]> git.openfabrics.org - ~shefty/rdma-dev.git/commitdiff
ARM: EXYNOS: save L2 settings during bootup
authorAmit Daniel Kachhap <amit.kachhap@linaro.org>
Thu, 8 Mar 2012 10:07:41 +0000 (02:07 -0800)
committerKukjin Kim <kgene.kim@samsung.com>
Fri, 9 Mar 2012 15:04:50 +0000 (07:04 -0800)
This patch adds code to save L2 register configuration at boot, and
later used to resume L2 before MMU is enabled in suspend and cpuidle
resume paths.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Amit Daniel Kachhap <amit.kachhap@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
arch/arm/mach-exynos/common.c

index c59e18871006a601af8d061b58d3f205cb7d5d28..9ff38aa08fd09bbff5aff49e02474cd1576e72d9 100644 (file)
 #include <asm/hardware/gic.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
+#include <asm/cacheflush.h>
 
 #include <mach/regs-irq.h>
 #include <mach/regs-pmu.h>
 #include <mach/regs-gpio.h>
+#include <mach/pmu.h>
 
 #include <plat/cpu.h>
 #include <plat/clock.h>
@@ -441,20 +443,38 @@ core_initcall(exynos4_core_init);
 #ifdef CONFIG_CACHE_L2X0
 static int __init exynos4_l2x0_cache_init(void)
 {
-       /* TAG, Data Latency Control: 2cycle */
-       __raw_writel(0x110, S5P_VA_L2CC + L2X0_TAG_LATENCY_CTRL);
+       if (!(__raw_readl(S5P_VA_L2CC + L2X0_CTRL) & 0x1)) {
+               l2x0_saved_regs.phy_base = EXYNOS4_PA_L2CC;
+               /* TAG, Data Latency Control: 2 cycles */
+               l2x0_saved_regs.tag_latency = 0x110;
 
-       if (soc_is_exynos4210())
-               __raw_writel(0x110, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
-       else if (soc_is_exynos4212() || soc_is_exynos4412())
-               __raw_writel(0x120, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
+               if (soc_is_exynos4212() || soc_is_exynos4412())
+                       l2x0_saved_regs.data_latency = 0x120;
+               else
+                       l2x0_saved_regs.data_latency = 0x110;
+
+               l2x0_saved_regs.prefetch_ctrl = 0x30000007;
+               l2x0_saved_regs.pwr_ctrl =
+                       (L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN);
+
+               l2x0_regs_phys = virt_to_phys(&l2x0_saved_regs);
 
-       /* L2X0 Prefetch Control */
-       __raw_writel(0x30000007, S5P_VA_L2CC + L2X0_PREFETCH_CTRL);
+               __raw_writel(l2x0_saved_regs.tag_latency,
+                               S5P_VA_L2CC + L2X0_TAG_LATENCY_CTRL);
+               __raw_writel(l2x0_saved_regs.data_latency,
+                               S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
 
-       /* L2X0 Power Control */
-       __raw_writel(L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN,
-                    S5P_VA_L2CC + L2X0_POWER_CTRL);
+               /* L2X0 Prefetch Control */
+               __raw_writel(l2x0_saved_regs.prefetch_ctrl,
+                               S5P_VA_L2CC + L2X0_PREFETCH_CTRL);
+
+               /* L2X0 Power Control */
+               __raw_writel(l2x0_saved_regs.pwr_ctrl,
+                               S5P_VA_L2CC + L2X0_POWER_CTRL);
+
+               clean_dcache_area(&l2x0_regs_phys, sizeof(unsigned long));
+               clean_dcache_area(&l2x0_saved_regs, sizeof(struct l2x0_regs));
+       }
 
        l2x0_init(S5P_VA_L2CC, 0x7C470001, 0xC200ffff);