~shefty/rdma-dev.git
10 years agoARM: sa11x0: remove old SoC private DMA driver
Russell King [Fri, 13 Jan 2012 12:07:24 +0000 (12:07 +0000)]
ARM: sa11x0: remove old SoC private DMA driver

Now that all users are converted over to using the DMA engine API,
we can get rid of the old platform dependent DMA driver.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoMerge branch 'sa11x0-ir' into sa11x0
Russell King [Sun, 25 Mar 2012 22:54:52 +0000 (23:54 +0100)]
Merge branch 'sa11x0-ir' into sa11x0

10 years agoMerge branch 'sa1111' into sa11x0
Russell King [Sun, 25 Mar 2012 22:54:16 +0000 (23:54 +0100)]
Merge branch 'sa1111' into sa11x0

Conflicts:
arch/arm/common/sa1111.c
arch/arm/mach-sa1100/neponset.c

Fixed:
arch/arm/mach-sa1100/assabet.c
for the neponset changes

10 years agoUSB: sa1111: add hcd .reset method
Russell King [Thu, 26 Jan 2012 11:45:27 +0000 (11:45 +0000)]
USB: sa1111: add hcd .reset method

Add the .reset method to the HCD, and update the .start method
accordingly for this change.

Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoUSB: sa1111: add OHCI shutdown methods
Russell King [Thu, 26 Jan 2012 11:10:20 +0000 (11:10 +0000)]
USB: sa1111: add OHCI shutdown methods

Add OHCI shutdown methods to cleanly shutdown the OHCI controller on
system shutdowns and reboots.  This avoids the controller continuing
to run should be soft-reboot the platform, potentially scribbling
over system memory.

Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoUSB: sa1111: reorganize ohci-sa1111.c
Russell King [Thu, 26 Jan 2012 10:52:34 +0000 (10:52 +0000)]
USB: sa1111: reorganize ohci-sa1111.c

Combine usb_hcd_sa1111_probe() and ohci_hcd_sa1111_drv_probe(), doing
the same for the remove methods.

Move sa1111_start_hc and sa1111_stop_hc to be located next to these
the probe/release functions, as they're only called from them.

Get rid of the /*----*/ breaker lines.

Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoUSB: sa1111: get rid of nasty printk(KERN_DEBUG "%s: ...", __FILE__)
Russell King [Thu, 26 Jan 2012 10:39:57 +0000 (10:39 +0000)]
USB: sa1111: get rid of nasty printk(KERN_DEBUG "%s: ...", __FILE__)

Use dev_dbg() instead, it's more friendly.

Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoUSB: sa1111: sparse and checkpatch cleanups
Russell King [Thu, 26 Jan 2012 10:37:46 +0000 (10:37 +0000)]
USB: sa1111: sparse and checkpatch cleanups

Clean up the ohci-sa1111 driver formatting to be more compliant with
current standards, and add 'static' to various function definitions
to avoid sparse complaints about undeclared functions.  Remove the
unnecessary local declaration of 'usb_disabled', which can be found
instead in linux/usb.h.

Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: sa11x0: don't static map sa1111
Russell King [Sun, 29 Jan 2012 10:37:36 +0000 (10:37 +0000)]
ARM: sa11x0: don't static map sa1111

The sa1111 support will ioremap() the device; there is no need for
platforms to setup a static mapping for this.  Remove the static
mapping for this device from badge4, jornada720 and neponset.

Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: sa1111: use dev_err() rather than printk()
Russell King [Sun, 29 Jan 2012 10:28:09 +0000 (10:28 +0000)]
ARM: sa1111: use dev_err() rather than printk()

Use dev_err() to report device specific errors rather than printk().

Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: sa1111: cleanup sub-device registration and unregistration
Russell King [Sun, 29 Jan 2012 10:20:00 +0000 (10:20 +0000)]
ARM: sa1111: cleanup sub-device registration and unregistration

Move the releasing of resources out of the release function - this
allows a cleaner and more conventional arrangement of the registration
failure paths and a saner unregistration process for these devices.

Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: sa1111: only setup DMA for DMA capable devices
Russell King [Sun, 29 Jan 2012 10:22:49 +0000 (10:22 +0000)]
ARM: sa1111: only setup DMA for DMA capable devices

It's pointless registering the PS/2 interfaces with the dmabounce code
when there's no DMA support for these in hardware, so only setup the
DMA masks for two subdevices which support DMA - the OHCI and SAC.

Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: sa1111: register sa1111 devices with dmabounce in bus notifier
Russell King [Sun, 29 Jan 2012 09:31:31 +0000 (09:31 +0000)]
ARM: sa1111: register sa1111 devices with dmabounce in bus notifier

Use the bus notifier to register sa1111 devices with dmabounce, rather
than after the device has been registered, potentially racing with
driver binding.

Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: sa1111: move USB interface register definitions to ohci-sa1111.c
Russell King [Mon, 16 Jan 2012 11:37:03 +0000 (11:37 +0000)]
ARM: sa1111: move USB interface register definitions to ohci-sa1111.c

Move the USB interface register definitions into the driver, rather
than keeping them in a common place.

Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: sa1111: move PCMCIA interface register definitions to sa1111_generic.c
Russell King [Mon, 16 Jan 2012 11:32:09 +0000 (11:32 +0000)]
ARM: sa1111: move PCMCIA interface register definitions to sa1111_generic.c

Move the PCMCIA interface register definitions into the driver, rather
than keeping them in a common place.

Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: sa1111: move PS/2 interface register definitions to sa1111p2.c
Russell King [Mon, 16 Jan 2012 11:29:43 +0000 (11:29 +0000)]
ARM: sa1111: move PS/2 interface register definitions to sa1111p2.c

Move the PS/2 interface register definitions into the driver, rather
than keeping them in a common location.

Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: sa1111: delete unused physical GPIO register definitions
Russell King [Mon, 16 Jan 2012 14:28:25 +0000 (14:28 +0000)]
ARM: sa1111: delete unused physical GPIO register definitions

Get rid of the unused GPIO register definitions - we access GPIO
registers through the base + offset method, and having the phys
address definitions is unnecessary duplication.

Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: sa1111: provide a generic way to prevent devices from registering
Russell King [Thu, 26 Jan 2012 13:34:21 +0000 (13:34 +0000)]
ARM: sa1111: provide a generic way to prevent devices from registering

Some platforms don't want certain devices to be registered, because,
eg, the interface is not wired.  Provide a way for platforms to
prevent various devices from being registered via a devid bitmask in
the platform data.

Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoNET: sa11x0-ir: add DMA support for SIR transmit mode
Russell King [Fri, 13 Jan 2012 11:50:03 +0000 (11:50 +0000)]
NET: sa11x0-ir: add DMA support for SIR transmit mode

As the DMA engine API allows DMA channels to be reconfigured on the
fly, we can now support switching the DMA channel configuration to
support SIR transmit DMA without needing to claim an additional
physical DMA channel - thereby using up half the DMA channels just
for one driver.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoNET: sa11x0-ir: convert sa11x0-ir driver to use DMA engine API
Russell King [Fri, 13 Jan 2012 11:48:13 +0000 (11:48 +0000)]
NET: sa11x0-ir: convert sa11x0-ir driver to use DMA engine API

Convert the sa11x0 IrDA driver to use the sa11x0 DMA engine driver
rather than our own platform specific DMA API.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoMerge branch 'sa11x0-dma' into sa11x0-ir
Russell King [Wed, 7 Mar 2012 11:46:12 +0000 (11:46 +0000)]
Merge branch 'sa11x0-dma' into sa11x0-ir

10 years agoARM: sa11x0: add SA-11x0 DMA device
Russell King [Mon, 9 Jan 2012 21:45:51 +0000 (21:45 +0000)]
ARM: sa11x0: add SA-11x0 DMA device

Add sa11x0 DMA platform device and resources to the list of
generic platform devices for SA11x0 machines.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoDMA: sa11x0: add SA-11x0 DMA driver
Russell King [Mon, 9 Jan 2012 21:44:07 +0000 (21:44 +0000)]
DMA: sa11x0: add SA-11x0 DMA driver

Add support for the SA-11x0 DMA driver, which replaces the private
API version in arch/arm/mach-sa1100/dma.c.

We model this as a set of virtual DMA channels, one for each request
signal, and assign the virtual DMA channel to a physical DMA channel
when there is work to be done.  This allows DMA users to claim their
channels, and hold them while not in use, without affecting the
availability of the physical channels.

Another advantage over this approach, compared to the private version,
is that a channel can be reconfigured on the fly without having to
release and re-request it - which for the IrDA driver, allows us to
use DMA for SIR mode transmit without eating up three physical
channels.  As IrDA is half-duplex, we actually only need one physical
channel, and this architecture allows us to achieve that.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoNET: sa11x0-ir: split si->dev for IrDA transmit and receive buffers
Russell King [Thu, 12 Jan 2012 13:56:28 +0000 (13:56 +0000)]
NET: sa11x0-ir: split si->dev for IrDA transmit and receive buffers

The sa11x0-ir device is not the device which is doing the DMA, the
DMA is being performed by a separate DMA engine.  Split the struct
device associated with each DMA channel from the main struct device,
but for the time being initialize it from the main struct device.

This is another preparatory step to converting this driver to use the
DMA engine API.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoNET: sa11x0-ir: fix size of SIR transmit buffer
Russell King [Thu, 12 Jan 2012 13:51:10 +0000 (13:51 +0000)]
NET: sa11x0-ir: fix size of SIR transmit buffer

The SIR transmit buffer was being allocated as 4000 bytes.  IrDA now
has constants for the buffer sizes, and defines the maximum wrapped
SIR packet to be 4269 bytes as indicated by IRDA_SIR_MAX_FRAME.  Use
this definition to allocate the transmit buffer instead.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoNET: sa11x0-ir: convert to use scatterlist DMA API
Russell King [Thu, 12 Jan 2012 12:45:00 +0000 (12:45 +0000)]
NET: sa11x0-ir: convert to use scatterlist DMA API

Convert the sa11x0 IrDA driver to use the scatterlist DMA API.  This
is a preparatory patch for converting the driver to use the DMA engine
API, which requires a struct scatterlist for every transfer.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoNET: sa11x0-ir: get rid of si->hscr0
Russell King [Sun, 8 Jan 2012 20:49:28 +0000 (20:49 +0000)]
NET: sa11x0-ir: get rid of si->hscr0

si->hscr0 is initialized to zero, and never changed.  Get rid of this
redundant variable.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoNET: sa11x0-ir: move sa1100_irda_txdma_irq
Russell King [Sun, 8 Jan 2012 17:48:02 +0000 (17:48 +0000)]
NET: sa11x0-ir: move sa1100_irda_txdma_irq

Move the FIR DMA transmit completion function along-side the other FIR
protocol functions.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoNET: sa11x0-ir: move SIR and FIR interrupt support
Russell King [Sun, 8 Jan 2012 17:10:01 +0000 (17:10 +0000)]
NET: sa11x0-ir: move SIR and FIR interrupt support

Move the interrupt handlers to the SIR and FIR sections of the file.
This improves the localization of the protocol handlers.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoNET: sa11x0-ir: indirect handling of SIR and FIR interrupts
Russell King [Sun, 8 Jan 2012 16:26:15 +0000 (16:26 +0000)]
NET: sa11x0-ir: indirect handling of SIR and FIR interrupts

Use the same method for doing this as we do for the tx_start functions.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoNET: sa11x0-ir: split SIR and FIR tx functions
Russell King [Sun, 8 Jan 2012 16:16:39 +0000 (16:16 +0000)]
NET: sa11x0-ir: split SIR and FIR tx functions

Split the SIR and FIR transmit functions, as they behave differently.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoNET: sa11x0-ir: factor out speed checks
Russell King [Sun, 8 Jan 2012 16:30:44 +0000 (16:30 +0000)]
NET: sa11x0-ir: factor out speed checks

Whenever we complete a transmit, we always check for a speed change.
This check was open coded in several places.  Provide a helper
function to do this instead.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoNET: sa11x0-ir: move sa1100_irda_{startup,shutdown,suspend,resume}
Russell King [Sun, 8 Jan 2012 16:40:07 +0000 (16:40 +0000)]
NET: sa11x0-ir: move sa1100_irda_{startup,shutdown,suspend,resume}

Places these functions in better locations in the file, near where
they are used.  This saves some tiresome paging up/down.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoNET: sa11x0-ir: fix leak of tx skb
Russell King [Sun, 8 Jan 2012 15:38:15 +0000 (15:38 +0000)]
NET: sa11x0-ir: fix leak of tx skb

Ensure that we unmap and free a pending transmit skb when the interface
is stopped.  We rearrange the code a little bit to give all places a
similar layout when freeing the skb in both the completion and interface
stop paths - this gives some consistency to the code.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoNET: sa11x0-ir: containerize DMA data
Russell King [Sun, 8 Jan 2012 12:53:22 +0000 (12:53 +0000)]
NET: sa11x0-ir: containerize DMA data

Both the transmit and receive DMA store identical data: the skb, dma
address, and the dma registers.  Move this data into its own data
structure.  The following replacements were used:

rxskb -> dma_rx.skb
rxbuf_dma -> dma_rx.dma
rxdma -> dma_rx.regs

txskb -> dma_tx.skb
txbuf_dma -> dma_tx.dma
txdma -> dma_tx.regs

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoNET: sa11x0-ir: obtain interrupt number from platform resources
Russell King [Sun, 8 Jan 2012 12:02:17 +0000 (12:02 +0000)]
NET: sa11x0-ir: obtain interrupt number from platform resources

Convert the sa11x0-ir driver to obtain its interrupt number from the
platform device resources, rather than via the asm/irq.h include.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoNET: sa11x0-ir: set netdev's parent struct device
Russell King [Sun, 8 Jan 2012 12:07:24 +0000 (12:07 +0000)]
NET: sa11x0-ir: set netdev's parent struct device

Add the missing SET_NETDEV_DEV() call to set the parent device
correctly for this network interface.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoNET: sa11x0-ir: handle DMA mapping errors properly
Russell King [Sun, 8 Jan 2012 13:55:23 +0000 (13:55 +0000)]
NET: sa11x0-ir: handle DMA mapping errors properly

Handle DMA mapping errors in the rx skb allocation and tx paths.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoNET: sa11x0-ir: fix documentation bug
Russell King [Sun, 8 Jan 2012 12:04:05 +0000 (12:04 +0000)]
NET: sa11x0-ir: fix documentation bug

Spell the module parameter correctly in comments.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: sa1111: change devid to be a bitmask
Russell King [Wed, 25 Jan 2012 10:42:52 +0000 (10:42 +0000)]
ARM: sa1111: change devid to be a bitmask

Change the sa1111 device id to be a bitmask.  This allows us to
specify the actual device, while allowing a single driver to bind
to both PS2 devices.

Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: sa11x0: badge4: move board specific ohci initialization to badge4.c
Russell King [Thu, 26 Jan 2012 13:28:35 +0000 (13:28 +0000)]
ARM: sa11x0: badge4: move board specific ohci initialization to badge4.c

Move the handling of the 5v supply into badge4.c, removing this board
specific detail from the sa1111 ohci driver.

Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: sa1111: add platform enable/disable functions
Russell King [Thu, 26 Jan 2012 13:25:47 +0000 (13:25 +0000)]
ARM: sa1111: add platform enable/disable functions

Add platform hooks to be called when individual sa1111 devices are
enabled and disabled.  This will allow us to move some platform
specifics out of the individual drivers.

Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: sa1111: add shutdown hook to sa1111_driver structure
Russell King [Thu, 26 Jan 2012 11:01:18 +0000 (11:01 +0000)]
ARM: sa1111: add shutdown hook to sa1111_driver structure

Add a shutdown hook to the sa1111_driver structure to allow drivers
to be notified of system reboots and shutdowns.

Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: sa1111: implement support for sparse IRQs
Russell King [Tue, 24 Jan 2012 21:25:20 +0000 (21:25 +0000)]
ARM: sa1111: implement support for sparse IRQs

Implement the necessary allocation/freeing functionality to support
sparse IRQs with the SA-1111 device.  On non-sparse IRQ platforms,
this allows us to dynamically allocate from within the available IRQ
number space.

Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: sa1111: finish "allow cascaded IRQs to be used by platforms"
Russell King [Mon, 16 Jan 2012 00:09:22 +0000 (00:09 +0000)]
ARM: sa1111: finish "allow cascaded IRQs to be used by platforms"

Commit 19851c58e680 (sa1111: allow cascaded IRQs to be used by platforms)
moved the IRQ definitions to the .c file, and added an irq_base member
to the private data structure.

The inerrupt demultiplexer uses irq_base, but the interrupt setup code
does not.  Also, although the commit adds a private data structure to
pass this data, it isn't even referenced, resulting in irq_base being
zero.

We also copied the IRQ numbers from the device info array into the actual
devices, resulting in wrong interrupt numbers passed to the sub-devices.

The net effect of this is that we always overwrite IRQs 0-54, even if
they are allocated elsewhere in the system.

Add the code necessary to setup the private irq_base, and use it in the
IRQ setup code.  Make the SA-1111 probe fail with -EINVAL if there is no
platform data provided.

Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: sa1111: add .owner initializer to sa1111 driver structures
Russell King [Thu, 26 Jan 2012 11:19:48 +0000 (11:19 +0000)]
ARM: sa1111: add .owner initializer to sa1111 driver structures

Add a .owner initializer to the sa1111 driver structures to allow
allow the modules to be associated with their driver structures.

Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: sa1111: add sa1111 core driver .owner initializer
Russell King [Sat, 14 Jan 2012 16:09:22 +0000 (16:09 +0000)]
ARM: sa1111: add sa1111 core driver .owner initializer

Add an initializer for the struct device_driver .owner member.

Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: sa1111: fix PWM state on suspend
Russell King [Fri, 3 Feb 2012 19:05:13 +0000 (19:05 +0000)]
ARM: sa1111: fix PWM state on suspend

We should not write to the SA1111 registers after setting the SLEEP
bit.  Moreover, the manual says that the PWM registers should be
disabled before we enter sleep.  So, move the clearing of these
registers earlier in the suspend sequence.

Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: sa1111: fix memory request/grant setup on PM events
Russell King [Fri, 3 Feb 2012 19:03:31 +0000 (19:03 +0000)]
ARM: sa1111: fix memory request/grant setup on PM events

We weren't re-enabling the memory request/grant signals on resume,
causing DMA devices on the sa1111 to fail.

Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: sa11x0: neponset: don't static map neponset registers
Russell King [Sun, 29 Jan 2012 11:23:33 +0000 (11:23 +0000)]
ARM: sa11x0: neponset: don't static map neponset registers

Now that we ioremap() the neponset register space, there's no need
to static map the neponset registers.  Get rid of this static mapping.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: sa11x0: neponset: move register definitions to neponset.c
Russell King [Sun, 29 Jan 2012 11:19:06 +0000 (11:19 +0000)]
ARM: sa11x0: neponset: move register definitions to neponset.c

Move the board specific neponset register definitions to the board
file, rather than mach/neponset.h.  However, as the NCR_0 register
definitions are used by some drivers, leave these behind.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: sa11x0: assabet/neponest: create neponset device in assabet.c
Russell King [Thu, 26 Jan 2012 11:50:23 +0000 (11:50 +0000)]
ARM: sa11x0: assabet/neponest: create neponset device in assabet.c

The neponset board is a daughter board for the Assabet.  Create the
neponset platform device in assabet.c, where we don't have to wrap
it with machine_is_assabet() stuff.  We also create this device
dynamically rather than keeping it as a static device.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: sa11x0: neponset: suspend/resume in _noirq state
Russell King [Tue, 24 Jan 2012 23:29:47 +0000 (23:29 +0000)]
ARM: sa11x0: neponset: suspend/resume in _noirq state

Suspend and resume in the _noirq state, so that we're saving the
state of the modem control signals as late as possible, and restoring
them as early as possible.  There's nothing to do in thaw/poweroff
methods as we've already saved the necessary state.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: sa11x0: neponset: place smc91x and sa1111 resources in neponset device
Russell King [Tue, 24 Jan 2012 23:17:37 +0000 (23:17 +0000)]
ARM: sa11x0: neponset: place smc91x and sa1111 resources in neponset device

Complete the neponset device resources by covering the children's
memory resources in the parent neponset device.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: sa11x0: neponset: get parent IRQ from neponset device resource
Russell King [Tue, 24 Jan 2012 23:05:08 +0000 (23:05 +0000)]
ARM: sa11x0: neponset: get parent IRQ from neponset device resource

