~shefty/rdma-dev.git
8 years agoASoC: arizona: Add parentheses
Mark Brown [Thu, 29 Nov 2012 15:16:10 +0000 (15:16 +0000)]
ASoC: arizona: Add parentheses

Some compiler versions complain.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoASoC: wm_adsp: Set the core enable as well as start bit for ADSP2
Mark Brown [Wed, 28 Nov 2012 19:53:59 +0000 (19:53 +0000)]
ASoC: wm_adsp: Set the core enable as well as start bit for ADSP2

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoASoC: wm_adsp: Enable DVFS for ADSP2
Mark Brown [Wed, 28 Nov 2012 17:20:32 +0000 (17:20 +0000)]
ASoC: wm_adsp: Enable DVFS for ADSP2

Some ADSP devices can make use of DVFS to optimise power consumption
depending on the operating frequency of the DSP core. Implement
support for this in the generic ADSP code.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoASoC: adsp: Add ADSP base support
Mark Brown [Thu, 11 Oct 2012 02:54:02 +0000 (11:54 +0900)]
ASoC: adsp: Add ADSP base support

Many current Wolfson devices feature DSPs based around an architecture
known as ADSP.  Since there is a lot of commonality in the system
integration of these devices a common library will be used to provide
support for them.

This version provides equivalent support for ADSP1 to that currently
included in the WM2200 driver.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoASoC: wm2200: Provide initial coefficient loading
Mark Brown [Fri, 5 Oct 2012 18:43:18 +0000 (19:43 +0100)]
ASoC: wm2200: Provide initial coefficient loading

Allow a coefficient set provided using the Wolfson callibration tools to
be provided along with the firmware files. Currently only coefficient
files which configure absolute register addresses are supported.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoASoC: wm2200: Initial DSP support
Mark Brown [Thu, 4 Oct 2012 15:31:52 +0000 (16:31 +0100)]
ASoC: wm2200: Initial DSP support

Support download and execution of firmwares to the DSPs on the WM2200.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoASoC: wm2200: Fully plumb the DSPs into the routing map
Mark Brown [Wed, 3 Oct 2012 14:57:03 +0000 (15:57 +0100)]
ASoC: wm2200: Fully plumb the DSPs into the routing map

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoASoC: wm2200: Map DSPs into regmap
Mark Brown [Tue, 2 Oct 2012 19:14:49 +0000 (20:14 +0100)]
ASoC: wm2200: Map DSPs into regmap

Use the regmap ranges support to add the WM2200 DSP core memory pages
into the "register map" beyond the end of the real register map. We
don't extend beyond 16 bits since the regmap API will iterate over
every register doing diagnostics.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoASoC: wm2200: Implement AEC loopback support
Mark Brown [Tue, 2 Oct 2012 18:30:17 +0000 (19:30 +0100)]
ASoC: wm2200: Implement AEC loopback support

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoASoC: wm2200: Convert to devm APIs
Mark Brown [Mon, 1 Oct 2012 18:27:45 +0000 (19:27 +0100)]
ASoC: wm2200: Convert to devm APIs

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoASoC: wm2200: Fix non-inverted OUT2 mute control
Mark Brown [Tue, 2 Oct 2012 18:10:43 +0000 (19:10 +0100)]
ASoC: wm2200: Fix non-inverted OUT2 mute control

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org
8 years agoASoC: wm2200: Use rev A register patches on rev B
Mark Brown [Tue, 2 Oct 2012 11:02:48 +0000 (12:02 +0100)]
ASoC: wm2200: Use rev A register patches on rev B

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org
8 years agoASoC: bells: Correct typo in sub speaker DAI name for WM5110
Mark Brown [Wed, 26 Sep 2012 15:22:32 +0000 (16:22 +0100)]
ASoC: bells: Correct typo in sub speaker DAI name for WM5110

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoMerge branches 'asoc-twl6040' and 'asoc-omap' into for-3.7
Mark Brown [Thu, 4 Oct 2012 17:57:34 +0000 (18:57 +0100)]
Merge branches 'asoc-twl6040' and 'asoc-omap' into for-3.7

8 years agoASoC: ams-delta: Convert to use snd_soc_register_card()
Janusz Krzysztofik [Wed, 3 Oct 2012 10:46:57 +0000 (12:46 +0200)]
ASoC: ams-delta: Convert to use snd_soc_register_card()

The old method of registering with the ASoC core by creating a
"soc-audio" platform device no longer works for Amstrad Delta sound card
after recent changes to drvdata handling (commit
0998d0631001288a5974afc0b2a5f568bcdecb4d, 'device-core: Ensure drvdata =
NULL when no driver is bound'.

Use snd_soc_register_card() method instead, as suggested by the ASoC
core generated warning message, and move both the card and codec
platform device registration to the arch board file where those belong.

