]> git.openfabrics.org - ~shefty/rdma-dev.git/log
~shefty/rdma-dev.git
9 years agoBluetooth: Check if the hci connection exists in SCO shutdown
Gustavo Padovan [Thu, 3 Jan 2013 21:59:28 +0000 (19:59 -0200)]
Bluetooth: Check if the hci connection exists in SCO shutdown

Checking only for sco_conn seems to not be enough and lead to NULL
dereferences in the code, check for hcon instead.

<1>[11340.226404] BUG: unable to handle kernel NULL pointer dereference at
0000000
8
<4>[11340.226619] EIP is at __sco_sock_close+0xe8/0x1a0
<4>[11340.226629] EAX: f063a740 EBX: 00000000 ECX: f58f4544 EDX: 00000000
<4>[11340.226640] ESI: dec83e00 EDI: 5f9a081f EBP: e0fdff38 ESP: e0fdff1c
<0>[11340.226674] Stack:
<4>[11340.226682]  c184db87 c1251028 dec83e00 e0fdff38 c1754aef dec83e00
00000000
e0fdff5c
<4>[11340.226718]  c184f587 e0fdff64 e0fdff68 5f9a081f e0fdff5c c1751852
d7813800
62262f10
<4>[11340.226752]  e0fdff70 c1753c00 00000000 00000001 0000000d e0fdffac
c175425c
00000041
<0>[11340.226793] Call Trace:
<4>[11340.226813]  [<c184db87>] ? sco_sock_clear_timer+0x27/0x60
<4>[11340.226831]  [<c1251028>] ? local_bh_enable+0x68/0xd0
<4>[11340.226846]  [<c1754aef>] ? lock_sock_nested+0x4f/0x60
<4>[11340.226862]  [<c184f587>] sco_sock_shutdown+0x67/0xb0
<4>[11340.226879]  [<c1751852>] ? sockfd_lookup_light+0x22/0x80
<4>[11340.226897]  [<c1753c00>] sys_shutdown+0x30/0x60
<4>[11340.226912]  [<c175425c>] sys_socketcall+0x1dc/0x2a0
<4>[11340.226929]  [<c149ba78>] ? trace_hardirqs_on_thunk+0xc/0x10
<4>[11340.226944]  [<c18860f1>] syscall_call+0x7/0xb
<4>[11340.226960]  [<c1880000>] ? restore_cur+0x5e/0xd7
<0>[11340.226969] Code: <f0> ff 4b 08 0f 94 c0 84 c0 74 20 80 7b 19 01 74
2f b8 0a 00 00

Reported-by: Chuansheng Liu <chuansheng.liu@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
9 years agoBluetooth: Fix authentication if acl data comes before remote feature evt
Jaganath Kanakkassery [Thu, 10 Jan 2013 04:58:35 +0000 (10:28 +0530)]
Bluetooth: Fix authentication if acl data comes before remote feature evt

If remote device sends l2cap info request before read_remote_ext_feature
completes then mgmt_connected will be sent in hci_acldata_packet() and
remote name request wont be sent and eventually authentication wont happen

Hcidump log of the issue

< HCI Command: Create Connection (0x01|0x0005) plen 13
    bdaddr BC:85:1F:74:7F:29 ptype 0xcc18 rswitch 0x01 clkoffset 0x4bf7 (valid)
    Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> HCI Event: Command Status (0x0f) plen 4
    Create Connection (0x01|0x0005) status 0x00 ncmd 1
> HCI Event: Connect Complete (0x03) plen 11
    status 0x00 handle 12 bdaddr BC:85:1F:74:7F:29 type ACL encrypt 0x00
< HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
    handle 12
> HCI Event: Command Status (0x0f) plen 4
    Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 1
> HCI Event: Read Remote Supported Features (0x0b) plen 11
    status 0x00 handle 12
    Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87
> HCI Event: Max Slots Change (0x1b) plen 3
    handle 12 slots 5
< HCI Command: Read Remote Extended Features (0x01|0x001c) plen 3
    handle 12 page 1
> HCI Event: Command Status (0x0f) plen 4
    Read Remote Extended Features (0x01|0x001c) status 0x00 ncmd 1
> ACL data: handle 12 flags 0x02 dlen 10
    L2CAP(s): Info req: type 2
< ACL data: handle 12 flags 0x00 dlen 16
    L2CAP(s): Info rsp: type 2 result 0
      Extended feature mask 0x00b8
        Enhanced Retransmission mode
        Streaming mode
        FCS Option
        Fixed Channels
> HCI Event: Read Remote Extended Features (0x23) plen 13
    status 0x00 handle 12 page 1 max 1
    Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00
> ACL data: handle 12 flags 0x02 dlen 10
    L2CAP(s): Info req: type 3
< ACL data: handle 12 flags 0x00 dlen 20
    L2CAP(s): Info rsp: type 3 result 0
      Fixed channel list 0x00000002
        L2CAP Signalling Channel
> HCI Event: Number of Completed Packets (0x13) plen 5
    handle 12 packets 2

This patch moves sending mgmt_connected from hci_acldata_packet() to
l2cap_connect_req() since this code is to handle the scenario remote
device sends l2cap connect req too fast

Signed-off-by: Jaganath Kanakkassery <jaganath.k@samsung.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
9 years agoBluetooth device 04ca:3008 should use ath3k
Sergio Cambra [Thu, 10 Jan 2013 00:06:55 +0000 (01:06 +0100)]
Bluetooth device 04ca:3008 should use ath3k

Output of /sys/kernel/debug/usb/devices
T:  Bus=03 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  6 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=04ca ProdID=3008 Rev= 0.02
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms

Signed-off-by: Sergio Cambra <sergio@programatica.es>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
9 years agoBluetooth: Fix incorrect strncpy() in hidp_setup_hid()
Anderson Lizardo [Sun, 6 Jan 2013 22:28:53 +0000 (18:28 -0400)]
Bluetooth: Fix incorrect strncpy() in hidp_setup_hid()

The length parameter should be sizeof(req->name) - 1 because there is no
guarantee that string provided by userspace will contain the trailing
'\0'.

Can be easily reproduced by manually setting req->name to 128 non-zero
bytes prior to ioctl(HIDPCONNADD) and checking the device name setup on
input subsystem:

$ cat /sys/devices/pnp0/00\:04/tty/ttyS0/hci0/hci0\:1/input8/name
AAAAAA[...]AAAAAAAAf0:af:f0:af:f0:af

("f0:af:f0:af:f0:af" is the device bluetooth address, taken from "phys"
field in struct hid_device due to overflow.)

Cc: stable@vger.kernel.org
Signed-off-by: Anderson Lizardo <anderson.lizardo@openbossa.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
9 years agoBluetooth: Add support for Foxconn / Hon Hai [0489:e056]
AceLan Kao [Thu, 3 Jan 2013 04:25:00 +0000 (12:25 +0800)]
Bluetooth: Add support for Foxconn / Hon Hai [0489:e056]

Add support for the AR9462 chip

T: Bus=01 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0489 ProdID=e056 Rev=00.01
C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
9 years agoBluetooth: Add support for Foxconn / Hon Hai [0489:e04e]
AceLan Kao [Thu, 3 Jan 2013 04:24:59 +0000 (12:24 +0800)]
Bluetooth: Add support for Foxconn / Hon Hai [0489:e04e]

Add support for the AR9462 chip

T:  Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  5 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0489 ProdID=e04e Rev=00.02
C:  #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I:  If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
9 years agoBluetooth: Add support for GC-WB300D PCIe [04ca:3006] to ath3k.
Daniel Schaal [Sat, 29 Dec 2012 10:14:34 +0000 (11:14 +0100)]
Bluetooth: Add support for GC-WB300D PCIe [04ca:3006] to ath3k.

T:  Bus=02 Lev=02 Prnt=02 Port=06 Cnt=01 Dev#=  4 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=04ca ProdID=3006 Rev= 0.02
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms

Signed-off-by: Daniel Schaal <farbing@web.de>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
9 years agoBluetooth: Add support for IMC Networks [13d3:3393]
AceLan Kao [Tue, 11 Dec 2012 03:41:20 +0000 (11:41 +0800)]
Bluetooth: Add support for IMC Networks [13d3:3393]

Add support for the AR9462 chip

T:  Bus=02 Lev=02 Prnt=02 Port=04 Cnt=01 Dev#=  3 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=13d3 ProdID=3393 Rev=00.01
C:  #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I:  If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
9 years agoBluetooth: Fix sending HCI commands after reset
Szymon Janc [Tue, 11 Dec 2012 07:51:19 +0000 (08:51 +0100)]
Bluetooth: Fix sending HCI commands after reset

After sending reset command wait for its command complete event before
sending next command. Some chips sends CC event for command received
before reset if reset was send before chip replied with CC.

This is also required by specification that host shall not send
additional HCI commands before receiving CC for reset.

