]> git.openfabrics.org - ~shefty/rdma-dev.git/log
~shefty/rdma-dev.git
10 years agoMerge tag 'msm-cleanup-for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git...
Olof Johansson [Mon, 17 Sep 2012 00:45:45 +0000 (17:45 -0700)]
Merge tag 'msm-cleanup-for-3.7' of git://git./linux/kernel/git/davidb/linux-msm into next/cleanup

From David Brown:

Various cleanups for the msm targets.  Most of this is removing dead
code, along with a fix of a sparse warning, a list fix from a semantic
patch, and marking some functions as static.

* tag 'msm-cleanup-for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm:
  ARM: msm: Remove uncompiled board-msm7x27
  ARM: msm: Remove unused acpuclock-arm11
  ARM: msm: dma: use list_move_tail instead of list_del/list_add_tail
  ARM: msm: Fix sparse warnings due to incorrect type
  ARM: msm: Remove unused idle.c
  ARM: msm: clock-pcom: Mark functions static
  ARM: msm: Remove msm_hw_reset_hook

10 years agoMerge tag 'imx-cleanup' of git://git.pengutronix.de/git/imx/linux-2.6 into next/cleanup
Olof Johansson [Sun, 16 Sep 2012 23:58:49 +0000 (16:58 -0700)]
Merge tag 'imx-cleanup' of git://git.pengutronix.de/git/imx/linux-2.6 into next/cleanup

ARM i.MX cleanup patches

* tag 'imx-cleanup' of git://git.pengutronix.de/git/imx/linux-2.6:
  ARM i.MX53 clk: Fix ldb parent clocks
  serial/imx: fix IMX UART macro usage to reflect correct processor
  ARM: i.MX remove last leftovers from legacy clock support
  ARM: i.MX clk pllv1: move mxc_decode_pll code to its user
  ARM: imx27-phytec-phycore: Fix I2C EEPROM address
  ARM i.MX mx2_camera: Remove MX2_CAMERA_SWAP16 and MX2_CAMERA_PACK_DIR_MSB flags.
  ARM i.MX: remove duplicated include from clk-imx21.c
  ARM: plat-mxc: Remove unused imx_ioremap

10 years agoARM: msm: Remove uncompiled board-msm7x27
Stephen Boyd [Fri, 7 Sep 2012 02:50:02 +0000 (19:50 -0700)]
ARM: msm: Remove uncompiled board-msm7x27

This board file has never been compiled. Let's just remove it
along with the one Kconfig reference to it in io.c.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
10 years agoARM: msm: Remove unused acpuclock-arm11
Stephen Boyd [Fri, 7 Sep 2012 02:48:40 +0000 (19:48 -0700)]
ARM: msm: Remove unused acpuclock-arm11

This is dead code that isn't initialized or setup (although it is
compiled). Remove it and the data structures it references.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
10 years agoARM: msm: dma: use list_move_tail instead of list_del/list_add_tail
Wei Yongjun [Wed, 5 Sep 2012 06:53:46 +0000 (14:53 +0800)]
ARM: msm: dma: use list_move_tail instead of list_del/list_add_tail

Using list_move_tail() instead of list_del() + list_add_tail().

spatch with a semantic match is used to found this problem.
(http://coccinelle.lip6.fr/)

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: David Brown <davidb@codeaurora.org>
10 years agoARM: msm: Fix sparse warnings due to incorrect type
Stephen Boyd [Tue, 4 Sep 2012 20:17:33 +0000 (13:17 -0700)]
ARM: msm: Fix sparse warnings due to incorrect type

arch/arm/mach-msm/timer.c:153:3: warning: incorrect type in initializer (different address spaces)
arch/arm/mach-msm/timer.c:153:3:    expected void const [noderef] <asn:3>*__vpp_verify
arch/arm/mach-msm/timer.c:153:3:    got struct clock_event_device [noderef] <asn:3>**<noident>
arch/arm/mach-msm/timer.c:153:38: warning: incorrect type in assignment (different address spaces)
arch/arm/mach-msm/timer.c:153:38:    expected struct clock_event_device [noderef] <asn:3>*<noident>
arch/arm/mach-msm/timer.c:153:38:    got struct clock_event_device *evt
arch/arm/mach-msm/timer.c:191:22: warning: incorrect type in assignment (different address spaces)
arch/arm/mach-msm/timer.c:191:22:    expected struct clock_event_device [noderef] <asn:3>**static [toplevel] percpu_evt
arch/arm/mach-msm/timer.c:191:22:    got struct clock_event_device *[noderef] <asn:3>*<noident>
arch/arm/mach-msm/timer.c:196:4: warning: incorrect type in initializer (different address spaces)
arch/arm/mach-msm/timer.c:196:4:    expected void const [noderef] <asn:3>*__vpp_verify
arch/arm/mach-msm/timer.c:196:4:    got struct clock_event_device [noderef] <asn:3>**<noident>
arch/arm/mach-msm/timer.c:196:39: warning: incorrect type in assignment (different address spaces)
arch/arm/mach-msm/timer.c:196:39:    expected struct clock_event_device [noderef] <asn:3>*<noident>
arch/arm/mach-msm/timer.c:196:39:    got struct clock_event_device *ce
arch/arm/mach-msm/timer.c:198:24: warning: incorrect type in argument 4 (different address spaces)
arch/arm/mach-msm/timer.c:198:24:    expected void [noderef] <asn:3>*percpu_dev_id
arch/arm/mach-msm/timer.c:198:24:    got struct clock_event_device [noderef] <asn:3>**static [toplevel] percpu_evt

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
10 years agoARM: msm: Remove unused idle.c
Stephen Boyd [Wed, 22 Aug 2012 22:55:45 +0000 (15:55 -0700)]
ARM: msm: Remove unused idle.c

Forcing arm_pm_idle to be msm_idle() doesn't make sense in
configurations that don't have CONFIG_MSM7X00A_IDLE=y (i.e. any
targets that aren't 7x00a). Furthermore, that config doesn't even
exist, so this entire file is dead code. Just remove it so we can
use the default idle support on MSM.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
10 years agoARM: msm: clock-pcom: Mark functions static
Stephen Boyd [Wed, 22 Aug 2012 22:55:44 +0000 (15:55 -0700)]
ARM: msm: clock-pcom: Mark functions static

These functions are only used within clock-pcom.c, therefore mark
them as static.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
10 years agoARM: msm: Remove msm_hw_reset_hook
Stephen Boyd [Wed, 22 Aug 2012 22:55:43 +0000 (15:55 -0700)]
ARM: msm: Remove msm_hw_reset_hook

This reset hook is never assigned and is dead code. Remove it so
we have one less header file in the mach directory.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
10 years agoMerge branch 'clk' of git://github.com/hzhuang1/linux into next/cleanup
Olof Johansson [Thu, 13 Sep 2012 05:34:11 +0000 (22:34 -0700)]
Merge branch 'clk' of git://github.com/hzhuang1/linux into next/cleanup

* 'clk' of git://github.com/hzhuang1/linux:
  ARM: mmp: remove unused definition in APBC and APMU
  ARM: mmp: move mmp2 clock definition to separated file
  arm: mmp: move pxa910 clock definition to separated file
  arm: mmp: move pxa168 clock definition to separated file
  arm: mmp: make private clock definition exclude from common clock
  + Linux 3.6-rc4

10 years agoARM i.MX53 clk: Fix ldb parent clocks
Sascha Hauer [Mon, 4 Jun 2012 13:07:36 +0000 (15:07 +0200)]
ARM i.MX53 clk: Fix ldb parent clocks

The ipu_di0 and ipu_di1 muxes referenced to nonexisting clocks. Use
ldb_di0_gate and ldb_di1_gate instead.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
10 years agoserial/imx: fix IMX UART macro usage to reflect correct processor
Oskar Schirmer [Mon, 10 Sep 2012 09:19:35 +0000 (09:19 +0000)]
serial/imx: fix IMX UART macro usage to reflect correct processor

Platform dependant UART data refers to MX31 macro for MX35 machines.
For all other machines, macro usage matches machine type.