Created and tested against linux-3.6-rc5.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoASoC: omap-mcpdm: Remove OMAP revision check
Peter Ujfalusi [Thu, 4 Oct 2012 08:27:16 +0000 (11:27 +0300)]
ASoC: omap-mcpdm: Remove OMAP revision check

The OMAP revision check is not needed since the watchdog bit is not in use
on 4430 ES1.0 and have no effect when we set the bit. The watchdog need to
be enabled on all other revisions.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoASoC: Fix wrong include for McPDM
Tony Lindgren [Thu, 4 Oct 2012 08:27:15 +0000 (11:27 +0300)]
ASoC: Fix wrong include for McPDM

McPDM needs platt/cpu.h for omap_rev and not omap_hwmod.h.
Drivers must not include omap_hwmod.h at, it will be
private to mach-omap2 soon. Fix the problem before other
drivers will also start including omap_hwmod.h.

Note that also plat/cpu.h will be going away, so the
omap_rev check needs to be replaced with mcpdm-watchdog
flag from platform_data or DT.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoASoC: omap-abe-twl6040: Fix typo of Vibrator
Peter Ujfalusi [Tue, 2 Oct 2012 12:31:16 +0000 (15:31 +0300)]
ASoC: omap-abe-twl6040: Fix typo of Vibrator

It is not Vinrator but Vibrator.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoASoC: twl6040: Fix Stream DAPM mapping
Peter Ujfalusi [Thu, 4 Oct 2012 11:15:02 +0000 (14:15 +0300)]
ASoC: twl6040: Fix Stream DAPM mapping

Fixes commit: 805238b ASoC: twl6040: Convert to use DAI DAPM widgets
where the connection between the stream widgets and the ADC widgets was
reversed and because of this on capture the DAPM is not powering up the
codec.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoASoC: codecs: Add DA9055 codec driver
Ashish Chavan [Fri, 21 Sep 2012 14:46:17 +0000 (20:16 +0530)]
ASoC: codecs: Add DA9055 codec driver

This patch adds support for Dialog semiconductor's DA9055 audio codec.

This has been tested on DA9055 EVB with Samsung SMDK6410 board.

Signed-off-by: Ashish Chavan <ashish.chavan@kpitcummins.com>
Signed-off-by: David Dajun Chen <david.chen@diasemi.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoASoC: eukrea-tlv320: Convert it to platform driver
Fabio Estevam [Sat, 22 Sep 2012 15:27:31 +0000 (12:27 -0300)]
ASoC: eukrea-tlv320: Convert it to platform driver

Convert eukrea-tlv320 to platform driver.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoALSA: ASoC: add DT bindings for CS4271
Daniel Mack [Thu, 27 Sep 2012 23:36:44 +0000 (01:36 +0200)]
ALSA: ASoC: add DT bindings for CS4271

Apart from pure matching, the bindings also support setting the the
reset gpio line.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Cc: Alexander Sverdlin <subaparts@yandex.ru>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoASoC: wm_hubs: Ensure volume updates are handled during class W startup
Mark Brown [Thu, 27 Sep 2012 17:35:24 +0000 (18:35 +0100)]
ASoC: wm_hubs: Ensure volume updates are handled during class W startup

In some circumstances we may need to flush volume updates to the device
after switching to class W mode. Do this unconditionally to ensure that
these situations are handled.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org
8 years agoASoC: wm5110: Adding missing volume update bits
Charles Keepax [Thu, 27 Sep 2012 12:21:48 +0000 (13:21 +0100)]
ASoC: wm5110: Adding missing volume update bits

The volume update bits were being set on all but one input and one output.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org
8 years agoASoC: wm5110: Add OUT3R support
Mark Brown [Wed, 26 Sep 2012 16:52:36 +0000 (17:52 +0100)]
ASoC: wm5110: Add OUT3R support

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoASoC: wm5110: Add AEC loopback support
Mark Brown [Sun, 26 Aug 2012 20:51:27 +0000 (13:51 -0700)]
ASoC: wm5110: Add AEC loopback support

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoASoC: wm5110: Rename EPOUT to HPOUT3
Mark Brown [Sun, 26 Aug 2012 20:50:48 +0000 (13:50 -0700)]
ASoC: wm5110: Rename EPOUT to HPOUT3

The third output on WM5110 is a general purpose headphone output which can
be used to drive an earpice rather than a dedicated earpiece driver.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoASoC: arizona: Add more clock rates
Mark Brown [Wed, 26 Sep 2012 16:50:02 +0000 (17:50 +0100)]
ASoC: arizona: Add more clock rates

Some devices support additional clock rates.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoASoC: arizona: Add more DSP options for mixer input muxes
Mark Brown [Wed, 26 Sep 2012 15:43:44 +0000 (16:43 +0100)]
ASoC: arizona: Add more DSP options for mixer input muxes

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoASoC: wm0010: Initialise chip state before we register the interrupt
Mark Brown [Tue, 25 Sep 2012 18:04:25 +0000 (19:04 +0100)]
ASoC: wm0010: Initialise chip state before we register the interrupt

The interrupt handler uses the chip state.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoASoC: wm0010: Don't check if reset GPIO is defined when removing
Mark Brown [Tue, 25 Sep 2012 15:36:56 +0000 (16:36 +0100)]
ASoC: wm0010: Don't check if reset GPIO is defined when removing

