~shefty/rdma-dev.git
9 years agospi/fsl-espi: Make sure pm is within 2..32
Sebastian Andrzej Siewior [Thu, 15 Mar 2012 17:42:32 +0000 (18:42 +0100)]
spi/fsl-espi: Make sure pm is within 2..32

The reference manual says that pm has to stay within 2 and 32. So the
lowest frequency is 32 and DIV16 set, the highest is 2 and DIV16 unset.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
9 years agospi/fsl-espi: make the clock computation easier to read
Sebastian Andrzej Siewior [Thu, 15 Mar 2012 17:42:31 +0000 (18:42 +0100)]
spi/fsl-espi: make the clock computation easier to read

The -1 +1 thingy should probably do what DIV_ROUND_UP does. The 4 is 2
the  "platform_clock => sysclock" and 2 from the computation part. The 64
is the same 4 times 16.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
9 years agospi: sh-hspi: modify write/read method
Kuninori Morimoto [Wed, 14 Mar 2012 09:48:25 +0000 (02:48 -0700)]
spi: sh-hspi: modify write/read method

Current sh-hspi had wrong write/read method which was not linux standard.
If spi_transfer requests tx[2], rx[2] len=2,
then, driver should run tx[0], rx[0], tx[1], rx[1].
But current sh-hspi runs tx[0], tx[1], rx[0], rx[1].
This patch fixes it up.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
9 years agospi: sh-hspi: control spi clock more correctly
Kuninori Morimoto [Wed, 14 Mar 2012 09:48:05 +0000 (02:48 -0700)]
spi: sh-hspi: control spi clock more correctly

Current sh-hspi had used platform-specific speed.
This patch remove it, and use spi_transfer specific speed.
It removes unnecessary flags from struct sh_hspi_info,
but struct sh_hspi_info is still exist, since sh-hspi needs
platform info in the future.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
9 years agospi: sh-hspi: convert to using core message queue
Kuninori Morimoto [Wed, 14 Mar 2012 09:47:40 +0000 (02:47 -0700)]
spi: sh-hspi: convert to using core message queue

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
9 years agospi: s3c64xx: Fix build
Mark Brown [Wed, 14 Mar 2012 16:52:14 +0000 (16:52 +0000)]
spi: s3c64xx: Fix build

Commit 054ebc (spi: Compatibility with direction which is used in samsung
DMA operation) does not build as one hunk adds a brace to the first branch
of an if statement without adding at least the correspoding close. Remove
the unwanted brace.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
9 years agospi: s3c64xx: remove unnecessary callback msg->complete
Kuninori Morimoto [Wed, 14 Mar 2012 00:19:05 +0000 (17:19 -0700)]
spi: s3c64xx: remove unnecessary callback msg->complete

msg->complete will be called in spi_finalize_current_message().

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
9 years agospi: remove redundant variable assignment
Guennadi Liakhovetski [Wed, 14 Mar 2012 17:37:15 +0000 (18:37 +0100)]
spi: remove redundant variable assignment

The status variable is guaranteed to be 0 at that location anyway.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
9 years agospi: release lock on error path in spi_pump_messages()
Dan Carpenter [Sat, 10 Mar 2012 08:57:29 +0000 (11:57 +0300)]
spi: release lock on error path in spi_pump_messages()

We should release the lock here and enable IRQs before returning.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
[grant.likely: move unlock above dev_err() call]
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
9 years agospi: Compatibility with direction which is used in samsung DMA operation
Kyoungil Kim [Sat, 10 Mar 2012 00:48:46 +0000 (09:48 +0900)]
spi: Compatibility with direction which is used in samsung DMA operation

I found that there are two kind of direction type.
First one is dma_data_direction defined in include/linux/dma-direction.h.
It is used for parameter of dma_map/unmap_single in spi-s3c64xx.
The other one is dma_transter_direction defined in include/linux/dmaengine.h.
It is used for direction of samsung DMA operation
(arch/arm/plat-samsung/dma-ops.c).
This patch is just some changes to use direction defines
which is used in samsung DMA operation.

Signed-off-by: Boojin Kim <boojin.kim@samsung.com>
Signed-off-by: Kyoungil Kim <ki0351.kim@samsung.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
9 years agospi-topcliff-pch: add recovery processing in case wait-event timeout
Tomoya MORINAGA [Fri, 9 Dec 2011 04:13:29 +0000 (13:13 +0900)]
spi-topcliff-pch: add recovery processing in case wait-event timeout

Currently, pch_spi_start_transfer failure is not anticipated.
This patch adds the processing.

Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
9 years agospi-topcliff-pch: supports a spi mode setup and bit order setup by IO control
Tomoya MORINAGA [Fri, 9 Dec 2011 04:13:28 +0000 (13:13 +0900)]
spi-topcliff-pch: supports a spi mode setup and bit order setup by IO control

This patch supports a spi mode setup and bit order setup by IO control.
    spi mode:     mode 0 to mode 3
    bit order:    LSB first, MSB first

Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
9 years agospi-topcliff-pch: Fix issue for transmitting over 4KByte
Tomoya MORINAGA [Fri, 9 Dec 2011 04:13:27 +0000 (13:13 +0900)]
spi-topcliff-pch: Fix issue for transmitting over 4KByte

Currently, when spi-topcliff-pch receives transmit request over 4KByte,
this driver can't process correctly. This driver needs to divide the data
into 4Kbyte unit.
This patch fixes the issue.

Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
9 years agospi-topcliff-pch: Modify pci-bus number dynamically to get DMA device info
Tomoya MORINAGA [Fri, 9 Dec 2011 04:11:42 +0000 (13:11 +0900)]
spi-topcliff-pch: Modify pci-bus number dynamically to get DMA device info

Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
9 years agospi/imx: simplify error handling to free gpios
Axel Lin [Tue, 10 Jan 2012 07:27:36 +0000 (15:27 +0800)]
spi/imx: simplify error handling to free gpios

Simplify the error handling by moving the code to free gpios in one place.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
9 years agospi: Convert to DEFINE_PCI_DEVICE_TABLE
Axel Lin [Thu, 15 Dec 2011 00:11:25 +0000 (08:11 +0800)]
spi: Convert to DEFINE_PCI_DEVICE_TABLE

Convert static struct pci_device_id *[] to static DEFINE_PCI_DEVICE_TABLE
tables.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
9 years agospi: add Broadcom BCM63xx SPI controller driver
Florian Fainelli [Wed, 1 Feb 2012 10:14:09 +0000 (11:14 +0100)]
spi: add Broadcom BCM63xx SPI controller driver

This patch adds support for the SPI controller found on the Broadcom BCM63xx
SoCs.