Obtain the parent IRQ from the neponset device resource rather than
hard-coding it into the code.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: sa11x0: neponset: implement support for sparse IRQs
Russell King [Tue, 24 Jan 2012 22:22:18 +0000 (22:22 +0000)]
ARM: sa11x0: neponset: implement support for sparse IRQs

Implement the necessary allocation/freeing functionality to support
sparse IRQs with the Neponset device.  On non-sparse IRQ platforms,
this allows us to dynamically allocate from within the available IRQ
number space.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: sa11x0: neponset: dynamically create neponset child devices
Russell King [Tue, 24 Jan 2012 22:36:47 +0000 (22:36 +0000)]
ARM: sa11x0: neponset: dynamically create neponset child devices

Use platform_device_register_full() to dynamically create the various
neponset child platform devices, and place them below the neponset
device itself to ensure proper PM ordering and device structure.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: sa11x0: neponset: save and restore MDM_CTL_0
Russell King [Tue, 24 Jan 2012 22:10:02 +0000 (22:10 +0000)]
ARM: sa11x0: neponset: save and restore MDM_CTL_0

Save and restore the modem output control register across a suspend/
resume, as well as the NCR register.  Place these in a locally
allocated data structure rather than needing a new static variable.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: sa11x0: neponset: add driver .owner initializer
Russell King [Tue, 24 Jan 2012 23:33:28 +0000 (23:33 +0000)]
ARM: sa11x0: neponset: add driver .owner initializer

Ensure that the driver .owner field is properly initialized.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: sa11x0: neponset: shuffle some code around
Russell King [Tue, 24 Jan 2012 22:13:00 +0000 (22:13 +0000)]
ARM: sa11x0: neponset: shuffle some code around

Move the IRQ handler along side the rest of the IRQ code, and rearrange
the include files.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: sa11x0: neponset: provide function to manipulate NCR_0
Russell King [Mon, 16 Jan 2012 09:31:47 +0000 (09:31 +0000)]
ARM: sa11x0: neponset: provide function to manipulate NCR_0

Rather than having direct register accesses to NCR_0 scattered amongst
the code, provide a function instead.  This contains the necessary
race protection for this platform, ensuring that updates to this
register are safe.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: sa11x0: neponset: fix interrupt setup
Russell King [Mon, 16 Jan 2012 00:17:41 +0000 (00:17 +0000)]
ARM: sa11x0: neponset: fix interrupt setup

Since ARM was converted to genirq, the neponset IRQ implementation has
gradually broken as a result of various subtle changes being introduced
into genirq.

It used to be that simple IRQs did not need an IRQ chip.  This is no
longer the case, and genirq barfs in irq_set_handler().  Fix this by
introducing a dummy no-op chip, and registering it along with the flow
handler.

Neponset IRQs really don't have any masking ability - all we have is a
status register to allow us to decode the source, and a three input OR
gate inside a CPLD.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: sa11x0: assabet: ensure that GPIO27 is driven
Russell King [Tue, 24 Jan 2012 09:25:57 +0000 (09:25 +0000)]
ARM: sa11x0: assabet: ensure that GPIO27 is driven

GPIO27 is just connected to a CPLD input without any pull-ups or pull-
downs.  If GPIO27 is left as an input, it will float around mid-supply,
which for CMOS inputs is the worst place for a pin to be.  Ensure that
this pin is driven.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: sa11x0: assabet: avoid glitching GPIOs when setting outputs
Russell King [Tue, 24 Jan 2012 09:23:19 +0000 (09:23 +0000)]
ARM: sa11x0: assabet: avoid glitching GPIOs when setting outputs

Avoid glitching the GPIO signals during initialization, which can
have undesirable effects.  Ensure that the desired pin state is set
before we change the GPIO pin direction to be an output.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: sa11x0: assabet: deassert QMUTE to codec while codec is unpowered
Russell King [Sat, 21 Jan 2012 21:17:06 +0000 (21:17 +0000)]
ARM: sa11x0: assabet: deassert QMUTE to codec while codec is unpowered

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: sa11x0: convert to use DEFINE_RES_xxx macros
Russell King [Thu, 12 Jan 2012 10:25:29 +0000 (10:25 +0000)]
ARM: sa11x0: convert to use DEFINE_RES_xxx macros

Convert StrongARM-11x0 platforms and core SoC code to use the
DEFINE_RES_xxx macros.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: sa11x0: fix section mismatch warnings
Russell King [Fri, 3 Feb 2012 18:16:45 +0000 (18:16 +0000)]
ARM: sa11x0: fix section mismatch warnings

Neponset calls sa1110_mb_disable() from __devinit code, but
sa1110_mb_disable() is marked __init, and so causes a section
mismatch warning.

As sa1110_mb_enable() and sa1110_mb_disable() need to be callable
from suspend/resume paths as well, they must not be marked __init
or __devinit.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: sa11x0: fix sleep entry
Russell King [Mon, 23 Jan 2012 18:39:21 +0000 (18:39 +0000)]
ARM: sa11x0: fix sleep entry

Sometimes, we get stuck while trying to enter sleep.  This seems
to occur if we do not have udelay() in the instruction cache. Avoid
this by requesting a short delay prior to modifying the SDRAM timings.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: sa11x0: fix off-by-one resource sizes
Russell King [Thu, 12 Jan 2012 10:59:21 +0000 (10:59 +0000)]
ARM: sa11x0: fix off-by-one resource sizes

Hackkit defined its flash memory resource to be 32M + 1 byte.
Jornada defined the Epson video controller resources to be one byte
larger than they should be, and mis-mapped the SA-1111 companion
chip one byte smaller than it should be.

Fix these.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoLinux 3.3-rc3
Linus Torvalds [Thu, 9 Feb 2012 03:21:53 +0000 (19:21 -0800)]
Linux 3.3-rc3

10 years agoMerge branch 'iommu/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/joro...
Linus Torvalds [Thu, 9 Feb 2012 03:11:00 +0000 (19:11 -0800)]
Merge branch 'iommu/fixes' of git://git./linux/kernel/git/joro/iommu

One patch fixes an bug in the ARM/MSM IOMMU code which returned sucess
in the unmap function even when an error occured and the other patch
adds a workaround into the AMD IOMMU driver to better handle broken IVRS
ACPI tables (this patch fixes the case when a device is not listed in
the table but actually translated by the iommu).

* 'iommu/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/msm: Fix error handling in msm_iommu_unmap()
  iommu/amd: Work around broken IVRS tables

10 years agoMerge branch '3.3-rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nab...
Linus Torvalds [Thu, 9 Feb 2012 03:09:25 +0000 (19:09 -0800)]
Merge branch '3.3-rc-fixes' of git://git./linux/kernel/git/nab/target-pending

This series contains pending target bug-fixes and cleanups for v3.3-rc3
that have been addressed the past weeks in lio-core.git.

