~shefty/rdma-dev.git
12 years agoipv6: Fix warning in addrconf code.
David Miller [Mon, 21 Jul 2008 01:17:02 +0000 (18:17 -0700)]
ipv6: Fix warning in addrconf code.

Reported by Linus.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Mon, 21 Jul 2008 04:17:20 +0000 (21:17 -0700)]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  pkt_sched: Fix build with NET_SCHED disabled.

12 years agoMerge branch 'for-linus' of git://git.o-hand.com/linux-mfd
Linus Torvalds [Mon, 21 Jul 2008 04:16:27 +0000 (21:16 -0700)]
Merge branch 'for-linus' of git://git.o-hand.com/linux-mfd

* 'for-linus' of git://git.o-hand.com/linux-mfd:
  mfd: let asic3 use mem resource instead of bus_shift
  mfd: remove DS1WM register definitions from asic3.h
  mfd: add ASIC3_CONFIG_GPIO templates
  mfd: fix the asic3 irq demux code
  mfd: asic3 should depend on gpiolib
  mfd: fix asic3 config array initialisation
  mfd: move asic3 probe functions into __init section
  mfd: Use uppercase only for asic3 macros and defines
  mfd: use dev_* macros for asic3 debugging
  mfd: New asic3 gpio configuration code
  mfd: asic3 children platform data removal
  mfd: asic3 gpiolib support

12 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb
Linus Torvalds [Mon, 21 Jul 2008 04:14:42 +0000 (21:14 -0700)]
Merge git://git./linux/kernel/git/mchehab/v4l-dvb

* git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (277 commits)
  V4L/DVB (8415): gspca: Infinite loop in i2c_w() of etoms.
  V4L/DVB (8414): videodev/cx18: fix get_index bug and error-handling lock-ups
  V4L/DVB (8411): videobuf-dma-contig.c: fix 64-bit build for pre-2.6.24 kernels
  V4L/DVB (8410): sh_mobile_ceu_camera: fix 64-bit compiler warnings
  V4L/DVB (8397): video: convert select VIDEO_ZORAN_ZR36060 into depends on
  V4L/DVB (8396): video: Fix Kbuild dependency for VIDEO_IR_I2C
  V4L/DVB (8395): saa7134: Fix Kbuild dependency of ir-kbd-i2c
  V4L/DVB (8394): ir-common: CodingStyle fix: move EXPORT_SYMBOL_GPL to their proper places
  V4L/DVB (8393): media/video: Fix depencencies for VIDEOBUF
  V4L/DVB (8392): media/Kconfig: Convert V4L1_COMPAT select into "depends on"
  V4L/DVB (8390): videodev: add comment and remove magic number.
  V4L/DVB (8389): videodev: simplify get_index()
  V4L/DVB (8387): Some cosmetic changes
  V4L/DVB (8381): ov7670: fix compile warnings
  V4L/DVB (8380): saa7115: use saa7115_auto instead of saa711x as the autodetect driver name.
  V4L/DVB (8379): saa7127: Make device detection optional
  V4L/DVB (8378): cx18: move cx18_av_vbi_setup to av-core.c and rename to cx18_av_std_setup
  V4L/DVB (8377): ivtv/cx18: ensure the default control values are correct
  V4L/DVB (8376): cx25840: move cx25840_vbi_setup to core.c and rename to cx25840_std_setup
  V4L/DVB (8374): gspca: No conflict of 0c45:6011 with the sn9c102 driver.
  ...

12 years agoMerge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
Linus Torvalds [Mon, 21 Jul 2008 04:14:00 +0000 (21:14 -0700)]
Merge branch 'upstream' of git://ftp.linux-mips.org/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (21 commits)
  [MIPS] Remove unused maltasmp.h.
  [MIPS] Remove unused saa9730_uart.h.
  [MIPS] Rename MIPS sys_pipe syscall entry point to something MIPS-specific.
  [MIPS] 32-bit compat: Delete unused sys_truncate64 and sys_ftruncate64.
  [MIPS] TXx9: Fix some sparse warnings
  [MIPS] TXx9: Add 64-bit support
  [MIPS] TXx9: Cleanups for 64-bit support
  [MIPS] Cobalt: Fix I/O port resource range
  [MIPS] don't leak setup_early_printk() in userspace header
  [MIPS] Remove include/asm-mips/mips-boards/sead{,int}.h
  [MIPS] Remove asm-mips/mips-boards/atlas{,int}.h
  [MIPS] mips/sgi-ip22/ip28-berr.c: fix the build
  [MIPS] TXx9: Miscellaneous build fixes
  [MIPS] Routerboard 532: Support for base system
  [MIPS] IP32: Use common SGI button driver
  [MIPS] IP22: Use common SGI button driver
  [MIPS] IP22, IP28: Fix merge bug
  [MIPS] Tinker with constraints in <asm/atomic.h> to fix build error.
  [MIPS] Add missing prototypes to asm/page.h
  [MIPS] Fix missing prototypes in asm/fpu.h
  ...

12 years agoMerge branch 'kvm-updates-2.6.27' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Mon, 21 Jul 2008 04:13:26 +0000 (21:13 -0700)]
Merge branch 'kvm-updates-2.6.27' of git://git./linux/kernel/git/avi/kvm

* 'kvm-updates-2.6.27' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm: (70 commits)
  KVM: Adjust smp_call_function_mask() callers to new requirements
  KVM: MMU: Fix potential race setting upper shadow ptes on nonpae hosts
  KVM: x86 emulator: emulate clflush
  KVM: MMU: improve invalid shadow root page handling
  KVM: MMU: nuke shadowed pgtable pages and ptes on memslot destruction
  KVM: Prefix some x86 low level function with kvm_, to avoid namespace issues
  KVM: check injected pic irq within valid pic irqs
  KVM: x86 emulator: Fix HLT instruction
  KVM: Apply the kernel sigmask to vcpus blocked due to being uninitialized
  KVM: VMX: Add ept_sync_context in flush_tlb
  KVM: mmu_shrink: kvm_mmu_zap_page requires slots_lock to be held
  x86: KVM guest: make kvm_smp_prepare_boot_cpu() static
  KVM: SVM: fix suspend/resume support
  KVM: s390: rename private structures
  KVM: s390: Set guest storage limit and offset to sane values
  KVM: Fix memory leak on guest exit
  KVM: s390: dont allocate dirty bitmap
  KVM: move slots_lock acquision down to vapic_exit
  KVM: VMX: Fake emulate Intel perfctr MSRs
  KVM: VMX: Fix a wrong usage of vmcs_config
  ...