We will fail to probe without one.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoASoC: wm0010: Allow slow GPIO for reset
Mark Brown [Tue, 25 Sep 2012 15:35:26 +0000 (16:35 +0100)]
ASoC: wm0010: Allow slow GPIO for reset

We never set the GPIO from atomic context so there's no reason why we
can't support a GPIO that needs to sleep when configuring.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoASoC: wm5110: Enable bypass mode for MICVDD
Mark Brown [Fri, 7 Sep 2012 04:58:54 +0000 (12:58 +0800)]
ASoC: wm5110: Enable bypass mode for MICVDD

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoASoC: wm5102: Enable bypass mode for MICVDD
Mark Brown [Fri, 7 Sep 2012 04:58:43 +0000 (12:58 +0800)]
ASoC: wm5102: Enable bypass mode for MICVDD

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoASoC: dapm: Allow regulators to bypass as well as disable when idle
Mark Brown [Fri, 7 Sep 2012 04:57:11 +0000 (12:57 +0800)]
ASoC: dapm: Allow regulators to bypass as well as disable when idle

Allow regulators managed via DAPM to make use of the bypass support that
has recently been added to the regulator API by setting a flag
SND_SOC_DAPM_REGULATOR_BYPASS. When this flag is set the regulator will
be put into bypass mode before being disabled, allowing the regulator to
fall into bypass mode if it can't be disabled due to other users.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoMerge tag 'bypass' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator...
Mark Brown [Wed, 26 Sep 2012 11:29:31 +0000 (12:29 +0100)]
Merge tag 'bypass' of git://git./linux/kernel/git/broonie/regulator into for-3.7

regulator: Bypass mode support

Allow regulators to be put into a non-regulating mode bypassing the
input straight to the output, mostly used by low power retention modes.

8 years agoASoC: cs4270: Remove mono support
Fabio Estevam [Tue, 18 Sep 2012 16:03:54 +0000 (13:03 -0300)]
ASoC: cs4270: Remove mono support

According to cs4270 datasheet, there is no reference to mono mode.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoMerge remote-tracking branch 'asoc/topic/ux500' into for-3.7
Mark Brown [Sat, 22 Sep 2012 22:47:58 +0000 (18:47 -0400)]
Merge remote-tracking branch 'asoc/topic/ux500' into for-3.7

8 years agoASoC: wm2000: Add regulator support
Mark Brown [Sat, 22 Sep 2012 22:33:23 +0000 (18:33 -0400)]
ASoC: wm2000: Add regulator support

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoASoC: wm2000: Convert to devm_regmap_init_i2c()
Mark Brown [Sat, 22 Sep 2012 22:32:08 +0000 (18:32 -0400)]
ASoC: wm2000: Convert to devm_regmap_init_i2c()

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoMerge tag 'v3.6-rc6' into for-3.7
Mark Brown [Sat, 22 Sep 2012 15:26:27 +0000 (11:26 -0400)]
Merge tag 'v3.6-rc6' into for-3.7

Linux 3.6-rc6 has all our bug fixes.

Conflicts (trivial overlap):
sound/soc/omap/am3517evm.c

8 years agoASoC: twl4030: Support for DT booted kernel
Peter Ujfalusi [Mon, 10 Sep 2012 10:46:32 +0000 (13:46 +0300)]
ASoC: twl4030: Support for DT booted kernel

When the kernel has been booted with DT blob the platform data is NULL for
the driver.
We need to construct the pdata based on the DT information for runtime use.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoASoC: twl4030: Add pointer to pdata within the private data
Peter Ujfalusi [Mon, 10 Sep 2012 10:46:31 +0000 (13:46 +0300)]
ASoC: twl4030: Add pointer to pdata within the private data

Access the pdata via a pointer within the twl4030_priv structure.
In preparation for DeviceTree support.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoASoC: twl4030: Convert to use devm_kzalloc
Peter Ujfalusi [Mon, 10 Sep 2012 10:46:30 +0000 (13:46 +0300)]
ASoC: twl4030: Convert to use devm_kzalloc

Allocate the private data with devm_kzalloc.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoASoC/mfd: twl4030: Remove set_hs_extmute callback from platform data
Peter Ujfalusi [Mon, 10 Sep 2012 10:46:29 +0000 (13:46 +0300)]
ASoC/mfd: twl4030: Remove set_hs_extmute callback from platform data

We no longer have users for the set_hs_extmute callback which has been
replaced by hs_extmute_gpio so the codec driver can handle the external
mute if it is needed by the board.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoARM: OMAP/ASoC: Zoom2: Let the codec to handle the hs_extmute GPIO
Peter Ujfalusi [Mon, 10 Sep 2012 10:46:28 +0000 (13:46 +0300)]
ARM: OMAP/ASoC: Zoom2: Let the codec to handle the hs_extmute GPIO

