~shefty/rdma-dev.git
8 years agoMerge tag 'for-3.8' of git://openrisc.net/~jonas/linux
Linus Torvalds [Tue, 18 Dec 2012 18:08:47 +0000 (10:08 -0800)]
Merge tag 'for-3.8' of git://openrisc.net/~jonas/linux

Pull OpenRISC update from Jonas Bonn:
 "Trivial cleanups for OpenRISC."

* tag 'for-3.8' of git://openrisc.net/~jonas/linux:
  openrisc: use kbuild.h instead of defining macros in asm-offset.c
  openrisc: Use Kbuild infrastructure for kvm_para.h

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Linus Torvalds [Tue, 18 Dec 2012 18:06:00 +0000 (10:06 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/s390/linux

Pull s390 update #2 from Martin Schwidefsky:
 "The main patch is the function measurement blocks extension for PCI to
  do performance statistics and help with debugging.  The other patch is
  a small cleanup in ccwdev.h."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/ccwdev: Include asm/schid.h.
  s390/pci: performance statistics and debug infrastructure

8 years agoMerge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Linus Torvalds [Tue, 18 Dec 2012 17:58:09 +0000 (09:58 -0800)]
Merge branch 'next' of git://git./linux/kernel/git/benh/powerpc

Pull powerpc update from Benjamin Herrenschmidt:
 "The main highlight is probably some base POWER8 support.  There's more
  to come such as transactional memory support but that will wait for
  the next one.

  Overall it's pretty quiet, or rather I've been pretty poor at picking
  things up from patchwork and reviewing them this time around and Kumar
  no better on the FSL side it seems..."

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (73 commits)
  powerpc+of: Rename and fix OF reconfig notifier error inject module
  powerpc: mpc5200: Add a3m071 board support
  powerpc/512x: don't compile any platform DIU code if the DIU is not enabled
  powerpc/mpc52xx: use module_platform_driver macro
  powerpc+of: Export of_reconfig_notifier_[register,unregister]
  powerpc/dma/raidengine: add raidengine device
  powerpc/iommu/fsl: Add PAMU bypass enable register to ccsr_guts struct
  powerpc/mpc85xx: Change spin table to cached memory
  powerpc/fsl-pci: Add PCI controller ATMU PM support
  powerpc/86xx: fsl_pcibios_fixup_bus requires CONFIG_PCI
  drivers/virt: the Freescale hypervisor driver doesn't need to check MSR[GS]
  powerpc/85xx: p1022ds: Use NULL instead of 0 for pointers
  powerpc: Disable relocation on exceptions when kexecing
  powerpc: Enable relocation on during exceptions at boot
  powerpc: Move get_longbusy_msecs into hvcall.h and remove duplicate function
  powerpc: Add wrappers to enable/disable relocation on exceptions
  powerpc: Add set_mode hcall
  powerpc: Setup relocation on exceptions for bare metal systems
  powerpc: Move initial mfspr LPCR out of __init_LPCR
  powerpc: Add relocation on exception vector handlers
  ...

8 years agox86, paravirt: fix build error when thp is disabled
David Rientjes [Tue, 18 Dec 2012 08:03:23 +0000 (00:03 -0800)]
x86, paravirt: fix build error when thp is disabled

With CONFIG_PARAVIRT=y and CONFIG_TRANSPARENT_HUGEPAGE=n, the build breaks
because set_pmd_at() is undeclared:

  mm/memory.c: In function 'do_pmd_numa_page':
  mm/memory.c:3520: error: implicit declaration of function 'set_pmd_at'
  mm/mprotect.c: In function 'change_pmd_protnuma':
  mm/mprotect.c:120: error: implicit declaration of function 'set_pmd_at'

This is because paravirt defines set_pmd_at() only when
CONFIG_TRANSPARENT_HUGEPAGE=y and such a restriction is unneeded.  The
fix is to define it for all CONFIG_PARAVIRT configurations.

Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoMerge branch 'for-linus' of git://git.open-osd.org/linux-open-osd
Linus Torvalds [Tue, 18 Dec 2012 17:44:44 +0000 (09:44 -0800)]
Merge branch 'for-linus' of git://git.open-osd.org/linux-open-osd

Pull exofs changes from Boaz Harrosh:
 "These are just 3 patches, the last two are bug fixes on the error
  paths in exofs.

  The important patch is the one to osd_uld which adds sysfs info to osd
  devices for use by user-mode clustering discovery software.  I'm
  already sitting on this patch since before February this year, It is
  important for some of the big installation cluster systems, who's been
  compiling their own kernel just for that patch."

Ugh.  The osd_uld patch already went through the SCSI tree, so this was
kind of pointless.  But at least it has the two small error-path fixes..

* 'for-linus' of git://git.open-osd.org/linux-open-osd:
  exofs: don't leak io_state and pages on read error
  exofs: clean up the correct page collection on write error
  osduld: Add osdname & systemid sysfs at scsi_osd class

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux...
Linus Torvalds [Tue, 18 Dec 2012 17:42:05 +0000 (09:42 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/mason/linux-btrfs

Pull btrfs update from Chris Mason:
 "A big set of fixes and features.

  In terms of line count, most of the code comes from Stefan, who added
  the ability to replace a single drive in place.  This is different
  from how btrfs normally replaces drives, and is much much much faster.

  Josef is plowing through our synchronous write performance.  This pull
  request does not include the DIO_OWN_WAITING patch that was discussed
  on the list, but it has a number of other improvements to cut down our
  latencies and CPU time during fsync/O_DIRECT writes.

  Miao Xie has a big series of fixes and is spreading out ordered
  operations over more CPUs.  This improves performance and reduces
  contention.

  I've put in fixes for error handling around hash collisions.  These
  are going back to individual stable kernels as I test against them.

  Otherwise we have a lot of fixes and cleanups, thanks everyone!
  raid5/6 is being rebased against the device replacement code.  I'll
  have it posted this Friday along with a nice series of benchmarks."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (115 commits)
  Btrfs: fix a bug of per-file nocow
  Btrfs: fix hash overflow handling
  Btrfs: don't take inode delalloc mutex if we're a free space inode
  Btrfs: fix autodefrag and umount lockup
  Btrfs: fix permissions of empty files not affected by umask
  Btrfs: put raid properties into global table
  Btrfs: fix BUG() in scrub when first superblock reading gives EIO
  Btrfs: do not call file_update_time in aio_write
  Btrfs: only unlock and relock if we have to
  Btrfs: use tokens where we can in the tree log
  Btrfs: optimize leaf_space_used
  Btrfs: don't memset new tokens
  Btrfs: only clear dirty on the buffer if it is marked as dirty
  Btrfs: move checks in set_page_dirty under DEBUG
  Btrfs: log changed inodes based on the extent map tree
  Btrfs: add path->really_keep_locks
  Btrfs: do not mark ems as prealloc if we are writing to them
  Btrfs: keep track of the extents original block length
  Btrfs: inline csums if we're fsyncing
  Btrfs: don't bother copying if we're only logging the inode
  ...

8 years agoMerge tag 'nfs-for-3.8-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Linus Torvalds [Tue, 18 Dec 2012 17:36:34 +0000 (09:36 -0800)]
Merge tag 'nfs-for-3.8-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs

Pull NFS client updates from Trond Myklebust:
 "Features include:

   - Full audit of BUG_ON asserts in the NFS, SUNRPC and lockd client
     code.  Remove altogether where possible, and replace with
     WARN_ON_ONCE and appropriate error returns where not.
   - NFSv4.1 client adds session dynamic slot table management.  There
     is matching server side code that has been submitted to Bruce for
     consideration.

     Together, this code allows the server to dynamically manage the
     amount of memory it allocates to the duplicate request cache for
     each client.  It will constantly resize those caches to reserve
     more memory for clients that are hot while shrinking caches for
     those that are quiescent.

  In addition, there are assorted bugfixes for the generic NFS write
  code, fixes to deal with the drop_nlink() warnings, and yet another
  fix for NFSv4 getacl."