12 years agopkt_sched: Fix build with NET_SCHED disabled.
David S. Miller [Mon, 21 Jul 2008 01:13:01 +0000 (18:13 -0700)]
pkt_sched: Fix build with NET_SCHED disabled.

The stab bits can't be referenced uniless the full
packet scheduler layer is enabled.

Reported by Stephen Rothwell.

Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Mon, 21 Jul 2008 00:43:29 +0000 (17:43 -0700)]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (1232 commits)
  iucv: Fix bad merging.
  net_sched: Add size table for qdiscs
  net_sched: Add accessor function for packet length for qdiscs
  net_sched: Add qdisc_enqueue wrapper
  highmem: Export totalhigh_pages.
  ipv6 mcast: Omit redundant address family checks in ip6_mc_source().
  net: Use standard structures for generic socket address structures.
  ipv6 netns: Make several "global" sysctl variables namespace aware.
  netns: Use net_eq() to compare net-namespaces for optimization.
  ipv6: remove unused macros from net/ipv6.h
  ipv6: remove unused parameter from ip6_ra_control
  tcp: fix kernel panic with listening_get_next
  tcp: Remove redundant checks when setting eff_sacks
  tcp: options clean up
  tcp: Fix MD5 signatures for non-linear skbs
  sctp: Update sctp global memory limit allocations.
  sctp: remove unnecessary byteshifting, calculate directly in big-endian
  sctp: Allow only 1 listening socket with SO_REUSEADDR
  sctp: Do not leak memory on multiple listen() calls
  sctp: Support ipv6only AF_INET6 sockets.
  ...

12 years agoMerge branch 'for-linus' of git://www.jni.nu/cris
Linus Torvalds [Mon, 21 Jul 2008 00:37:46 +0000 (17:37 -0700)]
Merge branch 'for-linus' of git://www.jni.nu/cris

* 'for-linus' of git://www.jni.nu/cris:
  [CRISv10] Clean up compressed/misc.c
  [CRISv10] Correct whitespace damage.
  [CRIS] Correct definition of subdirs for install_headers.
  [CRIS] Correct image makefiles to allow using a separate OBJ-directory.
  [CRIS] Build fixes for compressed and rescue images for v10 and v32:
  It looks at least odd to apply spin_unlock to a mutex.
  cris: compile fixes for 2.6.26-rc5

12 years agoinitrd: Fix virtual/physical mix-up in overwrite test
Geert Uytterhoeven [Thu, 17 Jul 2008 19:16:36 +0000 (21:16 +0200)]
initrd: Fix virtual/physical mix-up in overwrite test

On recent kernels, I get the following error when using an initrd:

| initrd overwritten (0x00b78000 < 0x07668000) - disabling it.

My Amiga 4000 has 12 MiB of RAM at physical address 0x07400000 (virtual
0x00000000).
The initrd is located at the end of RAM: 0x00b78000 - 0x00c00000 (virtual).
The overwrite test compares the (virtual) initrd location to the (physical)
first available memory location, which fails.

This patch converts initrd_start to a page frame number, so it can safely be
compared with min_low_pfn.

Before the introduction of discontiguous memory support on m68k
(12d810c1b8c2b913d48e629e2b5c01d105029839), min_low_pfn was just left
untouched by the m68k-specific code (zero, I guess), and everything worked
fine.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agodio: use dio_match_device() in dio_bus_match()
Akinobu Mita [Thu, 17 Jul 2008 19:16:35 +0000 (21:16 +0200)]
dio: use dio_match_device() in dio_bus_match()

dio_bus_match() can use dio_match_device().

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoarch/m68k/mm/sun3mmu.c: Eliminate NULL test and memset after alloc_bootmem
Julia Lawall [Thu, 17 Jul 2008 19:16:34 +0000 (21:16 +0200)]
arch/m68k/mm/sun3mmu.c: Eliminate NULL test and memset after alloc_bootmem

As noted by Akinobu Mita in patch b1fceac2b9e04d278316b2faddf276015fc06e3b,
alloc_bootmem and related functions never return NULL and always return a
zeroed region of memory.  Thus a NULL test or memset after calls to these
functions is unnecessary.

This was fixed using the following semantic patch.
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@
expression E;
statement S;
@@

E = \(alloc_bootmem\|alloc_bootmem_low\|alloc_bootmem_pages\|alloc_bootmem_low_pages\)(...)
.. when != E
(
- BUG_ON (E == NULL);
|
- if (E == NULL) S
)

@@
expression E,E1;
@@

E = \(alloc_bootmem\|alloc_bootmem_low\|alloc_bootmem_pages\|alloc_bootmem_low_pages\)(...)
.. when != E
- memset(E,0,E1);
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoarch/m68k/mm/motorola.c: Eliminate NULL test and memset after alloc_bootmem
Julia Lawall [Thu, 17 Jul 2008 19:16:33 +0000 (21:16 +0200)]
arch/m68k/mm/motorola.c: Eliminate NULL test and memset after alloc_bootmem

As noted by Akinobu Mita in patch b1fceac2b9e04d278316b2faddf276015fc06e3b,
alloc_bootmem and related functions never return NULL and always return a
zeroed region of memory.  Thus a NULL test or memset after calls to these
functions is unnecessary.