Though this compiles out to the same result, it looks much like
a typo, so fix it to use the right macros instead.

Signed-off-by: Oskar Schirmer <oskar@scara.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
10 years agoARM: i.MX remove last leftovers from legacy clock support
Sascha Hauer [Tue, 11 Sep 2012 06:50:00 +0000 (08:50 +0200)]
ARM: i.MX remove last leftovers from legacy clock support

This also removes mach/clock.h along the way

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Mike Turquette <mturquette@linaro.org>
10 years agoARM: i.MX clk pllv1: move mxc_decode_pll code to its user
Sascha Hauer [Tue, 11 Sep 2012 06:40:38 +0000 (08:40 +0200)]
ARM: i.MX clk pllv1: move mxc_decode_pll code to its user

The only code using mxc_decode_pll is clk-pllv1.c, so move the code
there.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Mike Turquette <mturquette@linaro.org>
10 years agoMerge branch 'ks8695/timer' into next/cleanup
Olof Johansson [Wed, 12 Sep 2012 05:40:57 +0000 (22:40 -0700)]
Merge branch 'ks8695/timer' into next/cleanup

* ks8695/timer:
  watchdog: ks8695: sink registers into driver

10 years agowatchdog: ks8695: sink registers into driver
Linus Walleij [Tue, 11 Sep 2012 05:48:15 +0000 (07:48 +0200)]
watchdog: ks8695: sink registers into driver

Commit 70adc3f32adc2fb90b0107c020678588e4cf9f51
"ARM: ks8695: merge the timer header into the timer driver"
accidentally broke the ks8695 watchdog since it was using
the timer registers in watchdog mode.

Perform the same operation here: push the registers down
into the driver, so it is self-contained, and we can keep
depopulating the <mach/*> namespace.

Reported-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Olof Johansson <olof@lixom.net>
10 years agoARM: mmp: remove unused definition in APBC and APMU
Chao Xie [Mon, 27 Aug 2012 02:54:03 +0000 (10:54 +0800)]
ARM: mmp: remove unused definition in APBC and APMU

Signed-off-by: Chao Xie <xiechao.mail@gmail.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
10 years agoARM: mmp: move mmp2 clock definition to separated file
Chao Xie [Mon, 27 Aug 2012 02:54:02 +0000 (10:54 +0800)]
ARM: mmp: move mmp2 clock definition to separated file

move mmp2 clock definition to another file. Then mmp2 can
choose common clock framework or private clock framework.

Signed-off-by: Chao Xie <xiechao.mail@gmail.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
10 years agoarm: mmp: move pxa910 clock definition to separated file
Chao Xie [Mon, 27 Aug 2012 02:54:01 +0000 (10:54 +0800)]
arm: mmp: move pxa910 clock definition to separated file

move pxa910 clock definition to another file. Then pxa910 can
choose common clock framework or private clock framework.

Signed-off-by: Chao Xie <xiechao.mail@gmail.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
10 years agoarm: mmp: move pxa168 clock definition to separated file
Chao Xie [Mon, 27 Aug 2012 02:54:00 +0000 (10:54 +0800)]
arm: mmp: move pxa168 clock definition to separated file

move pxa168 clock definition to another file. Then pxa168 can
choose common clock framework or private clock framework.

Signed-off-by: Chao Xie <xiechao.mail@gmail.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
10 years agoarm: mmp: make private clock definition exclude from common clock
Chao Xie [Mon, 27 Aug 2012 02:53:59 +0000 (10:53 +0800)]
arm: mmp: make private clock definition exclude from common clock

the clock.c is mmp private implementation, make it excluded
from common clock framework

Signed-off-by: Chao Xie <xiechao.mail@gmail.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
10 years agoMerge branch 'pnx4008-removal' of git://git.antcom.de/linux-2.6 into next/cleanup
Olof Johansson [Wed, 5 Sep 2012 23:16:32 +0000 (16:16 -0700)]
Merge branch 'pnx4008-removal' of git://git.antcom.de/linux-2.6 into next/cleanup

Removes the pnx4008 platform support, which hasn't seen any active
development since 2006 and seems to be unused these days.

* 'pnx4008-removal' of git://git.antcom.de/linux-2.6:
  ARM: mach-pnx4008: Remove architecture

10 years agoMerge branch 'ag5evm' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas...
Olof Johansson [Wed, 5 Sep 2012 22:58:38 +0000 (15:58 -0700)]
Merge branch 'ag5evm' of git://git./linux/kernel/git/horms/renesas into next/cleanup

* 'ag5evm' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: mach-shmobile: remove duplicated include from board-ag5evm.c

10 years agoMerge tag 'ks8695-time-for-arm-soc' of http://git.kernel.org/pub/scm/linux/kernel...
Olof Johansson [Wed, 5 Sep 2012 17:39:09 +0000 (10:39 -0700)]
Merge tag 'ks8695-time-for-arm-soc' of git./linux/kernel/git/linusw/linux-stericsson into next/cleanup

This cleans up the ks8695 timer driver and converts
it to use generic time and clock events.

* tag 'ks8695-time-for-arm-soc' of http://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
  ARM: ks8695: convert to generic time and clocksource
  ARM: ks8695: delete resume hook from timer
  ARM: ks8695: use [readl|writel]_relaxed()
  ARM: ks8695: merge the timer header into the timer driver

10 years agoARM: ks8695: convert to generic time and clocksource
Linus Walleij [Wed, 29 Aug 2012 18:27:22 +0000 (20:27 +0200)]
ARM: ks8695: convert to generic time and clocksource

Old platforms using ancient gettimeoffset() and other arcane
APIs are standing in the way of cleaning up the ARM kernel.
The gettimeoffset() was also broken: it would try to read out
the timer counter value, while this would not work (the
counter statically returns the initially programmed value)
so the implementation would anyway fall back to a homebrew
version of jiffie calculation.

This is an attempt at blind-coding a generic time and clocksource
driver for the platform by way of a datasheet and looking at the
old code.

Tested-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
10 years agoARM: ks8695: delete resume hook from timer
Linus Walleij [Wed, 29 Aug 2012 18:27:12 +0000 (20:27 +0200)]
ARM: ks8695: delete resume hook from timer

This system does not support suspend/resume so let's skip this
hook altogether.

Tested-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
10 years agoARM: ks8695: use [readl|writel]_relaxed()
Linus Walleij [Wed, 29 Aug 2012 18:27:02 +0000 (20:27 +0200)]
ARM: ks8695: use [readl|writel]_relaxed()

I have no clue why __raw* macros are used here, but I strongly
suspect there is no good reason at all for this, so removing
another bad example.

Tested-by: Greg Ungerer <gerg@snapgear.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
10 years agoARM: ks8695: merge the timer header into the timer driver
Linus Walleij [Wed, 29 Aug 2012 18:26:42 +0000 (20:26 +0200)]
ARM: ks8695: merge the timer header into the timer driver

This <mach/regs-timer.h> is broadcasted in the entire kernel for
no good reason, since it's only used by the timer driver. Merge
it into the driver.

Tested-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
10 years agoMerge tag 'arm-perf-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux...
Olof Johansson [Wed, 5 Sep 2012 05:12:41 +0000 (22:12 -0700)]
Merge tag 'arm-perf-3.7' of git://git./linux/kernel/git/will/linux into next/cleanup

From Will Deacon:

Bunch of perf updates for the ARM backend that pave the way for
big.LITTLE support in the future. The separation of CPU and PMU code
is also the start of being able to move some of this stuff under
drivers/.

