* empty */
-
-#endif /* __ASM_OPENRISC_MEMBLOCK_H */
/* endless idle loop with no priority at all */
while (1) {
- tick_nohz_stop_sched_tick(1);
+ tick_nohz_idle_enter();
+ rcu_idle_enter();
while (!need_resched()) {
check_pgt_cache();
set_thread_flag(TIF_POLLING_NRFLAG);
}
- tick_nohz_restart_sched_tick();
+ rcu_idle_exit();
+ tick_nohz_idle_exit();
preempt_enable_no_resched();
schedule();
preempt_disable();
of_scan_flat_dt(early_init_dt_scan_chosen, cmd_line);
/* Scan memory nodes and rebuild MEMBLOCKs */
- memblock_init();
of_scan_flat_dt(early_init_dt_scan_root, NULL);
of_scan_flat_dt(early_init_dt_scan_memory, NULL);
/* Save command line for /proc/cmdline and then parse parameters */
strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE);
- memblock_analyze();
+ memblock_allow_resize();
/* We must copy the flattend device tree from init memory to regular
* memory because the device tree references the strings in it
.rating = 300,
.read = read_cr16,
.mask = CLOCKSOURCE_MASK(BITS_PER_LONG),
- .mult = 0, /* to be set */
- .shift = 22,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
/* register at clocksource framework */
current_cr16_khz = PAGE0->mem_10msec/10; /* kHz */
- clocksource_cr16.mult = clocksource_khz2mult(current_cr16_khz,
- clocksource_cr16.shift);
- clocksource_register(&clocksource_cr16);
+ clocksource_register_khz(&clocksource_cr16, current_cr16_khz);
}
select HAVE_KRETPROBES
select HAVE_ARCH_TRACEHOOK
select HAVE_MEMBLOCK
+ select HAVE_MEMBLOCK_NODE_MAP
select HAVE_DMA_ATTRS
select HAVE_DMA_API_DEBUG
select USE_GENERIC_SMP_HELPERS if SMP
def_bool y
depends on (SMP && PPC_PSERIES) || PPC_PS3
-config ARCH_POPULATES_NODE_MAP
- def_bool y
-
config SYS_SUPPORTS_HUGETLBFS
bool
#include <asm/time.h>
#include <asm/param.h>
-typedef u64 cputime_t;
-typedef u64 cputime64_t;
-
-#define cputime_zero ((cputime_t)0)
-#define cputime_max ((~((cputime_t)0) >> 1) - 1)
-#define cputime_add(__a, __b) ((__a) + (__b))
-#define cputime_sub(__a, __b) ((__a) - (__b))
-#define cputime_div(__a, __n) ((__a) / (__n))
-#define cputime_halve(__a) ((__a) >> 1)
-#define cputime_eq(__a, __b) ((__a) == (__b))
-#define cputime_gt(__a, __b) ((__a) > (__b))
-#define cputime_ge(__a, __b) ((__a) >= (__b))
-#define cputime_lt(__a, __b) ((__a) < (__b))
-#define cputime_le(__a, __b) ((__a) <= (__b))
-
-#define cputime64_zero ((cputime64_t)0)
-#define cputime64_add(__a, __b) ((__a) + (__b))
-#define cputime64_sub(__a, __b) ((__a) - (__b))
-#define cputime_to_cputime64(__ct) (__ct)
+typedef u64 __nocast cputime_t;
+typedef u64 __nocast cputime64_t;
#ifdef __KERNEL__
static inline unsigned long cputime_to_jiffies(const cputime_t ct)
{
- return mulhdu(ct, __cputime_jiffies_factor);
+ return mulhdu((__force u64) ct, __cputime_jiffies_factor);
}
/* Estimate the scaled cputime by scaling the real cputime based on
{
if (cpu_has_feature(CPU_FTR_SPURR) &&
__get_cpu_var(cputime_last_delta))
- return ct * __get_cpu_var(cputime_scaled_last_delta) /
- __get_cpu_var(cputime_last_delta);
+ return (__force u64) ct *
+ __get_cpu_var(cputime_scaled_last_delta) /
+ __get_cpu_var(cputime_last_delta);
return ct;
}
static inline cputime_t jiffies_to_cputime(const unsigned long jif)
{
- cputime_t ct;
+ u64 ct;
unsigned long sec;
/* have to be a little careful about overflow */
}
if (sec)
ct += (cputime_t) sec * tb_ticks_per_sec;
- return ct;
+ return (__force cputime_t) ct;
