9 years agommc: core: HS200 mode support for eMMC 4.5
Girish K S [Wed, 11 Jan 2012 19:04:52 +0000 (14:04 -0500)]
mmc: core: HS200 mode support for eMMC 4.5

This patch adds the support of the HS200 bus speed for eMMC 4.5 devices.
The eMMC 4.5 devices have support for 200MHz bus speed. The function
prototype of the tuning function is modified to handle the tuning
command number which is different in sd and mmc case.

Signed-off-by: Girish K S <girish.shivananjappa@linaro.org>
Signed-off-by: Philip Rakity <prakity@marvell.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
9 years agommc: dw_mmc: fixed wrong bit operation for SDMMC_GET_FCNT()
Jaehoon Chung [Thu, 5 Jan 2012 10:12:57 +0000 (19:12 +0900)]
mmc: dw_mmc: fixed wrong bit operation for SDMMC_GET_FCNT()

In status register, fifo_count is bit[29:17].
(0x1FFF is correct)

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Will Newton <will.newton@imgtec.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
9 years agommc: core: Separate the timeout value for cache-ctrl
Seungwon Jeon [Fri, 9 Dec 2011 08:47:17 +0000 (17:47 +0900)]
mmc: core: Separate the timeout value for cache-ctrl

Turning the cache off implies flushing cache which doesn't define
maximum timeout unlike cache-on. This patch will apply the generic
CMD6 timeout only for cache-on. Additionally the kernel message is
added for checking failure case of cache-on.

Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
9 years agommc: sdhci-spear: Fix compilation error
Viresh Kumar [Wed, 4 Jan 2012 06:18:42 +0000 (11:48 +0530)]
mmc: sdhci-spear: Fix compilation error

With the inclusion of following patch (59b5bc3929b37):
"mmc: sdhci: remove "state" argument from sdhci_suspend_host"

we get a compilation error for sdhci-spear:
drivers/mmc/host/sdhci-spear.c:283:2: error: too many arguments to function

This patch fixes this error.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
9 years agommc: sdhci: Deal with failure case in sdhci_suspend_host
Aaron Lu [Wed, 4 Jan 2012 02:07:43 +0000 (10:07 +0800)]
mmc: sdhci: Deal with failure case in sdhci_suspend_host

If there are errors happened in sdhci_suspend_host, handle it so that
when the function returns with an error, the host's behaviour is the
same before this function call, e.g. card detection is enabled and
tuning timer is active, etc.

Signed-off-by: Philip Rakity <prakity@marvell.com>
Signed-off-by: Aaron Lu <aaron.lu@amd.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
9 years agommc: dw_mmc: Clear the DDR mode for non-DDR
Seungwon Jeon [Mon, 2 Jan 2012 07:00:02 +0000 (16:00 +0900)]
mmc: dw_mmc: Clear the DDR mode for non-DDR

UHS_REG should be cleared for non-DDR mode. But currently there is
no way to clear DDR mode, if it is already set once. This patch adds
clearing DDR mode for non-DDR mode.

Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
Acked-by: Will Newton <will.newton@imgtec.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
9 years agommc: sd: Fix SDR12 timing regression
Alexander Elbs [Wed, 4 Jan 2012 04:26:53 +0000 (23:26 -0500)]
mmc: sd: Fix SDR12 timing regression

This patch fixes a failure to recognize SD cards reported on a Dell
Vostro with O2 Micro SD card reader.  Patch 49c468f ("mmc: sd: add
support for uhs bus speed mode selection") caused the problem, by
setting the SDHCI_CTRL_HISPD flag even for legacy timings.

Signed-off-by: Alexander Elbs <alex@segv.de>
Acked-by: Philip Rakity <prakity@marvell.com>
Acked-by: Arindam Nath <arindam.nath@amd.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
9 years agommc: sdhci: Fix tuning timer incorrect setting when suspending host
Aaron Lu [Wed, 28 Dec 2011 03:11:12 +0000 (11:11 +0800)]
mmc: sdhci: Fix tuning timer incorrect setting when suspending host

When suspending host, the tuning timer shoule be deactivated.
And the HOST_NEEDS_TUNING flag should be set after tuning timer is

Signed-off-by: Philip Rakity <prakity@marvell.com>
Signed-off-by: Aaron Lu <aaron.lu@amd.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
9 years agommc: core: Add option to prevent eMMC sleep command
Ulf Hansson [Mon, 19 Dec 2011 15:24:19 +0000 (16:24 +0100)]
mmc: core: Add option to prevent eMMC sleep command

Host may now use MMC_CAP2_NO_SLEEP_CMD to disable the use
of eMMC sleep/awake command.

This option can be used when your platform has a buggy
kernel crash dump software, which is supposed to store
the dump on the eMMC, but is not able to wake up the eMMC
from sleep state.

In particular, failures have been seen with u-boot; even if
it is fixed there, platforms will be slow to update their
bootloader binaries.

Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com>
Reviewed-by: Hanumath Prasad <hanumath.prasad@stericsson.com>
Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Acked-by: Subhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
9 years agommc: omap_hsmmc: use threaded irq handler for card-detect.
NeilBrown [Fri, 30 Dec 2011 01:35:13 +0000 (12:35 +1100)]
mmc: omap_hsmmc: use threaded irq handler for card-detect.

As the card-detect irq handler just schedules work to be done by a
thread, we can use request_threaded_irq to do much of the work for
us.  This means that interrupts which arrive by handle_nested_irq
actually work.

Reviewed-by: Felipe Balbi <balbi@ti.com>
Tested-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Acked-by: Kishore Kadiyala <kishorek.kadiyala@gmail.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
9 years agommc: sdhci-pci: enable runtime PM for Medfield SDIO
Adrian Hunter [Tue, 27 Dec 2011 13:48:47 +0000 (15:48 +0200)]
mmc: sdhci-pci: enable runtime PM for Medfield SDIO

Runtime PM for SDIO is no longer enabled by default (see
5c7f0e083d2d98ba14ddd10e88f001a0ead4cae4) so it must now
be enabled per platform, in this case Medfield uses it.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
9 years agommc: sdhci: Always pass clock request value zero to set_clock host op
Todd Poynor [Tue, 27 Dec 2011 13:48:46 +0000 (15:48 +0200)]
mmc: sdhci: Always pass clock request value zero to set_clock host op

To allow the set_clock host op to disable the SDCLK source when not
needed, always call the host op when the requested clock speed is
zero.  Do this even if host->clock already equals zero, because
the SDHCI driver may set that value (without calling the host op)
to force an update at the next (non-zero-speed) call.