* tag 'nfs-for-3.8-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (106 commits)
  SUNRPC: continue run over clients list on PipeFS event instead of break
  NFS: Don't use SetPageError in the NFS writeback code
  SUNRPC: variable 'svsk' is unused in function bc_send_request
  SUNRPC: Handle ECONNREFUSED in xs_local_setup_socket
  NFSv4.1: Deal effectively with interrupted RPC calls.
  NFSv4.1: Move the RPC timestamp out of the slot.
  NFSv4.1: Try to deal with NFS4ERR_SEQ_MISORDERED.
  NFS: nfs_lookup_revalidate should not trust an inode with i_nlink == 0
  NFS: Fix calls to drop_nlink()
  NFS: Ensure that we always drop inodes that have been marked as stale
  nfs: Remove unused list nfs4_clientid_list
  nfs: Remove duplicate function declaration in internal.h
  NFS: avoid NULL dereference in nfs_destroy_server
  SUNRPC handle EKEYEXPIRED in call_refreshresult
  SUNRPC set gss gc_expiry to full lifetime
  nfs: fix page dirtying in NFS DIO read codepath
  nfs: don't zero out the rest of the page if we hit the EOF on a DIO READ
  NFSv4.1: Be conservative about the client highest slotid
  NFSv4.1: Handle NFS4ERR_BADSLOT errors correctly
  nfs: don't extend writes to cover entire page if pagecache is invalid
  ...

8 years agoMerge tag 'md-3.8' of git://neil.brown.name/md
Linus Torvalds [Tue, 18 Dec 2012 17:32:44 +0000 (09:32 -0800)]
Merge tag 'md-3.8' of git://neil.brown.name/md

Pull md update from Neil Brown:
 "Mostly just little fixes.  Probably biggest part is AVX accelerated
  RAID6 calculations."

* tag 'md-3.8' of git://neil.brown.name/md:
  md/raid5: add blktrace calls
  md/raid5: use async_tx_quiesce() instead of open-coding it.
  md: Use ->curr_resync as last completed request when cleanly aborting resync.
  lib/raid6: build proper files on corresponding arch
  lib/raid6: Add AVX2 optimized gen_syndrome functions
  lib/raid6: Add AVX2 optimized recovery functions
  md: Update checkpoint of resync/recovery based on time.
  md:Add place to update ->recovery_cp.
  md.c: re-indent various 'switch' statements.
  md: close race between removing and adding a device.
  md: removed unused variable in calc_sb_1_csm.

8 years agoMerge branch 'akpm' (Andrew's patch-bomb)
Linus Torvalds [Tue, 18 Dec 2012 04:58:12 +0000 (20:58 -0800)]
Merge branch 'akpm' (Andrew's patch-bomb)

Merge misc patches from Andrew Morton:
 "Incoming:

   - lots of misc stuff

   - backlight tree updates

   - lib/ updates

   - Oleg's percpu-rwsem changes

   - checkpatch

   - rtc

   - aoe

   - more checkpoint/restart support

  I still have a pile of MM stuff pending - Pekka should be merging
  later today after which that is good to go.  A number of other things
  are twiddling thumbs awaiting maintainer merges."

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (180 commits)
  scatterlist: don't BUG when we can trivially return a proper error.
  docs: update documentation about /proc/<pid>/fdinfo/<fd> fanotify output
  fs, fanotify: add @mflags field to fanotify output
  docs: add documentation about /proc/<pid>/fdinfo/<fd> output
  fs, notify: add procfs fdinfo helper
  fs, exportfs: add exportfs_encode_inode_fh() helper
  fs, exportfs: escape nil dereference if no s_export_op present
  fs, epoll: add procfs fdinfo helper
  fs, eventfd: add procfs fdinfo helper
  procfs: add ability to plug in auxiliary fdinfo providers
  tools/testing/selftests/kcmp/kcmp_test.c: print reason for failure in kcmp_test
  breakpoint selftests: print failure status instead of cause make error
  kcmp selftests: print fail status instead of cause make error
  kcmp selftests: make run_tests fix
  mem-hotplug selftests: print failure status instead of cause make error
  cpu-hotplug selftests: print failure status instead of cause make error
  mqueue selftests: print failure status instead of cause make error
  vm selftests: print failure status instead of cause make error
  ubifs: use prandom_bytes
  mtd: nandsim: use prandom_bytes
  ...

8 years agoefi: Fix the build with user namespaces enabled.
Eric W. Biederman [Tue, 18 Dec 2012 01:19:36 +0000 (17:19 -0800)]
efi: Fix the build with user namespaces enabled.

When compiling efivars.c the build fails with:

   CC      drivers/firmware/efivars.o
  drivers/firmware/efivars.c: In function ‘efivarfs_get_inode’:
  drivers/firmware/efivars.c:886:31: error: incompatible types when assigning to type ‘kgid_t’ from type ‘int’
  make[2]: *** [drivers/firmware/efivars.o] Error 1
  make[1]: *** [drivers/firmware/efivars.o] Error 2

Fix the build error by removing the duplicate initialization of i_uid and
i_gid inode_init_always has already initialized them to 0.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm,numa: fix update_mmu_cache_pmd call
Stephen Rothwell [Mon, 10 Dec 2012 08:50:57 +0000 (19:50 +1100)]
mm,numa: fix update_mmu_cache_pmd call

This build error is currently hidden by the fact that the x86
implementation of 'update_mmu_cache_pmd()' is a macro that doesn't use
its last argument, but commit b32967ff101a ("mm: numa: Add THP migration
for the NUMA working set scanning fault case") introduced a call with
the wrong third argument.

In the akpm tree, it causes this build error:

  mm/migrate.c: In function 'migrate_misplaced_transhuge_page_put':
  mm/migrate.c:1666:2: error: incompatible type for argument 3 of 'update_mmu_cache_pmd'
  arch/x86/include/asm/pgtable.h:792:20: note: expected 'struct pmd_t *' but argument is of type 'pmd_t'

Fix it.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoscatterlist: don't BUG when we can trivially return a proper error.
Nick Bowler [Tue, 18 Dec 2012 00:05:20 +0000 (16:05 -0800)]
scatterlist: don't BUG when we can trivially return a proper error.

There is absolutely no reason to crash the kernel when we have a
perfectly good return value already available to use for conveying
failure status.

Let's return an error code instead of crashing the kernel: that sounds
like a much better plan.

[akpm@linux-foundation.org: s/E2BIG/EINVAL/]
Signed-off-by: Nick Bowler <nbowler@elliptictech.com>
Cc: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agodocs: update documentation about /proc/<pid>/fdinfo/<fd> fanotify output
Cyrill Gorcunov [Tue, 18 Dec 2012 00:05:18 +0000 (16:05 -0800)]
docs: update documentation about /proc/<pid>/fdinfo/<fd> fanotify output

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrey Vagin <avagin@openvz.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: James Bottomley <jbottomley@parallels.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Matthew Helsley <matt.helsley@gmail.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@onelan.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agofs, fanotify: add @mflags field to fanotify output
Cyrill Gorcunov [Tue, 18 Dec 2012 00:05:16 +0000 (16:05 -0800)]
fs, fanotify: add @mflags field to fanotify output

The kernel keeps FAN_MARK_IGNORED_SURV_MODIFY bit separately from
fsnotify_mark::mask|ignored_mask thus put it in @mflags (mark flags)
field so the user-space reader will be able to detect if such bit were
used on mark creation procedure.

 | pos: 0
 | flags: 04002
 | fanotify flags:10 event-flags:0
 | fanotify mnt_id:12 mflags:40 mask:38 ignored_mask:40000003
 | fanotify ino:4f969 sdev:800013 mflags:0 mask:3b ignored_mask:40000000 fhandle-bytes:8 fhandle-type:1 f_handle:69f90400c275b5b4

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrey Vagin <avagin@openvz.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: James Bottomley <jbottomley@parallels.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Matthew Helsley <matt.helsley@gmail.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Tvrtko Ursulin <tvrtko.ursulin@onelan.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agodocs: add documentation about /proc/<pid>/fdinfo/<fd> output
Cyrill Gorcunov [Tue, 18 Dec 2012 00:05:14 +0000 (16:05 -0800)]
docs: add documentation about /proc/<pid>/fdinfo/<fd> output

[akpm@linux-foundation.org: tweak documentation]
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrey Vagin <avagin@openvz.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: James Bottomley <jbottomley@parallels.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Matthew Helsley <matt.helsley@gmail.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@onelan.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agofs, notify: add procfs fdinfo helper
Cyrill Gorcunov [Tue, 18 Dec 2012 00:05:12 +0000 (16:05 -0800)]
fs, notify: add procfs fdinfo helper

This allow us to print out fsnotify details such as watchee inode, device,
mask and optionally a file handle.