* tag 'arm-perf-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux:
  ARM: perf: move irq registration into pmu implementation
  ARM: perf: move CPU-specific PMU handling code into separate file
  ARM: perf: prepare for moving CPU PMU code into separate file
  ARM: perf: probe devicetree in preference to current CPU
  ARM: perf: remove mysterious compiler barrier
  ARM: pmu: remove arm_pmu_type enumeration
  ARM: pmu: remove unused reservation mechanism
  ARM: perf: add devicetree bindings for 11MPcore, A5, A7 and A15 PMUs
  ARM: PMU: Add runtime PM Support

10 years agoMerge branch 'marco-prepare' of git://gitorious.org/sirfprima2-kernel/sirfprima2...
Olof Johansson [Wed, 5 Sep 2012 04:05:19 +0000 (21:05 -0700)]
Merge branch 'marco-prepare' of git://gitorious.org/sirfprima2-kernel/sirfprima2-kernel into next/cleanup

* 'marco-prepare' of git://gitorious.org/sirfprima2-kernel/sirfprima2-kernel:
  ARM: SIRF: make sirf irqchip driver optional since new SoCs will have GIC
  ARM: PRIMA2: adjust Kconfig to support select SoC features
  ARM: PRIMA2: use DT_MACHINE_START and convert to generic board
  clk: prima2: move from arch/arm/mach to drivers/clk
  ARM: PRIMA2: convert to common clk and finish full clk tree

10 years agoMerge branch 'cleanup/io-pci' into next/cleanup
Arnd Bergmann [Tue, 4 Sep 2012 13:07:35 +0000 (15:07 +0200)]
Merge branch 'cleanup/io-pci' into next/cleanup

The io-pci series has gained a merge to resolve a nontrivial
conflict.

* cleanup/io-pci:
  ARM: Fix ioremap() of address zero

Also includes an update to Linux 3.6-rc3

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
10 years agoMerge commit 'a849088aa1' from rmk/fixes into cleanup/io-pci
Arnd Bergmann [Tue, 4 Sep 2012 13:01:37 +0000 (15:01 +0200)]
Merge commit 'a849088aa1' from rmk/fixes into cleanup/io-pci

As Stephen Rothwell reports, a849088aa155 ("ARM: Fix ioremap() of
address zero") from the arm-current tree and commit c2794437091a ("ARM:
Add fixed PCI i/o mapping") from the arm-soc tree conflict in
a nontrivial way in arch/arm/mm/mmu.c.

Rob Herring explains:
The PCI i/o reserved area has a dummy physical address of 0 and
needs to be skipped by ioremap searches. So we don't set
VM_ARM_STATIC_MAPPING to prevent matches by ioremap. The vm_struct
settings don't really matter when we do the real mapping of the
i/o space.

Since commit a849088aa155 is at the start of the fixes branch
in the arm tree, we can merge it into the branch that contains
the other ioremap changes.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoLinux 3.6-rc4
Linus Torvalds [Sat, 1 Sep 2012 17:39:58 +0000 (10:39 -0700)]
Linux 3.6-rc4

10 years agotime: Move ktime_t overflow checking into timespec_valid_strict
John Stultz [Fri, 31 Aug 2012 17:30:06 +0000 (13:30 -0400)]
time: Move ktime_t overflow checking into timespec_valid_strict

Andreas Bombe reported that the added ktime_t overflow checking added to
timespec_valid in commit 4e8b14526ca7 ("time: Improve sanity checking of
timekeeping inputs") was causing problems with X.org because it caused
timeouts larger then KTIME_T to be invalid.

Previously, these large timeouts would be clamped to KTIME_MAX and would
never expire, which is valid.

This patch splits the ktime_t overflow checking into a new
timespec_valid_strict function, and converts the timekeeping codes
internal checking to use this more strict function.

Reported-and-tested-by: Andreas Bombe <aeb@debian.org>
Cc: Zhouping Liu <zliu@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agoMerge git://git.kernel.org/pub/scm/virt/kvm/kvm
Linus Torvalds [Sat, 1 Sep 2012 00:02:58 +0000 (17:02 -0700)]
Merge git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM bugfixes from Marcelo Tosatti.

* git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: fix KVM_GET_MSR for PV EOI
  kvm: Fix nonsense handling of compat ioctl

10 years agoMerge tag 'parisc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6
Linus Torvalds [Sat, 1 Sep 2012 00:02:20 +0000 (17:02 -0700)]
Merge tag 'parisc-fixes' of git://git./linux/kernel/git/jejb/parisc-2.6

Pull PARISC fixes from James Bottomley:
 "This is a set of two bug fixes.  One is the ATOMIC problem which is
  now causing a compile failure in certain situations.  The other is
  mishandling of PER_LINUX32 which may also cause user visible effects.

Signed-off-by: James Bottomley <JBottomley@Parallels.com>"
* tag 'parisc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6:
  [PARISC] fix personality flag check in copy_thread()
  [PARISC] Redefine ATOMIC_INIT and ATOMIC64_INIT to drop the casts

10 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Linus Torvalds [Sat, 1 Sep 2012 00:01:31 +0000 (17:01 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/s390/linux

Pull s390 fixes from Martin Schwidefsky:
 "A couple of s390 bug fixes for 3.5-rc4"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/32: Don't clobber personality flags on exec
  s390/smp: add missing smp_store_status() for !SMP
  s390/dasd: fix ioctl return value
  s390: Always use "long" for ssize_t to match size_t

10 years agoARM: mach-shmobile: remove duplicated include from board-ag5evm.c
Wei Yongjun [Sun, 26 Aug 2012 01:49:58 +0000 (09:49 +0800)]
ARM: mach-shmobile: remove duplicated include from board-ag5evm.c

From: Wei Yongjun <yongjun_wei@trendmicro.com.cn>

Remove duplicated include.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Simon Horman <horms@verge.net.au>
10 years agoMerge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Linus Torvalds [Thu, 30 Aug 2012 16:11:33 +0000 (09:11 -0700)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux

Pull drm fixes from Dave Airlie:
 "A bunch of scattered fixes ati/intel/nouveau, couple of core ones,
  nothing too shocking or different."

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm: Add EDID_QUIRK_FORCE_REDUCED_BLANKING for ASUS VW222S
  gma500: Consider CRTC initially active.
  drm/radeon: fix dig encoder selection on DCE61
  drm/radeon: fix double free in radeon_gpu_reset
  drm/radeon: force dma32 to fix regression rs4xx,rs6xx,rs740
  drm/radeon: rework panel mode setup
  drm/radeon/atom: powergating fixes for DCE6
  drm/radeon/atom: rework DIG modesetting on DCE3+
  drm/radeon: don't disable plls that are in use by other crtcs
  drm/radeon: add proper checking of RESOLVE_BOX command for r600-r700
  drm/radeon: initialize tracked CS state
  drm/radeon: fix reading CB_COLORn_MASK from the CS
  drm/nvc0/copy: check PUNITS to determine which copy engines are disabled
  i915: Quirk no_lvds on Gigabyte GA-D525TUD ITX motherboard
  drm/i915: Use the correct size of the GTT for placing the per-process entries
  drm: Check for invalid cursor flags
  drm: Initialize object type when using DRM_MODE() macro
  drm/i915: fix color order for BGR formats on IVB
  drm/i915: fix wrong order of parameters in port checking functions

10 years agos390/32: Don't clobber personality flags on exec
Heiko Carstens [Tue, 28 Aug 2012 08:02:08 +0000 (10:02 +0200)]
s390/32: Don't clobber personality flags on exec

In native 32 bit mode the personality flags were not correctly inherited.
This is the s390 version of 59e4c3a2 "powerpc/32: Don't clobber personality
flags on exec".

