~shefty/rdma-dev.git
11 years agoMerge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6
Linus Torvalds [Fri, 29 Oct 2010 15:49:18 +0000 (08:49 -0700)]
Merge branch 'for-linus' of git://git390.marist.edu/linux-2.6

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] fix kprobes single stepping
  [S390] tape: fix dbf usage
  [S390] dasd: provide a Sense Path Group ID ioctl
  [S390] ftrace: select HAVE_C_RECORDMCOUNT
  [S390] vdso: get rid of redefinition warnings
  [S390] facility detection: remove unused variable
  [S390] hypfs: Fix error handling in hypfs_diag initialization
  [S390] topology: fix cpu masks for topology=off case
  [S390] topology: add SCHED_MC config option
  [S390] Kconfig: add machine type number to code generation options
  [S390] Add z196 machine type to setup_hwcaps

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-linus
Linus Torvalds [Fri, 29 Oct 2010 15:48:58 +0000 (08:48 -0700)]
Merge git://git./linux/kernel/git/pkl/squashfs-linus

* git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-linus:
  Squashfs: fix function prototype
  Squashfs: fix use of __le64 annotated variable

11 years agoMerge branch 'for-linus' of git://neil.brown.name/md
Linus Torvalds [Fri, 29 Oct 2010 15:47:36 +0000 (08:47 -0700)]
Merge branch 'for-linus' of git://neil.brown.name/md

* 'for-linus' of git://neil.brown.name/md:
  md: tidy up device searches in read_balance.
  md/raid1: fix some typos in comments.
  md/raid1: discard unused variable.
  md: unplug writes to external bitmaps.
  md: use separate bio pool for each md device.
  md: change type of first arg to sync_page_io.
  md/raid1: perform mem allocation before disabling writes during resync.
  md: use bio_kmalloc rather than bio_alloc when failure is acceptable.
  md: Fix possible deadlock with multiple mempool allocations.
  md: fix and update workqueue usage
  md: use sector_t in bitmap_get_counter
  md: remove md_mutex locking.
  md: Fix regression with raid1 arrays without persistent metadata.

11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
Linus Torvalds [Fri, 29 Oct 2010 15:06:25 +0000 (08:06 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (29 commits)
  braino in internal.h
  convert simple cases of nfs-related ->get_sb() to ->mount()
  convert btrfs
  convert ceph
  convert gfs2
  convert afs
  convert ecryptfs
  convert sysfs
  convert cgroup and cpuset
  switch get_sb_ns() users
  switch procfs to ->mount()
  setting ->proc_mnt doesn't belong in proc_get_sb()
  convert cifs
  convert nilfs
  switch logfs to ->mount()
  logfs: fix a leak in get_sb
  logfs get_sb, part 3
  logfs get_sb, part 2
  logfs get_sb massage, part 1
  convert v9fs
  ...

11 years agoMerge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 29 Oct 2010 15:05:33 +0000 (08:05 -0700)]
Merge branch 'sched-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched_stat: Update sched_info_queue/dequeue() code comments
  sched, cgroup: Fixup broken cgroup movement

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6
Linus Torvalds [Fri, 29 Oct 2010 15:03:48 +0000 (08:03 -0700)]
Merge git://git./linux/kernel/git/davem/sparc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  kbuild: add ARCH=sparc32 target
  sparc32: fix build failure on CONFIG_SPARC_LEON
  sparc: Fixed random SPARC/LEON SMP CPU Stuck problem.
  sparc32: remove CONFIG_HAVE_PERF_EVENTS option
  sparc: don't #include asm/system.h in asm/jump_label.h
  sparc32: Fix unaligned stack handling on trap return.
  sparc: keep calling do_signal() as long as pending signals remain

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6
Linus Torvalds [Fri, 29 Oct 2010 15:03:30 +0000 (08:03 -0700)]
Merge git://git./linux/kernel/git/davem/ide-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6:
  ide: clean up timed out request handling
  hpt366: fix clock turnaround
  hpt366: add debounce delay to cable_detect() method

11 years ago[S390] fix kprobes single stepping
Martin Schwidefsky [Fri, 29 Oct 2010 14:50:45 +0000 (16:50 +0200)]
[S390] fix kprobes single stepping

Fix kprobes after git commit 1e54622e0403891b10f2105663e0f9dd595a1f17
broke it. The kprobe_handler is now called with interrupts in the state
at the time of the breakpoint. The single step of the replaced instruction
is done with interrupts off which makes it necessary to enable and disable
the interupts in the kprobes code.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
11 years ago[S390] tape: fix dbf usage
Sebastian Ott [Fri, 29 Oct 2010 14:50:44 +0000 (16:50 +0200)]
[S390] tape: fix dbf usage

