~shefty/rdma-dev.git
8 years agoipv4: Add a socket release callback for datagram sockets
Steffen Klassert [Mon, 21 Jan 2013 02:00:03 +0000 (02:00 +0000)]
ipv4: Add a socket release callback for datagram sockets

This implements a socket release callback function to check
if the socket cached route got invalid during the time
we owned the socket. The function is used from udp, raw
and ping sockets.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agoipv4: Invalidate the socket cached route on pmtu events if possible
Steffen Klassert [Mon, 21 Jan 2013 01:59:11 +0000 (01:59 +0000)]
ipv4: Invalidate the socket cached route on pmtu events if possible

The route lookup in ipv4_sk_update_pmtu() might return a route
different from the route we cached at the socket. This is because
standart routes are per cpu, so each cpu has it's own struct rtable.
This means that we do not invalidate the socket cached route if the
NET_RX_SOFTIRQ is not served by the same cpu that the sending socket
uses. As a result, the cached route reused until we disconnect.

With this patch we invalidate the socket cached route if possible.
If the socket is owened by the user, we can't update the cached
route directly. A followup patch will implement socket release
callback functions for datagram sockets to handle this case.

Reported-by: Yurij M. Plotnikov <Yurij.Plotnikov@oktetlabs.ru>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agonet: splice: fix __splice_segment()
Eric Dumazet [Fri, 11 Jan 2013 14:46:37 +0000 (14:46 +0000)]
net: splice: fix __splice_segment()

commit 9ca1b22d6d2 (net: splice: avoid high order page splitting)
forgot that skb->head could need a copy into several page frags.

This could be the case for loopback traffic mostly.

Also remove now useless skb argument from linear_to_page()
and __splice_segment() prototypes.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agonet: splice: avoid high order page splitting
Eric Dumazet [Sat, 5 Jan 2013 21:31:18 +0000 (21:31 +0000)]
net: splice: avoid high order page splitting

splice() can handle pages of any order, but network code tries hard to
split them in PAGE_SIZE units. Not quite successfully anyway, as
__splice_segment() assumed poff < PAGE_SIZE. This is true for
the skb->data part, not necessarily for the fragments.

This patch removes this logic to give the pages as they are in the skb.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agotcp: fix incorrect LOCKDROPPEDICMPS counter
Eric Dumazet [Sat, 19 Jan 2013 16:10:37 +0000 (16:10 +0000)]
tcp: fix incorrect LOCKDROPPEDICMPS counter

commit 563d34d057 (tcp: dont drop MTU reduction indications)
added an error leading to incorrect accounting of
LINUX_MIB_LOCKDROPPEDICMPS

If socket is owned by the user, we want to increment
this SNMP counter, unless the message is a
(ICMP_DEST_UNREACH,ICMP_FRAG_NEEDED) one.

Reported-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agonet/hyperv: fix wrong length of mac address
Jianjun Kong [Fri, 18 Jan 2013 16:52:09 +0000 (16:52 +0000)]
net/hyperv: fix wrong length of mac address

This patch fixed wrong mac length, it should be ETH_ALEN,
also replaced the hardcode 6 in hyperv_net.h

Signed-off-by: Amos Kong <kongjianjun@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agonet: qmi_wwan: add ONDA MT8205 4G LTE
Bjørn Mork [Fri, 18 Jan 2013 04:26:34 +0000 (04:26 +0000)]
net: qmi_wwan: add ONDA MT8205 4G LTE

The driver description files gives these names to the vendor specific
functions on this modem:

 Diag   VID_19D2&PID_0265&MI_00
 NMEA   VID_19D2&PID_0265&MI_01
 AT cmd VID_19D2&PID_0265&MI_02
 Modem  VID_19D2&PID_0265&MI_03
 Net    VID_19D2&PID_0265&MI_04

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agonet/mlx4_core: Set number of msix vectors under SRIOV mode to firmware defaults
Or Gerlitz [Thu, 17 Jan 2013 05:30:43 +0000 (05:30 +0000)]
net/mlx4_core: Set number of msix vectors under SRIOV mode to firmware defaults

The lines

if (mlx4_is_mfunc(dev)) {
nreq = 2;
} else {

which hard code the number of requested msi-x vectors under multi-function
mode to two can be removed completely, since the firmware sets num_eqs and
reserved_eqs appropriately Thus, the code line:

nreq = min_t(int, dev->caps.num_eqs - dev->caps.reserved_eqs, nreq);

is by itself sufficient and correct for all cases. Currently, for mfunc
mode num_eqs = 32 and reserved_eqs = 28, hence four vectors will be enabled.

This triples (one vector is used for the async events and commands EQ) the
horse power provided for processing of incoming packets on netdev RSS scheme,
IO initiators/targets commands processing flows, etc.

Reviewed-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agonet/mlx4_en: Fix bridged vSwitch configuration for non SRIOV mode
Yan Burman [Thu, 17 Jan 2013 05:30:42 +0000 (05:30 +0000)]
net/mlx4_en: Fix bridged vSwitch configuration for non SRIOV mode

Commit 5b4c4d36860e "mlx4_en: Allow communication between functions on
same host" introduced a regression under which a bridge acting as vSwitch
whose uplink is an mlx4 Ethernet device become non-operative in native
(non sriov) mode. This happens since broadcast ARP requests sent by VMs
were loopback-ed by the HW and hence the bridge learned VM source MACs
on both the VM and the uplink ports.

The fix is to place the DMAC in the send WQE only under SRIOV/eSwitch
configuration or when the device is in selftest.

Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Yan Burman <yanb@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agoipv6: Add an error handler for icmp6
Steffen Klassert [Wed, 16 Jan 2013 22:09:49 +0000 (22:09 +0000)]
ipv6: Add an error handler for icmp6

pmtu and redirect events are now handled in the protocols error handler,
so add an error handler for icmp6 to do this. It is needed in the case
when we have no socket context. Based on a patch by Duan Jiong.

Reported-by: Duan Jiong <djduanjiong@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agonet: calxedaxgmac: throw away overrun frames
Rob Herring [Wed, 16 Jan 2013 13:36:37 +0000 (13:36 +0000)]
net: calxedaxgmac: throw away overrun frames

The xgmac driver assumes 1 frame per descriptor. If a frame larger than
the descriptor's buffer size is received, the frame will spill over into
the next descriptor. So check for received frames that span more than one
descriptor and discard them. This prevents a crash if we receive erroneous
large packets.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agosctp: refactor sctp_outq_teardown to insure proper re-initalization
Neil Horman [Thu, 17 Jan 2013 11:15:08 +0000 (11:15 +0000)]
sctp: refactor sctp_outq_teardown to insure proper re-initalization

Jamie Parsons reported a problem recently, in which the re-initalization of an
association (The duplicate init case), resulted in a loss of receive window
space.  He tracked down the root cause to sctp_outq_teardown, which discarded
all the data on an outq during a re-initalization of the corresponding
association, but never reset the outq->outstanding_data field to zero.  I wrote,
and he tested this fix, which does a proper full re-initalization of the outq,
fixing this problem, and hopefully future proofing us from simmilar issues down
the road.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Reported-by: Jamie Parsons <Jamie.Parsons@metaswitch.com>
Tested-by: Jamie Parsons <Jamie.Parsons@metaswitch.com>
CC: Jamie Parsons <Jamie.Parsons@metaswitch.com>
CC: Vlad Yasevich <vyasevich@gmail.com>
CC: "David S. Miller" <davem@davemloft.net>
CC: netdev@vger.kernel.org
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agomacvlan: fix macvlan_get_size()
Eric Dumazet [Thu, 17 Jan 2013 21:30:49 +0000 (13:30 -0800)]
macvlan: fix macvlan_get_size()

commit df8ef8f3aaa (macvlan: add FDB bridge ops and macvlan flags)
forgot to update macvlan_get_size() after the addition of
IFLA_MACVLAN_FLAGS

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agophy/marvell: remove fiber/copper autoselect on 88e1111
Stef van Os [Thu, 17 Jan 2013 15:36:18 +0000 (16:36 +0100)]
phy/marvell: remove fiber/copper autoselect on 88e1111

Remove the code that always enables copper/fiber autoselect,
ignoring the DIS_FC strapping pin. The default value for this
register is autoselect on anyway, and if you explicitly disable
autoselect via strapping you probably really don't want
autoselect.

Signed-off-by: Stef van Os <stef.van.os@prodrive.nl>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years ago3c574_cs: fix operator precedence between << and &
Nickolai Zeldovich [Thu, 17 Jan 2013 07:18:29 +0000 (07:18 +0000)]
3c574_cs: fix operator precedence between << and &

The code to print the FIFO size in tc574_config computes it as:

  8 << config & Ram_size

which evaluates the '<<' first, but the actual intent is to evaluate the
'&' first.  Add parentheses to enforce desired evaluation order.

Signed-off-by: Nickolai Zeldovich <nickolai@csail.mit.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agoMerge branch 'wireless'
David S. Miller [Thu, 17 Jan 2013 19:50:12 +0000 (14:50 -0500)]
Merge branch 'wireless'

John W. Linville says:

====================
This batch of fixes is intended for 3.8...

Included is a Bluetooth pull.  Gustavo says:

"A few fixes for 3.8. Five of them are just new devices ids addition.
Apart from the that there is fix to a kernel memory leak to userspace from
Anderson Lizardo, two interoperability fixes from Jaganath Kanakkassery and
Szymon Janc. And a crash fix by me."

Along with that, Amitkumar Karwar brings a pair of mwifiex fixes for
problems related to handling of band information within the driver.
These problems can lead to association failures.

Sujith Manoharan fixes a memory leak in the ath9k_htc code (originally
reported by Larry Finger).

The big hero this round is Felix Fietkau.  Felix gives us seven
ath9k fixes, including a fix for a race condition, the removal of a
double-free, and a fix for a deadlock, among others.

These have all been in linux-next for at least a couple of days,
with no complaints so far.  Please let me know if there are problems!
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...
John W. Linville [Thu, 17 Jan 2013 17:07:44 +0000 (12:07 -0500)]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless into for-davem

8 years agoipv4: Don't update the pmtu on mtu locked routes
Steffen Klassert [Wed, 16 Jan 2013 20:58:10 +0000 (20:58 +0000)]
ipv4: Don't update the pmtu on mtu locked routes

Routes with locked mtu should not use learned pmtu informations,
so do not update the pmtu on these routes.