Some of the highlights include:

 - Fix handling for control CDBs with data greater than PAGE_SIZE (andy)
 - Use IP_FREEBIND for iscsi-target to address network portal creation
   issues with systemd (dax)
 - Allow PERSISTENT RESERVE IN for non-reservation holder (marco)
 - Fix iblock se_dev_attrib.unmap_granularity (marco)
 - Fix unsupported WRITE_SAME sense payload handling (martin)
 - Add workaround for zero-length control CDB handling (nab)
 - Fix discovery with INADDR_ANY and IN6ADDR_ANY_INIT (nab)
 - Fix target_submit_cmd() exception handling (nab)
 - Return correct ASC for unimplemented VPD pages (roland)
 - Don't zero pages used for data buffers (roland)
 - Fix return code of core_tpg_.*_lun (sebastian)

* '3.3-rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (26 commits)
  target: Fix unsupported WRITE_SAME sense payload
  iscsi: use IP_FREEBIND socket option
  iblock: fix handling of large requests
  target: handle empty string writes in sysfs
  iscsi_target: in_aton needs linux/inet.h
  target: Fix iblock se_dev_attrib.unmap_granularity
  target: Fix target_submit_cmd() exception handling
  target: Change target_submit_cmd() to return void
  target: accept REQUEST_SENSE with 18bytes
  target: Fail INQUIRY commands with EVPD==0 but PAGE CODE!=0
  target: Return correct ASC for unimplemented VPD pages
  iscsi-target: Fix discovery with INADDR_ANY and IN6ADDR_ANY_INIT
  target: Allow control CDBs with data > 1 page
  iscsi-target: Fix up a few assignments
  iscsi-target: make one-bit bitfields unsigned
  iscsi-target: Fix double list_add with iscsit_alloc_buffs reject
  iscsi-target: Fix reject release handling in iscsit_free_cmd()
  target: fix return code of core_tpg_.*_lun
  target: use save/restore lock primitive in core_dec_lacl_count()
  target: avoid multiple outputs in scsi_dump_inquiry()
  ...

10 years agoMerge tag 'md-3.3-fixes' of git://neil.brown.name/md
Linus Torvalds [Thu, 9 Feb 2012 03:06:30 +0000 (19:06 -0800)]
Merge tag 'md-3.3-fixes' of git://neil.brown.name/md

Some simple md-related fixes.

1/ two small fixes to ensure we handle an interrupted resync properly.
2/ avoid loading the bitmap multiple times in dm-raid

* tag 'md-3.3-fixes' of git://neil.brown.name/md:
  md: two small fixes to handling interrupt resync.
  Prevent DM RAID from loading bitmap twice.

10 years agoMerge tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6
Linus Torvalds [Thu, 9 Feb 2012 03:05:47 +0000 (19:05 -0800)]
Merge tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6

SPI bug fixes for v3.3-rc2

Minor SPI device driver changes.  A rename of the pch_spi_pcidev symbol
that merely eliminates a modpost warning, and a Kconfig change to allow
the Samsung spi driver to build on EXYNOS.

* tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6:
  spi-topcliff-pch: rename pch_spi_pcidev to pch_spi_pcidev_driver
  spi: Add spi-s3c64xx driver dependency on ARCH_EXYNOS4

10 years agoMerge branch 'akpm' (Andrew's tree)
Linus Torvalds [Thu, 9 Feb 2012 03:04:47 +0000 (19:04 -0800)]
Merge branch 'akpm' (Andrew's tree)

Five fixes

* branch 'akpm':
  pcmcia: fix socket refcount decrementing on each resume
  mm: fix UP THP spin_is_locked BUGs
  drivers/leds/leds-lm3530.c: fix setting pltfm->als_vmax
  mm: compaction: check for overlapping nodes during isolation for migration
  nilfs2: avoid overflowing segment numbers in nilfs_ioctl_clean_segments()

10 years agopcmcia: fix socket refcount decrementing on each resume
Russell King [Thu, 9 Feb 2012 01:13:41 +0000 (17:13 -0800)]
pcmcia: fix socket refcount decrementing on each resume

This fixes a memory-corrupting bug: not only does it cause the warning,
but as a result of dropping the refcount to zero, it causes the
pcmcia_socket0 device structure to be freed while it still has
references, causing slab caches corruption.  A fatal oops quickly
follows this warning - often even just a 'dmesg' following the warning
causes the kernel to oops.

While testing suspend/resume on an ARM device with PCMCIA support, and a
CF card inserted, I found that after five suspend and resumes, the
kernel would complain, and shortly die after with slab corruption.

  WARNING: at include/linux/kref.h:41 kobject_get+0x28/0x50()

As the message doesn't give a clue about which kobject, and the built-in
debugging in drivers/base/power/main.c happens too late, this was added
right before each get_device():

  printk("%s: %p [%s] %u\n", __func__, dev, kobject_name(&dev->kobj), atomic_read(&dev->kobj.kref.refcount));

and on the 3rd s2ram cycle, the following behaviour observed:

On the 3rd suspend/resume cycle:

  dpm_prepare: c1a0d998 [pcmcia_socket0] 3
  dpm_suspend: c1a0d998 [pcmcia_socket0] 3
  dpm_suspend_noirq: c1a0d998 [pcmcia_socket0] 3
  dpm_resume_noirq: c1a0d998 [pcmcia_socket0] 3
  dpm_resume: c1a0d998 [pcmcia_socket0] 3
  dpm_complete: c1a0d998 [pcmcia_socket0] 2

4th:

  dpm_prepare: c1a0d998 [pcmcia_socket0] 2
  dpm_suspend: c1a0d998 [pcmcia_socket0] 2
  dpm_suspend_noirq: c1a0d998 [pcmcia_socket0] 2
  dpm_resume_noirq: c1a0d998 [pcmcia_socket0] 2
  dpm_resume: c1a0d998 [pcmcia_socket0] 2
  dpm_complete: c1a0d998 [pcmcia_socket0] 1

5th:

  dpm_prepare: c1a0d998 [pcmcia_socket0] 1
  dpm_suspend: c1a0d998 [pcmcia_socket0] 1
  dpm_suspend_noirq: c1a0d998 [pcmcia_socket0] 1
  dpm_resume_noirq: c1a0d998 [pcmcia_socket0] 1
  dpm_resume: c1a0d998 [pcmcia_socket0] 1
  dpm_complete: c1a0d998 [pcmcia_socket0] 0
  ------------[ cut here ]------------
  WARNING: at include/linux/kref.h:41 kobject_get+0x28/0x50()
  Modules linked in: ucb1x00_core
  Backtrace:
  [<c0212090>] (dump_backtrace+0x0/0x110) from [<c04799dc>] (dump_stack+0x18/0x1c)
  [<c04799c4>] (dump_stack+0x0/0x1c) from [<c021cba0>] (warn_slowpath_common+0x50/0x68)
  [<c021cb50>] (warn_slowpath_common+0x0/0x68) from [<c021cbdc>] (warn_slowpath_null+0x24/0x28)
  [<c021cbb8>] (warn_slowpath_null+0x0/0x28) from [<c0335374>] (kobject_get+0x28/0x50)
  [<c033534c>] (kobject_get+0x0/0x50) from [<c03804f4>] (get_device+0x1c/0x24)
  [<c0388c90>] (dpm_complete+0x0/0x1a0) from [<c0389cc0>] (dpm_resume_end+0x1c/0x20)
  ...