Signed-off-by: Tanguy Bouzeloc <tanguy.bouzeloc@efixo.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
9 years agoSPI: add CSR SiRFprimaII SPI controller driver
Zhiwu Song [Mon, 13 Feb 2012 09:45:38 +0000 (17:45 +0800)]
SPI: add CSR SiRFprimaII SPI controller driver

CSR SiRFprimaII has two SPIs (SPI0 and SPI1). Features:
* Master and slave modes
* 8-/12-/16-/32-bit data unit
* 256 bytes receive data FIFO and 256 bytes transmit data FIFO
* Multi-unit frame
* Configurable SPI_EN (chip select pin) active state
* Configurable SPI_CLK polarity
* Configurable SPI_CLK phase
* Configurable MSB/LSB first

Signed-off-by: Zhiwu Song <zhiwu.song@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
9 years agospi-topcliff-pch: fix -Wuninitialized warning
Danny Kukawka [Tue, 14 Feb 2012 14:35:03 +0000 (15:35 +0100)]
spi-topcliff-pch: fix -Wuninitialized warning

Fix for:
drivers/spi/spi-topcliff-pch.c: In function ‘pch_spi_handler_sub’:
drivers/spi/spi-topcliff-pch.c:325:17: warning: ‘bpw_len’ may be
  used uninitialized in this function [-Wuninitialized]
drivers/spi/spi-topcliff-pch.c:325:42: warning: ‘rx_index’ may be
  used uninitialized in this function [-Wuninitialized]
drivers/spi/spi-topcliff-pch.c:325:42: warning: ‘tx_index’ may be
  used uninitialized in this function [-Wuninitialized]

Move usage of tx_index, rx_index and bpw_len into the same
block as where they are set to prevent uninitialized usage.

v2: instead of init variables with 0 move the whole block

Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
9 years agospi: Mark spi_register_board_info() __devinit
Mark Brown [Sat, 18 Feb 2012 00:23:29 +0000 (16:23 -0800)]
spi: Mark spi_register_board_info() __devinit

Some systems have SPI devices located on plugin modules which are
enumerated at runtime as devices. The drivers for these plugin modules
need to register their SPI devices at probe() time so want to be able
to call spi_register_board_info() but that function is currently marked
as __init rather than __devinit so this usage isn't legal. Change the
annotation to __devinit to handle this.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
9 years agospi/s3c64xx: Convert to using core message queue
Mark Brown [Wed, 15 Feb 2012 22:48:32 +0000 (14:48 -0800)]
spi/s3c64xx: Convert to using core message queue

Convert the s3c64xx driver to using the new message queue factored out of
the pl022 driver by Linus Walleij, saving us a nice block of code and
getting the benefits of improvements implemented in the core.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
9 years agospi: controller drivers don't need to depend on SPI_MASTER explicitly
Uwe Kleine-König [Thu, 23 Feb 2012 09:37:55 +0000 (10:37 +0100)]
spi: controller drivers don't need to depend on SPI_MASTER explicitly

They are all defined in an if SPI_MASTER ... endif block.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
9 years agospi/doc: spi_master_put must be followed up by kfree
Uwe Kleine-König [Thu, 23 Feb 2012 09:40:14 +0000 (10:40 +0100)]
spi/doc: spi_master_put must be followed up by kfree

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
9 years agospi: Trivial warning fix
Shubhrajyoti D [Mon, 27 Feb 2012 13:59:05 +0000 (19:29 +0530)]
spi: Trivial warning fix

The loop count i traverses for ntrans which is unsigned
so make the loop count i also unsigned.

Fix the below warning
In file included from drivers/spi/spi-omap2-mcspi.c:38:
include/linux/spi/spi.h: In function 'spi_message_alloc':
include/linux/spi/spi.h:556: warning: comparison between signed and unsigned integer expressions

Cc: Vitaly Wool <vwool@ru.mvista.com>
Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
9 years agospi: Add SuperH HSPI prototype driver
Kuninori Morimoto [Fri, 2 Mar 2012 01:10:17 +0000 (17:10 -0800)]
spi: Add SuperH HSPI prototype driver

This patch adds SuperH HSPI driver.
It is still prototype driver, but has enough function at this point.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
9 years agospi: create a message queueing infrastructure
Linus Walleij [Wed, 22 Feb 2012 09:05:38 +0000 (10:05 +0100)]
spi: create a message queueing infrastructure

This rips the message queue in the PL022 driver out and pushes
it into (optional) common infrastructure. Drivers that want to
use the message pumping thread will need to define the new
per-messags transfer methods and leave the deprecated transfer()
method as NULL.

Most of the design is described in the documentation changes that
are included in this patch.

Since there is a queue that need to be stopped when the system
is suspending/resuming, two new calls are implemented for the
device drivers to call in their suspend()/resume() functions:
spi_master_suspend() and spi_master_resume().

ChangeLog v1->v2:
- Remove Kconfig entry and do not make the queue support optional
  at all, instead be more agressive and have it as part of the
  compulsory infrastructure.
- If the .transfer() method is implemented, delete print a small
  deprecation notice and do not start the transfer pump.
- Fix a bitrotted comment.
ChangeLog v2->v3:
- Fix up a problematic sequence courtesy of Chris Blair.
- Stop rather than destroy the queue on suspend() courtesy of
  Chris Blair.

Signed-off-by: Chris Blair <chris.blair@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
9 years agospi: add support for Renesas RSPI
Shimoda, Yoshihiro [Wed, 7 Mar 2012 05:46:25 +0000 (14:46 +0900)]
spi: add support for Renesas RSPI

The SH7757 has RSPI module. This patch supports it.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
9 years agospi/spi-sh: add IORESOURCE_MEM_TYPE_MASK decoding for access size
Shimoda, Yoshihiro [Wed, 7 Mar 2012 05:45:37 +0000 (14:45 +0900)]
spi/spi-sh: add IORESOURCE_MEM_TYPE_MASK decoding for access size

This SPI controller's access size is 32, or 8-bit. The previous driver
supported 32-bit only. So, this patch adds IORESOURCE_MEM_TYPE_MASK
decoding, an then, the driver can handle the SPI controller of 8-bit.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
9 years agospi/omap: Add DT support to McSPI driver
Benoit Cousson [Wed, 15 Feb 2012 17:37:34 +0000 (18:37 +0100)]
spi/omap: Add DT support to McSPI driver

Add device tree support to the OMAP2+ McSPI driver.
Add the bindings documentation.

Based on original code from Rajendra.

Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
9 years agospi/pl022: Add high priority message pump support
Chris Blair [Thu, 2 Feb 2012 12:59:34 +0000 (13:59 +0100)]
spi/pl022: Add high priority message pump support

This switches the PL022 worker to a kthread in order to get
hold of a mechanism to control the message pump priority. On
low-latency systems elevating the message kthread to realtime
priority give a real sleek response curve. This has been
confirmed by measurements. Realtime priority elevation for
a certain PL022 port can be requested from platform data.

Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Chris Blair <chris.blair@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
9 years agospi/nuc900: Remove unnecessary memset of struct nuc900_spi
Tobias Klauser [Wed, 1 Feb 2012 12:33:42 +0000 (13:33 +0100)]
spi/nuc900: Remove unnecessary memset of struct nuc900_spi

The memory allocated using kzalloc by spi_alloc_master so it doesn't
need to be set to 0 again.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
9 years agoMerge branch 'spi/s3c64xx' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie...
Grant Likely [Mon, 30 Jan 2012 15:32:37 +0000 (08:32 -0700)]
Merge branch 'spi/s3c64xx' of git://git./linux/kernel/git/broonie/misc

Conflicts:
drivers/spi/spi-s3c64xx.c

9 years agospi/s3c64xx: Implement runtime PM support
Mark Brown [Sun, 4 Dec 2011 00:58:06 +0000 (00:58 +0000)]
spi/s3c64xx: Implement runtime PM support

Enable and disable the clocks to the SPI controller using runtime PM. This
serves the dual purpose of reducing power consumption a little and letting
the core know when the device is idle.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
9 years agospi/s3c64xx: Convert to dev_pm_ops
Mark Brown [Sun, 4 Dec 2011 00:36:18 +0000 (00:36 +0000)]
spi/s3c64xx: Convert to dev_pm_ops

In preparation for the addition of runtime PM ops.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
9 years agospi/s3c64xx: Log error interrupts
Mark Brown [Thu, 10 Nov 2011 10:57:32 +0000 (10:57 +0000)]
spi/s3c64xx: Log error interrupts

Although the hardware supports interrupts we're not currently using them
at all since for small transfers the overhead is greater than that for
busy waiting and for large transfers we have interrupts from the DMA.
This means that if the hardware reports an error (especially one which
might not stall transfer) we might miss it.

Take a first pass at dealing with such errors by enabling the interrupt
if we can and logging the errors if they happen. Ideally we'd report the
error via the affected transfer but since we're in master mode it's very
difficult to trigger errors at present and this code is much simpler.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
9 years agoLinux 3.3-rc1
Linus Torvalds [Thu, 19 Jan 2012 23:04:48 +0000 (15:04 -0800)]
Linux 3.3-rc1

9 years agoMerge branches 'sched-urgent-for-linus', 'perf-urgent-for-linus' and 'x86-urgent...
Linus Torvalds [Thu, 19 Jan 2012 22:53:06 +0000 (14:53 -0800)]
Merge branches 'sched-urgent-for-linus', 'perf-urgent-for-linus' and 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/accounting, proc: Fix /proc/stat interrupts sum

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tracepoints/module: Fix disabling tracepoints with taint CRAP or OOT
  x86/kprobes: Add arch/x86/tools/insn_sanity to .gitignore
  x86/kprobes: Fix typo transferred from Intel manual

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, syscall: Need __ARCH_WANT_SYS_IPC for 32 bits
  x86, tsc: Fix SMI induced variation in quick_pit_calibrate()
  x86, opcode: ANDN and Group 17 in x86-opcode-map.txt
  x86/kconfig: Move the ZONE_DMA entry under a menu
  x86/UV2: Add accounting for BAU strong nacks
  x86/UV2: Ack BAU interrupt earlier
  x86/UV2: Remove stale no-resources test for UV2 BAU
  x86/UV2: Work around BAU bug
  x86/UV2: Fix BAU destination timeout initialization
  x86/UV2: Fix new UV2 hardware by using native UV2 broadcast mode
  x86: Get rid of dubious one-bit signed bitfield

9 years agoMerge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6
Linus Torvalds [Thu, 19 Jan 2012 22:52:03 +0000 (14:52 -0800)]
Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6

gpio bug fixes for v3.3

* tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6:
  gpio: tps65910: Use correct offset for gpio initialization
  gpio/it8761e: Restrict it8761e gpio driver to x86.
  gpio-ml-ioh: cleanup __iomem annotation usage
  gpio-ml-ioh: cleanup NULL pointer checking
  gpio-pch: cleanup __iomem annotation usage
  gpio-pch: cleanup NULL pointer checking

9 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Linus Torvalds [Thu, 19 Jan 2012 22:49:16 +0000 (14:49 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  qnx4: don't leak ->BitMap on late failure exits
  qnx4: reduce the insane nesting in qnx4_checkroot()
  qnx4: di_fname is an array, for crying out loud...
  vfs: remove printk from set_nlink()
  wake up s_wait_unfrozen when ->freeze_fs fails

9 years agox86, syscall: Need __ARCH_WANT_SYS_IPC for 32 bits
H. Peter Anvin [Thu, 19 Jan 2012 20:41:25 +0000 (12:41 -0800)]
x86, syscall: Need __ARCH_WANT_SYS_IPC for 32 bits

In checkin

  303395ac3bf3 x86: Generate system call tables and unistd_*.h from tables

the feature macros in <asm/unistd.h> were unified between 32 and 64
bits.  Unfortunately 32 bits requires __ARCH_WANT_SYS_IPC and this was
inadvertently dropped.

Reported-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Link: http://lkml.kernel.org/r/CALLzPKbeXN5gdngo8uYYU8mAow=XhrwBFBhKfG811f37BubQOg@mail.gmail.com
9 years agoMerge remote-tracking branch 'linus/master' into x86/urgent
H. Peter Anvin [Thu, 19 Jan 2012 20:56:50 +0000 (12:56 -0800)]
Merge remote-tracking branch 'linus/master' into x86/urgent

9 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris...
Linus Torvalds [Thu, 19 Jan 2012 19:46:08 +0000 (11:46 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/linux-security

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  KEYS: Permit key_serial() to be called with a const key pointer
  keys: fix user_defined key sparse messages
  ima: fix cred sparse warning
  MPILIB: Add a missing ENOMEM check

9 years agoqnx4: don't leak ->BitMap on late failure exits
Al Viro [Thu, 19 Jan 2012 18:54:36 +0000 (13:54 -0500)]
qnx4: don't leak ->BitMap on late failure exits

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
9 years agoqnx4: reduce the insane nesting in qnx4_checkroot()
Al Viro [Thu, 19 Jan 2012 18:40:57 +0000 (13:40 -0500)]
qnx4: reduce the insane nesting in qnx4_checkroot()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
9 years agoqnx4: di_fname is an array, for crying out loud...
Al Viro [Thu, 19 Jan 2012 18:19:42 +0000 (13:19 -0500)]
qnx4: di_fname is an array, for crying out loud...

(struct qnx4_inode_entry *)(bh->b_data + some_offset)->di_fname
is not going to be NULL, TYVM...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
9 years agoKEYS: Permit key_serial() to be called with a const key pointer
David Howells [Wed, 18 Jan 2012 10:04:29 +0000 (10:04 +0000)]
KEYS: Permit key_serial() to be called with a const key pointer

Permit key_serial() to be called with a const key pointer.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
9 years agokeys: fix user_defined key sparse messages
Mimi Zohar [Wed, 18 Jan 2012 10:03:14 +0000 (10:03 +0000)]
keys: fix user_defined key sparse messages

Replace the rcu_assign_pointer() calls with rcu_assign_keypointer().

Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
9 years agoima: fix cred sparse warning
Mimi Zohar [Wed, 18 Jan 2012 03:11:28 +0000 (22:11 -0500)]
ima: fix cred sparse warning

Fix ima_policy.c sparse "warning: dereference of noderef expression"
message, by accessing cred->uid using current_cred().

Changelog v1:
- Change __cred to just cred (based on David Howell's comment)

Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
9 years agouml: fix compile for x86-64
Linus Torvalds [Thu, 19 Jan 2012 03:26:11 +0000 (19:26 -0800)]
uml: fix compile for x86-64

Randy Dunlap reports that we get

  arch/x86/um/shared/sysdep/ptrace.h:7:20: error: redefinition of 'regs_return_value'
  arch/x86/um/shared/sysdep/ptrace.h:7:20: note: previous definition of 'regs_return_value' was here

when compiling UML for x86-64.

Stephen Rothwell root-caused it and says:

 "Caused by commit d7e7528bcd45 ("Audit: push audit success and retcode
  into arch ptrace.h") (another patch that was never in linux-next :-().

  This file now needs protection against double inclusion."

so let's do as the man says.

Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Analyzed-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agoMPILIB: Add a missing ENOMEM check
David Howells [Wed, 18 Jan 2012 10:03:54 +0000 (10:03 +0000)]
MPILIB: Add a missing ENOMEM check

Add a missing ENOMEM check.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
9 years agoMerge branch 'for-next-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/nab...
Linus Torvalds [Thu, 19 Jan 2012 00:29:42 +0000 (16:29 -0800)]
Merge branch 'for-next-merge' of git://git./linux/kernel/git/nab/target-pending

* 'for-next-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  ib_srpt: Initial SRP Target merge for v3.3-rc1

9 years agoMerge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target...
Linus Torvalds [Wed, 18 Jan 2012 23:59:18 +0000 (15:59 -0800)]
Merge branch 'for-next' of git://git./linux/kernel/git/nab/target-pending

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (26 commits)
  target: Set additional sense length field in sense data
  target: Remove legacy device status check from transport_execute_tasks
  target: Remove __transport_execute_tasks() for each processing context
  target: Remove extra se_device->execute_task_lock access in fast path
  target: Drop se_device TCQ queue_depth usage from I/O path
  target: Fix possible NULL pointer with __transport_execute_tasks
  target: Remove TFO->check_release_cmd() fabric API caller
  tcm_fc: Convert ft_send_work to use target_submit_cmd
  target: Add target_submit_cmd() for process context fabric submission
  target: Make target_put_sess_cmd use target_release_cmd_kref
  target: Set response format in INQUIRY response
  target: tcm_mod_builder: small fixups
  Documentation/target: Fix tcm_mod_builder.py build breakage
  target: remove overagressive ____cacheline_aligned annoations
  tcm_loop: bump max_sectors
  target/configs: remove trailing newline from udev_path and alias
  iscsi-target: fix chap identifier simple_strtoul usage
  target: remove useless casts
  target: simplify target_check_cdb_and_preempt
  target: Move core_scsi3_check_cdb_abort_and_preempt
  ...

9 years agoMerge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Linus Torvalds [Wed, 18 Jan 2012 23:51:48 +0000 (15:51 -0800)]
Merge branch 'release' of git://git./linux/kernel/git/lenb/linux

This includes initial support for the recently published ACPI 5.0 spec.
In particular, support for the "hardware-reduced" bit that eliminates
the dependency on legacy hardware.

APEI has patches resulting from testing on real hardware.

Plus other random fixes.

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (52 commits)
  acpi/apei/einj: Add extensions to EINJ from rev 5.0 of acpi spec
  intel_idle: Split up and provide per CPU initialization func
  ACPI processor: Remove unneeded variable passed by acpi_processor_hotadd_init V2
  ACPI processor: Remove unneeded cpuidle_unregister_driver call
  intel idle: Make idle driver more robust
  intel_idle: Fix a cast to pointer from integer of different size warning in intel_idle
  ACPI: kernel-parameters.txt : Add intel_idle.max_cstate
  intel_idle: remove redundant local_irq_disable() call
  ACPI processor: Fix error path, also remove sysdev link
  ACPI: processor: fix acpi_get_cpuid for UP processor
  intel_idle: fix API misuse
  ACPI APEI: Convert atomicio routines
  ACPI: Export interfaces for ioremapping/iounmapping ACPI registers
  ACPI: Fix possible alignment issues with GAS 'address' references
  ACPI, ia64: Use SRAT table rev to use 8bit or 16/32bit PXM fields (ia64)
  ACPI, x86: Use SRAT table rev to use 8bit or 32bit PXM fields (x86/x86-64)
  ACPI: Store SRAT table revision
  ACPI, APEI, Resolve false conflict between ACPI NVS and APEI
  ACPI, Record ACPI NVS regions
  ACPI, APEI, EINJ, Refine the fix of resource conflict
  ...

9 years agotpm: fix (ACPI S3) suspend regression
Stefan Berger [Wed, 18 Jan 2012 03:07:30 +0000 (22:07 -0500)]
tpm: fix (ACPI S3) suspend regression

This patch fixes an (ACPI S3) suspend regression introduced in commit
68d6e6713fcb ("tpm: Introduce function to poll for result of self test")
and occurring with an Infineon TPM and tpm_tis and tpm_infineon drivers
active.

The suspend problem occurred if the TPM was disabled and/or deactivated
and therefore the TPM_PCRRead checking the result of the (asynchronous)
self test returned an error code which then caused the tpm_tis driver to
become inactive and this then seemed to have negatively influenced the
suspend support by the tpm_infineon driver...  Besides that the tpm_tis
drive may stay active even if the TPM is disabled and/or deactivated.

Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Tested-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agonvme: fix merge error due to change of 'make_request_fn' fn type
Linus Torvalds [Wed, 18 Jan 2012 23:41:27 +0000 (15:41 -0800)]
nvme: fix merge error due to change of 'make_request_fn' fn type

The type of 'make_request_fn' changed in 5a7bbad27a4 ("block: remove
support for bio remapping from ->make_request"), but the merge of the
nvme driver didn't take that into account, and as a result the driver
would compile with a warning:

  drivers/block/nvme.c: In function 'nvme_alloc_ns':
  drivers/block/nvme.c:1336:2: warning: passing argument 2 of 'blk_queue_make_request' from incompatible pointer type [enabled by default]
  include/linux/blkdev.h:830:13: note: expected 'void (*)(struct request_queue *, struct bio *)' but argument is of type 'int (*)(struct request_queue *, struct bio *)'

It's benign, but the warning is annoying.

Reported-by: Stephen Rothwell <sfr@canb.auug.org>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agoxen: using EXPORT_SYMBOL requires including export.h
Stephen Rothwell [Wed, 18 Jan 2012 23:24:31 +0000 (10:24 +1100)]
xen: using EXPORT_SYMBOL requires including export.h

Fix these warnings:

  drivers/xen/biomerge.c:14:1: warning: data definition has no type or storage class [enabled by default]
  drivers/xen/biomerge.c:14:1: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL' [-Wimplicit-int]
  drivers/xen/biomerge.c:14:1: warning: parameter names (without types) in function declaration [enabled by default]

And this build error:

  ERROR: "xen_biovec_phys_mergeable" [drivers/block/nvme.ko] undefined!