Reported-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
10 years agodrm: Add EDID_QUIRK_FORCE_REDUCED_BLANKING for ASUS VW222S
Paul Menzel [Wed, 8 Aug 2012 21:12:19 +0000 (23:12 +0200)]
drm: Add EDID_QUIRK_FORCE_REDUCED_BLANKING for ASUS VW222S

Connecting an ASUS VW222S [1] over VGA a garbled screen is shown with
vertical stripes in the top half.

In commit bc42aabc [2]

        commit bc42aabc6a01b92b0f961d65671564e0e1cd7592
        Author: Adam Jackson <ajax@redhat.com>
        Date:   Wed May 23 16:26:54 2012 -0400

            drm/edid/quirks: ViewSonic VA2026w

Adam Jackson added the quirk `EDID_QUIRK_FORCE_REDUCED_BLANKING` which
is also needed for this ASUS monitor.

All log files and output from `xrandr` is included in the referenced
Bugzilla report #17629.

Please note that this monitor only has a VGA (D-Sub) connector [1].

[1] http://www.asus.com/Display/LCD_Monitors/VW222S/
[2] http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commit;h=bc42aabc6a01b92b0f961d65671564e0e1cd7592

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=17629
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Cc: <dri-devel@lists.freedesktop.org>
Cc: Adam Jackson <ajax@redhat.com>
Cc: Ian Pilcher <arequipeno@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
10 years agoMerge branch 'drm-fixes-3.6' of git://people.freedesktop.org/~agd5f/linux into drm...
Dave Airlie [Thu, 30 Aug 2012 00:35:34 +0000 (10:35 +1000)]
Merge branch 'drm-fixes-3.6' of git://people.freedesktop.org/~agd5f/linux into drm-fixes

Alex writes:

Highlights:
- fix a gart regression on older IGP chips
- more MSAA fixes
- fix a double free in gpu reset code
- modesetting fixes
- trinity dig encoder fix.

* 'drm-fixes-3.6' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon: fix dig encoder selection on DCE61
  drm/radeon: fix double free in radeon_gpu_reset
  drm/radeon: force dma32 to fix regression rs4xx,rs6xx,rs740
  drm/radeon: rework panel mode setup
  drm/radeon/atom: powergating fixes for DCE6
  drm/radeon/atom: rework DIG modesetting on DCE3+
  drm/radeon: don't disable plls that are in use by other crtcs
  drm/radeon: add proper checking of RESOLVE_BOX command for r600-r700
  drm/radeon: initialize tracked CS state
  drm/radeon: fix reading CB_COLORn_MASK from the CS

10 years agogma500: Consider CRTC initially active.
Forest Bond [Mon, 13 Aug 2012 16:31:24 +0000 (16:31 +0000)]
gma500: Consider CRTC initially active.

[this one ideally should make 3.6 - it fixes the very annoying mode setting bug]

This causes the pipe to be forced off prior to initial mode set, which
roughly mirrors the behavior of the i915 driver.  It fixes initial mode
setting on my Intel DN2800MT (Cedarview) board.  Without it, mode
setting triggers an out-of-range error from the monitor for most modes,
but only on initial configuration (i.e. they can be configured
successfully from userspace after that).

Signed-off-by: Forest Bond <forest.bond@rapidrollout.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
10 years agodrm/radeon: fix dig encoder selection on DCE61
Alex Deucher [Wed, 29 Aug 2012 23:48:26 +0000 (19:48 -0400)]
drm/radeon: fix dig encoder selection on DCE61

Was using the DCE41 code which was wrong. Fixes
blank displays on a number of Trinity systems.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
10 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux...
Linus Torvalds [Wed, 29 Aug 2012 18:36:22 +0000 (11:36 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/mason/linux-btrfs

Pull btrfs fixes from Chris Mason:
 "I've split out the big send/receive update from my last pull request
  and now have just the fixes in my for-linus branch.  The send/recv
  branch will wander over to linux-next shortly though.

  The largest patches in this pull are Josef's patches to fix DIO
  locking problems and his patch to fix a crash during balance.  They
  are both well tested.

  The rest are smaller fixes that we've had queued.  The last rc came
  out while I was hacking new and exciting ways to recover from a
  misplaced rm -rf on my dev box, so these missed rc3."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (25 commits)
  Btrfs: fix that repair code is spuriously executed for transid failures
  Btrfs: fix ordered extent leak when failing to start a transaction
  Btrfs: fix a dio write regression
  Btrfs: fix deadlock with freeze and sync V2
  Btrfs: revert checksum error statistic which can cause a BUG()
  Btrfs: remove superblock writing after fatal error
  Btrfs: allow delayed refs to be merged
  Btrfs: fix enospc problems when deleting a subvol
  Btrfs: fix wrong mtime and ctime when creating snapshots
  Btrfs: fix race in run_clustered_refs
  Btrfs: don't run __tree_mod_log_free_eb on leaves
  Btrfs: increase the size of the free space cache
  Btrfs: barrier before waitqueue_active
  Btrfs: fix deadlock in wait_for_more_refs
  btrfs: fix second lock in btrfs_delete_delayed_items()
  Btrfs: don't allocate a seperate csums array for direct reads
  Btrfs: do not strdup non existent strings
  Btrfs: do not use missing devices when showing devname
  Btrfs: fix that error value is changed by mistake
  Btrfs: lock extents as we map them in DIO
  ...

10 years agoMerge git://www.linux-watchdog.org/linux-watchdog
Linus Torvalds [Wed, 29 Aug 2012 18:35:00 +0000 (11:35 -0700)]
Merge git://www.linux-watchdog.org/linux-watchdog

Pull watchdog fixes from Wim Van Sebroeck:
 "This will fix a warning for watchdog-test.c and it will remove a
  duplicate include of delay.h"

* git://www.linux-watchdog.org/linux-watchdog:
  watchdog: da9052: Remove duplicate inclusion of delay.h
  watchdog: fix watchdog-test.c build warning

10 years agomm, slab: lock the correct nodelist after reenabling irqs
David Rientjes [Wed, 29 Aug 2012 02:57:21 +0000 (19:57 -0700)]
mm, slab: lock the correct nodelist after reenabling irqs

cache_grow() can reenable irqs so the cpu (and node) can change, so ensure
that we take list_lock on the correct nodelist.

This fixes an issue with commit 072bb0aa5e06 ("mm: sl[au]b: add
knowledge of PFMEMALLOC reserve pages") where list_lock for the wrong
node was taken after growing the cache.

Reported-and-tested-by: Haggai Eran <haggaie@mellanox.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agodrm/radeon: fix double free in radeon_gpu_reset
Christian König [Wed, 29 Aug 2012 11:24:15 +0000 (13:24 +0200)]
drm/radeon: fix double free in radeon_gpu_reset

radeon_ring_restore is freeing the memory for the saved
ring data. We need to remember that, otherwise we try to
restore the ring data again on the next try. Additional
to that it shouldn't try the reset infinitely if we have
saved ring data.