Remove the use of set_hs_extmute callback and let the codec driver to
handle the extmute GPIO.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoASoC: twl4030: Move hs_extmute GPIO handling to driver
Peter Ujfalusi [Mon, 10 Sep 2012 10:46:27 +0000 (13:46 +0300)]
ASoC: twl4030: Move hs_extmute GPIO handling to driver

The external mute (if it is in use) is handled by a GPIO line. Prepare to
remove the set_hs_extmute callback and replace it with:
hs_extmute_gpio: the GPIO number to use for external mute

When the users of set_hs_extmute has been converted the callback can be removed.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoInput: twl4030-vibra: Support for DT booted kernel
Peter Ujfalusi [Mon, 10 Sep 2012 10:46:26 +0000 (13:46 +0300)]
Input: twl4030-vibra: Support for DT booted kernel

Add support when the kernel has been booted with DT blob. In this case the
pdata is NULL, we need to reach up to the core node and check if the codec
part has been enabled to determine if we need to coexist with the codec or
not.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agomfd: twl4030-audio: Add DT support
Peter Ujfalusi [Mon, 10 Sep 2012 10:46:25 +0000 (13:46 +0300)]
mfd: twl4030-audio: Add DT support

Support for loading the twl4030 audio module via devicetree.
Sub devices for codec and vibra will be created as mfd devices once the
core MFD driver is loaded when the kernel is booted with a DT blob.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agodt: Add empty of_find_node_by_name() function
Peter Ujfalusi [Mon, 10 Sep 2012 10:46:24 +0000 (13:46 +0300)]
dt: Add empty of_find_node_by_name() function

This commit adds an empty of_find_node_by_name() function for !CONFIG_OF
builds.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agomfd: twl4030-audio: Get audio MCLK via twl-core API instead of pdata
Peter Ujfalusi [Mon, 10 Sep 2012 10:46:23 +0000 (13:46 +0300)]
mfd: twl4030-audio: Get audio MCLK via twl-core API instead of pdata

twl-core has API to get the boot time configured HFCLK rate which has the
same rate as the audio MCLK.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agomfd: twl-core: Add API to query the HFCLK rate
Peter Ujfalusi [Mon, 10 Sep 2012 10:46:22 +0000 (13:46 +0300)]
mfd: twl-core: Add API to query the HFCLK rate

CFG_BOOT register's HFCLK_FREQ field hold information about the used HFCLK
frequency.
Add possibility for users to get the configured rate based on this
register.
This register was configured during boot, without it the chip would not
operate correctly, so we can trust on this information.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agomfd: twl4030-audio: Rearange and clean-up the probe function
Peter Ujfalusi [Mon, 10 Sep 2012 10:46:21 +0000 (13:46 +0300)]
mfd: twl4030-audio: Rearange and clean-up the probe function

To facilitate the device tree support the probe function need to be rearanged.
Small cleanup in the APLL frequency selection part as well.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agomfd: twl4030-audio: Convert to use devm_kzalloc
Peter Ujfalusi [Mon, 10 Sep 2012 10:46:20 +0000 (13:46 +0300)]
mfd: twl4030-audio: Convert to use devm_kzalloc

To clean up the module probe and remove functions.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agomfd: twl4030-audio: Clean up MODULE_* and platform_driver part
Peter Ujfalusi [Mon, 10 Sep 2012 10:46:19 +0000 (13:46 +0300)]
mfd: twl4030-audio: Clean up MODULE_* and platform_driver part

Place the MODULE_* lines in the same block and add MODULE_DESCRIPTION.
Rearange the platform_driver structure at the same time.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoASoC: omap-pcm: Convert to use dmaengine
Peter Ujfalusi [Fri, 14 Sep 2012 12:05:58 +0000 (15:05 +0300)]
ASoC: omap-pcm: Convert to use dmaengine

Original author: Russell King <rmk+kernel@arm.linux.org.uk>

Switch the omap-pcm to use dmaengine.
Certain features are not supported by after dmaengine conversion:
1. No period wakeup mode
   DMA engine has no way to communicate this information through
   standard channels.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoASoC: OMAP: mcbsp, mcpdm, dmic, hdmi: Set dma_data at startup time
Peter Ujfalusi [Fri, 14 Sep 2012 12:05:57 +0000 (15:05 +0300)]
ASoC: OMAP: mcbsp, mcpdm, dmic, hdmi: Set dma_data at startup time

Set the dma_data for the stream (snd_soc_dai_set_dma_data) at dai_startup
time so omap-pcm will have access to the needed information regarding to
the DMA channel earlier.
This is needed for the clean dmaengine support.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoASoC: omap-pcm, omap-dmic: Change the use of omap_pcm_dma_data->data_type
Peter Ujfalusi [Fri, 14 Sep 2012 12:05:56 +0000 (15:05 +0300)]
ASoC: omap-pcm, omap-dmic: Change the use of omap_pcm_dma_data->data_type