This was fixed using the following semantic patch.
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@
expression E;
statement S;
@@

E = \(alloc_bootmem\|alloc_bootmem_low\|alloc_bootmem_pages\|alloc_bootmem_low_pages\)(...)
.. when != E
(
- BUG_ON (E == NULL);
|
- if (E == NULL) S
)

@@
expression E,E1;
@@

E = \(alloc_bootmem\|alloc_bootmem_low\|alloc_bootmem_pages\|alloc_bootmem_low_pages\)(...)
.. when != E
- memset(E,0,E1);
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agom68k/Apollo: remove the unused APOLLO_ELPLUS option
Geert Uytterhoeven [Thu, 17 Jul 2008 19:16:32 +0000 (21:16 +0200)]
m68k/Apollo: remove the unused APOLLO_ELPLUS option

Looking at older kernel sources the APOLLO_ELPLUS option was added
somewhere during kernel 2.1, but even kernel 2.2.0 does not contain
any driver that would be enabled through it...

Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agom68k/Atari: remove the dead ATARI_SCC{,_DMA} options
Adrian Bunk [Thu, 17 Jul 2008 19:16:31 +0000 (21:16 +0200)]
m68k/Atari: remove the dead ATARI_SCC{,_DMA} options

It seems the driver was removed back in kernel 2.3 but the options were
forgotten.

Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agom68k/Mac: remove the unused ADB_KEYBOARD option
Adrian Bunk [Thu, 17 Jul 2008 19:16:30 +0000 (21:16 +0200)]
m68k/Mac: remove the unused ADB_KEYBOARD option

When the driver was removed back in 2002 the option was forgotten.

Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agom68k/apollo: Add missing call to apollo_parse_bootinfo()
Geert Uytterhoeven [Thu, 17 Jul 2008 19:16:29 +0000 (21:16 +0200)]
m68k/apollo: Add missing call to apollo_parse_bootinfo()

Add the missing call to apollo_parse_bootinfo(), which had been lost from a
big Apollo support patch by Peter De Schrijver in 1999.

Thanks to Adrian Bunk for noticing!

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agom68k: remove stale ARCH_SUN4 #define
Adrian Bunk [Thu, 17 Jul 2008 19:16:28 +0000 (21:16 +0200)]
m68k: remove stale ARCH_SUN4 #define

m68k: remove stale ARCH_SUN4 #define

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agom68k/sun3/: possible cleanups
Adrian Bunk [Thu, 17 Jul 2008 19:16:27 +0000 (21:16 +0200)]
m68k/sun3/: possible cleanups

This patch contains the following possible cleanups:
- make the following needlessly global code static:
  - config.c: sun3_bootmem_alloc()
  - config.c: sun3_sched_init()
  - dvma.c: dvma_page()
  - idprom.c: struct Sun_Machines[]
  - mmu_emu.c: struct ctx_alloc[]
  - sun3dvma.c: iommu_use[]
  - sun3ints.c: led_pattern[]
- remove the unused sbus.c

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agom68k/q40/config.c: make functions static
Adrian Bunk [Thu, 17 Jul 2008 19:16:26 +0000 (21:16 +0200)]
m68k/q40/config.c: make functions static

This patch makes the following needlessly global functions static:
- q40_reset()
- q40_halt()
- q40_disable_irqs()
- q40_gettimeoffset()
- q40_hwclk()
- q40_get_ss()
- q40_set_clock_mmss()

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agom68k/mac/: possible cleanups
Adrian Bunk [Thu, 17 Jul 2008 19:16:25 +0000 (21:16 +0200)]
m68k/mac/: possible cleanups

This patch contains the following possible cleanups:
- make the following needlessly global code (always) static:
  - baboon.c: struct baboon
  - baboon.c: baboon_irq()
  - config.c: mac_orig_videoaddr
  - config.c: mac_identify()
  - config.c: mac_report_hardware()
  - config.c: mac_debug_console_write()
  - config.c: mac_sccb_console_write()
  - config.c: mac_scca_console_write()
  - config.c: mac_init_scc_port()
  - oss.c: oss_irq()
  - oss.c: oss_nubus_irq()
  - psc.c: psc_debug_dump()
  - psc.c: psc_dma_die_die_die()
  - via.c: rbv_clear
- remove the unused bootparse.c
- #if 0 the following unused functions:
  - config.c: mac_debugging_short()
  - config.c: mac_debugging_long()
- remove the following unused code:
  - config.c: mac_bisize
  - config.c: mac_env
  - config.c: mac_SCC_init_done
  - config.c: mac_SCC_reset_done
  - config.c: mac_init_scca_port()
  - config.c: mac_init_sccb_port()

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agom68k/atari/debug.c: possible cleanups
Adrian Bunk [Thu, 17 Jul 2008 19:16:24 +0000 (21:16 +0200)]
m68k/atari/debug.c: possible cleanups

This patch contains the following possible cleanups:
- make the following needlessly global functions (always) static:
  - atari_mfp_console_write()
  - atari_scc_console_write()
  - atari_midi_console_write()
  - atari_init_mfp_port()
  - atari_init_scc_port()
  - atari_init_midi_port()
- #if 0 the following unused functions:
  - atari_mfp_console_wait_key()
  - atari_scc_console_wait_key()
  - atari_midi_console_wait_key()
- remove the following unused variables:
  - atari_MFP_init_done
  - atari_SCC_init_done

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agom68k/amiga/: possible cleanups
Adrian Bunk [Thu, 17 Jul 2008 19:16:23 +0000 (21:16 +0200)]
m68k/amiga/: possible cleanups

