~shefty/rdma-dev.git
11 years agomtd: Remove redundant mutex from mtd_blkdevs.c
David Woodhouse [Sat, 30 Oct 2010 11:39:21 +0000 (12:39 +0100)]
mtd: Remove redundant mutex from mtd_blkdevs.c

In commit 2a48fc0ab24241755dc93bfd4f01d68efab47f5a ('block: autoconvert
trivial BKL users to private mutex'), Arnd replaced the BKL usage with a
mutex. However, Maxim has already provided a better fix in commit
480792b7bf188c29b8d4b10fee65c3a06ec5dbf7 ('mtd: blktrans: kill BKL'),
which was simply to remove the BKL without replacing it — since he'd
already made it do all necessary locking for itself.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux...
David Woodhouse [Sat, 30 Oct 2010 11:35:11 +0000 (12:35 +0100)]
Merge branch 'master' of git://git./linux/kernel/git/torvalds/linux-2.6.git

Conflicts:
drivers/mtd/mtd_blkdevs.c

Merge Grant's device-tree bits so that we can apply the subsequent fixes.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agoMTD: Fix wrong check register_blkdev return value
Frank Li [Tue, 26 Oct 2010 03:02:19 +0000 (11:02 +0800)]
MTD: Fix wrong check register_blkdev return value

register_blkdev return 1..255 when major = 0.

if (ret ) {
printk(KERN_WARNING "Unable to register %s block device on major %d: %d\n",
tr->name, tr->major, ret);
      mutex_unlock(&mtd_table_mutex);
return ret;
}

Above code will return fail when register_blkdev return allocated major number.

Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agoRevert "mtd: cleanup Kconfig dependencies"
David Woodhouse [Tue, 26 Oct 2010 10:42:51 +0000 (11:42 +0100)]
Revert "mtd: cleanup Kconfig dependencies"

This reverts commit 432dc821c90114f9b0e00f6752a700e937516ade.

The individual CFI geometry options were carefully set up to get sane
default values if the CFI_ADV_OPTIONS wasn't set, and it wasn't
appropriate to move them into an if/endif block.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: cfi_cmdset_0002: make sector erase command variable
Guillaume LECERF [Tue, 26 Oct 2010 09:45:23 +0000 (10:45 +0100)]
mtd: cfi_cmdset_0002: make sector erase command variable

Some old SST chips use 0x50 as sector erase command, instead
of 0x30. Make this value variable to handle such chips.

Signed-off-by: Guillaume LECERF <glecerf@gmail.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: cfi_cmdset_0002: add CFI detection for SST 38VF640x chips
Guillaume LECERF [Tue, 26 Oct 2010 10:31:55 +0000 (11:31 +0100)]
mtd: cfi_cmdset_0002: add CFI detection for SST 38VF640x chips

Add support for SST38VF640x chips in CFI mode.

Signed-off-by: Guillaume LECERF <glecerf@gmail.com>
Signed-off-by: yidong zhang <zhangyd6@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: cfi_util: add support for switching SST 39VF640xB chips into QRY mode
Guillaume LECERF [Tue, 26 Oct 2010 09:26:26 +0000 (10:26 +0100)]
mtd: cfi_util: add support for switching SST 39VF640xB chips into QRY mode

Signed-off-by: Guillaume LECERF <glecerf@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: cfi_cmdset_0001: use defined value of P_ID_INTEL_PERFORMANCE instead of hardcode...
Guillaume LECERF [Tue, 26 Oct 2010 09:55:29 +0000 (10:55 +0100)]
mtd: cfi_cmdset_0001: use defined value of P_ID_INTEL_PERFORMANCE instead of hardcoded one

Signed-off-by: Guillaume LECERF <glecerf@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agoblock2mtd: dubious assignment
Nicolas Kaiser [Fri, 22 Oct 2010 10:47:24 +0000 (12:47 +0200)]
block2mtd: dubious assignment

When block2mtd_erase fails, a duplicated assignment instantly
changes instr->state from MTD_ERASE_FAILED to MTD_ERASE_DONE.

It looks to me like this might not be intended, or is it?

Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Acked-By: Joern Engel <joern@logfs.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agoMerge branch 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6
Linus Torvalds [Mon, 25 Oct 2010 15:19:14 +0000 (08:19 -0700)]
Merge branch 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6

* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6:
  mtd/m25p80: add support to parse the partitions by OF node
  of/irq: of_irq.c needs to include linux/irq.h
  of/mips: Cleanup some include directives/files.
  of/mips: Add device tree support to MIPS
  of/flattree: Eliminate need to provide early_init_dt_scan_chosen_arch
  of/device: Rework to use common platform_device_alloc() for allocating devices
  of/xsysace: Fix OF probing on little-endian systems
  of: use __be32 types for big-endian device tree data
  of/irq: remove references to NO_IRQ in drivers/of/platform.c
  of/promtree: add package-to-path support to pdt
  of/promtree: add of_pdt namespace to pdt code
  of/promtree: no longer call prom_ functions directly; use an ops structure
  of/promtree: make drivers/of/pdt.c no longer sparc-only
  sparc: break out some PROM device-tree building code out into drivers/of
  of/sparc: convert various prom_* functions to use phandle
  sparc: stop exporting openprom.h header
  powerpc, of_serial: Endianness issues setting up the serial ports
  of: MTD: Fix OF probing on little-endian systems
  of: GPIO: Fix OF probing on little-endian systems

11 years agoMIPS: MT: Fix build error iFPU affinity code
Ralf Baechle [Sun, 24 Oct 2010 21:23:50 +0000 (22:23 +0100)]
MIPS: MT: Fix build error iFPU affinity code

Commit b0ae19811375 ("security: remove unused parameter from
security_task_setscheduler()") broke the build of
arch/mips/kernel/mips-mt-fpaff.c.  The function arguments were
unnecessary, not the semicolon ...

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoMerge branch 'ieee1394-removal' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Mon, 25 Oct 2010 15:05:29 +0000 (08:05 -0700)]
Merge branch 'ieee1394-removal' of git://git./linux/kernel/git/ieee1394/linux1394-2.6

* 'ieee1394-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  ieee1394: remove the old IEEE 1394 driver stack
  ieee1394: move init_ohci1394_dma to drivers/firewire/

Fix trivial change/delete conflict: drivers/ieee1394/eth1394.c is
getting removed, but was modified by the networking merge.