< HCI Command: Reset (0x03|0x0003) plen 0                              [hci0] 18.404612
> HCI Event: Command Complete (0x0e) plen 4                            [hci0] 18.405850
      Write Extended Inquiry Response (0x03|0x0052) ncmd 1
        Status: Success (0x00)
< HCI Command: Read Local Supported Features (0x04|0x0003) plen 0      [hci0] 18.406079
> HCI Event: Command Complete (0x0e) plen 4                            [hci0] 18.407864
      Reset (0x03|0x0003) ncmd 1
        Status: Success (0x00)
< HCI Command: Read Local Supported Features (0x04|0x0003) plen 0      [hci0] 18.408062
> HCI Event: Command Complete (0x0e) plen 12                           [hci0] 18.408835

Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Cc: stable@vger.kernel.org
Acked-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
9 years agob43: Fix firmware loading when driver is built into the kernel
Larry Finger [Thu, 20 Dec 2012 21:55:01 +0000 (15:55 -0600)]
b43: Fix firmware loading when driver is built into the kernel

Recent versions of udev cause synchronous firmware loading from the
probe routine to fail because the request to user space would time
out. The original fix for b43 (commit 6b6fa58) moved the firmware
load from the probe routine to a work queue, but it still used synchronous
firmware loading. This method is OK when b43 is built as a module;
however, it fails when the driver is compiled into the kernel.

This version changes the code to load the initial firmware file
using request_firmware_nowait(). A completion event is used to
hold the work queue until that file is available. This driver
reads several firmware files - the remainder can be read synchronously.
On some test systems, the async read fails; however, a following synch
read works, thus the async failure falls through to the sync try.

Reported-and-Tested by: Felix Janda <felix.janda@posteo.de>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.kernel.org> (V3.4+)
Signed-off-by: John W. Linville <linville@tuxdriver.com>
9 years agodrivers/net/wireless/iwlegacy: use strlcpy instead of strncpy
Chen Gang [Mon, 7 Jan 2013 04:42:46 +0000 (12:42 +0800)]
drivers/net/wireless/iwlegacy: use strlcpy instead of strncpy

  The fields must be null-terminated, or simple_strtoul will cause issue.

Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
9 years agodrivers/net/wireless/mwl8k.c: avoid use-after-free
Nickolai Zeldovich [Mon, 7 Jan 2013 01:27:22 +0000 (20:27 -0500)]
drivers/net/wireless/mwl8k.c: avoid use-after-free

Do not dereference p->station_id after kfree(cmd) because p
points into the cmd data structure.

Signed-off-by: Nickolai Zeldovich <nickolai@csail.mit.edu>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
9 years agortlwifi: Fix typo in debug output of rtl8192c and rtl8723ae
Julian Wollrath [Wed, 2 Jan 2013 14:21:56 +0000 (15:21 +0100)]
rtlwifi: Fix typo in debug output of rtl8192c and rtl8723ae

Signed-off-by: Julian Wollrath <jwollrath@web.de>
Acked-by: Larry Finger <Larry.finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
9 years agowireless: add new wil6210 802.11ad 60GHz driver
Vladimir Kondratiev [Thu, 20 Dec 2012 21:13:19 +0000 (13:13 -0800)]
wireless: add new wil6210 802.11ad 60GHz driver

This adds support for the 60 GHz 802.11ad Wilocity card
through a new driver, wil6210. Wilocity implemented the
firmware, QCA maintains the device driver.

Currently supported:

- STA: with security
- AP: limited to 1 connected STA, security disabled
- Monitor: due to a hardware/firmware limitation
  either control or non-control frames are monitored

Using a STA and AP with this drive, one can assemble
a fully functional BSS. Throughput of 1.2Gbps is achieved
with iperf.

The wil6210 cards have on-board flash memory for the
firmware, the cards comes pre-flashed and no firmware
download is required.

For more details see:

http://wireless.kernel.org/en/users/Drivers/wil6210

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
9 years agomwifiex: fix typo in setting up ibss network parameters
Amitkumar Karwar [Thu, 3 Jan 2013 01:32:19 +0000 (17:32 -0800)]
mwifiex: fix typo in setting up ibss network parameters

commit 683b6d3... "cfg80211: pass a channel definition struct"
accidentally changed "==" to "!=".

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
9 years agomwifiex: check wait_event_interruptible return value
Bing Zhao [Thu, 3 Jan 2013 00:07:35 +0000 (16:07 -0800)]
mwifiex: check wait_event_interruptible return value

wait_event_interruptible function returns -ERESTARTSYS if it's
interrupted by a signal. Driver should check the return value
and handle this case properly.

In mwifiex_wait_queue_complete() routine, as we are now checking
wait_event_interruptible return value, the condition check is not
required. Also, we have removed mwifiex_cancel_pending_ioctl()
call to avoid a chance of sending second command to FW by other path
as soon as we clear current command node. FW can not handle two
commands simultaneously.

Cc: "3.6+" <stable@vger.kernel.org>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
9 years agoMerge branch 'for-john' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi...
John W. Linville [Fri, 4 Jan 2013 21:06:11 +0000 (16:06 -0500)]
Merge branch 'for-john' of git://git./linux/kernel/git/iwlwifi/iwlwifi-fixes

9 years agoMerge branch 'for-john' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
John W. Linville [Fri, 4 Jan 2013 21:05:14 +0000 (16:05 -0500)]
Merge branch 'for-john' of git://git./linux/kernel/git/jberg/mac80211

9 years agoath9k: Fix Kconfig for ATH9K_HTC
Vladimir Kondratiev [Thu, 3 Jan 2013 08:31:19 +0000 (10:31 +0200)]
ath9k: Fix Kconfig for ATH9K_HTC

Ath9k consists of 2 different sub-modules: ATH9K and ATH9K_HTC.
Both uses common Atheros code from ath.ko and need ATH_COMMON.

However, while ATH9K selects ATH_COMMON, ATH9K_HTC does not.
As result, if ATH9K_HTC is the only Atheros card selected, compilation fails with
unresolved symbols.

This patch moves ATH_COMMON selection to the common part for both
ATH9K and ATH9K_HTC

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
9 years agoiwlwifi: fix the reclaimed packet tracking upon flush queue
Emmanuel Grumbach [Mon, 31 Dec 2012 07:26:10 +0000 (09:26 +0200)]
iwlwifi: fix the reclaimed packet tracking upon flush queue

There's a bug in the currently released firmware version,
the sequence control in the Tx response isn't updated in
all cases. Take it from the packet as a workaround.

Cc: stable@vger.kernel.org
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
9 years agoiwlwifi: fix PCIe interrupt handle return value
Johannes Berg [Thu, 27 Dec 2012 20:37:04 +0000 (21:37 +0100)]
iwlwifi: fix PCIe interrupt handle return value

By accident, commit eb6476441bc2fecf6232a87d0313a85f8e3da7f4
("iwlwifi: protect use_ict with irq_lock") changed the return
value of the iwl_pcie_isr() function in case it handles an
interrupt -- it now returns IRQ_NONE instead of IRQ_HANDLED.

Put back the correct return value.

Cc: stable@vger.kernel.org
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
9 years agomac80211: fix maximum MTU
Chaitanya [Fri, 21 Dec 2012 11:45:17 +0000 (17:15 +0530)]
mac80211: fix maximum MTU

The maximum MTU shouldn't take the headers into account,
the maximum MSDU size is exactly the maximum MTU.

Signed-off-by: T Krishna Chaitanya <chaitanyatk@posedge.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
9 years agomac80211: fix dtim_period in hidden SSID AP association
Johannes Berg [Mon, 10 Dec 2012 14:38:14 +0000 (16:38 +0200)]
mac80211: fix dtim_period in hidden SSID AP association

When AP's SSID is hidden the BSS can appear several times in
cfg80211's BSS list: once with a zero-length SSID that comes
from the beacon, and once for each SSID from probe reponses.

Since the mac80211 stores its data in ieee80211_bss which
is embedded into cfg80211_bss, mac80211's data will be
duplicated too.

This becomes a problem when a driver needs the dtim_period
since this data exists only in the beacon's instance in
cfg80211 bss table which isn't the instance that is used
when associating.

Remove the DTIM period from the BSS table and track it
explicitly to avoid this problem.

Cc: stable@vger.kernel.org
Tested-by: Efi Tubul <efi.tubul@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
9 years agomac80211: use del_timer_sync for final sta cleanup timer deletion
Johannes Berg [Thu, 13 Dec 2012 22:08:52 +0000 (23:08 +0100)]
mac80211: use del_timer_sync for final sta cleanup timer deletion

This is a very old bug, but there's nothing that prevents the
timer from running while the module is being removed when we
only do del_timer() instead of del_timer_sync().

The timer should normally not be running at this point, but
it's not clearly impossible (or we could just remove this.)

Cc: stable@vger.kernel.org
Tested-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
9 years agomac80211: fix station destruction in AP/mesh modes
Johannes Berg [Thu, 13 Dec 2012 21:54:58 +0000 (22:54 +0100)]
mac80211: fix station destruction in AP/mesh modes

Unfortunately, commit b22cfcfcae5b, intended to speed up roaming
by avoiding the synchronize_rcu() broke AP/mesh modes as it moved
some code into that work item that will still call into the driver
at a time where it's no longer expected to handle this: after the
AP or mesh has been stopped.

