]> git.openfabrics.org - ~shefty/rdma-dev.git/commitdiff
Merge branch 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
authorLinus Torvalds <torvalds@linux-foundation.org>
Mon, 8 Nov 2010 18:54:23 +0000 (10:54 -0800)
committerLinus Torvalds <torvalds@linux-foundation.org>
Mon, 8 Nov 2010 18:54:23 +0000 (10:54 -0800)
* 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  mmc: sh_mmcif: Convert extern inline to static inline.
  ARM: mach-shmobile: Allow GPIO chips to register IRQ mappings.
  ARM: mach-shmobile: fix sh7372 after a recent clock framework rework
  ARM: mach-shmobile: include drivers/sh/Kconfig
  ARM: mach-shmobile: ap4evb: Add HDMI sound support
  ARM: mach-shmobile: clock-sh7372: Add FSIDIV clock support
  ARM: shmobile: remove sh_timer_config clk member

53 files changed:
arch/sh/Kconfig
arch/sh/Makefile
arch/sh/boards/Kconfig
arch/sh/boards/Makefile
arch/sh/boards/board-edosk7705.c [new file with mode: 0644]
arch/sh/boards/board-secureedge5410.c [new file with mode: 0644]
arch/sh/boards/mach-edosk7705/Makefile [deleted file]
arch/sh/boards/mach-edosk7705/io.c [deleted file]
arch/sh/boards/mach-edosk7705/setup.c [deleted file]
arch/sh/boards/mach-microdev/io.c
arch/sh/boards/mach-microdev/setup.c
arch/sh/boards/mach-se/7206/Makefile
arch/sh/boards/mach-se/7206/io.c [deleted file]
arch/sh/boards/mach-se/7206/irq.c
arch/sh/boards/mach-se/7206/setup.c
arch/sh/boards/mach-se/770x/Makefile
arch/sh/boards/mach-se/770x/io.c [deleted file]
arch/sh/boards/mach-se/770x/setup.c
arch/sh/boards/mach-se/7751/Makefile
arch/sh/boards/mach-se/7751/io.c [deleted file]
arch/sh/boards/mach-se/7751/setup.c
arch/sh/boards/mach-snapgear/Makefile [deleted file]
arch/sh/boards/mach-snapgear/io.c [deleted file]
arch/sh/boards/mach-snapgear/setup.c [deleted file]
arch/sh/boards/mach-systemh/Makefile [deleted file]
arch/sh/boards/mach-systemh/io.c [deleted file]
arch/sh/boards/mach-systemh/irq.c [deleted file]
arch/sh/boards/mach-systemh/setup.c [deleted file]
arch/sh/configs/secureedge5410_defconfig [new file with mode: 0644]
arch/sh/configs/snapgear_defconfig [deleted file]
arch/sh/configs/systemh_defconfig [deleted file]
arch/sh/include/asm/addrspace.h
arch/sh/include/asm/pgtable.h
arch/sh/include/asm/system.h
arch/sh/include/asm/system_32.h
arch/sh/include/asm/system_64.h
arch/sh/include/asm/uncached.h
arch/sh/include/mach-common/mach/edosk7705.h [deleted file]
arch/sh/include/mach-common/mach/microdev.h
arch/sh/include/mach-common/mach/secureedge5410.h [new file with mode: 0644]
arch/sh/include/mach-common/mach/snapgear.h [deleted file]
arch/sh/include/mach-common/mach/systemh7751.h [deleted file]
arch/sh/kernel/cpu/sh4a/clock-sh7724.c
arch/sh/mm/Kconfig
arch/sh/mm/consistent.c
arch/sh/mm/uncached.c
arch/sh/tools/mach-types
drivers/block/floppy.c
drivers/rtc/rtc-ds1302.c
drivers/sh/clk/core.c
drivers/sh/intc/core.c
drivers/sh/intc/dynamic.c
include/linux/sh_clk.h

index 5c075f562ebae912476974f20faee1bfaeec707d..7f217b3a50a806b7347f991b588397011aa3388e 100644 (file)
@@ -193,6 +193,7 @@ config CPU_SH2
 config CPU_SH2A
        bool
        select CPU_SH2
+       select UNCACHED_MAPPING
 
 config CPU_SH3
        bool
index 307b3a4a790b98b61bd3cb893dfa155ff4983e0b..9c8c6e1a2a154d4dff50db8d0d532201c5f991be 100644 (file)
@@ -133,10 +133,7 @@ machdir-$(CONFIG_SOLUTION_ENGINE)          += mach-se
 machdir-$(CONFIG_SH_HP6XX)                     += mach-hp6xx
 machdir-$(CONFIG_SH_DREAMCAST)                 += mach-dreamcast
 machdir-$(CONFIG_SH_SH03)                      += mach-sh03
-machdir-$(CONFIG_SH_SECUREEDGE5410)            += mach-snapgear
 machdir-$(CONFIG_SH_RTS7751R2D)                        += mach-r2d
-machdir-$(CONFIG_SH_7751_SYSTEMH)              += mach-systemh
-machdir-$(CONFIG_SH_EDOSK7705)                 += mach-edosk7705
 machdir-$(CONFIG_SH_HIGHLANDER)                        += mach-highlander
 machdir-$(CONFIG_SH_MIGOR)                     += mach-migor
 machdir-$(CONFIG_SH_AP325RXA)                  += mach-ap325rxa
index 9c94711aa6caee785b152ba7be282b98a6b6d285..2018c7ea4c93f49d53d7f1ff82f32db2b85e85bc 100644 (file)
@@ -81,13 +81,6 @@ config SH_7343_SOLUTION_ENGINE
          Select 7343 SolutionEngine if configuring for a Hitachi
          SH7343 (SH-Mobile 3AS) evaluation board.
 
-config SH_7751_SYSTEMH
-       bool "SystemH7751R"
-       depends on CPU_SUBTYPE_SH7751R
-       help
-         Select SystemH if you are configuring for a Renesas SystemH
-         7751R evaluation board.
-
 config SH_HP6XX
        bool "HP6XX"
        select SYS_SUPPORTS_APM_EMULATION
index 38ef655cc0f08cfe0f881b053f421e9861412556..be7d11d04b26a3abcaeacde829e496f970903c33 100644 (file)
@@ -2,10 +2,12 @@
 # Specific board support, not covered by a mach group.
 #
 obj-$(CONFIG_SH_MAGIC_PANEL_R2)        += board-magicpanelr2.o
+obj-$(CONFIG_SH_SECUREEDGE5410)        += board-secureedge5410.o
 obj-$(CONFIG_SH_SH2007)                += board-sh2007.o
 obj-$(CONFIG_SH_SH7785LCR)     += board-sh7785lcr.o
 obj-$(CONFIG_SH_URQUELL)       += board-urquell.o
 obj-$(CONFIG_SH_SHMIN)         += board-shmin.o
+obj-$(CONFIG_SH_EDOSK7705)     += board-edosk7705.o
 obj-$(CONFIG_SH_EDOSK7760)     += board-edosk7760.o
 obj-$(CONFIG_SH_ESPT)          += board-espt.o
 obj-$(CONFIG_SH_POLARIS)       += board-polaris.o
diff --git a/arch/sh/boards/board-edosk7705.c b/arch/sh/boards/board-edosk7705.c
new file mode 100644 (file)
index 0000000..4cb3bb7
--- /dev/null
@@ -0,0 +1,78 @@
+/*
+ * arch/sh/boards/renesas/edosk7705/setup.c
+ *
+ * Copyright (C) 2000  Kazumoto Kojima
+ *
+ * Hitachi SolutionEngine Support.
+ *
+ * Modified for edosk7705 development
+ * board by S. Dunn, 2003.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/smc91x.h>
+#include <asm/machvec.h>
+#include <asm/sizes.h>
+
+#define SMC_IOBASE     0xA2000000
+#define SMC_IO_OFFSET  0x300
+#define SMC_IOADDR     (SMC_IOBASE + SMC_IO_OFFSET)
+
+#define ETHERNET_IRQ   0x09
+
+static void __init sh_edosk7705_init_irq(void)
+{
+       make_imask_irq(ETHERNET_IRQ);
+}
+
+/* eth initialization functions */
+static struct smc91x_platdata smc91x_info = {
+       .flags = SMC91X_USE_16BIT | SMC91X_IO_SHIFT_1 | IORESOURCE_IRQ_LOWLEVEL,
+};
+
+static struct resource smc91x_res[] = {
+       [0] = {
+               .start  = SMC_IOADDR,
+               .end    = SMC_IOADDR + SZ_32 - 1,
+               .flags  = IORESOURCE_MEM,
+       },
+       [1] = {
+               .start  = ETHERNET_IRQ,
+               .end    = ETHERNET_IRQ,
+               .flags  = IORESOURCE_IRQ ,
+       }
+};
+
+static struct platform_device smc91x_dev = {
+       .name           = "smc91x",
+       .id             = -1,
+       .num_resources  = ARRAY_SIZE(smc91x_res),
+       .resource       = smc91x_res,
+
+       .dev    = {
+               .platform_data  = &smc91x_info,
+       },
+};
+
+/* platform init code */
+static struct platform_device *edosk7705_devices[] __initdata = {
+       &smc91x_dev,
+};
+
+static int __init init_edosk7705_devices(void)
+{
+       return platform_add_devices(edosk7705_devices,
+                                   ARRAY_SIZE(edosk7705_devices));
+}
+__initcall(init_edosk7705_devices);
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_edosk7705 __initmv = {
+       .mv_name                = "EDOSK7705",
+       .mv_nr_irqs             = 80,
+       .mv_init_irq            = sh_edosk7705_init_irq,
+};
diff --git a/arch/sh/boards/board-secureedge5410.c b/arch/sh/boards/board-secureedge5410.c
new file mode 100644 (file)
index 0000000..32f875e
--- /dev/null
@@ -0,0 +1,79 @@
+/*
+ * Copyright (C) 2002  David McCullough <davidm@snapgear.com>
+ * Copyright (C) 2003  Paul Mundt <lethal@linux-sh.org>
+ *
+ * Based on files with the following comments:
+ *
+ *           Copyright (C) 2000  Kazumoto Kojima
+ *
+ *           Modified for 7751 Solution Engine by
+ *           Ian da Silva and Jeremy Siegel, 2001.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/timer.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <asm/machvec.h>
+#include <mach/secureedge5410.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <cpu/timer.h>
+
+unsigned short secureedge5410_ioport;
+
+/*
+ * EraseConfig handling functions
+ */
+static irqreturn_t eraseconfig_interrupt(int irq, void *dev_id)
+{
+       ctrl_delay();   /* dummy read */
+
+       printk("SnapGear: erase switch interrupt!\n");
+
+       return IRQ_HANDLED;
+}
+
+static int __init eraseconfig_init(void)
+{
+       unsigned int irq = evt2irq(0x240);
+
+       printk("SnapGear: EraseConfig init\n");
+
+       /* Setup "EraseConfig" switch on external IRQ 0 */
+       if (request_irq(irq, eraseconfig_interrupt, IRQF_DISABLED,
+                               "Erase Config", NULL))
+               printk("SnapGear: failed to register IRQ%d for Reset witch\n",
+                               irq);
+       else
+               printk("SnapGear: registered EraseConfig switch on IRQ%d\n",
+                               irq);
+       return 0;
+}
+module_init(eraseconfig_init);
+
+/*
+ * Initialize IRQ setting
+ *
+ * IRL0 = erase switch
+ * IRL1 = eth0
+ * IRL2 = eth1
+ * IRL3 = crypto
+ */
+static void __init init_snapgear_IRQ(void)
+{
+       printk("Setup SnapGear IRQ/IPR ...\n");
+       /* enable individual interrupt mode for externals */
+       plat_irq_setup_pins(IRQ_MODE_IRQ);
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_snapgear __initmv = {
+       .mv_name                = "SnapGear SecureEdge5410",
+       .mv_nr_irqs             = 72,
+       .mv_init_irq            = init_snapgear_IRQ,
+};
diff --git a/arch/sh/boards/mach-edosk7705/Makefile b/arch/sh/boards/mach-edosk7705/Makefile
deleted file mode 100644 (file)
index cd54acb..0000000
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the EDOSK7705 specific parts of the kernel
-#
-
-obj-y   := setup.o io.o
diff --git a/arch/sh/boards/mach-edosk7705/io.c b/arch/sh/boards/mach-edosk7705/io.c
deleted file mode 100644 (file)
index 5b9c57c..0000000
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * arch/sh/boards/renesas/edosk7705/io.c
- *
- * Copyright (C) 2001  Ian da Silva, Jeremy Siegel
- * Based largely on io_se.c.
- *
- * I/O routines for Hitachi EDOSK7705 board.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/io.h>
-#include <mach/edosk7705.h>
-#include <asm/addrspace.h>
-
-#define SMC_IOADDR     0xA2000000
-
-/* Map the Ethernet addresses as if it is at 0x300 - 0x320 */
-static unsigned long sh_edosk7705_isa_port2addr(unsigned long port)
-{
-       /*
-        * SMC91C96 registers are 4 byte aligned rather than the
-        * usual 2 byte!
-        */
-       if (port >= 0x300 && port < 0x320)
-               return SMC_IOADDR + ((port - 0x300) * 2);
-
-       maybebadio(port);
-       return port;
-}
-
-/* Trying to read / write bytes on odd-byte boundaries to the Ethernet
- * registers causes problems. So we bit-shift the value and read / write
- * in 2 byte chunks. Setting the low byte to 0 does not cause problems
- * now as odd byte writes are only made on the bit mask / interrupt
- * register. This may not be the case in future Mar-2003 SJD
- */
-unsigned char sh_edosk7705_inb(unsigned long port)
-{
-       if (port >= 0x300 && port < 0x320 && port & 0x01)
-               return __raw_readw(port - 1) >> 8;
-
-       return __raw_readb(sh_edosk7705_isa_port2addr(port));
-}
-
-void sh_edosk7705_outb(unsigned char value, unsigned long port)
-{
-       if (port >= 0x300 && port < 0x320 && port & 0x01) {
-               __raw_writew(((unsigned short)value << 8), port - 1);
-               return;
-       }
-
-       __raw_writeb(value, sh_edosk7705_isa_port2addr(port));
-}
-
-void sh_edosk7705_insb(unsigned long port, void *addr, unsigned long count)
-{
-       unsigned char *p = addr;
-
-       while (count--)
-               *p++ = sh_edosk7705_inb(port);
-}
-
-void sh_edosk7705_outsb(unsigned long port, const void *addr, unsigned long count)
-{
-       unsigned char *p = (unsigned char *)addr;
-
-       while (count--)
-               sh_edosk7705_outb(*p++, port);
-}
diff --git a/arch/sh/boards/mach-edosk7705/setup.c b/arch/sh/boards/mach-edosk7705/setup.c
deleted file mode 100644 (file)
index d59225e..0000000
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * arch/sh/boards/renesas/edosk7705/setup.c
- *
- * Copyright (C) 2000  Kazumoto Kojima
- *
- * Hitachi SolutionEngine Support.
- *
- * Modified for edosk7705 development
- * board by S. Dunn, 2003.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <asm/machvec.h>
-#include <mach/edosk7705.h>
-
-static void __init sh_edosk7705_init_irq(void)
-{
-       /* This is the Ethernet interrupt */
-       make_imask_irq(0x09);
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_edosk7705 __initmv = {
-       .mv_name                = "EDOSK7705",
-       .mv_nr_irqs             = 80,
-
-       .mv_inb                 = sh_edosk7705_inb,
-       .mv_outb                = sh_edosk7705_outb,
-
-       .mv_insb                = sh_edosk7705_insb,
-       .mv_outsb               = sh_edosk7705_outsb,
-
-       .mv_init_irq            = sh_edosk7705_init_irq,
-};
index 2960c659020ee92e6c60c5c1d16d8d05ab73e267..acdafb0c6404a153cc482e46c0a17287f15ea26e 100644 (file)
@@ -54,7 +54,7 @@
 /*
  * map I/O ports to memory-mapped addresses
  */
-static unsigned long microdev_isa_port2addr(unsigned long offset)
+void __iomem *microdev_ioport_map(unsigned long offset, unsigned int len)
 {
        unsigned long result;
 