Reported-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agoipv4: Remove output route check in ipv4_mtu
Steffen Klassert [Wed, 16 Jan 2013 20:55:01 +0000 (20:55 +0000)]
ipv4: Remove output route check in ipv4_mtu

The output route check was introduced with git commit 261663b0
(ipv4: Don't use the cached pmtu informations for input routes)
during times when we cached the pmtu informations on the
inetpeer. Now the pmtu informations are back in the routes,
so this check is obsolete. It also had some unwanted side effects,
as reported by Timo Teras and Lukas Tribus.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Acked-by: Timo Teräs <timo.teras@iki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agoipv6: fix header length calculation in ip6_append_data()
Romain KUNTZ [Wed, 16 Jan 2013 12:47:40 +0000 (12:47 +0000)]
ipv6: fix header length calculation in ip6_append_data()

Commit 299b0767 (ipv6: Fix IPsec slowpath fragmentation problem)
has introduced a error in the header length calculation that
provokes corrupted packets when non-fragmentable extensions
headers (Destination Option or Routing Header Type 2) are used.

rt->rt6i_nfheader_len is the length of the non-fragmentable
extension header, and it should be substracted to
rt->dst.header_len, and not to exthdrlen, as it was done before
commit 299b0767.

This patch reverts to the original and correct behavior. It has
been successfully tested with and without IPsec on packets
that include non-fragmentable extensions headers.

Signed-off-by: Romain Kuntz <r.kuntz@ipflavors.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agonet: qmi_wwan: add TP-LINK HSUPA Modem MA180
Bjørn Mork [Mon, 14 Jan 2013 23:19:50 +0000 (23:19 +0000)]
net: qmi_wwan: add TP-LINK HSUPA Modem MA180

The driver description files gives these names to the vendor specific
functions on this modem:

 Diagnostics VID_2357&PID_0201&MI_00
 NMEA        VID_2357&PID_0201&MI_01
 Modem       VID_2357&PID_0201&MI_03
 Networkcard VID_2357&PID_0201&MI_04

The "Networkcard" function has been verified to support these QMI
services:
    ctl (1.3)
    wds (1.3)
    dms (1.2)
    nas (1.0)

Reported-by: Thomas Schäfer <tschaefer@t-online.de>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agousbnet: dm9601: Fix incorrect command
Tushar Behera [Mon, 14 Jan 2013 19:39:01 +0000 (19:39 +0000)]
usbnet: dm9601: Fix incorrect command

commit 24b1042c4eb2 ("usbnet: dm9601: apply introduced usb command
APIs") removes the distiction between DM_WRITE_REG and DM_WRITE_REGS
command. The distiction is reintroduced to the driver so that the
functionality of the driver remains same.

CC: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agocxgb4: set coalesce parameters on all queues
Thadeu Lima de Souza Cascardo [Tue, 15 Jan 2013 05:15:10 +0000 (05:15 +0000)]
cxgb4: set coalesce parameters on all queues

The coalesce parameters was set only on the first queue, which caused
interrupt rates to be larger on all the other queues.

This patch allows interrupt rates to be reduced for certain workloads
and colaesce parameters by 41%.

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Cc: steved@us.ibm.com
Cc: toml@us.ibm.com
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agoMAINTAINERS: Stephen Hemminger email change
Stephen Hemminger [Wed, 16 Jan 2013 17:55:57 +0000 (09:55 -0800)]
MAINTAINERS: Stephen Hemminger email change

I changed my email because the vyatta.com mail server is now
redirected to brocade.com; and the Brocade mail system
is not friendly to Linux desktop users.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agoixgbe: Fix overwriting of rx_mtrl in ixgbe_ptp_hwtstamp_ioctl
Jacob Keller [Wed, 5 Dec 2012 07:53:38 +0000 (07:53 +0000)]
ixgbe: Fix overwriting of rx_mtrl in ixgbe_ptp_hwtstamp_ioctl

This patch corrects a bug introduced by commit f3444d8b. The rxmtrl value for
the UDP port to timestamp on was moved above the switch statement, but was
overwritten to 0 if the ioctl selected one of the V1 filters.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
8 years agoixgbe: only compile ixgbe_debugfs.o when enabled
Jacob Keller [Sat, 8 Dec 2012 09:04:25 +0000 (09:04 +0000)]
ixgbe: only compile ixgbe_debugfs.o when enabled

This patch modifies ixgbe_debugfs.c and the Makefile for the ixgbe
driver to only compile the file when the config is enabled. This means
we can remove the #ifdef inside the ixgbe_debugfs.c file.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
8 years agotg3: Fix crc errors on jumbo frame receive
Nithin Nayak Sujir [Mon, 14 Jan 2013 17:11:00 +0000 (17:11 +0000)]
tg3: Fix crc errors on jumbo frame receive

TG3_PHY_AUXCTL_SMDSP_ENABLE/DISABLE macros do a blind write to the phy
auxiliary control register and overwrite the EXT_PKT_LEN (bit 14) resulting
in intermittent crc errors on jumbo frames with some link partners. Change
the code to do a read/modify/write.

Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agotg3: Avoid null pointer dereference in tg3_interrupt in netconsole mode
Nithin Nayak Sujir [Mon, 14 Jan 2013 17:10:59 +0000 (17:10 +0000)]
tg3: Avoid null pointer dereference in tg3_interrupt in netconsole mode

When netconsole is enabled, logging messages generated during tg3_open
can result in a null pointer dereference for the uninitialized tg3
status block. Use the irq_sync flag to disable polling in the early
stages. irq_sync is cleared when the driver is enabling interrupts after
all initialization is completed.

Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agoMerge branch 'master' of git://1984.lsi.us.es/nf
David S. Miller [Mon, 14 Jan 2013 23:26:41 +0000 (18:26 -0500)]
Merge branch 'master' of git://1984.lsi.us.es/nf

Pablo Neira Ayuso says:

====================
The following patchset contains netfilter fixes for 3.8-rc3,
they are:

* fix possible BUG_ON if several netns are in use and the nf_conntrack
  module is removed, initial patch from Gao feng, final patch from myself.

* fix unset return value if conntrack zone are disabled at
  compile-time, reported by Borislav Petkov, fix from myself.

* fix display error message via dmesg for arp_tables, from Jan Engelhardt.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agotun: fix LSM/SELinux labeling of tun/tap devices
Paul Moore [Mon, 14 Jan 2013 07:12:19 +0000 (07:12 +0000)]
tun: fix LSM/SELinux labeling of tun/tap devices

This patch corrects some problems with LSM/SELinux that were introduced
with the multiqueue patchset.  The problem stems from the fact that the
multiqueue work changed the relationship between the tun device and its
associated socket; before the socket persisted for the life of the
device, however after the multiqueue changes the socket only persisted
for the life of the userspace connection (fd open).  For non-persistent
devices this is not an issue, but for persistent devices this can cause
the tun device to lose its SELinux label.

We correct this problem by adding an opaque LSM security blob to the
tun device struct which allows us to have the LSM security state, e.g.
SELinux labeling information, persist for the lifetime of the tun
device.  In the process we tweak the LSM hooks to work with this new
approach to TUN device/socket labeling and introduce a new LSM hook,
security_tun_dev_attach_queue(), to approve requests to attach to a
TUN queue via TUNSETQUEUE.

The SELinux code has been adjusted to match the new LSM hooks, the
other LSMs do not make use of the LSM TUN controls.  This patch makes
use of the recently added "tun_socket:attach_queue" permission to
restrict access to the TUNSETQUEUE operation.  On older SELinux
policies which do not define the "tun_socket:attach_queue" permission
the access control decision for TUNSETQUEUE will be handled according
to the SELinux policy's unknown permission setting.

Signed-off-by: Paul Moore <pmoore@redhat.com>
Acked-by: Eric Paris <eparis@parisplace.org>
Tested-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agoselinux: add the "attach_queue" permission to the "tun_socket" class
Paul Moore [Mon, 14 Jan 2013 07:12:13 +0000 (07:12 +0000)]
selinux: add the "attach_queue" permission to the "tun_socket" class

Add a new permission to align with the new TUN multiqueue support,
"tun_socket:attach_queue".

The corresponding SELinux reference policy patch is show below:

 diff --git a/policy/flask/access_vectors b/policy/flask/access_vectors
 index 28802c5..a0664a1 100644
 --- a/policy/flask/access_vectors
 +++ b/policy/flask/access_vectors
 @@ -827,6 +827,9 @@ class kernel_service

  class tun_socket
  inherits socket
 +{
 +       attach_queue
 +}

  class x_pointer
  inherits x_device

Signed-off-by: Paul Moore <pmoore@redhat.com>
Acked-by: Eric Paris <eparis@parisplace.org>
Tested-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agotcp: fix a panic on UP machines in reqsk_fastopen_remove
Eric Dumazet [Sun, 13 Jan 2013 18:21:51 +0000 (18:21 +0000)]
tcp: fix a panic on UP machines in reqsk_fastopen_remove

spin_is_locked() on a non !SMP build is kind of useless.

BUG_ON(!spin_is_locked(xx)) is guaranteed to crash.

Just remove this check in reqsk_fastopen_remove() as
the callers do hold the socket lock.

Reported-by: Ketan Kulkarni <ketkulka@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jerry Chu <hkchu@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Dave Taht <dave.taht@gmail.com>
Acked-by: H.K. Jerry Chu <hkchu@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agoMerge tag 'dt-fixes-for-3.8' of git://sources.calxeda.com/kernel/linux
Linus Torvalds [Mon, 14 Jan 2013 21:19:08 +0000 (13:19 -0800)]
Merge tag 'dt-fixes-for-3.8' of git://sources.calxeda.com/kernel/linux

Pull devicetree fixes from Rob Herring:
 "Two fixes to prevent unconditional re-compile of dts files on arm and
  arm64."

* tag 'dt-fixes-for-3.8' of git://sources.calxeda.com/kernel/linux:
  ARM: dts: prevent *.dtb from always being rebuilt
  arm64: dts: prevent *.dtb from always being rebuilt

8 years agovfs: add missing virtual cache flush after editing partial pages
Linus Torvalds [Mon, 14 Jan 2013 21:17:50 +0000 (13:17 -0800)]
vfs: add missing virtual cache flush after editing partial pages

Andrew Morton pointed this out a month ago, and then I completely forgot
about it.