Get rid of the format string "%s" usage with volatile strings
to prevent use after free errors in the s390dbf.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
11 years ago[S390] dasd: provide a Sense Path Group ID ioctl
Stefan Weinhuber [Fri, 29 Oct 2010 14:50:43 +0000 (16:50 +0200)]
[S390] dasd: provide a Sense Path Group ID ioctl

The BIODASDSNID ioctl executes a 'Sense Path Group ID'
command on a DASD ECKD device. The returned path group data
allows user space programs to determine path state and
path group ID of the channel paths to the device.

Signed-off-by: Stefan Weinhuber <wein@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
11 years ago[S390] ftrace: select HAVE_C_RECORDMCOUNT
Heiko Carstens [Fri, 29 Oct 2010 14:50:42 +0000 (16:50 +0200)]
[S390] ftrace: select HAVE_C_RECORDMCOUNT

Select HAVE_C_RECORDMCOUNT for the fast C version of recordmcount.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
11 years ago[S390] vdso: get rid of redefinition warnings
Heiko Carstens [Fri, 29 Oct 2010 14:50:41 +0000 (16:50 +0200)]
[S390] vdso: get rid of redefinition warnings

The CLOCK_* defines in asm-offsets.c are only used for the vdso code
however in the meantime they cause other trouble.
Just rename them to get permanently rid of this:

In file included from /home2/heicarst/linux-2.6/arch/s390/include/asm/asm-offsets.h:1:0,
                 from arch/s390/mm/fault.c:33:
include/generated/asm-offsets.h:53:0: warning: "CLOCK_REALTIME" redefined
include/linux/time.h:286:0: note: this is the location of the previous definition
include/generated/asm-offsets.h:54:0: warning: "CLOCK_MONOTONIC" redefined
include/linux/time.h:287:0: note: this is the location of the previous definition

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
11 years ago[S390] facility detection: remove unused variable
Heiko Carstens [Fri, 29 Oct 2010 14:50:40 +0000 (16:50 +0200)]
[S390] facility detection: remove unused variable

arch/s390/kernel/early.c: In function 'setup_hpage':
arch/s390/kernel/early.c:285:15: warning: unused variable 'facilities'

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
11 years ago[S390] hypfs: Fix error handling in hypfs_diag initialization
Michael Holzheu [Fri, 29 Oct 2010 14:50:39 +0000 (16:50 +0200)]
[S390] hypfs: Fix error handling in hypfs_diag initialization

Fix the following two error handling bugs in hypfs_diag_init():
* No need for calling diag204_free_buffer()
* Initialize name table only in case of LPAR and prevent error message
  on non-LPAR systems.

Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
11 years ago[S390] topology: fix cpu masks for topology=off case
Heiko Carstens [Fri, 29 Oct 2010 14:50:38 +0000 (16:50 +0200)]
[S390] topology: fix cpu masks for topology=off case

Fix cpu masks for 'topology=off' case. Folding of the scheduling domains
happen in such a way that everything belongs to the MC domain instead
of the CPU doimain.
This should fix a performance regression introduced with
eafd2b6d "[S390] topology: use default MC domain initializer" and also
makes sure we have the same behavious as if CONFIG_SCHED_MC was not
selected at all.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
11 years ago[S390] topology: add SCHED_MC config option
Heiko Carstens [Fri, 29 Oct 2010 14:50:37 +0000 (16:50 +0200)]
[S390] topology: add SCHED_MC config option

This allows us to easily check for performance differences seen with
!CONFIG_SCHED_MC and topology=off.
Actually there shouldn't be any (besides a small overhead because of
additional code).

