Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
authorLinus Torvalds <torvalds@linux-foundation.org>
Wed, 20 Feb 2013 01:49:41 +0000 (17:49 -0800)
committerLinus Torvalds <torvalds@linux-foundation.org>
Wed, 20 Feb 2013 01:49:41 +0000 (17:49 -0800)
Pull perf changes from Ingo Molnar:
 "There are lots of improvements, the biggest changes are:

  Main kernel side changes:

   - Improve uprobes performance by adding 'pre-filtering' support, by
     Oleg Nesterov.

   - Make some POWER7 events available in sysfs, equivalent to what was
     done on x86, from Sukadev Bhattiprolu.

   - tracing updates by Steve Rostedt - mostly misc fixes and smaller
     improvements.

   - Use perf/event tracing to report PCI Express advanced errors, by
     Tony Luck.

   - Enable northbridge performance counters on AMD family 15h, by Jacob
     Shin.

   - This tracing commit:

        tracing: Remove the extra 4 bytes of padding in events

     changes the ABI.  All involved parties (PowerTop in particular)
     seem to agree that it's safe to do now with the introduction of
     libtraceevent, but the devil is in the details ...

  Main tooling side changes:

   - Add 'event group view', from Namyung Kim:

     To use it, 'perf record' should group events when recording.  And
     then perf report parses the saved group relation from file header
     and prints them together if --group option is provided.  You can
     use the 'perf evlist' command to see event group information:

        $ perf record -e '{ref-cycles,cycles}' noploop 1
        [ perf record: Woken up 2 times to write data ]
        [ perf record: Captured and wrote 0.385 MB perf.data (~16807 samples) ]

        $ perf evlist --group
        {ref-cycles,cycles}

     With this example, default perf report will show you each event
     separately.

     You can use --group option to enable event group view:

        $ perf report --group
        ...
        # group: {ref-cycles,cycles}
        # ========
        # Samples: 7K of event 'anon group { ref-cycles, cycles }'
        # Event count (approx.): 6876107743
        #
        #         Overhead  Command      Shared Object                      Symbol
        # ................  .......  .................  ..........................
            99.84%  99.76%  noploop  noploop            [.] main
             0.07%   0.00%  noploop  ld-2.15.so         [.] strcmp
             0.03%   0.00%  noploop  [kernel.kallsyms]  [k] timerqueue_del
             0.03%   0.03%  noploop  [kernel.kallsyms]  [k] sched_clock_cpu
             0.02%   0.00%  noploop  [kernel.kallsyms]  [k] account_user_time
             0.01%   0.00%  noploop  [kernel.kallsyms]  [k] __alloc_pages_nodemask
             0.00%   0.00%  noploop  [kernel.kallsyms]  [k] native_write_msr_safe
             0.00%   0.11%  noploop  [kernel.kallsyms]  [k] _raw_spin_lock
             0.00%   0.06%  noploop  [kernel.kallsyms]  [k] find_get_page
             0.00%   0.02%  noploop  [kernel.kallsyms]  [k] rcu_check_callbacks
             0.00%   0.02%  noploop  [kernel.kallsyms]  [k] __current_kernel_time

     As you can see the Overhead column now contains both of ref-cycles
     and cycles and header line shows group information also - 'anon
     group { ref-cycles, cycles }'.  The output is sorted by period of
     group leader first.

   - Initial GTK+ annotate browser, from Namhyung Kim.

   - Add option for runtime switching perf data file in perf report,
     just press 's' and a menu with the valid files found in the current
     directory will be presented, from Feng Tang.

   - Add support to display whole group data for raw columns, from Jiri
     Olsa.

   - Add per processor socket count aggregation in perf stat, from
     Stephane Eranian.

   - Add interval printing in 'perf stat', from Stephane Eranian.

   - 'perf test' improvements

   - Add support for wildcards in tracepoint system name, from Jiri
     Olsa.

   - Add anonymous huge page recognition, from Joshua Zhu.

   - perf build-id cache now can show DSOs present in a perf.data file
     that are not in the cache, to integrate with build-id servers being
     put in place by organizations such as Fedora.

   - perf top now shares more of the evsel config/creation routines with
     'record', paving the way for further integration like 'top'
     snapshots, etc.

   - perf top now supports DWARF callchains.

   - Fix mmap limitations on 32-bit, fix from David Miller.

   - 'perf bench numa mem' NUMA performance measurement suite

   - ... and lots of fixes, performance improvements, cleanups and other
     improvements I failed to list - see the shortlog and git log for
     details."

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (270 commits)
  perf/x86/amd: Enable northbridge performance counters on AMD family 15h
  perf/hwbp: Fix cleanup in case of kzalloc failure
  perf tools: Fix build with bison 2.3 and older.
  perf tools: Limit unwind support to x86 archs
  perf annotate: Make it to be able to skip unannotatable symbols
  perf gtk/annotate: Fail early if it can't annotate
  perf gtk/annotate: Show source lines with gray color
  perf gtk/annotate: Support multiple event annotation
  perf ui/gtk: Implement basic GTK2 annotation browser
  perf annotate: Fix warning message on a missing vmlinux
  perf buildid-cache: Add --update option
  uprobes/perf: Avoid uprobe_apply() whenever possible
  uprobes/perf: Teach trace_uprobe/perf code to use UPROBE_HANDLER_REMOVE
  uprobes/perf: Teach trace_uprobe/perf code to pre-filter
  uprobes/perf: Teach trace_uprobe/perf code to track the active perf_event's
  uprobes: Introduce uprobe_apply()
  perf: Introduce hw_perf_event->tp_target and ->tp_list
  uprobes/perf: Always increment trace_uprobe->nhit
  uprobes/tracing: Kill uprobe_trace_consumer, embed uprobe_consumer into trace_uprobe
  uprobes/tracing: Introduce is_trace_uprobe_enabled()
  ...

624 files changed:
Documentation/atomic_ops.txt
Documentation/device-mapper/dm-raid.txt
Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
Documentation/hid/hid-sensor.txt [changed mode: 0755->0644]
Documentation/kernel-parameters.txt
Documentation/memory-barriers.txt
Documentation/x86/boot.txt
Documentation/x86/zero-page.txt
MAINTAINERS
Makefile
arch/alpha/Kconfig
arch/arm/Kconfig
arch/arm/boot/dts/armada-370-db.dts
arch/arm/boot/dts/armada-xp-mv78230.dtsi
arch/arm/boot/dts/armada-xp-mv78260.dtsi
arch/arm/boot/dts/armada-xp-mv78460.dtsi
arch/arm/boot/dts/at91rm9200.dtsi
arch/arm/boot/dts/at91sam9x5.dtsi
arch/arm/boot/dts/cros5250-common.dtsi
arch/arm/boot/dts/dove-cubox.dts
arch/arm/boot/dts/exynos5250-smdk5250.dts
arch/arm/boot/dts/kirkwood-ns2-common.dtsi
arch/arm/boot/dts/kirkwood.dtsi
arch/arm/boot/dts/kizbox.dts
arch/arm/boot/dts/sunxi.dtsi
arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
arch/arm/common/gic.c
arch/arm/configs/at91_dt_defconfig
arch/arm/include/asm/memory.h
arch/arm/include/asm/smp_scu.h
arch/arm/kernel/debug.S
arch/arm/kernel/head.S
arch/arm/kernel/hyp-stub.S
arch/arm/kernel/smp_scu.c
arch/arm/mach-at91/setup.c
arch/arm/mach-exynos/Kconfig
arch/arm/mach-highbank/highbank.c
arch/arm/mach-highbank/sysregs.h
arch/arm/mach-imx/Kconfig
arch/arm/mach-imx/clk-imx6q.c
arch/arm/mach-imx/common.h
arch/arm/mach-imx/devices/platform-imx-fb.c
arch/arm/mach-imx/hotplug.c
arch/arm/mach-imx/iram.h [deleted file]
arch/arm/mach-imx/iram_alloc.c
arch/arm/mach-imx/platsmp.c
arch/arm/mach-imx/pm-imx6q.c
arch/arm/mach-integrator/pci_v3.c
arch/arm/mach-kirkwood/board-ns2.c
arch/arm/mach-mvebu/Makefile
arch/arm/mach-omap2/board-omap4panda.c
arch/arm/mach-omap2/cclock2420_data.c
arch/arm/mach-omap2/cclock2430_data.c
arch/arm/mach-omap2/cclock44xx_data.c
arch/arm/mach-omap2/devices.c
arch/arm/mach-omap2/drm.c
arch/arm/mach-omap2/omap_hwmod_44xx_data.c
arch/arm/mach-omap2/timer.c
arch/arm/mach-realview/include/mach/irqs-eb.h
arch/arm/mach-s3c64xx/mach-crag6410-module.c
arch/arm/mach-s3c64xx/pm.c
arch/arm/mm/dma-mapping.c
arch/arm/mm/mmu.c
arch/arm/plat-versatile/headsmp.S
arch/arm/vfp/entry.S
arch/arm/vfp/vfphw.S
arch/arm64/Kconfig
arch/avr32/include/asm/dma-mapping.h
arch/blackfin/Kconfig
arch/blackfin/include/asm/dma-mapping.h
arch/c6x/include/asm/dma-mapping.h
arch/cris/include/asm/dma-mapping.h
arch/frv/Kconfig
arch/frv/include/asm/dma-mapping.h
arch/hexagon/Kconfig
arch/ia64/Kconfig
arch/m68k/include/asm/dma-mapping.h
arch/m68k/include/asm/processor.h
arch/mips/Kconfig
arch/mips/bcm47xx/Kconfig
arch/mips/cavium-octeon/executive/cvmx-l2c.c
arch/mips/include/asm/break.h [deleted file]
arch/mips/include/asm/dsp.h
arch/mips/include/asm/inst.h
arch/mips/include/asm/mach-pnx833x/war.h
arch/mips/include/asm/pgtable-64.h
arch/mips/include/uapi/asm/Kbuild
arch/mips/include/uapi/asm/break.h [new file with mode: 0644]
arch/mips/kernel/ftrace.c
arch/mips/kernel/mcount.S
arch/mips/kernel/vpe.c
arch/mips/lantiq/irq.c
arch/mips/lib/delay.c
arch/mips/mm/ioremap.c
arch/mips/mm/mmap.c
arch/mips/netlogic/xlr/setup.c
arch/mips/pci/pci-ar71xx.c
arch/mips/pci/pci-ar724x.c
arch/mn10300/include/asm/dma-mapping.h
arch/parisc/Kconfig
arch/parisc/include/asm/dma-mapping.h
arch/powerpc/Kconfig
arch/powerpc/kernel/entry_32.S
arch/powerpc/kernel/entry_64.S
arch/powerpc/kernel/kgdb.c
arch/powerpc/kernel/time.c
arch/powerpc/kvm/emulate.c
arch/powerpc/mm/hash_low_64.S
arch/powerpc/oprofile/op_model_power4.c
arch/powerpc/platforms/pasemi/cpufreq.c
arch/s390/Kconfig
arch/s390/include/asm/pgtable.h
arch/s390/kernel/time.c
arch/sh/Kconfig
arch/sparc/Kconfig
arch/sparc/include/asm/pgtable_64.h
arch/sparc/kernel/sbus.c
arch/sparc/mm/gup.c
arch/tile/Kconfig
arch/tile/include/asm/io.h
arch/tile/include/asm/irqflags.h
arch/tile/include/uapi/arch/interrupts_32.h
arch/tile/include/uapi/arch/interrupts_64.h
arch/tile/kernel/intvec_64.S
arch/tile/kernel/process.c
arch/tile/kernel/reboot.c
arch/tile/kernel/setup.c
arch/tile/kernel/stack.c
arch/tile/lib/cacheflush.c
arch/tile/lib/cpumask.c
arch/tile/lib/exports.c
arch/tile/mm/homecache.c
arch/x86/Kconfig
arch/x86/boot/Makefile
arch/x86/boot/compressed/eboot.c
arch/x86/boot/compressed/head_32.S
arch/x86/boot/compressed/head_64.S
arch/x86/boot/header.S
arch/x86/boot/setup.ld
arch/x86/boot/tools/build.c
arch/x86/ia32/ia32entry.S
arch/x86/include/asm/efi.h
arch/x86/include/asm/mce.h
arch/x86/include/asm/pgtable.h
arch/x86/include/asm/uv/uv.h
arch/x86/include/uapi/asm/bootparam.h
arch/x86/include/uapi/asm/mce.h
arch/x86/kernel/apic/x2apic_phys.c
arch/x86/kernel/cpu/intel_cacheinfo.c
arch/x86/kernel/cpu/perf_event_intel.c
arch/x86/kernel/cpu/perf_event_p6.c
arch/x86/kernel/entry_64.S
arch/x86/kernel/head_32.S
arch/x86/kernel/msr.c
arch/x86/kernel/pci-dma.c
arch/x86/kernel/reboot.c
arch/x86/kernel/setup.c
arch/x86/mm/fault.c
arch/x86/mm/init_64.c
arch/x86/platform/efi/efi.c
arch/x86/platform/efi/efi_64.c
arch/x86/platform/uv/tlb_uv.c
arch/x86/tools/insn_sanity.c
arch/x86/tools/relocs.c
arch/x86/xen/enlighten.c
arch/x86/xen/suspend.c
arch/x86/xen/xen-asm_32.S
arch/x86/xen/xen-ops.h
arch/xtensa/include/asm/dma-mapping.h
block/genhd.c
drivers/acpi/apei/apei-base.c
drivers/acpi/osl.c
drivers/acpi/processor_idle.c
drivers/acpi/processor_perflib.c
drivers/atm/iphase.h
drivers/base/regmap/regmap-debugfs.c
drivers/base/regmap/regmap.c
drivers/bcma/bcma_private.h
drivers/bcma/driver_chipcommon_nflash.c
drivers/bcma/driver_gpio.c
drivers/bcma/main.c
drivers/block/drbd/drbd_req.c
drivers/block/drbd/drbd_req.h
drivers/block/drbd/drbd_state.c
drivers/block/mtip32xx/mtip32xx.c
drivers/block/sunvdc.c
drivers/block/xen-blkback/blkback.c
drivers/block/xen-blkfront.c
drivers/bluetooth/ath3k.c
drivers/bluetooth/btusb.c
drivers/char/virtio_console.c
drivers/clk/mvebu/clk-cpu.c
drivers/cpufreq/Kconfig.x86
drivers/cpufreq/acpi-cpufreq.c
drivers/cpufreq/cpufreq-cpu0.c
drivers/cpufreq/omap-cpufreq.c
drivers/devfreq/devfreq.c
drivers/devfreq/exynos4_bus.c
drivers/dma/imx-dma.c
drivers/dma/ioat/dma_v3.c
drivers/dma/tegra20-apb-dma.c
drivers/edac/edac_mc.c
drivers/edac/edac_pci_sysfs.c
drivers/firmware/dmi_scan.c
drivers/firmware/efivars.c
drivers/firmware/iscsi_ibft_find.c
drivers/gpu/drm/exynos/Kconfig
drivers/gpu/drm/exynos/exynos_drm_connector.c
drivers/gpu/drm/exynos/exynos_drm_dmabuf.c
drivers/gpu/drm/exynos/exynos_drm_drv.h
drivers/gpu/drm/exynos/exynos_drm_g2d.c
drivers/gpu/drm/exynos/exynos_drm_hdmi.c
drivers/gpu/drm/exynos/exynos_drm_hdmi.h
drivers/gpu/drm/exynos/exynos_drm_ipp.c
drivers/gpu/drm/exynos/exynos_drm_rotator.c
drivers/gpu/drm/exynos/exynos_drm_vidi.c
drivers/gpu/drm/exynos/exynos_hdmi.c
drivers/gpu/drm/exynos/exynos_mixer.c
drivers/gpu/drm/i915/i915_debugfs.c
drivers/gpu/drm/i915/i915_reg.h
drivers/gpu/drm/i915/intel_ringbuffer.c
drivers/gpu/drm/nouveau/core/core/falcon.c
drivers/gpu/drm/nouveau/core/core/subdev.c
drivers/gpu/drm/nouveau/core/include/core/object.h
drivers/gpu/drm/nouveau/core/subdev/fb/base.c
drivers/gpu/drm/nouveau/core/subdev/fb/nv50.c
drivers/gpu/drm/nouveau/nouveau_bo.c
drivers/gpu/drm/nouveau/nouveau_drm.c
drivers/gpu/drm/radeon/evergreen.c
drivers/gpu/drm/radeon/evergreen_cs.c
drivers/gpu/drm/radeon/ni.c
drivers/gpu/drm/radeon/r600.c
drivers/gpu/drm/radeon/r600_cs.c
drivers/gpu/drm/radeon/radeon_asic.c
drivers/gpu/drm/radeon/radeon_combios.c
drivers/gpu/drm/radeon/radeon_cs.c
drivers/gpu/drm/radeon/radeon_cursor.c
drivers/gpu/drm/radeon/radeon_device.c
drivers/gpu/drm/radeon/radeon_display.c
drivers/gpu/drm/radeon/radeon_ring.c
drivers/gpu/drm/radeon/radeon_ttm.c
drivers/gpu/drm/radeon/reg_srcs/cayman
drivers/gpu/drm/radeon/rv515.c
drivers/gpu/drm/ttm/ttm_bo_util.c
drivers/hid/hid-ids.h
drivers/hid/i2c-hid/i2c-hid.c
drivers/hid/usbhid/hid-quirks.c
drivers/i2c/busses/i2c-designware-core.c
drivers/i2c/busses/i2c-mxs.c
drivers/i2c/busses/i2c-omap.c
drivers/i2c/busses/i2c-sirf.c
drivers/i2c/muxes/i2c-mux-pinctrl.c
drivers/idle/intel_idle.c
drivers/infiniband/hw/qib/qib_qp.c
drivers/infiniband/ulp/ipoib/ipoib_cm.c
drivers/infiniband/ulp/ipoib/ipoib_ib.c
drivers/input/input.c
drivers/input/joystick/analog.c
drivers/input/keyboard/lm8323.c
drivers/input/tablet/wacom_sys.c
drivers/iommu/amd_iommu_init.c
drivers/iommu/intel-iommu.c
drivers/isdn/gigaset/capi.c
drivers/md/dm-raid.c
drivers/md/dm-thin.c
drivers/md/dm.c
drivers/media/dvb-core/dvb_frontend.c
drivers/media/platform/coda.c
drivers/media/radio/radio-keene.c
drivers/media/radio/radio-si4713.c
drivers/media/radio/radio-wl1273.c
drivers/media/radio/wl128x/fmdrv_v4l2.c
drivers/mfd/Kconfig
drivers/mfd/ab8500-core.c
drivers/mfd/arizona-core.c
drivers/mfd/arizona-irq.c
drivers/mfd/da9052-i2c.c
drivers/mfd/db8500-prcmu.c
drivers/mfd/max77686.c
drivers/mfd/max77693.c
drivers/mfd/pcf50633-core.c
drivers/mfd/rtl8411.c
drivers/mfd/rts5209.c
drivers/mfd/rts5229.c
drivers/mfd/rtsx_pcr.c
drivers/mfd/tc3589x.c
drivers/mfd/twl4030-power.c
drivers/mfd/vexpress-config.c
drivers/mfd/vexpress-sysreg.c
drivers/mfd/wm5102-tables.c
drivers/mmc/host/mvsdio.c
drivers/mmc/host/rtsx_pci_sdmmc.c
drivers/mtd/devices/Kconfig
drivers/mtd/maps/physmap_of.c
drivers/mtd/nand/bcm47xxnflash/ops_bcm4706.c
drivers/mtd/nand/davinci_nand.c
drivers/mtd/nand/nand_base.c
drivers/net/bonding/bond_sysfs.c
drivers/net/can/c_can/c_can.c
drivers/net/can/pch_can.c
drivers/net/can/ti_hecc.c
drivers/net/ethernet/3com/3c574_cs.c
drivers/net/ethernet/atheros/atl1c/atl1c_main.c
drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
drivers/net/ethernet/broadcom/tg3.c
drivers/net/ethernet/cadence/macb.c
drivers/net/ethernet/calxeda/xgmac.c
drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
drivers/net/ethernet/emulex/benet/be.h
drivers/net/ethernet/emulex/benet/be_main.c
drivers/net/ethernet/intel/e1000e/defines.h
drivers/net/ethernet/intel/e1000e/e1000.h
drivers/net/ethernet/intel/e1000e/ethtool.c
drivers/net/ethernet/intel/e1000e/hw.h
drivers/net/ethernet/intel/e1000e/ich8lan.c
drivers/net/ethernet/intel/e1000e/netdev.c
drivers/net/ethernet/intel/ixgbe/Makefile
drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c
drivers/net/ethernet/mellanox/mlx4/en_tx.c
drivers/net/ethernet/mellanox/mlx4/main.c
drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c
drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c
drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c
drivers/net/ethernet/realtek/r8169.c
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
drivers/net/ethernet/via/via-rhine.c
drivers/net/hyperv/hyperv_net.h
drivers/net/hyperv/netvsc_drv.c
drivers/net/loopback.c
drivers/net/macvlan.c
drivers/net/phy/icplus.c
drivers/net/phy/marvell.c
drivers/net/tun.c
drivers/net/usb/cdc_mbim.c
drivers/net/usb/cdc_ncm.c
drivers/net/usb/dm9601.c
drivers/net/usb/qmi_wwan.c
drivers/net/usb/usbnet.c
drivers/net/virtio_net.c
drivers/net/vmxnet3/vmxnet3_drv.c
drivers/net/wireless/ath/ath9k/ar9003_calib.c
drivers/net/wireless/ath/ath9k/ar9003_phy.c
drivers/net/wireless/ath/ath9k/ath9k.h
drivers/net/wireless/ath/ath9k/beacon.c
drivers/net/wireless/ath/ath9k/debug.c
drivers/net/wireless/ath/ath9k/debug.h
drivers/net/wireless/ath/ath9k/htc_hst.c
drivers/net/wireless/ath/ath9k/hw.h
drivers/net/wireless/ath/ath9k/main.c
drivers/net/wireless/ath/ath9k/recv.c
drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.h
drivers/net/wireless/brcm80211/brcmsmac/main.c
drivers/net/wireless/brcm80211/brcmsmac/pub.h
drivers/net/wireless/iwlegacy/common.c
drivers/net/wireless/iwlwifi/dvm/tx.c
drivers/net/wireless/mwifiex/cfg80211.c
drivers/net/wireless/mwifiex/pcie.c
drivers/net/wireless/mwifiex/scan.c
drivers/net/wireless/mwifiex/sta_ioctl.c
drivers/net/wireless/mwl8k.c
drivers/net/wireless/rtlwifi/Kconfig
drivers/net/wireless/rtlwifi/base.c
drivers/net/wireless/rtlwifi/usb.c
drivers/net/xen-netback/common.h
drivers/net/xen-netback/interface.c
drivers/net/xen-netback/netback.c
drivers/pci/remove.c
drivers/pinctrl/Kconfig
drivers/pinctrl/Makefile
drivers/pinctrl/mvebu/pinctrl-dove.c
drivers/pinctrl/mvebu/pinctrl-kirkwood.c
drivers/pinctrl/pinctrl-exynos5440.c
drivers/pinctrl/pinctrl-mxs.c
drivers/pinctrl/pinctrl-nomadik.c
drivers/pinctrl/pinctrl-single.c
drivers/pinctrl/pinctrl-sirf.c
drivers/platform/x86/ibm_rtl.c
drivers/platform/x86/samsung-laptop.c
drivers/regulator/dbx500-prcmu.c
drivers/regulator/max77686.c
drivers/regulator/max8907-regulator.c
drivers/regulator/max8997.c
drivers/regulator/max8998.c
drivers/regulator/of_regulator.c
drivers/regulator/s2mps11.c
drivers/regulator/tps65217-regulator.c
drivers/regulator/tps65910-regulator.c
drivers/regulator/tps80031-regulator.c
drivers/rtc/rtc-isl1208.c
drivers/rtc/rtc-pl031.c
drivers/rtc/rtc-vt8500.c
drivers/scsi/isci/init.c
drivers/ssb/driver_gpio.c
drivers/ssb/main.c
drivers/ssb/ssb_private.h
drivers/staging/iio/trigger/Kconfig
drivers/staging/omapdrm/Kconfig
drivers/target/target_core_device.c
drivers/target/target_core_fabric_configfs.c
drivers/target/target_core_sbc.c
drivers/target/target_core_spc.c
drivers/usb/core/hcd.c
drivers/usb/core/hub.c
drivers/usb/host/ehci-hcd.c
drivers/usb/host/ehci-hub.c
drivers/usb/host/ehci-q.c
drivers/usb/host/ehci-sched.c
drivers/usb/host/ehci-timer.c
drivers/usb/host/pci-quirks.c
drivers/usb/host/uhci-hub.c
drivers/usb/host/xhci-ring.c
drivers/usb/serial/cp210x.c
drivers/usb/serial/ftdi_sio.c
drivers/usb/serial/ftdi_sio_ids.h
drivers/usb/serial/option.c
drivers/usb/serial/qcserial.c
drivers/usb/storage/initializers.c
drivers/usb/storage/initializers.h
drivers/usb/storage/unusual_devs.h
drivers/usb/storage/usb.c
drivers/usb/storage/usual-tables.c
drivers/vhost/net.c
drivers/vhost/tcm_vhost.c
drivers/vhost/vhost.c
drivers/vhost/vhost.h
drivers/video/imxfb.c
drivers/video/omap2/dss/dss_features.c
drivers/xen/events.c
drivers/xen/pcpu.c
drivers/xen/xen-pciback/pciback_ops.c
fs/btrfs/extent-tree.c
fs/btrfs/extent_map.c
fs/btrfs/extent_map.h
fs/btrfs/file-item.c
fs/btrfs/file.c
fs/btrfs/free-space-cache.c
fs/btrfs/inode.c
fs/btrfs/ioctl.c
fs/btrfs/ordered-data.c
fs/btrfs/qgroup.c
fs/btrfs/scrub.c
fs/btrfs/send.c
fs/btrfs/super.c
fs/btrfs/transaction.c
fs/btrfs/tree-log.c
fs/btrfs/volumes.c
fs/cifs/cifs_dfs_ref.c
fs/cifs/connect.c
fs/dlm/user.c
fs/gfs2/lock_dlm.c
fs/nfs/namespace.c
fs/nfs/nfs4client.c
fs/nfs/nfs4state.c
fs/nfs/super.c
fs/nilfs2/ioctl.c
fs/xfs/xfs_aops.c
fs/xfs/xfs_bmap.c
fs/xfs/xfs_buf.c
fs/xfs/xfs_buf_item.c
fs/xfs/xfs_dfrag.c
fs/xfs/xfs_iomap.c
fs/xfs/xfs_mount.c
fs/xfs/xfs_trace.h
include/linux/efi.h
include/linux/irq_work.h
include/linux/llist.h
include/linux/memcontrol.h
include/linux/mfd/abx500.h
include/linux/mfd/abx500/ab8500-bm.h
include/linux/mfd/da9052/da9052.h
include/linux/mfd/da9052/reg.h
include/linux/mfd/rtsx_common.h
include/linux/mfd/rtsx_pci.h
include/linux/mmu_notifier.h
include/linux/platform_data/imx-iram.h [new file with mode: 0644]
include/linux/printk.h
include/linux/rcupdate.h
include/linux/security.h
include/linux/srcu.h
include/linux/tick.h
include/linux/usb.h
include/linux/usb/hcd.h
include/linux/usb/usbnet.h
include/net/ip.h
include/net/netfilter/nf_conntrack_core.h
include/net/transp_v6.h
include/trace/events/rcu.h
include/uapi/linux/auto_fs.h
include/uapi/linux/usb/ch9.h
init/Kconfig
init/main.c
kernel/context_tracking.c
kernel/events/core.c
kernel/irq/manage.c
kernel/irq/spurious.c
kernel/irq_work.c
kernel/pid.c
kernel/printk.c
kernel/rcu.h
kernel/rcupdate.c
kernel/rcutiny.c
kernel/rcutiny_plugin.h
kernel/rcutorture.c
kernel/rcutree.c
kernel/rcutree.h
kernel/rcutree_plugin.h
kernel/sched/debug.c
kernel/sched/fair.c
kernel/sched/rt.c
kernel/smp.c
kernel/srcu.c
kernel/time/tick-sched.c
kernel/timer.c
kernel/trace/trace_clock.c
lib/Kconfig.debug
lib/digsig.c
mm/huge_memory.c
mm/hugetlb.c
mm/memcontrol.c
mm/migrate.c
mm/mlock.c
mm/mmap.c
mm/page_alloc.c
net/batman-adv/distributed-arp-table.c
net/bluetooth/hci_conn.c
net/bluetooth/hci_core.c
net/bluetooth/hci_event.c
net/bluetooth/hidp/core.c
net/bluetooth/l2cap_core.c
net/bluetooth/sco.c
net/bluetooth/smp.c
net/bridge/br_stp_bpdu.c
net/core/datagram.c
net/core/pktgen.c
net/core/request_sock.c
net/core/scm.c
net/core/skbuff.c
net/ipv4/ah4.c
net/ipv4/arp.c
net/ipv4/datagram.c
net/ipv4/esp4.c
net/ipv4/ip_gre.c
net/ipv4/ipcomp.c
net/ipv4/ping.c
net/ipv4/raw.c
net/ipv4/route.c
net/ipv4/tcp_cong.c
net/ipv4/tcp_input.c
net/ipv4/tcp_ipv4.c
net/ipv4/udp.c
net/ipv6/addrconf.c
net/ipv6/ah6.c
net/ipv6/datagram.c
net/ipv6/esp6.c
net/ipv6/icmp.c
net/ipv6/ip6_flowlabel.c
net/ipv6/ip6_gre.c
net/ipv6/ip6_output.c
net/ipv6/ip6mr.c
net/ipv6/ipv6_sockglue.c
net/ipv6/netfilter/ip6t_NPT.c
net/ipv6/raw.c
net/ipv6/route.c
net/ipv6/tcp_ipv6.c
net/ipv6/udp.c
net/l2tp/l2tp_core.c
net/l2tp/l2tp_core.h
net/l2tp/l2tp_ip6.c
net/l2tp/l2tp_ppp.c
net/mac80211/cfg.c
net/mac80211/ieee80211_i.h
net/mac80211/mesh_hwmp.c
net/mac80211/mlme.c
net/mac80211/offchannel.c
net/mac80211/scan.c
net/mac80211/tx.c
net/netfilter/ipvs/ip_vs_proto_sctp.c
net/netfilter/ipvs/ip_vs_sync.c
net/netfilter/nf_conntrack_core.c
net/netfilter/nf_conntrack_standalone.c
net/netfilter/x_tables.c
net/netfilter/xt_CT.c
net/openvswitch/vport-netdev.c
net/packet/af_packet.c
net/sched/sch_htb.c
net/sched/sch_netem.c
net/sctp/Kconfig
net/sctp/auth.c
net/sctp/endpointola.c
net/sctp/ipv6.c
net/sctp/outqueue.c
net/sctp/sm_statefuns.c
net/sctp/socket.c
net/sctp/sysctl.c
net/sunrpc/sched.c
net/sunrpc/svcsock.c
net/wireless/scan.c
net/xfrm/xfrm_policy.c
net/xfrm/xfrm_replay.c
samples/seccomp/Makefile
scripts/checkpatch.pl
security/capability.c
security/security.c
security/selinux/hooks.c
security/selinux/include/classmap.h
security/selinux/include/objsec.h
sound/pci/hda/hda_intel.c
sound/pci/hda/patch_realtek.c
sound/soc/codecs/arizona.c
sound/soc/codecs/wm2200.c
sound/soc/codecs/wm5102.c
sound/soc/codecs/wm5110.c
sound/soc/codecs/wm_adsp.c
sound/soc/fsl/imx-pcm-dma.c
sound/soc/fsl/imx-pcm-fiq.c
sound/soc/fsl/imx-pcm.c
sound/soc/fsl/imx-pcm.h
sound/soc/soc-dapm.c
sound/usb/mixer.c
tools/vm/.gitignore [new file with mode: 0644]