Signed-off-by: Todd Poynor <toddpoynor@google.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
9 years agommc: sdhci-pci: remove SDHCI_QUIRK2_OWN_CARD_DETECTION
Adrian Hunter [Tue, 27 Dec 2011 13:48:45 +0000 (15:48 +0200)]
mmc: sdhci-pci: remove SDHCI_QUIRK2_OWN_CARD_DETECTION

Even if a driver provides separate card detection, an interrupt
is still needed to abort mmc requests that are in progress.
SDHCI_QUIRK2_OWN_CARD_DETECTION prevents that, so remove it.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
9 years agommc: sdhci-pci: get gpio numbers from platform data
Adrian Hunter [Tue, 27 Dec 2011 13:48:44 +0000 (15:48 +0200)]
mmc: sdhci-pci: get gpio numbers from platform data

Retrieve the GPIO numbers for hardware reset and
card detect from platform data.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
9 years agommc: sdhci-pci: add platform data
Adrian Hunter [Tue, 27 Dec 2011 13:48:43 +0000 (15:48 +0200)]
mmc: sdhci-pci: add platform data

Add a means of getting platform data for the SDHCI PCI
devices.  The data is stored against the slot not the
device in order to support multi-slot devices.

The data allows platform-specific setup (such as getting
GPIO numbers from firmware or setting up wl12xx for SDIO)
to be done in platform support files instead of the
sdhci-pci driver.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
9 years agommc: sdhci: prevent card detection activity for non-removable cards
Adrian Hunter [Tue, 27 Dec 2011 13:48:42 +0000 (15:48 +0200)]
mmc: sdhci: prevent card detection activity for non-removable cards

Do not enable card detection interrupts for non-removable cards.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
9 years agommc: sdhci: fix vmmc handling
Adrian Hunter [Tue, 27 Dec 2011 13:48:41 +0000 (15:48 +0200)]
mmc: sdhci: fix vmmc handling

Presently the vmmc regulator is enabled when the host
controller is added and disabled when it is removed.
However, the vmmc regulator should be under the control
of the upper layers via ->set_ios().  Make it so.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
9 years agommc: core: Add claiming of hosts during mmc_cache_ctrl
Seungwon Jeon [Mon, 26 Dec 2011 09:03:05 +0000 (18:03 +0900)]
mmc: core: Add claiming of hosts during mmc_cache_ctrl

While calling mmc_cache_ctrl() a host is not claimed. This patch
adds the mmc_try_claim_host() for quick response in suspend.

Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
9 years agommc: omap: remove clock rate hard coding
Balaji TK [Tue, 20 Dec 2011 09:42:00 +0000 (15:12 +0530)]
mmc: omap: remove clock rate hard coding

MMC master clock rate can vary for each instance of the MMC controller
on the device. Use clk_get_rate instead to get the value.

Signed-off-by: Balaji TK <balajitk@ti.com>
Reviewed-by: Venkatraman S <svenkatr@ti.com>
Tested-by: Hebbar, Gururaja <gururaja.hebbar@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
9 years agommc: sh_mmcif: remove now superfluous sh_mmcif_host::data member
Guennadi Liakhovetski [Mon, 26 Dec 2011 17:52:13 +0000 (12:52 -0500)]
mmc: sh_mmcif: remove now superfluous sh_mmcif_host::data member

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
9 years agommc: sh_mmcif: process requests asynchronously
Guennadi Liakhovetski [Sun, 25 Dec 2011 20:07:52 +0000 (21:07 +0100)]
mmc: sh_mmcif: process requests asynchronously

This patch converts the sh_mmcif MMC host driver to process requests
asynchronously instead of waiting in its .request() method for completion.
This is achieved by using threaded IRQs.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
9 years agommc: sh_mmcif: cosmetic clean up
Guennadi Liakhovetski [Wed, 14 Dec 2011 18:31:52 +0000 (19:31 +0100)]
mmc: sh_mmcif: cosmetic clean up

This patch doesn't introduce any functional changes, it only simplifies
some code fragments, removes superfluous parameters, fixes typos.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
9 years agommc: sh_mmcif: process error interrupts first
Guennadi Liakhovetski [Wed, 14 Dec 2011 18:31:51 +0000 (19:31 +0100)]
mmc: sh_mmcif: process error interrupts first

If an interrupt is coming with both error and data completion status bits
set, it has to be handled as an error interrupt, for which error interrupts
have to be processed first. The current version of the driver on the
contrary doesn't recognise such interrupts as an error event, which leads
to data corruption and breaks the error recovery.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
9 years agommc: add a generic GPIO card-detect helper
Guennadi Liakhovetski [Sun, 25 Dec 2011 20:36:02 +0000 (21:36 +0100)]
mmc: add a generic GPIO card-detect helper

This patch adds a primitive helper to support card hotplug detection on
platforms, where a GPIO, capable of producing interrupts, is used for
detection of card-insertion and -removal events.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
9 years agommc: add a card hotplug handler context
Guennadi Liakhovetski [Mon, 26 Dec 2011 01:40:03 +0000 (20:40 -0500)]
mmc: add a card hotplug handler context

SD/MMC controllers provide different card insertion and removal detection
methods. On some of them the controller itself issues an interrupt, on
others polling is used, on yet others auxiliary means are used for this
purpose, e.g., a GPIO IRQ. Further, on some systems one of those methods
can be chosen at driver probing time and configured in software. E.g., on
some systems the SD/MMC controller card hot-plug detection pin can be
configured either as a respective controller functions, or an IRQ-capable
GPIO. To support such flexible configurations a card hot-plug context
is added by this patch.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
9 years agommc: tmio_mmc: Hotplug code regrouping
Bastian Hecht [Fri, 23 Dec 2011 22:03:13 +0000 (23:03 +0100)]
mmc: tmio_mmc: Hotplug code regrouping

This patch regroups the code slightly, adds documentation and allows
the rtpm counter of MMC_CAP_NEEDS_POLL devices to reach 0 again.

Signed-off-by: Bastian Hecht <hechtb@gmail.com>
[g.liakhovetski@gmx.de: restore pm_runtime_get_noresume()]
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
9 years agommc: core: Fix voltage select in DDR mode
Girish K S [Thu, 15 Dec 2011 11:57:42 +0000 (17:27 +0530)]
mmc: core: Fix voltage select in DDR mode

This patch fixes the wrong comparison before setting the interface
voltage in DDR mode.

The assignment to the variable ddr before comaprison is either
ddr = MMC_1_2V_DDR_MODE; or ddr == MMC_1_8V_DDR_MODE. But the comparison
is done with the extended csd value if ddr == EXT_CSD_CARD_TYPE_DDR_1_2V.

Signed-off-by: Girish K S <girish.shivananjappa@linaro.org>
Acked-by: Subhash Jadavani <subhashj@codeaurora.org>
Acked-by: Philip Rakity <prakity@marvell.com>
Cc: <stable@kernel.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
9 years agommc: sdhci-s3c: use S3C_SDHCI_CONTROL2 instead of hardcoded offset value
Jingoo Han [Wed, 14 Dec 2011 04:25:46 +0000 (13:25 +0900)]
mmc: sdhci-s3c: use S3C_SDHCI_CONTROL2 instead of hardcoded offset value

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
9 years agommc: dw_mmc: Support predefined mutiple block transfers
Seungwon Jeon [Thu, 22 Dec 2011 09:01:29 +0000 (18:01 +0900)]
mmc: dw_mmc: Support predefined mutiple block transfers

This patch adds the support for predefined multiple block r/w.
dw_mmc can support MMC_CAP_CMD23 capability.

Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
Acked-by: Will Newton <will.newton@imgtec.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
9 years agommc: dw_mmc: Remove unnecessary else clauses
Chris Ball [Sun, 25 Dec 2011 02:06:06 +0000 (21:06 -0500)]
mmc: dw_mmc: Remove unnecessary else clauses

Signed-off-by: Chris Ball <cjb@laptop.org>
9 years agommc: dw_mmc: Add more capabilities field
Seungwon Jeon [Fri, 9 Dec 2011 05:55:52 +0000 (14:55 +0900)]
mmc: dw_mmc: Add more capabilities field

This patch adds another capabilities field for MMC_CAPS2_XXX.

Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
9 years agommc: dw_mmc: use dev_pm_ops for dw_mmc controllers
Jaehoon Chung [Thu, 8 Dec 2011 10:23:03 +0000 (19:23 +0900)]
mmc: dw_mmc: use dev_pm_ops for dw_mmc controllers

This patch modifies dw_mmc to use dev_pm_ops.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
9 years agommc: card: Kill block requests if card is removed
Sujit Reddy Thumma [Thu, 8 Dec 2011 08:35:50 +0000 (14:05 +0530)]
mmc: card: Kill block requests if card is removed

Kill block requests when the host realizes that the card is
removed from the slot and is sure that subsequent requests
are bound to fail. Do this silently so that the block
layer doesn't output unnecessary error messages.

Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
9 years agommc: core: Fixup delayed work clock gating patch
Stephen Boyd [Mon, 5 Dec 2011 18:28:44 +0000 (10:28 -0800)]
mmc: core: Fixup delayed work clock gating patch

c31b50e (mmc: core: Use delayed work in clock gating framework,
2011-11-14) missed a few things during review:

 o A useless pr_info()

 o milliseconds was written as two words

 o The sysfs file had units in its output

Fix all three problems.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Cc: Sujit Reddy Thumma <sthumma@codeaurora.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
9 years agommc: sdhci-pci: simplify error handling
Axel Lin [Sat, 3 Dec 2011 07:28:05 +0000 (15:28 +0800)]
mmc: sdhci-pci: simplify error handling

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
9 years agommc: boot partition ro lock support
Johan Rudholm [Fri, 2 Dec 2011 07:51:06 +0000 (08:51 +0100)]
mmc: boot partition ro lock support

Enable boot partitions to be read-only locked until next power on via
a sysfs entry. There will be one sysfs entry for each boot partition:


Each boot partition is locked by writing 1 to its file.

Signed-off-by: Johan Rudholm <johan.rudholm@stericsson.com>
Signed-off-by: John Beckett <john.beckett@stericsson.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
9 years agoARM: SAMSUNG: Add pm_caps into platform data
Sangwook Lee [Thu, 8 Dec 2011 03:49:29 +0000 (22:49 -0500)]
ARM: SAMSUNG: Add pm_caps into platform data

Add pm_caps into platform_data. This is power management, usually
for SDIO device such as SDIO WLAN.

Signed-off-by: Sangwook Lee <sangwook.lee@samsung.com>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
9 years agommc: sdhci-s3c: Add pm_caps into SD/MMC host
Sangwook Lee [Mon, 7 Nov 2011 17:05:22 +0000 (17:05 +0000)]
mmc: sdhci-s3c: Add pm_caps into SD/MMC host

sdhci-s3c updates pm_caps from platform data for SDIO PM.

Signed-off-by: Sangwook Lee <sangwook.lee@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
9 years agommc: allow upper layers to know immediately if card has been removed
Adrian Hunter [Mon, 28 Nov 2011 14:22:00 +0000 (16:22 +0200)]
mmc: allow upper layers to know immediately if card has been removed

Add a function mmc_detect_card_removed() which upper layers can use to
determine immediately if a card has been removed. This function should
be called after an I/O request fails so that all queued I/O requests
can be errored out immediately instead of waiting for the card device
to be removed.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Sujit Reddy Thumma <sthumma@codeaurora.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
9 years agommc: remove the second argument of k[un]map_atomic()
Cong Wang [Sun, 27 Nov 2011 05:27:00 +0000 (13:27 +0800)]
mmc: remove the second argument of k[un]map_atomic()

Signed-off-by: Cong Wang <amwang@redhat.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
9 years agommc: convert drivers/mmc/host/* to use module_platform_driver()
Axel Lin [Sat, 26 Nov 2011 04:55:43 +0000 (12:55 +0800)]
mmc: convert drivers/mmc/host/* to use module_platform_driver()

This patch converts the drivers in drivers/mmc/host/* to use the
module_platform_driver() macro which makes the code smaller and a bit

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: "Michał Mirosław" <mirq-linux@rere.qmqm.pl>
Acked-by: David Brown <davidb@codeaurora.org>
Acked-by: Viresh Kumar <viresh.kumar@st.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Anton Vorontsov <cbouatmailru@gmail.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
9 years agommc: Remove redundant spi driver bus initialization
Lars-Peter Clausen [Thu, 24 Nov 2011 15:29:17 +0000 (16:29 +0100)]
mmc: Remove redundant spi driver bus initialization

In ancient times it was necessary to manually initialize the bus field of an
spi_driver to spi_bus_type. These days this is done in spi_driver_register(),
so we can drop the manual assignment.

The patch was generated using the following coccinelle semantic patch:
// <smpl>
identifier _driver;
struct spi_driver _driver = {
.driver = {
- .bus = &spi_bus_type,
// </smpl>

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
9 years agommc: sh_mmcif: simplify clock divisor calculation
Guennadi Liakhovetski [Wed, 23 Nov 2011 14:52:30 +0000 (15:52 +0100)]
mmc: sh_mmcif: simplify clock divisor calculation

Replace ilog2(__rounddown_pow_of_two(x)) with the equivalent but much
simpler fls(x) - 1.

Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
9 years agommc: core: check for zero length ioctl data
Johan Rudholm [Wed, 23 Nov 2011 08:05:58 +0000 (09:05 +0100)]
mmc: core: check for zero length ioctl data

If the read or write buffer size associated with the command sent
through the mmc_blk_ioctl is zero, do not prepare data buffer.

This enables a ioctl(2) call to for instance send a MMC_SWITCH to set
a byte in the ext_csd.

Signed-off-by: Johan Rudholm <johan.rudholm@stericsson.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
9 years agommc: sdhci-esdhc: Change delay after setting clock from 100ms to 1ms
Tony Lin [Tue, 22 Nov 2011 06:42:30 +0000 (14:42 +0800)]
mmc: sdhci-esdhc: Change delay after setting clock from 100ms to 1ms

1ms is enough for hardware to change the clock to stable.
100ms is too long in the tasklet.

Signed-off-by: Tony Lin <tony.lin@freescale.com>
CC: Xiaobo Xie <X.Xie@freescale.com>
CC: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
9 years agommc: mmc_test: align max_seg_size
Per Forlin [Mon, 14 Nov 2011 11:04:24 +0000 (12:04 +0100)]
mmc: mmc_test: align max_seg_size

If max_seg_size is unaligned, mmc_test_map_sg() may create sg element
sizes that are not aligned with 512 byte. Fix, align max_seg_size at

Signed-off-by: Per Forlin <per.forlin@stericsson.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
9 years agommc: mmci: add capabilities2 for MMC_CAP2
Per Forlin [Mon, 14 Nov 2011 11:02:28 +0000 (12:02 +0100)]
mmc: mmci: add capabilities2 for MMC_CAP2

Signed-off-by: Per Forlin <per.forlin@stericsson.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
9 years agommc: sdio: support SDIO UHS cards
Philip Rakity [Tue, 15 Nov 2011 03:14:38 +0000 (19:14 -0800)]
mmc: sdio: support SDIO UHS cards

This patch adds support for sdio UHS cards per the version 3.0

UHS mode is only enabled for version 3.0 cards when both the
host and the controller support UHS modes.