Signed-off-by: Christian König <deathsimple@vodafone.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
10 years agodrm/radeon: force dma32 to fix regression rs4xx,rs6xx,rs740
Jerome Glisse [Tue, 28 Aug 2012 20:50:22 +0000 (16:50 -0400)]
drm/radeon: force dma32 to fix regression rs4xx,rs6xx,rs740

It seems some of those IGP dislike non dma32 page despite what
documentation says. Fix regression since we allowed non dma32
pages. It seems it only affect some revision of those IGP chips
as we don't know which one just force dma32 for all of them.

https://bugzilla.redhat.com/show_bug.cgi?id=785375

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 years agodrm/radeon: rework panel mode setup
Alex Deucher [Mon, 27 Aug 2012 21:48:18 +0000 (17:48 -0400)]
drm/radeon: rework panel mode setup

Adjust the panel mode setup to match the behavior
of the vbios.  Rather than checking for specific
bridge chip ids, just check the eDP configuration register.
This saves extra aux transactions and works across
DP bridge chips without requiring additional per chip
id checking.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 years agodrm/radeon/atom: powergating fixes for DCE6
Alex Deucher [Fri, 24 Aug 2012 22:21:21 +0000 (18:21 -0400)]
drm/radeon/atom: powergating fixes for DCE6

Power gating is per crtc pair, but the powergating registers
should be called individually.  The hw handles power up/down
properly.  The pair is powered up if either crtc in the pair
is powered up and the pair is not powered down until both
crtcs in the pair are powered down.  This simplifies
programming and should save additional power as the previous
code never actually power gated the crtc pair.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
10 years agodrm/radeon/atom: rework DIG modesetting on DCE3+
Alex Deucher [Wed, 22 Aug 2012 13:54:56 +0000 (09:54 -0400)]
drm/radeon/atom: rework DIG modesetting on DCE3+

The ordering is important and the current drm code
wasn't cutting it for modern DIG encoders.  We need
to have information about crtc before setting up
the encoders so I've shifted the ordering a bit.
Probably we'll need a full rework akin to danvet's
recent intel patchs.  This patch fixes numerous
issues with DP bridge chips and makes link training
much more reliable.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
10 years agodrm/radeon: don't disable plls that are in use by other crtcs
Alex Deucher [Tue, 21 Aug 2012 23:06:21 +0000 (19:06 -0400)]
drm/radeon: don't disable plls that are in use by other crtcs

Some plls are shared for DP.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
10 years agodrm/radeon: add proper checking of RESOLVE_BOX command for r600-r700
Marek Olšák [Fri, 24 Aug 2012 12:27:36 +0000 (14:27 +0200)]
drm/radeon: add proper checking of RESOLVE_BOX command for r600-r700

Checking of the second colorbuffer was skipped on r700, because
CB_TARGET_MASK was 0xf. With r600, CB_TARGET_MASK is changed to 0xff,
so we must set the number of samples of the second colorbuffer to 1 in order
to pass the CS checker.
The DRM version is bumped, because RESOLVE_BOX is always rejected without this
fix on r600.

Signed-off-by: Marek Olšák <maraeo@gmail.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 years agodrm/radeon: initialize tracked CS state
Marek Olšák [Wed, 22 Aug 2012 15:02:43 +0000 (17:02 +0200)]
drm/radeon: initialize tracked CS state

This should help catch uninitialized registers and reject commands
because of that.

Signed-off-by: Marek Olšák <maraeo@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 years agodrm/radeon: fix reading CB_COLORn_MASK from the CS
Marek Olšák [Wed, 22 Aug 2012 15:02:42 +0000 (17:02 +0200)]
drm/radeon: fix reading CB_COLORn_MASK from the CS

Signed-off-by: Marek Olšák <maraeo@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 years agowatchdog: da9052: Remove duplicate inclusion of delay.h
Sachin Kamat [Tue, 7 Aug 2012 09:44:12 +0000 (15:14 +0530)]
watchdog: da9052: Remove duplicate inclusion of delay.h

delay.h header file was included twice.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
10 years agowatchdog: fix watchdog-test.c build warning
Randy Dunlap [Mon, 23 Jul 2012 17:46:11 +0000 (10:46 -0700)]
watchdog: fix watchdog-test.c build warning

Fix compiler warning by making the function static:

Documentation/watchdog/src/watchdog-test.c:34:6: warning: no previous prototype for 'term'

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
10 years agoMerge branch 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel...
Dave Airlie [Wed, 29 Aug 2012 10:09:23 +0000 (20:09 +1000)]
Merge branch 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel into drm-fixes

Daniel writes:

"Just a few smaller things:
- Fix up a pipe vs. plane confusion from a refactoring, fixes a regression
  from 3.1 (Anhua Xu).
- Fix ivb sprite pixel formats (Vijay).
- Fixup ppgtt pde placement for machines where the Bios artifically limits
  the availbale gtt space in the name of ... product differentiation
  (Chris). This fixes an oops.
- Yet another no_lvds quirk entry."

* 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel:
  i915: Quirk no_lvds on Gigabyte GA-D525TUD ITX motherboard
  drm/i915: Use the correct size of the GTT for placing the per-process entries
  drm/i915: fix color order for BGR formats on IVB
  drm/i915: fix wrong order of parameters in port checking functions

10 years agoMerge branch 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux...
Dave Airlie [Wed, 29 Aug 2012 10:05:40 +0000 (20:05 +1000)]
Merge branch 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes

Ben says its just a single fix to avoid the wrong pcopy units being used.

* 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6:
  drm/nvc0/copy: check PUNITS to determine which copy engines are disabled

10 years agoARM: imx27-phytec-phycore: Fix I2C EEPROM address
Fabio Estevam [Tue, 28 Aug 2012 23:22:45 +0000 (20:22 -0300)]
ARM: imx27-phytec-phycore: Fix I2C EEPROM address

Fix I2C EEPROM address as per 24c32 datasheet.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
10 years agodrm/nvc0/copy: check PUNITS to determine which copy engines are disabled
Ben Skeggs [Mon, 27 Aug 2012 06:22:49 +0000 (16:22 +1000)]
drm/nvc0/copy: check PUNITS to determine which copy engines are disabled

On some Fermi chipsets (NVCE particularly) PCOPY1 doesn't exist.  And if
what I've seen on Kepler is true of Fermi too, chipsets of the same type
can have different PCOPY units available.

This should fix a v3.5 regression reported by a number of people effecting
suspend/resume on NVC8/NVCE chipsets.

Cc: stable@vger.kernel.org [3.5]
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
10 years agoBtrfs: fix that repair code is spuriously executed for transid failures
Stefan Behrens [Fri, 10 Aug 2012 14:58:21 +0000 (08:58 -0600)]
Btrfs: fix that repair code is spuriously executed for transid failures

If verify_parent_transid() fails for all mirrors, the current code
calls repair_io_failure() anyway which means:
- that the disk block is rewritten without repairing anything and
- that a kernel log message is printed which misleadingly claims
  that a read error was corrected.

This is an example:
parent transid verify failed on 615015833600 wanted 110423 found 110424
parent transid verify failed on 615015833600 wanted 110423 found 110424
btrfs read error corrected: ino 1 off 615015833600 (dev /dev/...)

It is wrong to ignore the results from verify_parent_transid() and to
call repair_eb_io_failure() when the verification of the transids failed.
This commit fixes the issue.

Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
10 years agoBtrfs: fix ordered extent leak when failing to start a transaction
Liu Bo [Wed, 22 Aug 2012 03:13:25 +0000 (21:13 -0600)]
Btrfs: fix ordered extent leak when failing to start a transaction

We cannot just return error before freeing ordered extent and releasing reserved
space when we fail to start a transacion.

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
10 years agoBtrfs: fix a dio write regression
Liu Bo [Thu, 23 Aug 2012 02:10:38 +0000 (20:10 -0600)]
Btrfs: fix a dio write regression

This bug is introduced by commit 3b8bde746f6f9bd36a9f05f5f3b6e334318176a9
(Btrfs: lock extents as we map them in DIO).

In dio write, we should unlock the section which we didn't do IO on in case that
we fall back to buffered write.  But we need to not only unlock the section
but also cleanup reserved space for the section.