For inotify objects if kernel compiled with exportfs support the output
will be

 | pos: 0
 | flags: 02000000
 | inotify wd:3 ino:9e7e sdev:800013 mask:800afce ignored_mask:0 fhandle-bytes:8 fhandle-type:1 f_handle:7e9e0000640d1b6d
 | inotify wd:2 ino:a111 sdev:800013 mask:800afce ignored_mask:0 fhandle-bytes:8 fhandle-type:1 f_handle:11a1000020542153
 | inotify wd:1 ino:6b149 sdev:800013 mask:800afce ignored_mask:0 fhandle-bytes:8 fhandle-type:1 f_handle:49b1060023552153

If kernel compiled without exportfs support, the file handle
won't be provided but inode and device only.

 | pos: 0
 | flags: 02000000
 | inotify wd:3 ino:9e7e sdev:800013 mask:800afce ignored_mask:0
 | inotify wd:2 ino:a111 sdev:800013 mask:800afce ignored_mask:0
 | inotify wd:1 ino:6b149 sdev:800013 mask:800afce ignored_mask:0

For fanotify the output is like

 | pos: 0
 | flags: 04002
 | fanotify flags:10 event-flags:0
 | fanotify mnt_id:12 mask:3b ignored_mask:0
 | fanotify ino:50205 sdev:800013 mask:3b ignored_mask:40000000 fhandle-bytes:8 fhandle-type:1 f_handle:05020500fb1d47e7

To minimize impact on general fsnotify code the new functionality
is gathered in fs/notify/fdinfo.c file.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Acked-by: Pavel Emelyanov <xemul@parallels.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrey Vagin <avagin@openvz.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: James Bottomley <jbottomley@parallels.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Matthew Helsley <matt.helsley@gmail.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@onelan.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agofs, exportfs: add exportfs_encode_inode_fh() helper
Cyrill Gorcunov [Tue, 18 Dec 2012 00:05:08 +0000 (16:05 -0800)]
fs, exportfs: add exportfs_encode_inode_fh() helper

We will need this helper in the next patch to provide a file handle for
inotify marks in /proc/pid/fdinfo output.

The patch is rather providing the way to use inodes directly when dentry
is not available (like in case of inotify system).

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Acked-by: Pavel Emelyanov <xemul@parallels.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrey Vagin <avagin@openvz.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: James Bottomley <jbottomley@parallels.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Matthew Helsley <matt.helsley@gmail.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@onelan.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agofs, exportfs: escape nil dereference if no s_export_op present
Cyrill Gorcunov [Tue, 18 Dec 2012 00:05:06 +0000 (16:05 -0800)]
fs, exportfs: escape nil dereference if no s_export_op present

This routine will be used to generate a file handle in fdinfo output for
inotify subsystem, where if no s_export_op present the general
export_encode_fh should be used.  Thus add a test if s_export_op present
inside exportfs_encode_fh itself.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Acked-by: Pavel Emelyanov <xemul@parallels.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrey Vagin <avagin@openvz.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: James Bottomley <jbottomley@parallels.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Matthew Helsley <matt.helsley@gmail.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@onelan.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agofs, epoll: add procfs fdinfo helper
Cyrill Gorcunov [Tue, 18 Dec 2012 00:05:02 +0000 (16:05 -0800)]
fs, epoll: add procfs fdinfo helper

This allows us to print out eventpoll target file descriptor, events and
data, the /proc/pid/fdinfo/fd consists of

 | pos: 0
 | flags: 02
 | tfd:        5 events:       1d data: ffffffffffffffff enabled: 1

[avagin@: fix for unitialized ret variable]

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Acked-by: Pavel Emelyanov <xemul@parallels.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrey Vagin <avagin@openvz.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: James Bottomley <jbottomley@parallels.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Matthew Helsley <matt.helsley@gmail.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@onelan.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agofs, eventfd: add procfs fdinfo helper
Cyrill Gorcunov [Tue, 18 Dec 2012 00:04:57 +0000 (16:04 -0800)]
fs, eventfd: add procfs fdinfo helper

This allows us to print out raw counter value.  The /proc/pid/fdinfo/fd
output is

 | pos: 0
 | flags: 04002
 | eventfd-count:               5a

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Acked-by: Pavel Emelyanov <xemul@parallels.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrey Vagin <avagin@openvz.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: James Bottomley <jbottomley@parallels.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Matthew Helsley <matt.helsley@gmail.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@onelan.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoprocfs: add ability to plug in auxiliary fdinfo providers
Cyrill Gorcunov [Tue, 18 Dec 2012 00:04:55 +0000 (16:04 -0800)]
procfs: add ability to plug in auxiliary fdinfo providers

This patch brings ability to print out auxiliary data associated with
file in procfs interface /proc/pid/fdinfo/fd.

In particular further patches make eventfd, evenpoll, signalfd and
fsnotify to print additional information complete enough to restore
these objects after checkpoint.

To simplify the code we add show_fdinfo callback inside struct
file_operations (as Al and Pavel are proposing).

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Acked-by: Pavel Emelyanov <xemul@parallels.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrey Vagin <avagin@openvz.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: James Bottomley <jbottomley@parallels.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Matthew Helsley <matt.helsley@gmail.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@onelan.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agotools/testing/selftests/kcmp/kcmp_test.c: print reason for failure in kcmp_test
Dave Jones [Tue, 18 Dec 2012 00:04:52 +0000 (16:04 -0800)]
tools/testing/selftests/kcmp/kcmp_test.c: print reason for failure in kcmp_test

I was curious why sys_kcmp wasn't working, which led me to the testcase.
It turned out I hadn't enabled CHECKPOINT_RESTORE in the kernel I was
testing.  Add a decoding of errno to the testcase to make that obvious.

Signed-off-by: Dave Jones <davej@redhat.com>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agobreakpoint selftests: print failure status instead of cause make error
Dave Young [Tue, 18 Dec 2012 00:04:50 +0000 (16:04 -0800)]
breakpoint selftests: print failure status instead of cause make error

In case breakpoint test exit non zero value it will cause make error.
Better way is just print the test failure status.

Signed-off-by: Dave Young <dyoung@redhat.com>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agokcmp selftests: print fail status instead of cause make error
Dave Young [Tue, 18 Dec 2012 00:04:49 +0000 (16:04 -0800)]
kcmp selftests: print fail status instead of cause make error

In case kcmp_test exit non zero value it will cause make error.
Better way is just print the test failure status.

Signed-off-by: Dave Young <dyoung@redhat.com>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agokcmp selftests: make run_tests fix
Dave Young [Tue, 18 Dec 2012 00:04:47 +0000 (16:04 -0800)]
kcmp selftests: make run_tests fix

make run_tests need the target is run_tests instead of run-tests
Also gcc output should be kcmp_test. Fix these two issues.

Signed-off-by: Dave Young <dyoung@redhat.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomem-hotplug selftests: print failure status instead of cause make error
Dave Young [Tue, 18 Dec 2012 00:04:45 +0000 (16:04 -0800)]
mem-hotplug selftests: print failure status instead of cause make error

Original behavior:
  bash-4.1$ make -C memory-hotplug run_tests
  make: Entering directory `/home/dave/git/linux-2.6/tools/testing/selftests/memory-hotplug'
  ./on-off-test.sh
  make: execvp: ./on-off-test.sh: Permission denied
  make: *** [run_tests] Error 127
  make: Leaving directory `/home/dave/git/linux-2.6/tools/testing/selftests/memory-hotplug'

After applying the patch:
  bash-4.1$ make -C memory-hotplug run_tests
  make: Entering directory `/home/dave/git/linux-2.6/tools/testing/selftests/memory-hotplug'
  /bin/sh: ./on-off-test.sh: Permission denied
  memory-hotplug selftests: [FAIL]
  make: Leaving directory `/home/dave/git/linux-2.6/tools/testing/selftests/memory-hotplug'

Signed-off-by: Dave Young <dyoung@redhat.com>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agocpu-hotplug selftests: print failure status instead of cause make error
Dave Young [Tue, 18 Dec 2012 00:04:42 +0000 (16:04 -0800)]
cpu-hotplug selftests: print failure status instead of cause make error