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agoMerge branch 'for-linus/i2c-33' of git://git.fluff.org/bjdooks/linux
Linus Torvalds [Wed, 18 Jan 2012 21:46:13 +0000 (13:46 -0800)]
Merge branch 'for-linus/i2c-33' of git://git.fluff.org/bjdooks/linux

* 'for-linus/i2c-33' of git://git.fluff.org/bjdooks/linux:
  i2c-eg20t: Change-company-name-OKI-SEMICONDUCTOR to LAPIS Semiconductor
  i2c-eg20t: Support new device LAPIS Semiconductor ML7831 IOH
  i2c-eg20t: modified the setting of transfer rate.
  i2c-eg20t: use i2c_add_numbered_adapter to get a fixed bus number
  i2c: OMAP: Add DT support for i2c controller
  I2C: OMAP: NACK without STP
  I2C: OMAP: correct SYSC register offset for OMAP4

9 years agoMerge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab...
Linus Torvalds [Wed, 18 Jan 2012 20:53:54 +0000 (12:53 -0800)]
Merge branch 'v4l_for_linus' of git://git./linux/kernel/git/mchehab/linux-media

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (57 commits)
  [media] as3645a: Fix compilation by including slab.h
  [media] s5p-fimc: Remove linux/version.h include from fimc-mdevice.c
  [media] s5p-mfc: Remove linux/version.h include from s5p_mfc.c
  [media] ds3000: using logical && instead of bitwise &
  [media] v4l2-ctrls: make control names consistent
  [media] DVB: dib0700, add support for Nova-TD LEDs
  [media] DVB: dib0700, add corrected Nova-TD frontend_attach
  [media] DVB: dib0700, separate stk7070pd initialization
  [media] DVB: dib0700, move Nova-TD Stick to a separate set
  [media] : add MODULE_FIRMWARE to dib0700
  [media] DVB-CORE: remove superfluous DTV_CMDs
  [media] s5p-jpeg: adapt to recent videobuf2 changes
  [media] s5p-g2d: fixed a bug in controls setting function
  [media] s5p-mfc: Fix volatile controls setup
  [media] drivers/media/video/s5p-mfc/s5p_mfc.c: adjust double test
  [media] drivers/media/video/s5p-fimc/fimc-capture.c: adjust double test
  [media] s5p-fimc: Fix incorrect control ID assignment
  [media] dvb_frontend: Don't call get_frontend() if idle
  [media] DocBook/dvbproperty.xml: Remove DTV_MODULATION from ISDB-T
  [media] DocBook/dvbproperty.xml: Fix ISDB-T delivery system parameters
  ...

9 years agoMerge branch 'fix/asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Linus Torvalds [Wed, 18 Jan 2012 20:53:36 +0000 (12:53 -0800)]
Merge branch 'fix/asoc' of git://git./linux/kernel/git/tiwai/sound

* 'fix/asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ASoC: Wait for WM8993 FLL to stabilise
  ASoC: core - Free platform DAPM context at platform removal.
  ASoC: dapm - Fix check for codec context in dapm_power_widgets().
  ASoC: sgtl5000: update author email address
  ASoC: Fix DMA channel leak in imx-pcm-dma-mx2 driver.

9 years agogpio: tps65910: Use correct offset for gpio initialization
Laxman Dewangan [Wed, 18 Jan 2012 14:37:35 +0000 (20:07 +0530)]
gpio: tps65910: Use correct offset for gpio initialization

Using the correct gpio offset for setting the initial value
of gpio when setting output direction.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
9 years agoMerge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi...
Linus Torvalds [Wed, 18 Jan 2012 20:35:17 +0000 (12:35 -0800)]
Merge tag 'scsi-misc' of git://git./linux/kernel/git/jejb/scsi-misc-2.6

SCSI updates on 20120118

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (49 commits)
  [SCSI] libfc: remove redundant timer init for fcp
  [SCSI] fcoe: Move fcoe_debug_logging from fcoe.h to fcoe.c
  [SCSI] libfc: Declare local functions static
  [SCSI] fcoe: fix regression on offload em matching function for initiator/target
  [SCSI] qla4xxx: Update driver version to 5.02.00-k12
  [SCSI] qla4xxx: Cleanup modinfo display
  [SCSI] qla4xxx: Update license
  [SCSI] qla4xxx: Clear the RISC interrupt bit during FW init
  [SCSI] qla4xxx: Added error logging for firmware abort
  [SCSI] qla4xxx: Disable generating pause frames in case of FW hung
  [SCSI] qla4xxx: Temperature monitoring for ISP82XX core.
  [SCSI] megaraid: fix sparse warnings
  [SCSI] sg: convert to kstrtoul_from_user()
  [SCSI] don't change sdev starvation list order without request dispatched
  [SCSI] isci: fix, prevent port from getting stuck in the 'configuring' state
  [SCSI] isci: fix start OOB
  [SCSI] isci: fix io failures while wide port links are coming up
  [SCSI] isci: allow more time for wide port targets
  [SCSI] isci: enable wide port targets
  [SCSI] isci: Fix IO fails when pull cable from phy in x4 wideport in MPC mode.
  ...

9 years agoMerge git://git.infradead.org/users/willy/linux-nvme
Linus Torvalds [Wed, 18 Jan 2012 20:34:09 +0000 (12:34 -0800)]
Merge git://git.infradead.org/users/willy/linux-nvme

* git://git.infradead.org/users/willy/linux-nvme: (105 commits)
  NVMe: Set number of queues correctly
  NVMe: Version 0.8
  NVMe: Set queue flags correctly
  NVMe: Simplify nvme_unmap_user_pages
  NVMe: Mark the end of the sg list
  NVMe: Fix DMA mapping for admin commands
  NVMe: Rename IO_TIMEOUT to NVME_IO_TIMEOUT
  NVMe: Merge the nvme_bio and nvme_prp data structures
  NVMe: Change nvme_completion_fn to take a dev
  NVMe: Change get_nvmeq to take a dev instead of a namespace
  NVMe: Simplify completion handling
  NVMe: Update Identify Controller data structure
  NVMe: Implement doorbell stride capability
  NVMe: Version 0.7
  NVMe: Don't probe namespace 0
  Fix calculation of number of pages in a PRP List
  NVMe: Create nvme_identify and nvme_get_features functions
  NVMe: Fix memory leak in nvme_dev_add()
  NVMe: Fix calls to dma_unmap_sg
  NVMe: Correct sg list setup in nvme_map_user_pages
  ...