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
11 years ago[S390] Kconfig: add machine type number to code generation options
Heiko Carstens [Fri, 29 Oct 2010 14:50:36 +0000 (16:50 +0200)]
[S390] Kconfig: add machine type number to code generation options

Add machine type number to code generation options. Also clean up and
shorten quite a lot of help texts with respect to machine type and
architecture terminology.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
11 years ago[S390] Add z196 machine type to setup_hwcaps
Heiko Carstens [Fri, 29 Oct 2010 14:50:35 +0000 (16:50 +0200)]
[S390] Add z196 machine type to setup_hwcaps

Add machine type for zEnterprise 196 to elf platform detection.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
11 years agobraino in internal.h
Al Viro [Fri, 29 Oct 2010 09:49:13 +0000 (05:49 -0400)]
braino in internal.h

wrong return type...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agoconvert simple cases of nfs-related ->get_sb() to ->mount()
Al Viro [Fri, 29 Oct 2010 07:38:12 +0000 (03:38 -0400)]
convert simple cases of nfs-related ->get_sb() to ->mount()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agoconvert btrfs
Al Viro [Mon, 26 Jul 2010 12:21:33 +0000 (16:21 +0400)]
convert btrfs

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agoconvert ceph
Al Viro [Mon, 26 Jul 2010 12:17:55 +0000 (16:17 +0400)]
convert ceph

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agoconvert gfs2
Al Viro [Mon, 26 Jul 2010 12:03:58 +0000 (16:03 +0400)]
convert gfs2

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agoconvert afs
Al Viro [Mon, 26 Jul 2010 10:16:21 +0000 (14:16 +0400)]
convert afs

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agoconvert ecryptfs
Al Viro [Mon, 26 Jul 2010 09:33:36 +0000 (13:33 +0400)]
convert ecryptfs

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agoconvert sysfs
Al Viro [Mon, 26 Jul 2010 09:30:36 +0000 (13:30 +0400)]
convert sysfs

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agoconvert cgroup and cpuset
Al Viro [Mon, 26 Jul 2010 09:23:11 +0000 (13:23 +0400)]
convert cgroup and cpuset

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agoswitch get_sb_ns() users
Al Viro [Mon, 26 Jul 2010 09:16:50 +0000 (13:16 +0400)]
switch get_sb_ns() users

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agoswitch procfs to ->mount()
Al Viro [Mon, 26 Jul 2010 09:12:54 +0000 (13:12 +0400)]
switch procfs to ->mount()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agosetting ->proc_mnt doesn't belong in proc_get_sb()
Al Viro [Mon, 26 Jul 2010 09:09:36 +0000 (13:09 +0400)]
setting ->proc_mnt doesn't belong in proc_get_sb()

take that to kern_mount_data()-using callers

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agoconvert cifs
Al Viro [Mon, 26 Jul 2010 08:52:33 +0000 (12:52 +0400)]
convert cifs

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agoconvert nilfs
Al Viro [Mon, 26 Jul 2010 08:19:34 +0000 (12:19 +0400)]
convert nilfs

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agoswitch logfs to ->mount()
Al Viro [Mon, 26 Jul 2010 08:14:03 +0000 (12:14 +0400)]
switch logfs to ->mount()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agologfs: fix a leak in get_sb
Al Viro [Mon, 26 Jul 2010 08:06:00 +0000 (12:06 +0400)]
logfs: fix a leak in get_sb

a) switch ->put_device() to logfs_super *
b) actually call it on early failures in logfs_get_sb_device()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agologfs get_sb, part 3
Al Viro [Mon, 26 Jul 2010 07:53:30 +0000 (11:53 +0400)]
logfs get_sb, part 3

take logfs_get_sb_device() calls to logfs_get_sb() itself

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agologfs get_sb, part 2
Al Viro [Mon, 26 Jul 2010 07:33:39 +0000 (11:33 +0400)]
logfs get_sb, part 2

take setting s_bdev/s_mtd/s_devops to callers of logfs_get_sb_device(),
don't bother passing them separately

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agologfs get_sb massage, part 1
Al Viro [Mon, 26 Jul 2010 07:25:05 +0000 (11:25 +0400)]
logfs get_sb massage, part 1

move allocation of logfs_super to logfs_get_sb, pass it to
logfs_get_sb_...().

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agoconvert v9fs
Al Viro [Sun, 25 Jul 2010 19:56:43 +0000 (23:56 +0400)]
convert v9fs

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agoconvert ubifs
Al Viro [Sun, 25 Jul 2010 19:52:42 +0000 (23:52 +0400)]
convert ubifs

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agoconvert get_sb_pseudo() users
Al Viro [Sun, 25 Jul 2010 19:47:46 +0000 (23:47 +0400)]
convert get_sb_pseudo() users

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agoconvert get_sb_nodev() users
Al Viro [Sun, 25 Jul 2010 07:46:36 +0000 (11:46 +0400)]
convert get_sb_nodev() users

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agoconvert get_sb_single() users
Al Viro [Sat, 24 Jul 2010 21:48:30 +0000 (01:48 +0400)]
convert get_sb_single() users