@@ -72,16 +72,6 @@ static unsigned long microdev_isa_port2addr(unsigned long offset)
                         *      Configuration Registers
                         */
                result = IO_SUPERIO_PHYS + (offset << 1);
-#if 0
-       } else if (offset == KBD_DATA_REG || offset == KBD_CNTL_REG ||
-                  offset == KBD_STATUS_REG) {
-                       /*
-                        *      SMSC FDC37C93xAPM SuperIO chip
-                        *
-                        *      PS/2 Keyboard + Mouse (ports 0x60 and 0x64).
-                        */
-               result = IO_SUPERIO_PHYS + (offset << 1);
-#endif
        } else if (((offset >= IO_IDE1_BASE) &&
                    (offset <  IO_IDE1_BASE + IO_IDE_EXTENT)) ||
                    (offset == IO_IDE1_MISC)) {
@@ -131,237 +121,5 @@ static unsigned long microdev_isa_port2addr(unsigned long offset)
                result = PVR;
        }
 
-       return result;
-}
-
-#define PORT2ADDR(x) (microdev_isa_port2addr(x))
-
-static inline void delay(void)
-{
-#if defined(CONFIG_PCI)
-       /* System board present, just make a dummy SRAM access.  (CS0 will be
-          mapped to PCI memory, probably good to avoid it.) */
-       __raw_readw(0xa6800000);
-#else
-       /* CS0 will be mapped to flash, ROM etc so safe to access it. */
-       __raw_readw(0xa0000000);
-#endif
-}
-
-unsigned char microdev_inb(unsigned long port)
-{
-#ifdef CONFIG_PCI
-       if (port >= PCIBIOS_MIN_IO)
-               return microdev_pci_inb(port);
-#endif
-       return *(volatile unsigned char*)PORT2ADDR(port);
-}
-
-unsigned short microdev_inw(unsigned long port)
-{
-#ifdef CONFIG_PCI
-       if (port >= PCIBIOS_MIN_IO)
-               return microdev_pci_inw(port);
-#endif
-       return *(volatile unsigned short*)PORT2ADDR(port);
-}
-
-unsigned int microdev_inl(unsigned long port)
-{
-#ifdef CONFIG_PCI
-       if (port >= PCIBIOS_MIN_IO)
-               return microdev_pci_inl(port);
-#endif
-       return *(volatile unsigned int*)PORT2ADDR(port);
-}
-
-void microdev_outw(unsigned short b, unsigned long port)
-{
-#ifdef CONFIG_PCI
-       if (port >= PCIBIOS_MIN_IO) {
-               microdev_pci_outw(b, port);
-               return;
-       }
-#endif
-       *(volatile unsigned short*)PORT2ADDR(port) = b;
-}
-
-void microdev_outb(unsigned char b, unsigned long port)
-{
-#ifdef CONFIG_PCI
-       if (port >= PCIBIOS_MIN_IO) {
-               microdev_pci_outb(b, port);
-               return;
-       }
-#endif
-
-       /*
-        *      There is a board feature with the current SH4-202 MicroDev in
-        *      that the 2 byte enables (nBE0 and nBE1) are tied together (and
-        *      to the Chip Select Line (Ethernet_CS)). Due to this connectivity,
-        *      it is not possible to safely perform 8-bit writes to the
-        *      Ethernet registers, as 16-bits will be consumed from the Data
-        *      lines (corrupting the other byte).  Hence, this function is
-        *      written to implement 16-bit read/modify/write for all byte-wide
-        *      accesses.
-        *
-        *      Note: there is no problem with byte READS (even or odd).
-        *
-        *                      Sean McGoogan - 16th June 2003.
-        */
-       if ((port >= IO_LAN91C111_BASE) &&
-           (port <  IO_LAN91C111_BASE + IO_LAN91C111_EXTENT)) {
-                       /*
-                        * Then are trying to perform a byte-write to the
-                        * LAN91C111.  This needs special care.
-                        */
-               if (port % 2 == 1) {    /* is the port odd ? */
-                       /* unset bit-0, i.e. make even */
-                       const unsigned long evenPort = port-1;
-                       unsigned short word;
-
-                       /*
-                        * do a 16-bit read/write to write to 'port',
-                        * preserving even byte.
-                        *
-                        *      Even addresses are bits 0-7
-                        *      Odd  addresses are bits 8-15
-                        */
-                       word = microdev_inw(evenPort);
-                       word = (word & 0xffu) | (b << 8);
-                       microdev_outw(word, evenPort);
-               } else {
-                       /* else, we are trying to do an even byte write */
-                       unsigned short word;
-
-                       /*
-                        * do a 16-bit read/write to write to 'port',
-                        * preserving odd byte.
-                        *
-                        *      Even addresses are bits 0-7
-                        *      Odd  addresses are bits 8-15
-                        */
-                       word = microdev_inw(port);
-                       word = (word & 0xff00u) | (b);
-                       microdev_outw(word, port);
-               }
-       } else {
-               *(volatile unsigned char*)PORT2ADDR(port) = b;
-       }
-}
-
-void microdev_outl(unsigned int b, unsigned long port)
-{
-#ifdef CONFIG_PCI
-       if (port >= PCIBIOS_MIN_IO) {
-               microdev_pci_outl(b, port);
-               return;
-       }
-#endif
-       *(volatile unsigned int*)PORT2ADDR(port) = b;
-}
-
-unsigned char microdev_inb_p(unsigned long port)
-{
-       unsigned char v = microdev_inb(port);
-       delay();
-       return v;
-}
-
-unsigned short microdev_inw_p(unsigned long port)
-{
-       unsigned short v = microdev_inw(port);
-       delay();
-       return v;
-}
-
-unsigned int microdev_inl_p(unsigned long port)
-{
-       unsigned int v = microdev_inl(port);
-       delay();
-       return v;
-}
-
-void microdev_outb_p(unsigned char b, unsigned long port)
-{
-       microdev_outb(b, port);
-       delay();
-}
-
-void microdev_outw_p(unsigned short b, unsigned long port)
-{
-       microdev_outw(b, port);
-       delay();
-}
-
-void microdev_outl_p(unsigned int b, unsigned long port)
-{
-       microdev_outl(b, port);
-       delay();
-}
-
-void microdev_insb(unsigned long port, void *buffer, unsigned long count)
-{
-       volatile unsigned char *port_addr;
-       unsigned char *buf = buffer;
-
-       port_addr = (volatile unsigned char *)PORT2ADDR(port);
-
-       while (count--)
-               *buf++ = *port_addr;
-}
-
-void microdev_insw(unsigned long port, void *buffer, unsigned long count)
-{
-       volatile unsigned short *port_addr;
-       unsigned short *buf = buffer;
-
-       port_addr = (volatile unsigned short *)PORT2ADDR(port);
-
-       while (count--)
-               *buf++ = *port_addr;
-}
-
-void microdev_insl(unsigned long port, void *buffer, unsigned long count)
-{
-       volatile unsigned long *port_addr;
-       unsigned int *buf = buffer;
-
-       port_addr = (volatile unsigned long *)PORT2ADDR(port);
-
-       while (count--)
-               *buf++ = *port_addr;
-}
-
-void microdev_outsb(unsigned long port, const void *buffer, unsigned long count)
-{
-       volatile unsigned char *port_addr;
-       const unsigned char *buf = buffer;
-
-       port_addr = (volatile unsigned char *)PORT2ADDR(port);
-
-       while (count--)
-               *port_addr = *buf++;
-}
-
-void microdev_outsw(unsigned long port, const void *buffer, unsigned long count)
-{
-       volatile unsigned short *port_addr;
-       const unsigned short *buf = buffer;
-
-       port_addr = (volatile unsigned short *)PORT2ADDR(port);
-
-       while (count--)
-               *port_addr = *buf++;
-}
-
-void microdev_outsl(unsigned long port, const void *buffer, unsigned long count)
-{
-       volatile unsigned long *port_addr;
-       const unsigned int *buf = buffer;
-
-       port_addr = (volatile unsigned long *)PORT2ADDR(port);
-
-       while (count--)
-               *port_addr = *buf++;
+       return (void __iomem *)result;
 }
index d1df2a4fb9b885913d38a90c49ff44f7bb0ace50..d8a747291e03ed82a829e20e4e779013881f1197 100644 (file)
@@ -195,27 +195,6 @@ device_initcall(microdev_devices_setup);
 static struct sh_machine_vector mv_sh4202_microdev __initmv = {
        .mv_name                = "SH4-202 MicroDev",
        .mv_nr_irqs             = 72,
-
-       .mv_inb                 = microdev_inb,
-       .mv_inw                 = microdev_inw,
-       .mv_inl                 = microdev_inl,
-       .mv_outb                = microdev_outb,
-       .mv_outw                = microdev_outw,
-       .mv_outl                = microdev_outl,
-
-       .mv_inb_p               = microdev_inb_p,
-       .mv_inw_p               = microdev_inw_p,
-       .mv_inl_p               = microdev_inl_p,
-       .mv_outb_p              = microdev_outb_p,
-       .mv_outw_p              = microdev_outw_p,
-       .mv_outl_p              = microdev_outl_p,
-
-       .mv_insb                = microdev_insb,
-       .mv_insw                = microdev_insw,
-       .mv_insl                = microdev_insl,
-       .mv_outsb               = microdev_outsb,
-       .mv_outsw               = microdev_outsw,
-       .mv_outsl               = microdev_outsl,
-
+       .mv_ioport_map          = microdev_ioport_map,
        .mv_init_irq            = init_microdev_irq,
 };
index 63e7ed699f39b3c41d8578daa8b57ce31807c689..5c9eaa0535b935c5f90bde958b0ca79724e1dcc2 100644 (file)
@@ -2,4 +2,4 @@
 # Makefile for the 7206 SolutionEngine specific parts of the kernel
 #
 