index 27f2b21a9d5cd5e040da0ab0e9cb9abbb69296a6..d9ca5be9b471d18d7c2640625d4845f9da8ff23a 100644 (file)
@@ -253,6 +253,8 @@ This performs an atomic exchange operation on the atomic variable v, setting
 the given new value.  It returns the old value that the atomic variable v had
 just before the operation.
 
+atomic_xchg requires explicit memory barriers around the operation.
+
        int atomic_cmpxchg(atomic_t *v, int old, int new);
 
 This performs an atomic compare exchange operation on the atomic value v,
index 728c38c242d631b88117958360c6f8441a72be4b..56fb62b09fc59ad757fc81de6ad6e478b3b0184b 100644 (file)
@@ -141,3 +141,4 @@ Version History
 1.2.0  Handle creation of arrays that contain failed devices.
 1.3.0  Added support for RAID 10
 1.3.1  Allow device replacement/rebuild for RAID 10
+1.3.2   Fix/improve redundancy checking for RAID10
index 3a268127b0547e08f167635d2b14a4a04e9a3ac8..bc50899e0c81f8afcd7888f5200bcb7ef5dc32d2 100644 (file)
@@ -81,7 +81,8 @@ PA31  TXD4
 Required properties for pin configuration node:
 - atmel,pins: 4 integers array, represents a group of pins mux and config
   setting. The format is atmel,pins = <PIN_BANK PIN_BANK_NUM PERIPH CONFIG>.
-  The PERIPH 0 means gpio.
+  The PERIPH 0 means gpio, PERIPH 1 is periph A, PERIPH 2 is periph B...
+  PIN_BANK 0 is pioA, PIN_BANK 1 is pioB...
 
 Bits used for CONFIG:
 PULL_UP                (1 << 0): indicate this pin need a pull up.
@@ -126,7 +127,7 @@ pinctrl@fffff400 {
                pinctrl_dbgu: dbgu-0 {
                        atmel,pins =
                                <1 14 0x1 0x0   /* PB14 periph A */
-                                1 15 0x1 0x1>; /* PB15 periph with pullup */
+                                1 15 0x1 0x1>; /* PB15 periph with pullup */
                };
        };
 };
old mode 100755 (executable)
new mode 100644 (file)
index 363e348bff9b93598587710de952a22c89f12bbe..6c723811c0a09f3ad5b2b18fa32ef12aa55cd82a 100644 (file)
@@ -2438,7 +2438,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
                        real-time workloads.  It can also improve energy
                        efficiency for asymmetric multiprocessors.
 
-       rcu_nocbs_poll  [KNL,BOOT]
+       rcu_nocb_poll   [KNL,BOOT]
                        Rather than requiring that offloaded CPUs
                        (specified by rcu_nocbs= above) explicitly
                        awaken the corresponding "rcuoN" kthreads,
index 3c4e1b3b80a1f8036a8b220ddcd0210d167c62b6..fa5d8a9ae2051184ddba6ce3d1dd769414d2e59f 100644 (file)
@@ -1685,6 +1685,7 @@ explicit lock operations, described later).  These include:
 
        xchg();
        cmpxchg();
+       atomic_xchg();
        atomic_cmpxchg();
        atomic_inc_return();
        atomic_dec_return();
index 406d82d5d2bb1e08a8cb9e4c548ce937f448b376..b443f1de0e5af37987b4be6282d57e09e285d42e 100644 (file)
@@ -57,6 +57,10 @@ Protocol 2.10:       (Kernel 2.6.31) Added a protocol for relaxed alignment
 Protocol 2.11: (Kernel 3.6) Added a field for offset of EFI handover
                protocol entry point.
 
+Protocol 2.12: (Kernel 3.8) Added the xloadflags field and extension fields
+               to struct boot_params for for loading bzImage and ramdisk
+               above 4G in 64bit.
+
 **** MEMORY LAYOUT
 
 The traditional memory map for the kernel loader, used for Image or
@@ -182,7 +186,7 @@ Offset      Proto   Name            Meaning
 0230/4 2.05+   kernel_alignment Physical addr alignment required for kernel
 0234/1 2.05+   relocatable_kernel Whether kernel is relocatable or not
 0235/1 2.10+   min_alignment   Minimum alignment, as a power of two
-0236/2 N/A     pad3            Unused
+0236/2 2.12+   xloadflags      Boot protocol option flags
 0238/4 2.06+   cmdline_size    Maximum size of the kernel command line
 023C/4 2.07+   hardware_subarch Hardware subarchitecture
 0240/8 2.07+   hardware_subarch_data Subarchitecture-specific data
@@ -386,6 +390,7 @@ Protocol:   2.00+
        F  Special              (0xFF = undefined)
        10  Reserved
        11  Minimal Linux Bootloader <http://sebastian-plotz.blogspot.de>
+       12  OVMF UEFI virtualization stack
 
   Please contact <hpa@zytor.com> if you need a bootloader ID
   value assigned.
@@ -582,6 +587,27 @@ Protocol:  2.10+
   misaligned kernel.  Therefore, a loader should typically try each
   power-of-two alignment from kernel_alignment down to this alignment.
 
+Field name:     xloadflags
+Type:           read
+Offset/size:    0x236/2
+Protocol:       2.12+
+
+  This field is a bitmask.
+
+  Bit 0 (read):        XLF_KERNEL_64
+       - If 1, this kernel has the legacy 64-bit entry point at 0x200.
+
+  Bit 1 (read): XLF_CAN_BE_LOADED_ABOVE_4G
+        - If 1, kernel/boot_params/cmdline/ramdisk can be above 4G.
+
+  Bit 2 (read):        XLF_EFI_HANDOVER_32
+       - If 1, the kernel supports the 32-bit EFI handoff entry point
+          given at handover_offset.
+
+  Bit 3 (read): XLF_EFI_HANDOVER_64
+       - If 1, the kernel supports the 64-bit EFI handoff entry point
+          given at handover_offset + 0x200.
+
 Field name:    cmdline_size
 Type:          read
 Offset/size:   0x238/4
index cf5437deda81a003864f9e8a5f4e533d276a189d..199f453cb4de10016030c2dd230fb9a3a3125cee 100644 (file)
@@ -19,6 +19,9 @@ Offset        Proto   Name            Meaning
 090/010        ALL     hd1_info        hd1 disk parameter, OBSOLETE!!
 0A0/010        ALL     sys_desc_table  System description table (struct sys_desc_table)
 0B0/010        ALL     olpc_ofw_header OLPC's OpenFirmware CIF and friends
+0C0/004        ALL     ext_ramdisk_image ramdisk_image high 32bits
+0C4/004        ALL     ext_ramdisk_size  ramdisk_size high 32bits
+0C8/004        ALL     ext_cmd_line_ptr  cmd_line_ptr high 32bits
 140/080        ALL     edid_info       Video mode setup (struct edid_info)
 1C0/020        ALL     efi_info        EFI 32 information (struct efi_info)
 1E0/004        ALL     alk_mem_k       Alternative mem check, in KB
@@ -27,6 +30,7 @@ Offset        Proto   Name            Meaning
 1E9/001        ALL     eddbuf_entries  Number of entries in eddbuf (below)
 1EA/001        ALL     edd_mbr_sig_buf_entries Number of entries in edd_mbr_sig_buffer
                                (below)
+1EF/001        ALL     sentinel        Used to detect broken bootloaders
 290/040        ALL     edd_mbr_sig_buffer EDD MBR signatures
 2D0/A00        ALL     e820_map        E820 memory map table
                                (array of struct e820entry)
index 8ae709e34523c4eb25c7cde1e4e4a9afb7e9704d..3b955649c325609c92ca57dff6120022ce0fbaef 100644 (file)
@@ -1303,7 +1303,7 @@ F:        include/linux/dmaengine.h
 F:     include/linux/async_tx.h
 
 AT24 EEPROM DRIVER
-M:     Wolfram Sang <w.sang@pengutronix.de>
+M:     Wolfram Sang <wsa@the-dreams.de>
 L:     linux-i2c@vger.kernel.org
 S:     Maintained
 F:     drivers/misc/eeprom/at24.c
@@ -1489,7 +1489,7 @@ AVR32 ARCHITECTURE
 M:     Haavard Skinnemoen <hskinnemoen@gmail.com>
 M:     Hans-Christian Egtvedt <egtvedt@samfundet.no>
 W:     http://www.atmel.com/products/AVR32/
-W:     http://avr32linux.org/
+W:     http://mirror.egtvedt.no/avr32linux.org/
 W:     http://avrfreaks.net/
 S:     Maintained
 F:     arch/avr32/
@@ -2966,7 +2966,7 @@ S:        Maintained
 F:     drivers/net/ethernet/i825xx/eexpress.*
 