This patch contains the following possible cleanups:
- amiints.c: add a proper prototype for amiga_init_IRQ() in
             include/asm-m68k/amigaints.h
- make the following needlessly global code static:
  - config.c: amiga_model
  - config.c: amiga_psfreq
  - config.c: amiga_serial_console_write()
- #if 0 the following unused functions:
  - config.c: amiga_serial_puts()
  - config.c: amiga_serial_console_wait_key()
  - config.c: amiga_serial_gets()
- remove the following unused variable:
  - config.c: amiga_masterclock

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoexport c2p
Adrian Bunk [Thu, 17 Jul 2008 19:16:22 +0000 (21:16 +0200)]
export c2p

This patch fixes the following build error:

<--  snip  -->

..
  Building modules, stage 2.
  MODPOST 1203 modules
ERROR: "c2p" [drivers/video/amifb.ko] undefined!
..
make[2]: *** [__modpost] Error 1

<--  snip  -->

Reported-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoexport amiga_vblank
Adrian Bunk [Thu, 17 Jul 2008 19:16:21 +0000 (21:16 +0200)]
export amiga_vblank

This patch fixes the following build error:

<--  snip  -->

..
  Building modules, stage 2.
  MODPOST 1203 modules
ERROR: "amiga_vblank" [drivers/video/amifb.ko] undefined!
..
make[2]: *** [__modpost] Error 1

<--  snip  -->

Reported-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agodrivers/video/c2p.c: add MODULE_LICENSE
Adrian Bunk [Thu, 17 Jul 2008 19:16:20 +0000 (21:16 +0200)]
drivers/video/c2p.c: add MODULE_LICENSE

This patch adds the missing MODULE_LICENSE("GPL").

Reported-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoatafb: Register Atari-specific video modes with sysfs
Geert Uytterhoeven [Thu, 17 Jul 2008 19:16:19 +0000 (21:16 +0200)]
atafb: Register Atari-specific video modes with sysfs

Register the Atari-specific video modes with sysfs, so you can see them in
/sys/class/graphics/fb0/modes and change the video mode by writing to
/sys/class/graphics/fb0/mode.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoamifb: Register Amiga-specific video modes with sysfs
Geert Uytterhoeven [Thu, 17 Jul 2008 19:16:18 +0000 (21:16 +0200)]
amifb: Register Amiga-specific video modes with sysfs

Register the Amiga-specific video modes with sysfs, so you can see them in
/sys/class/graphics/fb0/modes and change the video mode by writing to
/sys/class/graphics/fb0/mode.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agozorro: use memory_read_from_buffer
akinobu.mita@gmail.com [Thu, 17 Jul 2008 19:16:17 +0000 (21:16 +0200)]
zorro: use memory_read_from_buffer

zorro: use memory_read_from_buffer

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoZORRO: Replace deprecated __initcall with equivalent device_initcall.
Robert P. J. Day [Thu, 17 Jul 2008 19:16:16 +0000 (21:16 +0200)]
ZORRO: Replace deprecated __initcall with equivalent device_initcall.

ZORRO: Replace deprecated __initcall with equivalent device_initcall.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agom68k: remove AP1000 code
Adrian Bunk [Thu, 17 Jul 2008 19:16:15 +0000 (21:16 +0200)]
m68k: remove AP1000 code

Unless I miss something that's code for a sparc machine even the sparc
code no longer supports that got copied to m68k when these files were
copied.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agom68k: make multi_defconfig the default defconfig
Adrian Bunk [Thu, 17 Jul 2008 19:16:14 +0000 (21:16 +0200)]
m68k: make multi_defconfig the default defconfig

It seems to match the intention behind multi_defconfig to make it the
default defconfig.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoStringify support commas
Mathieu Desnoyers [Thu, 17 Jul 2008 19:16:13 +0000 (21:16 +0200)]
Stringify support commas

> This is a no-no for those archs that still use -traditional.
 > > I dunno if this is a problem for you at the moment and the
 > > right fix is anyway to nuke -traditional.
 > >
 > >     Sam

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agom68k: Allow no CPU/platform type for allnoconfig
Geert Uytterhoeven [Thu, 17 Jul 2008 19:16:12 +0000 (21:16 +0200)]
m68k: Allow no CPU/platform type for allnoconfig

Allow no CPU/platform type for allnoconfig
  - Provide a dummy value for FPSTATESIZE if no CPU type was selected
  - Provide a dummy value for NR_IRQS if no platform type was selected
  - Warn the user if no CPU or platform type was selected

Note: you still cannot build an allnoconfig kernel, as CONFIG_SWAP=n doesn't
build and we cannot easily fix that
(http://groups.google.com/group/linux.kernel/browse_thread/thread/d430c78b07e1827b)

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agom68k: vmlinux-std/sun3.lds.S cleanup - use PAGE_SIZE macro
Cyrill Gorcunov [Thu, 17 Jul 2008 19:16:11 +0000 (21:16 +0200)]
m68k: vmlinux-std/sun3.lds.S cleanup - use PAGE_SIZE macro

This patch includes page.h header into linker script that
allow us to use PAGE_SIZE macro instead of numeric constant

Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agom68k: Return -ENODEV if no device is found
Geert Uytterhoeven [Thu, 17 Jul 2008 19:16:10 +0000 (21:16 +0200)]
m68k: Return -ENODEV if no device is found

According to the tests in do_initcalls(), the proper error code in case no
device is found is -ENODEV, not -ENXIO or -EIO.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoariadne: use netstats in net_device structure
Paulius Zaleckas [Thu, 17 Jul 2008 19:16:09 +0000 (21:16 +0200)]
ariadne: use netstats in net_device structure

Use net_device_stats from net_device structure instead of local.

Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agom68k: remove CVS keywords
Adrian Bunk [Thu, 17 Jul 2008 19:16:08 +0000 (21:16 +0200)]
m68k: remove CVS keywords

This patch removes CVS keywords that weren't updated for a long time
from comments.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoMerge branch 'configfs-fixup-ptr-error' of git://oss.oracle.com/git/jlbec/linux-2.6
Linus Torvalds [Mon, 21 Jul 2008 00:17:52 +0000 (17:17 -0700)]
Merge branch 'configfs-fixup-ptr-error' of git://oss.oracle.com/git/jlbec/linux-2.6

* 'configfs-fixup-ptr-error' of git://oss.oracle.com/git/jlbec/linux-2.6:
  configfs: Allow ->make_item() and ->make_group() to return detailed errors.
  Revert "configfs: Allow ->make_item() and ->make_group() to return detailed errors."

12 years agoAPCI: revert another duplicated patch
Thomas Gleixner [Fri, 18 Jul 2008 00:07:02 +0000 (02:07 +0200)]
APCI: revert another duplicated patch

commit d1857056904d5f313f11184fcfa624652ff9620a ("ACPI: don't walk
tables if ACPI was disabled") is another superfluous duplicate commit
caused by git -> quilt -> git conversion.

Revert it.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoAPCI: revert duplicated patch
Thomas Gleixner [Thu, 17 Jul 2008 23:11:38 +0000 (01:11 +0200)]
APCI: revert duplicated patch

commit 816c2eda3ce8fa7eb62f22e01e2ec7a3f7d677c0 ("dock: bay: Don't call
acpi_walk_namespace() when ACPI is disabled.") was merged between
2.6.26-rc8 and -rc9)

Due to rebasing the ACPI tree via quilt the same patch got applied again
via commit cc7e51666d82aedfd6b9a033ca1a10d71c21f1ca ("dock: bay: Don't
call acpi_walk_namespace() when ACPI is disabled.")

Revert it, as it is obviously bogus.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoFix strip driver back up for ldisc/tty changes
Alan Cox [Wed, 16 Jul 2008 20:57:28 +0000 (21:57 +0100)]
Fix strip driver back up for ldisc/tty changes

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agotty: add more tty_port fields
Alan Cox [Wed, 16 Jul 2008 20:57:18 +0000 (21:57 +0100)]
tty: add more tty_port fields

Move more bits into the tty_port structure

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agotermios: Termios defines for other platforms
Alan Cox [Wed, 16 Jul 2008 20:57:10 +0000 (21:57 +0100)]
termios: Termios defines for other platforms

Fix up the termios of the people who have not yet got with the program

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agocyclades: use tty_port
Alan Cox [Wed, 16 Jul 2008 20:57:02 +0000 (21:57 +0100)]
cyclades: use tty_port

Switch cyclades to use the new tty_port structure

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agotty: Clean up tiocmset
Alan Cox [Wed, 16 Jul 2008 20:56:54 +0000 (21:56 +0100)]
tty: Clean up tiocmset

Reverse the order of one test and it gets much more readable

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agosynclink: use tty_port
Alan Cox [Wed, 16 Jul 2008 20:56:46 +0000 (21:56 +0100)]
synclink: use tty_port

Switch the synclink ports to use the new tty_port structure

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agostallion: use tty_port
Alan Cox [Wed, 16 Jul 2008 20:56:37 +0000 (21:56 +0100)]
stallion: use tty_port

Switch the stallion driver to use the tty_port structure

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoatmel_serial: Fix tty_port breakage
Haavard Skinnemoen [Wed, 16 Jul 2008 20:56:29 +0000 (21:56 +0100)]
atmel_serial: Fix tty_port breakage

The tty pointer has been moved into a tty_port field, so we need to use
->info->port.tty instead of just ->info->tty. Fixes these build errors:

David Brownell <david-b@pacbell.net> wrote:
> drivers/serial/atmel_serial.c: In function 'atmel_rx_from_ring':
> drivers/serial/atmel_serial.c:665: error: 'struct uart_info' has no member named 'tty'
> drivers/serial/atmel_serial.c: In function 'atmel_rx_from_dma':
> drivers/serial/atmel_serial.c:672: error: 'struct uart_info' has no member named 'tty'
> drivers/serial/atmel_serial.c: In function 'atmel_startup':
> drivers/serial/atmel_serial.c:797: error: 'struct uart_info' has no member named 'tty'
> make[2]: *** [drivers/serial/atmel_serial.o] Error 1

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agorocket: use tty_port
Alan Cox [Wed, 16 Jul 2008 20:56:18 +0000 (21:56 +0100)]
rocket: use tty_port

Switch the rocketport to use the new tty_port structure

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agomxser: use tty_port
Alan Cox [Wed, 16 Jul 2008 20:56:10 +0000 (21:56 +0100)]
mxser: use tty_port

Switch mxser to use the new tty_port structure

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agomoxa: use tty_port
Alan Cox [Wed, 16 Jul 2008 20:56:02 +0000 (21:56 +0100)]
moxa: use tty_port

Switch MOXA to use the new tty_port structure

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoistallion: use tty_port
Alan Cox [Wed, 16 Jul 2008 20:55:53 +0000 (21:55 +0100)]
istallion: use tty_port

Switch istallion to use the new tty_port structure

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoisicom: use tty_port
Alan Cox [Wed, 16 Jul 2008 20:55:45 +0000 (21:55 +0100)]
isicom: use tty_port

Switch isicom to use a tty_port structure for some fields

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoriscom8: remove bogus checks
Alan Cox [Wed, 16 Jul 2008 20:55:37 +0000 (21:55 +0100)]
riscom8: remove bogus checks

Chris Malley posted a patch removing a NULL check in the riscom8 driver.
Further analysis shows that even more of the tests are irrelevant so we
can delete lots of stuff

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoriscom8: use tty_port
Alan Cox [Wed, 16 Jul 2008 20:55:29 +0000 (21:55 +0100)]
riscom8: use tty_port