Original behavior:
  bash-4.1$ make -C cpu-hotplug run_tests
  make: Entering directory `/home/dave/git/linux-2.6/tools/testing/selftests/cpu-hotplug'
  ./on-off-test.sh
  make: execvp: ./on-off-test.sh: Permission denied
  make: *** [run_tests] Error 127
  make: Leaving directory `/home/dave/git/linux-2.6/tools/testing/selftests/cpu-hotplug'

After applying the patch:
  bash-4.1$ make -C cpu-hotplug run_tests
  make: Entering directory `/home/dave/git/linux-2.6/tools/testing/selftests/cpu-hotplug'
  /bin/sh: ./on-off-test.sh: Permission denied
  cpu-hotplug selftests: [FAIL]
  make: Leaving directory `/home/dave/git/linux-2.6/tools/testing/selftests/cpu-hotplug'

Signed-off-by: Dave Young <dyoung@redhat.com>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomqueue selftests: print failure status instead of cause make error
Dave Young [Tue, 18 Dec 2012 00:04:39 +0000 (16:04 -0800)]
mqueue selftests: print failure status instead of cause make error

Original behavior:
  bash-4.1$ make -C mqueue run_tests
  make: Entering directory `/home/dave/git/linux-2.6/tools/testing/selftests/mqueue'
  ./mq_open_tests /test1
  Not running as root, but almost all tests require root in order to modify
  system settings.  Exiting.
  make: *** [run_tests] Error 1
  make: Leaving directory `/home/dave/git/linux-2.6/tools/testing/selftests/mqueue'

After applying the patch:
  bash-4.1$ make -C mqueue run_tests
  make: Entering directory `/home/dave/git/linux-2.6/tools/testing/selftests/mqueue'
  Not running as root, but almost all tests require root in order to modify
  system settings.  Exiting.
  mq_open_tests: [FAIL]
  Not running as root, but almost all tests require root in order to modify
  system settings.  Exiting.
  mq_perf_tests: [FAIL]
  make: Leaving directory `/home/dave/git/linux-2.6/tools/testing/selftests/mqueue'

Signed-off-by: Dave Young <dyoung@redhat.com>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agovm selftests: print failure status instead of cause make error
Dave Young [Tue, 18 Dec 2012 00:04:38 +0000 (16:04 -0800)]
vm selftests: print failure status instead of cause make error

Original behavior:
  bash-4.1$ make -C vm run_tests
  make: Entering directory `/home/dave/git/linux-2.6/tools/testing/selftests/vm'
  /bin/sh ./run_vmtests
  ./run_vmtests: line 24: /proc/sys/vm/nr_hugepages: Permission denied
  Please run this test as root
  make: *** [run_tests] Error 1
  make: Leaving directory `/home/dave/git/linux-2.6/tools/testing/selftests/vm'

After applying the patch:
  bash-4.1$ make -C vm run_tests
  make: Entering directory `/home/dave/git/linux-2.6/tools/testing/selftests/vm'
  ./run_vmtests: line 24: /proc/sys/vm/nr_hugepages: Permission denied
  Please run this test as root
  vmtests: [FAIL]
  make: Leaving directory `/home/dave/git/linux-2.6/tools/testing/selftests/vm'

Signed-off-by: Dave Young <dyoung@redhat.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoubifs: use prandom_bytes
Akinobu Mita [Tue, 18 Dec 2012 00:04:35 +0000 (16:04 -0800)]
ubifs: use prandom_bytes

This also converts filling memory loop to use memset.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Artem Bityutskiy <dedekind1@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: David Laight <david.laight@aculab.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Eilon Greenstein <eilong@broadcom.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Robert Love <robert.w.love@intel.com>
Cc: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomtd: nandsim: use prandom_bytes
Akinobu Mita [Tue, 18 Dec 2012 00:04:32 +0000 (16:04 -0800)]
mtd: nandsim: use prandom_bytes

This also removes unnecessary memset call which is immediately overwritten
with random bytes.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Artem Bityutskiy <dedekind1@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Laight <david.laight@aculab.com>
Cc: Eilon Greenstein <eilong@broadcom.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Robert Love <robert.w.love@intel.com>
Cc: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agobnx2x: use prandom_bytes()
Akinobu Mita [Tue, 18 Dec 2012 00:04:28 +0000 (16:04 -0800)]
bnx2x: use prandom_bytes()

Use prandom_bytes() to fill rss key with pseudo-random bytes.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Eilon Greenstein <eilong@broadcom.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Artem Bityutskiy <dedekind1@gmail.com>
Cc: David Laight <david.laight@aculab.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Michel Lespinasse <walken@google.com>
Cc: Robert Love <robert.w.love@intel.com>
Cc: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoprandom: introduce prandom_bytes() and prandom_bytes_state()
Akinobu Mita [Tue, 18 Dec 2012 00:04:25 +0000 (16:04 -0800)]
prandom: introduce prandom_bytes() and prandom_bytes_state()

Add functions to get the requested number of pseudo-random bytes.

The difference from get_random_bytes() is that it generates pseudo-random
numbers by prandom_u32().  It doesn't consume the entropy pool, and the
sequence is reproducible if the same rnd_state is used.  So it is suitable
for generating random bytes for testing.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Artem Bityutskiy <dedekind1@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Eilon Greenstein <eilong@broadcom.com>
Cc: David Laight <david.laight@aculab.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Robert Love <robert.w.love@intel.com>
Cc: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agorandom32: rename random32 to prandom
Akinobu Mita [Tue, 18 Dec 2012 00:04:23 +0000 (16:04 -0800)]
random32: rename random32 to prandom

This renames all random32 functions to have 'prandom_' prefix as follows:

  void prandom_seed(u32 seed); /* rename from srandom32() */
  u32 prandom_u32(void); /* rename from random32() */
  void prandom_seed_state(struct rnd_state *state, u64 seed);
   /* rename from prandom32_seed() */
  u32 prandom_u32_state(struct rnd_state *state);
   /* rename from prandom32() */

The purpose of this renaming is to prevent some kernel developers from
assuming that prandom32() and random32() might imply that only
prandom32() was the one using a pseudo-random number generator by
prandom32's "p", and the result may be a very embarassing security
exposure.  This concern was expressed by Theodore Ts'o.

And furthermore, I'm going to introduce new functions for getting the
requested number of pseudo-random bytes.  If I continue to use both
prandom32 and random32 prefixes for these functions, the confusion
is getting worse.

As a result of this renaming, "prandom_" is the common prefix for
pseudo-random number library.

Currently, srandom32() and random32() are preserved because it is
difficult to rename too many users at once.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Robert Love <robert.w.love@intel.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Cc: David Laight <david.laight@aculab.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Artem Bityutskiy <dedekind1@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoaoe: fix use after free in aoedev_by_aoeaddr()
Dan Carpenter [Tue, 18 Dec 2012 00:04:21 +0000 (16:04 -0800)]
aoe: fix use after free in aoedev_by_aoeaddr()

We should return NULL on failure instead of returning a freed pointer.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoaoe: update internal version number to 81
Ed Cashin [Tue, 18 Dec 2012 00:04:19 +0000 (16:04 -0800)]
aoe: update internal version number to 81

This version number is printed to the console on module initialization
and is available in sysfs, which is where the userland aoe-version tool
looks for it.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoaoe: identify source of runt AoE packets
Ed Cashin [Tue, 18 Dec 2012 00:04:17 +0000 (16:04 -0800)]
aoe: identify source of runt AoE packets

This change only affects experimental AoE storage networks.

It modifies the console message about runt packets detected so that the
AoE major and minor addresses of the AoE target that generated the runt
are mentioned.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoaoe: allow comma separator in aoe_iflist value
Ed Cashin [Tue, 18 Dec 2012 00:04:15 +0000 (16:04 -0800)]
aoe: allow comma separator in aoe_iflist value

By default, the aoe driver uses any ethernet interface for AoE, but the
aoe_iflist module parameter provides a convenient way to limit AoE
traffic to a specific list of local network interfaces.