 ETHERNET BRIDGE
-M:     Stephen Hemminger <shemminger@vyatta.com>
+M:     Stephen Hemminger <stephen@networkplumber.org>
 L:     bridge@lists.linux-foundation.org
 L:     netdev@vger.kernel.org
 W:     http://www.linuxfoundation.org/en/Net:Bridge
@@ -3757,12 +3757,11 @@ S:      Maintained
 F:     drivers/i2c/i2c-stub.c
 
 I2C SUBSYSTEM
-M:     Wolfram Sang <w.sang@pengutronix.de>
+M:     Wolfram Sang <wsa@the-dreams.de>
 M:     "Ben Dooks (embedded platforms)" <ben-linux@fluff.org>
 L:     linux-i2c@vger.kernel.org
 W:     http://i2c.wiki.kernel.org/
-T:     quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-i2c/
-T:     git git://git.pengutronix.de/git/wsa/linux.git
+T:     git git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git
 S:     Maintained
 F:     Documentation/i2c/
 F:     drivers/i2c/
@@ -4905,7 +4904,7 @@ S:        Maintained
 
 MARVELL GIGABIT ETHERNET DRIVERS (skge/sky2)
 M:     Mirko Lindner <mlindner@marvell.com>
-M:     Stephen Hemminger <shemminger@vyatta.com>
+M:     Stephen Hemminger <stephen@networkplumber.org>
 L:     netdev@vger.kernel.org
 S:     Maintained
 F:     drivers/net/ethernet/marvell/sk*
@@ -5180,7 +5179,7 @@ S:        Supported
 F:     drivers/infiniband/hw/nes/
 
 NETEM NETWORK EMULATOR
-M:     Stephen Hemminger <shemminger@vyatta.com>
+M:     Stephen Hemminger <stephen@networkplumber.org>
 L:     netem@lists.linux-foundation.org
 S:     Maintained
 F:     net/sched/sch_netem.c
@@ -5778,15 +5777,6 @@ L:       linux-i2c@vger.kernel.org
 S:     Maintained
 F:     drivers/i2c/muxes/i2c-mux-pca9541.c
 
-PCA9564/PCA9665 I2C BUS DRIVER
-M:     Wolfram Sang <w.sang@pengutronix.de>
-L:     linux-i2c@vger.kernel.org
-S:     Maintained
-F:     drivers/i2c/algos/i2c-algo-pca.c
-F:     drivers/i2c/busses/i2c-pca-*
-F:     include/linux/i2c-algo-pca.h
-F:     include/linux/i2c-pca-platform.h
-
 PCDP - PRIMARY CONSOLE AND DEBUG PORT
 M:     Khalid Aziz <khalid@gonehiking.org>
 S:     Maintained
@@ -7088,7 +7078,7 @@ F:        include/uapi/sound/
 F:     sound/
 
 SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT (ASoC)
-M:     Liam Girdwood <lrg@ti.com>
+M:     Liam Girdwood <lgirdwood@gmail.com>
 M:     Mark Brown <broonie@opensource.wolfsonmicro.com>
 T:     git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
 L:     alsa-devel@alsa-project.org (moderated for non-subscribers)
index 2cd4c6be44f2b59044d1527ec21b5d100b3dcd4a..d69266c406919bbb7c626ad71dee826088543bc5 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -1,8 +1,8 @@
 VERSION = 3
 PATCHLEVEL = 8
 SUBLEVEL = 0
-EXTRAVERSION = -rc4
-NAME = Terrified Chipmunk
+EXTRAVERSION =
+NAME = Unicycling Gorilla
 
 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"
index 9d5904cc7712fbdd64ce3d682617d5f31be6b268..9b504af2e9667168a0ed47143bcaac4c2517745f 100644 (file)
@@ -5,7 +5,6 @@ config ALPHA
        select HAVE_IDE
        select HAVE_OPROFILE
        select HAVE_SYSCALL_WRAPPERS
-       select HAVE_IRQ_WORK
        select HAVE_PCSPKR_PLATFORM
        select HAVE_PERF_EVENTS
        select HAVE_DMA_ATTRS
index 67874b82a4edf318ae3718ae6137393140405586..9bbe760f2352dc86266ace6a8d4d4d5f08a26eda 100644 (file)
@@ -36,7 +36,6 @@ config ARM
        select HAVE_GENERIC_HARDIRQS
        select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7))
        select HAVE_IDE if PCI || ISA || PCMCIA
-       select HAVE_IRQ_WORK
        select HAVE_KERNEL_GZIP
        select HAVE_KERNEL_LZMA
        select HAVE_KERNEL_LZO
index 00044026ef1f470bd6bc6eb85b3409d2c0bf6556..9b82facb2561cfdb1cbc9cda25f5021668752e4a 100644 (file)
@@ -26,7 +26,7 @@
 
        memory {
                device_type = "memory";
-               reg = <0x00000000 0x20000000>; /* 512 MB */
+               reg = <0x00000000 0x40000000>; /* 1 GB */
        };
 
        soc {
index 271855a6e224758800f1146f02dd992786dab801..e041f42ed711b7e31fe93f2601fc153b2db6c2c0 100644 (file)
                };
 
                gpio0: gpio@d0018100 {
-                       compatible = "marvell,armadaxp-gpio";
-                       reg = <0xd0018100 0x40>,
-                           <0xd0018800 0x30>;
+                       compatible = "marvell,orion-gpio";
+                       reg = <0xd0018100 0x40>;
                        ngpios = <32>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        interrupt-controller;
                        #interrupts-cells = <2>;
-                       interrupts = <16>, <17>, <18>, <19>;
+                       interrupts = <82>, <83>, <84>, <85>;
                };
 
                gpio1: gpio@d0018140 {
-                       compatible = "marvell,armadaxp-gpio";
-                       reg = <0xd0018140 0x40>,
-                           <0xd0018840 0x30>;
+                       compatible = "marvell,orion-gpio";
+                       reg = <0xd0018140 0x40>;
                        ngpios = <17>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        interrupt-controller;
                        #interrupts-cells = <2>;
-                       interrupts = <20>, <21>, <22>;
+                       interrupts = <87>, <88>, <89>;
                };
        };
 };
index 1c1937dbce73c1d320f9689fd62fe9a05c851fd2..9e23bd8c9536d9b3d02c14a275efad5111d03f4a 100644 (file)
                };
 
                gpio0: gpio@d0018100 {
-                       compatible = "marvell,armadaxp-gpio";
-                       reg = <0xd0018100 0x40>,
-                           <0xd0018800 0x30>;
+                       compatible = "marvell,orion-gpio";
+                       reg = <0xd0018100 0x40>;
                        ngpios = <32>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        interrupt-controller;
                        #interrupts-cells = <2>;
-                       interrupts = <16>, <17>, <18>, <19>;
+                       interrupts = <82>, <83>, <84>, <85>;
                };
 
                gpio1: gpio@d0018140 {
-                       compatible = "marvell,armadaxp-gpio";
-                       reg = <0xd0018140 0x40>,
-                           <0xd0018840 0x30>;
+                       compatible = "marvell,orion-gpio";
+                       reg = <0xd0018140 0x40>;
                        ngpios = <32>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        interrupt-controller;
                        #interrupts-cells = <2>;
-                       interrupts = <20>, <21>, <22>, <23>;
+                       interrupts = <87>, <88>, <89>, <90>;
                };
 
                gpio2: gpio@d0018180 {
-                       compatible = "marvell,armadaxp-gpio";
-                       reg = <0xd0018180 0x40>,
-                           <0xd0018870 0x30>;
+                       compatible = "marvell,orion-gpio";
+                       reg = <0xd0018180 0x40>;
                        ngpios = <3>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        interrupt-controller;
                        #interrupts-cells = <2>;
-                       interrupts = <24>;
+                       interrupts = <91>;
                };
 
                ethernet@d0034000 {
index 4905cf3a5ef85edc82dee68e0fafe978bd919f5c..965966110e3850a46eb247ca115c28ef827aa984 100644 (file)
                };
 
                gpio0: gpio@d0018100 {
-                       compatible = "marvell,armadaxp-gpio";
-                       reg = <0xd0018100 0x40>,
-                           <0xd0018800 0x30>;
+                       compatible = "marvell,orion-gpio";
+                       reg = <0xd0018100 0x40>;
                        ngpios = <32>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        interrupt-controller;
                        #interrupts-cells = <2>;
-                       interrupts = <16>, <17>, <18>, <19>;
+                       interrupts = <82>, <83>, <84>, <85>;
                };
 
                gpio1: gpio@d0018140 {
-                       compatible = "marvell,armadaxp-gpio";
-                       reg = <0xd0018140 0x40>,
-                           <0xd0018840 0x30>;
+                       compatible = "marvell,orion-gpio";
+                       reg = <0xd0018140 0x40>;
                        ngpios = <32>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        interrupt-controller;
                        #interrupts-cells = <2>;
-                       interrupts = <20>, <21>, <22>, <23>;
+                       interrupts = <87>, <88>, <89>, <90>;
                };
 
                gpio2: gpio@d0018180 {
-                       compatible = "marvell,armadaxp-gpio";
-                       reg = <0xd0018180 0x40>,
-                           <0xd0018870 0x30>;
+                       compatible = "marvell,orion-gpio";
+                       reg = <0xd0018180 0x40>;
                        ngpios = <3>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        interrupt-controller;
                        #interrupts-cells = <2>;
-                       interrupts = <24>;
+                       interrupts = <91>;
                };
 
                ethernet@d0034000 {
index e154f242c680e0ca3db90aabf823490dcb146607..222047f1ece9bfac7ed0562540bfaff483dc89e3 100644 (file)
 
        i2c@0 {
                compatible = "i2c-gpio";
-               gpios = <&pioA 23 0 /* sda */
-                        &pioA 24 0 /* scl */
+               gpios = <&pioA 25 0 /* sda */
+                        &pioA 26 0 /* scl */
                        >;
                i2c-gpio,sda-open-drain;
                i2c-gpio,scl-open-drain;
index 3a47cf952146075165564ee38b8b7e14d8baec53..8ecca6948d811f827e623e48f039238dad9fe6bf 100644 (file)
                                                atmel,pins =
                                                        <0 3 0x1 0x0>;  /* PA3 periph A */
                                        };
+
+                                       pinctrl_usart0_sck: usart0_sck-0 {
+                                               atmel,pins =
+                                                       <0 4 0x1 0x0>;  /* PA4 periph A */
+                                       };
                                };
 
                                usart1 {
 
                                        pinctrl_usart1_rts: usart1_rts-0 {
                                                atmel,pins =
-                                                       <3 27 0x3 0x0>; /* PC27 periph C */
+                                                       <2 27 0x3 0x0>; /* PC27 periph C */
                                        };
 
                                        pinctrl_usart1_cts: usart1_cts-0 {
                                                atmel,pins =
-                                                       <3 28 0x3 0x0>; /* PC28 periph C */
+                                                       <2 28 0x3 0x0>; /* PC28 periph C */
+                                       };
+
+                                       pinctrl_usart1_sck: usart1_sck-0 {
+                                               atmel,pins =
+                                                       <2 28 0x3 0x0>; /* PC29 periph C */
                                        };
                                };
 
 
                                        pinctrl_uart2_rts: uart2_rts-0 {
                                                atmel,pins =
-                                                       <0 0 0x2 0x0>;  /* PB0 periph B */
+                                                       <1 0 0x2 0x0>;  /* PB0 periph B */
                                        };
 
                                        pinctrl_uart2_cts: uart2_cts-0 {
                                                atmel,pins =
-                                                       <0 1 0x2 0x0>;  /* PB1 periph B */
+                                                       <1 1 0x2 0x0>;  /* PB1 periph B */
+                                       };
+
+                                       pinctrl_usart2_sck: usart2_sck-0 {
+                                               atmel,pins =
+                                                       <1 2 0x2 0x0>;  /* PB2 periph B */
                                        };
                                };
 
                                usart3 {
                                        pinctrl_uart3: usart3-0 {
                                                atmel,pins =
-                                                       <3 23 0x2 0x1   /* PC22 periph B with pullup */
-                                                        3 23 0x2 0x0>; /* PC23 periph B */
+                                                       <2 23 0x2 0x1   /* PC22 periph B with pullup */
+                                                        2 23 0x2 0x0>; /* PC23 periph B */
                                        };
 
                                        pinctrl_usart3_rts: usart3_rts-0 {
                                                atmel,pins =
-                                                       <3 24 0x2 0x0>; /* PC24 periph B */
+                                                       <2 24 0x2 0x0>; /* PC24 periph B */
                                        };
 
                                        pinctrl_usart3_cts: usart3_cts-0 {
                                                atmel,pins =
-                                                       <3 25 0x2 0x0>; /* PC25 periph B */
+                                                       <2 25 0x2 0x0>; /* PC25 periph B */
+                                       };
+
+                                       pinctrl_usart3_sck: usart3_sck-0 {
+                                               atmel,pins =
+                                                       <2 26 0x2 0x0>; /* PC26 periph B */
                                        };
                                };
 
                                uart0 {
                                        pinctrl_uart0: uart0-0 {
                                                atmel,pins =
-                                                       <3 8 0x3 0x0    /* PC8 periph C */
-                                                        3 9 0x3 0x1>;  /* PC9 periph C with pullup */
+                                                       <2 8 0x3 0x0    /* PC8 periph C */
+                                                        2 9 0x3 0x1>;  /* PC9 periph C with pullup */
                                        };
                                };
 
                                uart1 {
                                        pinctrl_uart1: uart1-0 {
                                                atmel,pins =
-                                                       <3 16 0x3 0x0   /* PC16 periph C */
-                                                        3 17 0x3 0x1>; /* PC17 periph C with pullup */
+                                                       <2 16 0x3 0x0   /* PC16 periph C */
+                                                        2 17 0x3 0x1>; /* PC17 periph C with pullup */
                                        };
                                };
 
 
                                        pinctrl_macb0_rmii_mii: macb0_rmii_mii-0 {
                                                atmel,pins =
-                                                       <1 8 0x1 0x0    /* PA8 periph A */
-                                                        1 11 0x1 0x0   /* PA11 periph A */
-                                                        1 12 0x1 0x0   /* PA12 periph A */
-                                                        1 13 0x1 0x0   /* PA13 periph A */
-                                                        1 14 0x1 0x0   /* PA14 periph A */
-                                                        1 15 0x1 0x0   /* PA15 periph A */
-                                                        1 16 0x1 0x0   /* PA16 periph A */
-                                                        1 17 0x1 0x0>; /* PA17 periph A */
+                                                       <1 8 0x1 0x0    /* PB8 periph A */
+                                                        1 11 0x1 0x0   /* PB11 periph A */
+                                                        1 12 0x1 0x0   /* PB12 periph A */
+                                                        1 13 0x1 0x0   /* PB13 periph A */
+                                                        1 14 0x1 0x0   /* PB14 periph A */
+                                                        1 15 0x1 0x0   /* PB15 periph A */
+                                                        1 16 0x1 0x0   /* PB16 periph A */
+                                                        1 17 0x1 0x0>; /* PB17 periph A */
                                        };
                                };
 
index fddd1741743320fbdd29afbdb75133ae46673fa1..46c09801703655eb0a8fb28b8332cafa674f9b72 100644 (file)
@@ -96,8 +96,8 @@
                fifo-depth = <0x80>;
                card-detect-delay = <200>;
                samsung,dw-mshc-ciu-div = <3>;
-               samsung,dw-mshc-sdr-timing = <2 3 3>;
-               samsung,dw-mshc-ddr-timing = <1 2 3>;
+               samsung,dw-mshc-sdr-timing = <2 3>;
+               samsung,dw-mshc-ddr-timing = <1 2>;
 
                slot@0 {
                        reg = <0>;
                fifo-depth = <0x80>;
                card-detect-delay = <200>;
                samsung,dw-mshc-ciu-div = <3>;
-               samsung,dw-mshc-sdr-timing = <2 3 3>;
-               samsung,dw-mshc-ddr-timing = <1 2 3>;
+               samsung,dw-mshc-sdr-timing = <2 3>;
+               samsung,dw-mshc-ddr-timing = <1 2>;
 
                slot@0 {
                        reg = <0>;
                fifo-depth = <0x80>;
                card-detect-delay = <200>;
                samsung,dw-mshc-ciu-div = <3>;
-               samsung,dw-mshc-sdr-timing = <2 3 3>;
-               samsung,dw-mshc-ddr-timing = <1 2 3>;
+               samsung,dw-mshc-sdr-timing = <2 3>;
+               samsung,dw-mshc-ddr-timing = <1 2>;
 
                slot@0 {
                        reg = <0>;
index fed7d3f9f431071af027d72a12c92dcb6f365943..cdee96fca6e25fec9a0e24208344c03621298721 100644 (file)
 };
 
 &uart0 { status = "okay"; };
-&sdio0 { status = "okay"; };
 &sata0 { status = "okay"; };
 &i2c0 { status = "okay"; };
 
+&sdio0 {
+       status = "okay";
+       /* sdio0 card detect is connected to wrong pin on CuBox */
+       cd-gpios = <&gpio0 12 1>;
+};
+
 &spi0 {
        status = "okay";
 
 };
 
 &pinctrl {
-       pinctrl-0 = <&pmx_gpio_18>;
+       pinctrl-0 = <&pmx_gpio_12 &pmx_gpio_18>;
        pinctrl-names = "default";
 
+       pmx_gpio_12: pmx-gpio-12 {
+               marvell,pins = "mpp12";
+               marvell,function = "gpio";
+       };
+
        pmx_gpio_18: pmx-gpio-18 {
                marvell,pins = "mpp18";
                marvell,function = "gpio";
index 942d5761ca971dd7317c8398d5ddaddd0b0fce98..e05b18f3c33d67d6e5202083bf60f8aa65b4344f 100644 (file)
                fifo-depth = <0x80>;
                card-detect-delay = <200>;
                samsung,dw-mshc-ciu-div = <3>;
-               samsung,dw-mshc-sdr-timing = <2 3 3>;
-               samsung,dw-mshc-ddr-timing = <1 2 3>;
+               samsung,dw-mshc-sdr-timing = <2 3>;
+               samsung,dw-mshc-ddr-timing = <1 2>;
 
                slot@0 {
                        reg = <0>;
                fifo-depth = <0x80>;
                card-detect-delay = <200>;
                samsung,dw-mshc-ciu-div = <3>;
-               samsung,dw-mshc-sdr-timing = <2 3 3>;
-               samsung,dw-mshc-ddr-timing = <1 2 3>;
+               samsung,dw-mshc-sdr-timing = <2 3>;
+               samsung,dw-mshc-ddr-timing = <1 2>;
 
                slot@0 {
                        reg = <0>;
index 9bc6785ad228f9522c73ad0df60befa33ef798a4..77d21abfcdf73a3430f529be076cb4f17cd9e13d 100644 (file)
@@ -1,4 +1,5 @@
 /include/ "kirkwood.dtsi"
+/include/ "kirkwood-6281.dtsi"
 
 / {
        chosen {
@@ -6,6 +7,21 @@
        };
 
        ocp@f1000000 {
+               pinctrl: pinctrl@10000 {
+                       pinctrl-0 = < &pmx_spi &pmx_twsi0 &pmx_uart0
+                                       &pmx_ns2_sata0 &pmx_ns2_sata1>;
+                       pinctrl-names = "default";
+
+                       pmx_ns2_sata0: pmx-ns2-sata0 {
+                               marvell,pins = "mpp21";
+                               marvell,function = "sata0";
+                       };
+                       pmx_ns2_sata1: pmx-ns2-sata1 {
+                               marvell,pins = "mpp20";
+                               marvell,function = "sata1";
+                       };
+               };
+
                serial@12000 {
                        clock-frequency = <166666667>;
                        status = "okay";
index 110d6cbb795b384aa330c422d6409057839bb3ee..d6ab442b7011e8777efa036b551aa8e8ef438e49 100644 (file)
@@ -36,6 +36,7 @@
                        reg = <0x10100 0x40>;
                        ngpios = <32>;
                        interrupt-controller;
+                       #interrupt-cells = <2>;
                        interrupts = <35>, <36>, <37>, <38>;
                };
 
@@ -46,6 +47,7 @@
                        reg = <0x10140 0x40>;
                        ngpios = <18>;
                        interrupt-controller;
+                       #interrupt-cells = <2>;
                        interrupts = <39>, <40>, <41>;
                };
 
index e8814fe0e27760b475b0c850880e44b0923a8b50..b4dc3ed9a3ecc95949d07e79889e53a8600d66ee 100644 (file)
@@ -48,6 +48,8 @@
 