-obj-y   := setup.o io.o irq.o
+obj-y   := setup.o irq.o
diff --git a/arch/sh/boards/mach-se/7206/io.c b/arch/sh/boards/mach-se/7206/io.c
deleted file mode 100644 (file)
index adadc77..0000000
+++ /dev/null
@@ -1,104 +0,0 @@
-/* $Id: io.c,v 1.5 2004/02/22 23:08:43 kkojima Exp $
- *
- * linux/arch/sh/boards/se/7206/io.c
- *
- * Copyright (C) 2006 Yoshinori Sato
- *
- * I/O routine for Hitachi 7206 SolutionEngine.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <asm/io.h>
-#include <mach-se/mach/se7206.h>
-
-
-static inline void delay(void)
-{
-       __raw_readw(0x20000000);  /* P2 ROM Area */
-}
-
-/* MS7750 requires special versions of in*, out* routines, since
-   PC-like io ports are located at upper half byte of 16-bit word which
-   can be accessed only with 16-bit wide.  */
-
-static inline volatile __u16 *
-port2adr(unsigned int port)
-{
-       if (port >= 0x2000 && port < 0x2020)
-               return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
-       else if (port >= 0x300 && port < 0x310)
-               return (volatile __u16 *) (PA_SMSC + (port - 0x300));
-
-       return (volatile __u16 *)port;
-}
-
-unsigned char se7206_inb(unsigned long port)
-{
-       return (*port2adr(port)) & 0xff;
-}
-
-unsigned char se7206_inb_p(unsigned long port)
-{
-       unsigned long v;
-
-       v = (*port2adr(port)) & 0xff;
-       delay();
-       return v;
-}
-
-unsigned short se7206_inw(unsigned long port)
-{
-       return *port2adr(port);
-}
-
-void se7206_outb(unsigned char value, unsigned long port)
-{
-       *(port2adr(port)) = value;
-}
-
-void se7206_outb_p(unsigned char value, unsigned long port)
-{
-       *(port2adr(port)) = value;
-       delay();
-}
-
-void se7206_outw(unsigned short value, unsigned long port)
-{
-       *port2adr(port) = value;
-}
-
-void se7206_insb(unsigned long port, void *addr, unsigned long count)
-{
-       volatile __u16 *p = port2adr(port);
-       __u8 *ap = addr;
-
-       while (count--)
-               *ap++ = *p;
-}
-
-void se7206_insw(unsigned long port, void *addr, unsigned long count)
-{
-       volatile __u16 *p = port2adr(port);
-       __u16 *ap = addr;
-       while (count--)
-               *ap++ = *p;
-}
-
-void se7206_outsb(unsigned long port, const void *addr, unsigned long count)
-{
-       volatile __u16 *p = port2adr(port);
-       const __u8 *ap = addr;
-
-       while (count--)
-               *p = *ap++;
-}
-
-void se7206_outsw(unsigned long port, const void *addr, unsigned long count)
-{
-       volatile __u16 *p = port2adr(port);
-       const __u16 *ap = addr;
-       while (count--)
-               *p = *ap++;
-}
index 883b21eacaa686d00efbf822911dac79e6e220d5..d961949600fd462199f3d9706e86371e815e7b1b 100644 (file)
@@ -139,11 +139,13 @@ void __init init_se7206_IRQ(void)
        make_se7206_irq(IRQ0_IRQ); /* SMC91C111 */
        make_se7206_irq(IRQ1_IRQ); /* ATA */
        make_se7206_irq(IRQ3_IRQ); /* SLOT / PCM */
-       __raw_writew(inw(INTC_ICR1) | 0x000b ,INTC_ICR1 ) ; /* ICR1 */
+
+       __raw_writew(__raw_readw(INTC_ICR1) | 0x000b, INTC_ICR); /* ICR1 */
 
        /* FPGA System register setup*/
        __raw_writew(0x0000,INTSTS0); /* Clear INTSTS0 */
        __raw_writew(0x0000,INTSTS1); /* Clear INTSTS1 */
+
        /* IRQ0=LAN, IRQ1=ATA, IRQ3=SLT,PCM */
        __raw_writew(0x0001,INTSEL);
 }
index 8f5c65d43d1d85a6e1db054cd5f065ee3aa72119..7f4871c71a01813dbd11882d9c55469d46359ce0 100644 (file)
@@ -86,20 +86,5 @@ __initcall(se7206_devices_setup);
 static struct sh_machine_vector mv_se __initmv = {
        .mv_name                = "SolutionEngine",
        .mv_nr_irqs             = 256,
-       .mv_inb                 = se7206_inb,
-       .mv_inw                 = se7206_inw,
-       .mv_outb                = se7206_outb,
-       .mv_outw                = se7206_outw,
-
-       .mv_inb_p               = se7206_inb_p,
-       .mv_inw_p               = se7206_inw,
-       .mv_outb_p              = se7206_outb_p,
-       .mv_outw_p              = se7206_outw,
-
-       .mv_insb                = se7206_insb,
-       .mv_insw                = se7206_insw,
-       .mv_outsb               = se7206_outsb,
-       .mv_outsw               = se7206_outsw,
-
        .mv_init_irq            = init_se7206_IRQ,
 };
index 8e624b06d5ea67efc746ecab0716485d9a4742bc..43ea14feef51094d032c5b7eec98b35deff925f8 100644 (file)
@@ -2,4 +2,4 @@
 # Makefile for the 770x SolutionEngine specific parts of the kernel
 #
 