9 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Linus Torvalds [Wed, 18 Jan 2012 06:26:41 +0000 (22:26 -0800)]
Merge git://git./linux/kernel/git/davem/net

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (47 commits)
  tg3: Fix single-vector MSI-X code
  openvswitch: Fix multipart datapath dumps.
  ipv6: fix per device IP snmp counters
  inetpeer: initialize ->redirect_genid in inet_getpeer()
  net: fix NULL-deref in WARN() in skb_gso_segment()
  net: WARN if skb_checksum_help() is called on skb requiring segmentation
  caif: Remove bad WARN_ON in caif_dev
  caif: Fix typo in Vendor/Product-ID for CAIF modems
  bnx2x: Disable AN KR work-around for BCM57810
  bnx2x: Remove AutoGrEEEn for BCM84833
  bnx2x: Remove 100Mb force speed for BCM84833
  bnx2x: Fix PFC setting on BCM57840
  bnx2x: Fix Super-Isolate mode for BCM84833
  net: fix some sparse errors
  net: kill duplicate included header
  net: sh-eth: Fix build error by the value which is not defined
  net: Use device model to get driver name in skb_gso_segment()
  bridge: BH already disabled in br_fdb_cleanup()
  net: move sock_update_memcg outside of CONFIG_INET
  mwl8k: Fixing Sparse ENDIAN CHECK warning
  ...

9 years agoMerge branches 'einj', 'intel_idle', 'misc', 'srat' and 'turbostat-ivb' into release
Len Brown [Wed, 18 Jan 2012 06:15:54 +0000 (01:15 -0500)]
Merge branches 'einj', 'intel_idle', 'misc', 'srat' and 'turbostat-ivb' into release

9 years agoacpi/apei/einj: Add extensions to EINJ from rev 5.0 of acpi spec
Tony Luck [Tue, 17 Jan 2012 20:10:16 +0000 (12:10 -0800)]
acpi/apei/einj: Add extensions to EINJ from rev 5.0 of acpi spec

ACPI 5.0 provides extensions to the EINJ mechanism to specify the
target for the error injection - by APICID for cpu related errors,
by address for memory related errors, and by segment/bus/device/function
for PCIe related errors. Also extensions for vendor specific error
injections.

Tested-by: Chen Gong <gong.chen@linux.intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
9 years agoMerge branch 'atomicio-remove' into release
Len Brown [Wed, 18 Jan 2012 05:46:30 +0000 (00:46 -0500)]
Merge branch 'atomicio-remove' into release

9 years agoMerge branch 'apei' into release
Len Brown [Wed, 18 Jan 2012 05:18:10 +0000 (00:18 -0500)]
Merge branch 'apei' into release

9 years agointel_idle: Split up and provide per CPU initialization func
Thomas Renninger [Tue, 17 Jan 2012 21:40:08 +0000 (22:40 +0100)]
intel_idle: Split up and provide per CPU initialization func

Function split up, should have no functional change.

Provides entry point for physically hotplugged CPUs
to initialize and activate cpuidle.

Signed-off-by: Thomas Renninger <trenn@suse.de>
CC: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>
CC: Shaohua Li <shaohua.li@intel.com>
CC: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
9 years agoACPI processor: Remove unneeded variable passed by acpi_processor_hotadd_init V2
Thomas Renninger [Tue, 17 Jan 2012 21:40:07 +0000 (22:40 +0100)]
ACPI processor: Remove unneeded variable passed by acpi_processor_hotadd_init V2

V2: Fix typo: pr->handle -> pr, here: acpi_processor_hotadd_init(pr)

This is a very small part taken from patches which afaik
are coming from Yunhong Jiang (for a Xen not a Linus repo?).

Cleanup only: no functional change.

Advantage (beside cleanup) is that other data of the pr (acpi_processor) struct
in the acpi_processor_hotadd_init() is needed later, for example a newly
introduced flag:
pr->flags.need_hotplug_init

Signed-off-by: Thomas Renninger <trenn@suse.de>
CC: Bjorn Helgaas <bhelgaas@google.com>
CC: Jiang, Yunhong <yunhong.jiang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
9 years agotg3: Fix single-vector MSI-X code
Matt Carlson [Tue, 17 Jan 2012 15:27:23 +0000 (15:27 +0000)]
tg3: Fix single-vector MSI-X code

Kdump kernels leave MSI-X interrupts (as setup by the crashed kernel)
enabled.  However, kdump only enables one CPU in the new environment,
thus causing tg3 to abort MSI-X setup.  When the driver attempts to
enable INTA or MSI interrupt modes on a kdump kernel, interrupt
delivery fails.

This patch attempts to workaround the problem by forcing the driver
to enable a single MSI-X interrupt.  In such a configuration, the
device's multivector interrupt mode must be disabled.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoopenvswitch: Fix multipart datapath dumps.
Ben Pfaff [Tue, 17 Jan 2012 13:33:39 +0000 (13:33 +0000)]
openvswitch: Fix multipart datapath dumps.

The logic to split up the list of datapaths into multiple Netlink messages
was simply wrong, causing the list to be terminated after the first part.
Only about the first 50 datapaths would be dumped.  This fixes the
problem.

Reported-by: Paul Ingram <paul@nicira.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoipv6: fix per device IP snmp counters
Eric Dumazet [Tue, 17 Jan 2012 12:45:36 +0000 (12:45 +0000)]
ipv6: fix per device IP snmp counters

In commit 4ce3c183fca (snmp: 64bit ipstats_mib for all arches), I forgot
to change the /proc/net/dev_snmp6/xxx output for IP counters.

percpu array is 64bit per counter but the folding still used the 'long'
variant, and output garbage on 32bit arches.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoMerge tag 'arm-soc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Linus Torvalds [Wed, 18 Jan 2012 02:55:56 +0000 (18:55 -0800)]
Merge tag 'arm-soc-fixes' of git://git./linux/kernel/git/arm/arm-soc

ARM: fixes for ARM platforms

Some fallout from the 3.3. merge window as well as a couple bug fixes
for older preexisting bugs that seem valid to include at this time:

* sched_clock changes broke picoxcell, fix included
* BSYM bugs causing issues with thumb2-built kernels on SMP
* Missing module.h include on msm.
* A collection of bugfixes for samsung platforms that didn't make it into
  the first pull requests.