}
static inline void setup_cputime_one_jiffy(void)
static inline cputime64_t jiffies64_to_cputime64(const u64 jif)
{
- cputime_t ct;
+ u64 ct;
u64 sec;
/* have to be a little careful about overflow */
do_div(ct, HZ);
}
if (sec)
- ct += (cputime_t) sec * tb_ticks_per_sec;
- return ct;
+ ct += (u64) sec * tb_ticks_per_sec;
+ return (__force cputime64_t) ct;
}
static inline u64 cputime64_to_jiffies64(const cputime_t ct)
{
- return mulhdu(ct, __cputime_jiffies_factor);
+ return mulhdu((__force u64) ct, __cputime_jiffies_factor);
}
/*
static inline unsigned long cputime_to_usecs(const cputime_t ct)
{
- return mulhdu(ct, __cputime_msec_factor) * USEC_PER_MSEC;
+ return mulhdu((__force u64) ct, __cputime_msec_factor) * USEC_PER_MSEC;
}
static inline cputime_t usecs_to_cputime(const unsigned long us)
{
- cputime_t ct;
+ u64 ct;
unsigned long sec;
/* have to be a little careful about overflow */
}
if (sec)
ct += (cputime_t) sec * tb_ticks_per_sec;
- return ct;
+ return (__force cputime_t) ct;
}
+#define usecs_to_cputime64(us) usecs_to_cputime(us)
+
/*
* Convert cputime <-> seconds
*/
static inline unsigned long cputime_to_secs(const cputime_t ct)
{
- return mulhdu(ct, __cputime_sec_factor);
+ return mulhdu((__force u64) ct, __cputime_sec_factor);
}
static inline cputime_t secs_to_cputime(const unsigned long sec)
{
- return (cputime_t) sec * tb_ticks_per_sec;
+ return (__force cputime_t)((u64) sec * tb_ticks_per_sec);
}
/*
*/
static inline void cputime_to_timespec(const cputime_t ct, struct timespec *p)
{
- u64 x = ct;
+ u64 x = (__force u64) ct;
unsigned int frac;
frac = do_div(x, tb_ticks_per_sec);
static inline cputime_t timespec_to_cputime(const struct timespec *p)
{
- cputime_t ct;
+ u64 ct;
ct = (u64) p->tv_nsec * tb_ticks_per_sec;
do_div(ct, 1000000000);
- return ct + (u64) p->tv_sec * tb_ticks_per_sec;
+ return (__force cputime_t)(ct + (u64) p->tv_sec * tb_ticks_per_sec);
}
/*
*/
static inline void cputime_to_timeval(const cputime_t ct, struct timeval *p)
{
- u64 x = ct;
+ u64 x = (__force u64) ct;
unsigned int frac;
frac = do_div(x, tb_ticks_per_sec);
static inline cputime_t timeval_to_cputime(const struct timeval *p)
{
- cputime_t ct;
+ u64 ct;
ct = (u64) p->tv_usec * tb_ticks_per_sec;
do_div(ct, 1000000);
- return ct + (u64) p->tv_sec * tb_ticks_per_sec;
+ return (__force cputime_t)(ct + (u64) p->tv_sec * tb_ticks_per_sec);
}
/*
static inline unsigned long cputime_to_clock_t(const cputime_t ct)
{
- return mulhdu(ct, __cputime_clockt_factor);
+ return mulhdu((__force u64) ct, __cputime_clockt_factor);
}
static inline cputime_t clock_t_to_cputime(const unsigned long clk)
{
- cputime_t ct;
+ u64 ct;
unsigned long sec;
/* have to be a little careful about overflow */
do_div(ct, USER_HZ);
}
if (sec)
- ct += (cputime_t) sec * tb_ticks_per_sec;
- return ct;
+ ct += (u64) sec * tb_ticks_per_sec;
+ return (__force cputime_t) ct;
}
#define cputime64_to_clock_t(ct) cputime_to_clock_t((cputime_t)(ct))
}
#endif
-static inline unsigned long compute_tlbie_rb(unsigned long v, unsigned long r,
- unsigned long pte_index)
-{
- unsigned long rb, va_low;
-
- rb = (v & ~0x7fUL) << 16; /* AVA field */
- va_low = pte_index >> 3;
- if (v & HPTE_V_SECONDARY)
- va_low = ~va_low;
- /* xor vsid from AVA */
- if (!(v & HPTE_V_1TB_SEG))
- va_low ^= v >> 12;
- else
- va_low ^= v >> 24;
- va_low &= 0x7ff;
- if (v & HPTE_V_LARGE) {