To fix this problem remove the per-station work struct, maintain a
station cleanup list instead and flush this list when stations are
flushed. To keep this patch smaller for stable, do this when the
stations are flushed (sta_info_flush()). This unfortunately brings
back the original roaming delay; I'll fix that again in a separate
patch.

Also, Ben reported that the original commit could sometimes (with
many interfaces) cause long delays when an interface is set down,
due to blocking on flush_workqueue(). Since we now maintain the
cleanup list, this particular change of the original patch can be
reverted.

Cc: stable@vger.kernel.org [3.7]
Reported-by: Ben Greear <greearb@candelatech.com>
Tested-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
9 years agomac80211: RMC buckets are just list heads
Thomas Pedersen [Tue, 18 Dec 2012 02:41:57 +0000 (18:41 -0800)]
mac80211: RMC buckets are just list heads

The array of rmc_entrys is redundant since only the
list_head is used. Make this an array of list_heads
instead and save ~6k per vif at runtime :D

Signed-off-by: Thomas Pedersen <thomas@cozybit.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
9 years agomac80211: assign VLAN channel contexts
Johannes Berg [Tue, 11 Dec 2012 19:38:41 +0000 (20:38 +0100)]
mac80211: assign VLAN channel contexts

Make AP_VLAN type interfaces track the AP master channel
context so they have one assigned for the various lookups.
Don't give them their own refcount etc. since they're just
slaves to the AP master.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
9 years agomac80211: flush AP_VLAN stations when tearing down the BSS AP
Felix Fietkau [Mon, 10 Dec 2012 19:02:34 +0000 (20:02 +0100)]
mac80211: flush AP_VLAN stations when tearing down the BSS AP

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
[change to flush stations with AP flush in second loop]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
9 years agomac80211: fix ibss scanning
Stanislaw Gruszka [Tue, 11 Dec 2012 09:48:23 +0000 (10:48 +0100)]
mac80211: fix ibss scanning

Do not scan on no-IBSS and disabled channels in IBSS mode. Doing this
can trigger Microcode errors on iwlwifi and iwlegacy drivers.

Also rename ieee80211_request_internal_scan() function since it is only
used in IBSS mode and simplify calling it from ieee80211_sta_find_ibss().

This patch should address:
https://bugzilla.redhat.com/show_bug.cgi?id=883414
https://bugzilla.kernel.org/show_bug.cgi?id=49411

Reported-by: Jesse Kahtava <jesse_kahtava@f-m.fm>
Reported-by: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: stable@vger.kernel.org
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
9 years agobrcmfmac: fix parsing rsn ie for ap mode.
Hante Meuleman [Wed, 2 Jan 2013 14:12:39 +0000 (15:12 +0100)]
brcmfmac: fix parsing rsn ie for ap mode.

RSN IEs got incorrectly parsed and therefore ap mode using WPA2
security was not working.

Cc: stable@vger.kernel.org
Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
9 years agobrcmsmac: add copyright information for Canonical
Arend van Spriel [Wed, 2 Jan 2013 14:12:38 +0000 (15:12 +0100)]
brcmsmac: add copyright information for Canonical

Patches from Canonical involved the introduction of new source
files debug.[ch]. That coincided with other patches from Broadcom
introducing the same files.

Cc: Seth Forshee <seth.forshee@canonical.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Piotr Haber <phaber@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
9 years agortlwifi: rtl8723ae: Fix warning for unchecked pci_map_single() call
Larry Finger [Thu, 27 Dec 2012 16:37:32 +0000 (10:37 -0600)]
rtlwifi: rtl8723ae: Fix warning for unchecked pci_map_single() call

Kernel 3.8 implements checking of all DMA mapping calls and issues
a WARNING for the first it finds that is not checked.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
9 years agortlwifi: rtl8192se: Fix warning for unchecked pci_map_single() call
Larry Finger [Thu, 27 Dec 2012 16:37:31 +0000 (10:37 -0600)]
rtlwifi: rtl8192se: Fix warning for unchecked pci_map_single() call

Kernel 3.8 implements checking of all DMA mapping calls and issues
a WARNING for the first it finds that is not checked.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
9 years agortlwifi: rtl8192de: Fix warning for unchecked pci_map_single() call
Larry Finger [Thu, 27 Dec 2012 16:37:30 +0000 (10:37 -0600)]
rtlwifi: rtl8192de: Fix warning for unchecked pci_map_single() call

Kernel 3.8 implements checking of all DMA mapping calls and issues
a WARNING for the first it finds that is not checked.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
9 years agortlwifi: rtl8192ce: Fix warning for unchecked pci_map_single() call
Larry Finger [Thu, 27 Dec 2012 16:37:29 +0000 (10:37 -0600)]
rtlwifi: rtl8192ce: Fix warning for unchecked pci_map_single() call

Kernel 3.8 implements checking of all DMA mapping calls and issues
a WARNING for the first it finds that is not checked.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
9 years agortlwifi: Fix warning for unchecked pci_map_single() call
Larry Finger [Thu, 27 Dec 2012 16:37:28 +0000 (10:37 -0600)]
rtlwifi: Fix warning for unchecked pci_map_single() call

Kernel 3.8 implements checking of all DMA mapping calls and issues
a WARNING for the first it finds that is not checked.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
9 years agop54usb: add USBIDs for two more p54usb devices
Christian Lamparter [Thu, 27 Dec 2012 14:18:20 +0000 (15:18 +0100)]
p54usb: add USBIDs for two more p54usb devices

This patch adds USBIDs for:
- DrayTek Vigor 530
- Zoom 4410a

It also adds a note about Gemtek WUBI-100GW
and SparkLAN WL-682 USBID conflict [WUBI-100GW
is a ISL3886+NET2280 (LM86 firmare) solution,
whereas WL-682 is a ISL3887 (LM87 firmware)]
device.

Source: <http://www.wikidevi.com/wiki/Intersil/p54/usb/windows>

Cc: <stable@vger.kernel.org>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
9 years agortlwifi: Don't leak on error in _rtl_usb_receive()
Jesper Juhl [Wed, 26 Dec 2012 20:51:12 +0000 (21:51 +0100)]
rtlwifi: Don't leak on error in _rtl_usb_receive()

We fail to release 'urb' if '_rtl_prep_rx_urb()' fails in
_rtl_usb_receive().
This patch should take care of the leak.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
9 years agoath9k_hw: Fix RX gain initvals for AR9485
Sujith Manoharan [Wed, 26 Dec 2012 06:57:39 +0000 (12:27 +0530)]
ath9k_hw: Fix RX gain initvals for AR9485

Populate iniModesRxGain with the correct initvals
array for AR9485 v1.1

Cc: stable@vger.kernel.org
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
9 years agobcma: correct M25P32 serial flash ID
Rafał Miłecki [Tue, 25 Dec 2012 21:34:22 +0000 (22:34 +0100)]
bcma: correct M25P32 serial flash ID

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
9 years agobrcmsmac: Use udelay instead of usleep_range
Niels Ole Salscheider [Mon, 24 Dec 2012 12:07:36 +0000 (13:07 +0100)]
brcmsmac: Use udelay instead of usleep_range

wlc_lcnphy_rx_iq_cal_gain is called during initialization, i. e. when
executing brcms_up.
But brcms_up is called from brcms_ops_start while the latter holds a spin lock.
Thus, we cannot use usleep_range but have to use udelay.

This fixes:
BUG: scheduling while atomic: NetworkManager/1652/0x00000200
[...]
Call Trace:
 [<ffffffff81582522>] __schedule_bug+0x48/0x54
 [<ffffffff815892b6>] __schedule+0x596/0x6d0
 [<ffffffff81589719>] schedule+0x29/0x70
 [<ffffffff8158893c>] schedule_hrtimeout_range_clock+0xfc/0x140
 [<ffffffff81060f10>] ? update_rmtp+0x70/0x70
 [<ffffffff81588993>] schedule_hrtimeout_range+0x13/0x20
 [<ffffffff810495e0>] usleep_range+0x40/0x50
 [<ffffffffa05dedcb>] wlc_lcnphy_rx_iq_cal.constprop.10+0x59b/0xa90 [brcmsmac]
 [<ffffffffa05df4ce>] wlc_lcnphy_periodic_cal+0x20e/0x220 [brcmsmac]
 [<ffffffffa05dce8d>] ? wlc_lcnphy_set_tx_pwr_ctrl+0x21d/0x3c0 [brcmsmac]
 [<ffffffffa05e0cfc>] wlc_phy_init_lcnphy+0xacc/0x1100 [brcmsmac]
 [<ffffffffa05e0230>] ? wlc_phy_txpower_recalc_target_lcnphy+0x90/0x90 [brcmsmac]
 [<ffffffffa05d7c7d>] wlc_phy_init+0xcd/0x170 [brcmsmac]
 [<ffffffffa05c9dfe>] brcms_b_bsinit.isra.65+0x12e/0x310 [brcmsmac]
 [<ffffffffa05d061b>] brcms_c_init+0x8fb/0x1170 [brcmsmac]
 [<ffffffffa05c3a0a>] brcms_init+0x5a/0x70 [brcmsmac]
 [<ffffffffa05ce76c>] brcms_c_up+0x1ac/0x4a0 [brcmsmac]
 [<ffffffffa05c3c65>] brcms_up+0x25/0x30 [brcmsmac]
 [<ffffffffa05c44c0>] brcms_ops_start+0xd0/0x100 [brcmsmac]
[...]