                        macb0: ethernet@fffc4000 {
                                phy-mode = "mii";
+                               pinctrl-0 = <&pinctrl_macb_rmii
+                                            &pinctrl_macb_rmii_mii_alt>;
                                status = "okay";
                        };
 
index 8bbc2bfef221a2449da1211b2b880aeb07364f94..8b36abea9f2edba7cc4390693324c829142b8a76 100644 (file)
                };
 
                uart0: uart@01c28000 {
-                       compatible = "ns8250";
+                       compatible = "snps,dw-apb-uart";
                        reg = <0x01c28000 0x400>;
                        interrupts = <1>;
                        reg-shift = <2>;
+                       reg-io-width = <4>;
                        clock-frequency = <24000000>;
                        status = "disabled";
                };
 
                uart1: uart@01c28400 {
-                       compatible = "ns8250";
+                       compatible = "snps,dw-apb-uart";
                        reg = <0x01c28400 0x400>;
                        interrupts = <2>;
                        reg-shift = <2>;
+                       reg-io-width = <4>;
                        clock-frequency = <24000000>;
                        status = "disabled";
                };
index 1fc405a9ecfb0a4e6cacd94ba9442d6ce75575fa..cf8071ad22d5fb5acfd1382f82d16e606c28e068 100644 (file)
@@ -45,7 +45,6 @@
                        reg = <1>;
                };
 
-/* A7s disabled till big.LITTLE patches are available...
                cpu2: cpu@2 {
                        device_type = "cpu";
                        compatible = "arm,cortex-a7";
@@ -63,7 +62,6 @@
                        compatible = "arm,cortex-a7";
                        reg = <0x102>;
                };
-*/
        };
 
        memory@80000000 {
index 36ae03a3f5d1a07527145ff545ded90888ba0a7b..87dfa9026c5bdcb1ba9d57d718d00da671c8fe21 100644 (file)
@@ -351,6 +351,25 @@ void __init gic_cascade_irq(unsigned int gic_nr, unsigned int irq)
        irq_set_chained_handler(irq, gic_handle_cascade_irq);
 }
 
+static u8 gic_get_cpumask(struct gic_chip_data *gic)
+{
+       void __iomem *base = gic_data_dist_base(gic);
+       u32 mask, i;
+
+       for (i = mask = 0; i < 32; i += 4) {
+               mask = readl_relaxed(base + GIC_DIST_TARGET + i);
+               mask |= mask >> 16;
+               mask |= mask >> 8;
+               if (mask)
+                       break;
+       }
+
+       if (!mask)
+               pr_crit("GIC CPU mask not found - kernel will fail to boot.\n");
+
+       return mask;
+}
+
 static void __init gic_dist_init(struct gic_chip_data *gic)
 {
        unsigned int i;
@@ -369,7 +388,9 @@ static void __init gic_dist_init(struct gic_chip_data *gic)
        /*
         * Set all global interrupts to this CPU only.
         */
-       cpumask = readl_relaxed(base + GIC_DIST_TARGET + 0);
+       cpumask = gic_get_cpumask(gic);
+       cpumask |= cpumask << 8;
+       cpumask |= cpumask << 16;
        for (i = 32; i < gic_irqs; i += 4)
                writel_relaxed(cpumask, base + GIC_DIST_TARGET + i * 4 / 4);
 
@@ -400,7 +421,7 @@ static void __cpuinit gic_cpu_init(struct gic_chip_data *gic)
         * Get what the GIC says our CPU mask is.
         */
        BUG_ON(cpu >= NR_GIC_CPU_IF);
-       cpu_mask = readl_relaxed(dist_base + GIC_DIST_TARGET + 0);
+       cpu_mask = gic_get_cpumask(gic);
        gic_cpu_map[cpu] = cpu_mask;
 
        /*
index b175577d7abb5aec9541461e35407f0f9059c04a..1ea959019fcd3c19295b8a27a458198100344fe6 100644 (file)
@@ -19,6 +19,7 @@ CONFIG_SOC_AT91SAM9260=y
 CONFIG_SOC_AT91SAM9263=y
 CONFIG_SOC_AT91SAM9G45=y
 CONFIG_SOC_AT91SAM9X5=y
+CONFIG_SOC_AT91SAM9N12=y
 CONFIG_MACH_AT91SAM_DT=y
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
 CONFIG_AT91_TIMER_HZ=128
@@ -31,7 +32,7 @@ CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
-CONFIG_CMDLINE="mem=128M console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw"
+CONFIG_CMDLINE="console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw"
 CONFIG_KEXEC=y
 CONFIG_AUTO_ZRELADDR=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
index 73cf03aa981e1b665d9a40f4f80847335ca49441..1c4df27f93322604398d70f9c585332e97374b10 100644 (file)
@@ -37,7 +37,7 @@
  */
 #define PAGE_OFFSET            UL(CONFIG_PAGE_OFFSET)
 #define TASK_SIZE              (UL(CONFIG_PAGE_OFFSET) - UL(0x01000000))
-#define TASK_UNMAPPED_BASE     (UL(CONFIG_PAGE_OFFSET) / 3)
+#define TASK_UNMAPPED_BASE     ALIGN(TASK_SIZE / 3, SZ_16M)
 
 /*
  * The maximum size of a 26-bit user space task.
index 4eb6d005ffaa4b625c9f86fc8532b046d0cf1f6a..86dff32a073755f46c40c379d27a29f9aab5b829 100644 (file)
@@ -7,8 +7,14 @@
 
 #ifndef __ASSEMBLER__
 unsigned int scu_get_core_count(void __iomem *);
-void scu_enable(void __iomem *);
 int scu_power_mode(void __iomem *, unsigned int);
+
+#ifdef CONFIG_SMP
+void scu_enable(void __iomem *scu_base);
+#else
+static inline void scu_enable(void __iomem *scu_base) {}
+#endif
+
 #endif
 
 #endif
index 6809200c31fb73349df3af95cd737c0e70293ada..14f7c3b14632e22c02632faeaca9f07adcbc232f 100644 (file)
@@ -100,12 +100,14 @@ ENTRY(printch)
                b       1b
 ENDPROC(printch)
 
+#ifdef CONFIG_MMU
 ENTRY(debug_ll_addr)
                addruart r2, r3, ip
                str     r2, [r0]
                str     r3, [r1]
                mov     pc, lr
 ENDPROC(debug_ll_addr)
+#endif
 
 #else
 
index 4eee351f4668e2bbee54c3771a5389ce8900c10c..486a15ae901192fa3e26539b3d2b7003a1528e0f 100644 (file)
@@ -246,6 +246,7 @@ __create_page_tables:
 
        /*
         * Then map boot params address in r2 if specified.
+        * We map 2 sections in case the ATAGs/DTB crosses a section boundary.
         */
        mov     r0, r2, lsr #SECTION_SHIFT
        movs    r0, r0, lsl #SECTION_SHIFT
@@ -253,6 +254,8 @@ __create_page_tables:
        addne   r3, r3, #PAGE_OFFSET
        addne   r3, r4, r3, lsr #(SECTION_SHIFT - PMD_ORDER)
        orrne   r6, r7, r0
+       strne   r6, [r3], #1 << PMD_ORDER
+       addne   r6, r6, #1 << SECTION_SHIFT
        strne   r6, [r3]
 
 #ifdef CONFIG_DEBUG_LL
@@ -331,7 +334,7 @@ ENTRY(secondary_startup)
         * as it has already been validated by the primary processor.
         */
 #ifdef CONFIG_ARM_VIRT_EXT
-       bl      __hyp_stub_install
+       bl      __hyp_stub_install_secondary
 #endif
        safe_svcmode_maskall r9
 
index 65b2417aebce0beed61a7510702168cad2d9c3dc..1315c4ccfa563a04928347ec560ed618dcd3f958 100644 (file)
@@ -99,7 +99,7 @@ ENTRY(__hyp_stub_install_secondary)
         * immediately.
         */
        compare_cpu_mode_with_primary   r4, r5, r6, r7
-       bxne    lr
+       movne   pc, lr
 
        /*
         * Once we have given up on one CPU, we do not try to install the
@@ -111,7 +111,7 @@ ENTRY(__hyp_stub_install_secondary)
         */
 
        cmp     r4, #HYP_MODE
-       bxne    lr                      @ give up if the CPU is not in HYP mode
+       movne   pc, lr                  @ give up if the CPU is not in HYP mode
 
 /*
  * Configure HSCTLR to set correct exception endianness/instruction set
@@ -120,7 +120,8 @@ ENTRY(__hyp_stub_install_secondary)
  * Eventually, CPU-specific code might be needed -- assume not for now
  *
  * This code relies on the "eret" instruction to synchronize the
- * various coprocessor accesses.
+ * various coprocessor accesses. This is done when we switch to SVC
+ * (see safe_svcmode_maskall).
  */
        @ Now install the hypervisor stub:
        adr     r7, __hyp_stub_vectors
@@ -155,14 +156,7 @@ THUMB(     orr     r7, #(1 << 30)  )       @ HSCTLR.TE
 1:
 #endif
 
-       bic     r7, r4, #MODE_MASK
-       orr     r7, r7, #SVC_MODE
-THUMB( orr     r7, r7, #PSR_T_BIT      )
-       msr     spsr_cxsf, r7           @ This is SPSR_hyp.
-
-       __MSR_ELR_HYP(14)               @ msr elr_hyp, lr
-       __ERET                          @ return, switching to SVC mode
-                                       @ The boot CPU mode is left in r4.
+       bx      lr                      @ The boot CPU mode is left in r4.
 ENDPROC(__hyp_stub_install_secondary)
 
 __hyp_stub_do_trap:
@@ -200,7 +194,7 @@ ENDPROC(__hyp_get_vectors)
        @ fall through
 ENTRY(__hyp_set_vectors)
        __HVC(0)
-       bx      lr
+       mov     pc, lr
 ENDPROC(__hyp_set_vectors)
 
 #ifndef ZIMAGE
index b9f015e843d8d10c461197c4399663942fb721e9..45eac87ed66a692859e7431af684f0b33b3ffeed 100644 (file)
@@ -75,7 +75,7 @@ void scu_enable(void __iomem *scu_base)
 int scu_power_mode(void __iomem *scu_base, unsigned int mode)
 {
        unsigned int val;
-       int cpu = cpu_logical_map(smp_processor_id());
+       int cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(smp_processor_id()), 0);
 
        if (mode > 3 || mode == 1 || cpu > 3)
                return -EINVAL;
index 9ee866ce0478027b72cb001ca4cfb1a80326da3f..4b678478cf95d9f60d6a4484b4a490ee46228d45 100644 (file)
@@ -105,6 +105,8 @@ static void __init soc_detect(u32 dbgu_base)
        switch (socid) {
        case ARCH_ID_AT91RM9200:
                at91_soc_initdata.type = AT91_SOC_RM9200;
+               if (at91_soc_initdata.subtype == AT91_SOC_SUBTYPE_NONE)
+                       at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA;
                at91_boot_soc = at91rm9200_soc;
                break;
 
index e103c290bc9e37ca5871d8e8182493e9fa0447c5..85afb031b6766909354b88502c379598f2b1d37a 100644 (file)
@@ -414,7 +414,7 @@ config MACH_EXYNOS4_DT
        select CPU_EXYNOS4210
        select HAVE_SAMSUNG_KEYPAD if INPUT_KEYBOARD
        select PINCTRL
-       select PINCTRL_EXYNOS4
+       select PINCTRL_EXYNOS
        select USE_OF
        help
          Machine support for Samsung Exynos4 machine with device tree enabled.
index 981dc1e1da518b1ddf5f6340085837ad07d7e444..e6c06128293962b24adbe84892e19d4a876ff373 100644 (file)
@@ -28,6 +28,7 @@
 
 #include <asm/arch_timer.h>
 #include <asm/cacheflush.h>
+#include <asm/cputype.h>
 #include <asm/smp_plat.h>
 #include <asm/smp_twd.h>
 #include <asm/hardware/arm_timer.h>
@@ -59,7 +60,7 @@ static void __init highbank_scu_map_io(void)
 
 void highbank_set_cpu_jump(int cpu, void *jump_addr)
 {
-       cpu = cpu_logical_map(cpu);
+       cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(cpu), 0);
        writel(virt_to_phys(jump_addr), HB_JUMP_TABLE_VIRT(cpu));
        __cpuc_flush_dcache_area(HB_JUMP_TABLE_VIRT(cpu), 16);
        outer_clean_range(HB_JUMP_TABLE_PHYS(cpu),
index 70af9d13fcefefb1fad252c1a8c8a2bffa71ef3b..5995df7f2622eaa20382d7ad0e90483675a6b5eb 100644 (file)
@@ -37,7 +37,7 @@ extern void __iomem *sregs_base;
 
 static inline void highbank_set_core_pwr(void)
 {
-       int cpu = cpu_logical_map(smp_processor_id());
+       int cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(smp_processor_id()), 0);
        if (scu_base_addr)
                scu_power_mode(scu_base_addr, SCU_PM_POWEROFF);
        else
@@ -46,7 +46,7 @@ static inline void highbank_set_core_pwr(void)
 
 static inline void highbank_clear_core_pwr(void)
 {
-       int cpu = cpu_logical_map(smp_processor_id());
+       int cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(smp_processor_id()), 0);
        if (scu_base_addr)
                scu_power_mode(scu_base_addr, SCU_PM_NORMAL);
        else
index 3e628fd7a674d3b5f6b4782b32ef03f7548c43a2..0a2349dc70184021e268db86ef9c3cb0e966f8a3 100644 (file)
@@ -851,6 +851,7 @@ config SOC_IMX6Q
        select HAVE_CAN_FLEXCAN if CAN
        select HAVE_IMX_GPC
        select HAVE_IMX_MMDC
+       select HAVE_IMX_SRC
        select HAVE_SMP
        select MFD_SYSCON
        select PINCTRL
index 7f2c10c7413abaf0786b45a29933bc60745bd12c..c0c4e723b7f5dee0a34526fd280cab2e8b3966b1 100644 (file)
@@ -436,6 +436,9 @@ int __init mx6q_clocks_init(void)
        for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
                clk_prepare_enable(clk[clks_init_on[i]]);
 
+       /* Set initial power mode */
+       imx6q_set_lpm(WAIT_CLOCKED);
+
        np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt");
        base = of_iomap(np, 0);
        WARN_ON(!base);
index 7191ab4434e52b5c881e170e9e7925e918ba42f5..fa36fb84ab193f2fb8480bf3cc70d68232824844 100644 (file)
@@ -142,6 +142,7 @@ extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
 extern void imx6q_clock_map_io(void);
 
 extern void imx_cpu_die(unsigned int cpu);
+extern int imx_cpu_kill(unsigned int cpu);
 
 #ifdef CONFIG_PM
 extern void imx6q_pm_init(void);
index 10b0ed39f07f9ff5cea15ca7fd5359f96506bd34..25a47c616b2d7c2b855eaf510b84b4d466b51d62 100644 (file)
@@ -54,7 +54,7 @@ struct platform_device *__init imx_add_imx_fb(
                        .flags = IORESOURCE_IRQ,
                },
        };
-       return imx_add_platform_device_dmamask("imx-fb", 0,
+       return imx_add_platform_device_dmamask(data->devid, 0,
                        res, ARRAY_SIZE(res),
                        pdata, sizeof(*pdata), DMA_BIT_MASK(32));
 }
index 3dec962b0770aa9f088829da920c76a44a9d4113..7bc5fe15dda2a3cbc5eb43bd1c93d69830c4af70 100644 (file)
@@ -46,9 +46,11 @@ static inline void cpu_enter_lowpower(void)
 void imx_cpu_die(unsigned int cpu)
 {
        cpu_enter_lowpower();
-       imx_enable_cpu(cpu, false);
+       cpu_do_idle();
+}
 
-       /* spin here until hardware takes it down */
-       while (1)
-               ;
+int imx_cpu_kill(unsigned int cpu)
+{
+       imx_enable_cpu(cpu, false);
+       return 1;
 }
diff --git a/arch/arm/mach-imx/iram.h b/arch/arm/mach-imx/iram.h
deleted file mode 100644 (file)
index 022690c..0000000
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-#include <linux/errno.h>
-
-#ifdef CONFIG_IRAM_ALLOC
-
-int __init iram_init(unsigned long base, unsigned long size);
-void __iomem *iram_alloc(unsigned int size, unsigned long *dma_addr);
-void iram_free(unsigned long dma_addr, unsigned int size);
-
-#else
-
-static inline int __init iram_init(unsigned long base, unsigned long size)
-{
-       return -ENOMEM;
-}
-
-static inline void __iomem *iram_alloc(unsigned int size, unsigned long *dma_addr)
-{
-       return NULL;
-}
-
-static inline void iram_free(unsigned long base, unsigned long size) {}
-
-#endif
index 6c80424f678e3fad821aa8ea60685485db5ddb6e..e05cf407db659c834f6c2f4d500c26242c4e2d53 100644 (file)
@@ -22,8 +22,7 @@
 #include <linux/module.h>
 #include <linux/spinlock.h>
 #include <linux/genalloc.h>
-
-#include "iram.h"
+#include "linux/platform_data/imx-iram.h"
 
 static unsigned long iram_phys_base;
 static void __iomem *iram_virt_base;
index 3777b805b76ba8645c50c41993f8ba06b550927d..66fae885c8429f3b9147d4a3c33cd6e739a0ae05 100644 (file)
@@ -92,5 +92,6 @@ struct smp_operations  imx_smp_ops __initdata = {
        .smp_boot_secondary     = imx_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
        .cpu_die                = imx_cpu_die,
+       .cpu_kill               = imx_cpu_kill,
 #endif
 };
index a17543da602da4d8c5504961434bba5bfa2551b2..ee42d20cba19f022d4a9ece8616e27b443d7e82e 100644 (file)
@@ -41,6 +41,7 @@ static int imx6q_pm_enter(suspend_state_t state)
                cpu_suspend(0, imx6q_suspend_finish);
                imx_smp_prepare();
                imx_gpc_post_resume();
+               imx6q_set_lpm(WAIT_CLOCKED);
                break;
        default:
                return -EINVAL;
index be50e795536d1aa2375df9957a057bac5d28e942..e7fcea7f33008b3e8ee5c3288475a726fd88c13d 100644 (file)
@@ -475,13 +475,12 @@ int __init pci_v3_setup(int nr, struct pci_sys_data *sys)
 {
        int ret = 0;
 
+       if (!ap_syscon_base)
+               return -EINVAL;
+
        if (nr == 0) {
                sys->mem_offset = PHYS_PCI_MEM_BASE;
                ret = pci_v3_setup_resources(sys);
-               /* Remap the Integrator system controller */
-               ap_syscon_base = ioremap(INTEGRATOR_SC_BASE, 0x100);
-               if (!ap_syscon_base)
-                       return -EINVAL;
        }
 
        return ret;
@@ -497,6 +496,13 @@ void __init pci_v3_preinit(void)
        unsigned int temp;
        int ret;
 
+       /* Remap the Integrator system controller */
+       ap_syscon_base = ioremap(INTEGRATOR_SC_BASE, 0x100);
+       if (!ap_syscon_base) {
+               pr_err("unable to remap the AP syscon for PCIv3\n");
+               return;
+       }
+
        pcibios_min_mem = 0x00100000;
 
        /*
index 8821720ab5a481ca048b0acb1ef01010055ffa7f..f4632a809f6895a0481ea1876e3e0fe25da36fe8 100644 (file)
 #include <linux/gpio.h>
 #include <linux/of.h>
 #include "common.h"
-#include "mpp.h"
 
 static struct mv643xx_eth_platform_data ns2_ge00_data = {
        .phy_addr       = MV643XX_ETH_PHY_ADDR(8),
 };
 