* tag 'arm-soc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: make BSYM macro assembly only
  ARM: highbank: remove incorrect BSYM usage
  ARM: imx: remove incorrect BSYM usage
  ARM: exynos: remove incorrect BSYM usage
  ARM: ux500: add missing ENDPROC to headsmp.S
  ARM: msm: Add missing ENDPROC to headsmp.S
  ARM: versatile: Add missing ENDPROC to headsmp.S
  ARM: EXYNOS: Invert VCLK polarity for framebuffer on ORIGEN
  ARM: S3C64XX: Fix interrupt configuration for PCA935x on Cragganmore
  ARM: S3C64XX: Fix the memory mapped GPIOs on Cragganmore
  ARM: S3C64XX: Remove hsmmc1 from Cragganmore
  ARM: S3C64XX: Remove unconditional power domain disables
  ARM: SAMSUNG: Declare struct platform_device in plat/s3c64xx-spi.h
  ARM: SAMSUNG: dma-ops.h needs mach/dma.h
  ARM: SAMSUNG: Guard against multiple inclusion of plat/dma.h
  ARM: picoxcell: fix sched_clock() cleanup fallout
  ARM: msm: vreg is a module and so needs module.h

9 years agoMerge branch 'next' of git://git.infradead.org/users/vkoul/slave-dma
Linus Torvalds [Wed, 18 Jan 2012 02:40:24 +0000 (18:40 -0800)]
Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dma

* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (53 commits)
  ARM: mach-shmobile: specify CHCLR registers on SH7372
  dma: shdma: fix runtime PM: clear channel buffers on reset
  dma/imx-sdma: save irq flags when use spin_lock in sdma_tx_submit
  dmaengine/ste_dma40: clear LNK on channel startup
  dmaengine: intel_mid_dma: remove legacy pm interface
  ASoC: mxs: correct 'direction' of device_prep_dma_cyclic
  dmaengine: intel_mid_dma: error path fix
  dmaengine: intel_mid_dma: locking and freeing fixes
  mtd: gpmi-nand: move to dma_transfer_direction
  mtd: fix compile error for gpmi-nand
  mmc: mxs-mmc: fix the dma_transfer_direction migration
  dmaengine: add DMA_TRANS_NONE to dma_transfer_direction
  dma: mxs-dma: Don't use CLKGATE bits in CTRL0 to disable DMA channels
  dma: mxs-dma: make mxs_dma_prep_slave_sg() multi user safe
  dma: mxs-dma: Always leave mxs_dma_init() with the clock disabled.
  dma: mxs-dma: fix a typo in comment
  DMA: PL330: Remove pm_runtime_xxx calls from pl330 probe/remove
  video i.MX IPU: Fix display connections
  i.MX IPU DMA: Fix wrong burstsize settings
  dmaengine/ste_dma40: allow fixed physical channel
  ...

Fix up conflicts in drivers/dma/{Kconfig,mxs-dma.c,pl330.c}

The conflicts looked pretty trivial, but I'll ask people to verify them.

9 years agoMerge branch 'upstream-linus' of git://github.com/jgarzik/libata-dev
Linus Torvalds [Wed, 18 Jan 2012 02:11:38 +0000 (18:11 -0800)]
Merge branch 'upstream-linus' of git://github.com/jgarzik/libata-dev

* 'upstream-linus' of git://github.com/jgarzik/libata-dev:
  [libata] ata_piix: Add Toshiba Satellite Pro A120 to the quirks list due to broken suspend functionality.
  [libata] add DVRTD08A and DVR-215 to NOSETXFER device quirk list
  [libata] pata_bf54x: Support sg list in bmdma transfer.
  [libata] sata_fsl: fix the controller operating mode
  [libata] enable ata port async suspend

9 years agox86-32: Fix build failure with AUDIT=y, AUDITSYSCALL=n
Al Viro [Wed, 18 Jan 2012 01:51:22 +0000 (01:51 +0000)]
x86-32: Fix build failure with AUDIT=y, AUDITSYSCALL=n

JONGMAN HEO reports:

  With current linus git (commit a25a2b84), I got following build error,

  arch/x86/kernel/vm86_32.c: In function 'do_sys_vm86':
  arch/x86/kernel/vm86_32.c:340: error: implicit declaration of function '__audit_syscall_exit'
  make[3]: *** [arch/x86/kernel/vm86_32.o] Error 1

OK, I can reproduce it (32bit allmodconfig with AUDIT=y, AUDITSYSCALL=n)

It's due to commit d7e7528bcd45: "Audit: push audit success and retcode
into arch ptrace.h".

Reported-by: JONGMAN HEO <jongman.heo@samsung.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years ago[libata] ata_piix: Add Toshiba Satellite Pro A120 to the quirks list
Benjamin Larsson [Sat, 7 Jan 2012 23:39:10 +0000 (00:39 +0100)]
[libata] ata_piix: Add Toshiba Satellite Pro A120 to the quirks list
due to broken suspend functionality.

Signed-off-by: Benjamin Larsson <benjamin@southpole.se>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
9 years ago[libata] add DVRTD08A and DVR-215 to NOSETXFER device quirk list
Vladimir LAVALLADE [Sun, 8 Jan 2012 12:50:13 +0000 (13:50 +0100)]
[libata] add DVRTD08A and DVR-215 to NOSETXFER device quirk list

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
9 years ago[libata] pata_bf54x: Support sg list in bmdma transfer.
Sonic Zhang [Wed, 4 Jan 2012 06:06:51 +0000 (14:06 +0800)]
[libata] pata_bf54x: Support sg list in bmdma transfer.

BF54x on-chip ATAPI controller allows maximum 0x1fffe bytes to be transfered
in one ATAPI transfer. So, set the max sg_tablesize to 4.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
9 years ago[libata] sata_fsl: fix the controller operating mode
Jerry Huang [Tue, 20 Dec 2011 06:50:27 +0000 (14:50 +0800)]
[libata] sata_fsl: fix the controller operating mode

Configure the FSL SATA controller to the preferred, enterprise mode.

Signed-off-by: Yutaka Ando <r46913@freescale.com>
Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com>
CC: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
9 years ago[libata] enable ata port async suspend
Lin Ming [Mon, 16 Jan 2012 05:23:23 +0000 (13:23 +0800)]
[libata] enable ata port async suspend

This saves devices suspend/resume time.

Tested system suspend/resume with SATA IDE/AHCI mode 3 times.
Below is the time took for devices suspend/resume.

SATA mode    vanilla-kernel           patched-kernel
---------    ---------------------    ---------------------
IDE          suspend: 0.744           suspend: 0.432
             (0.716, 0.768, 0.748)    (0.440, 0.428, 0.428)

             resume: 5.084            resume: 2.209
             (5.100, 5.064, 5.088)    (2.168, 2.232, 2.228)

AHCI:        suspend: 0.725           suspend: 0.449
             (0.740, 0.708, 0.728)    (0.456, 0.448, 0.444)

             resume: 2.556            resume: 1.896
             (2.604, 2.492, 2.572)    (1.932, 1.872, 1.884)

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
9 years ago[media] as3645a: Fix compilation by including slab.h
Laurent Pinchart [Sun, 8 Jan 2012 23:18:19 +0000 (20:18 -0300)]
[media] as3645a: Fix compilation by including slab.h

The as3645a driver calls kzalloc(). Include slab.h.