1.8v signaling support is removed if both the card and the
host do not support UHS.  This is done to maintain
compatibility and some system/card combinations break when
1.8v signaling is enabled when the host does not support UHS.

Signed-off-by: Philip Rakity <prakity@marvell.com>
Signed-off-by: Aaron Lu <Aaron.lu@amd.com>
Reviewed-by: Arindam Nath <arindam.nath@amd.com>
Tested-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
9 years agommc: sdhci-spear: Implement suspend/resume
Viresh Kumar [Tue, 15 Nov 2011 10:54:40 +0000 (16:24 +0530)]
mmc: sdhci-spear: Implement suspend/resume

Suspend/Resume is missing from sdhci-spear driver. This patch adds
support for suspend/resume for this driver.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
9 years agommc: core: Use delayed work in clock gating framework
Sujit Reddy Thumma [Mon, 14 Nov 2011 08:23:29 +0000 (13:53 +0530)]
mmc: core: Use delayed work in clock gating framework

Current clock gating framework disables the MCI clock as soon as the
request is completed and enables it when a request arrives. This aggressive
clock gating framework, when enabled, cause following issues:

When there are back-to-back requests from the Queue layer, we unnecessarily
end up disabling and enabling the clocks between these requests since 8MCLK
clock cycles is a very short duration compared to the time delay between
back to back requests reaching the MMC layer. This overhead can effect the
overall performance depending on how long the clock enable and disable
calls take which is platform dependent. For example on some platforms we
can have clock control not on the local processor, but on a different
subsystem and the time taken to perform the clock enable/disable can add
significant overhead.

Also if the host controller driver decides to disable the host clock too
when mmc_set_ios function is called with ios.clock=0, it adds additional
delay and it is highly possible that the next request had already arrived
and unnecessarily blocked in enabling the clocks. This is seen frequently
when the processor is executing at high speeds and in multi-core platforms
thus reduces the overall throughput compared to if clock gating is

Fix this by delaying turning off the clocks by posting request on
delayed workqueue. Also cancel the unscheduled pending work, if any,
when there is access to card.

sysfs entry is provided to tune the delay as needed, default
value set to 200ms.

Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
9 years agommc: card: Use manufacturer ID symbols in card quirks.
Chris Ball [Sat, 12 Nov 2011 03:01:43 +0000 (22:01 -0500)]
mmc: card: Use manufacturer ID symbols in card quirks.

No functional change; adds macros for card manufacturer IDs.

Signed-off-by: Chris Ball <cjb@laptop.org>
Cc: Andrei E. Warkentin <andrey.warkentin@gmail.com>
Cc: Stefan Nilsson XK <stefan.xk.nilsson@stericsson.com>
9 years agommc: debugfs: expose the SDCLK frq in sys ios
Giuseppe CAVALLARO [Fri, 4 Nov 2011 12:53:19 +0000 (13:53 +0100)]
mmc: debugfs: expose the SDCLK frq in sys ios

This patch is to expose the actual SDCLK frequency in
/sys/kernel/debug/mmcX/ios entry.

For example, if the max clk for a normal speed card is 20MHz this
is reported in /sys/kernel/debug/mmcX/ios.  Unfortunately the actual
SDCLK frequency (i.e. Baseclock / divisor) is not reported at all:
for example, in that case, on Arasan HC, it should be 48/4=12 (MHz).

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
9 years agommc: sdio: Fix to support any block size optimally
Stefan Nilsson XK [Wed, 26 Oct 2011 08:52:17 +0000 (10:52 +0200)]
mmc: sdio: Fix to support any block size optimally

This patch allows any block size to be set on the SDIO link,
and still have an arbitrary sized packet (adjusted in size by
using sdio_align_size) transferred in an optimal way
(preferably one transfer).

Previously if the block size was larger than the default of
512 bytes and the transfer size was exactly one block size
(possibly thanks to using sdio_align_size to get an optimal
transfer size), it was sent as a number of byte transfers instead
of one block transfer. Also if the number of blocks was
(max_blocks * N) + 1, the tranfer would be conducted with a number
of blocks and finished off with a number of byte transfers.

When doing this change it was also possible to break out the quirk
for broken byte mode in a much cleaner way, and collect the logic of
when to do byte or block transfer in one function instead of two.

Signed-off-by: Stefan Nilsson XK <stefan.xk.nilsson@stericsson.com>
Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
9 years agommc: sd: Macro name cleanup for high speed dtr
Qiang Liu [Tue, 8 Nov 2011 13:43:08 +0000 (08:43 -0500)]
mmc: sd: Macro name cleanup for high speed dtr

Add new macros for the high speed 50MHz case, rather than having
a confusing reuse of the value for UHS SDR50, which is 100MHz.

Reported-by: Aaron Lu <aaron.lu@amd.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
9 years agom68k: remove duplicate asm offset for task thread.info
Greg Ungerer [Fri, 2 Sep 2011 04:20:06 +0000 (14:20 +1000)]
m68k: remove duplicate asm offset for task thread.info

We have a duplicate name and definition for the offset of the thread.info
struct within the task struct in our asm-offsets.c code. Remove one of them,
and consolidate to use a single define, TASK_INFO.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
9 years agom68k: merge the init_task code for mmu and non-mmu targets
Greg Ungerer [Tue, 30 Aug 2011 06:11:05 +0000 (16:11 +1000)]
m68k: merge the init_task code for mmu and non-mmu targets

The init_task code can be the same for both mmu and non-mmu targets.
None of the alignment carried out in the the current init_task code
is necessary. The linker script takes care of aligning the init_thread
structure to a THREAD SIZE boundary, and that is all we need.

So use the init_task.c code for all target types, that makes m68k
code consistent with what most other architectures do.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
9 years agom68knommu: remove unused fasthandler declaration
Greg Ungerer [Tue, 30 Aug 2011 05:30:09 +0000 (15:30 +1000)]
m68knommu: remove unused fasthandler declaration

The fasthandler code was removed long ago. Remove the now unused
declaration of it.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
9 years agom68k: Fall back to __gpio_to_irq() for non-arch GPIOs
Mark Brown [Wed, 26 Oct 2011 07:51:55 +0000 (09:51 +0200)]
m68k: Fall back to __gpio_to_irq() for non-arch GPIOs

gpiolib provides __gpio_to_irq() to map gpiolib gpios to interrupts - hook
that up on m68k.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
9 years agoclocksource: m86k: Convert to clocksource_register_hz/khz
john stultz [Tue, 25 Oct 2011 18:46:10 +0000 (11:46 -0700)]
clocksource: m86k: Convert to clocksource_register_hz/khz

Updated to merge the valid bits of the two m68k patches.