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agoconvert get_sb_mtd() users to ->mount()
Al Viro [Sat, 24 Jul 2010 20:56:46 +0000 (00:56 +0400)]
convert get_sb_mtd() users to ->mount()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agonew helper: mount_bdev()
Al Viro [Sat, 24 Jul 2010 20:46:55 +0000 (00:46 +0400)]
new helper: mount_bdev()

... and switch of the obvious get_sb_bdev() users to ->mount()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agobeginning of transtion: ->mount()
Al Viro [Sat, 24 Jul 2010 20:17:56 +0000 (00:17 +0400)]
beginning of transtion: ->mount()

eventual replacement for ->get_sb() - does *not* get vfsmount,
return ERR_PTR(error) or root of subtree to be mounted.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agofix open/umount race
Al Viro [Fri, 29 Oct 2010 07:30:42 +0000 (03:30 -0400)]
fix open/umount race

nameidata_to_filp() drops nd->path or transfers it to opened
file.  In the former case it's a Bad Idea(tm) to do mnt_drop_write()
on nd->path.mnt, since we might race with umount and vfsmount in
question might be gone already.

Fix: don't drop it, then...  IOW, have nameidata_to_filp() grab nd->path
in case it transfers it to file and do path_drop() in callers.  After
they are through with accessing nd->path...

Reported-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agoa couple of open-coded ihold() introduced by nfs merge
Al Viro [Wed, 27 Oct 2010 15:00:08 +0000 (11:00 -0400)]
a couple of open-coded ihold() introduced by nfs merge

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agomd: tidy up device searches in read_balance.
NeilBrown [Mon, 6 Sep 2010 04:10:08 +0000 (14:10 +1000)]
md: tidy up device searches in read_balance.

The code for searching through the device list to read-balance in
raid1 is rather clumsy and hard to follow.  Try to simplify it a bit.

No important functionality change here.

Signed-off-by: NeilBrown <neilb@suse.de>
11 years agomd/raid1: fix some typos in comments.
NeilBrown [Tue, 26 Oct 2010 04:46:20 +0000 (15:46 +1100)]
md/raid1: fix some typos in comments.

Signed-off-by: NeilBrown <neilb@suse.de>
11 years agomd/raid1: discard unused variable.
NeilBrown [Wed, 27 Oct 2010 04:39:14 +0000 (15:39 +1100)]
md/raid1: discard unused variable.

This structure field (flushing_bio_list) is never used, so remove it.

Signed-off-by: NeilBrown <neilb@suse.de>
11 years agomd: unplug writes to external bitmaps.
NeilBrown [Wed, 27 Oct 2010 04:37:41 +0000 (15:37 +1100)]
md: unplug writes to external bitmaps.

When writing to an 'external' bitmap we don't currently unplug the
device before waiting, so we can get a 3msec delay each time;
So use REQ_UNPLUG to force and unplug.

Signed-off-by: NeilBrown <neilb@suse.de>
11 years agoMerge branch 'stable/xen-pcifront-0.8.2' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 29 Oct 2010 00:11:17 +0000 (17:11 -0700)]
Merge branch 'stable/xen-pcifront-0.8.2' of git://git./linux/kernel/git/konrad/xen
  and branch 'for-linus' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm

* 'for-linus' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm:
  xen: register xen pci notifier
  xen: initialize cpu masks for pv guests in xen_smp_init
  xen: add a missing #include to arch/x86/pci/xen.c
  xen: mask the MTRR feature from the cpuid
  xen: make hvc_xen console work for dom0.
  xen: add the direct mapping area for ISA bus access
  xen: Initialize xenbus for dom0.
  xen: use vcpu_ops to setup cpu masks
  xen: map a dummy page for local apic and ioapic in xen_set_fixmap
  xen: remap MSIs into pirqs when running as initial domain
  xen: remap GSIs as pirqs when running as initial domain
  xen: introduce XEN_DOM0 as a silent option
  xen: map MSIs into pirqs
  xen: support GSI -> pirq remapping in PV on HVM guests
  xen: add xen hvm acpi_register_gsi variant
  acpi: use indirect call to register gsi in different modes
  xen: implement xen_hvm_register_pirq
  xen: get the maximum number of pirqs from xen
  xen: support pirq != irq