This bug was found while running xfstests 133, with this 133 no longer complains.

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
10 years agoBtrfs: fix deadlock with freeze and sync V2
Josef Bacik [Fri, 24 Aug 2012 18:53:03 +0000 (12:53 -0600)]
Btrfs: fix deadlock with freeze and sync V2

We can deadlock with freeze right now because we unconditionally start a
transaction in our ->sync_fs() call.  To fix this just check and see if we
have a running transaction to commit.  This saves us from the deadlock
because at this point we'll have the umount sem for the sb so we're safe
from freezes coming in after we've done our check.  With this patch the
freeze xfstests no longer deadlocks.  Thanks,

Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
10 years agoBtrfs: revert checksum error statistic which can cause a BUG()
Stefan Behrens [Mon, 27 Aug 2012 14:30:03 +0000 (08:30 -0600)]
Btrfs: revert checksum error statistic which can cause a BUG()

Commit 442a4f6308e694e0fa6025708bd5e4e424bbf51c added btrfs device
statistic counters for detected IO and checksum errors to Linux 3.5.
The statistic part that counts checksum errors in
end_bio_extent_readpage() can cause a BUG() in a subfunction:
"kernel BUG at fs/btrfs/volumes.c:3762!"
That part is reverted with the current patch.
However, the counting of checksum errors in the scrub context remains
active, and the counting of detected IO errors (read, write or flush
errors) in all contexts remains active.

Cc: stable <stable@vger.kernel.org> # 3.5
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
10 years agoBtrfs: remove superblock writing after fatal error
Stefan Behrens [Wed, 1 Aug 2012 11:45:52 +0000 (05:45 -0600)]
Btrfs: remove superblock writing after fatal error

With commit acce952b0, btrfs was changed to flag the filesystem with
BTRFS_SUPER_FLAG_ERROR and switch to read-only mode after a fatal
error happened like a write I/O errors of all mirrors.
In such situations, on unmount, the superblock is written in
btrfs_error_commit_super(). This is done with the intention to be able
to evaluate the error flag on the next mount. A warning is printed
in this case during the next mount and the log tree is ignored.

The issue is that it is possible that the superblock points to a root
that was not written (due to write I/O errors).
The result is that the filesystem cannot be mounted. btrfsck also does
not start and all the other btrfs-progs tools fail to start as well.
However, mount -o recovery is working well and does the right things
to recover the filesystem (i.e., don't use the log root, clear the
free space cache and use the next mountable root that is stored in the
root backup array).

This patch removes the writing of the superblock when
BTRFS_SUPER_FLAG_ERROR is set, and removes the handling of the error
flag in the mount function.

These lines can be used to reproduce the issue (using /dev/sdm):
SCRATCH_DEV=/dev/sdm
SCRATCH_MNT=/mnt
echo 0 25165824 linear $SCRATCH_DEV 0 | dmsetup create foo
ls -alLF /dev/mapper/foo
mkfs.btrfs /dev/mapper/foo
mount /dev/mapper/foo $SCRATCH_MNT
echo bar > $SCRATCH_MNT/foo
sync
echo 0 25165824 error | dmsetup reload foo
dmsetup resume foo
ls -alF $SCRATCH_MNT
touch $SCRATCH_MNT/1
ls -alF $SCRATCH_MNT
sleep 35
echo 0 25165824 linear $SCRATCH_DEV 0 | dmsetup reload foo
dmsetup resume foo
sleep 1
umount $SCRATCH_MNT
btrfsck /dev/mapper/foo
dmsetup remove foo

Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
10 years agoBtrfs: allow delayed refs to be merged
Josef Bacik [Tue, 7 Aug 2012 20:00:32 +0000 (16:00 -0400)]
Btrfs: allow delayed refs to be merged

Daniel Blueman reported a bug with fio+balance on a ramdisk setup.
Basically what happens is the balance relocates a tree block which will drop
the implicit refs for all of its children and adds a full backref.  Once the
block is relocated we have to add the implicit refs back, so when we cow the
block again we add the implicit refs for its children back.  The problem
comes when the original drop ref doesn't get run before we add the implicit
refs back.  The delayed ref stuff will specifically prefer ADD operations
over DROP to keep us from freeing up an extent that will have references to
it, so we try to add the implicit ref before it is actually removed and we
panic.  This worked fine before because the add would have just canceled the
drop out and we would have been fine.  But the backref walking work needs to
be able to freeze the delayed ref stuff in time so we have this ever
increasing sequence number that gets attached to all new delayed ref updates
which makes us not merge refs and we run into this issue.

So to fix this we need to merge delayed refs.  So everytime we run a
clustered ref we need to try and merge all of its delayed refs.  The backref
walking stuff locks the delayed ref head before processing, so if we have it
locked we are safe to merge any refs inside of the sequence number.  If
there is no sequence number we can merge all refs.  Doing this not only
fixes our bug but keeps the delayed ref code from adding and removing
useless refs and batching together multiple refs into one search instead of
one search per delayed ref, which will really help our commit times.  I ran
this with Daniels test and 276 and I haven't seen any problems.  Thanks,

Reported-by: Daniel J Blueman <daniel@quora.org>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
10 years agoBtrfs: fix enospc problems when deleting a subvol
Josef Bacik [Wed, 8 Aug 2012 16:12:59 +0000 (10:12 -0600)]
Btrfs: fix enospc problems when deleting a subvol

Subvol delete is a special kind of awful where we use the global reserve to
cover the ENOSPC requirements.  The problem is once we're done removing
everything we do a btrfs_update_inode(), which by default will try to do the
delayed update stuff which will use it's own reserve.  There will be no
space in this reserve and we'll return ENOSPC.  So instead use
btrfs_update_inode_fallback() which will just fallback to updating the inode
item in the case of enospc.  This is fine because the global reserve covers
the space requirements for this.  With this patch I can now delete a subvol
on a problem image Dave Sterba sent me.  Thanks,

Reported-by: David Sterba <dave@jikos.cz>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
10 years agoBtrfs: fix wrong mtime and ctime when creating snapshots
Miao Xie [Thu, 9 Aug 2012 03:39:36 +0000 (21:39 -0600)]
Btrfs: fix wrong mtime and ctime when creating snapshots

When we created a new snapshot, the mtime and ctime of its parent directory
were not updated. Fix it.

Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
10 years agoBtrfs: fix race in run_clustered_refs
Arne Jansen [Thu, 9 Aug 2012 06:16:53 +0000 (00:16 -0600)]
Btrfs: fix race in run_clustered_refs

With commit

commit d1270cd91f308c9d22b2804720c36ccd32dbc35e
Author: Arne Jansen <sensille@gmx.net>
Date:   Tue Sep 13 15:16:43 2011 +0200

     Btrfs: put back delayed refs that are too new

I added a window where the delayed_ref's head->ref_mod code can diverge
from the sum of the remaining refs, because we release the head->mutex
in the middle. This leads to btrfs_lookup_extent_info returning wrong
numbers. This patch fixes this by adjusting the head's ref_mod with each
delayed ref we run.

Signed-off-by: Arne Jansen <sensille@gmx.net>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
10 years agoBtrfs: don't run __tree_mod_log_free_eb on leaves
Chris Mason [Tue, 7 Aug 2012 19:34:49 +0000 (15:34 -0400)]
Btrfs: don't run __tree_mod_log_free_eb on leaves

When we split a leaf, we may end up inserting a new root on top of that
leaf.  The reflog code was incorrectly assuming the old root was always
a node.  This makes sure we skip over leaves.