- rb |= 1; /* L field */
- if (cpu_has_feature(CPU_FTR_ARCH_206) &&
- (r & 0xff000)) {
- /* non-16MB large page, must be 64k */
- /* (masks depend on page size) */
- rb |= 0x1000; /* page encoding in LP field */
- rb |= (va_low & 0x7f) << 16; /* 7b of VA in AVA/LP field */
- rb |= (va_low & 0xfe); /* AVAL field (P7 doesn't seem to care) */
- }
- } else {
- /* 4kB page */
- rb |= (va_low & 0x7ff) << 12; /* remaining 11b of VA */
- }
- rb |= (v >> 54) & 0x300; /* B field */
- return rb;
-}
-
/* Magic register values loaded into r3 and r4 before the 'sc' assembly
* instruction for the OSI hypercalls */
#define OSI_SC_MAGIC_R3 0x113724FA
#define SPAPR_TCE_SHIFT 12
+static inline unsigned long compute_tlbie_rb(unsigned long v, unsigned long r,
+ unsigned long pte_index)
+{
+ unsigned long rb, va_low;
+
+ rb = (v & ~0x7fUL) << 16; /* AVA field */
+ va_low = pte_index >> 3;
+ if (v & HPTE_V_SECONDARY)
+ va_low = ~va_low;
+ /* xor vsid from AVA */
+ if (!(v & HPTE_V_1TB_SEG))
+ va_low ^= v >> 12;
+ else
+ va_low ^= v >> 24;
+ va_low &= 0x7ff;
+ if (v & HPTE_V_LARGE) {
+ rb |= 1; /* L field */
+ if (cpu_has_feature(CPU_FTR_ARCH_206) &&
+ (r & 0xff000)) {
+ /* non-16MB large page, must be 64k */
+ /* (masks depend on page size) */
+ rb |= 0x1000; /* page encoding in LP field */
+ rb |= (va_low & 0x7f) << 16; /* 7b of VA in AVA/LP field */
+ rb |= (va_low & 0xfe); /* AVAL field (P7 doesn't seem to care) */
+ }
+ } else {
+ /* 4kB page */
+ rb |= (va_low & 0x7ff) << 12; /* remaining 11b of VA */
+ }
+ rb |= (v >> 54) & 0x300; /* B field */
+ return rb;
+}
+
#endif /* __ASM_KVM_BOOK3S_64_H__ */
+++ /dev/null
-#ifndef _ASM_POWERPC_MEMBLOCK_H
-#define _ASM_POWERPC_MEMBLOCK_H
-
-#include <asm/udbg.h>
-
-#define MEMBLOCK_DBG(fmt...) udbg_printf(fmt)
-
-#endif /* _ASM_POWERPC_MEMBLOCK_H */
}
__setup("powersave=off", powersave_off);
+#if defined(CONFIG_PPC_PSERIES) && defined(CONFIG_TRACEPOINTS)
+static const bool idle_uses_rcu = 1;
+#else
+static const bool idle_uses_rcu;
+#endif
+
/*
* The body of the idle task.
*/
set_thread_flag(TIF_POLLING_NRFLAG);
while (1) {
- tick_nohz_stop_sched_tick(1);
+ tick_nohz_idle_enter();
+ if (!idle_uses_rcu)
+ rcu_idle_enter();
+
while (!need_resched() && !cpu_should_die()) {
ppc64_runlatch_off();
HMT_medium();
ppc64_runlatch_on();
- tick_nohz_restart_sched_tick();
+ if (!idle_uses_rcu)
+ rcu_idle_exit();
+ tick_nohz_idle_exit();
preempt_enable_no_resched();
if (cpu_should_die())
cpu_die();
unsigned long long crash_size, crash_base;
int ret;
- /* this is necessary because of memblock_phys_mem_size() */
- memblock_analyze();
-
/* use common parsing */
ret = parse_crashkernel(boot_command_line, memblock_phys_mem_size(),
&crash_size, &crash_base);
of_scan_flat_dt(early_init_dt_scan_chosen_ppc, cmd_line);
/* Scan memory nodes and rebuild MEMBLOCKs */
- memblock_init();
-
of_scan_flat_dt(early_init_dt_scan_root, NULL);
of_scan_flat_dt(early_init_dt_scan_memory_ppc, NULL);
early_reserve_mem();
phyp_dump_reserve_mem();
- limit = memory_limit;
- if (! limit) {
- phys_addr_t memsize;
-
- /* Ensure that total memory size is page-aligned, because
- * otherwise mark_bootmem() gets upset. */
- memblock_analyze();
- memsize = memblock_phys_mem_size();
- if ((memsize & PAGE_MASK) != memsize)
- limit = memsize & PAGE_MASK;
- }
+ /*
+ * Ensure that total memory size is page-aligned, because otherwise
+ * mark_bootmem() gets upset.