-static unsigned int ns2_mpp_config[] __initdata = {
-       MPP0_SPI_SCn,
-       MPP1_SPI_MOSI,
-       MPP2_SPI_SCK,
-       MPP3_SPI_MISO,
-       MPP4_NF_IO6,
-       MPP5_NF_IO7,
-       MPP6_SYSRST_OUTn,
-       MPP7_GPO,               /* Fan speed (bit 1) */
-       MPP8_TW0_SDA,
-       MPP9_TW0_SCK,
-       MPP10_UART0_TXD,
-       MPP11_UART0_RXD,
-       MPP12_GPO,              /* Red led */
-       MPP14_GPIO,             /* USB fuse */
-       MPP16_GPIO,             /* SATA 0 power */
-       MPP17_GPIO,             /* SATA 1 power */
-       MPP18_NF_IO0,
-       MPP19_NF_IO1,
-       MPP20_SATA1_ACTn,
-       MPP21_SATA0_ACTn,
-       MPP22_GPIO,             /* Fan speed (bit 0) */
-       MPP23_GPIO,             /* Fan power */
-       MPP24_GPIO,             /* USB mode select */
-       MPP25_GPIO,             /* Fan rotation fail */
-       MPP26_GPIO,             /* USB device vbus */
-       MPP28_GPIO,             /* USB enable host vbus */
-       MPP29_GPIO,             /* Blue led (slow register) */
-       MPP30_GPIO,             /* Blue led (command register) */
-       MPP31_GPIO,             /* Board power off */
-       MPP32_GPIO,             /* Power button (0 = Released, 1 = Pushed) */
-       MPP33_GPO,              /* Fan speed (bit 2) */
-       0
-};
-
 #define NS2_GPIO_POWER_OFF     31
 
 static void ns2_power_off(void)
@@ -71,8 +35,6 @@ void __init ns2_init(void)
        /*
         * Basic setup. Needs to be called early.
         */
-       kirkwood_mpp_conf(ns2_mpp_config);
-
        if (of_machine_is_compatible("lacie,netspace_lite_v2") ||
            of_machine_is_compatible("lacie,netspace_mini_v2"))
                ns2_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
index 5dcb369b58aa0c79e55159f9affbd8b0c2a105d2..99df4df680fda3b54e3dce605ea3793d3f6bd26b 100644 (file)
@@ -1,6 +1,8 @@
 ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \
        -I$(srctree)/arch/arm/plat-orion/include
 
+AFLAGS_coherency_ll.o          := -Wa,-march=armv7-a
+
 obj-y += system-controller.o
 obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o irq-armada-370-xp.o addr-map.o coherency.o coherency_ll.o pmsu.o
 obj-$(CONFIG_SMP)                += platsmp.o headsmp.o
index 5c8e9cee2c2e99a4e1562b07021edb77eb36a554..769c1feee1c469049290f9101745cc28ef01742f 100644 (file)
@@ -397,6 +397,12 @@ static struct omap_board_mux board_mux[] __initdata = {
                  OMAP_PULL_ENA),
        OMAP4_MUX(ABE_MCBSP1_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
 
+       /* UART2 - BT/FM/GPS shared transport */
+       OMAP4_MUX(UART2_CTS,    OMAP_PIN_INPUT  | OMAP_MUX_MODE0),
+       OMAP4_MUX(UART2_RTS,    OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
+       OMAP4_MUX(UART2_RX,     OMAP_PIN_INPUT  | OMAP_MUX_MODE0),
+       OMAP4_MUX(UART2_TX,     OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
+
        { .reg_offset = OMAP_MUX_TERMINATOR },
 };
 
index 7e5febe456d97b0088d7dfe455124b8153f4ff41..ab7e952d207013e42888c2a7cbfe0cd4e7b1b162 100644 (file)
@@ -1935,6 +1935,8 @@ int __init omap2420_clk_init(void)
                        omap2_init_clk_hw_omap_clocks(c->lk.clk);
        }
 
+       omap2xxx_clkt_vps_late_init();
+
        omap2_clk_disable_autoidle_all();
 
        omap2_clk_enable_init_clocks(enable_init_clks,
index eda079b96c6aac0389c6539f7d93a0b0cf539e4f..eb3dab68d5362b4b6340de4fccca2b5fd8fff825 100644 (file)
@@ -2050,6 +2050,8 @@ int __init omap2430_clk_init(void)
                        omap2_init_clk_hw_omap_clocks(c->lk.clk);
        }
 
+       omap2xxx_clkt_vps_late_init();
+
        omap2_clk_disable_autoidle_all();
 
        omap2_clk_enable_init_clocks(enable_init_clks,
index 5789a5e255638d60f797a18840b3f0b01394e50a..a2cc046b47f460a83a0954ae5249e617ea091f01 100644 (file)
@@ -2026,14 +2026,13 @@ int __init omap4xxx_clk_init(void)
         * On OMAP4460 the ABE DPLL fails to turn on if in idle low-power
         * state when turning the ABE clock domain. Workaround this by
         * locking the ABE DPLL on boot.
+        * Lock the ABE DPLL in any case to avoid issues with audio.
         */
-       if (cpu_is_omap446x()) {
-               rc = clk_set_parent(&abe_dpll_refclk_mux_ck, &sys_32k_ck);
-               if (!rc)
-                       rc = clk_set_rate(&dpll_abe_ck, OMAP4_DPLL_ABE_DEFFREQ);
-               if (rc)
-                       pr_err("%s: failed to configure ABE DPLL!\n", __func__);
-       }
+       rc = clk_set_parent(&abe_dpll_refclk_mux_ck, &sys_32k_ck);
+       if (!rc)
+               rc = clk_set_rate(&dpll_abe_ck, OMAP4_DPLL_ABE_DEFFREQ);
+       if (rc)
+               pr_err("%s: failed to configure ABE DPLL!\n", __func__);
 
        return 0;
 }
index 5e304d0719a2ae763885d8e5468de14a1dad0257..626f3ea3142f55dfd0bcd5337a9758eab5d0cf71 100644 (file)
@@ -639,7 +639,7 @@ static int count_ocp2scp_devices(struct omap_ocp2scp_dev *ocp2scp_dev)
        return cnt;
 }
 
-static void omap_init_ocp2scp(void)
+static void __init omap_init_ocp2scp(void)
 {
        struct omap_hwmod       *oh;
        struct platform_device  *pdev;
index 4c7566c7e24a3f5ca90c5d320cc43a76fcbbd82a..2a2cfa88ddbfdd456b6522c678ac7321057ad517 100644 (file)
@@ -25,6 +25,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/platform_data/omap_drm.h>
 
+#include "soc.h"
 #include "omap_device.h"
 #include "omap_hwmod.h"
 
@@ -56,7 +57,7 @@ static int __init omap_init_drm(void)
                        oh->name);
        }
 
-       platform_data.omaprev = GET_OMAP_REVISION();
+       platform_data.omaprev = GET_OMAP_TYPE;
 
        return platform_device_register(&omap_drm_device);
 
index 129d5081ed1572146a027eae3984b84457cf01be..793f54ac7d14b7cae5117404a564d527414d3e50 100644 (file)
@@ -2132,8 +2132,12 @@ static struct omap_hwmod omap44xx_mcpdm_hwmod = {
         * currently reset very early during boot, before I2C is
         * available, so it doesn't seem that we have any choice in
         * the kernel other than to avoid resetting it.
+        *
+        * Also, McPDM needs to be configured to NO_IDLE mode when it
+        * is in used otherwise vital clocks will be gated which
+        * results 'slow motion' audio playback.
         */
-       .flags          = HWMOD_EXT_OPT_MAIN_CLK,
+       .flags          = HWMOD_EXT_OPT_MAIN_CLK | HWMOD_SWSUP_SIDLE,
        .mpu_irqs       = omap44xx_mcpdm_irqs,
        .sdma_reqs      = omap44xx_mcpdm_sdma_reqs,
        .main_clk       = "mcpdm_fck",
index 691aa674665a46cf4c8ce75c279443b82c5aff05..b8ad6e632bb84d9ed3ede854cefeeebe6b4cc00c 100644 (file)
@@ -165,15 +165,11 @@ static struct device_node * __init omap_get_timer_dt(struct of_device_id *match,
        struct device_node *np;
 
        for_each_matching_node(np, match) {
-               if (!of_device_is_available(np)) {
-                       of_node_put(np);
+               if (!of_device_is_available(np))
                        continue;
-               }
 
-               if (property && !of_get_property(np, property, NULL)) {
-                       of_node_put(np);
+               if (property && !of_get_property(np, property, NULL))
                        continue;
-               }
 
                of_add_property(np, &device_disabled);
                return np;
index d6b5073692d2fdda8db2656a032f374894e57463..44754230fdcc3e23098f1cfcacee1530af508da4 100644 (file)
 /*
  * Only define NR_IRQS if less than NR_IRQS_EB
  */
-#define NR_IRQS_EB             (IRQ_EB_GIC_START + 96)
+#define NR_IRQS_EB             (IRQ_EB_GIC_START + 128)
 
 #if defined(CONFIG_MACH_REALVIEW_EB) \
        && (!defined(NR_IRQS) || (NR_IRQS < NR_IRQS_EB))
index 553059f51841874c430d74bbbe7b4e108308fca6..755c0bb119f4c1e195c61281d776dcb92a50e6d8 100644 (file)
@@ -47,7 +47,7 @@ static struct spi_board_info wm1253_devs[] = {
                .bus_num        = 0,
                .chip_select    = 0,
                .mode           = SPI_MODE_0,
-               .irq            = S3C_EINT(5),
+               .irq            = S3C_EINT(4),
                .controller_data = &wm0010_spi_csinfo,
                .platform_data = &wm0010_pdata,
        },
index 7feb426fc202d10be8f74a8992b5de212b6e4ba0..d2e1a16690bd5807f961d6804b61dddfeb029fc7 100644 (file)
@@ -338,8 +338,10 @@ int __init s3c64xx_pm_init(void)
        for (i = 0; i < ARRAY_SIZE(s3c64xx_pm_domains); i++)
                pm_genpd_init(&s3c64xx_pm_domains[i]->pd, NULL, false);
 
+#ifdef CONFIG_S3C_DEV_FB
        if (dev_get_platdata(&s3c_device_fb.dev))
                pm_genpd_add_device(&s3c64xx_pm_f.pd, &s3c_device_fb.dev);
+#endif
 
        return 0;
 }
index 6b2fb87c8698a99254bdd56c0e4c2bf146994da5..dda3904dc64c1cb3f7681cf20998397c1e103f76 100644 (file)
@@ -640,7 +640,7 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle,
 
        if (is_coherent || nommu())
                addr = __alloc_simple_buffer(dev, size, gfp, &page);
-       else if (gfp & GFP_ATOMIC)
+       else if (!(gfp & __GFP_WAIT))
                addr = __alloc_from_pool(size, &page);
        else if (!IS_ENABLED(CONFIG_CMA))
                addr = __alloc_remap_buffer(dev, size, gfp, prot, &page, caller);
@@ -774,25 +774,27 @@ static void dma_cache_maint_page(struct page *page, unsigned long offset,
        size_t size, enum dma_data_direction dir,
        void (*op)(const void *, size_t, int))
 {
+       unsigned long pfn;
+       size_t left = size;
+
+       pfn = page_to_pfn(page) + offset / PAGE_SIZE;
+       offset %= PAGE_SIZE;
+
        /*
         * A single sg entry may refer to multiple physically contiguous
         * pages.  But we still need to process highmem pages individually.
         * If highmem is not configured then the bulk of this loop gets
         * optimized out.
         */
-       size_t left = size;
        do {
                size_t len = left;
                void *vaddr;
 
+               page = pfn_to_page(pfn);
+
                if (PageHighMem(page)) {
-                       if (len + offset > PAGE_SIZE) {
-                               if (offset >= PAGE_SIZE) {
-                                       page += offset / PAGE_SIZE;
-                                       offset %= PAGE_SIZE;
-                               }
+                       if (len + offset > PAGE_SIZE)
                                len = PAGE_SIZE - offset;
-                       }
                        vaddr = kmap_high_get(page);
                        if (vaddr) {
                                vaddr += offset;
@@ -809,7 +811,7 @@ static void dma_cache_maint_page(struct page *page, unsigned long offset,
                        op(vaddr, len, dir);
                }
                offset = 0;
-               page++;
+               pfn++;
                left -= len;
        } while (left);
 }
index 9f0610243bd6cd3357c847a5e5d392353579f471..ce328c7f5c94556cdda6021e8aef1b950aba5aa2 100644 (file)
@@ -283,7 +283,7 @@ static struct mem_type mem_types[] = {
        },
        [MT_MEMORY_SO] = {
                .prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
-                               L_PTE_MT_UNCACHED,
+                               L_PTE_MT_UNCACHED | L_PTE_XN,
                .prot_l1   = PMD_TYPE_TABLE,
                .prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_S |
                                PMD_SECT_UNCACHED | PMD_SECT_XN,
index dd703ef09b8d9d623d83e4a131c12e87e329e838..b178d44e9eaa897c8f8a3a4bb017198cb7014cae 100644 (file)
@@ -20,7 +20,7 @@
  */
 ENTRY(versatile_secondary_startup)
        mrc     p15, 0, r0, c0, c0, 5
-       and     r0, r0, #15
+       bic     r0, #0xff000000
        adr     r4, 1f
        ldmia   r4, {r5, r6}
        sub     r4, r4, r5
index cc926c98598141a2fbcdb762148ec17782982d06..323ce1a62bbfa3465230632d5d7d35c458f380fa 100644 (file)
@@ -22,7 +22,7 @@
 @  IRQs disabled.
 @
 ENTRY(do_vfp)
-#ifdef CONFIG_PREEMPT
+#ifdef CONFIG_PREEMPT_COUNT
        ldr     r4, [r10, #TI_PREEMPT]  @ get preempt count
        add     r11, r4, #1             @ increment it
        str     r11, [r10, #TI_PREEMPT]
@@ -35,7 +35,7 @@ ENTRY(do_vfp)
 ENDPROC(do_vfp)
 
 ENTRY(vfp_null_entry)
-#ifdef CONFIG_PREEMPT
+#ifdef CONFIG_PREEMPT_COUNT
        get_thread_info r10
        ldr     r4, [r10, #TI_PREEMPT]  @ get preempt count
        sub     r11, r4, #1             @ decrement it
@@ -53,7 +53,7 @@ ENDPROC(vfp_null_entry)
 
        __INIT
 ENTRY(vfp_testing_entry)
-#ifdef CONFIG_PREEMPT
+#ifdef CONFIG_PREEMPT_COUNT
        get_thread_info r10
        ldr     r4, [r10, #TI_PREEMPT]  @ get preempt count
        sub     r11, r4, #1             @ decrement it
index ea0349f6358658065b52aa1473e877ee4fa8f5ba..dd5e56f95f3fbe3d03f7be90f1201a78a93ed568 100644 (file)
@@ -168,7 +168,7 @@ vfp_hw_state_valid:
                                        @ else it's one 32-bit instruction, so
                                        @ always subtract 4 from the following
                                        @ instruction address.
-#ifdef CONFIG_PREEMPT
+#ifdef CONFIG_PREEMPT_COUNT
        get_thread_info r10
        ldr     r4, [r10, #TI_PREEMPT]  @ get preempt count
        sub     r11, r4, #1             @ decrement it
@@ -192,7 +192,7 @@ look_for_VFP_exceptions:
        @ not recognised by VFP
 
        DBGSTR  "not VFP"
-#ifdef CONFIG_PREEMPT
+#ifdef CONFIG_PREEMPT_COUNT
        get_thread_info r10
        ldr     r4, [r10, #TI_PREEMPT]  @ get preempt count
        sub     r11, r4, #1             @ decrement it
index f8f362aafee948601178c275bc81b4e9c8b51ae5..75e915b72471d3a77047a75186198fddaba2fec9 100644 (file)
@@ -21,7 +21,6 @@ config ARM64
        select HAVE_GENERIC_DMA_COHERENT
        select HAVE_GENERIC_HARDIRQS
        select HAVE_HW_BREAKPOINT if PERF_EVENTS
-       select HAVE_IRQ_WORK
        select HAVE_MEMBLOCK
        select HAVE_PERF_EVENTS
        select IRQ_DOMAIN
index aaf5199d8fcbfb69ddca12e7d48fd816f791e341..b3d18f9f3e8d466a66c44fc665e2d04f58492d4a 100644 (file)
@@ -336,4 +336,14 @@ dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
 #define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
 #define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
 
+/* drivers/base/dma-mapping.c */
+extern int dma_common_mmap(struct device *dev, struct vm_area_struct *vma,
+                          void *cpu_addr, dma_addr_t dma_addr, size_t size);
+extern int dma_common_get_sgtable(struct device *dev, struct sg_table *sgt,
+                                 void *cpu_addr, dma_addr_t dma_addr,
+                                 size_t size);
+
+#define dma_mmap_coherent(d, v, c, h, s) dma_common_mmap(d, v, c, h, s)
+#define dma_get_sgtable(d, t, v, h, s) dma_common_get_sgtable(d, t, v, h, s)
+
 #endif /* __ASM_AVR32_DMA_MAPPING_H */
index b6f3ad5441c5f33f27c44850ca8d19c9898001b7..67e4aaad78f5cda89302901f80c1227f28862336 100644 (file)
@@ -24,7 +24,6 @@ config BLACKFIN
        select HAVE_FUNCTION_TRACER
        select HAVE_FUNCTION_TRACE_MCOUNT_TEST
        select HAVE_IDE
-       select HAVE_IRQ_WORK
        select HAVE_KERNEL_GZIP if RAMKERNEL
        select HAVE_KERNEL_BZIP2 if RAMKERNEL
        select HAVE_KERNEL_LZMA if RAMKERNEL
@@ -38,7 +37,6 @@ config BLACKFIN
        select HAVE_GENERIC_HARDIRQS
        select GENERIC_ATOMIC64
        select GENERIC_IRQ_PROBE
-       select IRQ_PER_CPU if SMP
        select USE_GENERIC_SMP_HELPERS if SMP
        select HAVE_NMI_WATCHDOG if NMI_WATCHDOG
        select GENERIC_SMP_IDLE_THREAD
index bbf461076a0a2107ddc6ea932bc615fe74fdc7a1..054d9ec57d9dc1cea3eba24655a8e24349c06cef 100644 (file)
@@ -154,4 +154,14 @@ dma_cache_sync(struct device *dev, void *vaddr, size_t size,
        _dma_sync((dma_addr_t)vaddr, size, dir);
 }
 
+/* drivers/base/dma-mapping.c */
+extern int dma_common_mmap(struct device *dev, struct vm_area_struct *vma,
+                          void *cpu_addr, dma_addr_t dma_addr, size_t size);
+extern int dma_common_get_sgtable(struct device *dev, struct sg_table *sgt,
+                                 void *cpu_addr, dma_addr_t dma_addr,
+                                 size_t size);
+
+#define dma_mmap_coherent(d, v, c, h, s) dma_common_mmap(d, v, c, h, s)
+#define dma_get_sgtable(d, t, v, h, s) dma_common_get_sgtable(d, t, v, h, s)
+
 #endif                         /* _BLACKFIN_DMA_MAPPING_H */
index 3c694065030f506708a9717ef7bbb5faf94f6bc1..88bd0d899bdbedfac95bfc99450f9f6fbcc00ca0 100644 (file)
@@ -89,4 +89,19 @@ extern void dma_free_coherent(struct device *, size_t, void *, dma_addr_t);
 #define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent((d), (s), (h), (f))
 #define dma_free_noncoherent(d, s, v, h)  dma_free_coherent((d), (s), (v), (h))
 
+/* Not supported for now */
+static inline int dma_mmap_coherent(struct device *dev,
+                                   struct vm_area_struct *vma, void *cpu_addr,
+                                   dma_addr_t dma_addr, size_t size)
+{
+       return -EINVAL;
+}
+
+static inline int dma_get_sgtable(struct device *dev, struct sg_table *sgt,
+                                 void *cpu_addr, dma_addr_t dma_addr,
+                                 size_t size)
+{
+       return -EINVAL;
+}
+
 #endif /* _ASM_C6X_DMA_MAPPING_H */
index 8588b2ccf85444206480895bb067cd8c7366a558..2f0f654f1b4407484c0a22d1b418a44e5388f04f 100644 (file)
@@ -158,5 +158,15 @@ dma_cache_sync(struct device *dev, void *vaddr, size_t size,
 {
 }
 
+/* drivers/base/dma-mapping.c */
+extern int dma_common_mmap(struct device *dev, struct vm_area_struct *vma,
+                          void *cpu_addr, dma_addr_t dma_addr, size_t size);
+extern int dma_common_get_sgtable(struct device *dev, struct sg_table *sgt,
+                                 void *cpu_addr, dma_addr_t dma_addr,
+                                 size_t size);
+
+#define dma_mmap_coherent(d, v, c, h, s) dma_common_mmap(d, v, c, h, s)
+#define dma_get_sgtable(d, t, v, h, s) dma_common_get_sgtable(d, t, v, h, s)
+
 