This change allows a list to be specified using the comma character as a
separator.  For example,

  modprobe aoe aoe_iflist=eth2,eth3

Before, it was inconvenient to get the quoting right in shell scripts
when setting aoe_iflist to have more than one network interface.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoaoe: allow user to disable target failure timeout
Ed Cashin [Tue, 18 Dec 2012 00:04:14 +0000 (16:04 -0800)]
aoe: allow user to disable target failure timeout

With this change, the aoe driver treats the value zero as special for
the aoe_deadsecs module parameter.  Normally, this value specifies the
number of seconds during which the driver will continue to attempt
retransmits to an unresponsive AoE target.  After aoe_deadsecs has
elapsed, the aoe driver marks the aoe device as "down" and fails all
I/O.

The new meaning of an aoe_deadsecs of zero is for the driver to
retransmit commands indefinitely.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoaoe: use dynamic number of remote ports for AoE storage target
Ed Cashin [Tue, 18 Dec 2012 00:04:11 +0000 (16:04 -0800)]
aoe: use dynamic number of remote ports for AoE storage target

Many AoE targets have four or fewer network ports, but some existing
storage devices have many, and the AoE protocol sets no limit.

This patch allows the use of more than eight remote MAC addresses per AoE
target, while reducing the amount of memory used by the aoe driver in
cases where there are many AoE targets with fewer than eight MAC addresses
each.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoaoe: avoid races between device destruction and discovery
Ed Cashin [Tue, 18 Dec 2012 00:04:09 +0000 (16:04 -0800)]
aoe: avoid races between device destruction and discovery

This change avoids a race that could result in a NULL pointer derference
following a WARNing from kobject_add_internal, "don't try to register
things with the same name in the same directory."

The problem was found with a test that forgets and discovers an
aoe device in a loop:

  while test ! -r /tmp/stop; do
aoe-flush -a
aoe-discover
  done

The race was between aoedev_flush taking aoedevs out of the devlist,
allowing a new discovery of the same AoE target to take place before the
driver gets around to calling sysfs_remove_group.  Fixing that one
revealed another race between do_open and add_disk, and this patch avoids
that, too.

The fix required some care, because for flushing (forgetting) an aoedev,
some of the steps must be performed under lock and some must be able to
sleep.  Also, for discovering a new aoedev, some steps might sleep.

The check for a bad aoedev pointer remains from a time when about half of
this patch was done, and it was possible for the
bdev->bd_disk->private_data to become corrupted.  The check should be
removed eventually, but it is not expected to add significant overhead,
occurring in the aoeblk_open routine.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoaoe: improve handling of misbehaving network paths
Ed Cashin [Tue, 18 Dec 2012 00:04:08 +0000 (16:04 -0800)]
aoe: improve handling of misbehaving network paths

An AoE target can have multiple network ports used for AoE, and in the
aoe driver, those are tracked by the aoetgt struct.  These changes allow
the aoe driver to handle network paths, or aoetgts, that are not working
well, compared to the others.

Paths that do not get responses despite the retransmission of AoE
commands are marked as "tainted", and non-tainted paths are preferred.

Meanwhile, the aoe driver attempts to "probe" the tainted path in the
background by issuing reads of LBA 0 that are padded out to full
(possibly jumbo-frame) size.  If the probes get responses, then the path
is "redeemed", and its taint is removed.

This mechanism has been shown to be helpful in transparently handling
and recovering from real-world network "brown outs" in ways that the
earlier "shoot the help-needing target in the head" mechanism could not.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoaoe: return real minor number for static minors
Ed Cashin [Tue, 18 Dec 2012 00:04:06 +0000 (16:04 -0800)]
aoe: return real minor number for static minors

The value returned by the static minor device number number allocator is
the real minor number, so it must be multiplied by the supported number
of partitions per aoedev.

Without this fix the support for systems without udev is incomplete, and
the few users of aoe on such systems will have surprising results when
device nodes names do not match the AoE target.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoaoe: initialize sysminor to avoid compiler warning
Ed Cashin [Tue, 18 Dec 2012 00:04:04 +0000 (16:04 -0800)]
aoe: initialize sysminor to avoid compiler warning

Because the minor_get and related functions use the return values for
errors, the compiler doesn't know that sysminor will always either 1) be
initialized in aoedev_by_aoeaddr by the call to minor_get, or 2) be
unused as the "goto out" is executed.

This patch avoids the compiler warning.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoaoe: make error messages more specific in static minor allocation
Ed Cashin [Tue, 18 Dec 2012 00:04:03 +0000 (16:04 -0800)]
aoe: make error messages more specific in static minor allocation

For some special-purpose systems where udev isn't present, static
allocation of minor numbers is desirable.  This update distinguishes
different failure scenarios, to help the user understand what went
wrong.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoaoe: remove call to request handler from I/O completion
Ed Cashin [Tue, 18 Dec 2012 00:04:02 +0000 (16:04 -0800)]
aoe: remove call to request handler from I/O completion

There is no need to call the request handler function in the I/O
completion routine.  The user impact of not doing it is a more "nice" aoe
driver that is less susceptible to causing soft lockups.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoaoe: cleanup: correct comment for aoetgt nout
Ed Cashin [Tue, 18 Dec 2012 00:04:01 +0000 (16:04 -0800)]
aoe: cleanup: correct comment for aoetgt nout

A misplaced comment was attached to the nout member of the aoetgt.  This
change corrects the comment.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoaoe: increase default cap on outstanding AoE commands in the network
Ed Cashin [Tue, 18 Dec 2012 00:04:00 +0000 (16:04 -0800)]
aoe: increase default cap on outstanding AoE commands in the network

The aoe driver will never be waiting for more than aoe_maxout AoE
commands from a given remote network port on an AoE target.  Increasing
the cap increases performance.  Users can tighten the setting to reduce
the amount of memory used for handling AoE traffic or the network
bandwidth used for AoE.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoaoe: remove vestigial request queue allocation
Ed Cashin [Tue, 18 Dec 2012 00:03:58 +0000 (16:03 -0800)]
aoe: remove vestigial request queue allocation

Before the aoe driver was an I/O request handler, it was a
make_request-style block driver.  Even so, there was a problem where
sysfs expected a request queue to exist, so one was provided in commit
7135a71b19be ("aoe: allocate unused request_queue for sysfs").

During the transition to the request-handler style, a patch was merged
that was based on a driver without the noop queue, and the noop queue
remained in place after the patch was merged, even though a new
functional queue was introduced by the patch, allocated through
blk_init_queue.

The user impact is a memory leak proportional to the number of AoE
targets discovered.  This patch removes the memory leak and cleans up
vestiges of the old do-nothing queue from the aoeblk_gdalloc function.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoaoe: copy fallback timing information on destination failover
Ed Cashin [Tue, 18 Dec 2012 00:03:55 +0000 (16:03 -0800)]
aoe: copy fallback timing information on destination failover

Commit f3b8e07af774 ("aoe: commands in retransmit queue use new
destination on failure") omits the copying of the coarse-grained time
when an AoE command was sent during the failover from one destination
MAC address on the AoE target to another.

The coarse-grained timing is only used when the system time changes or
an unlikely length of time has passed since the sending of the AoE
command.  Users will not be impacted unless their system clock is very
inaccurate or something unusual (e.g., 10 GbE link reset) happens during
the period when the aoe driver is handling the failure of a port on the
AoE target.  Being effected will mean that an AoE target could be
considered "down" too eagerly.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoaoe: update driver-internal version to 64+
Ed Cashin [Tue, 18 Dec 2012 00:03:53 +0000 (16:03 -0800)]
aoe: update driver-internal version to 64+

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoaoe: commands in retransmit queue use new destination on failure
Ed Cashin [Tue, 18 Dec 2012 00:03:51 +0000 (16:03 -0800)]
aoe: commands in retransmit queue use new destination on failure

When one remote MAC address isn't working as a destination for AoE
commands, the frames used to track information associated with the AoE
commands are moved to a new aoetgt (defined by the tuple of {AoE major,
AoE minor, target MAC address}).

This patch makes sure that the frames on the queue for retransmits that
need to be done are updated to use the new destination, so that
retransmits will be sent through a working network path.

Without this change, packets on the retransmit queue will be needlessly
retransmitted to the unresponsive destination MAC, possibly causing
premature target failure before there's time for the retransmit timer to
run again, decide to retransmit again, and finally update the destination
to a working MAC address on the AoE target.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoaoe: use high-resolution RTTs with fallback to low-res
Ed Cashin [Tue, 18 Dec 2012 00:03:49 +0000 (16:03 -0800)]
aoe: use high-resolution RTTs with fallback to low-res

These changes improve the accuracy of the decision about whether it's time
to retransmit an AoE command by using the microsecond-resolution
gettimeofday instead of jiffies.