* 'stable/xen-pcifront-0.8.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: (27 commits)
  X86/PCI: Remove the dependency on isapnp_disable.
  xen: Update Makefile with CONFIG_BLOCK dependency for biomerge.c
  MAINTAINERS: Add myself to the Xen Hypervisor Interface and remove Chris Wright.
  x86: xen: Sanitse irq handling (part two)
  swiotlb-xen: On x86-32 builts, select SWIOTLB instead of depending on it.
  MAINTAINERS: Add myself for Xen PCI and Xen SWIOTLB maintainer.
  xen/pci: Request ACS when Xen-SWIOTLB is activated.
  xen-pcifront: Xen PCI frontend driver.
  xenbus: prevent warnings on unhandled enumeration values
  xenbus: Xen paravirtualised PCI hotplug support.
  xen/x86/PCI: Add support for the Xen PCI subsystem
  x86: Introduce x86_msi_ops
  msi: Introduce default_[teardown|setup]_msi_irqs with fallback.
  x86/PCI: Export pci_walk_bus function.
  x86/PCI: make sure _PAGE_IOMAP it set on pci mappings
  x86/PCI: Clean up pci_cache_line_size
  xen: fix shared irq device passthrough
  xen: Provide a variant of xen_poll_irq with timeout.
  xen: Find an unbound irq number in reverse order (high to low).
  xen: statically initialize cpu_evtchn_mask_p
  ...

Fix up trivial conflicts in drivers/pci/Makefile

11 years agoMerge branch 'packaging' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek...
Linus Torvalds [Thu, 28 Oct 2010 23:19:38 +0000 (16:19 -0700)]
Merge branch 'packaging' of git://git./linux/kernel/git/mmarek/kbuild-2.6

* 'packaging' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
  scripts/package: don't break if %{_smp_mflags} isn't set
  kbuild, deb-pkg: Check if KBUILD_IMAGE exists before copying it

11 years agoMerge branch 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6
Linus Torvalds [Thu, 28 Oct 2010 23:18:59 +0000 (16:18 -0700)]
Merge branch 'misc' of git://git./linux/kernel/git/mmarek/kbuild-2.6

* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: (39 commits)
  Revert "namespace: add source file location exceptions"
  Coccinelle: Add contextual message
  Coccinelle: Fix documentation
  Coccinelle: Find doubled arguments to boolean or bit operators.
  Coccinelle: Find nested lock+irqsave functions that use the same flags variables.
  namespace: add source file location exceptions
  scripts/extract-ikconfig: add support for bzip2, lzma and lzo
  kbuild: check return value of asprintf()
  scripts/namespace.pl: improve to get more correct results
  scripts/namespace.pl: some bug fixes
  scripts/namespace.pl: update file exclusion list
  scripts/namespace.pl: fix wrong source path
  Coccinelle: Use the -no_show_diff option for org and report mode
  Coccinelle: Add a new mode named 'chain'
  Coccinelle: Use new comment format to explain kfree.cocci
  Coccinelle: Improve user information with a new kind of comment
  Coccinelle: Update documentation
  MAINTAINERS: Coccinelle: Update email address
  Documentation/kbuild: modules.txt cleanup
  Documentation/kbuild: major edit of modules.txt sections 5-8
  ...

11 years agoMerge branch 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6
Linus Torvalds [Thu, 28 Oct 2010 23:16:39 +0000 (16:16 -0700)]
Merge branch 'kconfig' of git://git./linux/kernel/git/mmarek/kbuild-2.6

* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: (38 commits)
  kbuild: convert `arch/tile' to the kconfig mainmenu upgrade
  README: cite nconfig
  Revert "kconfig: Temporarily disable dependency warnings"
  kconfig: Use PATH_MAX instead of 128 for path buffer sizes.
  kconfig: Fix realloc usage()
  kconfig: Propagate const
  kconfig: Don't go out from read config loop when you read new symbol
  kconfig: fix menuconfig on debian lenny
  kbuild: migrate all arch to the kconfig mainmenu upgrade
  kconfig: expand file names
  kconfig: use the file's name of sourced file
  kconfig: constify file name
  kconfig: don't emit warning upon rootmenu's prompt redefinition
  kconfig: replace KERNELVERSION usage by the mainmenu's prompt
  kconfig: delay gconf window initialization
  kconfig: expand by default the rootmenu's prompt
  kconfig: add a symbol string expansion helper
  kconfig: regen parser
  kconfig: implement the `mainmenu' directive
  kconfig: allow PACKAGE to be defined on the compiler's command-line
  ...