Switch riscom8 to use the new tty_port structure

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agogs: use tty_port
Alan Cox [Wed, 16 Jul 2008 20:55:20 +0000 (21:55 +0100)]
gs: use tty_port

Switch drivers using the old "generic serial" driver to use the tty_port
structures

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoesp: use tty_port
Alan Cox [Wed, 16 Jul 2008 20:55:11 +0000 (21:55 +0100)]
esp: use tty_port

Switch esp to use the new tty_port structures

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoepca: use tty_port
Alan Cox [Wed, 16 Jul 2008 20:55:02 +0000 (21:55 +0100)]
epca: use tty_port

Switch the EPCA driver to include and begin using a tty_port structure

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agotty.h: clean up
Alan Cox [Wed, 16 Jul 2008 20:54:54 +0000 (21:54 +0100)]
tty.h: clean up

Coding style clean up and white space tidy

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoFix compile errors in SGI console drivers (linux-next tree)
Takashi Iwai [Wed, 16 Jul 2008 20:54:42 +0000 (21:54 +0100)]
Fix compile errors in SGI console drivers (linux-next tree)

The below is the patch to replace blindly all possible places,
including Jack's fixes.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
(Reviewed and checked rather than blindly added)
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years ago- Fix compile errors in SGI console drivers (linux-next tree)
Jack Steiner [Wed, 16 Jul 2008 20:54:31 +0000 (21:54 +0100)]
- Fix compile errors in SGI console drivers (linux-next tree)

Fix compile errors in SGI console drivers caused by changes to the
tty_port structures in the linux-next tree.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agottydev: fix pamc_zilog for tty pointer move
Stephen Rothwell [Wed, 16 Jul 2008 20:54:22 +0000 (21:54 +0100)]
ttydev: fix pamc_zilog for tty pointer move

Today's linux-next build (powerpc allyesconfig) failed like this:

drivers/serial/pmac_zilog.c: In function 'pmz_receive_chars':
drivers/serial/pmac_zilog.c:245: error: 'struct uart_info' has no member named 'tty'
drivers/serial/pmac_zilog.c:250: error: 'struct uart_info' has no member named 'tty'

I applied the patch below (which builds but may, or may not, be correct).
--
Cheers,
Stephen Rothwell                    sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agottydev: fix pamc_zilog for tty pointer move
Stephen Rothwell [Wed, 16 Jul 2008 20:54:11 +0000 (21:54 +0100)]
ttydev: fix pamc_zilog for tty pointer move

Today's linux-next build (sparc64 defconfig) failed like this:

drivers/serial/sunhv.c: In function `receive_chars':
drivers/serial/sunhv.c:188: error: structure has no member named `tty'
drivers/serial/sunsu.c: In function `receive_chars':
drivers/serial/sunsu.c:314: error: structure has no member named `tty'
drivers/serial/sunsab.c: In function `receive_chars':
drivers/serial/sunsab.c:121: error: structure has no member named `tty'

I applied the following patch (which, again, may not be correct).

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoMN10300: Fix MN10300's serial port driver to get at its tty_struct
David Howells [Wed, 16 Jul 2008 20:54:01 +0000 (21:54 +0100)]
MN10300: Fix MN10300's serial port driver to get at its tty_struct

Fix MN10300's serial port driver to get at its tty_struct as this moved
from struct uart_info into struct tty_port in patch:

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoserial: use tty_port
Alan Cox [Wed, 16 Jul 2008 20:53:50 +0000 (21:53 +0100)]
serial: use tty_port

Switch the serial_core based drivers to use the new tty_port structure.
We can't quite use all of it yet because of the dynamically allocated
extras in the serial_core layer.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agotty: Introduce a tty_port common structure
Alan Cox [Wed, 16 Jul 2008 20:53:41 +0000 (21:53 +0100)]
tty: Introduce a tty_port common structure

Every tty driver has its own concept of a port structure and because
they all differ we cannot extract commonality.  Begin fixing this by
creating a structure drivers can elect to use so that over time we can
push fields into this and create commonality and then introduce common
methods.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agodrivers/serial/: remove CVS keywords
Adrian Bunk [Wed, 16 Jul 2008 20:53:31 +0000 (21:53 +0100)]
drivers/serial/: remove CVS keywords

This patch removes CVS keywords that weren't updated for a long time in
comments, printk's and MODULE_DESCRIPTION's (no printk's or
MODULE_DESCRIPTION's are completely removed).

While doing this I also found and fixed a missing \n in a printk
in m32r_sio.c

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agodrivers/char/rio/: remove VCS tags
Adrian Bunk [Wed, 16 Jul 2008 20:53:22 +0000 (21:53 +0100)]
drivers/char/rio/: remove VCS tags

This patch removes ancient VCS tags (either protected
by #ifdef SCCS_LABELS or commented out).

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agotty: Ldisc revamp
Alan Cox [Wed, 16 Jul 2008 20:53:12 +0000 (21:53 +0100)]
tty: Ldisc revamp

Move the line disciplines towards a conventional ->ops arrangement.  For
the moment the actual 'tty_ldisc' struct in the tty is kept as part of
the tty struct but this can then be changed if it turns out that when it
all settles down we want to refcount ldiscs separately to the tty.