Because the system time can jump suddenly, the decision reverts to using
jiffies if the high-resolution time difference is relatively large.
Otherwise the AoE targets could be considered failed inappropriately.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoaoe: manipulate aoedev network stats under lock
Ed Cashin [Tue, 18 Dec 2012 00:03:47 +0000 (16:03 -0800)]
aoe: manipulate aoedev network stats under lock

With this bugfix in place the calculation of the criterion for "lateness"
is performed under lock.  Without the lock, there is a chance that one of
the non-atomic operations performed on the round trip time statistics
could be incomplete, such that an incorrect lateness criterion would be
calculated.

Without this change, the effect of the bug would be rare unecessary but
benign retransmissions.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoaoe: err device: include MAC addresses for unexpected responses
Ed Cashin [Tue, 18 Dec 2012 00:03:45 +0000 (16:03 -0800)]
aoe: err device: include MAC addresses for unexpected responses

The /dev/etherd/err character device provides low-level information about
normal but sometimes interesting AoE command retransmits and "unexpected
responses", i.e., responses for packets that have already been
retransmitted.

This change adds MAC addresses to the messages about unexpected responses,
so that when they occur, it's more easy to determine the network paths to
which they belong.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoaoe: improve network congestion handling
Ed Cashin [Tue, 18 Dec 2012 00:03:43 +0000 (16:03 -0800)]
aoe: improve network congestion handling

The aoe driver already had some congestion handling, but it was limited in
its ability to cope with the kind of congestion that can arise on more
complex networks such as those involving paths through multiple ethernet
switches.

Some of the lessons from TCP's history of development can be applied to
improving the congestion control and avoidance on AoE storage networks.
These changes use familar concepts from Van Jacobson's "Congestion
Avoidance and Control" paper from '88, without adding significant
overhead.

This patch depends on an upcoming patch that covers the failover case when
AoE commands being retransmitted are transferred from one retransmit queue
to another.  Another upcoming patch increases the timing accuracy.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoaoe: provide ATA identify device content to user on request
Ed Cashin [Tue, 18 Dec 2012 00:03:42 +0000 (16:03 -0800)]
aoe: provide ATA identify device content to user on request

Make the aoe driver follow expected behavior when the user uses ioctl to
get the ATA device identify information, allowing access to model, serial
number, etc.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoaoe: update driver-internal version number to 60
Ed Cashin [Tue, 18 Dec 2012 00:03:41 +0000 (16:03 -0800)]
aoe: update driver-internal version number to 60

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoaoe: whitespace cleanup
Ed Cashin [Tue, 18 Dec 2012 00:03:39 +0000 (16:03 -0800)]
aoe: whitespace cleanup

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoaoe: cleanup: remove unused ata_scnt function
Ed Cashin [Tue, 18 Dec 2012 00:03:37 +0000 (16:03 -0800)]
aoe: cleanup: remove unused ata_scnt function

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoaoe: "payload" sysfs file exports per-AoE-command data transfer size
Ed Cashin [Tue, 18 Dec 2012 00:03:34 +0000 (16:03 -0800)]
aoe: "payload" sysfs file exports per-AoE-command data transfer size

The userland aoetools package includes an "aoe-stat" command that can
display a "payload size" column when the aoe driver exports this
information.  Users can quickly see what amount of user data is
transferred inside each AoE command on the network, network headers
excluded.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoaoe: support larger I/O requests via aoe_maxsectors module param
Ed Cashin [Tue, 18 Dec 2012 00:03:32 +0000 (16:03 -0800)]
aoe: support larger I/O requests via aoe_maxsectors module param

The GPFS filesystem is an example of an aoe user that requires the aoe
driver to support I/O request sizes larger than the default.  Most users
will not need large I/O request sizes, because they would need to be split
up into multiple AoE commands anyway.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoaoe: support the forgetting (flushing) of a user-specified AoE target
Ed Cashin [Tue, 18 Dec 2012 00:03:30 +0000 (16:03 -0800)]
aoe: support the forgetting (flushing) of a user-specified AoE target

Users sometimes want to cause the aoe driver to forget a particular
previously discovered device when it is no longer online.  The aoetools
provide an "aoe-flush" command that users run to perform this
administrative task.  The changes below provide the support needed in the
driver.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoaoe: update cap on outstanding commands based on config query response
Ed Cashin [Tue, 18 Dec 2012 00:03:29 +0000 (16:03 -0800)]
aoe: update cap on outstanding commands based on config query response

The ATA over Ethernet config query response contains a "buffer count"
field reflecting the AoE target's capacity to buffer incoming AoE
commands.

By taking the current value of this field into accound, we increase
performance throughput or avoid network congestion, when the value
has increased or decreased, respectively.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoaoe: print warning regarding a common reason for dropped transmits
Ed Cashin [Tue, 18 Dec 2012 00:03:28 +0000 (16:03 -0800)]
aoe: print warning regarding a common reason for dropped transmits

Dropped transmits are not common, but when they do occur, increasing
the transmit queue length often helps.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoaoe: describe the behavior of the "err" character device
Ed Cashin [Tue, 18 Dec 2012 00:03:26 +0000 (16:03 -0800)]
aoe: describe the behavior of the "err" character device

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoDocumentation/sparse.txt: document context annotations for lock checking
Ed Cashin [Tue, 18 Dec 2012 00:03:25 +0000 (16:03 -0800)]
Documentation/sparse.txt: document context annotations for lock checking

The context feature of sparse is used with the Linux kernel sources to
check for imbalanced uses of locks.  Document the annotations defined in
include/linux/compiler.h that tell sparse what to expect when a lock is
held on function entry, exit, or both.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Acked-by: Christopher Li <sparse@chrisli.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agolinux/compiler.h: add __must_hold macro for functions called with a lock held
Josh Triplett [Tue, 18 Dec 2012 00:03:24 +0000 (16:03 -0800)]
linux/compiler.h: add __must_hold macro for functions called with a lock held

linux/compiler.h has macros to denote functions that acquire or release
locks, but not to denote functions called with a lock held that return
with the lock still held.  Add a __must_hold macro to cover that case.

Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Reported-by: Ed Cashin <ecashin@coraid.com>
Tested-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agopidns: remove unused is_container_init()
Gao feng [Tue, 18 Dec 2012 00:03:22 +0000 (16:03 -0800)]
pidns: remove unused is_container_init()

Since commit 1cdcbec1a337 ("CRED: Neuter sys_capset()")
is_container_init() has no callers.

Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Cc: David Howells <dhowells@redhat.com>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoexec: use -ELOOP for max recursion depth
Kees Cook [Tue, 18 Dec 2012 00:03:20 +0000 (16:03 -0800)]
exec: use -ELOOP for max recursion depth

To avoid an explosion of request_module calls on a chain of abusive
scripts, fail maximum recursion with -ELOOP instead of -ENOEXEC. As soon
as maximum recursion depth is hit, the error will fail all the way back
up the chain, aborting immediately.

This also has the side-effect of stopping the user's shell from attempting
to reexecute the top-level file as a shell script. As seen in the
dash source:

        if (cmd != path_bshell && errno == ENOEXEC) {
                *argv-- = cmd;
                *argv = cmd = path_bshell;
                goto repeat;
        }

The above logic was designed for running scripts automatically that lacked
the "#!" header, not to re-try failed recursion. On a legitimate -ENOEXEC,
things continue to behave as the shell expects.

Additionally, when tracking recursion, the binfmt handlers should not be
involved. The recursion being tracked is the depth of calls through
search_binary_handler(), so that function should be exclusively responsible
for tracking the depth.

Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: halfdog <me@halfdog.net>
Cc: P J P <ppandit@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoproc: pid/status: show all supplementary groups
Artem Bityutskiy [Tue, 18 Dec 2012 00:03:17 +0000 (16:03 -0800)]
proc: pid/status: show all supplementary groups

We display a list of supplementary group for each process in
/proc/<pid>/status.  However, we show only the first 32 groups, not all of
them.