Instead of the OMAP DMA data type definition the data_type will be used to
specify the number of bits the DMA word should be configured or 0 in case
when based on the stream's format the omap-pcm can decide the needed DMA
word size.
This feature is needed for the omap-hdmi where the sDMA need to be
configured for 32bit word type regardless of the audio format used.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoASoC: OMAP: mcbsp, mcpdm, dmic: Let omap-pcm to pick the dma_type
Peter Ujfalusi [Fri, 14 Sep 2012 12:05:55 +0000 (15:05 +0300)]
ASoC: OMAP: mcbsp, mcpdm, dmic: Let omap-pcm to pick the dma_type

omap-pcm can figure out the correct dma_type based on the stream's format.
In this way we can get rid of the plat/dma.h include from these drivers.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoASoC: omap-mcpdm: Use platform_get_resource_* to get resources
Peter Ujfalusi [Fri, 14 Sep 2012 12:05:54 +0000 (15:05 +0300)]
ASoC: omap-mcpdm: Use platform_get_resource_* to get resources

Get the needed resources in a correct way and avoid using defines for them.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoARM: OMAP4: hwmod_data: Add resource names to McPDM memory ranges
Peter Ujfalusi [Fri, 14 Sep 2012 12:05:53 +0000 (15:05 +0300)]
ARM: OMAP4: hwmod_data: Add resource names to McPDM memory ranges

To help the driver to get the correct memory range to access McPDM
registers.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoASoC: omap-pcm: Prepare to configure the DMA data_type based on stream properties
Peter Ujfalusi [Fri, 14 Sep 2012 12:05:52 +0000 (15:05 +0300)]
ASoC: omap-pcm: Prepare to configure the DMA data_type based on stream properties

Based on the format of the stream the omap-pcm can decide alone what data
type should be used with by the sDMA.
Keep the possibility for OMAP dai drivers to tell omap-pcm if they want to
use different data type. This is needed for the omap-hdmi for example which
needs 32bit data type even if the stream format is S16_LE.

The check if (dma_data->data_type) is safe at the moment since omap-pcm
does not support 8bit samples (OMAP_DMA_DATA_TYPE_S8 == 0x00).

The next step is to redefine the meaning of dma_data->data_type to unblock
this limitation.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoASoC: OMAP: Remove sync_mode from omap_pcm_dma_data struct
Peter Ujfalusi [Fri, 14 Sep 2012 12:05:51 +0000 (15:05 +0300)]
ASoC: OMAP: Remove sync_mode from omap_pcm_dma_data struct

The omap-pcm platform driver no longer needs this parameter to select
between ELEMENT and PACKET mode. The selection is based on the configured
packet_size.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoASoC: omap-pcm: Select sDMA synchronization based on packet_size
Peter Ujfalusi [Fri, 14 Sep 2012 12:05:50 +0000 (15:05 +0300)]
ASoC: omap-pcm: Select sDMA synchronization based on packet_size

Since we only have element or packet synchronization we can use the
dma_data->packet_size to select the desired mode:
if packet_size is 0 we use ELEMENT mode
if packet_size is not 0 we use PACKET mode for sDMA synchronization.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoASoC: omap-mcbsp: Use sDMA packet mode instead of frame mode
Peter Ujfalusi [Fri, 14 Sep 2012 12:05:49 +0000 (15:05 +0300)]
ASoC: omap-mcbsp: Use sDMA packet mode instead of frame mode

When McBSP is configured in threshold mode we can use sDMA packet mode in
all cases.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agodmaengine: omap-dma: Add support to suppress interrupts in cyclic mode
Peter Ujfalusi [Fri, 14 Sep 2012 12:05:48 +0000 (15:05 +0300)]
dmaengine: omap-dma: Add support to suppress interrupts in cyclic mode

When requested (DMA_PREP_INTERRUPT is cleared in flags) disable all DMA
interrupts for the channel. In this mode user space does not expect
periodic reports from kernel about the progress of the audio stream.
PulseAudio for example support this type of mode.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Vinod Koul <vinod.koul@linux.intel.com>
Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agodmaengine: Pass flags via device_prep_dma_cyclic() callback
Peter Ujfalusi [Fri, 14 Sep 2012 12:05:47 +0000 (15:05 +0300)]
dmaengine: Pass flags via device_prep_dma_cyclic() callback

Change the parameter list of device_prep_dma_cyclic() so the DMA drivers
can receive the flags coming from clients.
This feature can be used during audio operation to disable all audio
related interrupts when the DMA_PREP_INTERRUPT is cleared from the flags.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Vinod Koul <vinod.koul@linux.intel.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agodmaengine: omap: Add support for pause/resume in cyclic dma mode
Peter Ujfalusi [Fri, 14 Sep 2012 12:05:45 +0000 (15:05 +0300)]
dmaengine: omap: Add support for pause/resume in cyclic dma mode

The audio stack used omap_stop_dma/omap_start_dma to pause/resume the DMA.
This method has been used for years on OMAP based products.
We only allow pause/resume when the DMA has been configured in cyclic mode
which is used by the audio stack.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Vinod Koul <vinod.koul@linux.intel.com>
Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agodmaengine: omap: Support for element mode in cyclic DMA
Peter Ujfalusi [Fri, 14 Sep 2012 12:05:44 +0000 (15:05 +0300)]
dmaengine: omap: Support for element mode in cyclic DMA

When src_maxburst/dst_maxburst is set to 0 by the users of cyclic DMA
(mostly audio) indicates that we should configure the omap DMA to element
sync mode instead of packet mode.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Vinod Koul <vinod.koul@linux.intel.com>
Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoASoC: fsl: register the wm9712-codec
Eric Millbrandt [Thu, 20 Sep 2012 14:36:45 +0000 (10:36 -0400)]
ASoC: fsl: register the wm9712-codec

The mpc5200-psc-ac97 driver does not enumerate attached ac97 devices, so
register the device here.

Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoASoC: fsl: pcm030-audio-fabric use snd_soc_register_card
Eric Millbrandt [Thu, 20 Sep 2012 14:36:44 +0000 (10:36 -0400)]
ASoC: fsl: pcm030-audio-fabric use snd_soc_register_card

Convert pcm030-audio-fabric to use the new snd_soc_register_card api
instead of the older method of registering a separate platform device.
Create the dai_link to the mpc5200_psc_ac97 platform using the device tree.
Convert the pcm030-audio-fabric driver to a platform-driver and add a
remove function.

Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoASoC: fsl: add PPC_MPC52xx dependency to SND_POWERPC_SOC
Eric Millbrandt [Thu, 20 Sep 2012 14:36:43 +0000 (10:36 -0400)]
ASoC: fsl: add PPC_MPC52xx dependency to SND_POWERPC_SOC

mpc52xx socs do not define FSL_SOC but need SND_POWERPC_SOC defined to build
ASoC drivers.

Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoASoC: twl6040: Convert to use DAI DAPM widgets
Peter Ujfalusi [Thu, 20 Sep 2012 13:32:15 +0000 (16:32 +0300)]
ASoC: twl6040: Convert to use DAI DAPM widgets

Use DAPM mapping for stream events and give unique names for the streams.
This change also fixes the following warning:
twl6040-codec twl6040-codec: Failed to create Capture debugfs file

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoASoC: twl4030: Convert to use DAI DAPM widgets
Peter Ujfalusi [Thu, 20 Sep 2012 13:32:02 +0000 (16:32 +0300)]
ASoC: twl4030: Convert to use DAI DAPM widgets

Use DAPM mapping for stream events and give unique names for the streams.
This change also fixes the following warning:
twl4030-codec twl4030-codec: Failed to create Capture debugfs file

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoASoC: wm8960: remove 'dres' field from platform data structure
Timur Tabi [Thu, 20 Sep 2012 18:57:27 +0000 (13:57 -0500)]
ASoC: wm8960: remove 'dres' field from platform data structure

The 'dres' field (discharge resistance for headphone outputs) is no longer
used in the driver, so remove it.

It was used in the original version of the driver when entering standby
from off, but we stopped using it when we switched from having a single
startup sequence to having separate cap and capless sequences.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoDocumentation: Define the MSP Driver Device Tree bindings
Lee Jones [Tue, 31 Jul 2012 10:59:21 +0000 (11:59 +0100)]
Documentation: Define the MSP Driver Device Tree bindings

Here we add the required documentation for the new Device Tree
bindings pertaining to the MSP CPU-side DAI Driver.

Acked-by: Ola Lilja <ola.o.lilja@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
8 years agoDocumentation: Define the MOP500 Audio Machine Driver Device Tree bindings
Lee Jones [Tue, 31 Jul 2012 10:56:51 +0000 (11:56 +0100)]
Documentation: Define the MOP500 Audio Machine Driver Device Tree bindings

Here we add the required documentation for the new Device Tree
bindings pertaining to the MOP500 Audio Machine driver.

Acked-by: Ola Lilja <ola.o.lilja@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
8 years agoASoC: Ux500: Minor coding layout changes
Lee Jones [Tue, 21 Aug 2012 09:06:44 +0000 (10:06 +0100)]
ASoC: Ux500: Minor coding layout changes

Includes removal of duplicate debug print affirming entry into
the probe function, an unnecessary line break of a coding line
<80 chars and a white space change (unintentional tab).

Acked-by: Ola Lilja <ola.o.lilja@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
8 years agoASoC: codecs: Enable AB8500 CODEC for Device Tree
Lee Jones [Fri, 27 Jul 2012 07:50:05 +0000 (08:50 +0100)]
ASoC: codecs: Enable AB8500 CODEC for Device Tree

We continue to allow the AB8500 CODEC to be registered via the AB8500
Multi Functional Device API, only this time we extract its configuration
from the Device Tree binary.

Acked-by: Ola Lilja <ola.o.lilja@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
8 years agoASoC: Ux500: Enable ux500 MSP driver for Device Tree
Lee Jones [Thu, 26 Jul 2012 16:07:26 +0000 (17:07 +0100)]
ASoC: Ux500: Enable ux500 MSP driver for Device Tree

Register both parts of the MSP driver from Device Tree so that they
are probed when Device Tree is enabled. Also, as there is platform
data involved, we ensure that there is allocated memory to place the
configuration into and that the correct information is extracted from
the DT binary.