Signed-off-by: Niels Ole Salscheider <niels_ole@salscheider-online.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
9 years agop54usb: add USB ID for T-Com Sinus 154 data II
Tomasz Guszkowski [Sat, 22 Dec 2012 17:30:01 +0000 (18:30 +0100)]
p54usb: add USB ID for T-Com Sinus 154 data II

Added USB ID for T-Com Sinus 154 data II.

Cc: <stable@vger.kernel.org>
Signed-off-by: Tomasz Guszkowski <tsg@o2.pl>
Acked-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
9 years agocarl9170: fix -EINVAL bailout during init with !CONFIG_MAC80211_MESH
Christian Lamparter [Sat, 22 Dec 2012 03:35:24 +0000 (04:35 +0100)]
carl9170: fix -EINVAL bailout during init with !CONFIG_MAC80211_MESH

Sean reported that as of 3.7, his AR9170 device no longer works
because the driver fails during initialization. He noted this
is due to:
"In carl9170/fw.c, ar->hw->wiphy is tagged with
NL80211_IFTYPE_MESH_POINT support if the firmware has Content
after Beacon Queuing. This is both in interface_modes and the
only iface_combinations entry.

If CONFIG_MAC80211_MESH is not set, ieee80211_register_hw
removes NL80211_IFTYPE_MESH_POINT from interface_modes, but
not iface_combinations.

wiphy_register then checks to see if every interface type in
every interface combination is in interface_modes.
NL80211_IFTYPE_MESH_POINT was removed, so you get a WARN_ON
warning and it returns -EINVAL, giving up."

Unfortunately, the iface_combination (types) feature bitmap
in ieee80211_iface_limit is part of a const member in the
ieee80211_iface_combination struct. Hence, the MESH_POINT
feature flag can't be masked by wiphy_register in the
same way as interface_modes in ieee80211_register_hw.

Cc: <stable@vger.kernel.org>
Reported-by: Sean Patrick Santos <quantheory@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Tested-by: Sean Patrick Santos <quantheory@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
9 years agortlwifi: fix incorrect use of usb_alloc_coherent with usb_control_msg
Jussi Kivilinna [Thu, 20 Dec 2012 14:24:43 +0000 (16:24 +0200)]
rtlwifi: fix incorrect use of usb_alloc_coherent with usb_control_msg

Incorrect use of usb_alloc_coherent memory as input buffer to usb_control_msg
can cause problems in arch DMA code, for example kernel BUG at
'arch/arm/include/asm/dma-mapping.h:321' on ARM (linux-3.4).

Change _usb_writeN_sync use kmalloc'd buffer instead.

Cc: stable@vger.kernel.org
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
9 years agoath9k: Fix compilation breakage
Sujith Manoharan [Thu, 20 Dec 2012 03:08:00 +0000 (08:38 +0530)]
ath9k: Fix compilation breakage

Since ath9k makes use of mac80211's debugfs hooks to
maintain station statistics, make ATH9K_DEBUGFS
select MAC80211_DEBUGFS. This fixes the issue reported by
Fengguang Wu:

drivers/net/wireless/ath/ath9k/debug.c: In function 'ath9k_sta_add_debugfs':
drivers/net/wireless/ath/ath9k/debug.c:1589:4: error: 'struct ath_node' has no member named 'node_stat'
drivers/net/wireless/ath/ath9k/debug.c: In function 'ath9k_sta_remove_debugfs':
drivers/net/wireless/ath/ath9k/debug.c:1599:19: error: 'struct ath_node' has no member named 'node_stat'

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
9 years agossb: SSB_DRIVER_GPIO should depend on GPIOLIB instead of selecting it
Geert Uytterhoeven [Sun, 16 Dec 2012 15:35:36 +0000 (16:35 +0100)]
ssb: SSB_DRIVER_GPIO should depend on GPIOLIB instead of selecting it

Commit ec43b08b5733494ad88aa618ecdf534320dd8207 ("ssb: add GPIO driver")
added SSB_DRIVER_GPIO, which unconditionally selects GPIOLIB, causing
a Kconfig warning:

warning: (ARCH_REQUIRE_GPIOLIB && SSB_DRIVER_GPIO && BCMA_DRIVER_GPIO && MFD_TC6393XB && FB_VIA) selects GPIOLIB which has unmet direct dependencies (ARCH_WANT_OPTIONAL_GPIOLIB || ARCH_REQUIRE_GPIOLIB)

and build failure for m68k/allmodconfig:

In file included from drivers/ssb/ssb_private.h:5,
                 from drivers/ssb/main.c:12:
include/linux/ssb/ssb.h:440: error: field ‘gpio’ has incomplete type
make[4]: *** [drivers/ssb/main.o] Error 1
make[3]: *** [drivers/ssb/] Error 2

Turn the select into a dependency to fix this.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
9 years agobcma: BCMA_DRIVER_GPIO should depend on GPIOLIB instead of selecting it
Geert Uytterhoeven [Sun, 16 Dec 2012 15:35:35 +0000 (16:35 +0100)]
bcma: BCMA_DRIVER_GPIO should depend on GPIOLIB instead of selecting it

Commit cf0936b06d8e98a157630e99f647e2ff6d29d7ad ("bcma: add GPIO driver")
added BCMA_DRIVER_GPIO, which unconditionally selects GPIOLIB, causing
a Kconfig warning:

warning: (ARCH_REQUIRE_GPIOLIB && SSB_DRIVER_GPIO && BCMA_DRIVER_GPIO && MFD_TC6393XB && FB_VIA) selects GPIOLIB which has unmet direct dependencies (ARCH_WANT_OPTIONAL_GPIOLIB || ARCH_REQUIRE_GPIOLIB)

and build failure for m68k/allmodconfig:

In file included from include/linux/bcma/bcma.h:8,
                 from drivers/bcma/bcma_private.h:9,
                 from drivers/bcma/main.c:9:
include/linux/bcma/bcma_driver_chipcommon.h:582: error: field ‘gpio’ has incomplete type
In file included from include/linux/bcma/bcma.h:12,
                 from drivers/bcma/bcma_private.h:9,
                 from drivers/bcma/main.c:9:
include/linux/ssb/ssb.h:440: error: field ‘gpio’ has incomplete type
make[4]: *** [drivers/bcma/main.o] Error 1
make[3]: *** [drivers/bcma/] Error 2

Turn the select into a dependency to fix this.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
9 years agoLinux 3.8-rc1
Linus Torvalds [Sat, 22 Dec 2012 01:19:00 +0000 (17:19 -0800)]
Linux 3.8-rc1

9 years agoMerge git://www.linux-watchdog.org/linux-watchdog
Linus Torvalds [Sat, 22 Dec 2012 01:10:29 +0000 (17:10 -0800)]
Merge git://www.linux-watchdog.org/linux-watchdog

Pull watchdog updates from Wim Van Sebroeck:
 "This includes some fixes and code improvements (like
  clk_prepare_enable and clk_disable_unprepare), conversion from the
  omap_wdt and twl4030_wdt drivers to the watchdog framework, addition
  of the SB8x0 chipset support and the DA9055 Watchdog driver and some
  OF support for the davinci_wdt driver."

* git://www.linux-watchdog.org/linux-watchdog: (22 commits)
  watchdog: mei: avoid oops in watchdog unregister code path
  watchdog: Orion: Fix possible null-deference in orion_wdt_probe
  watchdog: sp5100_tco: Add SB8x0 chipset support
  watchdog: davinci_wdt: add OF support
  watchdog: da9052: Fix invalid free of devm_ allocated data
  watchdog: twl4030_wdt: Change TWL4030_MODULE_PM_RECEIVER to TWL_MODULE_PM_RECEIVER
  watchdog: remove depends on CONFIG_EXPERIMENTAL
  watchdog: Convert dev_printk(KERN_<LEVEL> to dev_<level>(
  watchdog: DA9055 Watchdog driver
  watchdog: omap_wdt: eliminate goto
  watchdog: omap_wdt: delete redundant platform_set_drvdata() calls
  watchdog: omap_wdt: convert to devm_ functions
  watchdog: omap_wdt: convert to new watchdog core
  watchdog: WatchDog Timer Driver Core: fix comment
  watchdog: s3c2410_wdt: use clk_prepare_enable and clk_disable_unprepare
  watchdog: imx2_wdt: Select the driver via ARCH_MXC
  watchdog: cpu5wdt.c: add missing del_timer call
  watchdog: hpwdt.c: Increase version string
  watchdog: Convert twl4030_wdt to watchdog core
  davinci_wdt: preparation for switch to common clock framework
  ...