11 years agoCoda: replace BKL with mutex
Yoshihisa Abe [Mon, 25 Oct 2010 06:03:46 +0000 (02:03 -0400)]
Coda: replace BKL with mutex

Replace the BKL with a mutex to protect the venus_comm structure which
binds the mountpoint with the character device and holds the upcall
queues.

Signed-off-by: Yoshihisa Abe <yoshiabe@cs.cmu.edu>
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoCoda: push BKL regions into coda_upcall()
Yoshihisa Abe [Mon, 25 Oct 2010 06:03:45 +0000 (02:03 -0400)]
Coda: push BKL regions into coda_upcall()

Now that shared inode state is locked using the cii->c_lock, the BKL is
only used to protect the upcall queues used to communicate with the
userspace cache manager. The remaining state is all local and we can
push the lock further down into coda_upcall().

Signed-off-by: Yoshihisa Abe <yoshiabe@cs.cmu.edu>
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoCoda: add spin lock to protect accesses to struct coda_inode_info.
Yoshihisa Abe [Mon, 25 Oct 2010 06:03:44 +0000 (02:03 -0400)]
Coda: add spin lock to protect accesses to struct coda_inode_info.

We mostly need it to protect cached user permissions. The c_flags field
is advisory, reading the wrong value is harmless and in the worst case
we hit a slow path where we have to make an extra upcall to the
userspace cache manager when revalidating a dentry or inode.

Signed-off-by: Yoshihisa Abe <yoshiabe@cs.cmu.edu>
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Linus Torvalds [Mon, 25 Oct 2010 14:59:01 +0000 (07:59 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (75 commits)
  Input: wacom - specify Cinitq supported tools
  Input: ab8500-ponkey - fix IRQ freeing in error path
  Input: adp5588-keys - use more obvious i2c_device_id name string
  Input: ad7877 - switch to using threaded IRQ
  Input: ad7877 - use attribute group to control visibility of attributes
  Input: serio - add support for PS2Mult multiplexer protocol
  Input: wacom - properly enable runtime PM
  Input: ad7877 - filter events where pressure is beyond the maximum
  Input: ad7877 - implement EV_KEY:BTN_TOUCH reporting
  Input: ad7877 - implement specified chip select behavior
  Input: hp680_ts_input - use cancel_delayed_work_sync()
  Input: mousedev - correct lockdep annotation
  Input: ads7846 - switch to using threaded IRQ
  Input: serio - support multiple child devices per single parent
  Input: synaptics - simplify pass-through port handling
  Input: add ROHM BU21013 touch panel controller support
  Input: omap4-keypad - wake-up on events & long presses
  Input: omap4-keypad - fix interrupt line configuration
  Input: omap4-keypad - SYSCONFIG register configuration
  Input: omap4-keypad - use platform device helpers
  ...

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
Linus Torvalds [Mon, 25 Oct 2010 14:51:49 +0000 (07:51 -0700)]
Merge git://git./linux/kernel/git/lethal/sh-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (110 commits)
  sh: i2c-sh7760: Replase from ctrl_* to __raw_*
  sh: clkfwk: Shuffle around to match the intc split up.
  sh: clkfwk: modify for_each_frequency end condition
  sh: fix clk_get() error handling
  sh: clkfwk: Fix fault in frequency iterator.
  sh: clkfwk: Add a helper for rate rounding by divisor ranges.
  sh: clkfwk: Abstract rate rounding helper.
  sh: clkfwk: support clock remapping.
  sh: pci: Convert to upper/lower_32_bits() helpers.
  sh: mach-sdk7786: Add support for the FPGA SRAM.
  sh: Provide a generic SRAM pool for tiny memories.
  sh: pci: Support secondary FPGA-driven PCIe clocks on SDK7786.
  sh: pci: Support slot 4 routing on SDK7786.
  sh: Fix up PMB locking.
  sh: mach-sdk7786: Add support for fpga gpios.
  sh: use pr_fmt for clock framework, too.
  sh: remove name and id from struct clk
  sh: free-without-alloc fix for sh_mobile_lcdcfb
  sh: perf: Set up perf_max_events.
  sh: perf: Support SH-X3 hardware counters.
  ...

Fix up trivial conflicts (perf_max_events got removed) in arch/sh/kernel/perf_event.c

11 years agoMerge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
Linus Torvalds [Mon, 25 Oct 2010 14:45:10 +0000 (07:45 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  Revert "block: fix accounting bug on cross partition merges"

11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Linus Torvalds [Mon, 25 Oct 2010 14:44:27 +0000 (07:44 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/gerg/m68knommu

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: (21 commits)
  m68knommu: convert to using tracehook_report_syscall_*
  m68knommu: some boards use fixed phy for FEC ethernet
  m68knommu: support the external GPIO based interrupts of the 5272
  m68knommu: mask of vector bits in exception word properly
  m68knommu: change to new flag variables
  m68knommu: Fix MCFUART_TXFIFOSIZE for m548x.
  m68knommu: add basic mmu-less m548x support
  m68knommu: .gitignore vmlinux.lds
  m68knommu: stop using __do_IRQ
  m68knommu: rename PT_OFF_VECTOR to PT_OFF_FORMATVEC.
  m68knommu: add support for Coldfire 547x/548x interrupt controller
  m68k{nommu}: Remove unused DEFINE's from asm-offsets.c
  m68knommu: whitespace cleanup in 68328/entry.S
  m68knommu: Document supported chips in intc-2.c and intc-simr.c.
  m68knommu: fix strace support for 68328/68360
  m68knommu: fix default starting date
  arch/m68knommu: Removing dead 68328_SERIAL_UART2 config option
  arch/m68knommu: Removing dead RAM_{16,32}_MB config option
  arch/m68knommu: Removing dead M68KFPU_EMU config option
  arch/m68knommu: Removing dead RELOCATE config option
  ...

11 years agoP4080/mtd: Fix the freescale lbc issue with 36bit mode
Lan Chunhe-B25806 [Mon, 18 Oct 2010 07:22:32 +0000 (15:22 +0800)]
P4080/mtd: Fix the freescale lbc issue with 36bit mode

When system uses 36bit physical address, res.start is 36bit
physical address. But the function of in_be32 returns 32bit
physical address. Then both of them compared each other is
wrong. So by converting the address of res.start into
the right format fixes this issue.

Signed-off-by: Lan Chunhe-B25806 <b25806@freescale.com>
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Reviewed-by: Anton Vorontsov <cbouatmailru@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agoP4080/eLBC: Make Freescale elbc interrupt common to elbc devices
Roy Zang [Mon, 18 Oct 2010 07:22:31 +0000 (15:22 +0800)]
P4080/eLBC: Make Freescale elbc interrupt common to elbc devices

Move Freescale elbc interrupt from nand driver to elbc driver.
Then all elbc devices can use the interrupt instead of ONLY nand.