If we read a partial last page of a block device, we will zero out the
end of the page, but since that page can then be mapped into user space,
we should also make sure to flush the cache on architectures that have
virtual caches.  We have the flush_dcache_page() function for this, so
use it.

Now, in practice this really never matters, because nobody sane uses
virtual caches to begin with, and they largely exist on old broken RISC
arhitectures.

And even if you did run on one of those obsolete CPU's, the whole "mmap
and access the last partial page of a block device" behavior probably
doesn't actually exist.  The normal IO functions (read/write) will never
see the zeroed-out part of the page that migth not be coherent in the
cache, because they honor the size of the device.

So I'm marking this for stable (3.7 only), but I'm not sure anybody will
ever care.

Pointed-out-by: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@vger.kernel.org # 3.7
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoath9k: disable the tasklet before taking the PCU lock
Felix Fietkau [Mon, 14 Jan 2013 15:56:46 +0000 (16:56 +0100)]
ath9k: disable the tasklet before taking the PCU lock

Fixes a reported CPU soft lockup where the tasklet tries to acquire the
lock and blocks while ath_prepare_reset (holding the lock) waits for it
to complete.

Cc: stable@vger.kernel.org
Reported-by: Robert Shade <robert.shade@gmail.com>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
8 years agoath9k: remove sc->rx.rxbuflock to fix a deadlock
Felix Fietkau [Mon, 14 Jan 2013 09:50:15 +0000 (10:50 +0100)]
ath9k: remove sc->rx.rxbuflock to fix a deadlock

The commit "ath9k: fix rx flush handling" added a deadlock that happens
because ath_rx_tasklet is called in a section that has already taken the
rx buffer lock.

It seems that the only purpose of the rxbuflock was a band-aid fix to the
reset vs rx tasklet race, which has been properly fixed in the commit
"ath9k: add a better fix for the rx tasklet vs rx flush race".

Now that the fix is in, we can safely remove the lock to avoid such issues.

Cc: stable@vger.kernel.org
Reported-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
8 years agoMerge tag 'sound-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Linus Torvalds [Mon, 14 Jan 2013 18:56:05 +0000 (10:56 -0800)]
Merge tag 'sound-3.8' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "Most of commits found here are for ASoC device specific fixes,
  arizona, cs4271, wm5102, wm2200, etc, in addition to a couple of
  memory leak fixes in ASoC core.

  Other than that, regression fixes in HD-audio and USB-audio, and a fix
  for new Realtek codecs."

* tag 'sound-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (30 commits)
  ALSA: usb-audio: Fix NULL dereference by access to non-existing substream
  ALSA: hda - Add support of new codec ALC284
  ALSA: usb-audio: Make ebox44_table static
  ALSA: hdspm - Fix wordclock status on AES32
  Revert "ALSA: hda - Shut up pins at power-saving mode with Conexnat codecs"
  ALSA: hda - Disable runtime D3 for Intel CPT & co
  ALSA: pxa27x: fix ac97 warm reset
  ALSA: pxa27x: fix ac97 cold reset
  ASoC: wm_adsp: Ensure that block writes are from DMA aligned addresses
  ASoC: wm2000: Fix sense of speech clarity enable
  ASoC: wm5100: Remove DSP B and left justified formats
  ASoC: arizona: Remove DSP B and left justified AIF modes
  ASoC: wm2200: Remove DSP B and left justified AIF modes
  ASoC: wm5102: Improve speaker enable performance
  ASoC: core: fix the memory leak in case of remove_aux_dev()
  ASoC: core: fix the memory leak in case of device_add() failure
  ASoC: cs42l52: Catch no-match case in cs42l52_get_clk
  ASoC: lm49453: Update lm49453_reg_defs values as per LM49453 HW revision-B
  ASoC: lm49453: Fix adc, mic and sidetone volume ranges
  ASoC: arizona: Correct FLL source definitions
  ...

8 years agoMerge tag 'staging-3.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh...
Linus Torvalds [Mon, 14 Jan 2013 17:08:38 +0000 (09:08 -0800)]
Merge tag 'staging-3.8-rc3' of git://git./linux/kernel/git/gregkh/staging

Pull staging fixes from Greg Kroah-Hartman:
 "Here are a number of small fixes to staging drivers for your 3.8-rc3
  tree.

  Well, the omapdrm fixes aren't really "small" but they were waiting on
  a number of other drm patches to go in through the drm tree, and got
  delayed by my vacation over the holidays.  They are totally
  self-contained, everyone involved have acked them, and they fix issues
  that people have been having with the driver.

  Other than that one, it's a bunch of tiny bugfixes for a number of
  reported issues.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
* tag 'staging-3.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (36 commits)
  staging: zram: fix invalid memory references during disk write
  staging: tidspbridge: use prepare/unprepare on dsp clocks
  staging: tidspbridge: Fix build breakage due to splitting CM functions.
  staging: comedi: comedi_test: fix race when cancelling command
  staging: comedi: Kconfig: COMEDI_NI_AT_A2150 should select COMEDI_FC
  staging: comedi: prevent auto-unconfig of manually configured devices
  staging: comedi: fix minimum AO period for NI 625x and NI 628x
  staging: vme_pio2: fix oops on module unloading
  staging: speakup: avoid out-of-range access in synth_add()
  staging: speakup: avoid out-of-range access in synth_init()
  staging: rtl8192e: Fix failure to check pci_map_single()
  staging: rtl8187se: Fix failure to check pci_map_single()
  staging: drm/imx: fix double free bug in error path
  staging: drm/imx: several bug fixes
  staging: drm/imx: check return value of ipu_reset()
  staging: drm/omap: fix flags in dma buf exporting
  staging: drm/omap: use omapdss low level API
  staging/fwserial: Update TODO file per reviewer comments
  staging/fwserial: Limit tx/rx to 1394-2008 spec maximum
  staging/fwserial: Refine Kconfig help text
  ...

8 years agoMerge tag 'usb-3.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Linus Torvalds [Mon, 14 Jan 2013 17:07:57 +0000 (09:07 -0800)]
Merge tag 'usb-3.8-rc3' of git://git./linux/kernel/git/gregkh/usb

Pull USB fixes from Greg Kroah-Hartman:
 "Here are a bunch of USB fixes for your 3.8-rc3 tree.  They all either
  fix problems that have been reported (like the xhci/hub changes) or
  add new device ids to existing drivers.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
* tag 'usb-3.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (39 commits)
  usb: ftdi_sio: Crucible Technologies COMET Caller ID - pid added
  usb: host: ohci-tmio: fix compile warning
  USB: Add device quirk for Microsoft VX700 webcam
  USB: ehci-fsl: fix regression on mpc5121e
  usb: chipidea: Allow disabling streaming not only in udc mode
  USB: fsl-mph-dr-of: fix regression on mpc5121e
  USB: select USB_ARCH_HAS_EHCI for MXS
  USB: hub: handle claim of enabled remote wakeup after reset
  USB: cdc-acm: Add support for "PSC Scanning, Magellan 800i"
  USB: option: add Nexpring NP10T terminal id
  USB: option: add Telekom Speedstick LTE II
  USB: option: blacklist network interface on ZTE MF880
  usb: imx21-hcd: Include missing linux/module.h
  USB: option: Add new MEDIATEK PID support
  USB: ehci: make debug port in-use detection functional again
  USB: usbtest: fix test number in log message
  xhci: Avoid "dead ports", add roothub port polling.
  USB: Handle warm reset failure on empty port.
  USB: Ignore port state until reset completes.
  USB: Increase reset timeout.
  ...

8 years agoMerge tag 'driver-core-3.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Mon, 14 Jan 2013 17:07:11 +0000 (09:07 -0800)]
Merge tag 'driver-core-3.8-rc3' of git://git./linux/kernel/git/gregkh/driver-core

Pull driver core fixes from Greg Kroah-Hartman:
 "Here are two patches for 3.8-rc3.

  One removes the __dev* defines from init.h now that all usages of it
  are gone from your tree.  The other fix is for debugfs's paramater
  that was using the wrong base for the option.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
* tag 'driver-core-3.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  debugfs: convert gid= argument from decimal, not octal
  Remove __dev* markings from init.h

8 years agoMerge tag 'char-misc-3.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh...
Linus Torvalds [Mon, 14 Jan 2013 17:06:24 +0000 (09:06 -0800)]
Merge tag 'char-misc-3.8-rc3' of git://git./linux/kernel/git/gregkh/char-misc

Pull char/misc fix from Greg Kroah-Hartman:
 "Here is a single fix for the mei driver that resolves a reported
  issue.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
* tag 'char-misc-3.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  mei: fix mismatch in mutex unlock-lock in mei_amthif_read()

8 years agoMerge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Linus Torvalds [Mon, 14 Jan 2013 16:56:31 +0000 (08:56 -0800)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux

Pull drm fixes from Dave Airlie:
 "Nothing too astounding

   - nouveau: bunch of regression fixes and oops fixes
   - radeon: UMS fixes, rn50 fix, dma fix
   - udl: fix EDID retrieval for large EDIDs."

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  udldrmfb: udl_get_edid: drop unneeded i--
  udldrmfb: udl_get_edid: usb_control_msg buffer must not be on the stack
  udldrmfb: Fix EDID not working with monitors with EDID extension blocks
  drm/nvc0/fb: fix crash when different mutex is used to protect same list
  drm/nouveau/clock: fix support for more than 2 monitors on nve0
  drm/nv50/disp: fix selection of bios script for analog outputs
  drm/nv17-50: restore fence buffer on resume
  drm/nouveau: fix blank LVDS screen regression on pre-nv50 cards
  drm/nouveau: fix nouveau_client allocation failure path
  drm/nouveau: don't return freed object from nouveau_handle_create
  drm/nouveau/vm: fix memory corruption when pgt allocation fails
  drm/nouveau: add locking around instobj list operations
  drm/nouveau: do not forcibly power on lvds panels
  drm/nouveau/devinit: ensure legacy vga control is enabled during post
  radeon/kms: fix dma relocation checking
  radeon/kms: force rn50 chip to always report connected on analog output
  drm/radeon: fix error path in kpage allocation
  drm/radeon: fix a bogus kfree
  drm/radeon: fix NULL pointer dereference in UMS mode

8 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Linus Torvalds [Mon, 14 Jan 2013 16:27:10 +0000 (08:27 -0800)]
Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:

 1) Fix regression allowing IP_TTL setting of zero, fix from Cong Wang.