9 years agoMerge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6
Linus Torvalds [Sat, 22 Dec 2012 01:09:07 +0000 (17:09 -0800)]
Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6

Pull CIFS fixes from Steve French:
 "Misc small cifs fixes"

* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: eliminate cifsERROR variable
  cifs: don't compare uniqueids in cifs_prime_dcache unless server inode numbers are in use
  cifs: fix double-free of "string" in cifs_parse_mount_options

9 years agoMerge tag 'dm-3.8-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm
Linus Torvalds [Sat, 22 Dec 2012 01:08:06 +0000 (17:08 -0800)]
Merge tag 'dm-3.8-fixes' of git://git./linux/kernel/git/agk/linux-dm

Pull dm update from Alasdair G Kergon:
 "Miscellaneous device-mapper fixes, cleanups and performance
  improvements.

  Of particular note:
   - Disable broken WRITE SAME support in all targets except linear and
     striped.  Use it when kcopyd is zeroing blocks.
   - Remove several mempools from targets by moving the data into the
     bio's new front_pad area(which dm calls 'per_bio_data').
   - Fix a race in thin provisioning if discards are misused.
   - Prevent userspace from interfering with the ioctl parameters and
     use kmalloc for the data buffer if it's small instead of vmalloc.
   - Throttle some annoying error messages when I/O fails."

* tag 'dm-3.8-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm: (36 commits)
  dm stripe: add WRITE SAME support
  dm: remove map_info
  dm snapshot: do not use map_context
  dm thin: dont use map_context
  dm raid1: dont use map_context
  dm flakey: dont use map_context
  dm raid1: rename read_record to bio_record
  dm: move target request nr to dm_target_io
  dm snapshot: use per_bio_data
  dm verity: use per_bio_data
  dm raid1: use per_bio_data
  dm: introduce per_bio_data
  dm kcopyd: add WRITE SAME support to dm_kcopyd_zero
  dm linear: add WRITE SAME support
  dm: add WRITE SAME support
  dm: prepare to support WRITE SAME
  dm ioctl: use kmalloc if possible
  dm ioctl: remove PF_MEMALLOC
  dm persistent data: improve improve space map block alloc failure message
  dm thin: use DMERR_LIMIT for errors
  ...

9 years agoRevert "nfsd: warn on odd reply state in nfsd_vfs_read"
J. Bruce Fields [Sat, 22 Dec 2012 00:48:59 +0000 (19:48 -0500)]
Revert "nfsd: warn on odd reply state in nfsd_vfs_read"

This reverts commit 79f77bf9a4e3dd5ead006b8f17e7c4ff07d8374e.

This is obviously wrong, and I have no idea how I missed seeing the
warning in testing: I must just not have looked at the right logs.  The
caller bumps rq_resused/rq_next_page, so it will always be hit on a
large enough read.

Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agoMerge tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland...
Linus Torvalds [Sat, 22 Dec 2012 00:40:26 +0000 (16:40 -0800)]
Merge tag 'rdma-for-linus' of git://git./linux/kernel/git/roland/infiniband

Pull more infiniband changes from Roland Dreier:
 "Second batch of InfiniBand/RDMA changes for 3.8:
   - cxgb4 changes to fix lookup engine hash collisions
   - mlx4 changes to make flow steering usable
   - fix to IPoIB to avoid pinning dst reference for too long"

* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  RDMA/cxgb4: Fix bug for active and passive LE hash collision path
  RDMA/cxgb4: Fix LE hash collision bug for passive open connection
  RDMA/cxgb4: Fix LE hash collision bug for active open connection
  mlx4_core: Allow choosing flow steering mode
  mlx4_core: Adjustments to Flow Steering activation logic for SR-IOV
  mlx4_core: Fix error flow in the flow steering wrapper
  mlx4_core: Add QPN enforcement for flow steering rules set by VFs
  cxgb4: Add LE hash collision bug fix path in LLD driver
  cxgb4: Add T4 filter support
  IPoIB: Call skb_dst_drop() once skb is enqueued for sending

9 years agoMerge tag 'asm-generic' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm...
Linus Torvalds [Sat, 22 Dec 2012 00:39:08 +0000 (16:39 -0800)]
Merge tag 'asm-generic' of git://git./linux/kernel/git/arnd/asm-generic

Pull asm-generic cleanup from Arnd Bergmann:
 "These are a few cleanups for asm-generic:

   - a set of patches from Lars-Peter Clausen to generalize asm/mmu.h
     and use it in the architectures that don't need any special
     handling.
   - A patch from Will Deacon to remove the {read,write}s{b,w,l} as
     discussed during the arm64 review
   - A patch from James Hogan that helps with the meta architecture
     series."

* tag 'asm-generic' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  xtensa: Use generic asm/mmu.h for nommu
  h8300: Use generic asm/mmu.h
  c6x: Use generic asm/mmu.h
  asm-generic/mmu.h: Add support for FDPIC
  asm-generic/mmu.h: Remove unused vmlist field from mm_context_t
  asm-generic: io: remove {read,write} string functions
  asm-generic/io.h: remove asm/cacheflush.h include

9 years agoARM: dts: fix duplicated build target and alphabetical sort out for exynos
Kukjin Kim [Fri, 21 Dec 2012 18:02:13 +0000 (10:02 -0800)]
ARM: dts: fix duplicated build target and alphabetical sort out for exynos

Commit db5b0ae00712 ("Merge tag 'dt' of git://git.kernel.org/.../arm-soc")
causes a duplicated build target.  This patch fixes it and sorts out the
build target alphabetically so that we can recognize something wrong
easily.

Cc: Olof Johansson <olof@lixom.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agodm stripe: add WRITE SAME support
Mike Snitzer [Fri, 21 Dec 2012 20:23:41 +0000 (20:23 +0000)]
dm stripe: add WRITE SAME support

Rename stripe_map_discard to stripe_map_range and reuse it for WRITE
SAME bio processing.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
9 years agodm: remove map_info
Mikulas Patocka [Fri, 21 Dec 2012 20:23:41 +0000 (20:23 +0000)]
dm: remove map_info

This patch removes map_info from bio-based device mapper targets.
map_info is still used for request-based targets.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
9 years agodm snapshot: do not use map_context
Mikulas Patocka [Fri, 21 Dec 2012 20:23:41 +0000 (20:23 +0000)]
dm snapshot: do not use map_context

Eliminate struct map_info from dm-snap.

map_info->ptr was used in dm-snap to indicate if the bio was tracked.
If map_info->ptr was non-NULL, the bio was linked in tracked_chunk_hash.

This patch removes the use of map_info->ptr. We determine if the bio was
tracked based on hlist_unhashed(&c->node). If hlist_unhashed is true,
the bio is not tracked, if it is false, the bio is tracked.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
9 years agodm thin: dont use map_context
Mikulas Patocka [Fri, 21 Dec 2012 20:23:40 +0000 (20:23 +0000)]
dm thin: dont use map_context

This patch removes endio_hook_pool from dm-thin and uses per-bio data instead.

This patch removes any use of map_info in preparation for the next patch
that removes map_info from bio-based device mapper.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
9 years agodm raid1: dont use map_context
Mikulas Patocka [Fri, 21 Dec 2012 20:23:40 +0000 (20:23 +0000)]
dm raid1: dont use map_context

Don't use map_info any more in dm-raid1.

map_info was used for writes to hold the region number. For this purpose
we add a new field dm_bio_details to dm_raid1_bio_record.

map_info was used for reads to hold a pointer to dm_raid1_bio_record (if
the pointer was non-NULL, bio details were saved; if the pointer was
NULL, bio details were not saved). We use
dm_raid1_bio_record.details->bi_bdev for this purpose. If bi_bdev is
NULL, details were not saved, if bi_bdev is non-NULL, details were
saved.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
9 years agodm flakey: dont use map_context
Mikulas Patocka [Fri, 21 Dec 2012 20:23:39 +0000 (20:23 +0000)]
dm flakey: dont use map_context

Replace map_info with a per-bio structure "struct per_bio_data" in dm-flakey.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
9 years agodm raid1: rename read_record to bio_record
Mikulas Patocka [Fri, 21 Dec 2012 20:23:39 +0000 (20:23 +0000)]
dm raid1: rename read_record to bio_record

Rename struct read_record to bio_record in dm-raid1.

In the following patch, the structure will be used for both read and
write bios, so rename it.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
9 years agodm: move target request nr to dm_target_io
Mikulas Patocka [Fri, 21 Dec 2012 20:23:39 +0000 (20:23 +0000)]
dm: move target request nr to dm_target_io

This patch moves target_request_nr from map_info to dm_target_io and
makes it accessible with dm_bio_get_target_request_nr.