Signed-off-by: Chris Mason <chris.mason@fusionio.com>
10 years agoBtrfs: increase the size of the free space cache
Josef Bacik [Mon, 6 Aug 2012 19:46:38 +0000 (13:46 -0600)]
Btrfs: increase the size of the free space cache

Arne was complaining about the space cache having mismatching generation
numbers when debugging a deadlock.  This is because we can run out of space
in our preallocated range for our space cache if you have a pretty
fragmented amount of space in your pinned space.  So just increase the
amount of space we preallocate for space cache so we can be sure to have
enough space.  This will only really affect data ranges since their the only
chunks that end up larger than 256MB.  Thanks,

Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
10 years agoBtrfs: barrier before waitqueue_active
Josef Bacik [Wed, 1 Aug 2012 19:36:24 +0000 (15:36 -0400)]
Btrfs: barrier before waitqueue_active

We need a barrir before calling waitqueue_active otherwise we will miss
wakeups.  So in places that do atomic_dec(); then atomic_read() use
atomic_dec_return() which imply a memory barrier (see memory-barriers.txt)
and then add an explicit memory barrier everywhere else that need them.
Thanks,

Signed-off-by: Josef Bacik <jbacik@fusionio.com>
10 years agoBtrfs: fix deadlock in wait_for_more_refs
Arne Jansen [Mon, 6 Aug 2012 20:18:51 +0000 (14:18 -0600)]
Btrfs: fix deadlock in wait_for_more_refs

Commit a168650c introduced a waiting mechanism to prevent busy waiting in
btrfs_run_delayed_refs. This can deadlock with btrfs_run_ordered_operations,
where a tree_mod_seq is held while waiting for the io to complete, while
the end_io calls btrfs_run_delayed_refs.
This whole mechanism is unnecessary. If not enough runnable refs are
available to satisfy count, just return as count is more like a guideline
than a strict requirement.
In case we have to run all refs, commit transaction makes sure that no
other threads are working in the transaction anymore, so we just assert
here that no refs are blocked.

Signed-off-by: Arne Jansen <sensille@gmx.net>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
10 years agobtrfs: fix second lock in btrfs_delete_delayed_items()
Fengguang Wu [Sat, 4 Aug 2012 07:45:02 +0000 (01:45 -0600)]
btrfs: fix second lock in btrfs_delete_delayed_items()

Fix a real bug caught by coccinelle.

fs/btrfs/delayed-inode.c:1013:1-11: second lock on line 1013

Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
10 years agoBtrfs: don't allocate a seperate csums array for direct reads
Josef Bacik [Fri, 3 Aug 2012 20:49:19 +0000 (16:49 -0400)]
Btrfs: don't allocate a seperate csums array for direct reads

We've been allocating a big array for csums instead of storing them in the
io_tree like we do for buffered reads because previously we were locking the
entire range, so we didn't have an extent state for each sector of the
range.  But now that we do the range locking as we map the buffers we can
limit the mapping lenght to sectorsize and use the private part of the
io_tree for our csums.  This allows us to avoid an extra memory allocation
for direct reads which could incur latency.  Thanks,

Signed-off-by: Josef Bacik <jbacik@fusionio.com>
10 years agoBtrfs: do not strdup non existent strings
Josef Bacik [Thu, 2 Aug 2012 14:23:59 +0000 (10:23 -0400)]
Btrfs: do not strdup non existent strings

When we close devices we add back empty devices for some reason that escapes
me.  In the case of a missing dev we don't allocate an rcu_string for it's
name, so check to see if the device has a name and if it doesn't don't
bother strdup()'ing it.  Thanks,

Signed-off-by: Josef Bacik <jbacik@fusionio.com>
10 years agoBtrfs: do not use missing devices when showing devname
Josef Bacik [Thu, 2 Aug 2012 14:22:20 +0000 (10:22 -0400)]
Btrfs: do not use missing devices when showing devname

If you do the following

mkfs.btrfs /dev/sdb /dev/sdc
rmmod btrfs
dd if=/dev/zero of=/dev/sdb bs=1M count=1
mount -o degraded /dev/sdc /mnt/btrfs-test

the box will panic trying to deref the name for the missing dev since it is
the lower numbered devid.  So fix show_devname to not use missing devices.
Thanks,

Signed-off-by: Josef Bacik <jbacik@fusionio.com>
10 years agoBtrfs: fix that error value is changed by mistake
Stefan Behrens [Wed, 1 Aug 2012 10:28:01 +0000 (04:28 -0600)]
Btrfs: fix that error value is changed by mistake

In iterate_inodes_from_logical() the error result from
extent_from_logical() is patched by mistake. Typically ENOENT is
patched to EINVAL because (-ENOENT & BTRFS_EXTENT_FLAG_TREE_BLOCK)
evaluates to true.

Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
10 years agoBtrfs: lock extents as we map them in DIO
Josef Bacik [Tue, 31 Jul 2012 20:28:48 +0000 (16:28 -0400)]
Btrfs: lock extents as we map them in DIO

A deadlock in xfstests 113 was uncovered by commit

d187663ef24cd3d033f0cbf2867e70b36a3a90b8

This is because we would not return EIOCBQUEUED for short AIO reads, instead
we'd wait for the DIO to complete and then return the amount of data we
transferred, which would allow our stuff to unlock the remaning amount.  But
with this change this no longer happens, so if we have a short AIO read (for
example if we try to read past EOF), we could leave the section from EOF to
the end of where we tried to read locked.  Fixing this is tricky since there
is no clear way to know exactly how much data DIO truly submitted for IO, so
to make this less hard on ourselves and less combersome we need to lock the
extents as we try to map them, and then we unlock any areas we didn't
actually map.  This makes us completely safe from deadlocks and reliance on
a particular behavior of the DIO code.  This also lays the groundwork for
allowing us to use the normal csum storage method for reads which means we
can remove an allocation.  Thanks,

Signed-off-by: Josef Bacik <jbacik@fusionio.com>
10 years agoBtrfs: fix some endian bugs handling the root times
Dan Carpenter [Mon, 30 Jul 2012 08:10:44 +0000 (02:10 -0600)]
Btrfs: fix some endian bugs handling the root times

"trans->transid" is cpu endian but we want to store the data as little
endian.  "item->ctime.nsec" is only 32 bits, not 64.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
10 years agoBtrfs: unlock on error in btrfs_delalloc_reserve_metadata()
Dan Carpenter [Mon, 30 Jul 2012 08:15:15 +0000 (02:15 -0600)]
Btrfs: unlock on error in btrfs_delalloc_reserve_metadata()

We should release this mutex before returning the error code.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
10 years agoBtrfs: checking for NULL instead of IS_ERR
Dan Carpenter [Mon, 30 Jul 2012 08:15:43 +0000 (02:15 -0600)]
Btrfs: checking for NULL instead of IS_ERR

add_qgroup_rb() never returns NULL, only error pointers.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
10 years agoBtrfs: fix some error codes in btrfs_qgroup_inherit()
Dan Carpenter [Mon, 30 Jul 2012 08:16:10 +0000 (02:16 -0600)]
Btrfs: fix some error codes in btrfs_qgroup_inherit()

These are returning zero when it should be returning a negative error
code.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
10 years agoBtrfs: fix a misplaced address operator in a condition
Stefan Behrens [Thu, 26 Jul 2012 09:40:35 +0000 (03:40 -0600)]
Btrfs: fix a misplaced address operator in a condition

This should obviously not be "if (&flag)" but "if (flag)".

Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
10 years agoARM i.MX mx2_camera: Remove MX2_CAMERA_SWAP16 and MX2_CAMERA_PACK_DIR_MSB flags.
Javier Martin [Thu, 12 Jul 2012 09:03:29 +0000 (11:03 +0200)]
ARM i.MX mx2_camera: Remove MX2_CAMERA_SWAP16 and MX2_CAMERA_PACK_DIR_MSB flags.