Pull the ldisc code out of /proc and put it with our ldisc code.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agotty: isicom, enable/disable pci device
Jiri Slaby [Wed, 16 Jul 2008 20:52:56 +0000 (21:52 +0100)]
tty: isicom, enable/disable pci device

Don't forget to enable and disable PCI devices.  The device might be
unusable without that.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoSubject: [PATCH 2/2] atmel_serial: Implement flush_buffer() hook
Haavard Skinnemoen [Wed, 16 Jul 2008 20:52:46 +0000 (21:52 +0100)]
Subject: [PATCH 2/2] atmel_serial: Implement flush_buffer() hook

Avoid dumping garbage to the serial port when the tty is flushed. This
tends to happen when rebooting from a serial console.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoSubject: [PATCH 1/2] serial: Add flush_buffer() operation to uart_ops
Haavard Skinnemoen [Wed, 16 Jul 2008 20:52:36 +0000 (21:52 +0100)]
Subject: [PATCH 1/2] serial: Add flush_buffer() operation to uart_ops

Serial drivers using DMA (like the atmel_serial driver) tend to get very
confused when the xmit buffer is flushed and nobody told them.  They
also tend to spew a lot of garbage since the DMA engine keeps running
after the buffer is flushed and possibly refilled with unrelated data.

This patch adds a new flush_buffer operation to the uart_ops struct,
along with a call to it from uart_flush_buffer() right after the xmit
buffer has been cleared. The driver can implement this in order to
syncronize its internal DMA state with the xmit buffer when the buffer
is flushed.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agosimserial: Fix up for ldisc changes
Alan Cox [Wed, 16 Jul 2008 20:52:25 +0000 (21:52 +0100)]
simserial: Fix up for ldisc changes

Noted by Tony Luck although I've done the patches differently and also
removed some other bogus oddments.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agomfd: let asic3 use mem resource instead of bus_shift
Philipp Zabel [Thu, 10 Jul 2008 00:17:02 +0000 (02:17 +0200)]
mfd: let asic3 use mem resource instead of bus_shift

The bus_shift parameter in platform_data is not needed
as we can tell the driver with the IOMEM_RESOURCE whether
the ASIC is located on a 16bit or 32bit memory bus.

The htc-egpio driver uses a more descriptive bus_width parameter,
but for drivers where the register map size fixed, we don't even
need this.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
12 years agomfd: remove DS1WM register definitions from asic3.h
Philipp Zabel [Thu, 10 Jul 2008 00:16:27 +0000 (02:16 +0200)]
mfd: remove DS1WM register definitions from asic3.h

There is a dedicated ds1wm driver, no need to duplicate this
information here.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
12 years agomfd: add ASIC3_CONFIG_GPIO templates
Philipp Zabel [Thu, 3 Jul 2008 10:27:32 +0000 (12:27 +0200)]
mfd: add ASIC3_CONFIG_GPIO templates

As ASIC3 GPIO alternate function configuration is expected to be similar
for several devices, it is convenient to define descriptive macros. This
patch is inspired by the PXA MFP configuration, the alternate functions
were observed on hx4700 and blueangel.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
12 years agomfd: fix the asic3 irq demux code
Philipp Zabel [Thu, 3 Jul 2008 09:08:27 +0000 (11:08 +0200)]
mfd: fix the asic3 irq demux code

Wrong irq numbers were given to desc->handle_irq, which on some devices
caused endless loops (asic3_irq_demux calling itself, basically).

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
12 years agomfd: asic3 should depend on gpiolib
Samuel Ortiz [Tue, 24 Jun 2008 21:37:09 +0000 (23:37 +0200)]
mfd: asic3 should depend on gpiolib

Now that asic3 implements the gpiolib API, it should depend on it at
build time.

Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
12 years agomfd: fix asic3 config array initialisation
Philipp Zabel [Mon, 23 Jun 2008 23:31:24 +0000 (01:31 +0200)]
mfd: fix asic3 config array initialisation

Our memset length was incorrect.

Tested-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
12 years agomfd: move asic3 probe functions into __init section
Philipp Zabel [Fri, 20 Jun 2008 22:51:38 +0000 (00:51 +0200)]
mfd: move asic3 probe functions into __init section

Potentially free some memory by moving the _probe functions into __init.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
12 years agomfd: Use uppercase only for asic3 macros and defines
Samuel Ortiz [Fri, 20 Jun 2008 09:12:21 +0000 (11:12 +0200)]
mfd: Use uppercase only for asic3 macros and defines

Let's be consistent and use uppercase only, for both macro and defines.

Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
12 years agomfd: use dev_* macros for asic3 debugging
Samuel Ortiz [Fri, 20 Jun 2008 09:11:19 +0000 (11:11 +0200)]
mfd: use dev_* macros for asic3 debugging

We replace the various printks, and use the dev_* macros instead.

Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
12 years agomfd: New asic3 gpio configuration code
Samuel Ortiz [Fri, 20 Jun 2008 09:09:51 +0000 (11:09 +0200)]
mfd: New asic3 gpio configuration code

The ASIC3 GPIO configuration code is a bit obscure and hardly readable.
This patch changes it so that it is now more readable and understandable,
by being more explicit.

Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
12 years agomfd: asic3 children platform data removal
Samuel Ortiz [Fri, 20 Jun 2008 09:07:39 +0000 (11:07 +0200)]
mfd: asic3 children platform data removal

Platform devices should be dynamically allocated, and each supported
device should have its own platform data.
For now we just remove this buggy code.

Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
12 years agomfd: asic3 gpiolib support
Samuel Ortiz [Fri, 20 Jun 2008 09:02:19 +0000 (11:02 +0200)]
mfd: asic3 gpiolib support

ASIC3 is, among other things, a GPIO extender. We should thus have it
supporting the current gpiolib API.

Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
12 years agoiucv: Fix bad merging.
David S. Miller [Sun, 20 Jul 2008 17:18:44 +0000 (10:18 -0700)]
iucv: Fix bad merging.

Noticed by Stephen Rothwell.

Signed-off-by: David S. Miller <davem@davemloft.net>
12 years ago[MIPS] Remove unused maltasmp.h.
Yoichi Yuasa [Sun, 20 Jul 2008 13:03:32 +0000 (22:03 +0900)]
[MIPS] Remove unused maltasmp.h.