Fix up trivial conflict in arch/mn10300/Kconfig

11 years agoMerge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6
Linus Torvalds [Thu, 28 Oct 2010 22:54:04 +0000 (15:54 -0700)]
Merge branch 'for-next' of git://git./linux/kernel/git/sameo/mfd-2.6

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (73 commits)
  power: Revert "power_supply: Mark twl4030_charger as broken"
  mfd: Fix a memory leak when unload mc13xxx-core module
  mfd: Fix resource reclaim for max8998
  mfd: Remove unneeded ret value checking for max8998 register updates
  mfd: Add free max8998->ono irq in max8998_irq_exit()
  mfd: Fix resource reclaim in pcf50633_remove()
  omap4: pandaboard: fix up mmc card detect logic
  mfd: Fix ezx_pcap_probe error path
  mfd: Fix off-by-one value range checking for tps6507x
  mfd: Remove __devinitdata from tc6393xb_mmc_resources
  mfd: Add WM831x SPI support
  mfd: Factor out WM831x I2C I/O from the core driver
  mfd: Remove DEBUG defines from mc13xxx-core
  mfd: Fix jz4740_adc_set_enabled
  mfd: Add TPS658621C device ID
  mfd: Fix twl-irq function declaration warnings
  regulator: max8998 BUCK1/2 voltage change with use of GPIOs
  mfd: Voltages and GPIOs platform_data definitions for max8998
  regulator: max8998 BUCK1/2 internal voltages and indexes defined
  mfd: Support for ICs compliant with max8998
  ...

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog
Linus Torvalds [Thu, 28 Oct 2010 22:47:21 +0000 (15:47 -0700)]
Merge git://git./linux/kernel/git/wim/linux-2.6-watchdog

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  watchdog: iTCO_wdt.c: remove extra pci_dev_put()'s from init code
  watchdog: add support for Broadcom BCM63xx built-in watchdog
  watchdog: f71808e_wdt: add support for the F71889FG
  watchdog: MachZ: fix debug macro
  watchdog: it8712f_wdt: Add module parameter for alternative reset sources
  watchdog: it8712f_wdt: Add comments for config/control register names
  watchdog: it87_wdt: Add support for watchdogs with 8b timers
  watchdog: it87_wdt: Add support for IT8720F watchdog
  watchdog:  Use static const char * const where possible
  watchdog: iTCO_wdt: Cleanup warning messages
  watchdog: iTCO_wdt: TCO Watchdog patch for Intel Patsburg DeviceIDs

11 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Linus Torvalds [Thu, 28 Oct 2010 22:46:57 +0000 (15:46 -0700)]
Merge branch 'for_linus' of git://git./linux/kernel/git/tytso/ext4

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: BUG_ON fix: check if page has buffers before calling page_buffers()

11 years agowatchdog: iTCO_wdt.c: remove extra pci_dev_put()'s from init code
Prarit Bhargava [Wed, 27 Oct 2010 13:50:22 +0000 (09:50 -0400)]
watchdog: iTCO_wdt.c: remove extra pci_dev_put()'s from init code

The iTCO_wdt driver erroneously releases the pci_dev, and causes PCI hotremove
to fail because of an incorrect usage count.

The probe for this driver does a for_each_pci_dev() which gets a reference for
a pci_dev when iTCO_wdt_init() is successful.  The for_each_pci_dev() loop
puts a reference for a pci_dev when iTCO_wdt_init() fails, so the
iTCO_wdt_init() does not need to do any pci_dev_put()'s.

The only pci_dev_put() that is required is in the iTCO_wdt_cleanup() function.

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
11 years agopower: Revert "power_supply: Mark twl4030_charger as broken"
Samuel Ortiz [Thu, 28 Oct 2010 21:30:28 +0000 (23:30 +0200)]
power: Revert "power_supply: Mark twl4030_charger as broken"

The missing definitions are now in.

This reverts commit 23886839a752401aba66517bff8a8b91549279ce.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
11 years agomfd: Fix a memory leak when unload mc13xxx-core module
Axel Lin [Fri, 22 Oct 2010 10:29:21 +0000 (12:29 +0200)]
mfd: Fix a memory leak when unload mc13xxx-core module

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
11 years agomfd: Fix resource reclaim for max8998
Axel Lin [Fri, 22 Oct 2010 00:31:49 +0000 (08:31 +0800)]
mfd: Fix resource reclaim for max8998

Properly free irq and unregister max8998->rtc device in
max8998_i2c_probe() error path and max8998_i2c_remove().