This patch is a preparation for the next patch that removes map_info.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
9 years agodm snapshot: use per_bio_data
Mikulas Patocka [Fri, 21 Dec 2012 20:23:38 +0000 (20:23 +0000)]
dm snapshot: use per_bio_data

Replace tracked_chunk_pool with per_bio_data in dm-snap.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
9 years agodm verity: use per_bio_data
Mikulas Patocka [Fri, 21 Dec 2012 20:23:38 +0000 (20:23 +0000)]
dm verity: use per_bio_data

Replace io_mempool with per_bio_data in dm-verity.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
9 years agodm raid1: use per_bio_data
Mikulas Patocka [Fri, 21 Dec 2012 20:23:38 +0000 (20:23 +0000)]
dm raid1: use per_bio_data

Replace read_record_pool with per_bio_data in dm-raid1.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
9 years agodm: introduce per_bio_data
Mikulas Patocka [Fri, 21 Dec 2012 20:23:38 +0000 (20:23 +0000)]
dm: introduce per_bio_data

Introduce a field per_bio_data_size in struct dm_target.

Targets can set this field in the constructor. If a target sets this
field to a non-zero value, "per_bio_data_size" bytes of auxiliary data
are allocated for each bio submitted to the target. These data can be
used for any purpose by the target and help us improve performance by
removing some per-target mempools.

Per-bio data is accessed with dm_per_bio_data. The
argument data_size must be the same as the value per_bio_data_size in
dm_target.

If the target has a pointer to per_bio_data, it can get a pointer to
the bio with dm_bio_from_per_bio_data() function (data_size must be the
same as the value passed to dm_per_bio_data).

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
9 years agodm kcopyd: add WRITE SAME support to dm_kcopyd_zero
Mike Snitzer [Fri, 21 Dec 2012 20:23:37 +0000 (20:23 +0000)]
dm kcopyd: add WRITE SAME support to dm_kcopyd_zero

Add WRITE SAME support to dm-io and make it accessible to
dm_kcopyd_zero().  dm_kcopyd_zero() provides an asynchronous interface
whereas the blkdev_issue_write_same() interface is synchronous.

WRITE SAME is a SCSI command that can be leveraged for more efficient
zeroing of a specified logical extent of a device which supports it.
Only a single zeroed logical block is transfered to the target for each
WRITE SAME and the target then writes that same block across the
specified extent.

The dm thin target uses this.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
9 years agodm linear: add WRITE SAME support
Mike Snitzer [Fri, 21 Dec 2012 20:23:37 +0000 (20:23 +0000)]
dm linear: add WRITE SAME support

The linear target can already support WRITE SAME requests so signal
this by setting num_write_same_requests to 1.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
9 years agodm: add WRITE SAME support
Mike Snitzer [Fri, 21 Dec 2012 20:23:37 +0000 (20:23 +0000)]
dm: add WRITE SAME support

WRITE SAME bios have a payload that contain a single page.  When
cloning WRITE SAME bios DM has no need to modify the bi_io_vec
attributes (and doing so would be detrimental).  DM need only alter the
start and end of the WRITE SAME bio accordingly.

Rather than duplicate __clone_and_map_discard, factor out a common
function that is also used by __clone_and_map_write_same.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
9 years agodm: prepare to support WRITE SAME
Mike Snitzer [Fri, 21 Dec 2012 20:23:36 +0000 (20:23 +0000)]
dm: prepare to support WRITE SAME

Allow targets to opt in to WRITE SAME support by setting
'num_write_same_requests' in the dm_target structure.

A dm device will only advertise WRITE SAME support if all its
targets and all its underlying devices support it.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
9 years agodm ioctl: use kmalloc if possible
Mikulas Patocka [Fri, 21 Dec 2012 20:23:36 +0000 (20:23 +0000)]
dm ioctl: use kmalloc if possible

If the parameter buffer is small enough, try to allocate it with kmalloc()
rather than vmalloc().

vmalloc is noticeably slower than kmalloc because it has to manipulate
page tables.

In my tests, on PA-RISC this patch speeds up activation 13 times.
On Opteron this patch speeds up activation by 5%.

This patch introduces a new function free_params() to free the
parameters and this uses new flags that record whether or not vmalloc()
was used and whether or not the input buffer must be wiped after use.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
9 years agodm ioctl: remove PF_MEMALLOC
Mikulas Patocka [Fri, 21 Dec 2012 20:23:36 +0000 (20:23 +0000)]
dm ioctl: remove PF_MEMALLOC

When allocating memory for the userspace ioctl data, set some
appropriate GPF flags directly instead of using PF_MEMALLOC.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
9 years agodm persistent data: improve improve space map block alloc failure message
Joe Thornber [Fri, 21 Dec 2012 20:23:36 +0000 (20:23 +0000)]
dm persistent data: improve improve space map block alloc failure message

Improve space map error message when unable to allocate a new
metadata block.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
9 years agodm thin: use DMERR_LIMIT for errors
Mike Snitzer [Fri, 21 Dec 2012 20:23:34 +0000 (20:23 +0000)]
dm thin: use DMERR_LIMIT for errors

Throttle all errors logged from the IO path by dm thin.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
9 years agodm persistent data: use DMERR_LIMIT for errors
Mike Snitzer [Fri, 21 Dec 2012 20:23:34 +0000 (20:23 +0000)]
dm persistent data: use DMERR_LIMIT for errors

Nearly all of persistent-data is in the IO path so throttle error
messages with DMERR_LIMIT to limit the amount logged when
something has gone wrong.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
9 years agodm block manager: reinstate message when validator fails
Mike Snitzer [Fri, 21 Dec 2012 20:23:34 +0000 (20:23 +0000)]
dm block manager: reinstate message when validator fails

Reinstate a useful error message when the block manager buffer validator fails.
This was mistakenly eliminated when the block manager was converted to use
dm-bufio.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
9 years agodm raid: round region_size to power of two
Jonathan Brassow [Fri, 21 Dec 2012 20:23:33 +0000 (20:23 +0000)]
dm raid: round region_size to power of two

If the user does not supply a bitmap region_size to the dm raid target,
a reasonable size is computed automatically.  If this is not a power of 2,
the md code will report an error later.

This patch catches the problem early and rounds the region_size to the
next power of two.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
9 years agodm thin: cleanup dead code
Joe Thornber [Fri, 21 Dec 2012 20:23:33 +0000 (20:23 +0000)]
dm thin: cleanup dead code

Remove unused @data_block parameter from cell_defer.
Change thin_bio_map to use many returns rather than setting a variable.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
9 years agodm thin: rename cell_defer_except to cell_defer_no_holder
Joe Thornber [Fri, 21 Dec 2012 20:23:33 +0000 (20:23 +0000)]
dm thin: rename cell_defer_except to cell_defer_no_holder

Rename cell_defer_except() to cell_defer_no_holder() which describes
its function more clearly.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
9 years agodm snapshot: optimize track_chunk
Mikulas Patocka [Fri, 21 Dec 2012 20:23:33 +0000 (20:23 +0000)]
dm snapshot: optimize track_chunk

track_chunk is always called with interrupts enabled. Consequently, we
do not need to save and restore interrupt state in "flags" variable.
This patch changes spin_lock_irqsave to spin_lock_irq and
spin_unlock_irqrestore to spin_unlock_irq.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
9 years agodm raid: use DM_ENDIO_INCOMPLETE
Mikulas Patocka [Fri, 21 Dec 2012 20:23:32 +0000 (20:23 +0000)]
dm raid: use DM_ENDIO_INCOMPLETE

Use a defined macro DM_ENDIO_INCOMPLETE instead of a numeric constant.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
9 years agodm raid1: remove impossible mempool_alloc error test
Mikulas Patocka [Fri, 21 Dec 2012 20:23:32 +0000 (20:23 +0000)]
dm raid1: remove impossible mempool_alloc error test

mempool_alloc can't fail if __GFP_WAIT is specified, so the condition
that tests if read_record is non-NULL is always true.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
9 years agodm thin: emit ignore_discard in status when discards disabled
Mike Snitzer [Fri, 21 Dec 2012 20:23:32 +0000 (20:23 +0000)]
dm thin: emit ignore_discard in status when discards disabled

If "ignore_discard" is specified when creating the thin pool device then
discard support is disabled for that device.  The pool device's status
should reflect this fact rather than stating "no_discard_passdown"
(which implies discards are enabled but passdown is disabled).

Reported-by: Zdenek Kabelac <zkabelac@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
9 years agodm persistent data: fix nested btree deletion
Joe Thornber [Fri, 21 Dec 2012 20:23:32 +0000 (20:23 +0000)]
dm persistent data: fix nested btree deletion

When deleting nested btrees, the code forgets to delete the innermost
btree.  The thin-metadata code serendipitously compensates for this by
claiming there is one extra layer in the tree.

This patch corrects both problems.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
9 years agodm thin: wake worker when discard is prepared
Joe Thornber [Fri, 21 Dec 2012 20:23:31 +0000 (20:23 +0000)]
dm thin: wake worker when discard is prepared

When discards are prepared it is best to directly wake the worker that
will process them.  The worker will be woken anyway, via periodic
commit, but there is no reason to not wake_worker here.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
9 years agodm thin: fix race between simultaneous io and discards to same block
Joe Thornber [Fri, 21 Dec 2012 20:23:31 +0000 (20:23 +0000)]
dm thin: fix race between simultaneous io and discards to same block

There is a race when discard bios and non-discard bios are issued
simultaneously to the same block.