This converts the m86k clocksources to use clocksource_register_hz/khz

This is untested, so any assistance in testing would be appreciated!

CC: Geert Uytterhoeven <geert@linux-m68k.org>
CC: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
9 years agoLinux 3.2-rc7
Linus Torvalds [Sat, 24 Dec 2011 05:51:06 +0000 (21:51 -0800)]
Linux 3.2-rc7

9 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Linus Torvalds [Sat, 24 Dec 2011 05:47:28 +0000 (21:47 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  VFS: Fix race between CPU hotplug and lglocks

9 years agoMerge tag 'writeback' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux
Linus Torvalds [Sat, 24 Dec 2011 04:25:36 +0000 (20:25 -0800)]
Merge tag 'writeback' of git://git./linux/kernel/git/wfg/linux

for linus: writeback reason binary tracing format fix

* tag 'writeback' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux:
  writeback: show writeback reason with __print_symbolic

9 years agoMerge branch 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Linus Torvalds [Fri, 23 Dec 2011 23:01:24 +0000 (15:01 -0800)]
Merge branch 'rc-fixes' of git://git./linux/kernel/git/mmarek/kbuild

* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kconfig: adapt update-po-config to new UML layout

9 years agoMerge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab...
Linus Torvalds [Fri, 23 Dec 2011 22:59:08 +0000 (14:59 -0800)]
Merge branch 'v4l_for_linus' of git://git./linux/kernel/git/mchehab/linux-media

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] omap3isp: Fix crash caused by subdevs now having a pointer to devnodes

9 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux...
Linus Torvalds [Fri, 23 Dec 2011 22:58:39 +0000 (14:58 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/mason/linux-btrfs

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: call d_instantiate after all ops are setup
  Btrfs: fix worker lock misuse in find_worker

9 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc
Linus Torvalds [Fri, 23 Dec 2011 22:58:14 +0000 (14:58 -0800)]
Merge git://git./linux/kernel/git/davem/sparc

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc64: Fix MSIQ HV call ordering in pci_sun4v_msiq_build_irq().

9 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Linus Torvalds [Fri, 23 Dec 2011 22:57:55 +0000 (14:57 -0800)]
Merge git://git./linux/kernel/git/davem/net

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  netfilter: xt_connbytes: handle negation correctly
  net: relax rcvbuf limits
  rps: fix insufficient bounds checking in store_rps_dev_flow_table_cnt()
  net: introduce DST_NOPEER dst flag
  mqprio: Avoid panic if no options are provided
  bridge: provide a mtu() method for fake_dst_ops

9 years agoMerge branch 'nf' of git://1984.lsi.us.es/net
David S. Miller [Fri, 23 Dec 2011 19:29:20 +0000 (14:29 -0500)]
Merge branch 'nf' of git://1984.lsi.us.es/net

9 years agonetfilter: xt_connbytes: handle negation correctly
Florian Westphal [Fri, 16 Dec 2011 17:35:15 +0000 (18:35 +0100)]
netfilter: xt_connbytes: handle negation correctly

"! --connbytes 23:42" should match if the packet/byte count is not in range.

As there is no explict "invert match" toggle in the match structure,
userspace swaps the from and to arguments
(i.e., as if "--connbytes 42:23" were given).

However, "what <= 23 && what >= 42" will always be false.

Change things so we use "||" in case "from" is larger than "to".

This change may look like it breaks backwards compatibility when "to" is 0.
However, older iptables binaries will refuse "connbytes 42:0",
and current releases treat it to mean "! --connbytes 0:42",
so we should be fine.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
9 years agoBtrfs: call d_instantiate after all ops are setup
Al Viro [Fri, 23 Dec 2011 12:58:13 +0000 (07:58 -0500)]
Btrfs: call d_instantiate after all ops are setup

This closes races where btrfs is calling d_instantiate too soon during
inode creation.  All of the callers of btrfs_add_nondir are updated to
instantiate after the inode is fully setup in memory.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
9 years agoBtrfs: fix worker lock misuse in find_worker
Chris Mason [Fri, 23 Dec 2011 12:53:00 +0000 (07:53 -0500)]
Btrfs: fix worker lock misuse in find_worker

Dan Carpenter noticed that we were doing a double unlock on the worker
lock, and sometimes picking a worker thread without the lock held.

This fixes both errors.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
9 years agonet: relax rcvbuf limits
Eric Dumazet [Wed, 21 Dec 2011 07:11:44 +0000 (07:11 +0000)]
net: relax rcvbuf limits

skb->truesize might be big even for a small packet.

Its even bigger after commit 87fb4b7b533 (net: more accurate skb
truesize) and big MTU.

We should allow queueing at least one packet per receiver, even with a
low RCVBUF setting.

Reported-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agorps: fix insufficient bounds checking in store_rps_dev_flow_table_cnt()
Xi Wang [Thu, 22 Dec 2011 13:35:22 +0000 (13:35 +0000)]
rps: fix insufficient bounds checking in store_rps_dev_flow_table_cnt()

Setting a large rps_flow_cnt like (1 << 30) on 32-bit platform will
cause a kernel oops due to insufficient bounds checking.

if (count > 1<<30) {
/* Enforce a limit to prevent overflow */
return -EINVAL;
count = roundup_pow_of_two(count);
table = vmalloc(RPS_DEV_FLOW_TABLE_SIZE(count));

Note that the macro RPS_DEV_FLOW_TABLE_SIZE(count) is defined as:

... + (count * sizeof(struct rps_dev_flow))

where sizeof(struct rps_dev_flow) is 8.  (1 << 30) * 8 will overflow
32 bits.

This patch replaces the magic number (1 << 30) with a symbolic bound.

Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet: introduce DST_NOPEER dst flag
Eric Dumazet [Thu, 22 Dec 2011 04:15:53 +0000 (04:15 +0000)]
net: introduce DST_NOPEER dst flag

Chris Boot reported crashes occurring in ipv6_select_ident().

[  461.457562] RIP: 0010:[<ffffffff812dde61>]  [<ffffffff812dde61>]