-obj-y   := setup.o io.o irq.o
+obj-y   := setup.o irq.o
diff --git a/arch/sh/boards/mach-se/770x/io.c b/arch/sh/boards/mach-se/770x/io.c
deleted file mode 100644 (file)
index 28833c8..0000000
+++ /dev/null
@@ -1,156 +0,0 @@
-/*
- * Copyright (C) 2000  Kazumoto Kojima
- *
- * I/O routine for Hitachi SolutionEngine.
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <asm/io.h>
-#include <mach-se/mach/se.h>
-
-/* MS7750 requires special versions of in*, out* routines, since
-   PC-like io ports are located at upper half byte of 16-bit word which
-   can be accessed only with 16-bit wide.  */
-
-static inline volatile __u16 *
-port2adr(unsigned int port)
-{
-       if (port & 0xff000000)
-               return ( volatile __u16 *) port;
-       if (port >= 0x2000)
-               return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
-       else if (port >= 0x1000)
-               return (volatile __u16 *) (PA_83902 + (port << 1));
-       else
-               return (volatile __u16 *) (PA_SUPERIO + (port << 1));
-}
-
-static inline int
-shifted_port(unsigned long port)
-{
-       /* For IDE registers, value is not shifted */
-       if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6)
-               return 0;
-       else
-               return 1;
-}
-
-unsigned char se_inb(unsigned long port)
-{
-       if (shifted_port(port))
-               return (*port2adr(port) >> 8);
-       else
-               return (*port2adr(port))&0xff;
-}
-
-unsigned char se_inb_p(unsigned long port)
-{
-       unsigned long v;
-
-       if (shifted_port(port))
-               v = (*port2adr(port) >> 8);
-       else
-               v = (*port2adr(port))&0xff;
-       ctrl_delay();
-       return v;
-}
-
-unsigned short se_inw(unsigned long port)
-{
-       if (port >= 0x2000)
-               return *port2adr(port);
-       else
-               maybebadio(port);
-       return 0;
-}
-
-unsigned int se_inl(unsigned long port)
-{
-       maybebadio(port);
-       return 0;
-}
-
-void se_outb(unsigned char value, unsigned long port)
-{
-       if (shifted_port(port))
-               *(port2adr(port)) = value << 8;
-       else
-               *(port2adr(port)) = value;
-}
-
-void se_outb_p(unsigned char value, unsigned long port)
-{
-       if (shifted_port(port))
-               *(port2adr(port)) = value << 8;
-       else
-               *(port2adr(port)) = value;
-       ctrl_delay();
-}
-
-void se_outw(unsigned short value, unsigned long port)
-{
-       if (port >= 0x2000)
-               *port2adr(port) = value;
-       else
-               maybebadio(port);
-}
-
-void se_outl(unsigned int value, unsigned long port)
-{
-       maybebadio(port);
-}
-
-void se_insb(unsigned long port, void *addr, unsigned long count)
-{
-       volatile __u16 *p = port2adr(port);
-       __u8 *ap = addr;
-
-       if (shifted_port(port)) {
-               while (count--)
-                       *ap++ = *p >> 8;
-       } else {
-               while (count--)
-                       *ap++ = *p;
-       }
-}
-
-void se_insw(unsigned long port, void *addr, unsigned long count)
-{
-       volatile __u16 *p = port2adr(port);
-       __u16 *ap = addr;
-       while (count--)
-               *ap++ = *p;
-}
-
-void se_insl(unsigned long port, void *addr, unsigned long count)
-{
-       maybebadio(port);
-}
-
-void se_outsb(unsigned long port, const void *addr, unsigned long count)
-{
-       volatile __u16 *p = port2adr(port);
-       const __u8 *ap = addr;
-
-       if (shifted_port(port)) {
-               while (count--)
-                       *p = *ap++ << 8;
-       } else {
-               while (count--)
-                       *p = *ap++;
-       }
-}
-
-void se_outsw(unsigned long port, const void *addr, unsigned long count)
-{
-       volatile __u16 *p = port2adr(port);
-       const __u16 *ap = addr;
-
-       while (count--)
-               *p = *ap++;
-}
-
-void se_outsl(unsigned long port, const void *addr, unsigned long count)
-{
-       maybebadio(port);
-}
index 66d39d1b0901de5a9b6da4c7fb7978223b18b502..31330c65c0cec9aa1b78abb69e5bcb95c9c4cd80 100644 (file)
@@ -195,27 +195,5 @@ static struct sh_machine_vector mv_se __initmv = {
 #elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
        .mv_nr_irqs             = 104,
 #endif
-
-       .mv_inb                 = se_inb,
-       .mv_inw                 = se_inw,
-       .mv_inl                 = se_inl,
-       .mv_outb                = se_outb,
-       .mv_outw                = se_outw,
-       .mv_outl                = se_outl,
-
-       .mv_inb_p               = se_inb_p,
-       .mv_inw_p               = se_inw,
-       .mv_inl_p               = se_inl,
-       .mv_outb_p              = se_outb_p,
-       .mv_outw_p              = se_outw,
-       .mv_outl_p              = se_outl,
-
-       .mv_insb                = se_insb,
-       .mv_insw                = se_insw,
-       .mv_insl                = se_insl,
-       .mv_outsb               = se_outsb,
-       .mv_outsw               = se_outsw,
-       .mv_outsl               = se_outsl,
-
        .mv_init_irq            = init_se_IRQ,
 };
index e6f4341bfe6eaa0467e60dfb56ae08688ea5a9c0..a338fd9d503944f84b4e84b5a3a3e7cccc4a5fcb 100644 (file)
@@ -2,4 +2,4 @@
 # Makefile for the 7751 SolutionEngine specific parts of the kernel
 #
 