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
11 years agomfd: Remove unneeded ret value checking for max8998 register updates
Axel Lin [Fri, 22 Oct 2010 00:30:26 +0000 (08:30 +0800)]
mfd: Remove unneeded ret value checking for max8998 register updates

i2c_smbus_write_byte_data() returns zero or negative value,
therefore no need to check if ret is greater than zero or not.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
11 years agomfd: Add free max8998->ono irq in max8998_irq_exit()
Axel Lin [Wed, 20 Oct 2010 09:09:56 +0000 (17:09 +0800)]
mfd: Add free max8998->ono irq in max8998_irq_exit()

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
11 years agomfd: Fix resource reclaim in pcf50633_remove()
Axel Lin [Wed, 20 Oct 2010 08:56:59 +0000 (16:56 +0800)]
mfd: Fix resource reclaim in pcf50633_remove()

Calling sysfs_remove_group() to remove sysfs entries
and unregister bl_pdev in pcf50633_remove().

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Harald Welte <laforge@gnumonks.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
11 years agoomap4: pandaboard: fix up mmc card detect logic
Menon, Nishanth [Tue, 19 Oct 2010 14:50:25 +0000 (09:50 -0500)]
omap4: pandaboard: fix up mmc card detect logic

For MMC1 Controller, card detect interrupt source is
twl6030 which is non-gpio. The card detect call back function provides
card present/absent status by reading MMC Control register present
on twl6030. This functionality was introduced in mfd tree on
track to kernel.org

Sync pandaboard to the same and make mmc work.

Cc: Tony Lindgren <tony@atomide.com>
Cc: Madhusudhan Chikkature <madhu.cr@ti.com>
Cc: Adrian Hunter <adrian.hunter@nokia.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Acked-by: Kishore Kadiyala <kishore.kadiyala@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Tested-by: Jarkko Nikula <jhnikula@gmail.com>
Acked-by: Madhusudhan Chikkature <madhu.cr@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
11 years agomfd: Fix ezx_pcap_probe error path
Axel Lin [Tue, 19 Oct 2010 12:28:24 +0000 (20:28 +0800)]
mfd: Fix ezx_pcap_probe error path

return -ENOMEM if create_singlethread_workqueue failed.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
11 years agomfd: Fix off-by-one value range checking for tps6507x
Axel Lin [Wed, 13 Oct 2010 02:44:39 +0000 (10:44 +0800)]
mfd: Fix off-by-one value range checking for tps6507x

If bytes == (TPS6507X_MAX_REGISTER + 1), we have a buffer overflow when
doing memcpy(&msg[1], src, bytes).

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
11 years agomfd: Remove __devinitdata from tc6393xb_mmc_resources
Marek Vasut [Sun, 10 Oct 2010 01:55:43 +0000 (03:55 +0200)]
mfd: Remove __devinitdata from tc6393xb_mmc_resources

This static struct resource tc6393xb_mmc_resources[] is used in resume function,
therefore the data can not be wiped after init.

Also, this causes a section mismatch.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Acked-by: Ian Molton <ian@mnementh.co.uk>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
11 years agomfd: Add WM831x SPI support
Mark Brown [Tue, 19 Oct 2010 22:00:11 +0000 (00:00 +0200)]
mfd: Add WM831x SPI support

Implement support for controlling WM831x and WM832x devices using SPI.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
11 years agomfd: Factor out WM831x I2C I/O from the core driver
Mark Brown [Tue, 19 Oct 2010 21:57:56 +0000 (23:57 +0200)]
mfd: Factor out WM831x I2C I/O from the core driver

In preparation for the addition of SPI support for the WM831x move the I2C
specific code into a separate file with a separate Kconfig option so the
I2C support can be excluded from the build.

Also update the 1133-EV1 PMIC module support for SMDK6410 to use the new
symbol.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
11 years agomfd: Remove DEBUG defines from mc13xxx-core
Samuel Ortiz [Tue, 19 Oct 2010 09:14:33 +0000 (11:14 +0200)]
mfd: Remove DEBUG defines from mc13xxx-core

DEBUG and VERBOSE_DEBUG are not used.

Reported-by: David Jander <david@protonic.nl>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
11 years agomfd: Fix jz4740_adc_set_enabled
Axel Lin [Thu, 7 Oct 2010 07:51:20 +0000 (15:51 +0800)]
mfd: Fix jz4740_adc_set_enabled

When enabled is false, clear BIT(engine) of JZ_REG_ADC_ENABLE register.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
11 years agomfd: Add TPS658621C device ID
Andrew Chew [Tue, 19 Oct 2010 09:08:36 +0000 (11:08 +0200)]
mfd: Add TPS658621C device ID

The interface for this device should be identical to that of the
TPS658521A.