These flags are not used any longer and can be safely removed
since:

| commit 8a76e5383fb5f58868fdd3a2fe1f4b95988f10a8
| Author: Javier Martin <javier.martin@vista-silicon.com>
| Date:   Wed Jul 11 17:34:54 2012 +0200
|
|    media: mx2_camera: Fix mbus format handling

Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
10 years agoARM: SIRF: make sirf irqchip driver optional since new SoCs will have GIC
Barry Song [Thu, 23 Aug 2012 05:41:59 +0000 (13:41 +0800)]
ARM: SIRF: make sirf irqchip driver optional since new SoCs will have GIC

New MARCO and POLO SoC use GIC, so make irq.c optional and enable it
only if we enable ARCH_PRIMA2 in Kconfig

Signed-off-by: Barry Song <Baohua.Song@csr.com>
10 years agoARM: PRIMA2: adjust Kconfig to support select SoC features
Barry Song [Thu, 23 Aug 2012 05:41:58 +0000 (13:41 +0800)]
ARM: PRIMA2: adjust Kconfig to support select SoC features

Now we have primaII, but will include Marco and Polo in mach-prima2
as well. We add Kconfig menu so that we can select necessary SoC
features.

Signed-off-by: Barry Song <Baohua.Song@csr.com>
10 years agoARM: PRIMA2: use DT_MACHINE_START and convert to generic board
Barry Song [Thu, 23 Aug 2012 05:41:57 +0000 (13:41 +0800)]
ARM: PRIMA2: use DT_MACHINE_START and convert to generic board

we will have SiRFMarco and SiRFPolo, all of them will be in the
generic board.

Signed-off-by: Barry Song <Baohua.Song@csr.com>
10 years agos390/smp: add missing smp_store_status() for !SMP
Heiko Carstens [Mon, 27 Aug 2012 13:18:45 +0000 (15:18 +0200)]
s390/smp: add missing smp_store_status() for !SMP

Fix this compile error:

arch/s390/kernel/machine_kexec.c: In function ‘setup_regs’:
arch/s390/kernel/machine_kexec.c:63:3: error: implicit declaration
 of function ‘smp_store_status’ [-Werror=implicit-function-declaration]

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
10 years agos390/dasd: fix ioctl return value
Heiko Carstens [Mon, 27 Aug 2012 08:59:42 +0000 (10:59 +0200)]
s390/dasd: fix ioctl return value

For unimplemented ioctls the dasd driver should return -ENOTTY.

Reported-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Acked-by: Stefan Weinhuber <wein@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
10 years agoARM i.MX: remove duplicated include from clk-imx21.c
Wei Yongjun [Sun, 26 Aug 2012 01:48:11 +0000 (09:48 +0800)]
ARM i.MX: remove duplicated include from clk-imx21.c

From: Wei Yongjun <yongjun_wei@trendmicro.com.cn>

Remove duplicated include.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
10 years agoKVM: x86: fix KVM_GET_MSR for PV EOI
Michael S. Tsirkin [Sun, 26 Aug 2012 15:00:29 +0000 (18:00 +0300)]
KVM: x86: fix KVM_GET_MSR for PV EOI

KVM_GET_MSR was missing support for PV EOI,
which is needed for migration.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
10 years agoMerge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck...
Linus Torvalds [Sun, 26 Aug 2012 20:02:51 +0000 (13:02 -0700)]
Merge tag 'hwmon-for-linus' of git://git./linux/kernel/git/groeck/linux-staging

Pull a hwmon fix from Guenter Roeck:
 "Fix sensor readings for Asus M5A78L in asus_atk0110 driver."

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (asus_atk0110) Add quirk for Asus M5A78L

10 years agokvm: Fix nonsense handling of compat ioctl
Alan Cox [Wed, 22 Aug 2012 13:34:11 +0000 (14:34 +0100)]
kvm: Fix nonsense handling of compat ioctl

KVM_SET_SIGNAL_MASK passed a NULL argument leaves the on stack signal
sets uninitialized. It then passes them through to
kvm_vcpu_ioctl_set_sigmask.

We should be passing a NULL in this case not translated garbage.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
10 years agoMerge tag 'for-linus' of git://github.com/prasad-joshi/logfs_upstream
Linus Torvalds [Sun, 26 Aug 2012 17:14:11 +0000 (10:14 -0700)]
Merge tag 'for-linus' of git://github.com/prasad-joshi/logfs_upstream

Pull LogFS bugfixes from Prasad Joshi:

 - "logfs: query block device for number of pages to send with bio"

This BUG was found when LogFS was used on KVM. The patch fixes
the problem by asking for underlaying block device the number
of pages to send with each BIO.

 - "logfs: maintain the ordering of meta-inode destruction"

LogFS maintains file system meta-data in special inodes. These
inodes are releated to each other, therefore they must be
destroyed in a proper order.

 - "logfs: initialize the number of iovecs in bio"

LogFS used to panic when it was created on an encrypted LVM
volume. The patch fixes the problem by properly initializing
the BIO.

Plus a couple more:
 - logfs: create a pagecache page if it is not present
 - logfs: destroy the reserved inodes while unmounting

* tag 'for-linus' of git://github.com/prasad-joshi/logfs_upstream:
  logfs: query block device for number of pages to send with bio
  logfs: maintain the ordering of meta-inode destruction
  logfs: create a pagecache page if it is not present
  logfs: initialize the number of iovecs in bio
  logfs: destroy the reserved inodes while unmounting

10 years agoARM: mach-pnx4008: Remove architecture
Roland Stigge [Sun, 26 Aug 2012 14:30:37 +0000 (16:30 +0200)]
ARM: mach-pnx4008: Remove architecture

This patch removes the ARM architecture mach-pnx4008. No direct support or user
feedback since 2006. Acknowledgements from NXP/Philips and Linux arm-soc
maintainers.

Signed-off-by: Roland Stigge <stigge@antcom.de>
10 years agoMerge tag 'fixes-3.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Linus Torvalds [Sun, 26 Aug 2012 00:33:33 +0000 (17:33 -0700)]
Merge tag 'fixes-3.6-rc3' of git://git./linux/kernel/git/arm/arm-soc

Pull arm-soc fixes from Arnd Bergmann:
 "Bug fixes for various ARM platforms.  About half of these are for OMAP
  and submitted before but did not make it into v3.6-rc2."

* tag 'fixes-3.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (39 commits)
  ARM: ux500: don't select LEDS_GPIO for snowball
  ARM: imx: build i.MX6 functions only when needed
  ARM: imx: select CPU_FREQ_TABLE when needed
  ARM: imx: fix ksz9021rn_phy_fixup
  ARM: imx: build pm-imx5 code only when PM is enabled
  ARM: omap: allow building omap44xx without SMP
  ARM: dts: imx51-babbage: fix esdhc cd/wp properties
  ARM: imx6: spin the cpu until hardware takes it down
  ARM: ux500: Ensure probing of Audio devices when Device Tree is enabled
  ARM: ux500: Fix merge error, no matching driver name for 'snd_soc_u8500'
  ARM i.MX6q: Add virtual 1/3.5 dividers in the LDB clock path
  ARM: Kirkwood: fix Makefile.boot
  ARM: Kirkwood: Fix iconnect leds
  ARM: Orion: Set eth packet size csum offload limit
  ARM: mv78xx0: fix win_cfg_base prototype
  ARM: OMAP: dmtimers: Fix locking issue in omap_dm_timer_request*()
  ARM: mmp: fix potential NULL dereference
  ARM: OMAP4: Register the OPP table only for 4430 device
  cpufreq: OMAP: Handle missing frequency table on SMP systems
  ARM: OMAP4: sleep: Save the complete used register stack frame
  ...