For former nand driver, it had the two functions:

1. detecting nand flash partitions;
2. registering elbc interrupt.

Now, second function is removed to fsl_lbc.c.

Signed-off-by: Lan Chunhe-B25806 <b25806@freescale.com>
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Reviewed-by: Anton Vorontsov <cbouatmailru@gmail.com>
Cc: Wood Scott-B07421 <B07421@freescale.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agoMerge branch 'next' into for-linus
Dmitry Torokhov [Mon, 25 Oct 2010 05:11:17 +0000 (22:11 -0700)]
Merge branch 'next' into for-linus

11 years agoInput: wacom - specify Cinitq supported tools
Ping Cheng [Mon, 25 Oct 2010 04:53:40 +0000 (21:53 -0700)]
Input: wacom - specify Cinitq supported tools

Cintiq, being a display tablet, doesn't have mouse and associated BTN_s.
Make sure we do not specify them when registering Cintiq's input device
so that userland can retrieve the exact tool set the device supports.

Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: ab8500-ponkey - fix IRQ freeing in error path
Nicolas Kaiser [Mon, 25 Oct 2010 04:48:11 +0000 (21:48 -0700)]
Input: ab8500-ponkey - fix IRQ freeing in error path

Looks like an obvious typo to me.

Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agosh: i2c-sh7760: Replase from ctrl_* to __raw_*
Nobuhiro Iwamatsu [Fri, 22 Oct 2010 22:07:00 +0000 (07:07 +0900)]
sh: i2c-sh7760: Replase from ctrl_* to __raw_*

ctrl_* is deprecated. We should to use __raw_*.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
11 years agomtd: phram: use KBUILD_MODNAME
Joe Perches [Wed, 20 Oct 2010 17:39:22 +0000 (10:39 -0700)]
mtd: phram: use KBUILD_MODNAME

Use the more standard #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
No change in output strings.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: OneNAND: S5PC110: Fix double call suspend & resume function
Kyungmin Park [Wed, 20 Oct 2010 08:31:02 +0000 (17:31 +0900)]
mtd: OneNAND: S5PC110: Fix double call suspend & resume function

The suspend & resume called from mtd core. So no need to call at driver.

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: nand: fix MTD_MODE_RAW writes
Jon Povey [Thu, 30 Sep 2010 11:41:34 +0000 (20:41 +0900)]
mtd: nand: fix MTD_MODE_RAW writes

RAW writes were broken by 782ce79a45b3b850b108896fcf7da26754061c8f
which introduced a check of ops->ooboffs in nand_do_write_ops().

When writing in RAW mode this is called with an ops struct on the stack
of mtdchar.c:mtd_write() which does not initialise ops->ooboffs, so it
is garbage and fails this test.

This test does not make sense if ops->oobbuf is NULL, which it is in the
RAW write path, so include that in the test.

Signed-off-by: Jon Povey <jon.povey@racelogic.co.uk>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agojffs2: use kmemdup
Julia Lawall [Sun, 17 Oct 2010 19:56:15 +0000 (21:56 +0200)]
jffs2: use kmemdup

Convert a sequence of kmalloc and memcpy to use kmemdup.

The semantic patch that performs this transformation is:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression a,flag,len;
expression arg,e1,e2;
statement S;
@@

  a =
-  \(kmalloc\|kzalloc\)(len,flag)
+  kmemdup(arg,len,flag)
  <... when != a
  if (a == NULL || ...) S
  ...>
- memcpy(a,arg,len+1);
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: sm_ftl: cosmetic, use bool when possible
Maxim Levitsky [Fri, 15 Oct 2010 15:20:47 +0000 (17:20 +0200)]
mtd: sm_ftl: cosmetic, use bool when possible

I didn't know that kernel allows use of that typedef.

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: r852: remove useless pci powerup/down from suspend/resume routines
Maxim Levitsky [Fri, 15 Oct 2010 15:20:46 +0000 (17:20 +0200)]
mtd: r852: remove useless pci powerup/down from suspend/resume routines

It turns out that pci core now handles these, so this code is redundant
and can even cause bugs

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: blktrans: fix a race vs kthread_stop
Maxim Levitsky [Fri, 15 Oct 2010 15:20:45 +0000 (17:20 +0200)]
mtd: blktrans: fix a race vs kthread_stop

There is small race window that could make kthread_stop hang forever.
I found that while hacking the IR subsystem.

Signed-off-by: Maxim Levitsky <maximlevisky@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: blktrans: kill BKL
Maxim Levitsky [Fri, 15 Oct 2010 15:20:44 +0000 (17:20 +0200)]
mtd: blktrans: kill BKL

It not needed, because I already added locking for all fops
methods.

Signed-off-by: Maxim Levitsky <maximlevisky@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: allow to unload the mtdtrans module if its block devices aren't open
Maxim Levitsky [Fri, 15 Oct 2010 15:20:43 +0000 (17:20 +0200)]
mtd: allow to unload the mtdtrans module if its block devices aren't open

Now it once again possible to remove mtdtrans module.
You still need to ensure that block devices of that module aren't mounted.
This is due to the fact that as long as a block device is open, it still exists,
therefore if we were to allow module removal, this block device might became used again.

This time in addition to code review, I also made the code
pass some torture tests like module reload in  a loop + read in a loop +
card insert/removal all at same time.

The blktrans_open/blktrans_release don't take the mtd table lock because:

While device is added (that includes execution of add_mtd_blktrans_dev)
the lock is already taken

Now suppose the device will never be removed. In this case even if we have changes
in mtd table, the entry that we need will stay exactly the same. (Note that we don't
look at table at all, just following private pointer of block device).

Now suppose that someone tries to remove the mtd device.
This will be propagated to trans driver which _ought_ to call del_mtd_blktrans_dev
which will take the per device lock, release the mtd device and set trans->mtd = NULL.
>From this point on, following opens won't even be able to know anything about that mtd device
(which at that point is likely not to exist)
Also the same care is taken not to trip over NULL mtd pointer in blktrans_dev_release.

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Tested-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: maps: gpio-addr-flash: fix warnings and make more portable
Mike Frysinger [Sat, 16 Oct 2010 22:31:14 +0000 (18:31 -0400)]
mtd: maps: gpio-addr-flash: fix warnings and make more portable

As reported on lkml, building this module for HIMEM systems spews warnings
about mismatch in pointer types.  Further, we need to use ioremap() in order
to properly access the flash memory on most systems rather than just doing
it directly.