 2) Fix leak regressions in tunap, from Jason Wang.

 3) be2net driver always returns IRQ_HANDLED in INTx handler, fix from
    Sathya Perla.

 4) qlge doesn't really support NETIF_F_TSO6, don't set that flag.  Fix
    from Amerigo Wang.

 5) Add 802.11ad Atheros wil6210 driver, from Vladimir Kondratiev.

 6) Fix MTU calculations in mac80211 layer, from T Krishna Chaitanya.

 7) Station info layer of mac80211 needs to use del_timer_sync(), from
    Johannes Berg.

 8) tcp_read_sock() can loop forever, because we don't immediately stop
    when recv_actor() returns zero.  Fix from Eric Dumazet.

 9) Fix WARN_ON() in tcp_cleanup_rbuf().  We have to use sk_eat_skb() in
    tcp_recv_skb() to handle the case where a large GRO packet is split
    up while it is use by a splice() operation.  Fix also from Eric
    Dumazet.

10) addrconf_get_prefix_route() in ipv6 tests flags incorrectly, it
    does:

        if (X && (p->flags & Y) != 0)

    when it really meant to go:

        if (X && (p->flags & X) != 0)

    fix from Romain Kuntz.

11) Fix lost Kconfig dependency for bfin_mac driver hardware
    timestamping.  From Lars-Peter Clausen.

12) Fix regression in handling of RST without ACK in TCP, from Eric
    Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (37 commits)
  be2net: fix unconditionally returning IRQ_HANDLED in INTx
  tuntap: fix leaking reference count
  tuntap: forbid calling TUNSETIFF when detached
  tuntap: switch to use rtnl_dereference()
  net, wireless: overwrite default_ethtool_ops
  qlge: remove NETIF_F_TSO6 flag
  tcp: accept RST without ACK flag
  net: ethernet: xilinx: Do not use NO_IRQ in axienet
  net: ethernet: xilinx: Do not use axienet on PPC
  bnx2x: Allow management traffic after boot from SAN
  bnx2x: Fix fastpath structures when memory allocation fails
  bfin_mac: Restore hardware time-stamping dependency on BF518
  tun: avoid owner checks on IFF_ATTACH_QUEUE
  bnx2x: move debugging code before the return
  tuntap: refuse to re-attach to different tun_struct
  ipv6: use addrconf_get_prefix_route for prefix route lookup [v2]
  ipv6: fix the noflags test in addrconf_get_prefix_route
  tcp: fix splice() and tcp collapsing interaction
  tcp: splice: fix an infinite loop in tcp_read_sock()
  net: prevent setting ttl=0 via IP_TTL
  ...

8 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc
Linus Torvalds [Mon, 14 Jan 2013 16:17:22 +0000 (08:17 -0800)]
Merge git://git./linux/kernel/git/davem/sparc

Pull sparc updates from David Miller:

 1) Add finit_module syscall entry.

 2) Remove stray __dev{init,exit} references, from Sam Ravnborg.

Fix up conflicts in the sparc PCI code due to whitespace differences in
the __dev{init,exit} removal (which also came in through Greg).

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc: remove __devinit, __devexit annotations
  sparc: Hook up finit_module syscall.

8 years agoARM: dts: prevent *.dtb from always being rebuilt
Stephen Warren [Sat, 29 Dec 2012 00:42:46 +0000 (17:42 -0700)]
ARM: dts: prevent *.dtb from always being rebuilt

if_changed (used by the *.dts->*.dtc rule) rebuilds files if they aren't
contained in $(targets). (make V=2 indicates this). Add $(dtb-y) to
$(targets) to prevent *.dtb from always being rebuilt.

This fixes a regression introduced by the .dtb rule rework in 499cd82
"ARM: dt: change .dtb build rules to build in dts directory".

Reported-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
8 years agoarm64: dts: prevent *.dtb from always being rebuilt
Stephen Warren [Sat, 29 Dec 2012 00:42:47 +0000 (17:42 -0700)]
arm64: dts: prevent *.dtb from always being rebuilt

if_changed (used by the *.dts->*.dtc rule) rebuilds files if they aren't
contained in $(targets). (make V=2 indicates this). Add $(dtb-y) to
$(targets) to prevent *.dtb from always being rebuilt. Note

This fixes a regression introduced by the .dtb rule rework in da4cbc6
"arm64: use new common dtc rule", although since arm64 doesn't actually
have any *.dts yet, this isn't a critical issue.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
8 years agostaging: zram: fix invalid memory references during disk write
Nitin Gupta [Wed, 2 Jan 2013 16:53:41 +0000 (08:53 -0800)]
staging: zram: fix invalid memory references during disk write

Fixes a bug introduced by commit c8f2f0db1 ("zram: Fix handling
of incompressible pages") which caused invalid memory references
during disk write. Invalid references could occur in two cases:
 - Incoming data expands on compression: In this case, reference was
made to kunmap()'ed bio page.
 - Partial (non PAGE_SIZE) write with incompressible data: In this
case, reference was made to a kfree()'ed buffer.

Fixes bug 50081:
https://bugzilla.kernel.org/show_bug.cgi?id=50081

Signed-off-by: Nitin Gupta <ngupta@vflare.org>
Cc: stable <stable@vger.kernel.org>
Reported-by: Mihail Kasadjikov <hamer.mk@gmail.com>
Reported-by: Tomas M <tomas@slax.org>
Reviewed-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agoudldrmfb: udl_get_edid: drop unneeded i--
Hans de Goede [Fri, 11 Jan 2013 11:08:58 +0000 (12:08 +0100)]
udldrmfb: udl_get_edid: drop unneeded i--

This is a left-over from when udl_get_edid returned the amount of bytes
successfully read, which it no longer does.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
8 years agoudldrmfb: udl_get_edid: usb_control_msg buffer must not be on the stack
Hans de Goede [Fri, 11 Jan 2013 11:08:57 +0000 (12:08 +0100)]
udldrmfb: udl_get_edid: usb_control_msg buffer must not be on the stack

The buffer passed to usb_control_msg may end up in scatter-gather list, and
may thus not be on the stack. Having it on the stack usually works on x86, but
not on other archs.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
8 years agoudldrmfb: Fix EDID not working with monitors with EDID extension blocks
Hans de Goede [Fri, 11 Jan 2013 11:08:56 +0000 (12:08 +0100)]
udldrmfb: Fix EDID not working with monitors with EDID extension blocks

udldrmfb only reads the main EDID block, and if that advertises extensions
the drm_edid code expects them to be present, and starts reading beyond the
buffer udldrmfb passes it.

Although it may be possible to read more EDID info with the udl we simpy don't
know how, and even if trial and error gets it working on one device, that is
no guarantee it will work on other revisions. So this patch does a simple fix
in the form of patching the EDID info to report 0 extension blocks, this
fixes udldrmfb only doing 1024x768 on monitors with EDID extension blocks.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
8 years agoMerge branch 'drm-fixes-3.8' of git://people.freedesktop.org/~agd5f/linux into drm...
Dave Airlie [Sun, 13 Jan 2013 22:16:54 +0000 (08:16 +1000)]
Merge branch 'drm-fixes-3.8' of git://people.freedesktop.org/~agd5f/linux into drm-next

Fixes for UMS mode which has been broken for a while plus an rn50 fix
and a dma fix.

* 'drm-fixes-3.8' of git://people.freedesktop.org/~agd5f/linux:
  radeon/kms: fix dma relocation checking
  radeon/kms: force rn50 chip to always report connected on analog output
  drm/radeon: fix error path in kpage allocation
  drm/radeon: fix a bogus kfree
  drm/radeon: fix NULL pointer dereference in UMS mode

8 years agoMerge branch 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux...
Dave Airlie [Sun, 13 Jan 2013 22:15:36 +0000 (08:15 +1000)]
Merge branch 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-next

Regression fixes since rework mostly.

* 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6:
  drm/nvc0/fb: fix crash when different mutex is used to protect same list
  drm/nouveau/clock: fix support for more than 2 monitors on nve0
  drm/nv50/disp: fix selection of bios script for analog outputs
  drm/nv17-50: restore fence buffer on resume
  drm/nouveau: fix blank LVDS screen regression on pre-nv50 cards
  drm/nouveau: fix nouveau_client allocation failure path
  drm/nouveau: don't return freed object from nouveau_handle_create
  drm/nouveau/vm: fix memory corruption when pgt allocation fails
  drm/nouveau: add locking around instobj list operations
  drm/nouveau: do not forcibly power on lvds panels
  drm/nouveau/devinit: ensure legacy vga control is enabled during post

8 years agousb: ftdi_sio: Crucible Technologies COMET Caller ID - pid added
Tomasz Mloduchowski [Sun, 13 Jan 2013 22:32:53 +0000 (23:32 +0100)]
usb: ftdi_sio: Crucible Technologies COMET Caller ID - pid added

Simple fix to add support for Crucible Technologies COMET Caller ID
USB decoder - a device containing FTDI USB/Serial converter chip,
handling 1200bps CallerID messages decoded from the phone line -
adding correct USB PID is sufficient.

Tested to apply cleanly and work flawlessly against 3.6.9, 3.7.0-rc8
and 3.8.0-rc3 on both amd64 and x86 arches.

Signed-off-by: Tomasz Mloduchowski <q@qdot.me>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agonetfilter: x_tables: print correct hook names for ARP
Jan Engelhardt [Thu, 10 Jan 2013 12:30:05 +0000 (12:30 +0000)]
netfilter: x_tables: print correct hook names for ARP

arptables 0.0.4 (released on 10th Jan 2013) supports calling the
CLASSIFY target, but on adding a rule to the wrong chain, the
diagnostic is as follows:

# arptables -A INPUT -j CLASSIFY --set-class 0:0
arptables: Invalid argument
# dmesg | tail -n1
x_tables: arp_tables: CLASSIFY target: used from hooks
PREROUTING, but only usable from INPUT/FORWARD

This is incorrect, since xt_CLASSIFY.c does specify
(1 << NF_ARP_OUT) | (1 << NF_ARP_FORWARD).

This patch corrects the x_tables diagnostic message to print the
proper hook names for the NFPROTO_ARP case.

Affects all kernels down to and including v2.6.31.