-obj-y   := setup.o io.o irq.o
+obj-y   := setup.o irq.o
diff --git a/arch/sh/boards/mach-se/7751/io.c b/arch/sh/boards/mach-se/7751/io.c
deleted file mode 100644 (file)
index 6e75bd4..0000000
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * Copyright (C) 2001  Ian da Silva, Jeremy Siegel
- * Based largely on io_se.c.
- *
- * I/O routine for Hitachi 7751 SolutionEngine.
- *
- * Initial version only to support LAN access; some
- * placeholder code from io_se.c left in with the
- * expectation of later SuperIO and PCMCIA access.
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <asm/io.h>
-#include <mach-se/mach/se7751.h>
-#include <asm/addrspace.h>
-
-static inline volatile u16 *port2adr(unsigned int port)
-{
-       if (port >= 0x2000)
-               return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
-       maybebadio((unsigned long)port);
-       return (volatile __u16*)port;
-}
-
-/*
- * General outline: remap really low stuff [eventually] to SuperIO,
- * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO)
- * is mapped through the PCI IO window.  Stuff with high bits (PXSEG)
- * should be way beyond the window, and is used  w/o translation for
- * compatibility.
- */
-unsigned char sh7751se_inb(unsigned long port)
-{
-       if (PXSEG(port))
-               return *(volatile unsigned char *)port;
-       else
-               return (*port2adr(port)) & 0xff;
-}
-
-unsigned char sh7751se_inb_p(unsigned long port)
-{
-       unsigned char v;
-
-        if (PXSEG(port))
-                v = *(volatile unsigned char *)port;
-       else
-               v = (*port2adr(port)) & 0xff;
-       ctrl_delay();
-       return v;
-}
-
-unsigned short sh7751se_inw(unsigned long port)
-{
-        if (PXSEG(port))
-                return *(volatile unsigned short *)port;
-       else if (port >= 0x2000)
-               return *port2adr(port);
-       else
-               maybebadio(port);
-       return 0;
-}
-
-unsigned int sh7751se_inl(unsigned long port)
-{
-        if (PXSEG(port))
-                return *(volatile unsigned long *)port;
-       else if (port >= 0x2000)
-               return *port2adr(port);
-       else
-               maybebadio(port);
-       return 0;
-}
-
-void sh7751se_outb(unsigned char value, unsigned long port)
-{
-
-        if (PXSEG(port))
-                *(volatile unsigned char *)port = value;
-       else
-               *(port2adr(port)) = value;
-}
-
-void sh7751se_outb_p(unsigned char value, unsigned long port)
-{
-        if (PXSEG(port))
-                *(volatile unsigned char *)port = value;
-       else
-               *(port2adr(port)) = value;
-       ctrl_delay();
-}
-
-void sh7751se_outw(unsigned short value, unsigned long port)
-{
-        if (PXSEG(port))
-                *(volatile unsigned short *)port = value;
-       else if (port >= 0x2000)
-               *port2adr(port) = value;
-       else
-               maybebadio(port);
-}
-
-void sh7751se_outl(unsigned int value, unsigned long port)
-{
-        if (PXSEG(port))
-                *(volatile unsigned long *)port = value;
-       else
-               maybebadio(port);
-}
-
-void sh7751se_insl(unsigned long port, void *addr, unsigned long count)
-{
-       maybebadio(port);
-}
-
-void sh7751se_outsl(unsigned long port, const void *addr, unsigned long count)
-{
-       maybebadio(port);
-}
index 50572512e3e84a6db630114a57415153fd4e0506..9fbc51beb1812dfafd10a91cf7b6c02c1cabfdce 100644 (file)
@@ -56,23 +56,5 @@ __initcall(se7751_devices_setup);
 static struct sh_machine_vector mv_7751se __initmv = {
        .mv_name                = "7751 SolutionEngine",
        .mv_nr_irqs             = 72,
-
-       .mv_inb                 = sh7751se_inb,
-       .mv_inw                 = sh7751se_inw,
-       .mv_inl                 = sh7751se_inl,
-       .mv_outb                = sh7751se_outb,
-       .mv_outw                = sh7751se_outw,
-       .mv_outl                = sh7751se_outl,
-
-       .mv_inb_p               = sh7751se_inb_p,
-       .mv_inw_p               = sh7751se_inw,
-       .mv_inl_p               = sh7751se_inl,
-       .mv_outb_p              = sh7751se_outb_p,
-       .mv_outw_p              = sh7751se_outw,
-       .mv_outl_p              = sh7751se_outl,
-
-       .mv_insl                = sh7751se_insl,
-       .mv_outsl               = sh7751se_outsl,
-
        .mv_init_irq            = init_7751se_IRQ,
 };
diff --git a/arch/sh/boards/mach-snapgear/Makefile b/arch/sh/boards/mach-snapgear/Makefile
deleted file mode 100644 (file)
index d2d2f4b..0000000
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the SnapGear specific parts of the kernel
-#
-
-obj-y   := setup.o io.o
diff --git a/arch/sh/boards/mach-snapgear/io.c b/arch/sh/boards/mach-snapgear/io.c
deleted file mode 100644 (file)
index 476650e..0000000
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * Copyright (C) 2002  David McCullough <davidm@snapgear.com>
- * Copyright (C) 2001  Ian da Silva, Jeremy Siegel
- * Based largely on io_se.c.
- *
- * I/O routine for Hitachi 7751 SolutionEngine.
- *
- * Initial version only to support LAN access; some
- * placeholder code from io_se.c left in with the
- * expectation of later SuperIO and PCMCIA access.
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <asm/io.h>
-#include <asm/addrspace.h>
-
-#ifdef CONFIG_SH_SECUREEDGE5410
-unsigned short secureedge5410_ioport;
-#endif
-
-static inline volatile __u16 *port2adr(unsigned int port)
-{
-       maybebadio((unsigned long)port);
-       return (volatile __u16*)port;
-}
-
-/*
- * General outline: remap really low stuff [eventually] to SuperIO,
- * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO)
- * is mapped through the PCI IO window.  Stuff with high bits (PXSEG)
- * should be way beyond the window, and is used  w/o translation for
- * compatibility.
- */
-unsigned char snapgear_inb(unsigned long port)
-{
-       if (PXSEG(port))
-               return *(volatile unsigned char *)port;
-       else
-               return (*port2adr(port)) & 0xff;
-}
-
-unsigned char snapgear_inb_p(unsigned long port)
-{
-       unsigned char v;
-
-       if (PXSEG(port))
-               v = *(volatile unsigned char *)port;
-       else
-               v = (*port2adr(port))&0xff;
-       ctrl_delay();
-       return v;
-}
-
-unsigned short snapgear_inw(unsigned long port)
-{
-       if (PXSEG(port))
-               return *(volatile unsigned short *)port;
-       else if (port >= 0x2000)
-               return *port2adr(port);
-       else
-               maybebadio(port);
-       return 0;
-}
-
-unsigned int snapgear_inl(unsigned long port)
-{
-       if (PXSEG(port))
-               return *(volatile unsigned long *)port;
-       else if (port >= 0x2000)
-               return *port2adr(port);
-       else
-               maybebadio(port);
-       return 0;
-}
-
-void snapgear_outb(unsigned char value, unsigned long port)
-{
-
-       if (PXSEG(port))
-               *(volatile unsigned char *)port = value;
-       else
-               *(port2adr(port)) = value;
-}
-
-void snapgear_outb_p(unsigned char value, unsigned long port)
-{
-       if (PXSEG(port))
-               *(volatile unsigned char *)port = value;
-       else
-               *(port2adr(port)) = value;
-       ctrl_delay();
-}
-
-void snapgear_outw(unsigned short value, unsigned long port)
-{
-       if (PXSEG(port))
-               *(volatile unsigned short *)port = value;
-       else if (port >= 0x2000)
-               *port2adr(port) = value;
-       else
-               maybebadio(port);
-}
-
-void snapgear_outl(unsigned int value, unsigned long port)
-{
-       if (PXSEG(port))
-               *(volatile unsigned long *)port = value;
-       else
-               maybebadio(port);
-}
-
-void snapgear_insl(unsigned long port, void *addr, unsigned long count)
-{
-       maybebadio(port);
-}
-
-void snapgear_outsl(unsigned long port, const void *addr, unsigned long count)
-{
-       maybebadio(port);
-}
diff --git a/arch/sh/boards/mach-snapgear/setup.c b/arch/sh/boards/mach-snapgear/setup.c
deleted file mode 100644 (file)
index 331745d..0000000
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * linux/arch/sh/boards/snapgear/setup.c
- *
- * Copyright (C) 2002  David McCullough <davidm@snapgear.com>
- * Copyright (C) 2003  Paul Mundt <lethal@linux-sh.org>
- *
- * Based on files with the following comments:
- *
- *           Copyright (C) 2000  Kazumoto Kojima
- *
- *           Modified for 7751 Solution Engine by
- *           Ian da Silva and Jeremy Siegel, 2001.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/timer.h>
-#include <linux/delay.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <asm/machvec.h>
-#include <mach/snapgear.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <cpu/timer.h>
-
-/*
- * EraseConfig handling functions
- */
-
-static irqreturn_t eraseconfig_interrupt(int irq, void *dev_id)
-{
-       (void)__raw_readb(0xb8000000);  /* dummy read */
-
-       printk("SnapGear: erase switch interrupt!\n");
-
-       return IRQ_HANDLED;
-}
-
-static int __init eraseconfig_init(void)
-{
-       printk("SnapGear: EraseConfig init\n");
-       /* Setup "EraseConfig" switch on external IRQ 0 */
-       if (request_irq(IRL0_IRQ, eraseconfig_interrupt, IRQF_DISABLED,
-                               "Erase Config", NULL))
-               printk("SnapGear: failed to register IRQ%d for Reset witch\n",
-                               IRL0_IRQ);
-       else
-               printk("SnapGear: registered EraseConfig switch on IRQ%d\n",
-                               IRL0_IRQ);
-       return(0);
-}
-
-module_init(eraseconfig_init);
-
-/****************************************************************************/
-/*
- * Initialize IRQ setting
- *
- * IRL0 = erase switch
- * IRL1 = eth0
- * IRL2 = eth1
- * IRL3 = crypto
- */
-
-static void __init init_snapgear_IRQ(void)
-{
-       printk("Setup SnapGear IRQ/IPR ...\n");
-       /* enable individual interrupt mode for externals */
-       plat_irq_setup_pins(IRQ_MODE_IRQ);
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_snapgear __initmv = {
-       .mv_name                = "SnapGear SecureEdge5410",
-       .mv_nr_irqs             = 72,
-
-       .mv_inb                 = snapgear_inb,
-       .mv_inw                 = snapgear_inw,
-       .mv_inl                 = snapgear_inl,
-       .mv_outb                = snapgear_outb,
-       .mv_outw                = snapgear_outw,
-       .mv_outl                = snapgear_outl,
-
-       .mv_inb_p               = snapgear_inb_p,
-       .mv_inw_p               = snapgear_inw,
-       .mv_inl_p               = snapgear_inl,
-       .mv_outb_p              = snapgear_outb_p,
-       .mv_outw_p              = snapgear_outw,
-       .mv_outl_p              = snapgear_outl,
-
-       .mv_init_irq            = init_snapgear_IRQ,
-};
diff --git a/arch/sh/boards/mach-systemh/Makefile b/arch/sh/boards/mach-systemh/Makefile
deleted file mode 100644 (file)
index 2cc6a23..0000000
+++ /dev/null
@@ -1,13 +0,0 @@
-#
-# Makefile for the SystemH specific parts of the kernel
-#
-
-obj-y   := setup.o irq.o io.o
-
-# XXX: This wants to be consolidated in arch/sh/drivers/pci, and more
-# importantly, with the generic sh7751_pcic_init() code. For now, we'll
-# just abuse the hell out of kbuild, because we can..
-
-obj-$(CONFIG_PCI) += pci.o
-pci-y := ../../se/7751/pci.o
-
diff --git a/arch/sh/boards/mach-systemh/io.c b/arch/sh/boards/mach-systemh/io.c
deleted file mode 100644 (file)
index 15577ff..0000000
+++ /dev/null
@@ -1,158 +0,0 @@
-/*
- * linux/arch/sh/boards/renesas/systemh/io.c
- *
- * Copyright (C) 2001  Ian da Silva, Jeremy Siegel
- * Based largely on io_se.c.
- *
- * I/O routine for Hitachi 7751 Systemh.
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <mach/systemh7751.h>
-#include <asm/addrspace.h>
-#include <asm/io.h>
-
-#define ETHER_IOMAP(adr) (0xB3000000 + (adr)) /*map to 16bits access area
-                                                of smc lan chip*/
-static inline volatile __u16 *
-port2adr(unsigned int port)
-{
-       if (port >= 0x2000)
-               return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
-       maybebadio((unsigned long)port);
-       return (volatile __u16*)port;
-}
-
-/*
- * General outline: remap really low stuff [eventually] to SuperIO,
- * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO)
- * is mapped through the PCI IO window.  Stuff with high bits (PXSEG)
- * should be way beyond the window, and is used  w/o translation for
- * compatibility.
- */
-unsigned char sh7751systemh_inb(unsigned long port)
-{
-       if (PXSEG(port))
-               return *(volatile unsigned char *)port;
-       else if (port <= 0x3F1)
-               return *(volatile unsigned char *)ETHER_IOMAP(port);
-       else
-               return (*port2adr(port))&0xff;
-}
-
-unsigned char sh7751systemh_inb_p(unsigned long port)
-{
-       unsigned char v;
-
-        if (PXSEG(port))
-                v = *(volatile unsigned char *)port;
-       else if (port <= 0x3F1)
-               v = *(volatile unsigned char *)ETHER_IOMAP(port);
-       else
-               v = (*port2adr(port))&0xff;
-       ctrl_delay();
-       return v;
-}
-
-unsigned short sh7751systemh_inw(unsigned long port)
-{
-        if (PXSEG(port))
-                return *(volatile unsigned short *)port;
-       else if (port >= 0x2000)
-               return *port2adr(port);
-       else if (port <= 0x3F1)
-               return *(volatile unsigned int *)ETHER_IOMAP(port);
-       else
-               maybebadio(port);
-       return 0;
-}
-
-unsigned int sh7751systemh_inl(unsigned long port)
-{
-        if (PXSEG(port))
-                return *(volatile unsigned long *)port;
-       else if (port >= 0x2000)
-               return *port2adr(port);
-       else if (port <= 0x3F1)
-               return *(volatile unsigned int *)ETHER_IOMAP(port);
-       else
-               maybebadio(port);
-       return 0;
-}
-
-void sh7751systemh_outb(unsigned char value, unsigned long port)
-{
-
-        if (PXSEG(port))
-                *(volatile unsigned char *)port = value;
-       else if (port <= 0x3F1)
-               *(volatile unsigned char *)ETHER_IOMAP(port) = value;
-       else
-               *(port2adr(port)) = value;
-}
-
-void sh7751systemh_outb_p(unsigned char value, unsigned long port)
-{
-        if (PXSEG(port))
-                *(volatile unsigned char *)port = value;
-       else if (port <= 0x3F1)
-               *(volatile unsigned char *)ETHER_IOMAP(port) = value;
-       else
-               *(port2adr(port)) = value;
-       ctrl_delay();
-}
-
-void sh7751systemh_outw(unsigned short value, unsigned long port)
-{
-        if (PXSEG(port))
-                *(volatile unsigned short *)port = value;
-       else if (port >= 0x2000)
-               *port2adr(port) = value;
-       else if (port <= 0x3F1)
-               *(volatile unsigned short *)ETHER_IOMAP(port) = value;
-       else
-               maybebadio(port);
-}
-
-void sh7751systemh_outl(unsigned int value, unsigned long port)
-{
-        if (PXSEG(port))
-                *(volatile unsigned long *)port = value;
-       else
-               maybebadio(port);
-}
-
-void sh7751systemh_insb(unsigned long port, void *addr, unsigned long count)
-{
-       unsigned char *p = addr;
-       while (count--) *p++ = sh7751systemh_inb(port);
-}
-
-void sh7751systemh_insw(unsigned long port, void *addr, unsigned long count)
-{
-       unsigned short *p = addr;
-       while (count--) *p++ = sh7751systemh_inw(port);
-}
-
-void sh7751systemh_insl(unsigned long port, void *addr, unsigned long count)
-{
-       maybebadio(port);
-}
-
-void sh7751systemh_outsb(unsigned long port, const void *addr, unsigned long count)
-{
-       unsigned char *p = (unsigned char*)addr;
-       while (count--) sh7751systemh_outb(*p++, port);
-}
-
-void sh7751systemh_outsw(unsigned long port, const void *addr, unsigned long count)
-{
-       unsigned short *p = (unsigned short*)addr;
-       while (count--) sh7751systemh_outw(*p++, port);
-}
-
-void sh7751systemh_outsl(unsigned long port, const void *addr, unsigned long count)
-{
-       maybebadio(port);
-}
diff --git a/arch/sh/boards/mach-systemh/irq.c b/arch/sh/boards/mach-systemh/irq.c
deleted file mode 100644 (file)
index e5ee13a..0000000
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * linux/arch/sh/boards/renesas/systemh/irq.c
- *
- * Copyright (C) 2000  Kazumoto Kojima
- *
- * Hitachi SystemH Support.
- *
- * Modified for 7751 SystemH by
- * Jonathan Short.
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-
-#include <mach/systemh7751.h>
-#include <asm/smc37c93x.h>
-
-/* address of external interrupt mask register
- * address must be set prior to use these (maybe in init_XXX_irq())
- * XXX : is it better to use .config than specifying it in code? */
-static unsigned long *systemh_irq_mask_register = (unsigned long *)0xB3F10004;
-static unsigned long *systemh_irq_request_register = (unsigned long *)0xB3F10000;
-
-static void disable_systemh_irq(struct irq_data *data)
-{
-       unsigned long val, mask = 0x01 << 1;
-
-       /* Clear the "irq"th bit in the mask and set it in the request */
-       val = __raw_readl((unsigned long)systemh_irq_mask_register);
-       val &= ~mask;
-       __raw_writel(val, (unsigned long)systemh_irq_mask_register);
-
-       val = __raw_readl((unsigned long)systemh_irq_request_register);
-       val |= mask;
-       __raw_writel(val, (unsigned long)systemh_irq_request_register);
-}
-
-static void enable_systemh_irq(struct irq_data *data)
-{
-       unsigned long val, mask = 0x01 << 1;
-
-       /* Set "irq"th bit in the mask register */
-       val = __raw_readl((unsigned long)systemh_irq_mask_register);
-       val |= mask;
-       __raw_writel(val, (unsigned long)systemh_irq_mask_register);
-}
-
-static struct irq_chip systemh_irq_type = {
-       .name           = "SystemH Register",
-       .irq_unmask     = enable_systemh_irq,
-       .irq_mask       = disable_systemh_irq,
-};
-
-void make_systemh_irq(unsigned int irq)
-{
-       disable_irq_nosync(irq);
-       set_irq_chip_and_handler(irq, &systemh_irq_type, handle_level_irq);
-       disable_systemh_irq(irq_get_irq_data(irq));
-}
diff --git a/arch/sh/boards/mach-systemh/setup.c b/arch/sh/boards/mach-systemh/setup.c
deleted file mode 100644 (file)
index 219fd80..0000000
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * linux/arch/sh/boards/renesas/systemh/setup.c
- *
- * Copyright (C) 2000  Kazumoto Kojima
- * Copyright (C) 2003  Paul Mundt
- *
- * Hitachi SystemH Support.
- *
- * Modified for 7751 SystemH by Jonathan Short.
- *
- * Rewritten for 2.6 by Paul Mundt.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <asm/machvec.h>
-#include <mach/systemh7751.h>
-
-extern void make_systemh_irq(unsigned int irq);
-
-/*
- * Initialize IRQ setting
- */
-static void __init sh7751systemh_init_irq(void)
-{
-       make_systemh_irq(0xb);  /* Ethernet interrupt */
-}
-
-static struct sh_machine_vector mv_7751systemh __initmv = {
-       .mv_name                = "7751 SystemH",
-       .mv_nr_irqs             = 72,
-
-       .mv_inb                 = sh7751systemh_inb,
-       .mv_inw                 = sh7751systemh_inw,
-       .mv_inl                 = sh7751systemh_inl,
-       .mv_outb                = sh7751systemh_outb,
-       .mv_outw                = sh7751systemh_outw,
-       .mv_outl                = sh7751systemh_outl,
-
-       .mv_inb_p               = sh7751systemh_inb_p,
-       .mv_inw_p               = sh7751systemh_inw,
-       .mv_inl_p               = sh7751systemh_inl,
-       .mv_outb_p              = sh7751systemh_outb_p,
-       .mv_outw_p              = sh7751systemh_outw,
-       .mv_outl_p              = sh7751systemh_outl,
-
-       .mv_insb                = sh7751systemh_insb,
-       .mv_insw                = sh7751systemh_insw,
-       .mv_insl                = sh7751systemh_insl,
-       .mv_outsb               = sh7751systemh_outsb,
-       .mv_outsw               = sh7751systemh_outsw,
-       .mv_outsl               = sh7751systemh_outsl,
-
-       .mv_init_irq            = sh7751systemh_init_irq,
-};
diff --git a/arch/sh/configs/secureedge5410_defconfig b/arch/sh/configs/secureedge5410_defconfig
new file mode 100644 (file)
index 0000000..7eae4e5
--- /dev/null
@@ -0,0 +1,63 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_SWAP is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_SLAB=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_CPU_SUBTYPE_SH7751R=y
+CONFIG_MEMORY_SIZE=0x01000000
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_SH_SECUREEDGE5410=y
+CONFIG_SH_DMA=y
+CONFIG_SH_DMA_API=y
+CONFIG_PCI=y
+CONFIG_NET=y
+CONFIG_INET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+CONFIG_MTD=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK_RO=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_CFI_I2 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_PLATRAM=y
+CONFIG_BLK_DEV_RAM=y
+# CONFIG_MISC_DEVICES is not set
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_NET_PCI=y
+CONFIG_8139CP=y
+CONFIG_8139TOO=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_DS1302=y
+CONFIG_EXT2_FS=y
+# CONFIG_DNOTIFY is not set
+CONFIG_TMPFS=y
+CONFIG_CRAMFS=y
+CONFIG_ROMFS_FS=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
diff --git a/arch/sh/configs/snapgear_defconfig b/arch/sh/configs/snapgear_defconfig
deleted file mode 100644 (file)
index 7eae4e5..0000000
+++ /dev/null
@@ -1,63 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_SYSCTL_SYSCALL is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_SLAB=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7751R=y
-CONFIG_MEMORY_SIZE=0x01000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_SECUREEDGE5410=y
-CONFIG_SH_DMA=y
-CONFIG_SH_DMA_API=y
-CONFIG_PCI=y
-CONFIG_NET=y
-CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK_RO=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_CFI_I2 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PLATRAM=y
-CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_8139CP=y
-CONFIG_8139TOO=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_DS1302=y
-CONFIG_EXT2_FS=y
-# CONFIG_DNOTIFY is not set
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_ROMFS_FS=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
diff --git a/arch/sh/configs/systemh_defconfig b/arch/sh/configs/systemh_defconfig
deleted file mode 100644 (file)
index b58dfc5..0000000
+++ /dev/null
@@ -1,28 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL_SYSCALL is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7751R=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_MEMORY_SIZE=0x00400000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_7751_SYSTEMH=y
-CONFIG_PREEMPT=y
-# CONFIG_STANDALONE is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=1024
-# CONFIG_INPUT is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_VT is not set
-CONFIG_HW_RANDOM=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_ROMFS_FS=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
index 446b3831c2149380265476f47674d4ad4ea72b1e..3d1ae2bfaa6fd7056701e8ddc41538d94a4a1a71 100644 (file)
 /*
  * These will never work in 32-bit, don't even bother.
  */
-#define P1SEGADDR(a)   __futile_remapping_attempt
-#define P2SEGADDR(a)   __futile_remapping_attempt
-#define P3SEGADDR(a)   __futile_remapping_attempt
-#define P4SEGADDR(a)   __futile_remapping_attempt
+#define P1SEGADDR(a)   ({ (void)(a); BUG(); NULL; })
+#define P2SEGADDR(a)   ({ (void)(a); BUG(); NULL; })
+#define P3SEGADDR(a)   ({ (void)(a); BUG(); NULL; })
+#define P4SEGADDR(a)   ({ (void)(a); BUG(); NULL; })
 #endif
 #endif /* P1SEG */
 