Reported-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: Blackfin NFC: fix badblock location with BootROM OOB
Mike Frysinger [Sat, 16 Oct 2010 22:26:59 +0000 (18:26 -0400)]
mtd: Blackfin NFC: fix badblock location with BootROM OOB

The bbt structure isn't actually used, just the badblockpos.  This lets
the driver correctly handle badblocks with the different OOB layout with
certain sized flashes.  Previously, the blocks would all be reported as
bad and be completely unusable.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: cfi_cmdset_0002: code cleanups
Wolfram Sang [Sat, 16 Oct 2010 12:56:22 +0000 (14:56 +0200)]
mtd: cfi_cmdset_0002: code cleanups

- remove disabled code (hasn't been touched since the beginning of git
  and should be reimplemented if really needed)
- convert remaining c++-comments to plain c-style

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Guillaume LECERF <glecerf@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: onenand: fix 4KiB page onenand chip recognition
Roman Tereshonkov [Mon, 11 Oct 2010 11:47:32 +0000 (14:47 +0300)]
mtd: onenand: fix 4KiB page onenand chip recognition

For 4Gib non-DDP chip it does not follow that it is always 4KiB page chip.
The number of data buffers is checked and if it is equal to 1
we suppose that it is 4KiB page onenand chip.

Signed-off-by: Roman Tereshonkov <roman.tereshonkov@nokia.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: physmap_of: Loop through all "reg" tuples for mapping
Stefan Roese [Fri, 8 Oct 2010 12:41:27 +0000 (14:41 +0200)]
mtd: physmap_of: Loop through all "reg" tuples for mapping

This patch changes the loop over the "reg" tuples to not exit
directly upon of_address_to_resource() failure but to continue
with the next "reg" tuple instead. This failure could be due to
size = 0, which might be passed via the device-tree.

This is needed for boards, where a "reg" tuple might have size 0
(of_address_to_resource() returns with EINVAL when size = 0).

Example:

Fully equipped board:

reg = <0 0x00000000 0x00400000
       0 0x00400000 0x00400000>;

Partially equipped board:

reg = <0 0x00000000 0x00400000
       0 0x00400000 0x00000000>;

This could be the case on boards with runtime detection of
multiple NOR flash configurations where the detected flash size
is inserted into the dtb in U-Boot.

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agojffs2: Reduce excessive scan of empty blocks
Joakim Tjernlund [Thu, 7 Oct 2010 17:09:34 +0000 (19:09 +0200)]
jffs2: Reduce excessive scan of empty blocks

Scanning 1024 bytes to see if an EB is empty is a bit much.
Lower it to 256 bytes and make sure the while loop is
optimized.

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agojffs2: Fix serious write stall due to erase
Joakim Tjernlund [Thu, 7 Oct 2010 16:01:44 +0000 (18:01 +0200)]
jffs2: Fix serious write stall due to erase

Drop the alloc_sem before erasing flash in
jffs2_garbage_collect_pass().
Otherwise writes are put on hold until the erase
has finised.

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: omap2: fix static declaration warning
G, Manjunath Kondaiah [Tue, 5 Oct 2010 21:56:56 +0000 (03:26 +0530)]
mtd: omap2: fix static declaration warning

This patch fixes sparse warning for static declaration of variable "use_dma"

drivers/mtd/nand/omap2.c:114:11: warning: symbol 'use_dma' was not declared. Should it be static?

Signed-off-by: G, Manjunath Kondaiah <manjugk@ti.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agojffs2: Dynamically choose inocache hash size
Daniel Drake [Thu, 7 Oct 2010 18:14:02 +0000 (19:14 +0100)]
jffs2: Dynamically choose inocache hash size

When JFFS2 is used for large volumes, the mount times are quite long.
Increasing the hash size provides a significant speed boost on the OLPC
XO-1 laptop.

Add logic that dynamically selects a hash size based on the size of
the medium. A 64mb medium will result in a hash size of 128, and a 512mb
medium will result in a hash size of 1024.

Signed-off-by: Daniel Drake <dsd@laptop.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: remove junk tabs in nand.h
Sebastian Andrzej Siewior [Thu, 7 Oct 2010 19:48:27 +0000 (21:48 +0200)]
mtd: remove junk tabs in nand.h

Remove tabs between type and name.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: cleanup nand.h
Sebastian Andrzej Siewior [Tue, 5 Oct 2010 10:41:01 +0000 (12:41 +0200)]
mtd: cleanup nand.h

- *var instead of * var
- proper multiline comment
- func(args) instead of func (args)
- 80 lines

So from
|total: 2 errors, 37 warnings, 654 lines checked
we got to one warning.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: Fix endianness issues from device tree
Ian Munsie [Fri, 1 Oct 2010 07:06:08 +0000 (17:06 +1000)]
mtd: Fix endianness issues from device tree

This patch adds the appropriate conversions to correct the endianness
issues in the MTD driver whenever it accesses the device tree (which is
always big endian).

Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: m25p80.c: Add support for S25FL032P spi-nor flash devices.
David Jander [Thu, 30 Sep 2010 11:26:02 +0000 (13:26 +0200)]
mtd: m25p80.c: Add support for S25FL032P spi-nor flash devices.

Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: nandsim: add module param for BBT handling
Sebastian Andrzej Siewior [Wed, 29 Sep 2010 17:43:54 +0000 (19:43 +0200)]
mtd: nandsim: add module param for BBT handling

I used this to check the BBT on flash together with a hack in mtdchar in
order to read bad blocks.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: nand: introduce NAND_CREATE_EMPTY_BBT
Sebastian Andrzej Siewior [Fri, 1 Oct 2010 19:37:37 +0000 (21:37 +0200)]
mtd: nand: introduce NAND_CREATE_EMPTY_BBT

it will create an empty BBT table without considering vendor's BBT
information. Vendor's information may be unavailable if the NAND
controller has a different DATA & OOB layout or this information may be
allready purged.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: nand: add support for BBT without OOB
Sebastian Andrzej Siewior [Thu, 30 Sep 2010 19:28:01 +0000 (21:28 +0200)]
mtd: nand: add support for BBT without OOB