Although this is rare, but sometimes processes do have more than 32
supplementary groups, and this kernel limitation breaks user-space apps
that rely on the group list in /proc/<pid>/status.

Number 32 comes from the internal NGROUPS_SMALL macro which defines the
length for the internal kernel "small" groups buffer.  There is no
apparent reason to limit to this value.

This patch removes the 32 groups printing limit.

The Linux kernel limits the amount of supplementary groups by NGROUPS_MAX,
which is currently set to 65536.  And this is the maximum count of groups
we may possibly print.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years ago/proc/pid/status: add "Seccomp" field
Kees Cook [Tue, 18 Dec 2012 00:03:14 +0000 (16:03 -0800)]
/proc/pid/status: add "Seccomp" field

It is currently impossible to examine the state of seccomp for a given
process.  While attaching with gdb and attempting "call
prctl(PR_GET_SECCOMP,...)" will work with some situations, it is not
reliable.  If the process is in seccomp mode 1, this query will kill the
process (prctl not allowed), if the process is in mode 2 with prctl not
allowed, it will similarly be killed, and in weird cases, if prctl is
filtered to return errno 0, it can look like seccomp is disabled.

When reviewing the state of running processes, there should be a way to
externally examine the seccomp mode.  ("Did this build of Chrome end up
using seccomp?" "Did my distro ship ssh with seccomp enabled?")

This adds the "Seccomp" line to /proc/$pid/status.

Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: James Morris <jmorris@namei.org>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoprocfs: add VmFlags field in smaps output
Cyrill Gorcunov [Tue, 18 Dec 2012 00:03:13 +0000 (16:03 -0800)]
procfs: add VmFlags field in smaps output

During c/r sessions we've found that there is no way at the moment to
fetch some VMA associated flags, such as mlock() and madvise().

This leads us to a problem -- we don't know if we should call for mlock()
and/or madvise() after restore on the vma area we're bringing back to
life.

This patch intorduces a new field into "smaps" output called VmFlags,
where all set flags associated with the particular VMA is shown as two
letter mnemonics.

[ Strictly speaking for c/r we only need mlock/madvise bits but it has been
  said that providing just a few flags looks somehow inconsistent.  So all
  flags are here now. ]

This feature is made available on CONFIG_CHECKPOINT_RESTORE=n kernels, as
other applications may start to use these fields.

The data is encoded in a somewhat awkward two letters mnemonic form, to
encourage userspace to be prepared for fields being added or removed in
the future.

[a.p.zijlstra@chello.nl: props to use for_each_set_bit]
[sfr@canb.auug.org.au: props to use array instead of struct]
[akpm@linux-foundation.org: overall redesign and simplification]
[akpm@linux-foundation.org: remove unneeded braces per sfr, avoid using bloaty for_each_set_bit()]
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoproc: don't show nonexistent capabilities
Andrew Vagin [Tue, 18 Dec 2012 00:03:10 +0000 (16:03 -0800)]
proc: don't show nonexistent capabilities

Without this patch it is really hard to interpret a bounding set, if
CAP_LAST_CAP is unknown for a current kernel.

Non-existant capabilities can not be deleted from a bounding set with help
of prctl.

E.g.: Here are two examples without/with this patch.

  CapBnd: ffffffe0fdecffff
  CapBnd: 00000000fdecffff

I suggest to hide non-existent capabilities. Here is two reasons.
* It's logically and easier for using.
* It helps to checkpoint-restore capabilities of tasks, because tasks
can be restored on another kernel, where CAP_LAST_CAP is bigger.

Signed-off-by: Andrew Vagin <avagin@openvz.org>
Cc: Andrew G. Morgan <morgan@kernel.org>
Reviewed-by: Serge E. Hallyn <serge.hallyn@canonical.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoptrace: introduce PTRACE_O_EXITKILL
Oleg Nesterov [Tue, 18 Dec 2012 00:03:07 +0000 (16:03 -0800)]
ptrace: introduce PTRACE_O_EXITKILL

Ptrace jailers want to be sure that the tracee can never escape
from the control. However if the tracer dies unexpectedly the
tracee continues to run in potentially unsafe mode.

Add the new ptrace option PTRACE_O_EXITKILL. If the tracer exits
it sends SIGKILL to every tracee which has this bit set.

Note that the new option is not equal to the last-option << 1.  Because
currently all options have an event, and the new one starts the eventless
group.  It uses the random 20 bit, so we have the room for 12 more events,
but we can also add the new eventless options below this one.

Suggested by Amnon Shiloh.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Tested-by: Amnon Shiloh <u3557@miso.sublimeip.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: Chris Evans <scarybeasts@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agosimple_strto*: annotate function as obsolete
Eldad Zack [Tue, 18 Dec 2012 00:03:05 +0000 (16:03 -0800)]
simple_strto*: annotate function as obsolete

Update the documentation for simple_strto* to reflect that it has been
obsoleted and advise the usage of kstrto*.

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Cc: J. Bruce Fields <bfields@fieldses.org>
Cc: Joe Perches <joe@perches.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Rob Landley <rob@landley.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agokstrto*: add documentation
Eldad Zack [Tue, 18 Dec 2012 00:03:04 +0000 (16:03 -0800)]
kstrto*: add documentation

As Bruce Fields pointed out, kstrto* is currently lacking kerneldoc
comments.  This patch adds kerneldoc comments to common variants of
kstrto*: kstrto(u)l, kstrto(u)ll and kstrto(u)int.

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Cc: J. Bruce Fields <bfields@fieldses.org>
Cc: Joe Perches <joe@perches.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Rob Landley <rob@landley.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoDocumentation: fix Documentation/security/00-INDEX
Jarkko Sakkinen [Tue, 18 Dec 2012 00:03:02 +0000 (16:03 -0800)]
Documentation: fix Documentation/security/00-INDEX

keys-ecryptfs.txt was missing from 00-INDEX.

Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agofs/fat: strip "cp" prefix from codepage in display
Dave Reisner [Tue, 18 Dec 2012 00:03:01 +0000 (16:03 -0800)]
fs/fat: strip "cp" prefix from codepage in display

Option parsing code expects an unsigned integer for the codepage option,
but prefixes and stores this option with "cp" before passing to
load_nls().  This makes the displayed option in /proc an invalid one.
Strip the prefix when printing so that the displayed option is valid for
reuse.

Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agofat: ix mount option parsing
Jan Kara [Tue, 18 Dec 2012 00:02:59 +0000 (16:02 -0800)]
fat: ix mount option parsing

parse_options() is supposed to return value < 0 on error however we
returned 0 (success) in a lot of cases.  This actually was not a problem
in practice because match_token() used by parse_options() is clever and
catches most of the problems for us.

Signed-off-by: Jan Kara <jack@suse.cz>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agofat: provide option for setting timezone offset
Jan Kara [Tue, 18 Dec 2012 00:02:58 +0000 (16:02 -0800)]
fat: provide option for setting timezone offset

So far FAT either offsets time stamps by sys_tz.minuteswest or leaves them
as they are (when tz=UTC mount option is used).  However in some cases it
is useful if one can specify time stamp offset on his own (e.g.  when time
zone of the camera connected is different from time zone of the computer,
or when HW clock is in UTC and thus sys_tz.minuteswest == 0).

So provide a mount option time_offset= which allows user to specify offset
in minutes that should be applied to time stamps on the filesystem.

akpm: this code would work incorrectly when used via `mount -o remount',
because cached inodes would not be updated.  But fatfs's fat_remount() is
basically a no-op anyway.

Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agofat: notify when discard is not supported
Namjae Jeon [Tue, 18 Dec 2012 00:02:56 +0000 (16:02 -0800)]
fat: notify when discard is not supported

Change fatfs so that a warning is emitted when an attempt is made to mount
a filesystem with the unsupported `discard' option.

ext4 aready does this: http://patchwork.ozlabs.org/patch/192668/

Signed-off-by: Namjae Jeon <linkinjeon@gmail.com>
Signed-off-by: Amit Sahrawat <amit.sahrawat83@gmail.com>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agortc: DA9055 RTC driver
Ashish Jangam [Tue, 18 Dec 2012 00:02:53 +0000 (16:02 -0800)]
rtc: DA9055 RTC driver

A driver for the DA9055 PMIC.  This has a dependency upon the DA9055 MFD
core.

Functionally tested on Samsung SMDKV6410.