[  461.578229] Call Trace:
[  461.580742] <IRQ>
[  461.582870]  [<ffffffff812efa7f>] ? udp6_ufo_fragment+0x124/0x1a2
[  461.589054]  [<ffffffff812dbfe0>] ? ipv6_gso_segment+0xc0/0x155
[  461.595140]  [<ffffffff812700c6>] ? skb_gso_segment+0x208/0x28b
[  461.601198]  [<ffffffffa03f236b>] ? ipv6_confirm+0x146/0x15e
[  461.608786]  [<ffffffff81291c4d>] ? nf_iterate+0x41/0x77
[  461.614227]  [<ffffffff81271d64>] ? dev_hard_start_xmit+0x357/0x543
[  461.620659]  [<ffffffff81291cf6>] ? nf_hook_slow+0x73/0x111
[  461.626440]  [<ffffffffa0379745>] ? br_parse_ip_options+0x19a/0x19a
[  461.633581]  [<ffffffff812722ff>] ? dev_queue_xmit+0x3af/0x459
[  461.639577]  [<ffffffffa03747d2>] ? br_dev_queue_push_xmit+0x72/0x76
[  461.646887]  [<ffffffffa03791e3>] ? br_nf_post_routing+0x17d/0x18f
[  461.653997]  [<ffffffff81291c4d>] ? nf_iterate+0x41/0x77
[  461.659473]  [<ffffffffa0374760>] ? br_flood+0xfa/0xfa [bridge]
[  461.665485]  [<ffffffff81291cf6>] ? nf_hook_slow+0x73/0x111
[  461.671234]  [<ffffffffa0374760>] ? br_flood+0xfa/0xfa [bridge]
[  461.677299]  [<ffffffffa0379215>] ?
nf_bridge_update_protocol+0x20/0x20 [bridge]
[  461.684891]  [<ffffffffa03bb0e5>] ? nf_ct_zone+0xa/0x17 [nf_conntrack]
[  461.691520]  [<ffffffffa0374760>] ? br_flood+0xfa/0xfa [bridge]
[  461.697572]  [<ffffffffa0374812>] ? NF_HOOK.constprop.8+0x3c/0x56
[  461.704616]  [<ffffffffa0379031>] ?
nf_bridge_push_encap_header+0x1c/0x26 [bridge]
[  461.712329]  [<ffffffffa037929f>] ? br_nf_forward_finish+0x8a/0x95
[  461.719490]  [<ffffffffa037900a>] ?
nf_bridge_pull_encap_header+0x1c/0x27 [bridge]
[  461.727223]  [<ffffffffa0379974>] ? br_nf_forward_ip+0x1c0/0x1d4 [bridge]
[  461.734292]  [<ffffffff81291c4d>] ? nf_iterate+0x41/0x77
[  461.739758]  [<ffffffffa03748cc>] ? __br_deliver+0xa0/0xa0 [bridge]
[  461.746203]  [<ffffffff81291cf6>] ? nf_hook_slow+0x73/0x111
[  461.751950]  [<ffffffffa03748cc>] ? __br_deliver+0xa0/0xa0 [bridge]
[  461.758378]  [<ffffffffa037533a>] ? NF_HOOK.constprop.4+0x56/0x56

This is caused by bridge netfilter special dst_entry (fake_rtable), a
special shared entry, where attaching an inetpeer makes no sense.

Problem is present since commit 87c48fa3b46 (ipv6: make fragment
identifications less predictable)

Introduce DST_NOPEER dst flag and make sure ipv6_select_ident() and
__ip_select_ident() fallback to the 'no peer attached' handling.

Reported-by: Chris Boot <bootc@bootc.net>
Tested-by: Chris Boot <bootc@bootc.net>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agomqprio: Avoid panic if no options are provided
Thomas Graf [Thu, 22 Dec 2011 02:05:07 +0000 (02:05 +0000)]
mqprio: Avoid panic if no options are provided

Userspace may not provide TCA_OPTIONS, in fact tc currently does
so not do so if no arguments are specified on the command line.
Return EINVAL instead of panicing.

Signed-off-by: Thomas Graf <tgraf@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agobridge: provide a mtu() method for fake_dst_ops
Eric Dumazet [Wed, 21 Dec 2011 20:00:32 +0000 (20:00 +0000)]
bridge: provide a mtu() method for fake_dst_ops

Commit 618f9bc74a039da76 (net: Move mtu handling down to the protocol
depended handlers) forgot the bridge netfilter case, adding a NULL
dereference in ip_fragment().

Reported-by: Chris Boot <bootc@bootc.net>
CC: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoMerge branch 'for-linus' of git://neil.brown.name/md
Linus Torvalds [Thu, 22 Dec 2011 23:36:17 +0000 (15:36 -0800)]
Merge branch 'for-linus' of git://neil.brown.name/md

* 'for-linus' of git://neil.brown.name/md:
  md/bitmap: It is OK to clear bits during recovery.
  md: don't give up looking for spares on first failure-to-add
  md/raid5: ensure correct assessment of drives during degraded reshape.
  md/linear: fix hot-add of devices to linear arrays.

9 years agomd/bitmap: It is OK to clear bits during recovery.
NeilBrown [Thu, 22 Dec 2011 22:57:48 +0000 (09:57 +1100)]
md/bitmap: It is OK to clear bits during recovery.

commit d0a4bb492772ce5c4bdfba3744a99ed6f6fb238f introduced a
regression which is annoying but fairly harmless.

When writing to an array that is undergoing recovery (a spare
in being integrated into the array), writing to the array will
set bits in the bitmap, but they will not be cleared when the
write completes.

For bits covering areas that have not been recovered yet this is not a
problem as the recovery will clear the bits.  However bits set in
already-recovered region will stay set and never be cleared.
This doesn't risk data integrity.  The only negatives are:
 - next time there is a crash, more resyncing than necessary will
   be done.
 - the bitmap doesn't look clean, which is confusing.

While an array is recovering we don't want to update the
'events_cleared' setting in the bitmap but we do still want to clear
bits that have very recently been set - providing they were written to
the recovering device.

So split those two needs - which previously both depended on 'success'
and always clear the bit of the write went to all devices.

Signed-off-by: NeilBrown <neilb@suse.de>
9 years agomd: don't give up looking for spares on first failure-to-add
NeilBrown [Thu, 22 Dec 2011 22:57:19 +0000 (09:57 +1100)]
md: don't give up looking for spares on first failure-to-add

Before performing a recovery we try to remove any spares that
might not be working, then add any that might have become relevant.

Currently we abort on the first spare that cannot be added.
This is a false optimisation.
It is conceivable that - depending on rules in the personality - a
subsequent spare might be accepted.
Also the loop does other things like count the available spares and
reset the 'recovery_offset' value.

If we abort early these might not happen properly.

So remove the early abort.

In particular if you have an array what is undergoing recovery and
which has extra spares, then the recovery may not restart after as
reboot as the could of 'spares' might end up as zero.

Reported-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: NeilBrown <neilb@suse.de>
9 years agomd/raid5: ensure correct assessment of drives during degraded reshape.
NeilBrown [Thu, 22 Dec 2011 22:57:00 +0000 (09:57 +1100)]
md/raid5: ensure correct assessment of drives during degraded reshape.

While reshaping a degraded array (as when reshaping a RAID0 by first
converting it to a degraded RAID4) we currently get confused about
which devices are in_sync.  In most cases we get it right, but in the
region that is being reshaped we need to treat non-failed devices as
in-sync when we have the data but haven't actually written it out yet.

Reported-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
9 years agomd/linear: fix hot-add of devices to linear arrays.
NeilBrown [Thu, 22 Dec 2011 22:56:55 +0000 (09:56 +1100)]
md/linear: fix hot-add of devices to linear arrays.

commit d70ed2e4fafdbef0800e73942482bb075c21578b
broke hot-add to a linear array.
After that commit, metadata if not written to devices until they
have been fully integrated into the array as determined by
saved_raid_disk.  That patch arranged to clear that field after
a recovery completed.