The first (sixt) byte in the OOB area contains vendor's bad block
information. During identification of the NAND chip this information is
collected by scanning the complete chip.
The option NAND_USE_FLASH_BBT is used to store this information in a sector so
we don't have to scan the complete flash. Unfortunately the code stores
a marker in order to recognize the BBT in the OOB area. This will fail
if the OOB area is completely used for ECC.
This patch introduces the option NAND_USE_FLASH_BBT_NO_OOB which has to be
used with NAND_USE_FLASH_BBT. It will then store BBT on flash without
touching the OOB area. The BBT format on flash remains same except the
first page starts with the recognition pattern followed by the version byte.
This change was tested in nandsim and it looks good so far :)

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: nand: pull in td into read_bbt()
Sebastian Andrzej Siewior [Wed, 29 Sep 2010 17:43:51 +0000 (19:43 +0200)]
mtd: nand: pull in td into read_bbt()

No code change.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: nand: use ALIGN where possible
Sebastian Andrzej Siewior [Wed, 29 Sep 2010 17:43:50 +0000 (19:43 +0200)]
mtd: nand: use ALIGN where possible

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: OneNAND: S5PC210 OneNAND support
Kyungmin Park [Wed, 29 Sep 2010 05:32:05 +0000 (14:32 +0900)]
mtd: OneNAND: S5PC210 OneNAND support

S5PC210 has the same OneNAND controller as S5PC110

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: OneNAND: S5PC110: Implement DMA interrupt method
Kyungmin Park [Tue, 28 Sep 2010 10:27:15 +0000 (19:27 +0900)]
mtd: OneNAND: S5PC110: Implement DMA interrupt method

Implement DMA interrupt method. previous time it polls the DMA status.
It can reduce the CPU power but decrease the performance a little.

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: OneNAND: S5PC110: Fix wrong DMA handling when HIGHMEM
Kyungmin Park [Tue, 28 Sep 2010 10:27:10 +0000 (19:27 +0900)]
mtd: OneNAND: S5PC110: Fix wrong DMA handling when HIGHMEM

When use HIGHMEM, dma_map_single doesn't get the proper DMA address.
So use the dma_map_page in this case.

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: OneNAND: S5PC100: Only S5PC110 use the command map method
Kyungmin Park [Tue, 28 Sep 2010 10:27:00 +0000 (19:27 +0900)]
mtd: OneNAND: S5PC100: Only S5PC110 use the command map method

After S5PC110 use the generic method for OneNAND.

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: MLC device check in OneNAND driver
Rohit Hassan Sathyanarayan [Mon, 27 Sep 2010 10:32:10 +0000 (16:02 +0530)]
mtd: MLC device check in OneNAND driver

The MLC NAND Flash differs from the SLC NAND flash in functioning
and the cell structure. Therefore we are considering it as a
different Flash type.

Signed-off-by: Rohit H.S <rohit.hs@samsung.com>
Signed-off-by: Raghav Gupta <gupta.raghav@samsung.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: Define MLC Flash as a different flash type
Rohit Hassan Sathyanarayan [Mon, 27 Sep 2010 10:32:03 +0000 (16:02 +0530)]
mtd: Define MLC Flash as a different flash type

MLC NAND Flash has a different cell structure and differs in
functioning than the SLC NAND Flash. Hence we are considering it as
a different Flash type.

Signed-off-by: Rohit H.S <rohit.hs@samsung.com>
Signed-off-by: Raghav Gupta <gupta.raghav@samsung.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: OneNAND: S5PC110: Add timeout to prevent the endless loop
Kyungmin Park [Mon, 27 Sep 2010 07:25:17 +0000 (16:25 +0900)]
mtd: OneNAND: S5PC110: Add timeout to prevent the endless loop

There's no case timeout but add it for some H/W problem or
wrong codes implementation

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: add init_size hook for NAND driver
Huang Shijie [Mon, 27 Sep 2010 02:43:53 +0000 (10:43 +0800)]
mtd: add init_size hook for NAND driver

Not all the NAND devices have all the information in additional
id bytes.

So add a hook in the nand_chip{} is a good method to calculate the
right value of oobsize, erasesize and so on.

Without the hook,you will get the wrong value, and you have to hack
in the ->scan_bbt() to change the wrong value which make the code
mess.

Signed-off-by: Huang Shijie <shijie8@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agojffs2: drop unused model argument
Mike Frysinger [Thu, 23 Sep 2010 02:52:33 +0000 (22:52 -0400)]
jffs2: drop unused model argument

The jffs2 compression framework provides a "model" argument when
compressing and decompressing, but the caller always passes in NULL
and the callees never use it.  So punt this useless overhead.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: add BLKPG API based repartition support
Roman Tereshonkov [Fri, 17 Sep 2010 10:31:42 +0000 (13:31 +0300)]
mtd: add BLKPG API based repartition support

Add support for mtd repartition based on the block
device BLKPG interface:
BLKPG_ADD_PARTITION - for partition creation;
BLKPG_DEL_PARTITION - for partition delete

The usage is based on BLKPG ioctl called with
struct blkpg_ioctl_arg argument which includes the
reference to struct blkpg_partition discribing the
partition offset and length.

Disadvantage: there is no implementation for mtd
flags control. The flags are always borrowed from
the master device.

Signed-off-by: Roman Tereshonkov <roman.tereshonkov@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: prepare partition add and del functions for ioctl requests
Roman Tereshonkov [Fri, 17 Sep 2010 10:31:41 +0000 (13:31 +0300)]
mtd: prepare partition add and del functions for ioctl requests

mtd_is_master, mtd_add_partition and mtd_del_partition functions
are added to give the possibility of partition manipulation
by ioctl request.

The old partition add function is modified to fit the dynamic
allocation.

Signed-off-by: Roman Tereshonkov <roman.tereshonkov@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agoARM: platform data to use the FSMC NAND with the U300
Linus Walleij [Sun, 12 Sep 2010 22:35:37 +0000 (00:35 +0200)]
ARM: platform data to use the FSMC NAND with the U300

Just as it says, if this is merged along with the other patch, the
driver supports the U300 NAND flash interface.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: generic FSMC NAND MTD driver
Linus Walleij [Sun, 12 Sep 2010 22:35:22 +0000 (00:35 +0200)]
mtd: generic FSMC NAND MTD driver

This is the same driver submitted by ST Micros SPEAr team but
generalized and tested on the ST-Ericsson U300. It probably
easily works on the NHK8815 too.