Looking at commit 7b24e7988263 ("pcmcia: split up central event handler"),
the following change was made to cs.c:

                return 0;
        }
 #endif
-
-       send_event(skt, CS_EVENT_PM_RESUME, CS_EVENT_PRI_LOW);
+       if (!(skt->state & SOCKET_CARDBUS) && (skt->callback))
+               skt->callback->early_resume(skt);
        return 0;
 }

And the corresponding change in ds.c is from:

-static int ds_event(struct pcmcia_socket *skt, event_t event, int priority)
-{
-       struct pcmcia_socket *s = pcmcia_get_socket(skt);
...
-       switch (event) {
...
-       case CS_EVENT_PM_RESUME:
-               if (verify_cis_cache(skt) != 0) {
-                       dev_dbg(&skt->dev, "cis mismatch - different card\n");
-                       /* first, remove the card */
-                       ds_event(skt, CS_EVENT_CARD_REMOVAL, CS_EVENT_PRI_HIGH);
-                       mutex_lock(&s->ops_mutex);
-                       destroy_cis_cache(skt);
-                       kfree(skt->fake_cis);
-                       skt->fake_cis = NULL;
-                       s->functions = 0;
-                       mutex_unlock(&s->ops_mutex);
-                       /* now, add the new card */
-                       ds_event(skt, CS_EVENT_CARD_INSERTION,
-                                CS_EVENT_PRI_LOW);
-               }
-               break;
...
-    }

-    pcmcia_put_socket(s);

-    return 0;
-} /* ds_event */

to:

+static int pcmcia_bus_early_resume(struct pcmcia_socket *skt)
+{
+       if (!verify_cis_cache(skt)) {
+               pcmcia_put_socket(skt);
+               return 0;
+       }

+       dev_dbg(&skt->dev, "cis mismatch - different card\n");

+       /* first, remove the card */
+       pcmcia_bus_remove(skt);
+       mutex_lock(&skt->ops_mutex);
+       destroy_cis_cache(skt);
+       kfree(skt->fake_cis);
+       skt->fake_cis = NULL;
+       skt->functions = 0;
+       mutex_unlock(&skt->ops_mutex);

+       /* now, add the new card */
+       pcmcia_bus_add(skt);
+       return 0;
+}

As can be seen, the original function called pcmcia_get_socket() and
pcmcia_put_socket() around the guts, whereas the replacement code
calls pcmcia_put_socket() only in one path.  This creates an imbalance
in the refcounting.

Testing with pcmcia_put_socket() put removed shows that the bug is gone:

  dpm_suspend: c1a10998 [pcmcia_socket0] 5
  dpm_suspend_noirq: c1a10998 [pcmcia_socket0] 5
  dpm_resume_noirq: c1a10998 [pcmcia_socket0] 5
  dpm_resume: c1a10998 [pcmcia_socket0] 5
  dpm_complete: c1a10998 [pcmcia_socket0] 5

Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agomm: fix UP THP spin_is_locked BUGs
Hugh Dickins [Thu, 9 Feb 2012 01:13:40 +0000 (17:13 -0800)]
mm: fix UP THP spin_is_locked BUGs

Fix CONFIG_TRANSPARENT_HUGEPAGE=y CONFIG_SMP=n CONFIG_DEBUG_VM=y
CONFIG_DEBUG_SPINLOCK=n kernel: spin_is_locked() is then always false,
and so triggers some BUGs in Transparent HugePage codepaths.

asm-generic/bug.h mentions this problem, and provides a WARN_ON_SMP(x);
but being too lazy to add VM_BUG_ON_SMP, BUG_ON_SMP, WARN_ON_SMP_ONCE,
VM_WARN_ON_SMP_ONCE, just test NR_CPUS != 1 in the existing VM_BUG_ONs.

Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agodrivers/leds/leds-lm3530.c: fix setting pltfm->als_vmax
Axel Lin [Thu, 9 Feb 2012 01:13:39 +0000 (17:13 -0800)]
drivers/leds/leds-lm3530.c: fix setting pltfm->als_vmax

In current code, pltfm->als_vmin is set to LM3530_ALS_WINDOW_mV and
pltfm->als_vmax is 0.  This does not make sense.  I think what we want
here is setting pltfm->als_vmax to LM3530_ALS_WINDOW_mV.

Both als_vmin and als_vmax local variables will be set to
pltfm->als_vmin and pltfm->als_vmax by a few lines latter.  Thus also
remove a redundant assignment for als_vmin and als_vmax in this patch.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com>
Acked-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Tested-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agomm: compaction: check for overlapping nodes during isolation for migration
Mel Gorman [Thu, 9 Feb 2012 01:13:38 +0000 (17:13 -0800)]
mm: compaction: check for overlapping nodes during isolation for migration

When isolating pages for migration, migration starts at the start of a
zone while the free scanner starts at the end of the zone.  Migration
avoids entering a new zone by never going beyond the free scanned.

Unfortunately, in very rare cases nodes can overlap.  When this happens,
migration isolates pages without the LRU lock held, corrupting lists
which will trigger errors in reclaim or during page free such as in the
following oops

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
  IP: [<ffffffff810f795c>] free_pcppages_bulk+0xcc/0x450
  PGD 1dda554067 PUD 1e1cb58067 PMD 0
  Oops: 0000 [#1] SMP
  CPU 37
  Pid: 17088, comm: memcg_process_s Tainted: G            X
  RIP: free_pcppages_bulk+0xcc/0x450
  Process memcg_process_s (pid: 17088, threadinfo ffff881c2926e000, task ffff881c2926c0c0)
  Call Trace:
    free_hot_cold_page+0x17e/0x1f0
    __pagevec_free+0x90/0xb0
    release_pages+0x22a/0x260
    pagevec_lru_move_fn+0xf3/0x110
    putback_lru_page+0x66/0xe0
    unmap_and_move+0x156/0x180
    migrate_pages+0x9e/0x1b0
    compact_zone+0x1f3/0x2f0
    compact_zone_order+0xa2/0xe0
    try_to_compact_pages+0xdf/0x110
    __alloc_pages_direct_compact+0xee/0x1c0
    __alloc_pages_slowpath+0x370/0x830
    __alloc_pages_nodemask+0x1b1/0x1c0
    alloc_pages_vma+0x9b/0x160
    do_huge_pmd_anonymous_page+0x160/0x270
    do_page_fault+0x207/0x4c0
    page_fault+0x25/0x30

The "X" in the taint flag means that external modules were loaded but but
is unrelated to the bug triggering.  The real problem was because the PFN
layout looks like this

  Zone PFN ranges:
    DMA      0x00000010 -> 0x00001000
    DMA32    0x00001000 -> 0x00100000
    Normal   0x00100000 -> 0x01e80000
  Movable zone start PFN for each node
  early_node_map[14] active PFN ranges
      0: 0x00000010 -> 0x0000009b
      0: 0x00000100 -> 0x0007a1ec
      0: 0x0007a354 -> 0x0007a379
      0: 0x0007f7ff -> 0x0007f800
      0: 0x00100000 -> 0x00680000
      1: 0x00680000 -> 0x00e80000
      0: 0x00e80000 -> 0x01080000
      1: 0x01080000 -> 0x01280000
      0: 0x01280000 -> 0x01480000
      1: 0x01480000 -> 0x01680000
      0: 0x01680000 -> 0x01880000
      1: 0x01880000 -> 0x01a80000
      0: 0x01a80000 -> 0x01c80000
      1: 0x01c80000 -> 0x01e80000

The fix is straight-forward.  isolate_migratepages() has to make a
similar check to isolate_freepage to ensure that it never isolates pages
from a zone it does not hold the LRU lock for.