Acked-by: Ola Lilja <ola.o.lilja@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
8 years agoASoC: Ux500: Enable MOP500 driver for Device Tree
Lee Jones [Thu, 26 Jul 2012 15:48:34 +0000 (16:48 +0100)]
ASoC: Ux500: Enable MOP500 driver for Device Tree

Here we ensure that the MOP500 audio driver will be probed during a
Device Tree boot. We also parse the sound node to link together the
codec, dma and the CPU-side Digital Audio Interface.

Acked-by: Ola Lilja <ola.o.lilja@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
8 years agoASoC: Ux500: Move MSP pinctrl setup into the MSP driver
Lee Jones [Fri, 14 Sep 2012 15:16:08 +0000 (16:16 +0100)]
ASoC: Ux500: Move MSP pinctrl setup into the MSP driver

In the initial submission of the MSP driver msp1 and msp3's associated
pinctrl mechanism was passed back to platform code using a plat_init()
call-back routine, but it has no place in platform code. The MSP driver
should set this up for the appropriate ports. Instead we use a use_pinctrl
identifier which is passed from platform_data/Device Tree which indicates
which ports should use pinctrl.

Acked-by: Ola Lilja <ola.o.lilja@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
8 years agoASoC: wm8961: Move device identification and reset to I2C probe
Mark Brown [Thu, 13 Sep 2012 05:31:38 +0000 (13:31 +0800)]
ASoC: wm8961: Move device identification and reset to I2C probe

This is more idiomatic as it means we verify that the device is there
prior to trying to do the card probe.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoASoC: wm8961: Convert to direct regmap API usage
Mark Brown [Thu, 13 Sep 2012 04:53:59 +0000 (12:53 +0800)]
ASoC: wm8961: Convert to direct regmap API usage

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoASoC: wm8960: Support shared LRCLK
Mark Brown [Thu, 13 Sep 2012 03:46:58 +0000 (11:46 +0800)]
ASoC: wm8960: Support shared LRCLK

If the LRCLK is shared and the WM8960 is clock master then we should
enable the LRCM bit to tell the device that it should drive LRCLK when
either ADC or DAC is enabled rather than separately driving the two
LRCLKs.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoASoC: wm8776: Convert to direct regmap API usage
Mark Brown [Wed, 12 Sep 2012 12:15:22 +0000 (20:15 +0800)]
ASoC: wm8776: Convert to direct regmap API usage

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoASoC: fsl: cleanup headers in pcm030-audio-fabric
Eric Millbrandt [Thu, 13 Sep 2012 21:43:13 +0000 (17:43 -0400)]
ASoC: fsl: cleanup headers in pcm030-audio-fabric

Remove unreferenced header files.

Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoASoC: fsl: mpc5200 add missing information to snd_soc_dai_driver
Eric Millbrandt [Thu, 13 Sep 2012 21:43:12 +0000 (17:43 -0400)]
ASoC: fsl: mpc5200 add missing information to snd_soc_dai_driver

Add missing dai_driver information to avoid these runtime errors

[   16.433788] asoc: error - multiple DAI f0002c00.i2s registered with no name
[   16.453551] Failed to register DAI
[   16.461222] mpc5200-psc-i2s: probe of f0002c00.i2s failed with error -22
[   16.475242] asoc: error - multiple DAI f0002000.ac97 registered with no name
[   16.488087] mpc5200-psc-ac97 f0002000.ac97: Failed to register DAI
[   16.502222] mpc5200-psc-ac97: probe of f0002000.ac97 failed with error -22

Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoASoC: fsl: mpc5200 combine psc_dma platform data
Eric Millbrandt [Thu, 13 Sep 2012 21:43:11 +0000 (17:43 -0400)]
ASoC: fsl: mpc5200 combine psc_dma platform data

The mpc5200_psc_ac97 and mpc5200_psc_i2s modules rely on shared platform data
with mpc5200_dma.

Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoASoC: imx-audmux: remove null check of audmux_base in audmux_read_file
Richard Zhao [Tue, 18 Sep 2012 08:38:30 +0000 (16:38 +0800)]
ASoC: imx-audmux: remove null check of audmux_base in audmux_read_file

When audmux_read_file is called, it means the driver is already
initialised successfully, so we don't need to check audmux_base.

It also fix smatch warning:
sound/soc/fsl/imx-audmux.c:78 audmux_read_file() warn: possible memory leak of 'buf'

Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoASoC: imx-pcm-dma: open function failed when snd_dmaengine_pcm_open fail
Richard Zhao [Tue, 18 Sep 2012 09:20:06 +0000 (17:20 +0800)]
ASoC: imx-pcm-dma: open function failed when snd_dmaengine_pcm_open fail

snd_imx_open should return error code returned by snd_dmaengine_pcm_open.

Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoASoC: imx-pcm-dma: check kzalloc return value in function snd_imx_open
Richard Zhao [Tue, 18 Sep 2012 09:20:05 +0000 (17:20 +0800)]
ASoC: imx-pcm-dma: check kzalloc return value in function snd_imx_open

It fixed smatch warning:
sound/soc/fsl/imx-pcm-dma.c:112 snd_imx_open() error: potential null dereference 'dma_data'.  (kzalloc returns null)

Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoASoC: Avoid recalculating the bitmask for SOC_ENUM controls
Lars-Peter Clausen [Fri, 14 Sep 2012 11:57:27 +0000 (13:57 +0200)]
ASoC: Avoid recalculating the bitmask for SOC_ENUM controls

For ENUM controls the bitmask is calculated based on the number of items.
Currently this is done each time the control is accessed. And while the
performance impact of this should be negligible we can easily do better. The
roundup_pow_of_two macro performs the same calculation which is currently done
manually, but it is also possible to use this macro with compile time constants
and so it can be used to initialize static data. So we can use it to initialize
the mask field of a ENUM control during its declaration.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoASoC: wm8960: add support for big-endian audio samples
Timur Tabi [Fri, 14 Sep 2012 21:14:37 +0000 (16:14 -0500)]
ASoC: wm8960: add support for big-endian audio samples

PowerPC ASoC drivers frequently use the _BE variants of the SNDRV_PCM_FORMAT
macros, so we need to look for those as well.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoASoC: fsl: remove unnecessary call to dma_unmap_single
Timur Tabi [Fri, 14 Sep 2012 21:14:36 +0000 (16:14 -0500)]
ASoC: fsl: remove unnecessary call to dma_unmap_single

Remove a call to dma_unmap_single() from the PowerPC ASoC DMA driver.  The
buffer is allocated and not actually mapped, so the unmap call doesn't
make sense.  It was probably left over from some early version of the driver.

This bug was unnoticed for so long because the DMA mapping functions normally
don't do anything on PowerPC.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoASoC: fsl: use snd_soc_register_card to register the card
Timur Tabi [Fri, 14 Sep 2012 21:14:34 +0000 (16:14 -0500)]
ASoC: fsl: use snd_soc_register_card to register the card

Use snd_soc_register_card() instead of platform_device_alloc("soc-audio")
to register the sound card from the machine drivers.  The use of
platform_device_alloc is deprecated.

Although several other drivers still use platform_device_alloc(), the
Freescale drivers were not using it to pass driver data.  Instead of fixing
the driver data usage, it's better to replace the deprecated code.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoASoC: mx27vis: retrieve gpio numbers from platform_data
Shawn Guo [Mon, 17 Sep 2012 05:34:31 +0000 (13:34 +0800)]
ASoC: mx27vis: retrieve gpio numbers from platform_data

Rather than including mach/iomux-mx27.h to define gpio numbers and set
up the pins, the patch moves all these into machine code and has the
gpio numbers passed to driver via platform_data.  As the result, we
can remove the mach/iomux-mx27.h inclusion from driver.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Javier Martin <javier.martin@vista-silicon.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 years agoLinux 3.6-rc6
Linus Torvalds [Sun, 16 Sep 2012 21:58:51 +0000 (14:58 -0700)]
Linux 3.6-rc6

8 years agoMerge tag 'mfd-for-linus-3.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sun, 16 Sep 2012 20:22:21 +0000 (13:22 -0700)]
Merge tag 'mfd-for-linus-3.6-2' of git://git./linux/kernel/git/sameo/mfd-2.6

Pull mfd fixes from Samuel Ortiz:
 "This is the remaining MFD fixes for 3.6, with 5 pending fixes:

   - A tps65217 build error fix.
   - A lcp_ich regression fix caused by the MFD driver failing to
     initialize the watchdog sub device due to ACPI conflicts.
   - 2 MAX77693 interrupt handling bug fixes.
   - An MFD core fix, adding an IRQ domain argument to the MFD device
     addition API in order to prevent silent and potentially harmful
     remapping behaviour changes for drivers supporting non-DT
     platforms."

* tag 'mfd-for-linus-3.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6:
  mfd: MAX77693: Fix NULL pointer error when initializing irqs
  mfd: MAX77693: Fix interrupt handling bug
  mfd: core: Push irqdomain mapping out into devices
  mfd: lpc_ich: Fix a 3.5 kernel regression for iTCO_wdt driver
  mfd: Move tps65217 regulator plat data handling to regulator

8 years agoMerge tag 'for-3.6-rc6' of git://gitorious.org/linux-pwm/linux-pwm
Linus Torvalds [Sun, 16 Sep 2012 20:20:43 +0000 (13:20 -0700)]
Merge tag 'for-3.6-rc6' of git://gitorious.org/linux-pwm/linux-pwm

Pull pwm fixes from Thierry Reding:
 "While this comes a bit later than I had wished, both patches are
  rather minor and touch only new drivers so I think these are still
  safe for merging."

* tag 'for-3.6-rc6' of git://gitorious.org/linux-pwm/linux-pwm:
  pwm: pwm-tiehrpwm: Fix conflicting channel period setting
  pwm: pwm-tiecap: Disable APWM mode after configure