Signed-off-by: Vipin Kumar <vipin.kumar@st.com>
Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar@st.com>
Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com>
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agojffs2: use cond_resched() instead of yield()
Wolfram Sang [Wed, 1 Sep 2010 16:03:41 +0000 (18:03 +0200)]
jffs2: use cond_resched() instead of yield()

yield() has different semantics meanwhile and even causes RT-kernels to
BUG. Replace the only appearance left in jffs2.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: m25p80: Add support for the Winbond W25Q64
Thierry Reding [Mon, 30 Aug 2010 11:00:48 +0000 (13:00 +0200)]
mtd: m25p80: Add support for the Winbond W25Q64

This patch adds support for the Winbond W25Q64 serial flash.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: nand_base: do not cache pages with uncorrectable ECC errors
Artem Bityutskiy [Fri, 3 Sep 2010 19:01:16 +0000 (22:01 +0300)]
mtd: nand_base: do not cache pages with uncorrectable ECC errors

Currently MTD caches the last read NAND page, even if there was an uncorrectable ECC
error. This patch prevents caching in case of uncorrectable ECC errors. The reason
is that we want to allow the user to re-read the NAND page several times. In case of
unstable bits re-trying may help.

Moreover, current behavior is wrong because the first read returns -EBADMSG (correctly)
but the second read succeeds and incorrectly returns 0 (because we read from the cache).

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: add Broadcom BCM63xx image tag partition parser
Florian Fainelli [Sun, 12 Sep 2010 13:52:59 +0000 (15:52 +0200)]
mtd: add Broadcom BCM63xx image tag partition parser

This patch adds support for parsing Broadcom BCM63xx image tag format and
creating MTD partitions accordingly. This driver is a platform_device which
can be instantiated accordingly by bcm63xx board support code.

Signed-off-by: Daniel Dickinson <cshore@csolve.net>
Signed-off-by: Mike Albon <malbon@openwrt.org>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: sanity check ioctl input
Dan Carpenter [Wed, 8 Sep 2010 19:39:56 +0000 (21:39 +0200)]
mtd: sanity check ioctl input

If "ur_idx" is wrong we could go past the end of the array.  The
"ur_idx" comes from root so it's not a huge deal, but adding a sanity
check makes the code more robust.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: fix the build warning for fsl_upm.c
Roy Zang [Wed, 8 Sep 2010 08:47:55 +0000 (16:47 +0800)]
mtd: fix the build warning for fsl_upm.c

Fix the build warning:

drivers/mtd/nand/fsl_upm.c: In function 'fun_chip_init':
drivers/mtd/nand/fsl_upm.c:190: warning: format '%x' expects type 'unsigned int', but argument 3 has type 'resource_size_t'

Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: fix almost all checkpatch warnings in nand_base.c
Florian Fainelli [Tue, 7 Sep 2010 11:23:45 +0000 (13:23 +0200)]
mtd: fix almost all checkpatch warnings in nand_base.c

Only 3 warnings are left, one is off by one character, but splitting the line
would reduce the readability. One is for a for loop statement, which would also
not improve readability. The last one is a false positive on a test.

Artem: it is much easier to verify patches against nand_base.c with
       checkpatch.pl when nand_base.c itself does not have so many
       checkpatch.pl warnings.

Signed-off-by: Florian Fainelli <ffainelli@freebox.fr>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: fix all checkpatch errors in nand_base.c
Florian Fainelli [Tue, 7 Sep 2010 11:23:43 +0000 (13:23 +0200)]
mtd: fix all checkpatch errors in nand_base.c

Artem: it is much easier to verify patches against nand_base.c with
       checkpatch.pl when nand_base.c itself does not have so many
       checkpatch.pl warnings.

Signed-off-by: Florian Fainelli <ffainelli@freebox.fr>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: davinci: relax a timeout for ECC-initialization
Wolfram Sang [Fri, 3 Sep 2010 10:35:37 +0000 (12:35 +0200)]
mtd: davinci: relax a timeout for ECC-initialization

Sudhakar found out that 100µs are enough. Sadly, his updated patch was
overlooked and an older version still using 100ms was merged. Fix this.

Reference: http://patchwork.ozlabs.org/patch/59180/

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: m25p80: Add support for two new Spansion SPI devices (S25FL-K)
Gernot Hoyler [Thu, 2 Sep 2010 15:27:20 +0000 (17:27 +0200)]
mtd: m25p80: Add support for two new Spansion SPI devices (S25FL-K)

This patch adds support for Spansion S25FL016K and S25FL064K SPI flash.
It has been tested with physical devices. Note that both parts exhibit
a Winbond manufacturer ID so they might also be added to that section.

Signed-off-by: Gernot Hoyler <Gernot.Hoyler@spansion.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: nand: split ONFI detection logic to its own function
Florian Fainelli [Wed, 1 Sep 2010 20:28:59 +0000 (22:28 +0200)]
mtd: nand: split ONFI detection logic to its own function

In order to reduce the indentation and improve the readability of nand_get_
flash_type, split the ONFI detection logic to its own function. The detection
logic inside nand_flash_detect_onfi is also rewritten to allow for less
indentation.

Signed-off-by: Florian Fainelli <ffainelli@freebox.fr>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: nand: add support for reading ONFI parameters from NAND device
Florian Fainelli [Mon, 30 Aug 2010 16:32:24 +0000 (18:32 +0200)]
mtd: nand: add support for reading ONFI parameters from NAND device

This patch adds support for reading NAND device ONFI parameters and use
the ONFI informations to define its geometry. In case the device supports
ONFI, the onfi_version field in struct nand_chip contains the version (BCD)
and the onfi_params structure can be used by drivers to set up timings and
such. We currently only support ONFI 1.0 parameters.

Signed-off-by: Brian Norris <norris@broadcom.com>
Signed-off-by: Matthieu Castet <matthieu.castet@parrot.com>
Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Florian Fainelli <ffainelli@freebox.fr>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: nand: denali should also handle NAND_CMD_PARAM
Florian Fainelli [Mon, 30 Aug 2010 16:32:20 +0000 (18:32 +0200)]
mtd: nand: denali should also handle NAND_CMD_PARAM

Signed-off-by: Florian Fainelli <ffainelli@freebox.fr>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: nand: add NAND_CMD_PARAM (0xec) definition
Florian Fainelli [Mon, 30 Aug 2010 16:32:14 +0000 (18:32 +0200)]
mtd: nand: add NAND_CMD_PARAM (0xec) definition

This command is used to read the device ONFI parameters page.

Signed-off-by: Florian Fainelli <ffainelli@freebox.fr>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: OneNAND: Remove unused cmd_map at s5pc110
Kyungmin Park [Fri, 27 Aug 2010 02:55:29 +0000 (11:55 +0900)]
mtd: OneNAND: Remove unused cmd_map at s5pc110

S5PC110 OneNAND controller use the generic functions provided from onenand_base.