Discard support is expensive for all thin devices precisely because you
have to be careful to quiesce the area you're discarding.  DM thin must
handle this conflicting IO pattern (simultaneous non-discard vs discard)
even though a sane application shouldn't be issuing such IO.

The race manifests as follows:

1. A non-discard bio is mapped in thin_bio_map.
   This doesn't lock out parallel activity to the same block.

2. A discard bio is issued to the same block as the non-discard bio.

3. The discard bio is locked in a dm_bio_prison_cell in process_discard
   to lock out parallel activity against the same block.

4. The non-discard bio's mapping continues and its all_io_entry is
   incremented so the bio is accounted for in the thin pool's all_io_ds
   which is a dm_deferred_set used to track time locality of non-discard IO.

5. The non-discard bio is finally locked in a dm_bio_prison_cell in
   process_bio.

The race can result in deadlock, leaving the block layer hanging waiting
for completion of a discard bio that never completes, e.g.:

INFO: task ruby:15354 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
ruby            D ffffffff8160f0e0     0 15354  15314 0x00000000
 ffff8802fb08bc58 0000000000000082 ffff8802fb08bfd8 0000000000012900
 ffff8802fb08a010 0000000000012900 0000000000012900 0000000000012900
 ffff8802fb08bfd8 0000000000012900 ffff8803324b9480 ffff88032c6f14c0
Call Trace:
 [<ffffffff814e5a19>] schedule+0x29/0x70
 [<ffffffff814e3d85>] schedule_timeout+0x195/0x220
 [<ffffffffa06b9bc1>] ? _dm_request+0x111/0x160 [dm_mod]
 [<ffffffff814e589e>] wait_for_common+0x11e/0x190
 [<ffffffff8107a170>] ? try_to_wake_up+0x2b0/0x2b0
 [<ffffffff814e59ed>] wait_for_completion+0x1d/0x20
 [<ffffffff81233289>] blkdev_issue_discard+0x219/0x260
 [<ffffffff81233e79>] blkdev_ioctl+0x6e9/0x7b0
 [<ffffffff8119a65c>] block_ioctl+0x3c/0x40
 [<ffffffff8117539c>] do_vfs_ioctl+0x8c/0x340
 [<ffffffff8119a547>] ? block_llseek+0x67/0xb0
 [<ffffffff811756f1>] sys_ioctl+0xa1/0xb0
 [<ffffffff810561f6>] ? sys_rt_sigprocmask+0x86/0xd0
 [<ffffffff814ef099>] system_call_fastpath+0x16/0x1b

The thinp-test-suite's test_discard_random_sectors reliably hits this
deadlock on fast SSD storage.

The fix for this race is that the all_io_entry for a bio must be
incremented whilst the dm_bio_prison_cell is held for the bio's
associated virtual and physical blocks.  That cell locking wasn't
occurring early enough in thin_bio_map.  This patch fixes this.

Care is taken to always call the new function inc_all_io_entry() with
the relevant cells locked, but they are generally unlocked before
calling issue() to try to avoid holding the cells locked across
generic_submit_request.

Also, now that thin_bio_map may lock bios in a cell, process_bio() is no
longer the only thread that will do so.  Because of this we must be sure
to use cell_defer_except() to release all non-holder entries, that
were added by the other thread, because they must be deferred.

This patch depends on "dm thin: replace dm_cell_release_singleton with
cell_defer_except".

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Cc: stable@vger.kernel.org
9 years agodm thin: replace dm_cell_release_singleton with cell_defer_except
Joe Thornber [Fri, 21 Dec 2012 20:23:31 +0000 (20:23 +0000)]
dm thin: replace dm_cell_release_singleton with cell_defer_except

Change existing users of the function dm_cell_release_singleton to share
cell_defer_except instead, and then remove the now-unused function.

Everywhere that calls dm_cell_release_singleton, the bio in question
is the holder of the cell.

If there are no non-holder entries in the cell then cell_defer_except
behaves exactly like dm_cell_release_singleton.  Conversely, if there
*are* non-holder entries then dm_cell_release_singleton must not be used
because those entries would need to be deferred.

Consequently, it is safe to replace use of dm_cell_release_singleton
with cell_defer_except.

This patch is a pre-requisite for "dm thin: fix race between
simultaneous io and discards to same block".

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
9 years agodm: disable WRITE SAME
Mike Snitzer [Fri, 21 Dec 2012 20:23:30 +0000 (20:23 +0000)]
dm: disable WRITE SAME

WRITE SAME bios are not yet handled correctly by device-mapper so
disable their use on device-mapper devices by setting
max_write_same_sectors to zero.

As an example, a ciphertext device is incompatible because the data
gets changed according to the location at which it written and so the
dm crypt target cannot support it.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org
Cc: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
9 years agodm ioctl: prevent unsafe change to dm_ioctl data_size
Alasdair G Kergon [Fri, 21 Dec 2012 20:23:30 +0000 (20:23 +0000)]
dm ioctl: prevent unsafe change to dm_ioctl data_size

Abort dm ioctl processing if userspace changes the data_size parameter
after we validated it but before we finished copying the data buffer
from userspace.

The dm ioctl parameters are processed in the following sequence:
 1. ctl_ioctl() calls copy_params();
 2. copy_params() makes a first copy of the fixed-sized portion of the
    userspace parameters into the local variable "tmp";
 3. copy_params() then validates tmp.data_size and allocates a new
    structure big enough to hold the complete data and copies the whole
    userspace buffer there;
 4. ctl_ioctl() reads userspace data the second time and copies the whole
    buffer into the pointer "param";
 5. ctl_ioctl() reads param->data_size without any validation and stores it
    in the variable "input_param_size";
 6. "input_param_size" is further used as the authoritative size of the
    kernel buffer.

The problem is that userspace code could change the contents of user
memory between steps 2 and 4.  In particular, the data_size parameter
can be changed to an invalid value after the kernel has validated it.
This lets userspace force the kernel to access invalid kernel memory.

The fix is to ensure that the size has not changed at step 4.

This patch shouldn't have a security impact because CAP_SYS_ADMIN is
required to run this code, but it should be fixed anyway.

Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Cc: stable@kernel.org
9 years agodm persistent data: rename node to btree_node
Mikulas Patocka [Fri, 21 Dec 2012 20:23:30 +0000 (20:23 +0000)]
dm persistent data: rename node to btree_node

This patch fixes a compilation failure on sparc32 by renaming struct node.

struct node is already defined in include/linux/node.h. On sparc32, it
happens to be included through other dependencies and persistent-data
doesn't compile because of conflicting declarations.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
9 years agoNFS: Kill fscache warnings when mounting without -ofsc
Trond Myklebust [Fri, 21 Dec 2012 16:02:32 +0000 (11:02 -0500)]
NFS: Kill fscache warnings when mounting without -ofsc

The fscache code will currently bleat a "non-unique superblock keys"
warning even if the user is mounting without the 'fsc' option.

There should be no reason to even initialise the superblock cache cookie
unless we're planning on using fscache for something, so ensure that we
check for the NFS_OPTION_FSCACHE flag before calling into the fscache
code.

Reported-by: Paweł Sikora <pawel.sikora@agmk.net>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: David Howells <dhowells@redhat.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agoNFS: Provide stub nfs_fscache_wait_on_invalidate() for when CONFIG_NFS_FSCACHE=n
David Howells [Fri, 21 Dec 2012 12:15:05 +0000 (12:15 +0000)]
NFS: Provide stub nfs_fscache_wait_on_invalidate() for when CONFIG_NFS_FSCACHE=n

Provide a stub nfs_fscache_wait_on_invalidate() function for when
CONFIG_NFS_FSCACHE=n lest the following error appear:

  fs/nfs/inode.c: In function 'nfs_invalidate_mapping':
  fs/nfs/inode.c:887:2: error: implicit declaration of function 'nfs_fscache_wait_on_invalidate' [-Werror=implicit-function-declaration]
  cc1: some warnings being treated as errors

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Reported-by: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agoMerge tag 'vfio-for-v3.8-v2' of git://github.com/awilliam/linux-vfio
Linus Torvalds [Fri, 21 Dec 2012 05:30:12 +0000 (21:30 -0800)]
Merge tag 'vfio-for-v3.8-v2' of git://github.com/awilliam/linux-vfio

Pull vfio update from Alex Williamson.