index a15f1058bbf439b8895f1b3d277f7e1bcf05c6aa..083ea068e819e80a389d5610bc9e19243d4ed950 100644 (file)
@@ -66,7 +66,6 @@ static inline unsigned long long neff_sign_extend(unsigned long val)
 #define PHYS_ADDR_MASK29               0x1fffffff
 #define PHYS_ADDR_MASK32               0xffffffff
 
-#ifdef CONFIG_PMB
 static inline unsigned long phys_addr_mask(void)
 {
        /* Is the MMU in 29bit mode? */
@@ -75,17 +74,6 @@ static inline unsigned long phys_addr_mask(void)
 
        return PHYS_ADDR_MASK32;
 }
-#elif defined(CONFIG_32BIT)
-static inline unsigned long phys_addr_mask(void)
-{
-       return PHYS_ADDR_MASK32;
-}
-#else
-static inline unsigned long phys_addr_mask(void)
-{
-       return PHYS_ADDR_MASK29;
-}
-#endif
 
 #define PTE_PHYS_MASK          (phys_addr_mask() & PAGE_MASK)
 #define PTE_FLAGS_MASK         (~(PTE_PHYS_MASK) << PAGE_SHIFT)
index 1f1af5afff0374537f989911d4e98f51078a9c1e..10c8b1823a181ef6abd8f07766c801f7c2c6d3f1 100644 (file)
@@ -10,6 +10,7 @@
 #include <linux/compiler.h>
 #include <linux/linkage.h>
 #include <asm/types.h>
+#include <asm/uncached.h>
 
 #define AT_VECTOR_SIZE_ARCH 5 /* entries in ARCH_DLINFO */
 
@@ -137,9 +138,6 @@ extern unsigned int instruction_size(unsigned int insn);
 #define instruction_size(insn) (4)
 #endif
 
-extern unsigned long cached_to_uncached;
-extern unsigned long uncached_size;
-
 void per_cpu_trap_init(void);
 void default_idle(void);
 void cpu_idle_wait(void);
index c941b273940581bc4221458a8cabf639829e1500..a4ad1cd9bc4d02740bb8afcb1936a932b2ed3f35 100644 (file)
@@ -145,42 +145,6 @@ do {                                                               \
                __restore_dsp(prev);                            \
 } while (0)
 
-/*
- * Jump to uncached area.
- * When handling TLB or caches, we need to do it from an uncached area.
- */
-#define jump_to_uncached()                     \
-do {                                           \
-       unsigned long __dummy;                  \
-                                               \
-       __asm__ __volatile__(                   \
-               "mova   1f, %0\n\t"             \
-               "add    %1, %0\n\t"             \
-               "jmp    @%0\n\t"                \
-               " nop\n\t"                      \
-               ".balign 4\n"                   \
-               "1:"                            \
-               : "=&z" (__dummy)               \
-               : "r" (cached_to_uncached));    \
-} while (0)
-
-/*
- * Back to cached area.
- */
-#define back_to_cached()                               \
-do {                                                   \
-       unsigned long __dummy;                          \
-       ctrl_barrier();                                 \
-       __asm__ __volatile__(                           \
-               "mov.l  1f, %0\n\t"                     \
-               "jmp    @%0\n\t"                        \
-               " nop\n\t"                              \
-               ".balign 4\n"                           \
-               "1:     .long 2f\n"                     \
-               "2:"                                    \
-               : "=&r" (__dummy));                     \
-} while (0)
-
 #ifdef CONFIG_CPU_HAS_SR_RB
 #define lookup_exception_vector()      \
 ({                                     \
index 36338646dfc81832227e78d39ccf6cdc71df4963..8593bc8d1a4e74af89ace4cb2e767b9fd0567ea6 100644 (file)
@@ -34,9 +34,6 @@ do {                                                          \
                              &next->thread);                   \
 } while (0)
 
-#define jump_to_uncached()     do { } while (0)
-#define back_to_cached()       do { } while (0)
-
 #define __icbi(addr)   __asm__ __volatile__ ( "icbi %0, 0\n\t" : : "r" (addr))
 #define __ocbp(addr)   __asm__ __volatile__ ( "ocbp %0, 0\n\t" : : "r" (addr))
 #define __ocbi(addr)   __asm__ __volatile__ ( "ocbi %0, 0\n\t" : : "r" (addr))
index e3419f96626ad49719130f120bcb71bcbdb40c42..6f8816b79cf152091b1fc08e6cd4dc5d4390bfe2 100644 (file)
@@ -4,15 +4,55 @@
 #include <linux/bug.h>
 