Signed-off-by: Jan Engelhardt <jengelh@inai.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
8 years agodrm/nvc0/fb: fix crash when different mutex is used to protect same list
Aleksi Torhamo [Wed, 9 Jan 2013 18:08:48 +0000 (20:08 +0200)]
drm/nvc0/fb: fix crash when different mutex is used to protect same list

Fixes regression introduced in commit 861d2107
"drm/nouveau/fb: merge fb/vram and port to subdev interfaces"

nv50_fb_vram_{new,del} functions were changed to use
nouveau_subdev->mutex instead of the old nouveau_mm->mutex.
nvc0_fb_vram_new still uses the nouveau_mm->mutex, but nvc0 doesn't
have its own fb_vram_del function, using nv50_fb_vram_del instead.
Because of this, on nvc0 a different mutex ends up being used to protect
additions and deletions to the same list.

This patch is a -stable candidate for 3.7.

Signed-off-by: Aleksi Torhamo <aleksi@torhamo.net>
Reported-by: Roy Spliet <r.spliet@student.tudelft.nl>
Tested-by: Roy Spliet <r.spliet@student.tudelft.nl>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
8 years agodrm/nouveau/clock: fix support for more than 2 monitors on nve0
Aleksi Torhamo [Fri, 4 Jan 2013 16:39:13 +0000 (18:39 +0200)]
drm/nouveau/clock: fix support for more than 2 monitors on nve0

Fixes regression introduced in commit 70790f4f
"drm/nouveau/clock: pull in the implementation from all over the place"

When code was moved from nv50_crtc_set_clock to nvc0_clock_pll_set,
the PLLs it is used for got limited to only the first two VPLLs.

nv50_crtc_set_clock was only called to change VPLLs, so it didn't
limit what it was used for in any way. Since nvc0_clock_pll_set is
used for all PLLs, it has to specify which PLLs the code is used for,
and only listed the first two VPLLs.

Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=58735
This patch is a -stable candidate for 3.7.

Signed-off-by: Aleksi Torhamo <aleksi@torhamo.net>
Tested-by: Aleksi Torhamo <aleksi@torhamo.net>
Tested-by: Sean Santos <quantheory@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
8 years agodrm/nv50/disp: fix selection of bios script for analog outputs
Marcin Slusarz [Thu, 3 Jan 2013 18:38:45 +0000 (19:38 +0100)]
drm/nv50/disp: fix selection of bios script for analog outputs

Analog output number was overwritten by value from digital output path.
Fix it.

Fixes resume from s2ram: https://bugs.freedesktop.org/show_bug.cgi?id=58729
(as stumbled on by J Binder, Pontus Fuchs and me)
Fixes blank screen on module load (reported by Sune Mølgaard).

Fixes regression from commit 186ecad21c854385823a430b1402053ae7fd59dc
("drm/nv50/disp: move remaining interrupt handling into core").

Reported-by: J Binder <wheel@herr-der-mails.de>
Reported-by: Pontus Fuchs <pontus.fuchs@gmail.com>
Reported-by: Sune Mølgaard <sune@molgaard.org>
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Tested-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Tested-by: Sune Mølgaard <sune@molgaard.org>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
8 years agodrm/nv17-50: restore fence buffer on resume
Marcin Slusarz [Tue, 25 Dec 2012 17:13:22 +0000 (18:13 +0100)]
drm/nv17-50: restore fence buffer on resume

Since commit 5e120f6e4b3f35b741c5445dfc755f50128c3c44 "drm/nouveau/fence:
convert to exec engine, and improve channel sync" nouveau fence sync
implementation for nv17-50 and nvc0+ started to rely on state of fence buffer
left by previous sync operation. But as pinned bo's (where fence state is
stored) are not saved+restored across suspend/resume, we need to do it
manually.

nvc0+ was fixed by commit d6ba6d215a538a58f0f0026f0961b0b9125e8042
"drm/nvc0/fence: restore pre-suspend fence buffer context on resume".

Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=50121
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
8 years agodrm/nouveau: fix blank LVDS screen regression on pre-nv50 cards
Marcin Slusarz [Tue, 18 Dec 2012 19:30:47 +0000 (20:30 +0100)]
drm/nouveau: fix blank LVDS screen regression on pre-nv50 cards

Commit 2a44e499 ("drm/nouveau/disp: introduce proper init/fini, separate
from create/destroy") started to call display init routines on pre-nv50
hardware on module load. But LVDS init code sets driver state in a way
which prevents modesetting code from operating properly.

nv04_display_init calls nv04_dfp_restore, which sets encoder->last_dpms to
NV_DPMS_CLEARED.

drm_crtc_helper_set_mode
  nv04_dfp_prepare
    nv04_lvds_dpms(DRM_MODE_DPMS_OFF)

nv04_lvds_dpms checks last_dpms mode (which is NV_DPMS_CLEARED) and wrongly
assumes it's a "powersaving mode", the new one (DRM_MODE_DPMS_OFF) is too,
so it skips calling some crucial lvds scripts.

Reported-by: Chris Paulson-Ellis <chris@edesix.com>
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
8 years agodrm/nouveau: fix nouveau_client allocation failure path
Marcin Slusarz [Mon, 10 Dec 2012 20:59:52 +0000 (21:59 +0100)]
drm/nouveau: fix nouveau_client allocation failure path

Depending on the point of failure, freed object would be returned
or memory leak would happen.

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
8 years agodrm/nouveau: don't return freed object from nouveau_handle_create
Marcin Slusarz [Mon, 10 Dec 2012 20:57:20 +0000 (21:57 +0100)]
drm/nouveau: don't return freed object from nouveau_handle_create

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
8 years agodrm/nouveau/vm: fix memory corruption when pgt allocation fails
Marcin Slusarz [Mon, 10 Dec 2012 20:30:51 +0000 (21:30 +0100)]
drm/nouveau/vm: fix memory corruption when pgt allocation fails

If we return freed vm, nouveau_drm_open will happily call nouveau_cli_destroy,
which will try to free it again.

Reported-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
8 years agodrm/nouveau: add locking around instobj list operations
Marcin Slusarz [Sun, 2 Dec 2012 11:56:22 +0000 (12:56 +0100)]
drm/nouveau: add locking around instobj list operations

Fixes memory corruptions, oopses, etc. when multiple gpuobjs are
simultaneously created or destroyed.

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
8 years agodrm/nouveau: do not forcibly power on lvds panels
Ben Skeggs [Mon, 10 Dec 2012 08:53:43 +0000 (18:53 +1000)]
drm/nouveau: do not forcibly power on lvds panels

This fix was put in place to fix a bug where the eDP panel on certain
laptops fails to respond over the aux channel after suspend.

It appears that on some systems (Dell M6600, with LVDS panel) there's a
very bad interaction with the eDP init table that causes the SOR to get
very confused and not drive the panel correctly, leading to bleed.

A DPMS off/on cycle is enough to bring it back, but, this will avoid the
problem by not touching the panel GPIOs at times we're not meant to.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
8 years agodrm/nouveau/devinit: ensure legacy vga control is enabled during post
Ben Skeggs [Sun, 13 Jan 2013 07:08:01 +0000 (17:08 +1000)]
drm/nouveau/devinit: ensure legacy vga control is enabled during post

Fixes ACPI backlight control after suspend on some systems.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
8 years agobe2net: fix unconditionally returning IRQ_HANDLED in INTx
Sathya Perla [Fri, 11 Jan 2013 22:47:02 +0000 (22:47 +0000)]
be2net: fix unconditionally returning IRQ_HANDLED in INTx

commit e49cc34f introduced an unconditional IRQ_HANDLED return in be_intx()
to workaround Lancer and BE2 HW issues. This is bad as it prevents the kernel
from detecting interrupt storms due to broken HW.

The BE2/Lancer HW issues are:
1) In Lancer, there is no means for the driver to detect if the interrupt
belonged to device, other than counting and notifying events.
2) In Lancer de-asserting INTx takes a while, causing the INTx irq handler
to be called multiple times till the de-assert happens.
3) In BE2, we see an occasional interrupt even when EQs are unarmed.

Issue (1) can cause the notified events to be orphaned, if NAPI was already
running.
This patch fixes this issue by scheduling NAPI only if it is not scheduled
already. Doing this also takes care of possible events_get() race that may be
caused due to issue (2) and (3). Also, IRQ_HANDLED is returned only the first
time zero events are detected.
(Thanks Ben H. for the feedback and suggestions.)

Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agosparc: remove __devinit, __devexit annotations
Sam Ravnborg [Tue, 1 Jan 2013 15:02:33 +0000 (16:02 +0100)]
sparc: remove __devinit, __devexit annotations

__devinit, __devexit annotations are nops - so drop them.
Likewise for __devexit_p.

Adjusted alignment of arguments when needed.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agonetfilter: nf_conntrack: fix BUG_ON while removing nf_conntrack with netns
Pablo Neira Ayuso [Thu, 10 Jan 2013 15:12:01 +0000 (16:12 +0100)]
netfilter: nf_conntrack: fix BUG_ON while removing nf_conntrack with netns

canqun zhang reported that we're hitting BUG_ON in the
nf_conntrack_destroy path when calling kfree_skb while
rmmod'ing the nf_conntrack module.

Currently, the nf_ct_destroy hook is being set to NULL in the
destroy path of conntrack.init_net. However, this is a problem
since init_net may be destroyed before any other existing netns
(we cannot assume any specific ordering while releasing existing
netns according to what I read in recent emails).

Thanks to Gao feng for initial patch to address this issue.

Reported-by: canqun zhang <canqunzhang@gmail.com>
Acked-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
8 years agotuntap: fix leaking reference count
Jason Wang [Fri, 11 Jan 2013 16:59:34 +0000 (16:59 +0000)]
tuntap: fix leaking reference count

Reference count leaking of both module and sock were found:

- When a detached file were closed, its sock refcnt from device were not
  released, solving this by add the sock_put().
- The module were hold or drop unconditionally in TUNSETPERSIST, which means we
  if we set the persist flag for N times, we need unset it for another N
  times. Solving this by only hold or drop an reference when there's a flag
  change and also drop the reference count when the persist device is deleted.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agotuntap: forbid calling TUNSETIFF when detached
Jason Wang [Fri, 11 Jan 2013 16:59:33 +0000 (16:59 +0000)]
tuntap: forbid calling TUNSETIFF when detached

Michael points out that even after Stefan's fix the TUNSETIFF is still allowed
to create a new tap device. This because we only check tfile->tun but the
tfile->detached were introduced. Fix this by failing early in tun_set_iff() if
the file is detached. After this fix, there's no need to do the check again in
tun_set_iff(), so this patch removes it.

Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agotuntap: switch to use rtnl_dereference()
Jason Wang [Fri, 11 Jan 2013 16:59:32 +0000 (16:59 +0000)]
tuntap: switch to use rtnl_dereference()

Switch to use rtnl_dereference() instead of the open code, suggested by Eric.

Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agousb: host: ohci-tmio: fix compile warning
Felipe Balbi [Thu, 10 Jan 2013 12:32:39 +0000 (14:32 +0200)]
usb: host: ohci-tmio: fix compile warning

Fix the following compile warning:

In file included from drivers/usb/host/ohci-hcd.c:1170:0:
drivers/usb/host/ohci-tmio.c: In function 'tmio_start_hc':
drivers/usb/host/ohci-tmio.c:130:2: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 4 has type 'resource_size_t' [-Wformat]

seen on ARM 32-bit builds.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agoUSB: Add device quirk for Microsoft VX700 webcam
Andreas Fleig [Wed, 5 Dec 2012 15:17:49 +0000 (16:17 +0100)]
USB: Add device quirk for Microsoft VX700 webcam

Add device quirk for Microsoft Lifecam VX700 v2.0 webcams.
Fixes squeaking noise of the microphone.

Signed-off-by: Andreas Fleig <andreasfleig@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agoUSB: ehci-fsl: fix regression on mpc5121e
Anatolij Gustschin [Tue, 4 Dec 2012 13:24:30 +0000 (14:24 +0100)]
USB: ehci-fsl: fix regression on mpc5121e

mpc5121e doesn't have system interface registers, accessing this
register address space cause the machine check exception and a
kernel crash:

...
Machine check in kernel mode.
Caused by (from SRR1=49030): Transfer error ack signal
Oops: Machine check, sig: 7 [#1]
MPC5121 ADS
Modules linked in:
NIP: c025fd60 LR: c0265bb4 CTR: 00000000
REGS: df82dac0 TRAP: 0200   Not tainted
(3.7.0-rc7-00641-g81e6c91)
MSR: 00049030 <EE,ME,IR,DR>  CR: 42002024  XER: 20000000
TASK = df824b70[1] 'swapper' THREAD: df82c000
GPR00: 00000000 df82db70 df824b70 df3ed0f0 00000003 00000000 00000000 00000000
GPR08: 00000020 32000000 c03550ec 20000000 22002028 00000000 c0003f5c 00000000
GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 c0423898 c0450000
GPR24: 00000077 00000002 e5086180 1c000c00 e5086000 df33ec00 00000003 df34e000
NIP [c025fd60] ehci_fsl_setup_phy+0xd0/0x354
LR [c0265bb4] ehci_fsl_setup+0x220/0x284
...

Fix it by checking 'have_sysif_regs' flag before register access.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agousb: chipidea: Allow disabling streaming not only in udc mode
Fabio Estevam [Sat, 22 Dec 2012 11:24:11 +0000 (09:24 -0200)]
usb: chipidea: Allow disabling streaming not only in udc mode

When running a scp transfer using a USB/Ethernet adapter the following crash
happens:

$ scp test.tar.gz fabio@192.168.1.100:/home/fabio
fabio@192.168.1.100's password:
test.tar.gz                                      0%    0     0.0KB/s   --:-- ETA
------------[ cut here ]------------
WARNING: at net/sched/sch_generic.c:255 dev_watchdog+0x2cc/0x2f0()
NETDEV WATCHDOG: eth0 (asix): transmit queue 0 timed out
Modules linked in:
Backtrace:
[<80011c94>] (dump_backtrace+0x0/0x10c) from [<804d3a5c>] (dump_stack+0x18/0x1c)
 r6:000000ff r5:80412388 r4:80685dc0 r3:80696cc0
[<804d3a44>] (dump_stack+0x0/0x1c) from [<80021868>]
(warn_slowpath_common+0x54/0x6c)
[<80021814>] (warn_slowpath_common+0x0/0x6c) from [<80021924>]
(warn_slowpath_fmt+0x38/0x40)
...

Setting SDIS (Stream Disable Mode- bit 4 of USBMODE register) fixes the problem.

However, in current code CI13XXX_DISABLE_STREAMING flag is only set in udc mode,
so allow disabling streaming also in host mode.

Tested on a mx6qsabrelite board.

Suggested-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agoUSB: fsl-mph-dr-of: fix regression on mpc5121e
Anatolij Gustschin [Tue, 4 Dec 2012 13:23:21 +0000 (14:23 +0100)]
USB: fsl-mph-dr-of: fix regression on mpc5121e

fsl-ehci probing fails on mpc5121e:
...
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1
fsl-ehci fsl-ehci.0: Could not get controller version
fsl-ehci fsl-ehci.0: can't setup
fsl-ehci fsl-ehci.0: USB bus 1 deregistered
fsl-ehci fsl-ehci.0: init fsl-ehci.0 fail, -22
fsl-ehci: probe of fsl-ehci.0 failed with error -22

Fix it by returning appropriate version info for mpc5121, too.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agoUSB: select USB_ARCH_HAS_EHCI for MXS
Maxime Ripard [Fri, 11 Jan 2013 17:06:21 +0000 (18:06 +0100)]
USB: select USB_ARCH_HAS_EHCI for MXS

Commit 09f6ffde (USB: EHCI: fix build error by making ChipIdea host a
normal EHCI driver) introduced a dependency on USB_EHCI_HCD for the
chipidea USB host driver, that in turns depends on USB_ARCH_HAS_EHCI.

If this symbol is not set for MXS, the MXS boards are not able to use
the chipidea driver anymore.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agonet, wireless: overwrite default_ethtool_ops
Stanislaw Gruszka [Thu, 10 Jan 2013 23:19:10 +0000 (23:19 +0000)]
net, wireless: overwrite default_ethtool_ops

Since:

commit 2c60db037034d27f8c636403355d52872da92f81
Author: Eric Dumazet <edumazet@google.com>
Date:   Sun Sep 16 09:17:26 2012 +0000

    net: provide a default dev->ethtool_ops

wireless core does not correctly assign ethtool_ops.

After alloc_netdev*() call, some cfg80211 drivers provide they own
ethtool_ops, but some do not. For them, wireless core provide generic
cfg80211_ethtool_ops, which is assigned in NETDEV_REGISTER notify call:

        if (!dev->ethtool_ops)
                dev->ethtool_ops = &cfg80211_ethtool_ops;

But after Eric's commit, dev->ethtool_ops is no longer NULL (on cfg80211
drivers without custom ethtool_ops), but points to &default_ethtool_ops.

In order to fix the problem, provide function which will overwrite
default_ethtool_ops and use it by wireless core.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agoqlge: remove NETIF_F_TSO6 flag
Amerigo Wang [Thu, 10 Jan 2013 22:52:54 +0000 (22:52 +0000)]
qlge: remove NETIF_F_TSO6 flag

It is werid that qlge driver supports NETIF_F_TSO6 but
not NETIF_F_IPV6_CSUM. This also causes some kernel warning [1]
when VLAN device setups on a qlge interface.

I think the qlge hardware doesn't support NETIF_F_IPV6_CSUM,
so we have to just remove the NETIF_F_TSO6 flag.

After this patch, the TCP/IPv6 traffic becomes normal again,
no kernel warnings any more.

NOTE: I only tested it on 2.6.32 kernel, even if the upstream
kernel could fix this automatically (it is hard to track NETIF*
flags), removing it is also safe.

1. https://bugzilla.redhat.com/show_bug.cgi?id=891839

Cc: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Cc: Ron Mercer <ron.mercer@qlogic.com>
Cc: linux-driver@qlogic.com
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <amwang@redhat.com>
Acked-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agoMerge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck...
Linus Torvalds [Fri, 11 Jan 2013 22:56:41 +0000 (14:56 -0800)]
Merge tag 'hwmon-for-linus' of git://git./linux/kernel/git/groeck/linux-staging

Pull a hwmon patch from Guenter Roeck:
 "Fix build error in vexpress driver"

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (vexpress) Fix build error seen if CONFIG_OF_DEVICE is not set

8 years agoMerge branch 'akpm' (incoming fixes from Andrew)
Linus Torvalds [Fri, 11 Jan 2013 22:55:15 +0000 (14:55 -0800)]
Merge branch 'akpm' (incoming fixes from Andrew)

Merge misc fixes from Andrew Morton:
 "The audit fixes have been floating around for a while - Al and Eric
  aren't responding to either myself or Kees so I asked Kees to
  re-review them and here they are."

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (22 commits)
  lib/rbtree.c: avoid the use of non-static __always_inline
  MAINTAINERS: Omar had moved
  mm: compaction: partially revert capture of suitable high-order page
  linux/audit.h: move ptrace.h include to kernel header
  kernel/audit.c: avoid negative sleep durations
  audit: catch possible NULL audit buffers
  audit: create explicit AUDIT_SECCOMP event type
  MAINTAINERS: fix a status pattern
  MAINTAINERS: fix arch/arm/plat-omap/include/plat/omap_hwmod.h
  mm: thp: acquire the anon_vma rwsem for write during split
  mm: mmap: annotate vm_lock_anon_vma locking properly for lockdep
  lockdep, rwsem: provide down_write_nest_lock()
  arch/mn10300/Kconfig: select CONFIG_GENERIC_ATOMIC64
  mm: bootmem: fix free_all_bootmem_core() with odd bitmap alignment
  mm: use aligned zone start for pfn_to_bitidx calculation
  fs/exec.c: work around icc miscompilation
  mm: compaction: fix echo 1 > compact_memory return error issue
  mm: memblock: fix wrong memmove size in memblock_merge_regions()
  drivers/video/ssd1307fb.c: fix bit order bug in the byte translation function
  mm: migrate: check page_count of THP before migrating
  ...

8 years agolib/rbtree.c: avoid the use of non-static __always_inline
Michel Lespinasse [Fri, 11 Jan 2013 22:32:20 +0000 (14:32 -0800)]
lib/rbtree.c: avoid the use of non-static __always_inline

lib/rbtree.c declared __rb_erase_color() as __always_inline void, and
then exported it with EXPORT_SYMBOL.

This was because __rb_erase_color() must be exported for augmented
rbtree users, but it must also be inlined into rb_erase() so that the
dummy callback can get optimized out of that call site.