 #endif
index 9d262645f6675275c9e2c7adca9a66b114d03b88..17df48fc8f44a419e1abd9051ccac1b4645e7ea9 100644 (file)
@@ -3,7 +3,6 @@ config FRV
        default y
        select HAVE_IDE
        select HAVE_ARCH_TRACEHOOK
-       select HAVE_IRQ_WORK
        select HAVE_PERF_EVENTS
        select HAVE_UID16
        select HAVE_GENERIC_HARDIRQS
index dfb811002c640fcc790aaecf47727a1c5f83c5fa..1746a2b8e6e7287cd9ad612caa00af6bd9cd8a28 100644 (file)
@@ -132,4 +132,19 @@ void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
        flush_write_buffers();
 }
 
+/* Not supported for now */
+static inline int dma_mmap_coherent(struct device *dev,
+                                   struct vm_area_struct *vma, void *cpu_addr,
+                                   dma_addr_t dma_addr, size_t size)
+{
+       return -EINVAL;
+}
+
+static inline int dma_get_sgtable(struct device *dev, struct sg_table *sgt,
+                                 void *cpu_addr, dma_addr_t dma_addr,
+                                 size_t size)
+{
+       return -EINVAL;
+}
+
 #endif  /* _ASM_DMA_MAPPING_H */
index 0744f7d7b1fd096b5ccbc71cab7305ea997fb3c3..e4decc6b8947e4fe68180010a524e0f7b6600084 100644 (file)
@@ -12,9 +12,7 @@ config HEXAGON
        # select ARCH_WANT_OPTIONAL_GPIOLIB
        # select ARCH_REQUIRE_GPIOLIB
        # select HAVE_CLK
-       # select IRQ_PER_CPU
        # select GENERIC_PENDING_IRQ if SMP
-       select HAVE_IRQ_WORK
        select GENERIC_ATOMIC64
        select HAVE_PERF_EVENTS
        select HAVE_GENERIC_HARDIRQS
index 3279646120e3be5bdbc970ca5297b5fce30011ee..00c2e88f77559eb9bca234936819071c83a0566b 100644 (file)
@@ -29,7 +29,6 @@ config IA64
        select ARCH_DISCARD_MEMBLOCK
        select GENERIC_IRQ_PROBE
        select GENERIC_PENDING_IRQ if SMP
-       select IRQ_PER_CPU
        select GENERIC_IRQ_SHOW
        select ARCH_WANT_OPTIONAL_GPIOLIB
        select ARCH_HAVE_NMI_SAFE_CMPXCHG
index 3e6b8445af6a07285255fc5ce0fa80ab10003d8b..292805f0762ebd100351944c0d5abe9713b07cf2 100644 (file)
@@ -115,4 +115,14 @@ static inline int dma_mapping_error(struct device *dev, dma_addr_t handle)
 #include <asm-generic/dma-mapping-broken.h>
 #endif
 
+/* drivers/base/dma-mapping.c */
+extern int dma_common_mmap(struct device *dev, struct vm_area_struct *vma,
+                          void *cpu_addr, dma_addr_t dma_addr, size_t size);
+extern int dma_common_get_sgtable(struct device *dev, struct sg_table *sgt,
+                                 void *cpu_addr, dma_addr_t dma_addr,
+                                 size_t size);
+
+#define dma_mmap_coherent(d, v, c, h, s) dma_common_mmap(d, v, c, h, s)
+#define dma_get_sgtable(d, t, v, h, s) dma_common_get_sgtable(d, t, v, h, s)
+
 #endif  /* _M68K_DMA_MAPPING_H */
index ae700f49e51da86b8b86b8ce9ee41b0a1908d6b1..b0768a657920f63c51522f2ddb0ef22da0c8dbc3 100644 (file)
@@ -130,7 +130,6 @@ extern int handle_kernel_fault(struct pt_regs *regs);
 #define start_thread(_regs, _pc, _usp)                  \
 do {                                                    \
        (_regs)->pc = (_pc);                            \
-       ((struct switch_stack *)(_regs))[-1].a6 = 0;    \
        setframeformat(_regs);                          \
        if (current->mm)                                \
                (_regs)->d5 = current->mm->start_data;  \
index 2ac626ab9d4380014a6f25a24825d79f9ee92205..9becc44d9d7a13b5f4df1f6871de8999d6b46932 100644 (file)
@@ -4,7 +4,6 @@ config MIPS
        select HAVE_GENERIC_DMA_COHERENT
        select HAVE_IDE
        select HAVE_OPROFILE
-       select HAVE_IRQ_WORK
        select HAVE_PERF_EVENTS
        select PERF_USE_VMALLOC
        select HAVE_ARCH_KGDB
@@ -2161,7 +2160,6 @@ source "mm/Kconfig"
 config SMP
        bool "Multi-Processing support"
        depends on SYS_SUPPORTS_SMP
-       select IRQ_PER_CPU
        select USE_GENERIC_SMP_HELPERS
        help
          This enables support for systems with more than one CPU. If you have
index d7af29f1fcf0079c7ccdcae5af9f0add4c8c2c80..ba611927749b9f81def164126a2b2b1d00bf42c5 100644 (file)
@@ -8,8 +8,10 @@ config BCM47XX_SSB
        select SSB_DRIVER_EXTIF
        select SSB_EMBEDDED
        select SSB_B43_PCI_BRIDGE if PCI
+       select SSB_DRIVER_PCICORE if PCI
        select SSB_PCICORE_HOSTMODE if PCI
        select SSB_DRIVER_GPIO
+       select GPIOLIB
        default y
        help
         Add support for old Broadcom BCM47xx boards with Sonics Silicon Backplane support.
@@ -25,6 +27,7 @@ config BCM47XX_BCMA
        select BCMA_HOST_PCI if PCI
        select BCMA_DRIVER_PCI_HOSTMODE if PCI
        select BCMA_DRIVER_GPIO
+       select GPIOLIB
        default y
        help
         Add support for new Broadcom BCM47xx boards with Broadcom specific Advanced Microcontroller Bus.
index 9f883bf769530d18c880416850060cd738bb0fa8..33b72144db3100625bd17991c1651ddd803ddf2b 100644 (file)
@@ -30,6 +30,7 @@
  * measurement, and debugging facilities.
  */
 
+#include <linux/compiler.h>
 #include <linux/irqflags.h>
 #include <asm/octeon/cvmx.h>
 #include <asm/octeon/cvmx-l2c.h>
@@ -285,22 +286,22 @@ uint64_t cvmx_l2c_read_perf(uint32_t counter)
  */
 static void fault_in(uint64_t addr, int len)
 {
-       volatile char *ptr;
-       volatile char dummy;
+       char *ptr;
+
        /*
         * Adjust addr and length so we get all cache lines even for
         * small ranges spanning two cache lines.
         */
        len += addr & CVMX_CACHE_LINE_MASK;
        addr &= ~CVMX_CACHE_LINE_MASK;
-       ptr = (volatile char *)cvmx_phys_to_ptr(addr);
+       ptr = cvmx_phys_to_ptr(addr);
        /*
         * Invalidate L1 cache to make sure all loads result in data
         * being in L2.
         */
        CVMX_DCACHE_INVALIDATE;
        while (len > 0) {
-               dummy += *ptr;
+               ACCESS_ONCE(*ptr);
                len -= CVMX_CACHE_LINE_SIZE;
                ptr += CVMX_CACHE_LINE_SIZE;
        }
diff --git a/arch/mips/include/asm/break.h b/arch/mips/include/asm/break.h
deleted file mode 100644 (file)
index 9161e68..0000000
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1995, 2003 by Ralf Baechle
- * Copyright (C) 1999 Silicon Graphics, Inc.
- */
-#ifndef __ASM_BREAK_H
-#define __ASM_BREAK_H
-
-/*
- * The following break codes are or were in use for specific purposes in
- * other MIPS operating systems.  Linux/MIPS doesn't use all of them.  The
- * unused ones are here as placeholders; we might encounter them in
- * non-Linux/MIPS object files or make use of them in the future.
- */
-#define BRK_USERBP     0       /* User bp (used by debuggers) */
-#define BRK_KERNELBP   1       /* Break in the kernel */
-#define BRK_ABORT      2       /* Sometimes used by abort(3) to SIGIOT */
-#define BRK_BD_TAKEN   3       /* For bd slot emulation - not implemented */
-#define BRK_BD_NOTTAKEN        4       /* For bd slot emulation - not implemented */
-#define BRK_SSTEPBP    5       /* User bp (used by debuggers) */
-#define BRK_OVERFLOW   6       /* Overflow check */
-#define BRK_DIVZERO    7       /* Divide by zero check */
-#define BRK_RANGE      8       /* Range error check */
-#define BRK_STACKOVERFLOW 9    /* For Ada stackchecking */
-#define BRK_NORLD      10      /* No rld found - not used by Linux/MIPS */
-#define _BRK_THREADBP  11      /* For threads, user bp (used by debuggers) */
-#define BRK_BUG                512     /* Used by BUG() */
-#define BRK_KDB                513     /* Used in KDB_ENTER() */
-#define BRK_MEMU       514     /* Used by FPU emulator */
-#define BRK_KPROBE_BP  515     /* Kprobe break */
-#define BRK_KPROBE_SSTEPBP 516 /* Kprobe single step software implementation */
-#define BRK_MULOVF     1023    /* Multiply overflow */
-
-#endif /* __ASM_BREAK_H */
index e9bfc0813c72e99a46b29dadb1c3556843fc31a1..7bfad0520e25731c548c949ccecc045e91bba002 100644 (file)
@@ -16,7 +16,7 @@
 #include <asm/mipsregs.h>
 
 #define DSP_DEFAULT    0x00000000
-#define DSP_MASK       0x3ff
+#define DSP_MASK       0x3f
 
 #define __enable_dsp_hazard()                                          \
 do {                                                                   \
index ab84064283db2c50d847d888b32e42a4d316dd7d..33c34adbecfa19ae457699d449d8242ed5a0f43c 100644 (file)
@@ -353,6 +353,7 @@ union mips_instruction {
        struct u_format u_format;
        struct c_format c_format;
        struct r_format r_format;
+       struct p_format p_format;
        struct f_format f_format;
        struct ma_format ma_format;
        struct b_format b_format;
index edaa06d9d492171090e10ee08ad370fae79bebe9..e410df4e1b3a650d99d8981c7b63c04d4218daf4 100644 (file)
@@ -21,4 +21,4 @@
 #define R10000_LLSC_WAR                        0
 #define MIPS34K_MISSED_ITLB_WAR                0
 
-#endif /* __ASM_MIPS_MACH_PNX8550_WAR_H */
+#endif /* __ASM_MIPS_MACH_PNX833X_WAR_H */
index c63191055e695c5a49812f3f32ed0c913d941a0a..013d5f781263e20cf3d9e93cf14b6552c4386cc8 100644 (file)
@@ -230,6 +230,7 @@ static inline void pud_clear(pud_t *pudp)
 #else
 #define pte_pfn(x)             ((unsigned long)((x).pte >> _PFN_SHIFT))
 #define pfn_pte(pfn, prot)     __pte(((pfn) << _PFN_SHIFT) | pgprot_val(prot))
+#define pfn_pmd(pfn, prot)     __pmd(((pfn) << _PFN_SHIFT) | pgprot_val(prot))
 #endif
 
 #define __pgd_offset(address)  pgd_index(address)
index a1a0452ac1853333b07dac4dc7495c9bdd2514a5..77d4fb33f75ad1dd765ba69f697ed771312b3e9a 100644 (file)
@@ -3,6 +3,7 @@ include include/uapi/asm-generic/Kbuild.asm
 
 header-y += auxvec.h
 header-y += bitsperlong.h
+header-y += break.h
 header-y += byteorder.h
 header-y += cachectl.h
 header-y += errno.h
diff --git a/arch/mips/include/uapi/asm/break.h b/arch/mips/include/uapi/asm/break.h
new file mode 100644 (file)
index 0000000..9161e68
--- /dev/null
@@ -0,0 +1,37 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 2003 by Ralf Baechle
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ */
+#ifndef __ASM_BREAK_H
+#define __ASM_BREAK_H
+
+/*
+ * The following break codes are or were in use for specific purposes in
+ * other MIPS operating systems.  Linux/MIPS doesn't use all of them.  The
+ * unused ones are here as placeholders; we might encounter them in
+ * non-Linux/MIPS object files or make use of them in the future.
+ */
+#define BRK_USERBP     0       /* User bp (used by debuggers) */
+#define BRK_KERNELBP   1       /* Break in the kernel */
+#define BRK_ABORT      2       /* Sometimes used by abort(3) to SIGIOT */
+#define BRK_BD_TAKEN   3       /* For bd slot emulation - not implemented */
+#define BRK_BD_NOTTAKEN        4       /* For bd slot emulation - not implemented */
+#define BRK_SSTEPBP    5       /* User bp (used by debuggers) */
+#define BRK_OVERFLOW   6       /* Overflow check */
+#define BRK_DIVZERO    7       /* Divide by zero check */
+#define BRK_RANGE      8       /* Range error check */
+#define BRK_STACKOVERFLOW 9    /* For Ada stackchecking */
+#define BRK_NORLD      10      /* No rld found - not used by Linux/MIPS */
+#define _BRK_THREADBP  11      /* For threads, user bp (used by debuggers) */
+#define BRK_BUG                512     /* Used by BUG() */
+#define BRK_KDB                513     /* Used in KDB_ENTER() */
+#define BRK_MEMU       514     /* Used by FPU emulator */
+#define BRK_KPROBE_BP  515     /* Kprobe break */
+#define BRK_KPROBE_SSTEPBP 516 /* Kprobe single step software implementation */
+#define BRK_MULOVF     1023    /* Multiply overflow */
+
+#endif /* __ASM_BREAK_H */
index 6a2d758dd8e9ed0b4a0afb043d2972869620834c..83fa1460e294e02cf602cd5d611af6d02abbba39 100644 (file)
 #define MCOUNT_OFFSET_INSNS 4
 #endif
 
+/* Arch override because MIPS doesn't need to run this from stop_machine() */
+void arch_ftrace_update_code(int command)
+{
+       ftrace_modify_all_code(command);
+}
+
 /*
  * Check if the address is in kernel space
  *
@@ -89,6 +95,24 @@ static int ftrace_modify_code(unsigned long ip, unsigned int new_code)
        return 0;
 }
 
+#ifndef CONFIG_64BIT
+static int ftrace_modify_code_2(unsigned long ip, unsigned int new_code1,
+                               unsigned int new_code2)
+{
+       int faulted;
+
+       safe_store_code(new_code1, ip, faulted);
+       if (unlikely(faulted))
+               return -EFAULT;
+       ip += 4;
+       safe_store_code(new_code2, ip, faulted);
+       if (unlikely(faulted))
+               return -EFAULT;
+       flush_icache_range(ip, ip + 8); /* original ip + 12 */
+       return 0;
+}
+#endif
+
 /*
  * The details about the calling site of mcount on MIPS
  *
@@ -131,8 +155,18 @@ int ftrace_make_nop(struct module *mod,
         * needed.
         */
        new = in_kernel_space(ip) ? INSN_NOP : INSN_B_1F;
-
+#ifdef CONFIG_64BIT
        return ftrace_modify_code(ip, new);
+#else
+       /*
+        * On 32 bit MIPS platforms, gcc adds a stack adjust
+        * instruction in the delay slot after the branch to
+        * mcount and expects mcount to restore the sp on return.
+        * This is based on a legacy API and does nothing but
+        * waste instructions so it's being removed at runtime.
+        */
+       return ftrace_modify_code_2(ip, new, INSN_NOP);
+#endif
 }
 
 int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
index 4c968e7efb747d997ec20ba8ceeb500f4c12807d..1658676733576e74867347f0f7d122df0c5a023e 100644 (file)
@@ -46,9 +46,8 @@
        PTR_L   a5, PT_R9(sp)
        PTR_L   a6, PT_R10(sp)
        PTR_L   a7, PT_R11(sp)
-       PTR_ADDIU       sp, PT_SIZE
 #else
-       PTR_ADDIU       sp, (PT_SIZE + 8)
+       PTR_ADDIU       sp, PT_SIZE
 #endif
 .endm
 
@@ -69,7 +68,9 @@ NESTED(ftrace_caller, PT_SIZE, ra)
        .globl _mcount
 _mcount:
        b       ftrace_stub
-        nop
+       addiu sp,sp,8
+
+       /* When tracing is activated, it calls ftrace_caller+8 (aka here) */
        lw      t1, function_trace_stop
        bnez    t1, ftrace_stub
         nop
index eec690af6581616957089993e2decfd91f13b4fd..147cec19621d7a433429e66433fdd993c2abd62e 100644 (file)
@@ -705,7 +705,7 @@ static int vpe_run(struct vpe * v)
 
                        printk(KERN_WARNING
                               "VPE loader: TC %d is already in use.\n",
-                               t->index);
+                              v->tc->index);
                        return -ENOEXEC;
                }
        } else {
index f36acd1b38086d341458d927c4c4db99d3a40e0f..a7935bf0fecbf789299a2547abb7b0b2e8677e2b 100644 (file)
@@ -408,7 +408,7 @@ int __init icu_of_init(struct device_node *node, struct device_node *parent)
 #endif
 
        /* tell oprofile which irq to use */
-       cp0_perfcount_irq = LTQ_PERF_IRQ;
+       cp0_perfcount_irq = irq_create_mapping(ltq_domain, LTQ_PERF_IRQ);
 
        /*
         * if the timer irq is not one of the mips irqs we need to
index dc81ca8dc0dd4b0ccd81ae2edc78b059aa8fd016..288f7954988d06ef61cc94bbf29dfeab322796b8 100644 (file)
@@ -21,7 +21,7 @@ void __delay(unsigned long loops)
        "       .set    noreorder                               \n"
        "       .align  3                                       \n"
        "1:     bnez    %0, 1b                                  \n"
-#if __SIZEOF_LONG__ == 4
+#if BITS_PER_LONG == 32
        "       subu    %0, 1                                   \n"
 #else
        "       dsubu   %0, 1                                   \n"
index 7657fd21cd3fb35779ad6a37ff65c73547cedc88..cacfd31e8ec9d1121c86e81feb35fac4344a9a3b 100644 (file)
@@ -190,9 +190,3 @@ void __iounmap(const volatile void __iomem *addr)
 
 EXPORT_SYMBOL(__ioremap);
 EXPORT_SYMBOL(__iounmap);
-
-int __virt_addr_valid(const volatile void *kaddr)
-{
-       return pfn_valid(PFN_DOWN(virt_to_phys(kaddr)));
-}
-EXPORT_SYMBOL_GPL(__virt_addr_valid);
index d9be7540a6be7979a265a3ce32acbbe241b2b91c..7e5fe2790d8a212a8d0163989280918d26a46a3c 100644 (file)
@@ -192,3 +192,9 @@ unsigned long arch_randomize_brk(struct mm_struct *mm)
 
        return ret;
 }
+
+int __virt_addr_valid(const volatile void *kaddr)
+{
+       return pfn_valid(PFN_DOWN(virt_to_phys(kaddr)));
+}
+EXPORT_SYMBOL_GPL(__virt_addr_valid);
index 4e7f49d3d5a8105c45dd09a6b86999ed0506a7d7..c5ce6992ac4c7086aea4167a7460723a5d0cb7be 100644 (file)
@@ -193,8 +193,11 @@ static void nlm_init_node(void)
 
 void __init prom_init(void)
 {
-       int i, *argv, *envp;            /* passed as 32 bit ptrs */
+       int *argv, *envp;               /* passed as 32 bit ptrs */
        struct psb_info *prom_infop;
+#ifdef CONFIG_SMP
+       int i;
+#endif
 
        /* truncate to 32 bit and sign extend all args */
        argv = (int *)(long)(int)fw_arg1;
index 1552522b8718bffb86762229ef5279b93094df16..6eaa4f2d0e38cb8c85e31734c7e090ec9a491cb3 100644 (file)
@@ -24,7 +24,7 @@
 #include <asm/mach-ath79/pci.h>
 
 #define AR71XX_PCI_MEM_BASE    0x10000000
-#define AR71XX_PCI_MEM_SIZE    0x08000000
+#define AR71XX_PCI_MEM_SIZE    0x07000000
 