* tag 'vfio-for-v3.8-v2' of git://github.com/awilliam/linux-vfio:
  vfio-pci: Enable device before attempting reset
  VFIO: fix out of order labels for error recovery in vfio_pci_init()
  VFIO: use ACCESS_ONCE() to guard access to dev->driver
  VFIO: unregister IOMMU notifier on error recovery path
  vfio-pci: Re-order device reset
  vfio: simplify kmalloc+copy_from_user to memdup_user

9 years agoMerge branch 'for-next' of git://git.infradead.org/users/eparis/notify
Linus Torvalds [Fri, 21 Dec 2012 04:11:52 +0000 (20:11 -0800)]
Merge branch 'for-next' of git://git.infradead.org/users/eparis/notify

Pull filesystem notification updates from Eric Paris:
 "This pull mostly is about locking changes in the fsnotify system.  By
  switching the group lock from a spin_lock() to a mutex() we can now
  hold the lock across things like iput().  This fixes a problem
  involving unmounting a fs and having inodes be busy, first pointed out
  by FAT, but reproducible with tmpfs.

  This also restores signal driven I/O for inotify, which has been
  broken since about 2.6.32."

Ugh.  I *hate* the timing of this.  It was rebased after the merge
window opened, and then left to sit with the pull request coming the day
before the merge window closes.  That's just crap.  But apparently the
patches themselves have been around for over a year, just gathering
dust, so now it's suddenly critical.

Fixed up semantic conflict in fs/notify/fdinfo.c as per Stephen
Rothwell's fixes from -next.

* 'for-next' of git://git.infradead.org/users/eparis/notify:
  inotify: automatically restart syscalls
  inotify: dont skip removal of watch descriptor if creation of ignored event failed
  fanotify: dont merge permission events
  fsnotify: make fasync generic for both inotify and fanotify
  fsnotify: change locking order
  fsnotify: dont put marks on temporary list when clearing marks by group
  fsnotify: introduce locked versions of fsnotify_add_mark() and fsnotify_remove_mark()
  fsnotify: pass group to fsnotify_destroy_mark()
  fsnotify: use a mutex instead of a spinlock to protect a groups mark list
  fanotify: add an extra flag to mark_remove_from_mask that indicates wheather a mark should be destroyed
  fsnotify: take groups mark_lock before mark lock
  fsnotify: use reference counting for groups
  fsnotify: introduce fsnotify_get_group()
  inotify, fanotify: replace fsnotify_put_group() with fsnotify_destroy_group()

9 years agoMerge branch 'akpm' (Andrew's patch-bomb)
Linus Torvalds [Fri, 21 Dec 2012 04:00:43 +0000 (20:00 -0800)]
Merge branch 'akpm' (Andrew's patch-bomb)

Merge the rest of Andrew's patches for -rc1:
 "A bunch of fixes and misc missed-out-on things.

  That'll do for -rc1.  I still have a batch of IPC patches which still
  have a possible bug report which I'm chasing down."

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (25 commits)
  keys: use keyring_alloc() to create module signing keyring
  keys: fix unreachable code
  sendfile: allows bypassing of notifier events
  SGI-XP: handle non-fatal traps
  fat: fix incorrect function comment
  Documentation: ABI: remove testing/sysfs-devices-node
  proc: fix inconsistent lock state
  linux/kernel.h: fix DIV_ROUND_CLOSEST with unsigned divisors
  memcg: don't register hotcpu notifier from ->css_alloc()
  checkpatch: warn on uapi #includes that #include <uapi/...
  revert "rtc: recycle id when unloading a rtc driver"
  mm: clean up transparent hugepage sysfs error messages
  hfsplus: add error message for the case of failure of sync fs in delayed_sync_fs() method
  hfsplus: rework processing of hfs_btree_write() returned error
  hfsplus: rework processing errors in hfsplus_free_extents()
  hfsplus: avoid crash on failed block map free
  kcmp: include linux/ptrace.h
  drivers/rtc/rtc-imxdi.c: must include <linux/spinlock.h>
  mm: cma: WARN if freed memory is still in use
  exec: do not leave bprm->interp on stack
  ...

9 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Linus Torvalds [Fri, 21 Dec 2012 02:14:31 +0000 (18:14 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs

Pull VFS update from Al Viro:
 "fscache fixes, ESTALE patchset, vmtruncate removal series, assorted
  misc stuff."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (79 commits)
  vfs: make lremovexattr retry once on ESTALE error
  vfs: make removexattr retry once on ESTALE
  vfs: make llistxattr retry once on ESTALE error
  vfs: make listxattr retry once on ESTALE error
  vfs: make lgetxattr retry once on ESTALE
  vfs: make getxattr retry once on an ESTALE error
  vfs: allow lsetxattr() to retry once on ESTALE errors
  vfs: allow setxattr to retry once on ESTALE errors
  vfs: allow utimensat() calls to retry once on an ESTALE error
  vfs: fix user_statfs to retry once on ESTALE errors
  vfs: make fchownat retry once on ESTALE errors
  vfs: make fchmodat retry once on ESTALE errors
  vfs: have chroot retry once on ESTALE error
  vfs: have chdir retry lookup and call once on ESTALE error
  vfs: have faccessat retry once on an ESTALE error
  vfs: have do_sys_truncate retry once on an ESTALE error
  vfs: fix renameat to retry on ESTALE errors
  vfs: make do_unlinkat retry once on ESTALE errors
  vfs: make do_rmdir retry once on ESTALE errors
  vfs: add a flags argument to user_path_parent
  ...

9 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal
Linus Torvalds [Fri, 21 Dec 2012 02:05:28 +0000 (18:05 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/signal

Pull signal handling cleanups from Al Viro:
 "sigaltstack infrastructure + conversion for x86, alpha and um,
  COMPAT_SYSCALL_DEFINE infrastructure.

  Note that there are several conflicts between "unify
  SS_ONSTACK/SS_DISABLE definitions" and UAPI patches in mainline;
  resolution is trivial - just remove definitions of SS_ONSTACK and
  SS_DISABLED from arch/*/uapi/asm/signal.h; they are all identical and
  include/uapi/linux/signal.h contains the unified variant."

Fixed up conflicts as per Al.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal:
  alpha: switch to generic sigaltstack
  new helpers: __save_altstack/__compat_save_altstack, switch x86 and um to those
  generic compat_sys_sigaltstack()
  introduce generic sys_sigaltstack(), switch x86 and um to it
  new helper: compat_user_stack_pointer()
  new helper: restore_altstack()
  unify SS_ONSTACK/SS_DISABLE definitions
  new helper: current_user_stack_pointer()
  missing user_stack_pointer() instances
  Bury the conditionals from kernel_thread/kernel_execve series
  COMPAT_SYSCALL_DEFINE: infrastructure

9 years agoMerge branch 'fixes' of git://git.linaro.org/people/rmk/linux-arm
Linus Torvalds [Fri, 21 Dec 2012 01:56:23 +0000 (17:56 -0800)]
Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-arm

Pull ARM fixes from Russell King:
 "A number of smallish fixes scattered around the ARM code.  Probably
  the most serious one is the one from Al addressing the missing locking
  in the swap emulation code."

* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
  ARM: 7607/1: realview: fix private peripheral memory base for EB rev. B boards
  ARM: 7606/1: cache: flush to LoUU instead of LoUIS on uniprocessor CPUs
  ARM: missing ->mmap_sem around find_vma() in swp_emulate.c
  ARM: 7605/1: vmlinux.lds: Move .notes section next to the rodata
  ARM: 7602/1: Pass real "__machine_arch_type" variable to setup_machine_tags() procedure
  ARM: 7600/1: include CONFIG_DEBUG_LL_INCLUDE rather than mach/debug-macro.S

9 years agoMerge tag 'fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Linus Torvalds [Fri, 21 Dec 2012 01:55:34 +0000 (17:55 -0800)]
Merge tag 'fixes2' of git://git./linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes part 2 from Olof Johansson:
 "Here are a few more fixes for 3.8.  Two branches of fixes for Samsung
  platforms, including fixes for the audio build errors on all non-DT
  platforms.  There's also a fixup to the sunxi device-tree file renames
  due to a bad patch application by me, and a fix for OMAP due to
  function renames merged through the powerpc tree."

* tag 'fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: OMAP2+: Fix compillation error in mach-omap2/timer.c
  ARM: sunxi: rename device tree source files
  ARM: EXYNOS: Avoid passing the clks through platform data
  ARM: S5PV210: Avoid passing the clks through platform data
  ARM: S5P64X0: Add I2S clkdev support
  ARM: S5PC100: Add I2S clkdev support
  ARM: S3C64XX: Add I2S clkdev support
  ARM: EXYNOS: Fix MSHC clocks instance names
  ARM: EXYNOS: Fix NULL pointer dereference bug in SMDKV310
  ARM: EXYNOS: Fix NULL pointer dereference bug in SMDK4X12
  ARM: EXYNOS: Fix NULL pointer dereference bug in Origen
  ARM: SAMSUNG: Add missing include guard to gpio-core.h
  pinctrl: exynos5440/samsung: Staticize pcfgs
  pinctrl: samsung: Fix a typo in pinctrl-samsung.h
  ARM: EXYNOS: fix skip scu_enable() for EXYNOS5440
  ARM: EXYNOS: fix GIC using for EXYNOS5440
  ARM: EXYNOS: fix build error when MFC is not selected