(Actually with a modern compiler, none of the dummy callback functions
should even be generated as separate text functions).

The above usage is legal C, but it was unusual enough for some compilers
to warn about it.  This change makes things more explicit, with a static
__always_inline ____rb_erase_color function for use in rb_erase(), and a
separate non-inline __rb_erase_color function for use in
rb_erase_augmented call sites.

Signed-off-by: Michel Lespinasse <walken@google.com>
Reported-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoMAINTAINERS: Omar had moved
Chen Gang [Fri, 11 Jan 2013 22:32:17 +0000 (14:32 -0800)]
MAINTAINERS: Omar had moved

Signed-off-by: Chen Gang <gang.chen@asianux.com>
Cc: Omar Ramirez Luna <omar.ramirez@ti.com>
Cc: Omar Ramirez Luna <omar.ramirez@copitl.com>
Cc: David Miller <davem@davemloft.net>
Cc: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm: compaction: partially revert capture of suitable high-order page
Mel Gorman [Fri, 11 Jan 2013 22:32:16 +0000 (14:32 -0800)]
mm: compaction: partially revert capture of suitable high-order page

Eric Wong reported on 3.7 and 3.8-rc2 that ppoll() got stuck when
waiting for POLLIN on a local TCP socket.  It was easier to trigger if
there was disk IO and dirty pages at the same time and he bisected it to
commit 1fb3f8ca0e92 ("mm: compaction: capture a suitable high-order page
immediately when it is made available").

The intention of that patch was to improve high-order allocations under
memory pressure after changes made to reclaim in 3.6 drastically hurt
THP allocations but the approach was flawed.  For Eric, the problem was
that page->pfmemalloc was not being cleared for captured pages leading
to a poor interaction with swap-over-NFS support causing the packets to
be dropped.  However, I identified a few more problems with the patch
including the fact that it can increase contention on zone->lock in some
cases which could result in async direct compaction being aborted early.

In retrospect the capture patch took the wrong approach.  What it should
have done is mark the pageblock being migrated as MIGRATE_ISOLATE if it
was allocating for THP and avoided races that way.  While the patch was
showing to improve allocation success rates at the time, the benefit is
marginal given the relative complexity and it should be revisited from
scratch in the context of the other reclaim-related changes that have
taken place since the patch was first written and tested.  This patch
partially reverts commit 1fb3f8ca0e92 ("mm: compaction: capture a
suitable high-order page immediately when it is made available").

Reported-and-tested-by: Eric Wong <normalperson@yhbt.net>
Tested-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agolinux/audit.h: move ptrace.h include to kernel header
Mike Frysinger [Fri, 11 Jan 2013 22:32:13 +0000 (14:32 -0800)]
linux/audit.h: move ptrace.h include to kernel header

While the kernel internals want pt_regs (and so it includes
linux/ptrace.h), the user version of audit.h does not need it.  So move
the include out of the uapi version.

This avoids issues where people want the audit defines and userland
ptrace api.  Including both the kernel ptrace and the userland ptrace
headers can easily lead to failure.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agokernel/audit.c: avoid negative sleep durations
Andrew Morton [Fri, 11 Jan 2013 22:32:11 +0000 (14:32 -0800)]
kernel/audit.c: avoid negative sleep durations

audit_log_start() performs the same jiffies comparison in two places.
If sufficient time has elapsed between the two comparisons, the second
one produces a negative sleep duration:

  schedule_timeout: wrong timeout value fffffffffffffff0
  Pid: 6606, comm: trinity-child1 Not tainted 3.8.0-rc1+ #43
  Call Trace:
    schedule_timeout+0x305/0x340
    audit_log_start+0x311/0x470
    audit_log_exit+0x4b/0xfb0
    __audit_syscall_exit+0x25f/0x2c0
    sysret_audit+0x17/0x21

Fix it by performing the comparison a single time.

Reported-by: Dave Jones <davej@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoaudit: catch possible NULL audit buffers
Kees Cook [Fri, 11 Jan 2013 22:32:07 +0000 (14:32 -0800)]
audit: catch possible NULL audit buffers

It's possible for audit_log_start() to return NULL.  Handle it in the
various callers.

Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Cc: Jeff Layton <jlayton@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Julien Tinnes <jln@google.com>
Cc: Will Drewry <wad@google.com>
Cc: Steve Grubb <sgrubb@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoaudit: create explicit AUDIT_SECCOMP event type
Kees Cook [Fri, 11 Jan 2013 22:32:05 +0000 (14:32 -0800)]
audit: create explicit AUDIT_SECCOMP event type

The seccomp path was using AUDIT_ANOM_ABEND from when seccomp mode 1
could only kill a process.  While we still want to make sure an audit
record is forced on a kill, this should use a separate record type since
seccomp mode 2 introduces other behaviors.

In the case of "handled" behaviors (process wasn't killed), only emit a
record if the process is under inspection.  This change also fixes
userspace examination of seccomp audit events, since it was considered
malformed due to missing fields of the AUDIT_ANOM_ABEND event type.

Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Cc: Jeff Layton <jlayton@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Julien Tinnes <jln@google.com>
Acked-by: Will Drewry <wad@chromium.org>
Acked-by: Steve Grubb <sgrubb@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoMAINTAINERS: fix a status pattern
Zhang Yanfei [Fri, 11 Jan 2013 22:32:04 +0000 (14:32 -0800)]
MAINTAINERS: fix a status pattern

Change MAINTAINED to Maintained.

Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoMAINTAINERS: fix arch/arm/plat-omap/include/plat/omap_hwmod.h
Zhang Yanfei [Fri, 11 Jan 2013 22:32:03 +0000 (14:32 -0800)]
MAINTAINERS: fix arch/arm/plat-omap/include/plat/omap_hwmod.h

This file was moved to arch/arm/mach-omap2/omap=5Fhwmod.h by commit
2a296c8f89bc ("ARM: OMAP: Make plat/omap=5Fhwmod.h local to
mach-omap2").

Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm: thp: acquire the anon_vma rwsem for write during split
Mel Gorman [Fri, 11 Jan 2013 22:32:02 +0000 (14:32 -0800)]
mm: thp: acquire the anon_vma rwsem for write during split

Zhouping Liu reported the following against 3.8-rc1 when running a mmap
testcase from LTP.

  mapcount 0 page_mapcount 3
  ------------[ cut here ]------------
  kernel BUG at mm/huge_memory.c:1798!
  invalid opcode: 0000 [#1] SMP
  Modules linked in: ip6table_filter ip6_tables ebtable_nat ebtables bnep bluetooth rfkill iptable_mangle ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack iptable_filter ip_tables be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb4i cxgb4 cxgb3i cxgb3 mdio libcxgbi ib_iser rdma_cm ib_addr iw_cm ib_cm ib_sa ib_mad ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi vfat fat dm_mirror dm_region_hash dm_log dm_mod cdc_ether iTCO_wdt i7core_edac coretemp usbnet iTCO_vendor_support mii crc32c_intel edac_core lpc_ich shpchp ioatdma mfd_core i2c_i801 pcspkr serio_raw bnx2 microcode dca vhost_net tun macvtap macvlan kvm_intel kvm uinput mgag200 sr_mod cdrom i2c_algo_bit sd_mod drm_kms_helper crc_t10dif ata_generic pata_acpi ttm ata_piix drm libata i2c_core megaraid_sas
  CPU 1
  Pid: 23217, comm: mmap10 Not tainted 3.8.0-rc1mainline+ #17 IBM IBM System x3400 M3 Server -[7379I08]-/69Y4356
  RIP: __split_huge_page+0x677/0x6d0
  RSP: 0000:ffff88017a03fc08  EFLAGS: 00010293
  RAX: 0000000000000003 RBX: ffff88027a6c22e0 RCX: 00000000000034d2
  RDX: 000000000000748b RSI: 0000000000000046 RDI: 0000000000000246
  RBP: ffff88017a03fcb8 R08: ffffffff819d2440 R09: 000000000000054a
  R10: 0000000000aaaaaa R11: 00000000ffffffff R12: 0000000000000000
  R13: 00007f4f11a00000 R14: ffff880179e96e00 R15: ffffea0005c08000
  FS:  00007f4f11f4a740(0000) GS:ffff88017bc20000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
  CR2: 00000037e9ebb404 CR3: 000000017a436000 CR4: 00000000000007e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
  Process mmap10 (pid: 23217, threadinfo ffff88017a03e000, task ffff880172dd32e0)
  Stack:
   ffff88017a540ec8 ffff88017a03fc20 ffffffff816017b5 ffff88017a03fc88
   ffffffff812fa014 0000000000000000 ffff880279ebd5c0 00000000f4f11a4c
   00000007f4f11f49 00000007f4f11a00 ffff88017a540ef0 ffff88017a540ee8
  Call Trace:
    split_huge_page+0x68/0xb0
    __split_huge_page_pmd+0x134/0x330
    split_huge_page_pmd_mm+0x51/0x60
    split_huge_page_address+0x3b/0x50
    __vma_adjust_trans_huge+0x9c/0xf0
    vma_adjust+0x684/0x750
    __split_vma.isra.28+0x1fa/0x220
    do_munmap+0xf9/0x420
    vm_munmap+0x4e/0x70
    sys_munmap+0x2b/0x40
    system_call_fastpath+0x16/0x1b

Alexander Beregalov and Alex Xu reported similar bugs and Hillf Danton
identified that commit 5a505085f043 ("mm/rmap: Convert the struct
anon_vma::mutex to an rwsem") and commit 4fc3f1d66b1e ("mm/rmap,
migration: Make rmap_walk_anon() and try_to_unmap_anon() more scalable")
were likely the problem.  Reverting these commits was reported to solve
the problem for Alexander.

Despite the reason for these commits, NUMA balancing is not the direct
source of the problem.  split_huge_page() expects the anon_vma lock to
be exclusive to serialise the whole split operation.  Ordinarily it is
expected that the anon_vma lock would only be required when updating the
avcs but THP also uses the anon_vma rwsem for collapse and split
operations where the page lock or compound lock cannot be used (as the
page is changing from base to THP or vice versa) and the page table
locks are insufficient.

This patch takes the anon_vma lock for write to serialise against parallel
split_huge_page as THP expected before the conversion to rwsem.