This was discovered in a 3.0-based kernel but it affects 3.1.x, 3.2.x
and current mainline.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agonilfs2: avoid overflowing segment numbers in nilfs_ioctl_clean_segments()
Xi Wang [Thu, 9 Feb 2012 01:13:37 +0000 (17:13 -0800)]
nilfs2: avoid overflowing segment numbers in nilfs_ioctl_clean_segments()

nsegs is read from userspace.  Limit its value and avoid overflowing nsegs
* sizeof(__u64) in the subsequent call to memdup_user().

This patch complements 481fe17e973fb9 ("nilfs2: potential integer overflow
in nilfs_ioctl_clean_segments()").

Signed-off-by: Xi Wang <xi.wang@gmail.com>
Cc: Haogang Chen <haogangchen@gmail.com>
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agoMerge tag 'sound-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Linus Torvalds [Wed, 8 Feb 2012 22:56:39 +0000 (14:56 -0800)]
Merge tag 'sound-fixes' of git://git./linux/kernel/git/tiwai/sound

sound fixes #2 for 3.3-rc3

A collection of small fixes, mostly for regressions.
In addition, a few ASoC wm8994 updates are included, too.

* tag 'sound-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ASoC: wm8994: Disable line output discharge prior to ramping VMID
  ASoC: wm8994: Fix typo in VMID ramp setting
  ALSA: oxygen, virtuoso: fix exchanged L/R volumes of aux and CD inputs
  ALSA: usb-audio: add Edirol UM-3G support
  ALSA: hda - add support for Uniwill ECS M31EI notebook
  ALSA: hda - Fix error handling in patch_ca0132.c
  ASoC: wm8994: Enabling VMID should take a runtime PM reference
  ALSA: hda/realtek - Fix a wrong condition
  ALSA: emu8000: Remove duplicate linux/moduleparam.h include from emu8000_patch.c
  ALSA: hda/realtek - Add missing Bass and CLFE as vmaster slaves
  ASoC: wm_hubs: Correct line input to line output 2 paths
  ASoC: cs42l73: Fix Output [X|A|V]SP_SCLK Sourcing Mode setting for master mode
  ASoC: wm8962: Fix word length configuration
  ASoC: core: Better support for idle_bias_off suspend ignores
  ASoC: wm8994: Remove ASoC level register cache sync
  ASoC: wm_hubs: Fix routing of input PGAs to line output mixer

10 years agoMerge tag 'asoc-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound...
Takashi Iwai [Wed, 8 Feb 2012 20:29:38 +0000 (21:29 +0100)]
Merge tag 'asoc-3.3' of git://git./linux/kernel/git/broonie/sound into for-linus

A few small WM8994 updates to go on top of the previous lot of things
that were sent.  They collide with some -next work so I'd really like to
get them into 3.3-rc3 if possible to merge back up into the -next code.
All driver specific and unexciting in the grand scheme of things.

10 years agoASoC: wm8994: Disable line output discharge prior to ramping VMID
Mark Brown [Tue, 7 Feb 2012 14:18:29 +0000 (14:18 +0000)]
ASoC: wm8994: Disable line output discharge prior to ramping VMID

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
10 years agoASoC: wm8994: Fix typo in VMID ramp setting
Mark Brown [Tue, 7 Feb 2012 17:24:19 +0000 (17:24 +0000)]
ASoC: wm8994: Fix typo in VMID ramp setting

The VMID ramp rate is supposed to be 0x3, not 11b. Fix that.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org
10 years agoALSA: oxygen, virtuoso: fix exchanged L/R volumes of aux and CD inputs
Clemens Ladisch [Sat, 4 Feb 2012 19:56:47 +0000 (20:56 +0100)]
ALSA: oxygen, virtuoso: fix exchanged L/R volumes of aux and CD inputs

The driver accidentally exchanged the left/right fields for stereo AC'97
mixer registers.  This affected only the aux and CD inputs because the
line input bypasses the AC'97 codec and the mic input is mono; cards
without AC'97 (Xonar DS/DG/HDAV Slim, HG2PCI, HiFier) were not affected.

Reported-and-tested-by: Abby Cedar <abbycedar@yahoo.com.au>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: 2.6.31+ <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
10 years agoALSA: usb-audio: add Edirol UM-3G support
Clemens Ladisch [Sat, 4 Feb 2012 19:51:43 +0000 (20:51 +0100)]
ALSA: usb-audio: add Edirol UM-3G support

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
10 years agoMerge tag 'fbdev-fixes-for-3.3-1' of git://github.com/schandinat/linux-2.6
Linus Torvalds [Tue, 7 Feb 2012 23:54:02 +0000 (15:54 -0800)]
Merge tag 'fbdev-fixes-for-3.3-1' of git://github.com/schandinat/linux-2.6

fbdev fixes for 3.3

It includes:
 - compile fix for fsl-diu-fb
 - fix for a suspend/resume issue in atmel_lcdfb
 - fix for a suspend/resume issue in OMAP
 - workaround for a hardware bug to avoid physical damage in OMAP
 - really trivial dead code removal in intelfb

* tag 'fbdev-fixes-for-3.3-1' of git://github.com/schandinat/linux-2.6:
  atmel_lcdfb: fix usage of CONTRAST_CTR in suspend/resume
  intelfb: remove some dead code
  drivers/video: compile fixes for fsl-diu-fb.c
  OMAPDSS: HDMI: PHY burnout fix
  OMAP: 4430SDP/Panda: add HDMI HPD gpio
  OMAP: 4430SDP/Panda: setup HDMI GPIO muxes
  OMAPDSS: remove wrong HDMI HPD muxing
  OMAP: 4430SDP/Panda: rename HPD GPIO to CT_CP_HPD
  OMAP: 4430SDP/Panda: use gpio_free_array to free HDMI gpios
  OMAPDSS: use sync versions of pm_runtime_put

10 years agocheckpatch: Warn on code with 6+ tab indentation
Joe Perches [Fri, 3 Feb 2012 23:20:39 +0000 (15:20 -0800)]
checkpatch: Warn on code with 6+ tab indentation

Overly indented code should be refactored.

Suggest refactoring excessive indentation of of
if/else/for/do/while/switch statements.