However for linear arrays, there is no recovery - the integration is
instantaneous.  So we need to explicitly clear the saved_raid_disk

Signed-off-by: NeilBrown <neilb@suse.de>
9 years agosparc64: Fix MSIQ HV call ordering in pci_sun4v_msiq_build_irq().
David S. Miller [Thu, 22 Dec 2011 21:23:59 +0000 (13:23 -0800)]
sparc64: Fix MSIQ HV call ordering in pci_sun4v_msiq_build_irq().

This silently was working for many years and stopped working on
Niagara-T3 machines.

We need to set the MSIQ to VALID before we can set it's state to IDLE.

On Niagara-T3, setting the state to IDLE first was causing HV_EINVAL
errors.  The hypervisor documentation says, rather ambiguously, that
the MSIQ must be "initialized" before one can set the state.

I previously understood this to mean merely that a successful setconf()
operation has been performed on the MSIQ, which we have done at this
point.  But it seems to also mean that it has been set VALID too.

Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoMerge branch 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Linus Torvalds [Thu, 22 Dec 2011 20:59:47 +0000 (12:59 -0800)]
Merge branch 'usb-linus' of git://git./linux/kernel/git/gregkh/usb

* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: Fix usb/isp1760 build on sparc
  usb: gadget: epautoconf: do not change number of streams
  usb: dwc3: core: fix cached revision on our structure
  usb: musb: fix reset issue with full speed device

9 years agoMerge branch 'upstream-linus' of git://github.com/jgarzik/libata-dev
Linus Torvalds [Thu, 22 Dec 2011 20:53:32 +0000 (12:53 -0800)]
Merge branch 'upstream-linus' of git://github.com/jgarzik/libata-dev

* 'upstream-linus' of git://github.com/jgarzik/libata-dev:
  pata_of_platform: Add missing CONFIG_OF_IRQ dependency.

9 years agopata_of_platform: Add missing CONFIG_OF_IRQ dependency.
David Miller [Wed, 21 Dec 2011 22:38:10 +0000 (17:38 -0500)]
pata_of_platform: Add missing CONFIG_OF_IRQ dependency.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
9 years agoipv4: using prefetch requires including prefetch.h
Stephen Rothwell [Thu, 22 Dec 2011 06:03:29 +0000 (17:03 +1100)]
ipv4: using prefetch requires including prefetch.h

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: David Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agoVFS: Fix race between CPU hotplug and lglocks
Srivatsa S. Bhat [Wed, 21 Dec 2011 21:15:29 +0000 (02:45 +0530)]
VFS: Fix race between CPU hotplug and lglocks

Currently, the *_global_[un]lock_online() routines are not at all synchronized
with CPU hotplug. Soft-lockups detected as a consequence of this race was
reported earlier at https://lkml.org/lkml/2011/8/24/185. (Thanks to Cong Meng
for finding out that the root-cause of this issue is the race condition
between br_write_[un]lock() and CPU hotplug, which results in the lock states
getting messed up).

Fixing this race by just adding {get,put}_online_cpus() at appropriate places
in *_global_[un]lock_online() is not a good option, because, then suddenly
br_write_[un]lock() would become blocking, whereas they have been kept as
non-blocking all this time, and we would want to keep them that way.

So, overall, we want to ensure 3 things:
1. br_write_lock() and br_write_unlock() must remain as non-blocking.
2. The corresponding lock and unlock of the per-cpu spinlocks must not happen
   for different sets of CPUs.
3. Either prevent any new CPU online operation in between this lock-unlock, or
   ensure that the newly onlined CPU does not proceed with its corresponding
   per-cpu spinlock unlocked.

To achieve all this:
(a) We introduce a new spinlock that is taken by the *_global_lock_online()
    routine and released by the *_global_unlock_online() routine.
(b) We register a callback for CPU hotplug notifications, and this callback
    takes the same spinlock as above.
(c) We maintain a bitmap which is close to the cpu_online_mask, and once it is
    initialized in the lock_init() code, all future updates to it are done in
    the callback, under the above spinlock.
(d) The above bitmap is used (instead of cpu_online_mask) while locking and
    unlocking the per-cpu locks.

The callback takes the spinlock upon the CPU_UP_PREPARE event. So, if the
br_write_lock-unlock sequence is in progress, the callback keeps spinning,
thus preventing the CPU online operation till the lock-unlock sequence is
complete. This takes care of requirement (3).

The bitmap that we maintain remains unmodified throughout the lock-unlock
sequence, since all updates to it are managed by the callback, which takes
the same spinlock as the one taken by the lock code and released only by the
unlock routine. Combining this with (d) above, satisfies requirement (2).

Overall, since we use a spinlock (mentioned in (a)) to prevent CPU hotplug
operations from racing with br_write_lock-unlock, requirement (1) is also
taken care of.

By the way, it is to be noted that a CPU offline operation can actually run
in parallel with our lock-unlock sequence, because our callback doesn't react
to notifications earlier than CPU_DEAD (in order to maintain our bitmap
properly). And this means, since we use our own bitmap (which is stale, on
purpose) during the lock-unlock sequence, we could end up unlocking the
per-cpu lock of an offline CPU (because we had locked it earlier, when the
CPU was online), in order to satisfy requirement (2). But this is harmless,
though it looks a bit awkward.

Debugged-by: Cong Meng <mc@linux.vnet.ibm.com>
Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@vger.kernel.org
9 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Linus Torvalds [Thu, 22 Dec 2011 02:29:26 +0000 (18:29 -0800)]
Merge git://git./linux/kernel/git/davem/net

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  net: Add a flow_cache_flush_deferred function
  ipv4: reintroduce route cache garbage collector
  net: have ipconfig not wait if no dev is available
  sctp: Do not account for sizeof(struct sk_buff) in estimated rwnd
  asix: new device id
  davinci-cpdma: fix locking issue in cpdma_chan_stop
  sctp: fix incorrect overflow check on autoclose
  r8169: fix Config2 MSIEnable bit setting.
  llc: llc_cmsg_rcv was getting called after sk_eat_skb.
  net: bpf_jit: fix an off-one bug in x86_64 cond jump target
  iwlwifi: update SCD BC table for all SCD queues
  Revert "Bluetooth: Revert: Fix L2CAP connection establishment"
  Bluetooth: Clear RFCOMM session timer when disconnecting last channel
  Bluetooth: Prevent uninitialized data access in L2CAP configuration
  iwlwifi: allow to switch to HT40 if not associated
  iwlwifi: tx_sync only on PAN context
  mwifiex: avoid double list_del in command cancel path
  ath9k: fix max phy rate at rate control init
  nfc: signedness bug in __nci_request()
  iwlwifi: do not set the sequence control bit is not needed

9 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Linus Torvalds [Thu, 22 Dec 2011 02:29:05 +0000 (18:29 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: atmel/ac97c: using software reset instead hardware reset if not available

9 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6
Linus Torvalds [Thu, 22 Dec 2011 02:28:52 +0000 (18:28 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/sameo/mfd-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6:
  mfd: Include linux/io.h to jz4740-adc
  mfd: Use request_threaded_irq for twl4030-irq instead of irq_set_chained_handler
  mfd: Base interrupt for twl4030-irq must be one-shot
  mfd: Handle tps65910 clear-mask correctly
  mfd: add #ifdef CONFIG_DEBUG_FS guard for ab8500_debug_resources
  mfd: Fix twl-core oops while calling twl_i2c_* for unbound driver
  mfd: include linux/module.h for ab5500-debugfs
  mfd: Update wm8994 active device checks for WM1811
  mfd: Set tps6586x bits if new value is different from the old one
  mfd: Set da903x bits if new value is different from the old one
  mfd: Set adp5520 bits if new value is different from the old one
  mfd: Add missed free_irq in da903x_remove

9 years agovfs: __read_cache_page should use gfp argument rather than GFP_KERNEL
Dave Kleikamp [Wed, 21 Dec 2011 17:05:48 +0000 (11:05 -0600)]
vfs: __read_cache_page should use gfp argument rather than GFP_KERNEL

lockdep reports a deadlock in jfs because a special inode's rw semaphore
is taken recursively.  The mapping's gfp mask is GFP_NOFS, but is not
used when __read_cache_page() calls add_to_page_cache_lru().

Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agoMerge branch 'for-greg' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb...
Greg Kroah-Hartman [Wed, 21 Dec 2011 22:42:17 +0000 (14:42 -0800)]
Merge branch 'for-greg' of git://git./linux/kernel/git/balbi/usb into usb-linus

* 'for-greg' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb:
  usb: gadget: epautoconf: do not change number of streams
  usb: dwc3: core: fix cached revision on our structure
  usb: musb: fix reset issue with full speed device

9 years agoUSB: Fix usb/isp1760 build on sparc
David Miller [Wed, 21 Dec 2011 22:31:54 +0000 (17:31 -0500)]
USB: Fix usb/isp1760 build on sparc

This commit:

commit 8f5d621543cb064d2989fc223d3c2bc61a43981e
Author: Joachim Foerster <joachim.foerster@missinglinkelectronics.com>
Date:   Mon Oct 10 18:06:54 2011 +0200

    usb/isp1760: Let OF bindings depend on general CONFIG_OF instead of PPC_OF .

    To be able to use the driver on other OF-aware architectures, too.
    And add necessary OF related #includes to fix compilation error.

Signed-off-by: Joachim Foerster <joachim.foerster@missinglinkelectronics.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
enabled the build on all CONFIG_OF architectures, but it cannot do

This driver depends upon CONFIG_OF_IRQ but not all CONFIG_OF platforms
support that infrastructure, in particular Sparc does not so the
build fails.

Please push a patch like the following to Linus so that this code only
gets built where it actually should.

usb/isp1760: Add missing CONFIG_OF_IRQ dependency on OF code.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
9 years agonet: Add a flow_cache_flush_deferred function
Steffen Klassert [Wed, 21 Dec 2011 21:48:08 +0000 (16:48 -0500)]
net: Add a flow_cache_flush_deferred function

flow_cach_flush() might sleep but can be called from
atomic context via the xfrm garbage collector. So add
a flow_cache_flush_deferred() function and use this if
the xfrm garbage colector is invoked from within the
packet path.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Acked-by: Timo Teräs <timo.teras@iki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoipv4: reintroduce route cache garbage collector
Eric Dumazet [Wed, 21 Dec 2011 20:47:16 +0000 (15:47 -0500)]
ipv4: reintroduce route cache garbage collector

Commit 2c8cec5c10b (ipv4: Cache learned PMTU information in inetpeer)
removed IP route cache garbage collector a bit too soon, as this gc was
responsible for expired routes cleanup, releasing their neighbour

As pointed out by Robert Gladewitz, recent kernels can fill and exhaust
their neighbour cache.

Reintroduce the garbage collection, since we'll have to wait our
neighbour lookups become refcount-less to not depend on this stuff.

Reported-by: Robert Gladewitz <gladewitz@gmx.de>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...
John W. Linville [Wed, 21 Dec 2011 18:18:22 +0000 (13:18 -0500)]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless into for-davem

9 years agofirmware: Refer to the co-maintained linux-firmware.git repository
Ben Hutchings [Wed, 21 Dec 2011 03:54:24 +0000 (03:54 +0000)]
firmware: Refer to the co-maintained linux-firmware.git repository

David and I are sharing maintenance of this repository.  Patches
should be sent to both of us.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agoMerge git://git.infradead.org/mtd-2.6
Linus Torvalds [Wed, 21 Dec 2011 02:39:37 +0000 (18:39 -0800)]
Merge git://git.infradead.org/mtd-2.6

* git://git.infradead.org/mtd-2.6:
  mtd: plat_ram: call mtd_device_register only if partition data exists
  mtd: pxa2xx-flash.c: It used to fall back to provided table.
  mtd: gpmi: add missing include 'module.h'
  mtd: ndfc: fix typo in structure dereference

9 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc
Linus Torvalds [Wed, 21 Dec 2011 02:31:34 +0000 (18:31 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/cjb/mmc

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc:
  mmc: vub300: fix type of firmware_rom_wait_states module parameter
  Revert "mmc: enable runtime PM by default"
  mmc: sdhci: remove "state" argument from sdhci_suspend_host

9 years agoSELinux: Fix RCU deref check warning in sel_netport_insert()
David Howells [Tue, 13 Dec 2011 14:49:04 +0000 (14:49 +0000)]
SELinux: Fix RCU deref check warning in sel_netport_insert()

Fix the following bug in sel_netport_insert() where rcu_dereference() should
be rcu_dereference_protected() as sel_netport_lock is held.

[ INFO: suspicious rcu_dereference_check() usage. ]
security/selinux/netport.c:127 invoked rcu_dereference_check() without protection!

other info that might help us debug this:

rcu_scheduler_active = 1, debug_locks = 0
1 lock held by ossec-rootcheck/3323:
 #0:  (sel_netport_lock){+.....}, at: [<ffffffff8117d775>] sel_netport_sid+0xbb/0x226

stack backtrace:
Pid: 3323, comm: ossec-rootcheck Not tainted 3.1.0-rc8-fsdevel+ #1095
Call Trace:
 [<ffffffff8105cfb7>] lockdep_rcu_dereference+0xa7/0xb0
 [<ffffffff8117d871>] sel_netport_sid+0x1b7/0x226
 [<ffffffff8117d6ba>] ? sel_netport_avc_callback+0xbc/0xbc
 [<ffffffff8117556c>] selinux_socket_bind+0x115/0x230
 [<ffffffff810a5388>] ? might_fault+0x4e/0x9e
 [<ffffffff810a53d1>] ? might_fault+0x97/0x9e
 [<ffffffff81171cf4>] security_socket_bind+0x11/0x13
 [<ffffffff812ba967>] sys_bind+0x56/0x95
 [<ffffffff81380dac>] ? sysret_check+0x27/0x62
 [<ffffffff8105b767>] ? trace_hardirqs_on_caller+0x11e/0x155
 [<ffffffff81076fcd>] ? audit_syscall_entry+0x17b/0x1ae
 [<ffffffff811b5eae>] ? trace_hardirqs_on_thunk+0x3a/0x3f
 [<ffffffff81380d7b>] system_call_fastpath+0x16/0x1b

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: stable@kernel.org
Signed-off-by: James Morris <jmorris@namei.org>