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: nand: Samsung MLC - new OOB sizes
Brian Norris [Fri, 20 Aug 2010 17:50:43 +0000 (10:50 -0700)]
mtd: nand: Samsung MLC - new OOB sizes

There are some additions to the detection scheme used by Samsung
MLC NAND. These simple changes to support the 400- and 436-byte OOB
are found in the following data sheet:

Samsung K9GBG08U0M (p.40)

Signed-off-by: Brian Norris <norris@broadcom.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: davinci: fix comment to match the code
Wolfram Sang [Wed, 25 Aug 2010 12:18:20 +0000 (14:18 +0200)]
mtd: davinci: fix comment to match the code

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: pcmciamtd: remove dead code
Dan Carpenter [Tue, 24 Aug 2010 11:56:27 +0000 (13:56 +0200)]
mtd: pcmciamtd: remove dead code

This code isn't reachable.  I looked through the git history and it
hasn't been reachable for years.  Someone removed the label to silence
gcc's unused label warning but these few lines accidentally got left
behind.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: mpc5121_nfc: fix memory leak on error path
Julia Lawall [Sun, 29 Aug 2010 09:52:42 +0000 (11:52 +0200)]
mtd: mpc5121_nfc: fix memory leak on error path

Add a call to of_node_put in the error handling code following a call to
of_find_compatible_node.

Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: pxa3xx_nand: set oob length in the runtime
Lei Wen [Tue, 17 Aug 2010 06:09:30 +0000 (14:09 +0800)]
mtd: pxa3xx_nand: set oob length in the runtime

For different command need different oob requirement, set the proper
oob length by different cmd.

Signed-off-by: Lei Wen <leiwen@marvell.com>
Acked-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: pxa3xx_nand: remove the flash info in driver structure
Lei Wen [Tue, 17 Aug 2010 09:25:57 +0000 (17:25 +0800)]
mtd: pxa3xx_nand: remove the flash info in driver structure

After probe, all info already transfer to driver structure.
There is no need to keep the original flash info.
So that we could safely free the flash info in memory, which may grows
larger when more flash is suported.

Signed-off-by: Lei Wen <leiwen@marvell.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Acked-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: pxa3xx_nand: introduce default timing to reduce read id times
Lei Wen [Wed, 18 Aug 2010 10:00:03 +0000 (18:00 +0800)]
mtd: pxa3xx_nand: introduce default timing to reduce read id times

We certainly don't need to send read id command times by times, since
we already know what the id is after the first read id...

So create a default timing which could ensure it would successfully read
id out all supported chip. Then follow the build-in table to reconfigure
the timing.

Signed-off-by: Lei Wen <leiwen@marvell.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Acked-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: pxa3xx_nand: condense the flash definition
Lei Wen [Tue, 17 Aug 2010 05:50:23 +0000 (13:50 +0800)]
mtd: pxa3xx_nand: condense the flash definition

Adding a new flash definition would need less code.
Keep the platform passing flash definition method.
If one flash is both defined in platform data and builtin table,
driver would select the one from platform data first.

By this way, platform could select the timing most suit for itself,
not need to follow the common settings.

Signed-off-by: Lei Wen <leiwen@marvell.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Acked-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: nand: support new Toshiba SLC
Brian Norris [Fri, 20 Aug 2010 19:36:12 +0000 (12:36 -0700)]
mtd: nand: support new Toshiba SLC

Toshiba does not use ONFI for their NAND flash. So we have to continue
to add new IDs used by Toshiba devices as well as heuristic detection
for scanning the 2nd page for a BBM. This is a relatively harmless
start at supporting many of them.

These chips mostly follow the same ID fields of previous generations,
but there is a need for a tweak.

These chips introduce a strange 576 byte OOB (that's 36 bytes per
512 bytes of page). In the preliminary data, Toshiba has not
defined exactly how their ID strings should decode. In the future,
a new tweak must be added.

Data is taken from, among others, Toshiba TC58TxG4S2FBAxx

Signed-off-by: Brian Norris <norris@broadcom.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: nand: Increase NAND_MAX_OOBSIZE
Brian Norris [Fri, 20 Aug 2010 19:36:13 +0000 (12:36 -0700)]
mtd: nand: Increase NAND_MAX_OOBSIZE

An increase in NAND_MAX_OOBSIZE and NAND_MAX_PAGESIZE is necessary
in order to support many new chips. Among those:

Toshiba TC58TxG4S2FBAxx  8KB page, 576B OOB
Micron MT29F64G08CBAAA   8KB page, 448B OOB

Signed-off-by: Brian Norris <norris@broadcom.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: cleanup Kconfig dependencies
H Hartley Sweeten [Fri, 20 Aug 2010 01:18:21 +0000 (18:18 -0700)]
mtd: cleanup Kconfig dependencies

Remove the MTD!=n dependency since that is handled by drivers/mtd/Kconfig.
Simplify the dependency checks for mtd/chips by using if/endif blocks. Remove
all default n since that is the Kconfig default.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: edit comments on deprecation of ioctl ECCGETLAYOUT
Brian Norris [Mon, 20 Sep 2010 06:57:12 +0000 (23:57 -0700)]
mtd: edit comments on deprecation of ioctl ECCGETLAYOUT

There were some improvements and additions necessary in the
comments explaining of the expansion of nand_ecclayout, the
introduction of nand_ecclayout_user, and the deprecation of the
ioctl ECCGETLAYOUT.

Also, I found a better placement for the macro MTD_MAX_ECCPOS_ENTRIES;
next to the definition of MTD_MAX_OOBFREE_ENTRIES in mtd-abi.h. The macro
is really only important for the ioctl code (found in drivers/mtd/mtdchar.c)
but since there are small edits being made to the user-space header, I
figured this is a better location.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: nand: expand nand_ecc_layout, deprecate ioctl ECCGETLAYOUT
Brian Norris [Wed, 25 Aug 2010 01:12:00 +0000 (18:12 -0700)]
mtd: nand: expand nand_ecc_layout, deprecate ioctl ECCGETLAYOUT

struct nand_ecclayout is too small for many new chips; OOB regions can be as
large as 448 bytes and may increase more in the future. Thus, copying that
struct to user-space with the ECCGETLAYOUT ioctl is not a good idea; the ioctl
would have to be updated every time there's a change to the current largest
size.