+ */
+ limit = ALIGN(memory_limit ?: memblock_phys_mem_size(), PAGE_SIZE);
memblock_enforce_memory_limit(limit);
- memblock_analyze();
+ memblock_allow_resize();
memblock_dump_all();
DBG("Phys. mem: %llx\n", memblock_phys_mem_size());
tpaca->kvm_hstate.napping = 0;
vcpu->cpu = vc->pcpu;
smp_wmb();
-#ifdef CONFIG_PPC_ICP_NATIVE
+#if defined(CONFIG_PPC_ICP_NATIVE) && defined(CONFIG_SMP)
if (vcpu->arch.ptid) {
tpaca->cpu_start = 0x80;
wmb();
ulong cmd = kvmppc_get_gpr(vcpu, 3);
int i;
+#ifdef CONFIG_KVM_BOOK3S_64_PR
if (kvmppc_h_pr(vcpu, cmd) == EMULATE_DONE) {
r = RESUME_GUEST;
break;
}
+#endif
run->papr_hcall.nr = cmd;
for (i = 0; i < 9; ++i) {
#include <linux/kvm_host.h>
#include <linux/slab.h>
#include <linux/err.h>
+#include <linux/export.h>
#include <asm/reg.h>
#include <asm/cputable.h>
if (memblock.memory.cnt > 1) {
#ifndef CONFIG_WII
- memblock.memory.cnt = 1;
- memblock_analyze();
+ memblock_enforce_memory_limit(memblock.memory.regions[0].size);
printk(KERN_WARNING "Only using first contiguous memory region");
#else
wii_memory_fixups();
#ifndef CONFIG_HIGHMEM
total_memory = total_lowmem;
memblock_enforce_memory_limit(total_lowmem);
- memblock_analyze();
#endif /* CONFIG_HIGHMEM */
}
unsigned long start_pfn, end_pfn;
start_pfn = memblock_region_memory_base_pfn(reg);
end_pfn = memblock_region_memory_end_pfn(reg);
- add_active_range(0, start_pfn, end_pfn);
+ memblock_set_node(0, (phys_addr_t)ULLONG_MAX, 0);
}
/* Add all physical memory to the bootmem map, mark each area
}
/*
- * get_active_region_work_fn - A helper function for get_node_active_region
- * Returns datax set to the start_pfn and end_pfn if they contain
- * the initial value of datax->start_pfn between them
- * @start_pfn: start page(inclusive) of region to check
- * @end_pfn: end page(exclusive) of region to check
- * @datax: comes in with ->start_pfn set to value to search for and
- * goes out with active range if it contains it
- * Returns 1 if search value is in range else 0
- */
-static int __init get_active_region_work_fn(unsigned long start_pfn,
- unsigned long end_pfn, void *datax)
-{
- struct node_active_region *data;
- data = (struct node_active_region *)datax;
-
- if (start_pfn <= data->start_pfn && end_pfn > data->start_pfn) {
- data->start_pfn = start_pfn;
- data->end_pfn = end_pfn;
- return 1;
- }
- return 0;
-
-}
-
-/*
- * get_node_active_region - Return active region containing start_pfn
+ * get_node_active_region - Return active region containing pfn
* Active range returned is empty if none found.
- * @start_pfn: The page to return the region for.
- * @node_ar: Returned set to the active region containing start_pfn
+ * @pfn: The page to return the region for
+ * @node_ar: Returned set to the active region containing @pfn
*/
-static void __init get_node_active_region(unsigned long start_pfn,
- struct node_active_region *node_ar)
+static void __init get_node_active_region(unsigned long pfn,
+ struct node_active_region *node_ar)
{
- int nid = early_pfn_to_nid(start_pfn);
+ unsigned long start_pfn, end_pfn;
+ int i, nid;
- node_ar->nid = nid;
- node_ar->start_pfn = start_pfn;
- node_ar->end_pfn = start_pfn;
- work_with_active_regions(nid, get_active_region_work_fn, node_ar);
+ for_each_mem_pfn_range(i, MAX_NUMNODES, &start_pfn, &end_pfn, &nid) {
+ if (pfn >= start_pfn && pfn < end_pfn) {
+ node_ar->nid = nid;
+ node_ar->start_pfn = start_pfn;
+ node_ar->end_pfn = end_pfn;
+ break;
+ }
+ }
}
static void map_cpu_to_node(int cpu, int node)
node_set_online(nid);
sz = numa_enforce_memory_limit(base, size);
if (sz)
- add_active_range(nid, base >> PAGE_SHIFT,
- (base >> PAGE_SHIFT)
- + (sz >> PAGE_SHIFT));
+ memblock_set_node(base, sz, nid);
} while (--ranges);
}
}
continue;
}
- add_active_range(nid, start >> PAGE_SHIFT,
- (start >> PAGE_SHIFT) + (size >> PAGE_SHIFT));
+ memblock_set_node(start, size, nid);
if (--ranges)
goto new_range;
end_pfn = memblock_region_memory_end_pfn(reg);
fake_numa_create_new_node(end_pfn, &nid);
- add_active_range(nid, start_pfn, end_pfn);
+ memblock_set_node(PFN_PHYS(start_pfn),
+ PFN_PHYS(end_pfn - start_pfn), nid);
node_set_online(nid);
}
}
projects / ~shefty / rdma-dev.git / commitdiff