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
12 years ago[MIPS] Remove unused saa9730_uart.h.
Yoichi Yuasa [Sun, 20 Jul 2008 13:01:06 +0000 (22:01 +0900)]
[MIPS] Remove unused saa9730_uart.h.

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
12 years ago[MIPS] Rename MIPS sys_pipe syscall entry point to something MIPS-specific.
Ralf Baechle [Sun, 20 Jul 2008 12:16:46 +0000 (13:16 +0100)]
[MIPS] Rename MIPS sys_pipe syscall entry point to something MIPS-specific.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
12 years ago[MIPS] 32-bit compat: Delete unused sys_truncate64 and sys_ftruncate64.
Ralf Baechle [Sun, 20 Jul 2008 10:34:39 +0000 (11:34 +0100)]
[MIPS] 32-bit compat: Delete unused sys_truncate64 and sys_ftruncate64.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
12 years ago[MIPS] TXx9: Fix some sparse warnings
Atsushi Nemoto [Fri, 18 Jul 2008 16:51:52 +0000 (01:51 +0900)]
[MIPS] TXx9: Fix some sparse warnings

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
12 years ago[MIPS] TXx9: Add 64-bit support
Atsushi Nemoto [Fri, 18 Jul 2008 16:51:47 +0000 (01:51 +0900)]
[MIPS] TXx9: Add 64-bit support

SYS_SUPPORTS_64BIT_KERNEL is enabled for RBTX4927/RBTX4938, but
actually it was broken for long time (or from the beginning).  Now it
should work.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
12 years ago[MIPS] TXx9: Cleanups for 64-bit support
Atsushi Nemoto [Fri, 18 Jul 2008 16:51:41 +0000 (01:51 +0900)]
[MIPS] TXx9: Cleanups for 64-bit support

* Unify (and fix) mem_tx4938.c and mem_tx4927.c
* Simplify prom_init
* Kill volatiles and unused definitions for tx4927.h and tx4938.h

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
12 years ago[MIPS] Cobalt: Fix I/O port resource range
Yoichi Yuasa [Fri, 18 Jul 2008 14:03:15 +0000 (23:03 +0900)]
[MIPS] Cobalt: Fix I/O port resource range

LCD and buttons don't use I/O port space.

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
12 years ago[MIPS] don't leak setup_early_printk() in userspace header
Adrian Bunk [Wed, 16 Jul 2008 16:26:15 +0000 (19:26 +0300)]
[MIPS] don't leak setup_early_printk() in userspace header

Our userspace headers shouldn't contain prototypes of in-kernel
functions.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
12 years ago[MIPS] Remove include/asm-mips/mips-boards/sead{,int}.h
Adrian Bunk [Wed, 16 Jul 2008 16:25:50 +0000 (19:25 +0300)]
[MIPS] Remove include/asm-mips/mips-boards/sead{,int}.h

include/asm-mips/mips-boards/sead{,int}.h are now obsolete.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
12 years ago[MIPS] Remove asm-mips/mips-boards/atlas{,int}.h
Adrian Bunk [Wed, 16 Jul 2008 16:25:44 +0000 (19:25 +0300)]
[MIPS] Remove asm-mips/mips-boards/atlas{,int}.h

asm-mips/mips-boards/atlas{,int}.h are now obsolete.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
12 years ago[MIPS] mips/sgi-ip22/ip28-berr.c: fix the build
Adrian Bunk [Wed, 16 Jul 2008 16:25:40 +0000 (19:25 +0300)]
[MIPS] mips/sgi-ip22/ip28-berr.c: fix the build

Commit 3e6ea3b0d7a93550a93a265e732413d3a5aaf0d2 (linux-mips.org) /
52f4f6bbcff5510f662a002ec1219660ea25af62 (kernel.org)
([MIPS] Use kernel-supplied ARRAY_SIZE() macro.)
causes the following compile error:

<--  snip  -->

...
  CC      arch/mips/sgi-ip22/ip28-berr.o
/home/bunk/linux/kernel-2.6/git/linux-2.6/arch/mips/sgi-ip22/ip28-berr.c: In function 'ip28_be_interrupt':
/home/bunk/linux/kernel-2.6/git/linux-2.6/arch/mips/sgi-ip22/ip28-berr.c:415: error: subscripted value is neither array nor pointer
/home/bunk/linux/kernel-2.6/git/linux-2.6/arch/mips/sgi-ip22/ip28-berr.c:415: error: subscripted value is neither array nor pointer
/home/bunk/linux/kernel-2.6/git/linux-2.6/arch/mips/sgi-ip22/ip28-berr.c:415: warning: type defaults to 'int' in declaration of 'type name'
/home/bunk/linux/kernel-2.6/git/linux-2.6/arch/mips/sgi-ip22/ip28-berr.c:424: error: subscripted value is neither array nor pointer
/home/bunk/linux/kernel-2.6/git/linux-2.6/arch/mips/sgi-ip22/ip28-berr.c:424: error: subscripted value is neither array nor pointer
/home/bunk/linux/kernel-2.6/git/linux-2.6/arch/mips/sgi-ip22/ip28-berr.c:424: warning: type defaults to 'int' in declaration of 'type name'
make[2]: *** [arch/mips/sgi-ip22/ip28-berr.o] Error 1

<--  snip  -->

Using ARRAY_SIZE in these places in arch/mips/sgi-ip22/ip28-berr.c was
bogus, and therefore gets reverted by this patch.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
12 years ago[MIPS] TXx9: Miscellaneous build fixes
Atsushi Nemoto [Thu, 17 Jul 2008 15:43:48 +0000 (00:43 +0900)]
[MIPS] TXx9: Miscellaneous build fixes

* Fix build if only RBTX4927 or RBTX4938 was selected.
* Move gpio helpers to generic part.
* Select SOC_TX4938 for RBTX4927/37 board.
* Fix parent of rbtx4938_fpga_resource.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>