Instead, the old nand_ecclayout is renamed to nand_ecclayout_user and a
new struct nand_ecclayout is created that can accomodate larger sizes and
expand without affecting the user-space. struct nand_ecclayout can still
be used in board drivers without modification -- at least for now.

A new function is provided to convert from the new to the old in order to
allow the deprecated ioctl to continue to work with truncated data. Perhaps
the ioctl, the conversion process, and the struct nand_ecclayout_user can be
removed altogether in the future.

Note: There are comments in nand/davinci_nand.c::nand_davinci_probe()
regarding this issue; this driver (and maybe others) can be updated to
account for extra space. All kernel drivers can use the expanded
nand_ecclayout as a drop-in replacement and ignore its benefits.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: inftl.h: fix spacing errors
Brian Norris [Wed, 18 Aug 2010 16:10:58 +0000 (09:10 -0700)]
mtd: inftl.h: fix spacing errors

Replaced some spaces with tabs to fit CodingStyle guidelines

Signed-off-by: Brian Norris <norris@broadcom.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: nand: spansion S30MLxxxP support
Brian Norris [Thu, 19 Aug 2010 15:11:02 +0000 (08:11 -0700)]
mtd: nand: spansion S30MLxxxP support

Some Spansion chips have a method for determining eraseblock size that
is incompatible with similar ID chips of other sizes. This implements
some heuristic detection of these differences.

This patch checks for a 5-byte ID with trailing zeros as well as a
512-byte page size to ensure that chips are not misdetected as the
S30MLxxxP ORNAND series.

[Tweaked by Artem a bit]

Signed-off-by: Brian Norris <norris@broadcom.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agomtd: fix callback return value check
Baruch Siach [Mon, 9 Aug 2010 04:20:23 +0000 (07:20 +0300)]
mtd: fix callback return value check

Drivers may (and do) return negative errno values other than -1 from the
ecc.correct callback.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
11 years agoMerge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Linus Torvalds [Sun, 24 Oct 2010 20:41:39 +0000 (13:41 -0700)]
Merge branch 'for-next' of git://git./linux/kernel/git/jikos/trivial

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
  Update broken web addresses in arch directory.
  Update broken web addresses in the kernel.
  Revert "drivers/usb: Remove unnecessary return's from void functions" for musb gadget
  Revert "Fix typo: configuation => configuration" partially
  ida: document IDA_BITMAP_LONGS calculation
  ext2: fix a typo on comment in ext2/inode.c
  drivers/scsi: Remove unnecessary casts of private_data
  drivers/s390: Remove unnecessary casts of private_data
  net/sunrpc/rpc_pipe.c: Remove unnecessary casts of private_data
  drivers/infiniband: Remove unnecessary casts of private_data
  drivers/gpu/drm: Remove unnecessary casts of private_data
  kernel/pm_qos_params.c: Remove unnecessary casts of private_data
  fs/ecryptfs: Remove unnecessary casts of private_data
  fs/seq_file.c: Remove unnecessary casts of private_data
  arm: uengine.c: remove C99 comments
  arm: scoop.c: remove C99 comments
  Fix typo configue => configure in comments
  Fix typo: configuation => configuration
  Fix typo interrest[ing|ed] => interest[ing|ed]
  Fix various typos of valid in comments
  ...

Fix up trivial conflicts in:
drivers/char/ipmi/ipmi_si_intf.c
drivers/usb/gadget/rndis.c
net/irda/irnet/irnet_ppp.c

11 years agoMerge branch 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/edac
Linus Torvalds [Sun, 24 Oct 2010 20:06:57 +0000 (13:06 -0700)]
Merge branch 'devel' of git://git./linux/kernel/git/mchehab/edac

* 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/edac: (25 commits)
  i7300_edac: Properly initialize per-csrow memory size
  V4L/DVB: i7300_edac: better initialize page counts
  MAINTAINERS: Add maintainer for i7300-edac driver
  i7300-edac: CodingStyle cleanup
  i7300_edac: Improve comments
  i7300_edac: Cleanup: reorganize the file contents
  i7300_edac: Properly detect channel on CE errors
  i7300_edac: enrich FBD error info for corrected errors
  i7300_edac: enrich FBD error info for fatal errors
  i7300_edac: pre-allocate a buffer used to prepare err messages
  i7300_edac: Fix MTR x4/x8 detection logic
  i7300_edac: Make the debug messages coherent with the others
  i7300_edac: Cleanup: remove get_error_info logic
  i7300_edac: Add a code to cleanup error registers
  i7300_edac: Add support for reporting FBD errors
  i7300_edac: Properly detect the type of error correction
  i7300_edac: Detect if the device is on single mode
  i7300_edac: Adds detection for enhanced scrub mode on x8
  i7300_edac: Clear the error bit after reading
  i7300_edac: Add error detection code for global errors
  ...

11 years agoRevert "block: fix accounting bug on cross partition merges"
Jens Axboe [Sun, 24 Oct 2010 20:06:02 +0000 (22:06 +0200)]
Revert "block: fix accounting bug on cross partition merges"

This reverts commit 7681bfeeccff5efa9eb29bf09249a3c400b15327.

Conflicts:

include/linux/genhd.h

It has numerous issues with the cleanup path and non-elevator
devices. Revert it for now so we can come up with a clean
version without rushing things.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg...
Linus Torvalds [Sun, 24 Oct 2010 19:47:55 +0000 (12:47 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/penberg/slab-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6: (27 commits)
  SLUB: Fix memory hotplug with !NUMA
  slub: Move functions to reduce #ifdefs
  slub: Enable sysfs support for !CONFIG_SLUB_DEBUG
  SLUB: Optimize slab_free() debug check
  slub: Move NUMA-related functions under CONFIG_NUMA
  slub: Add lock release annotation
  slub: Fix signedness warnings
  slub: extract common code to remove objects from partial list without locking
  SLUB: Pass active and inactive redzone flags instead of boolean to debug functions
  slub: reduce differences between SMP and NUMA
  Revert "Slub: UP bandaid"
  percpu: clear memory allocated with the km allocator
  percpu: use percpu allocator on UP too
  percpu: reduce PCPU_MIN_UNIT_SIZE to 32k
  vmalloc: pcpu_get/free_vm_areas() aren't needed on UP
  SLUB: Fix merged slab cache names
  Slub: UP bandaid
  slub: fix SLUB_RESILIENCY_TEST for dynamic kmalloc caches
  slub: Fix up missing kmalloc_cache -> kmem_cache_node case for memoryhotplug
  slub: Add dummy functions for the !SLUB_DEBUG case
  ...