For example:

$ cat t.c
#include <stdio.h>
#include <stdlib.h>

int main(int argc, char **argv)
{

if (1)
if (2)
if (3)
if (4)
if (5)
if (6)
if (7)
if (8)
;
return 0;
}

$ ./scripts/checkpatch.pl -f t.c
WARNING: Too many leading tabs - consider code refactoring
#12: FILE: t.c:12:
+ if (6)

WARNING: Too many leading tabs - consider code refactoring
#13: FILE: t.c:13:
+ if (7)

WARNING: Too many leading tabs - consider code refactoring
#14: FILE: t.c:14:
+ if (8)

total: 0 errors, 3 warnings, 17 lines checked

t.c has style problems, please review.

If any of these errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agoMerge tag 'ib-srpt-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/roland...
Linus Torvalds [Tue, 7 Feb 2012 22:35:19 +0000 (14:35 -0800)]
Merge tag 'ib-srpt-fixes' of git://git./linux/kernel/git/roland/infiniband

Cleanups and error path fixes for the new SRP (SCSI RDMA protocol) target.

* tag 'ib-srpt-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB/srpt: Don't return freed pointer from srpt_alloc_ioctx_ring()
  IB/srpt: Fix ERR_PTR() vs. NULL checking confusion
  IB/srpt: Remove unneeded <linux/version.h> include
  IB/srpt: Use ARRAY_SIZE() instead of open-coding
  IB/srpt: Use DEFINE_SPINLOCK()/LIST_HEAD()

10 years agoMerge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Linus Torvalds [Tue, 7 Feb 2012 22:32:24 +0000 (14:32 -0800)]
Merge tag 'for-linus' of git://git./linux/kernel/git/mst/vhost

arch: fix ioport mapping on mips,sh

Kevin Cernekee reported that recent cleanup that replaced pci_iomap with
a generic function failed to take into account the differences in io
port handling on mips and sh architectures.

Rather than revert the changes reintroducing the code duplication, this
patchset fixes this by adding ability for architectures to override
ioport mapping for pci devices.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  sh: use the the PCI channels's io_map_base
  mips: use the the PCI controller's io_map_base
  lib: add NO_GENERIC_PCI_IOPORT_MAP

10 years agoACPI: remove duplicated lines of merging problems with acpi_processor_add
Yinghai Lu [Tue, 7 Feb 2012 16:20:37 +0000 (08:20 -0800)]
ACPI: remove duplicated lines of merging problems with acpi_processor_add

Those lines have two copies.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Thomas Renninger <trenn@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agoMerge git://git.samba.org/sfrench/cifs-2.6
Linus Torvalds [Tue, 7 Feb 2012 22:07:20 +0000 (14:07 -0800)]
Merge git://git.samba.org/sfrench/cifs-2.6

* git://git.samba.org/sfrench/cifs-2.6:
  cifs: Fix oops in session setup code for null user mounts
  [CIFS] Update cifs Kconfig title to match removal of experimental dependency
  cifs: fix printk format warnings
  cifs: check offset in decode_ntlmssp_challenge()
  cifs: NULL dereference on allocation failure

10 years agoMerge branch 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Linus Torvalds [Tue, 7 Feb 2012 22:06:11 +0000 (14:06 -0800)]
Merge branch 'upstream-fixes' of git://git./linux/kernel/git/jikos/hid

* 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: wiimote: fix invalid power_supply_powers call
  HID: wacom: Fix invalid power_supply_powers calls
  HID: hyperv: Properly disconnect the input device
  HID: usbhid: fix dead lock between open and disconect

10 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6
Linus Torvalds [Tue, 7 Feb 2012 22:05:49 +0000 (14:05 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/sameo/mfd-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6:
  mfd: Avoid twl6040-codec PLL reconfiguration when not needed
  mfd: Store twl6040-codec mclk configuration

10 years agoALSA: hda - add support for Uniwill ECS M31EI notebook
Jaroslav Kysela [Tue, 7 Feb 2012 13:18:14 +0000 (14:18 +0100)]
ALSA: hda - add support for Uniwill ECS M31EI notebook

This hardware requires same fixup for the node 0x0f like Asus A6Rp.
More information: https://bugzilla.redhat.com/show_bug.cgi?id=785417

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
10 years agoHID: wiimote: fix invalid power_supply_powers call
Jiri Kosina [Tue, 7 Feb 2012 12:40:56 +0000 (13:40 +0100)]
HID: wiimote: fix invalid power_supply_powers call

Analogically to d7cb3dbd1 ("HID: wacom: Fix invalid power_supply_powers
calls"), fix also the same occurence in wiimote driver.

Reported-by: przemo@firszt.eu
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
10 years agoALSA: hda - Fix error handling in patch_ca0132.c
Takashi Iwai [Tue, 7 Feb 2012 10:00:53 +0000 (11:00 +0100)]
ALSA: hda - Fix error handling in patch_ca0132.c

In patch_ca0132.c, the error returned from chipio_write() isn't checked
always.  Also, the power-up/down sequence isn't tracked properly in some
error paths.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
10 years agoMerge tag 'asoc-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound...
Takashi Iwai [Tue, 7 Feb 2012 10:04:48 +0000 (11:04 +0100)]
Merge tag 'asoc-3.3' of git://git./linux/kernel/git/broonie/sound into for-linus

The only particularly remarkable change here is the one for handling of
the Android suspend ignore code for idle_bias_off CODECs.  That one is
actually a regression fix as some of the new power savings that have
been introduced confused the suspend ignore code, making devices that
are active for non-audio reasons look like they are idle causing them to
be suspended instead of being kept active.

10 years agotarget: Fix unsupported WRITE_SAME sense payload
Martin Svec [Tue, 7 Feb 2012 06:13:25 +0000 (22:13 -0800)]
target: Fix unsupported WRITE_SAME sense payload

This patch fixes a bug in target-core where unsupported WRITE_SAME ops
from a target_check_write_same_discard() failure was incorrectly
returning CHECK_CONDITION w/ TCM_INVALID_CDB_FIELD sense data.
This was causing some clients to not properly fall back, so go ahead
and use the correct TCM_UNSUPPORTED_SCSI_OPCODE sense for this case.

Reported-by: Martin Svec <martin.svec@zoner.cz>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
10 years agoiscsi: use IP_FREEBIND socket option
Dax Kelson [Sat, 4 Feb 2012 06:40:25 +0000 (23:40 -0700)]
iscsi: use IP_FREEBIND socket option

Use IP_FREEBIND socket option so that iscsi portal configuration with
explicit IP addresses can happen during boot, before network interfaces
have been assigned IPs.

This is especially important on systemd based Linux boxes where system
boot happens asynchronously and non-trivial configuration must be done
to get targetcli.service to start synchronously after the network is
configured.

Reference:
http://lists.fedoraproject.org/pipermail/devel/2011-October/158025.html

Signed-off-by: Dax Kelson <dkelson@gurulabs.com>
Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org>
Cc: "Andy Grover" <agrover@redhat.com>
Cc: "Lennart Poettering" <lennart@poettering.net>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>