 #ifdef CONFIG_UNCACHED_MAPPING
+extern unsigned long cached_to_uncached;
+extern unsigned long uncached_size;
 extern unsigned long uncached_start, uncached_end;
 
 extern int virt_addr_uncached(unsigned long kaddr);
 extern void uncached_init(void);
 extern void uncached_resize(unsigned long size);
+
+/*
+ * Jump to uncached area.
+ * When handling TLB or caches, we need to do it from an uncached area.
+ */
+#define jump_to_uncached()                     \
+do {                                           \
+       unsigned long __dummy;                  \
+                                               \
+       __asm__ __volatile__(                   \
+               "mova   1f, %0\n\t"             \
+               "add    %1, %0\n\t"             \
+               "jmp    @%0\n\t"                \
+               " nop\n\t"                      \
+               ".balign 4\n"                   \
+               "1:"                            \
+               : "=&z" (__dummy)               \
+               : "r" (cached_to_uncached));    \
+} while (0)
+
+/*
+ * Back to cached area.
+ */
+#define back_to_cached()                               \
+do {                                                   \
+       unsigned long __dummy;                          \
+       ctrl_barrier();                                 \
+       __asm__ __volatile__(                           \
+               "mov.l  1f, %0\n\t"                     \
+               "jmp    @%0\n\t"                        \
+               " nop\n\t"                              \
+               ".balign 4\n"                           \
+               "1:     .long 2f\n"                     \
+               "2:"                                    \
+               : "=&r" (__dummy));                     \
+} while (0)
 #else
 #define virt_addr_uncached(kaddr)      (0)
 #define uncached_init()                        do { } while (0)
 #define uncached_resize(size)          BUG()
+#define jump_to_uncached()             do { } while (0)
+#define back_to_cached()               do { } while (0)
 #endif
 
 #endif /* __ASM_SH_UNCACHED_H */
diff --git a/arch/sh/include/mach-common/mach/edosk7705.h b/arch/sh/include/mach-common/mach/edosk7705.h
deleted file mode 100644 (file)
index efc43b3..0000000
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __ASM_SH_EDOSK7705_H
-#define __ASM_SH_EDOSK7705_H
-
-#define __IO_PREFIX sh_edosk7705
-#include <asm/io_generic.h>
-
-#endif /* __ASM_SH_EDOSK7705_H */
index 1aed15856e11ff5bae72b2522f94f816084e0dee..dcb05fa8c164d9c9044df5ce85665953328f7e21 100644 (file)
@@ -68,13 +68,4 @@ extern void microdev_print_fpga_intc_status(void);
 #define __IO_PREFIX microdev
 #include <asm/io_generic.h>
 
-#if defined(CONFIG_PCI)
-unsigned char  microdev_pci_inb(unsigned long port);
-unsigned short microdev_pci_inw(unsigned long port);
-unsigned long  microdev_pci_inl(unsigned long port);
-void           microdev_pci_outb(unsigned char  data, unsigned long port);
-void           microdev_pci_outw(unsigned short data, unsigned long port);
-void           microdev_pci_outl(unsigned long  data, unsigned long port);
-#endif
-
 #endif /* __ASM_SH_MICRODEV_H */
diff --git a/arch/sh/include/mach-common/mach/secureedge5410.h b/arch/sh/include/mach-common/mach/secureedge5410.h
new file mode 100644 (file)
index 0000000..3653b9a
--- /dev/null
@@ -0,0 +1,49 @@
+/*
+ * include/asm-sh/snapgear.h
+ *
+ * Modified version of io_se.h for the snapgear-specific functions.
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * IO functions for a SnapGear
+ */
+
+#ifndef _ASM_SH_IO_SNAPGEAR_H
+#define _ASM_SH_IO_SNAPGEAR_H
+
+#define __IO_PREFIX    snapgear
+#include <asm/io_generic.h>
+
+/*
+ * We need to remember what was written to the ioport as some bits
+ * are shared with other functions and you cannot read back what was
+ * written :-|
+ *
+ * Bit        Read                   Write
+ * -----------------------------------------------
+ * D0         DCD on ttySC1          power
+ * D1         Reset Switch           heatbeat
+ * D2         ttySC0 CTS (7100)      LAN
+ * D3         -                      WAN
+ * D4         ttySC0 DCD (7100)      CONSOLE
+ * D5         -                      ONLINE
+ * D6         -                      VPN
+ * D7         -                      DTR on ttySC1
+ * D8         -                      ttySC0 RTS (7100)
+ * D9         -                      ttySC0 DTR (7100)
+ * D10        -                      RTC SCLK
+ * D11        RTC DATA               RTC DATA
+ * D12        -                      RTS RESET
+ */
+
+#define SECUREEDGE_IOPORT_ADDR ((volatile short *) 0xb0000000)
+extern unsigned short secureedge5410_ioport;
+
+#define SECUREEDGE_WRITE_IOPORT(val, mask) (*SECUREEDGE_IOPORT_ADDR = \
+        (secureedge5410_ioport = \
+                       ((secureedge5410_ioport & ~(mask)) | ((val) & (mask)))))
+#define SECUREEDGE_READ_IOPORT() \
+        ((*SECUREEDGE_IOPORT_ADDR&0x0817) | (secureedge5410_ioport&~0x0817))
+
+#endif /* _ASM_SH_IO_SNAPGEAR_H */
diff --git a/arch/sh/include/mach-common/mach/snapgear.h b/arch/sh/include/mach-common/mach/snapgear.h
deleted file mode 100644 (file)
index 042d95f..0000000
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * include/asm-sh/snapgear.h
- *
- * Modified version of io_se.h for the snapgear-specific functions.
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * IO functions for a SnapGear
- */
-
-#ifndef _ASM_SH_IO_SNAPGEAR_H
-#define _ASM_SH_IO_SNAPGEAR_H
-
-#if defined(CONFIG_CPU_SH4)
-/*
- * The external interrupt lines, these take up ints 0 - 15 inclusive
- * depending on the priority for the interrupt.  In fact the priority
- * is the interrupt :-)
- */
-
-#define IRL0_IRQ       2
-#define IRL0_PRIORITY  13
-
-#define IRL1_IRQ       5
-#define IRL1_PRIORITY  10
-
-#define IRL2_IRQ       8
-#define IRL2_PRIORITY  7
-
-#define IRL3_IRQ       11
-#define IRL3_PRIORITY  4
-#endif
-
-#define __IO_PREFIX    snapgear
-#include <asm/io_generic.h>
-
-#ifdef CONFIG_SH_SECUREEDGE5410
-/*
- * We need to remember what was written to the ioport as some bits
- * are shared with other functions and you cannot read back what was
- * written :-|
- *
- * Bit        Read                   Write
- * -----------------------------------------------
- * D0         DCD on ttySC1          power
- * D1         Reset Switch           heatbeat
- * D2         ttySC0 CTS (7100)      LAN
- * D3         -                      WAN
- * D4         ttySC0 DCD (7100)      CONSOLE
- * D5         -                      ONLINE
- * D6         -                      VPN
- * D7         -                      DTR on ttySC1
- * D8         -                      ttySC0 RTS (7100)
- * D9         -                      ttySC0 DTR (7100)
- * D10        -                      RTC SCLK
- * D11        RTC DATA               RTC DATA
- * D12        -                      RTS RESET
- */
-
-#define SECUREEDGE_IOPORT_ADDR ((volatile short *) 0xb0000000)
-extern unsigned short secureedge5410_ioport;
-
-#define SECUREEDGE_WRITE_IOPORT(val, mask) (*SECUREEDGE_IOPORT_ADDR = \
-        (secureedge5410_ioport = \
-                       ((secureedge5410_ioport & ~(mask)) | ((val) & (mask)))))
-#define SECUREEDGE_READ_IOPORT() \
-        ((*SECUREEDGE_IOPORT_ADDR&0x0817) | (secureedge5410_ioport&~0x0817))
-#endif
-
-#endif /* _ASM_SH_IO_SNAPGEAR_H */
diff --git a/arch/sh/include/mach-common/mach/systemh7751.h b/arch/sh/include/mach-common/mach/systemh7751.h
deleted file mode 100644 (file)
index 4161122..0000000
+++ /dev/null
@@ -1,71 +0,0 @@
-#ifndef __ASM_SH_SYSTEMH_7751SYSTEMH_H
-#define __ASM_SH_SYSTEMH_7751SYSTEMH_H
-
-/*
- * linux/include/asm-sh/systemh/7751systemh.h
- *
- * Copyright (C) 2000  Kazumoto Kojima
- *
- * Hitachi SystemH support
-
- * Modified for 7751 SystemH by
- * Jonathan Short, 2002.
- */
-
-/* Box specific addresses.  */
-
-#define PA_ROM         0x00000000      /* EPROM */
-#define PA_ROM_SIZE    0x00400000      /* EPROM size 4M byte */
-#define PA_FROM                0x01000000      /* EPROM */
-#define PA_FROM_SIZE   0x00400000      /* EPROM size 4M byte */
-#define PA_EXT1                0x04000000
-#define PA_EXT1_SIZE   0x04000000
-#define PA_EXT2                0x08000000
-#define PA_EXT2_SIZE   0x04000000
-#define PA_SDRAM       0x0c000000
-#define PA_SDRAM_SIZE  0x04000000
-
-#define PA_EXT4                0x12000000
-#define PA_EXT4_SIZE   0x02000000
-#define PA_EXT5                0x14000000
-#define PA_EXT5_SIZE   0x04000000
-#define PA_PCIC                0x18000000      /* MR-SHPC-01 PCMCIA */
-
-#define PA_DIPSW0      0xb9000000      /* Dip switch 5,6 */
-#define PA_DIPSW1      0xb9000002      /* Dip switch 7,8 */
-#define PA_LED         0xba000000      /* LED */
-#define        PA_BCR          0xbb000000      /* FPGA on the MS7751SE01 */
-
-#define PA_MRSHPC      0xb83fffe0      /* MR-SHPC-01 PCMCIA controller */
-#define PA_MRSHPC_MW1  0xb8400000      /* MR-SHPC-01 memory window base */
-#define PA_MRSHPC_MW2  0xb8500000      /* MR-SHPC-01 attribute window base */
-#define PA_MRSHPC_IO   0xb8600000      /* MR-SHPC-01 I/O window base */
-#define MRSHPC_MODE     (PA_MRSHPC + 4)
-#define MRSHPC_OPTION   (PA_MRSHPC + 6)
-#define MRSHPC_CSR      (PA_MRSHPC + 8)
-#define MRSHPC_ISR      (PA_MRSHPC + 10)
-#define MRSHPC_ICR      (PA_MRSHPC + 12)
-#define MRSHPC_CPWCR    (PA_MRSHPC + 14)
-#define MRSHPC_MW0CR1   (PA_MRSHPC + 16)
-#define MRSHPC_MW1CR1   (PA_MRSHPC + 18)
-#define MRSHPC_IOWCR1   (PA_MRSHPC + 20)
-#define MRSHPC_MW0CR2   (PA_MRSHPC + 22)
-#define MRSHPC_MW1CR2   (PA_MRSHPC + 24)
-#define MRSHPC_IOWCR2   (PA_MRSHPC + 26)
-#define MRSHPC_CDCR     (PA_MRSHPC + 28)
-#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
-
-#define BCR_ILCRA      (PA_BCR + 0)
-#define BCR_ILCRB      (PA_BCR + 2)
-#define BCR_ILCRC      (PA_BCR + 4)
-#define BCR_ILCRD      (PA_BCR + 6)
-#define BCR_ILCRE      (PA_BCR + 8)
-#define BCR_ILCRF      (PA_BCR + 10)
-#define BCR_ILCRG      (PA_BCR + 12)
-
-#define IRQ_79C973     13
-
-#define __IO_PREFIX    sh7751systemh
-#include <asm/io_generic.h>
-
-#endif  /* __ASM_SH_SYSTEMH_7751SYSTEMH_H */
index 2d9700c6b53a07426bdc6253e55a62effed962c0..0fe2e9329cb25f699acd433dd4f2d9b4b945f00b 100644 (file)
@@ -48,7 +48,7 @@ static struct clk r_clk = {
  * Default rate for the root input clock, reset this with clk_set_rate()
  * from the platform code.
  */
-struct clk extal_clk = {
+static struct clk extal_clk = {
        .rate           = 33333333,
 };
 