 #define AR71XX_PCI_WIN0_OFFS           0x10000000
 #define AR71XX_PCI_WIN1_OFFS           0x11000000
index 86d77a666458bae80c60f94c9fc405dca5f8459c..c11c75be2d7e06ab0b1232c35926a8ec3c5ba574 100644 (file)
@@ -21,7 +21,7 @@
 #define AR724X_PCI_CTRL_SIZE   0x100
 
 #define AR724X_PCI_MEM_BASE    0x10000000
-#define AR724X_PCI_MEM_SIZE    0x08000000
+#define AR724X_PCI_MEM_SIZE    0x04000000
 
 #define AR724X_PCI_REG_RESET           0x18
 #define AR724X_PCI_REG_INT_STATUS      0x4c
index c1be4397b1edb4b059e917331c5ef8173bcf1096..a18abfc558eb1d41b99cd22798976f517196b7bd 100644 (file)
@@ -168,4 +168,19 @@ void dma_cache_sync(void *vaddr, size_t size,
        mn10300_dcache_flush_inv();
 }
 
+/* Not supported for now */
+static inline int dma_mmap_coherent(struct device *dev,
+                                   struct vm_area_struct *vma, void *cpu_addr,
+                                   dma_addr_t dma_addr, size_t size)
+{
+       return -EINVAL;
+}
+
+static inline int dma_get_sgtable(struct device *dev, struct sg_table *sgt,
+                                 void *cpu_addr, dma_addr_t dma_addr,
+                                 size_t size)
+{
+       return -EINVAL;
+}
+
 #endif
index b77feffbadea9b91f46d85be47d35a0f49d4b2f4..a32e34ecda9e49f9d3ee88e8c94621d441026bd0 100644 (file)
@@ -9,14 +9,12 @@ config PARISC
        select RTC_DRV_GENERIC
        select INIT_ALL_POSSIBLE
        select BUG
-       select HAVE_IRQ_WORK
        select HAVE_PERF_EVENTS
        select GENERIC_ATOMIC64 if !64BIT
        select HAVE_GENERIC_HARDIRQS
        select BROKEN_RODATA
        select GENERIC_IRQ_PROBE
        select GENERIC_PCI_IOMAP
-       select IRQ_PER_CPU
        select ARCH_HAVE_NMI_SAFE_CMPXCHG
        select GENERIC_SMP_IDLE_THREAD
        select GENERIC_STRNCPY_FROM_USER
index 467bbd510eac04a5bc86a3f97f70332cf636ec19..106b395688e1d167bf764a76de70d5d58e4109d7 100644 (file)
@@ -238,4 +238,19 @@ void * sba_get_iommu(struct parisc_device *dev);
 /* At the moment, we panic on error for IOMMU resource exaustion */
 #define dma_mapping_error(dev, x)      0
 
+/* This API cannot be supported on PA-RISC */
+static inline int dma_mmap_coherent(struct device *dev,
+                                   struct vm_area_struct *vma, void *cpu_addr,
+                                   dma_addr_t dma_addr, size_t size)
+{
+       return -EINVAL;
+}
+
+static inline int dma_get_sgtable(struct device *dev, struct sg_table *sgt,
+                                 void *cpu_addr, dma_addr_t dma_addr,
+                                 size_t size)
+{
+       return -EINVAL;
+}
+
 #endif
index 17903f1f356be5790d6ddcde1ff3d5eabaf2ed78..561ccca7b1a7aa3c36d82beeb2f764568c45fecb 100644 (file)
@@ -118,14 +118,12 @@ config PPC
        select HAVE_SYSCALL_WRAPPERS if PPC64
        select GENERIC_ATOMIC64 if PPC32
        select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
-       select HAVE_IRQ_WORK
        select HAVE_PERF_EVENTS
        select HAVE_REGS_AND_STACK_ACCESS_API
        select HAVE_HW_BREAKPOINT if PERF_EVENTS && PPC_BOOK3S_64
        select HAVE_GENERIC_HARDIRQS
        select ARCH_WANT_IPC_PARSE_VERSION
        select SPARSE_IRQ
-       select IRQ_PER_CPU
        select IRQ_DOMAIN
        select GENERIC_IRQ_SHOW
        select GENERIC_IRQ_SHOW_LEVEL
index d22e73e4618b7924879517f1f59cb99dcd63b43e..e514de57a125333a4ce174cb399070b6cc62e3b4 100644 (file)
@@ -439,6 +439,8 @@ ret_from_fork:
 ret_from_kernel_thread:
        REST_NVGPRS(r1)
        bl      schedule_tail
+       li      r3,0
+       stw     r3,0(r1)
        mtlr    r14
        mr      r3,r15
        PPC440EP_ERR42
index b310a0573625dec8a672c267ab6158f8e90b37a6..3d990d3bd8baf5923d019208f7782d42e7f8a458 100644 (file)
@@ -664,6 +664,19 @@ resume_kernel:
        ld      r4,TI_FLAGS(r9)
        andi.   r0,r4,_TIF_NEED_RESCHED
        bne     1b
+
+       /*
+        * arch_local_irq_restore() from preempt_schedule_irq above may
+        * enable hard interrupt but we really should disable interrupts
+        * when we return from the interrupt, and so that we don't get
+        * interrupted after loading SRR0/1.
+        */
+#ifdef CONFIG_PPC_BOOK3E
+       wrteei  0
+#else
+       ld      r10,PACAKMSR(r13) /* Get kernel MSR without EE */
+       mtmsrd  r10,1             /* Update machine state */
+#endif /* CONFIG_PPC_BOOK3E */
 #endif /* CONFIG_PREEMPT */
 
        .globl  fast_exc_return_irq
index c470a40b29f5d4937883cfcd8a40dd1c6bbdcfd1..a7bc7521c0645c6eb697308f039fb74eaad6b4af 100644 (file)
@@ -154,12 +154,12 @@ static int kgdb_handle_breakpoint(struct pt_regs *regs)
 static int kgdb_singlestep(struct pt_regs *regs)
 {
        struct thread_info *thread_info, *exception_thread_info;
-       struct thread_info *backup_current_thread_info = \
-               (struct thread_info *)kmalloc(sizeof(struct thread_info), GFP_KERNEL);
+       struct thread_info *backup_current_thread_info;
 
        if (user_mode(regs))
                return 0;
 
+       backup_current_thread_info = (struct thread_info *)kmalloc(sizeof(struct thread_info), GFP_KERNEL);
        /*
         * On Book E and perhaps other processors, singlestep is handled on
         * the critical exception stack.  This causes current_thread_info()
@@ -185,6 +185,7 @@ static int kgdb_singlestep(struct pt_regs *regs)
                /* Restore current_thread_info lastly. */
                memcpy(exception_thread_info, backup_current_thread_info, sizeof *thread_info);
 
+       kfree(backup_current_thread_info);
        return 1;
 }
 
index 6f6b1cccc91662037115e69dc072ac1f7a376be5..127361e093f49931a87f3fdbc8cad4c88eae5679 100644 (file)
@@ -494,10 +494,15 @@ void timer_interrupt(struct pt_regs * regs)
        set_dec(DECREMENTER_MAX);
 
        /* Some implementations of hotplug will get timer interrupts while
-        * offline, just ignore these
+        * offline, just ignore these and we also need to set
+        * decrementers_next_tb as MAX to make sure __check_irq_replay
+        * don't replay timer interrupt when return, otherwise we'll trap
+        * here infinitely :(
         */
-       if (!cpu_online(smp_processor_id()))
+       if (!cpu_online(smp_processor_id())) {
+               *next_tb = ~(u64)0;
                return;
+       }
 
        /* Conditionally hard-enable interrupts now that the DEC has been
         * bumped to its maximum value
index b0855e5d8905ee50e6422ca9edfc37aa952f6b21..9d9cddc5b346ff9518009539c08804b1cf0f9682 100644 (file)
@@ -39,6 +39,7 @@
 #define OP_31_XOP_TRAP      4
 #define OP_31_XOP_LWZX      23
 #define OP_31_XOP_TRAP_64   68
+#define OP_31_XOP_DCBF      86
 #define OP_31_XOP_LBZX      87
 #define OP_31_XOP_STWX      151
 #define OP_31_XOP_STBX      215
@@ -374,6 +375,7 @@ int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu)
                        emulated = kvmppc_emulate_mtspr(vcpu, sprn, rs);
                        break;
 
+               case OP_31_XOP_DCBF:
                case OP_31_XOP_DCBI:
                        /* Do nothing. The guest is performing dcbi because
                         * hardware DMA is not snooped by the dcache, but
index 56585086413a4f9876c70eb6b6ea9f3cf1c1ef69..7443481a315c4922063a5f8801c62ee9bfb7691f 100644 (file)
@@ -115,11 +115,13 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
        sldi    r29,r5,SID_SHIFT - VPN_SHIFT
        rldicl  r28,r3,64 - VPN_SHIFT,64 - (SID_SHIFT - VPN_SHIFT)
        or      r29,r28,r29
-
-       /* Calculate hash value for primary slot and store it in r28 */
-       rldicl  r5,r5,0,25              /* vsid & 0x0000007fffffffff */
-       rldicl  r0,r3,64-12,48          /* (ea >> 12) & 0xffff */
-       xor     r28,r5,r0
+       /*
+        * Calculate hash value for primary slot and store it in r28
+        * r3 = va, r5 = vsid
+        * r0 = (va >> 12) & ((1ul << (28 - 12)) -1)
+        */
+       rldicl  r0,r3,64-12,48
+       xor     r28,r5,r0               /* hash */
        b       4f
 
 3:     /* Calc vpn and put it in r29 */
@@ -130,11 +132,12 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
        /*
         * calculate hash value for primary slot and
         * store it in r28 for 1T segment
+        * r3 = va, r5 = vsid
         */
-       rldic   r28,r5,25,25            /* (vsid << 25) & 0x7fffffffff */
-       clrldi  r5,r5,40                /* vsid & 0xffffff */
-       rldicl  r0,r3,64-12,36          /* (ea >> 12) & 0xfffffff */
-       xor     r28,r28,r5
+       sldi    r28,r5,25               /* vsid << 25 */
+       /* r0 =  (va >> 12) & ((1ul << (40 - 12)) -1) */
+       rldicl  r0,r3,64-12,36
+       xor     r28,r28,r5              /* vsid ^ ( vsid << 25) */
        xor     r28,r28,r0              /* hash */
 
        /* Convert linux PTE bits into HW equivalents */
@@ -407,11 +410,13 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
         */
        rldicl  r28,r3,64 - VPN_SHIFT,64 - (SID_SHIFT - VPN_SHIFT)
        or      r29,r28,r29
-
-       /* Calculate hash value for primary slot and store it in r28 */
-       rldicl  r5,r5,0,25              /* vsid & 0x0000007fffffffff */
-       rldicl  r0,r3,64-12,48          /* (ea >> 12) & 0xffff */
-       xor     r28,r5,r0
+       /*
+        * Calculate hash value for primary slot and store it in r28
+        * r3 = va, r5 = vsid
+        * r0 = (va >> 12) & ((1ul << (28 - 12)) -1)
+        */
+       rldicl  r0,r3,64-12,48
+       xor     r28,r5,r0               /* hash */
        b       4f
 
 3:     /* Calc vpn and put it in r29 */
@@ -426,11 +431,12 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
        /*
         * Calculate hash value for primary slot and
         * store it in r28  for 1T segment
+        * r3 = va, r5 = vsid
         */
-       rldic   r28,r5,25,25            /* (vsid << 25) & 0x7fffffffff */
-       clrldi  r5,r5,40                /* vsid & 0xffffff */
-       rldicl  r0,r3,64-12,36          /* (ea >> 12) & 0xfffffff */
-       xor     r28,r28,r5
+       sldi    r28,r5,25               /* vsid << 25 */
+       /* r0 = (va >> 12) & ((1ul << (40 - 12)) -1) */
+       rldicl  r0,r3,64-12,36
+       xor     r28,r28,r5              /* vsid ^ ( vsid << 25) */
        xor     r28,r28,r0              /* hash */
 
        /* Convert linux PTE bits into HW equivalents */
@@ -752,25 +758,27 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
        rldicl  r28,r3,64 - VPN_SHIFT,64 - (SID_SHIFT - VPN_SHIFT)
        or      r29,r28,r29
 
-       /* Calculate hash value for primary slot and store it in r28 */
-       rldicl  r5,r5,0,25              /* vsid & 0x0000007fffffffff */
-       rldicl  r0,r3,64-16,52          /* (ea >> 16) & 0xfff */
-       xor     r28,r5,r0
+       /* Calculate hash value for primary slot and store it in r28
+        * r3 = va, r5 = vsid
+        * r0 = (va >> 16) & ((1ul << (28 - 16)) -1)
+        */
+       rldicl  r0,r3,64-16,52
+       xor     r28,r5,r0               /* hash */
        b       4f
 
 3:     /* Calc vpn and put it in r29 */
        sldi    r29,r5,SID_SHIFT_1T - VPN_SHIFT
        rldicl  r28,r3,64 - VPN_SHIFT,64 - (SID_SHIFT_1T - VPN_SHIFT)
        or      r29,r28,r29
-
        /*
         * calculate hash value for primary slot and
         * store it in r28 for 1T segment
+        * r3 = va, r5 = vsid
         */
-       rldic   r28,r5,25,25            /* (vsid << 25) & 0x7fffffffff */
-       clrldi  r5,r5,40                /* vsid & 0xffffff */
-       rldicl  r0,r3,64-16,40          /* (ea >> 16) & 0xffffff */
-       xor     r28,r28,r5
+       sldi    r28,r5,25               /* vsid << 25 */
+       /* r0 = (va >> 16) & ((1ul << (40 - 16)) -1) */
+       rldicl  r0,r3,64-16,40
+       xor     r28,r28,r5              /* vsid ^ ( vsid << 25) */
        xor     r28,r28,r0              /* hash */
 
        /* Convert linux PTE bits into HW equivalents */
index 315f9495e9b2b5aa42a6c9aaba5a6307ac03ddde..f444b94935f560f6a7abf1a1de46d88cd32e71d5 100644 (file)
@@ -52,7 +52,7 @@ static int power7_marked_instr_event(u64 mmcr1)
        for (pmc = 0; pmc < 4; pmc++) {
                psel = mmcr1 & (OPROFILE_PM_PMCSEL_MSK
                                << (OPROFILE_MAX_PMC_NUM - pmc)
-                               * OPROFILE_MAX_PMC_NUM);
+                               * OPROFILE_PMSEL_FIELD_WIDTH);
                psel = (psel >> ((OPROFILE_MAX_PMC_NUM - pmc)
                                 * OPROFILE_PMSEL_FIELD_WIDTH)) & ~1ULL;
                unit = mmcr1 & (OPROFILE_PM_UNIT_MSK
index 95d00173029f52c498902a586a24917f09e99d4b..890f30e70f98fc52a39f063172cfbadc5e8713b4 100644 (file)
@@ -236,6 +236,13 @@ out:
 
 static int pas_cpufreq_cpu_exit(struct cpufreq_policy *policy)
 {
+       /*
+        * We don't support CPU hotplug. Don't unmap after the system
+        * has already made it to a running state.
+        */
+       if (system_state != SYSTEM_BOOTING)
+               return 0;
+
        if (sdcasr_mapbase)
                iounmap(sdcasr_mapbase);
        if (sdcpwr_mapbase)
index b5ea38c2564753df883026f83fece8ab484df68c..c15ba7d1be643d9251079bba0d984a11f7d3d425 100644 (file)
@@ -78,7 +78,6 @@ config S390
        select HAVE_KVM if 64BIT
        select HAVE_ARCH_TRACEHOOK
        select INIT_ALL_POSSIBLE
-       select HAVE_IRQ_WORK
        select HAVE_PERF_EVENTS
        select ARCH_HAVE_NMI_SAFE_CMPXCHG
        select HAVE_DEBUG_KMEMLEAK
index c1d7930a82f4527657fa6eda9501dae446c164a9..098adbb62660be234d4d2ed5171d5c0615027f31 100644 (file)
@@ -1365,6 +1365,18 @@ static inline void pmdp_invalidate(struct vm_area_struct *vma,
        __pmd_idte(address, pmdp);
 }
 
+#define __HAVE_ARCH_PMDP_SET_WRPROTECT
+static inline void pmdp_set_wrprotect(struct mm_struct *mm,
+                                     unsigned long address, pmd_t *pmdp)
+{
+       pmd_t pmd = *pmdp;
+
+       if (pmd_write(pmd)) {
+               __pmd_idte(address, pmdp);
+               set_pmd_at(mm, address, pmdp, pmd_wrprotect(pmd));
+       }
+}
+
 static inline pmd_t mk_pmd_phys(unsigned long physpage, pgprot_t pgprot)
 {
        pmd_t __pmd;
index a5f4f5a1d24b951ac8e7e10cc9af81e153208c63..0aa98db8a80dff08f4ba392139e80eec173bfd62 100644 (file)
@@ -120,6 +120,9 @@ static int s390_next_ktime(ktime_t expires,
        nsecs = ktime_to_ns(ktime_add(timespec_to_ktime(ts), expires));
        do_div(nsecs, 125);
        S390_lowcore.clock_comparator = sched_clock_base_cc + (nsecs << 9);
+       /* Program the maximum value if we have an overflow (== year 2042) */
+       if (unlikely(S390_lowcore.clock_comparator < sched_clock_base_cc))
+               S390_lowcore.clock_comparator = -1ULL;
        set_clock_comparator(S390_lowcore.clock_comparator);
        return 0;
 }
index babc2b826c5caf5f26f9a029452e5067451190c1..9c833c5858712b88897eec7c135842242d8e2d75 100644 (file)
@@ -11,7 +11,6 @@ config SUPERH
        select HAVE_ARCH_TRACEHOOK
        select HAVE_DMA_API_DEBUG
        select HAVE_DMA_ATTRS
-       select HAVE_IRQ_WORK
        select HAVE_PERF_EVENTS
        select HAVE_DEBUG_BUGVERBOSE
        select ARCH_HAVE_CUSTOM_GPIO_H
@@ -91,9 +90,6 @@ config GENERIC_CSUM
 config GENERIC_HWEIGHT
        def_bool y
 
-config IRQ_PER_CPU
-       def_bool y
-
 config GENERIC_GPIO
        def_bool n
 
index 9f2edb5c555179de8d00ee5d2031546df35f8a9d..9bff3db17c8c8ad66952ec3d0d557e2f5433e311 100644 (file)
@@ -23,7 +23,6 @@ config SPARC
        select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
        select RTC_CLASS
        select RTC_DRV_M48T59
-       select HAVE_IRQ_WORK
        select HAVE_DMA_ATTRS
        select HAVE_DMA_API_DEBUG
        select HAVE_ARCH_JUMP_LABEL
@@ -61,6 +60,7 @@ config SPARC64
        select HAVE_MEMBLOCK
        select HAVE_MEMBLOCK_NODE_MAP
        select HAVE_SYSCALL_WRAPPERS
+       select HAVE_ARCH_TRANSPARENT_HUGEPAGE
        select HAVE_DYNAMIC_FTRACE
        select HAVE_FTRACE_MCOUNT_RECORD
        select HAVE_SYSCALL_TRACEPOINTS
index 7870be0f5adc4d922c21874f06af9bedacc2dfd2..08fcce90316b36654dea14af5525a94a0cded6e8 100644 (file)
@@ -71,7 +71,6 @@
 #define PMD_PADDR      _AC(0xfffffffe,UL)
 #define PMD_PADDR_SHIFT        _AC(11,UL)
 
-#ifdef CONFIG_TRANSPARENT_HUGEPAGE
 #define PMD_ISHUGE     _AC(0x00000001,UL)
 
 /* This is the PMD layout when PMD_ISHUGE is set.  With 4MB huge
@@ -86,7 +85,6 @@
 #define PMD_HUGE_ACCESSED      _AC(0x00000080,UL)
 #define PMD_HUGE_EXEC          _AC(0x00000040,UL)
 #define PMD_HUGE_SPLITTING     _AC(0x00000020,UL)
-#endif
 
 /* PGDs point to PMD tables which are 8K aligned.  */
 #define PGD_PADDR      _AC(0xfffffffc,UL)
@@ -628,6 +626,12 @@ static inline unsigned long pte_special(pte_t pte)
        return pte_val(pte) & _PAGE_SPECIAL;
 }
 