Reported-by: Fredrik Lingvall <fredrik.lingvall@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
9 years ago[media] s5p-fimc: Remove linux/version.h include from fimc-mdevice.c
Sachin Kamat [Tue, 17 Jan 2012 07:55:25 +0000 (04:55 -0300)]
[media] s5p-fimc: Remove linux/version.h include from fimc-mdevice.c

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
9 years ago[media] s5p-mfc: Remove linux/version.h include from s5p_mfc.c
Sachin Kamat [Tue, 17 Jan 2012 07:52:41 +0000 (04:52 -0300)]
[media] s5p-mfc: Remove linux/version.h include from s5p_mfc.c

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
9 years ago[media] ds3000: using logical && instead of bitwise &
Dan Carpenter [Tue, 17 Jan 2012 06:28:51 +0000 (03:28 -0300)]
[media] ds3000: using logical && instead of bitwise &

The intent here was to test if the FE_HAS_LOCK was set.  The current
test is equivalent to "if (status) { ..."

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
9 years ago[media] v4l2-ctrls: make control names consistent
Hans Verkuil [Mon, 16 Jan 2012 15:27:15 +0000 (12:27 -0300)]
[media] v4l2-ctrls: make control names consistent

Several control names used inconsistent capitalization or were inconsistent
in other ways. I also corrected a spelling mistake and fixed four strings
that were too long (>31 characters). Harmless, but the string is cut off when
it is returned with QUERYCTRL.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
9 years ago[media] DVB: dib0700, add support for Nova-TD LEDs
Jiri Slaby [Tue, 10 Jan 2012 17:11:25 +0000 (14:11 -0300)]
[media] DVB: dib0700, add support for Nova-TD LEDs

Add an override of read_status to intercept lock status. This allows
us to switch LEDs appropriately on and off with signal un/locked.

The second phase is to override sleep to properly turn off both.

This is a hackish way to achieve that.

Thanks to Mike Krufky for his help.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
9 years ago[media] DVB: dib0700, add corrected Nova-TD frontend_attach
Jiri Slaby [Tue, 10 Jan 2012 17:11:24 +0000 (14:11 -0300)]
[media] DVB: dib0700, add corrected Nova-TD frontend_attach

This means cut & paste from the former f. attach. But while at it write
to the right GPIO to turn on the right LED. Also turn the other two
off jsut for sure.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
9 years ago[media] DVB: dib0700, separate stk7070pd initialization
Jiri Slaby [Tue, 10 Jan 2012 17:11:23 +0000 (14:11 -0300)]
[media] DVB: dib0700, separate stk7070pd initialization

The start is common for both stk7070pd and novatd specific routine.
This is just a preparation for the next patch.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
9 years ago[media] DVB: dib0700, move Nova-TD Stick to a separate set
Jiri Slaby [Tue, 10 Jan 2012 17:11:22 +0000 (14:11 -0300)]
[media] DVB: dib0700, move Nova-TD Stick to a separate set

To properly support the three LEDs which are on the stick, we need
a special handling in the ->frontend_attach function. Thus let's have
a separate ->frontend_attach instead of ifs in the common one.

The hadnling itself will be added in further patches.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
9 years ago[media] : add MODULE_FIRMWARE to dib0700
Patrick Boettcher [Tue, 17 Jan 2012 11:41:20 +0000 (08:41 -0300)]
[media] : add MODULE_FIRMWARE to dib0700

The dib0700 needs a binary firmware file. This patch added the MODULE_FIRMWARE-macro.

Signed-off-by: Christoph Anton Mitterer <calestyo@scientia.net>
Signed-off-by: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
9 years ago[media] DVB-CORE: remove superfluous DTV_CMDs
Patrick Boettcher [Tue, 17 Jan 2012 08:49:14 +0000 (05:49 -0300)]
[media] DVB-CORE: remove superfluous DTV_CMDs

This small patch removes superfluous DTV_CMDs from dvb_frontend.c which were added in the initially when ISBD-T support was added.
They were there unnoticed even though compilers should have warning about those duplicates. Finally they did and now we can remove them.

Thanks to Dan Carpenter <dan.carpenter@oracle.com> for pointing that out.

Signed-off-by: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
9 years ago[media] s5p-jpeg: adapt to recent videobuf2 changes
Marek Szyprowski [Fri, 13 Jan 2012 08:12:38 +0000 (05:12 -0300)]
[media] s5p-jpeg: adapt to recent videobuf2 changes

queue_setup callback has been extended with struct v4l2_format *fmt
parameter in 2d86401c2c commit. This patch adds this parameter to
s5p-jpeg driver.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
9 years ago[media] s5p-g2d: fixed a bug in controls setting function
Kamil Debski [Mon, 2 Jan 2012 12:19:25 +0000 (09:19 -0300)]
[media] s5p-g2d: fixed a bug in controls setting function

Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
9 years ago[media] s5p-mfc: Fix volatile controls setup
Kamil Debski [Tue, 27 Dec 2011 13:07:24 +0000 (10:07 -0300)]
[media] s5p-mfc: Fix volatile controls setup

Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
9 years ago[media] drivers/media/video/s5p-mfc/s5p_mfc.c: adjust double test
Julia Lawall [Thu, 12 Jan 2012 20:49:30 +0000 (17:49 -0300)]
[media] drivers/media/video/s5p-mfc/s5p_mfc.c: adjust double test

Rewrite a duplicated test to test the correct value

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression E;
@@

(
* E
  || ... || E
|
* E
  && ... && E
)
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
9 years ago[media] drivers/media/video/s5p-fimc/fimc-capture.c: adjust double test
Julia Lawall [Thu, 12 Jan 2012 20:49:28 +0000 (17:49 -0300)]
[media] drivers/media/video/s5p-fimc/fimc-capture.c: adjust double test

Rewrite a duplicated test to test the correct value

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression E;
@@

(
* E
  || ... || E
|
* E
  && ... && E
)
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
9 years ago[media] s5p-fimc: Fix incorrect control ID assignment
Sachin Kamat [Tue, 10 Jan 2012 08:46:57 +0000 (05:46 -0300)]
[media] s5p-fimc: Fix incorrect control ID assignment

This patch fixes the mismatch between control IDs (CID) and controls
for hflip, vflip and rotate.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
9 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris...
Linus Torvalds [Wed, 18 Jan 2012 00:43:39 +0000 (16:43 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/linux-security

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  integrity: digital signature config option name change
  lib: Removed MPILIB, MPILIB_EXTRA, and SIGNATURE prompts
  lib: MPILIB Kconfig description update
  lib: digital signature dependency fix
  lib: digital signature config option name change
  encrypted-keys: fix rcu and sparse messages
  keys: fix trusted/encrypted keys sparse rcu_assign_pointer messages
  KEYS: Add missing smp_rmb() primitives to the keyring search code
  TOMOYO: Accept \000 as a valid character.
  security: update MAINTAINERS file with new git repo

9 years agogpio/it8761e: Restrict it8761e gpio driver to x86.
Grant Likely [Wed, 11 Jan 2012 18:03:41 +0000 (11:03 -0700)]
gpio/it8761e: Restrict it8761e gpio driver to x86.

This driver does an unconditional read of io space during module init which
causes a bad dereference on ARM.  It looks to me like this is an x86 only
drivers, so restrict it to only compile on x86.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Denis Turischev <denis@compulab.co.il>