@@ -111,7 +111,7 @@ static struct clk div3_clk = {
        .parent         = &pll_clk,
 };
 
-struct clk *main_clks[] = {
+static struct clk *main_clks[] = {
        &r_clk,
        &extal_clk,
        &fll_clk,
@@ -156,7 +156,7 @@ struct clk div4_clks[DIV4_NR] = {
 
 enum { DIV6_V, DIV6_FA, DIV6_FB, DIV6_I, DIV6_S, DIV6_NR };
 
-struct clk div6_clks[DIV6_NR] = {
+static struct clk div6_clks[DIV6_NR] = {
        [DIV6_V] = SH_CLK_DIV6(&div3_clk, VCLKCR, 0),
        [DIV6_FA] = SH_CLK_DIV6(&div3_clk, FCLKACR, 0),
        [DIV6_FB] = SH_CLK_DIV6(&div3_clk, FCLKBCR, 0),
index 09370392aff15d791d612ac57bcdf0c6031d8443..c3e61b36649380f5db818c5f6edb05bfc897de1c 100644 (file)
@@ -79,7 +79,7 @@ config 29BIT
 
 config 32BIT
        bool
-       default y if CPU_SH5
+       default y if CPU_SH5 || !MMU
 
 config PMB
        bool "Support 32-bit physical addressing through PMB"
index 0387932869904a042472cca19b65141b5b8bdc9f..40733a9524021d42d42ddc5a8d7e08ef77a1c155 100644 (file)
@@ -79,21 +79,20 @@ void dma_generic_free_coherent(struct device *dev, size_t size,
 void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
                    enum dma_data_direction direction)
 {
-#if defined(CONFIG_CPU_SH5) || defined(CONFIG_PMB)
-       void *p1addr = vaddr;
-#else
-       void *p1addr = (void*) P1SEGADDR((unsigned long)vaddr);
-#endif
+       void *addr;
+
+       addr = __in_29bit_mode() ?
+              (void *)P1SEGADDR((unsigned long)vaddr) : vaddr;
 
        switch (direction) {
        case DMA_FROM_DEVICE:           /* invalidate only */
-               __flush_invalidate_region(p1addr, size);
+               __flush_invalidate_region(addr, size);
                break;
        case DMA_TO_DEVICE:             /* writeback only */
-               __flush_wback_region(p1addr, size);
+               __flush_wback_region(addr, size);
                break;
        case DMA_BIDIRECTIONAL:         /* writeback and invalidate */
-               __flush_purge_region(p1addr, size);
+               __flush_purge_region(addr, size);
                break;
        default:
                BUG();
index 8a4eca551fc0a08542085faddeac7af373ad091b..a7767da815e91453c5b5526a05f4c72405e4afba 100644 (file)
@@ -28,7 +28,7 @@ EXPORT_SYMBOL(virt_addr_uncached);
 
 void __init uncached_init(void)
 {
-#ifdef CONFIG_29BIT
+#if defined(CONFIG_29BIT) || !defined(CONFIG_MMU)
        uncached_start = P2SEG;
 #else
        uncached_start = memory_end;
index 9f56eb978024ef2b6e93497a6580d00dbc7f62eb..0e68465e7b50920ffcaa8a832402fdfc3670226c 100644 (file)
@@ -26,7 +26,6 @@ HD64461                       HD64461
 7724SE                 SH_7724_SOLUTION_ENGINE
 7751SE                 SH_7751_SOLUTION_ENGINE
 7780SE                 SH_7780_SOLUTION_ENGINE
-7751SYSTEMH            SH_7751_SYSTEMH
 HP6XX                  SH_HP6XX
 DREAMCAST              SH_DREAMCAST
 SNAPGEAR               SH_SECUREEDGE5410
index 8f19b380ca83a6aec417ab8eb8b8a2d50649ea8d..3951020e494ac803001083b186a5b7614eb6d42f 100644 (file)
@@ -4573,8 +4573,8 @@ static void __exit floppy_module_exit(void)
                        device_remove_file(&floppy_device[drive].dev, &dev_attr_cmos);
                        platform_device_unregister(&floppy_device[drive]);
                }
-               put_disk(disks[drive]);
                blk_cleanup_queue(disks[drive]->queue);
+               put_disk(disks[drive]);
        }
 
        del_timer_sync(&fd_timeout);
index 359d1e04626cb938784290a5700058a3115d7b34..f0d63892264410b23e19753885868cca81071eda 100644 (file)
@@ -35,7 +35,7 @@
 
 #ifdef CONFIG_SH_SECUREEDGE5410
 #include <asm/rtc.h>
-#include <mach/snapgear.h>
+#include <mach/secureedge5410.h>
 
 #define        RTC_RESET       0x1000
 #define        RTC_IODATA      0x0800
index fd0d1b98901c2a0c13cc925e078139be079d1f43..09615b51d5910e6b1b899e265836cb3137440ad1 100644 (file)
@@ -90,8 +90,8 @@ struct clk_rate_round_data {
 static long clk_rate_round_helper(struct clk_rate_round_data *rounder)
 {
        unsigned long rate_error, rate_error_prev = ~0UL;
-       unsigned long rate_best_fit = rounder->rate;
        unsigned long highest, lowest, freq;
+       long rate_best_fit = -ENOENT;
        int i;
 
        highest = 0;
@@ -146,7 +146,7 @@ long clk_rate_table_round(struct clk *clk,
        };
 
        if (clk->nr_freqs < 1)
-               return 0;
+               return -ENOSYS;
 
        return clk_rate_round_helper(&table_round);
 }
@@ -541,6 +541,98 @@ long clk_round_rate(struct clk *clk, unsigned long rate)
 }
 EXPORT_SYMBOL_GPL(clk_round_rate);
 
+long clk_round_parent(struct clk *clk, unsigned long target,
+                     unsigned long *best_freq, unsigned long *parent_freq,
+                     unsigned int div_min, unsigned int div_max)
+{
+       struct cpufreq_frequency_table *freq, *best = NULL;
+       unsigned long error = ULONG_MAX, freq_high, freq_low, div;
+       struct clk *parent = clk_get_parent(clk);
+
+       if (!parent) {
+               *parent_freq = 0;
+               *best_freq = clk_round_rate(clk, target);
+               return abs(target - *best_freq);
+       }
+
+       for (freq = parent->freq_table; freq->frequency != CPUFREQ_TABLE_END;
+            freq++) {
+               if (freq->frequency == CPUFREQ_ENTRY_INVALID)
+                       continue;
+
+               if (unlikely(freq->frequency / target <= div_min - 1)) {
+                       unsigned long freq_max;
+
+                       freq_max = (freq->frequency + div_min / 2) / div_min;
+                       if (error > target - freq_max) {
+                               error = target - freq_max;
+                               best = freq;
+                               if (best_freq)
+                                       *best_freq = freq_max;
+                       }
+
+                       pr_debug("too low freq %lu, error %lu\n", freq->frequency,
+                                target - freq_max);
+
+                       if (!error)
+                               break;
+
+                       continue;
+               }
+
+               if (unlikely(freq->frequency / target >= div_max)) {
+                       unsigned long freq_min;
+
+                       freq_min = (freq->frequency + div_max / 2) / div_max;
+                       if (error > freq_min - target) {
+                               error = freq_min - target;
+                               best = freq;
+                               if (best_freq)
+                                       *best_freq = freq_min;
+                       }
+
+                       pr_debug("too high freq %lu, error %lu\n", freq->frequency,
+                                freq_min - target);
+
+                       if (!error)
+                               break;
+
+                       continue;
+               }
+
+               div = freq->frequency / target;
+               freq_high = freq->frequency / div;
+               freq_low = freq->frequency / (div + 1);
+
+               if (freq_high - target < error) {
+                       error = freq_high - target;
+                       best = freq;
+                       if (best_freq)
+                               *best_freq = freq_high;
+               }
+
+               if (target - freq_low < error) {
+                       error = target - freq_low;
+                       best = freq;
+                       if (best_freq)
+                               *best_freq = freq_low;
+               }
+
+               pr_debug("%u / %lu = %lu, / %lu = %lu, best %lu, parent %u\n",
+                        freq->frequency, div, freq_high, div + 1, freq_low,
+                        *best_freq, best->frequency);
+
+               if (!error)
+                       break;
+       }
+
+       if (parent_freq)
+               *parent_freq = best->frequency;
+
+       return error;
+}
+EXPORT_SYMBOL_GPL(clk_round_parent);
+
 #ifdef CONFIG_PM
 static int clks_sysdev_suspend(struct sys_device *dev, pm_message_t state)
 {
index 873a99ff8f64a454a505d1838be751dad20ae181..e5e9e6735f7d62e3d585505de7be4fe379fbbd40 100644 (file)
@@ -79,7 +79,7 @@ static void __init intc_register_irq(struct intc_desc *desc,
         * Register the IRQ position with the global IRQ map, then insert
         * it in to the radix tree.
         */
-       irq_reserve_irqs(irq, 1);
+       irq_reserve_irq(irq);
 
        raw_spin_lock_irqsave(&intc_big_lock, flags);
        radix_tree_insert(&d->tree, enum_id, intc_irq_xlate_get(irq));
index 4187cce20ffdc9cd0997b276e2f5e8dc020e2519..a3677c9dfe36e3fa6ebcac37bee81af58d9ece5c 100644 (file)
@@ -60,5 +60,5 @@ void reserve_intc_vectors(struct intc_vect *vectors, unsigned int nr_vecs)
        int i;
 
        for (i = 0; i < nr_vecs; i++)
-               irq_reserve_irqs(evt2irq(vectors[i].vect), 1);
+               irq_reserve_irq(evt2irq(vectors[i].vect));
 }
index 4dca992f3093771993ac9d98d1233df5e2f33cfa..cea0c38e7a63dfad2544043c49fca25aea9a7563 100644 (file)
@@ -122,6 +122,10 @@ int clk_rate_table_find(struct clk *clk,
 long clk_rate_div_range_round(struct clk *clk, unsigned int div_min,
                              unsigned int div_max, unsigned long rate);
 
+long clk_round_parent(struct clk *clk, unsigned long target,
+                     unsigned long *best_freq, unsigned long *parent_freq,
+                     unsigned int div_min, unsigned int div_max);
+
 #define SH_CLK_MSTP32(_parent, _enable_reg, _enable_bit, _flags)       \
 {                                                                      \
        .parent         = _parent,                                      \