Reported-and-tested-by: Zhouping Liu <zliu@redhat.com>
Reported-by: Alexander Beregalov <a.beregalov@gmail.com>
Reported-by: Alex Xu <alex_y_xu@yahoo.ca>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm: mmap: annotate vm_lock_anon_vma locking properly for lockdep
Jiri Kosina [Fri, 11 Jan 2013 22:31:59 +0000 (14:31 -0800)]
mm: mmap: annotate vm_lock_anon_vma locking properly for lockdep

Commit 5a505085f043 ("mm/rmap: Convert the struct anon_vma::mutex to an
rwsem") turned anon_vma mutex to rwsem.

However, the properly annotated nested locking in mm_take_all_locks()
has been converted from

mutex_lock_nest_lock(&anon_vma->root->mutex, &mm->mmap_sem);

to

down_write(&anon_vma->root->rwsem);

which is incomplete, and causes the false positive report from lockdep
below.

Annotate the fact that mmap_sem is used as an outter lock to serialize
taking of all the anon_vma rwsems at once no matter the order, using the
down_write_nest_lock() primitive.

This patch fixes this lockdep report:

 =============================================
 [ INFO: possible recursive locking detected ]
 3.8.0-rc2-00036-g5f73896 #171 Not tainted
 ---------------------------------------------
 qemu-kvm/2315 is trying to acquire lock:
  (&anon_vma->rwsem){+.+...}, at: mm_take_all_locks+0x149/0x1b0

 but task is already holding lock:
  (&anon_vma->rwsem){+.+...}, at: mm_take_all_locks+0x149/0x1b0

 other info that might help us debug this:
  Possible unsafe locking scenario:

        CPU0
        ----
   lock(&anon_vma->rwsem);
   lock(&anon_vma->rwsem);

  *** DEADLOCK ***

  May be due to missing lock nesting notation

 4 locks held by qemu-kvm/2315:
  #0:  (&mm->mmap_sem){++++++}, at: do_mmu_notifier_register+0xfc/0x170
  #1:  (mm_all_locks_mutex){+.+...}, at: mm_take_all_locks+0x36/0x1b0
  #2:  (&mapping->i_mmap_mutex){+.+...}, at: mm_take_all_locks+0xc9/0x1b0
  #3:  (&anon_vma->rwsem){+.+...}, at: mm_take_all_locks+0x149/0x1b0

 stack backtrace:
 Pid: 2315, comm: qemu-kvm Not tainted 3.8.0-rc2-00036-g5f73896 #171
 Call Trace:
   print_deadlock_bug+0xf2/0x100
   validate_chain+0x4f6/0x720
   __lock_acquire+0x359/0x580
   lock_acquire+0x121/0x190
   down_write+0x3f/0x70
   mm_take_all_locks+0x149/0x1b0
   do_mmu_notifier_register+0x68/0x170
   mmu_notifier_register+0xe/0x10
   kvm_create_vm+0x22b/0x330 [kvm]
   kvm_dev_ioctl+0xf8/0x1a0 [kvm]
   do_vfs_ioctl+0x9d/0x350
   sys_ioctl+0x91/0xb0
   system_call_fastpath+0x16/0x1b

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mel Gorman <mel@csn.ul.ie>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agolockdep, rwsem: provide down_write_nest_lock()
Jiri Kosina [Fri, 11 Jan 2013 22:31:56 +0000 (14:31 -0800)]
lockdep, rwsem: provide down_write_nest_lock()

down_write_nest_lock() provides a means to annotate locking scenario
where an outer lock is guaranteed to serialize the order nested locks
are being acquired.

This is analogoue to already existing mutex_lock_nest_lock() and
spin_lock_nest_lock().

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mel Gorman <mel@csn.ul.ie>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoarch/mn10300/Kconfig: select CONFIG_GENERIC_ATOMIC64
Andrew Morton [Fri, 11 Jan 2013 22:31:54 +0000 (14:31 -0800)]
arch/mn10300/Kconfig: select CONFIG_GENERIC_ATOMIC64

mn10300 doesn't provide its own atomic64 implementation, so it should pull
in the generic one.

Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm: bootmem: fix free_all_bootmem_core() with odd bitmap alignment
Max Filippov [Fri, 11 Jan 2013 22:31:52 +0000 (14:31 -0800)]
mm: bootmem: fix free_all_bootmem_core() with odd bitmap alignment

Currently free_all_bootmem_core ignores that node_min_pfn may be not
multiple of BITS_PER_LONG.  Eg commit 6dccdcbe2c3e ("mm: bootmem: fix
checking the bitmap when finally freeing bootmem") shifts vec by lower
bits of start instead of lower bits of idx.  Also

  if (IS_ALIGNED(start, BITS_PER_LONG) && vec == ~0UL)

assumes that vec bit 0 corresponds to start pfn, which is only true when
node_min_pfn is a multiple of BITS_PER_LONG.  Also loop in the else
clause can double-free pages (e.g.  with node_min_pfn == start == 1,
map[0] == ~0 on 32-bit machine page 32 will be double-freed).

This bug causes the following message during xtensa kernel boot:

  bootmem::free_all_bootmem_core nid=0 start=1 end=8000
  BUG: Bad page state in process swapper  pfn:00001
  page:d04bd020 count:0 mapcount:-127 mapping:  (null) index:0x2
  page flags: 0x0()
  Call Trace:
    bad_page+0x8c/0x9c
    free_pages_prepare+0x5e/0x88
    free_hot_cold_page+0xc/0xa0
    __free_pages+0x24/0x38
    __free_pages_bootmem+0x54/0x56
    free_all_bootmem_core$part$11+0xeb/0x138
    free_all_bootmem+0x46/0x58
    mem_init+0x25/0xa4
    start_kernel+0x11e/0x25c
    should_never_return+0x0/0x3be7

The fix is the following:
 - always align vec so that its bit 0 corresponds to start
 - provide BITS_PER_LONG bits in vec, if those bits are available in the
   map
 - don't free pages past next start position in the else clause.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Cc: Gavin Shan <shangw@linux.vnet.ibm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Prasad Koya <prasad.koya@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm: use aligned zone start for pfn_to_bitidx calculation
Laura Abbott [Fri, 11 Jan 2013 22:31:51 +0000 (14:31 -0800)]
mm: use aligned zone start for pfn_to_bitidx calculation

The current calculation in pfn_to_bitidx assumes that (pfn -
zone->zone_start_pfn) >> pageblock_order will return the same bit for
all pfn in a pageblock.  If zone_start_pfn is not aligned to
pageblock_nr_pages, this may not always be correct.

Consider the following with pageblock order = 10, zone start 2MB:

  pfn     | pfn - zone start | (pfn - zone start) >> page block order
  ----------------------------------------------------------------
  0x26000 | 0x25e00    |  0x97
  0x26100 | 0x25f00    |  0x97
  0x26200 | 0x26000    |  0x98
  0x26300 | 0x26100    |  0x98

This means that calling {get,set}_pageblock_migratetype on a single page
will not set the migratetype for the full block.  Fix this by rounding
down zone_start_pfn when doing the bitidx calculation.

For our use case, the effects of this bug were mostly tied to the fact
that CMA allocations would either take a long time or fail to happen.
Depending on the driver using CMA, this could result in anything from
visual glitches to application failures.

Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agofs/exec.c: work around icc miscompilation
Xi Wang [Fri, 11 Jan 2013 22:31:48 +0000 (14:31 -0800)]
fs/exec.c: work around icc miscompilation

The tricky problem is this check:

if (i++ >= max)

icc (mis)optimizes this check as:

if (++i > max)

The check now becomes a no-op since max is MAX_ARG_STRINGS (0x7FFFFFFF).

This is "allowed" by the C standard, assuming i++ never overflows,
because signed integer overflow is undefined behavior.  This
optimization effectively reverts the previous commit 362e6663ef23
("exec.c, compat.c: fix count(), compat_count() bounds checking") that
tries to fix the check.

This patch simply moves ++ after the check.

Signed-off-by: Xi Wang <xi.wang@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm: compaction: fix echo 1 > compact_memory return error issue
Jason Liu [Fri, 11 Jan 2013 22:31:47 +0000 (14:31 -0800)]
mm: compaction: fix echo 1 > compact_memory return error issue

when run the folloing command under shell, it will return error

  sh/$ echo 1 > /proc/sys/vm/compact_memory
  sh/$ sh: write error: Bad address

After strace, I found the following log:

  ...
  write(1, "1\n", 2)               = 3
  write(1, "", 4294967295)         = -1 EFAULT (Bad address)
  write(2, "echo: write error: Bad address\n", 31echo: write error: Bad address
  ) = 31

This tells system return 3(COMPACT_COMPLETE) after write data to
compact_memory.

The fix is to make the system just return 0 instead 3(COMPACT_COMPLETE)
from sysctl_compaction_handler after compaction_nodes finished.

Signed-off-by: Jason Liu <r64343@freescale.com>
Suggested-by: David Rientjes <rientjes@google.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm: memblock: fix wrong memmove size in memblock_merge_regions()
Lin Feng [Fri, 11 Jan 2013 22:31:44 +0000 (14:31 -0800)]
mm: memblock: fix wrong memmove size in memblock_merge_regions()

The memmove span covers from (next+1) to the end of the array, and the
index of next is (i+1), so the index of (next+1) is (i+2).  So the size
of remaining array elements is (type->cnt - (i + 2)).

Since the remaining elements of the memblock array are move forward by
one element and there is only one additional element caused by this bug.
So there won't be any write overflow here but read overflow.  It may
read one more element out of the array address if the array happens to
be full.  Commonly it doesn't matter at all but if the array happens to
be located at the end a memblock, it may cause a invalid read operation
for the physical address doesn't exist.

There are 2 *happens to be* here, so I think the probability is quite
low, I don't know if any guy is haunted by this bug before.

Mostly I think it's user-invisible.

Signed-off-by: Lin Feng <linfeng@cn.fujitsu.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agodrivers/video/ssd1307fb.c: fix bit order bug in the byte translation function
Maxime Ripard [Fri, 11 Jan 2013 22:31:43 +0000 (14:31 -0800)]
drivers/video/ssd1307fb.c: fix bit order bug in the byte translation function

This was leading to a strange behaviour when using the fbcon driver on
top of this one: the letters were in the right order, but each letter
had a vertical symmetry.

This was because the addressing was right for the byte, but the
addressing of each individual bit was inverted.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Brian Lilly <brian@crystalfontz.com>
Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Thomas Petazzoni <thomas@free-electrons.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>