+static inline int pmd_large(pmd_t pmd)
+{
+       return (pmd_val(pmd) & (PMD_ISHUGE | PMD_HUGE_PRESENT)) ==
+               (PMD_ISHUGE | PMD_HUGE_PRESENT);
+}
+
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
 static inline int pmd_young(pmd_t pmd)
 {
@@ -646,12 +650,6 @@ static inline unsigned long pmd_pfn(pmd_t pmd)
        return val >> (PAGE_SHIFT - PMD_PADDR_SHIFT);
 }
 
-static inline int pmd_large(pmd_t pmd)
-{
-       return (pmd_val(pmd) & (PMD_ISHUGE | PMD_HUGE_PRESENT)) ==
-               (PMD_ISHUGE | PMD_HUGE_PRESENT);
-}
-
 static inline int pmd_trans_splitting(pmd_t pmd)
 {
        return (pmd_val(pmd) & (PMD_ISHUGE|PMD_HUGE_SPLITTING)) ==
index 1271b3a27d4ef4722834d89d16c6ad42373a27d1..be5bdf93c7676cfedffd91d645bffa3fe9cff419 100644 (file)
@@ -554,10 +554,8 @@ static void __init sbus_iommu_init(struct platform_device *op)
        regs = pr->phys_addr;
 
        iommu = kzalloc(sizeof(*iommu), GFP_ATOMIC);
-       if (!iommu)
-               goto fatal_memory_error;
        strbuf = kzalloc(sizeof(*strbuf), GFP_ATOMIC);
-       if (!strbuf)
+       if (!iommu || !strbuf)
                goto fatal_memory_error;
 
        op->dev.archdata.iommu = iommu;
@@ -656,6 +654,8 @@ static void __init sbus_iommu_init(struct platform_device *op)
        return;
 
 fatal_memory_error:
+       kfree(iommu);
+       kfree(strbuf);
        prom_printf("sbus_iommu_init: Fatal memory allocation error.\n");
 }
 
index 42c55df3aec300b5baee79e6af5123ab99c7b126..01ee23dd724d5812b7993245b8bcb15bb0a00a7a 100644 (file)
@@ -66,6 +66,56 @@ static noinline int gup_pte_range(pmd_t pmd, unsigned long addr,
        return 1;
 }
 
+static int gup_huge_pmd(pmd_t *pmdp, pmd_t pmd, unsigned long addr,
+                       unsigned long end, int write, struct page **pages,
+                       int *nr)
+{
+       struct page *head, *page, *tail;
+       u32 mask;
+       int refs;
+
+       mask = PMD_HUGE_PRESENT;
+       if (write)
+               mask |= PMD_HUGE_WRITE;
+       if ((pmd_val(pmd) & mask) != mask)
+               return 0;
+
+       refs = 0;
+       head = pmd_page(pmd);
+       page = head + ((addr & ~PMD_MASK) >> PAGE_SHIFT);
+       tail = page;
+       do {
+               VM_BUG_ON(compound_head(page) != head);
+               pages[*nr] = page;
+               (*nr)++;
+               page++;
+               refs++;
+       } while (addr += PAGE_SIZE, addr != end);
+
+       if (!page_cache_add_speculative(head, refs)) {
+               *nr -= refs;
+               return 0;
+       }
+
+       if (unlikely(pmd_val(pmd) != pmd_val(*pmdp))) {
+               *nr -= refs;
+               while (refs--)
+                       put_page(head);
+               return 0;
+       }
+
+       /* Any tail page need their mapcount reference taken before we
+        * return.
+        */
+       while (refs--) {
+               if (PageTail(tail))
+                       get_huge_page_tail(tail);
+               tail++;
+       }
+
+       return 1;
+}
+
 static int gup_pmd_range(pud_t pud, unsigned long addr, unsigned long end,
                int write, struct page **pages, int *nr)
 {
@@ -77,9 +127,14 @@ static int gup_pmd_range(pud_t pud, unsigned long addr, unsigned long end,
                pmd_t pmd = *pmdp;
 
                next = pmd_addr_end(addr, end);
-               if (pmd_none(pmd))
+               if (pmd_none(pmd) || pmd_trans_splitting(pmd))
                        return 0;
-               if (!gup_pte_range(pmd, addr, next, write, pages, nr))
+               if (unlikely(pmd_large(pmd))) {
+                       if (!gup_huge_pmd(pmdp, pmd, addr, next,
+                                         write, pages, nr))
+                               return 0;
+               } else if (!gup_pte_range(pmd, addr, next, write,
+                                         pages, nr))
                        return 0;
        } while (pmdp++, addr = next, addr != end);
 
index 875d008828b8ec619c295cf1b2d5c8923ea0389b..1bb7ad4aeff4754937bdc09f667110d28348fc96 100644 (file)
@@ -140,6 +140,8 @@ config ARCH_DEFCONFIG
 
 source "init/Kconfig"
 
+source "kernel/Kconfig.freezer"
+
 menu "Tilera-specific configuration"
 
 config NR_CPUS
index 2a9b293fece6c00f2c71d8c5829340bb842970e5..31672918064cf781d9cf0197d812237125c4d8d0 100644 (file)
@@ -250,7 +250,9 @@ static inline void writeq(u64 val, unsigned long addr)
 #define iowrite32 writel
 #define iowrite64 writeq
 
-static inline void memset_io(void *dst, int val, size_t len)
+#if CHIP_HAS_MMIO() || defined(CONFIG_PCI)
+
+static inline void memset_io(volatile void *dst, int val, size_t len)
 {
        int x;
        BUG_ON((unsigned long)dst & 0x3);
@@ -277,6 +279,8 @@ static inline void memcpy_toio(volatile void __iomem *dst, const void *src,
                writel(*(u32 *)(src + x), dst + x);
 }
 
+#endif
+
 /*
  * The Tile architecture does not support IOPORT, even with PCI.
  * Unfortunately we can't yet simply not declare these methods,
index b4e96fef2cf8edc0b4931af8edcce502c7bebd4f..241c0bb60b12e5cf4e9eedce50279d648d313e25 100644 (file)
 #include <arch/interrupts.h>
 #include <arch/chip.h>
 
-#if !defined(__tilegx__) && defined(__ASSEMBLY__)
-
 /*
  * The set of interrupts we want to allow when interrupts are nominally
  * disabled.  The remainder are effectively "NMI" interrupts from
  * the point of view of the generic Linux code.  Note that synchronous
  * interrupts (aka "non-queued") are not blocked by the mask in any case.
  */
-#if CHIP_HAS_AUX_PERF_COUNTERS()
-#define LINUX_MASKABLE_INTERRUPTS_HI \
-       (~(INT_MASK_HI(INT_PERF_COUNT) | INT_MASK_HI(INT_AUX_PERF_COUNT)))
-#else
-#define LINUX_MASKABLE_INTERRUPTS_HI \
-       (~(INT_MASK_HI(INT_PERF_COUNT)))
-#endif
-
-#else
-
-#if CHIP_HAS_AUX_PERF_COUNTERS()
-#define LINUX_MASKABLE_INTERRUPTS \
-       (~(INT_MASK(INT_PERF_COUNT) | INT_MASK(INT_AUX_PERF_COUNT)))
-#else
 #define LINUX_MASKABLE_INTERRUPTS \
-       (~(INT_MASK(INT_PERF_COUNT)))
-#endif
+       (~((_AC(1,ULL) << INT_PERF_COUNT) | (_AC(1,ULL) << INT_AUX_PERF_COUNT)))
 
+#if CHIP_HAS_SPLIT_INTR_MASK()
+/* The same macro, but for the two 32-bit SPRs separately. */
+#define LINUX_MASKABLE_INTERRUPTS_LO (-1)
+#define LINUX_MASKABLE_INTERRUPTS_HI \
+       (~((1 << (INT_PERF_COUNT - 32)) | (1 << (INT_AUX_PERF_COUNT - 32))))
 #endif
 
 #ifndef __ASSEMBLY__
  * to know our current state.
  */
 DECLARE_PER_CPU(unsigned long long, interrupts_enabled_mask);
-#define INITIAL_INTERRUPTS_ENABLED INT_MASK(INT_MEM_ERROR)
+#define INITIAL_INTERRUPTS_ENABLED (1ULL << INT_MEM_ERROR)
 
 /* Disable interrupts. */
 #define arch_local_irq_disable() \
@@ -165,7 +153,7 @@ DECLARE_PER_CPU(unsigned long long, interrupts_enabled_mask);
 
 /* Prevent the given interrupt from being enabled next time we enable irqs. */
 #define arch_local_irq_mask(interrupt) \
-       (__get_cpu_var(interrupts_enabled_mask) &= ~INT_MASK(interrupt))
+       (__get_cpu_var(interrupts_enabled_mask) &= ~(1ULL << (interrupt)))
 
 /* Prevent the given interrupt from being enabled immediately. */
 #define arch_local_irq_mask_now(interrupt) do { \
@@ -175,7 +163,7 @@ DECLARE_PER_CPU(unsigned long long, interrupts_enabled_mask);
 
 /* Allow the given interrupt to be enabled next time we enable irqs. */
 #define arch_local_irq_unmask(interrupt) \
-       (__get_cpu_var(interrupts_enabled_mask) |= INT_MASK(interrupt))
+       (__get_cpu_var(interrupts_enabled_mask) |= (1ULL << (interrupt)))
 
 /* Allow the given interrupt to be enabled immediately, if !irqs_disabled. */
 #define arch_local_irq_unmask_now(interrupt) do { \
@@ -250,7 +238,7 @@ DECLARE_PER_CPU(unsigned long long, interrupts_enabled_mask);
 /* Disable interrupts. */
 #define IRQ_DISABLE(tmp0, tmp1)                                        \
        {                                                       \
-        movei  tmp0, -1;                                       \
+        movei  tmp0, LINUX_MASKABLE_INTERRUPTS_LO;             \
         moveli tmp1, lo16(LINUX_MASKABLE_INTERRUPTS_HI)        \
        };                                                      \
        {                                                       \
index 96b5710505b6897b98e9eeb9c6f9317173fd2b23..2efe3f68b2d6a80059acd078d53acea552cf4631 100644 (file)
@@ -15,6 +15,7 @@
 #ifndef __ARCH_INTERRUPTS_H__
 #define __ARCH_INTERRUPTS_H__
 
+#ifndef __KERNEL__
 /** Mask for an interrupt. */
 /* Note: must handle breaking interrupts into high and low words manually. */
 #define INT_MASK_LO(intno) (1 << (intno))
@@ -23,6 +24,7 @@
 #ifndef __ASSEMBLER__
 #define INT_MASK(intno) (1ULL << (intno))
 #endif
+#endif
 
 
 /** Where a given interrupt executes */
 
 #ifndef __ASSEMBLER__
 #define QUEUED_INTERRUPTS ( \
-    INT_MASK(INT_MEM_ERROR) | \
-    INT_MASK(INT_DMATLB_MISS) | \
-    INT_MASK(INT_DMATLB_ACCESS) | \
-    INT_MASK(INT_SNITLB_MISS) | \
-    INT_MASK(INT_SN_NOTIFY) | \
-    INT_MASK(INT_SN_FIREWALL) | \
-    INT_MASK(INT_IDN_FIREWALL) | \
-    INT_MASK(INT_UDN_FIREWALL) | \
-    INT_MASK(INT_TILE_TIMER) | \
-    INT_MASK(INT_IDN_TIMER) | \
-    INT_MASK(INT_UDN_TIMER) | \
-    INT_MASK(INT_DMA_NOTIFY) | \
-    INT_MASK(INT_IDN_CA) | \
-    INT_MASK(INT_UDN_CA) | \
-    INT_MASK(INT_IDN_AVAIL) | \
-    INT_MASK(INT_UDN_AVAIL) | \
-    INT_MASK(INT_PERF_COUNT) | \
-    INT_MASK(INT_INTCTRL_3) | \
-    INT_MASK(INT_INTCTRL_2) | \
-    INT_MASK(INT_INTCTRL_1) | \
-    INT_MASK(INT_INTCTRL_0) | \
-    INT_MASK(INT_BOOT_ACCESS) | \
-    INT_MASK(INT_WORLD_ACCESS) | \
-    INT_MASK(INT_I_ASID) | \
-    INT_MASK(INT_D_ASID) | \
-    INT_MASK(INT_DMA_ASID) | \
-    INT_MASK(INT_SNI_ASID) | \
-    INT_MASK(INT_DMA_CPL) | \
-    INT_MASK(INT_SN_CPL) | \
-    INT_MASK(INT_DOUBLE_FAULT) | \
-    INT_MASK(INT_AUX_PERF_COUNT) | \
+    (1ULL << INT_MEM_ERROR) | \
+    (1ULL << INT_DMATLB_MISS) | \
+    (1ULL << INT_DMATLB_ACCESS) | \
+    (1ULL << INT_SNITLB_MISS) | \
+    (1ULL << INT_SN_NOTIFY) | \
+    (1ULL << INT_SN_FIREWALL) | \
+    (1ULL << INT_IDN_FIREWALL) | \
+    (1ULL << INT_UDN_FIREWALL) | \
+    (1ULL << INT_TILE_TIMER) | \
+    (1ULL << INT_IDN_TIMER) | \
+    (1ULL << INT_UDN_TIMER) | \
+    (1ULL << INT_DMA_NOTIFY) | \
+    (1ULL << INT_IDN_CA) | \
+    (1ULL << INT_UDN_CA) | \
+    (1ULL << INT_IDN_AVAIL) | \
+    (1ULL << INT_UDN_AVAIL) | \
+    (1ULL << INT_PERF_COUNT) | \
+    (1ULL << INT_INTCTRL_3) | \
+    (1ULL << INT_INTCTRL_2) | \
+    (1ULL << INT_INTCTRL_1) | \
+    (1ULL << INT_INTCTRL_0) | \
+    (1ULL << INT_BOOT_ACCESS) | \
+    (1ULL << INT_WORLD_ACCESS) | \
+    (1ULL << INT_I_ASID) | \
+    (1ULL << INT_D_ASID) | \
+    (1ULL << INT_DMA_ASID) | \
+    (1ULL << INT_SNI_ASID) | \
+    (1ULL << INT_DMA_CPL) | \
+    (1ULL << INT_SN_CPL) | \
+    (1ULL << INT_DOUBLE_FAULT) | \
+    (1ULL << INT_AUX_PERF_COUNT) | \
     0)
 #define NONQUEUED_INTERRUPTS ( \
-    INT_MASK(INT_ITLB_MISS) | \
-    INT_MASK(INT_ILL) | \
-    INT_MASK(INT_GPV) | \
-    INT_MASK(INT_SN_ACCESS) | \
-    INT_MASK(INT_IDN_ACCESS) | \
-    INT_MASK(INT_UDN_ACCESS) | \
-    INT_MASK(INT_IDN_REFILL) | \
-    INT_MASK(INT_UDN_REFILL) | \
-    INT_MASK(INT_IDN_COMPLETE) | \
-    INT_MASK(INT_UDN_COMPLETE) | \
-    INT_MASK(INT_SWINT_3) | \
-    INT_MASK(INT_SWINT_2) | \
-    INT_MASK(INT_SWINT_1) | \
-    INT_MASK(INT_SWINT_0) | \
-    INT_MASK(INT_UNALIGN_DATA) | \
-    INT_MASK(INT_DTLB_MISS) | \
-    INT_MASK(INT_DTLB_ACCESS) | \
-    INT_MASK(INT_SN_STATIC_ACCESS) | \
+    (1ULL << INT_ITLB_MISS) | \
+    (1ULL << INT_ILL) | \
+    (1ULL << INT_GPV) | \
+    (1ULL << INT_SN_ACCESS) | \
+    (1ULL << INT_IDN_ACCESS) | \
+    (1ULL << INT_UDN_ACCESS) | \
+    (1ULL << INT_IDN_REFILL) | \
+    (1ULL << INT_UDN_REFILL) | \
+    (1ULL << INT_IDN_COMPLETE) | \
+    (1ULL << INT_UDN_COMPLETE) | \
+    (1ULL << INT_SWINT_3) | \
+    (1ULL << INT_SWINT_2) | \
+    (1ULL << INT_SWINT_1) | \
+    (1ULL << INT_SWINT_0) | \
+    (1ULL << INT_UNALIGN_DATA) | \
+    (1ULL << INT_DTLB_MISS) | \
+    (1ULL << INT_DTLB_ACCESS) | \
+    (1ULL << INT_SN_STATIC_ACCESS) | \
     0)
 #define CRITICAL_MASKED_INTERRUPTS ( \
-    INT_MASK(INT_MEM_ERROR) | \
-    INT_MASK(INT_DMATLB_MISS) | \
-    INT_MASK(INT_DMATLB_ACCESS) | \
-    INT_MASK(INT_SNITLB_MISS) | \
-    INT_MASK(INT_SN_NOTIFY) | \
-    INT_MASK(INT_SN_FIREWALL) | \
-    INT_MASK(INT_IDN_FIREWALL) | \
-    INT_MASK(INT_UDN_FIREWALL) | \
-    INT_MASK(INT_TILE_TIMER) | \
-    INT_MASK(INT_IDN_TIMER) | \
-    INT_MASK(INT_UDN_TIMER) | \
-    INT_MASK(INT_DMA_NOTIFY) | \
-    INT_MASK(INT_IDN_CA) | \
-    INT_MASK(INT_UDN_CA) | \
-    INT_MASK(INT_IDN_AVAIL) | \
-    INT_MASK(INT_UDN_AVAIL) | \
-    INT_MASK(INT_PERF_COUNT) | \
-    INT_MASK(INT_INTCTRL_3) | \
-    INT_MASK(INT_INTCTRL_2) | \
-    INT_MASK(INT_INTCTRL_1) | \
-    INT_MASK(INT_INTCTRL_0) | \
-    INT_MASK(INT_AUX_PERF_COUNT) | \
+    (1ULL << INT_MEM_ERROR) | \
+    (1ULL << INT_DMATLB_MISS) | \
+    (1ULL << INT_DMATLB_ACCESS) | \
+    (1ULL << INT_SNITLB_MISS) | \
+    (1ULL << INT_SN_NOTIFY) | \
+    (1ULL << INT_SN_FIREWALL) | \
+    (1ULL << INT_IDN_FIREWALL) | \
+    (1ULL << INT_UDN_FIREWALL) | \
+    (1ULL << INT_TILE_TIMER) | \
+    (1ULL << INT_IDN_TIMER) | \
+    (1ULL << INT_UDN_TIMER) | \
+    (1ULL << INT_DMA_NOTIFY) | \
+    (1ULL << INT_IDN_CA) | \
+    (1ULL << INT_UDN_CA) | \
+    (1ULL << INT_IDN_AVAIL) | \
+    (1ULL << INT_UDN_AVAIL) | \
+    (1ULL << INT_PERF_COUNT) | \
+    (1ULL << INT_INTCTRL_3) | \
+    (1ULL << INT_INTCTRL_2) | \
+    (1ULL << INT_INTCTRL_1) | \
+    (1ULL << INT_INTCTRL_0) | \
+    (1ULL << INT_AUX_PERF_COUNT) | \
     0)
 #define CRITICAL_UNMASKED_INTERRUPTS ( \
-    INT_MASK(INT_ITLB_MISS) | \
-    INT_MASK(INT_ILL) | \
-    INT_MASK(INT_GPV) | \
-    INT_MASK(INT_SN_ACCESS) | \
-    INT_MASK(INT_IDN_ACCESS) | \
-    INT_MASK(INT_UDN_ACCESS) | \
-    INT_MASK(INT_IDN_REFILL) | \
-    INT_MASK(INT_UDN_REFILL) | \
-    INT_MASK(INT_IDN_COMPLETE) | \
-    INT_MASK(INT_UDN_COMPLETE) | \
-    INT_MASK(INT_SWINT_3) | \
-    INT_MASK(INT_SWINT_2) | \
-    INT_MASK(INT_SWINT_1) | \
-    INT_MASK(INT_SWINT_0) | \
-    INT_MASK(INT_UNALIGN_DATA) | \
-    INT_MASK(INT_DTLB_MISS) | \
-    INT_MASK(INT_DTLB_ACCESS) | \
-    INT_MASK(INT_BOOT_ACCESS) | \
-    INT_MASK(INT_WORLD_ACCESS) | \
-    INT_MASK(INT_I_ASID) | \
-    INT_MASK(INT_D_ASID) | \
-    INT_MASK(INT_DMA_ASID) | \
-    INT_MASK(INT_SNI_ASID) | \
-    INT_MASK(INT_DMA_CPL) | \