Signed-off-by: David Dajun Chen <dchen@diasemi.com>
Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agodrivers/rtc/rtc-s3c: use of_match_ptr() macro
Sachin Kamat [Tue, 18 Dec 2012 00:02:52 +0000 (16:02 -0800)]
drivers/rtc/rtc-s3c: use of_match_ptr() macro

This eliminates having an #ifdef returning NULL for the case when OF is
disabled.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agodrivers/rtc/rtc-tps65910.c: enable RTC power domain on initialization
Kim, Milo [Tue, 18 Dec 2012 00:02:51 +0000 (16:02 -0800)]
drivers/rtc/rtc-tps65910.c: enable RTC power domain on initialization

Enabling RTC HW block depends on the default value of TPS65910 register.
In some mode, RTC block is disabled by default.(eg.  AM3517 Craneboard) In
this case, RTC_PWDN(RTC power down) bit should be cleared to enable the
RTC HW block.

This patch also works in case that RTC block is active by default, because
there is no side effect even if the bit is updated again.

Tested on AM3517 Craneboard.

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Acked-by: Venu Byravarasu <vbyravarasu@nvidia.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Sivaram Nair <sivaramn@nvidia.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agodrivers/rtc/rtc-dev.c: remove unused code from rtc-dev.c
Sachin Kamat [Tue, 18 Dec 2012 00:02:49 +0000 (16:02 -0800)]
drivers/rtc/rtc-dev.c: remove unused code from rtc-dev.c

This code is under #if 0 and not used.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agodrivers/rtc/rtc-s3c.c: convert to use devm_* API
Tushar Behera [Tue, 18 Dec 2012 00:02:48 +0000 (16:02 -0800)]
drivers/rtc/rtc-s3c.c: convert to use devm_* API

rtc-s3c driver is modified to use devm_request_and_ioremap() (combining
request_mem_region and ioremap), devm_clk_get() and devm_request_irq()
APIs.  Since this removes the necessity of freeing the related resources
the return path is also simplified.

Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agodrivers/rtc/rtc-s3c.c: remove unnecessary err_nores label
Tushar Behera [Tue, 18 Dec 2012 00:02:45 +0000 (16:02 -0800)]
drivers/rtc/rtc-s3c.c: remove unnecessary err_nores label

err_nores label redirects to a simple return statement.  Move the return
statement to caller location and remove the label.

Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agortc: add NXP PCF8523 support
Thierry Reding [Tue, 18 Dec 2012 00:02:44 +0000 (16:02 -0800)]
rtc: add NXP PCF8523 support

Add an RTC driver for PCF8523 chips by NXP Semiconductors.  No support is
currently provided for the alarm and interrupt functions.  Only the time
and date functionality is implemented.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agortc: rtc-davinci: use devm_kzalloc()
Devendra Naga [Tue, 18 Dec 2012 00:02:41 +0000 (16:02 -0800)]
rtc: rtc-davinci: use devm_kzalloc()

Use devm_kzalloc() and remove the error path free and the unload free as
devm functions take care of freeing resources.

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Miguel Aguilar <miguel.aguilar@ridgerun.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agortc: rtc-davinci: return correct error code if rtc_device_register() fails
Devendra Naga [Tue, 18 Dec 2012 00:02:39 +0000 (16:02 -0800)]
rtc: rtc-davinci: return correct error code if rtc_device_register() fails

rtc_device_register() returns a pointer containing error code in case
of error.  Use that in the error return.

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Miguel Aguilar <miguel.aguilar@ridgerun.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agodrivers/rtc/rtc-tps65910.c: rename irq to match device
Sivaram Nair [Tue, 18 Dec 2012 00:02:37 +0000 (16:02 -0800)]
drivers/rtc/rtc-tps65910.c: rename irq to match device

A cosmetic change to rename the irq name to match the device name.

Signed-off-by: Sivaram Nair <sivaramn@nvidia.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agortc: rtc-spear: Provide flag for no support of UIE mode
Deepak Sikri [Tue, 18 Dec 2012 00:02:34 +0000 (16:02 -0800)]
rtc: rtc-spear: Provide flag for no support of UIE mode

The applications can set the RTC hardware to trigger interrupts in one
of three modes:
    * AIE: Alarm interrupt
    * UIE: Update interrupt (ie: once per second)
    * PIE: Periodic interrupt (sub-second irqs)

The above defined 3 modes are to be supported in the RTC HW in form of
interrupts. The SPEAr RTC hardware does not support the later two modes.

There have been refinements in the RTC core in mainline related to
use of timer queue infrastructure to manage events in RTC. Please refer
the below mentioned patch for details:
* RTC: Rework RTC code to use timerqueue for events
* SHA ID: 6610e0893b8bc6f59b14fed7f089c5997f035f88

There have been provisions added to support hardware that do not have
support the UIE mode. Please refer the following patch.
* rtc: Provide flag for rtc devices that don't support UIE
* SHA ID: 4a649903f91232d02284d53724b0a45728111767

The patch makes use of the provision defined in the above patch to
update the hardware status of UIE mode.

Signed-off-by: Deepak Sikri <deepak.sikri@st.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agortc: rtc-spear: Add clk_{un}prepare() support
Deepak Sikri [Tue, 18 Dec 2012 00:02:32 +0000 (16:02 -0800)]
rtc: rtc-spear: Add clk_{un}prepare() support

clk_{un}prepare is mandatory for platforms using common clock framework.
Because for SPEAr we don't do anything in clk_{un}prepare() calls, just
call them once in probe/remove.

Signed-off-by: Deepak Sikri <deepak.sikri@st.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agortc: rtc-spear: use devm_*() routines
Viresh Kumar [Tue, 18 Dec 2012 00:02:29 +0000 (16:02 -0800)]
rtc: rtc-spear: use devm_*() routines

Free the rtc-spear driver from tension of freeing resources :) devm_*
derivatives of multiple routines are used while allocating resources,
which would be freed automatically by kernel.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Deepak Sikri <deepak.sikri@st.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agodrivers/rtc/rtc-test.c: avoid calling platform_device_put() twice
Wei Yongjun [Tue, 18 Dec 2012 00:02:27 +0000 (16:02 -0800)]
drivers/rtc/rtc-test.c: avoid calling platform_device_put() twice

In case of error, test_init() needs to call platform_device_del() instead
of platform_device_unregister().  Otherwise, we may call
platform_device_put() twice.

dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)

[akpm@linux-foundation.org: improve label naming]
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agodrivers/rtc/rtc-vt8500.c: convert to use devm_kzalloc
Devendra Naga [Tue, 18 Dec 2012 00:02:26 +0000 (16:02 -0800)]
drivers/rtc/rtc-vt8500.c: convert to use devm_kzalloc

Replace the kzalloc() and kfree() calls with devm_kzalloc().

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexey Charkov <alchark@gmail.com>
Acked-by: Tony Prisk <linux@prisktech.co.nz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agodrivers/rtc/rtc-imxdi.c: add devicetree support
Roland Stigge [Tue, 18 Dec 2012 00:02:23 +0000 (16:02 -0800)]
drivers/rtc/rtc-imxdi.c: add devicetree support

Add device tree support to the rtc-imxdi driver.

Signed-off-by: Roland Stigge <stigge@antcom.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agodrivers/rtc/rtc-imxdi: support for i.MX53
Roland Stigge [Tue, 18 Dec 2012 00:02:22 +0000 (16:02 -0800)]
drivers/rtc/rtc-imxdi: support for i.MX53

Enable support for i.MX53 in addition to i.MX25 by enabling the driver on
ARCH_MXC generally.

Signed-off-by: Roland Stigge <stigge@antcom.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agortc: omap: add runtime pm support
Vaibhav Hiremath [Tue, 18 Dec 2012 00:02:18 +0000 (16:02 -0800)]
rtc: omap: add runtime pm support

OMAP1 RTC driver is used in multiple devices like, OMAPL138 and AM33XX.
Driver currently doesn't handle any clocks, which may be right for OMAP1
architecture but in case of AM33XX, the clock/module needs to be enabled
in order to access the registers.

So convert this driver to runtime pm, which internally handles rest.

[afzal@ti.com: handle error path]
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Afzal Mohammed <afzal@ti.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Daniel Mack <zonque@gmail.com>
Cc: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>