Signed-off-by: Andrew Chew <achew@nvidia.com>
Acked-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
11 years agomfd: Fix twl-irq function declaration warnings
G, Manjunath Kondaiah [Tue, 19 Oct 2010 09:02:48 +0000 (11:02 +0200)]
mfd: Fix twl-irq function declaration warnings

Fixes following sparse warnings for twl4030 and twl6030 irq files.

drivers/mfd/twl4030-irq.c:783:5: warning: symbol 'twl4030_init_irq' was not
declared. Should it be static?
drivers/mfd/twl4030-irq.c:863:5: warning: symbol 'twl4030_exit_irq' was not
declared. Should it be static?
drivers/mfd/twl4030-irq.c:873:5: warning: symbol 'twl4030_init_chip_irq' was
not declared. Should it be static?

drivers/mfd/twl6030-irq.c:226:5: warning: symbol 'twl6030_init_irq' was not
declared. Should it be static?
drivers/mfd/twl6030-irq.c:290:5: warning: symbol 'twl6030_exit_irq' was not
declared. Should it be static?

Signed-off-by: G, Manjunath Kondaiah <manjugk@ti.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Tony Lindgren <tony@atomide.com>
Cc: Nishanth Menon <nm@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
11 years agoregulator: max8998 BUCK1/2 voltage change with use of GPIOs
Lukasz Majewski [Mon, 27 Sep 2010 12:32:27 +0000 (14:32 +0200)]
regulator: max8998 BUCK1/2 voltage change with use of GPIOs

max8998_pmic_probe:
- modified to check if valid pins are defined at platform
data
- maximal voltage values (predefined at platform data) are uploaded to
max8998 device

max8998_set_voltage_buck:
- BUCK1/2 voltages change between values already defined
- Checks if valid GPIO pins are passed from platform data
- If requested voltage cannot be satisfied from already defined values,
then one of free slots is used
- Predefined maximum voltages (as defined at platform data) are always
available

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
11 years agomfd: Voltages and GPIOs platform_data definitions for max8998
Lukasz Majewski [Mon, 27 Sep 2010 12:32:26 +0000 (14:32 +0200)]
mfd: Voltages and GPIOs platform_data definitions for max8998

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
11 years agoregulator: max8998 BUCK1/2 internal voltages and indexes defined
Lukasz Majewski [Mon, 27 Sep 2010 12:32:25 +0000 (14:32 +0200)]
regulator: max8998 BUCK1/2 internal voltages and indexes defined

BUCK1/2 internal voltages and indexes defined in the struct max8998_data
max_get_voltage_register now uses index values to chose proper register
More generic BUCK1/2 registers names provided

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
11 years agomfd: Support for ICs compliant with max8998
Lukasz Majewski [Mon, 27 Sep 2010 12:32:24 +0000 (14:32 +0200)]
mfd: Support for ICs compliant with max8998

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
11 years agoregulator: Separate set_voltage for max8998 ldo and buck
Lukasz Majewski [Mon, 27 Sep 2010 12:32:23 +0000 (14:32 +0200)]
regulator: Separate set_voltage for max8998 ldo and buck

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
11 years agomfd: Fix TWL4030 COR bit polarity for BCI SIH block
Grazvydas Ignotas [Tue, 28 Sep 2010 13:22:19 +0000 (16:22 +0300)]
mfd: Fix TWL4030 COR bit polarity for BCI SIH block

The chip TRM documentation contradicts itself about this bit, page 174
of swcu050e says bit should be 0 for clear-on-read behavior, while
page 487 says it should be 1. Testing shows it should be 1, so set
the .set_cor flag accordingly. This is needed for upcoming BCI
charging driver to function.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
11 years agomfd: Add devices platform data when the cell data size is not 0
Brian Harring [Mon, 18 Oct 2010 23:21:06 +0000 (01:21 +0200)]
mfd: Add devices platform data when the cell data size is not 0

When the cell data_size is 0, the resulting platform_data pointer will be
set to ZERO_SIZE_PTR. That could be misleading for device drivers running
a NULL check on thei platform_data pointer before dereferencing it.

Signed-off-by: Brian Harring <ferringb@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
11 years agomfd: Add twl4030_bci platform_data back
Grazvydas Ignotas [Fri, 1 Oct 2010 10:17:50 +0000 (13:17 +0300)]
mfd: Add twl4030_bci platform_data back

Now that we have twl4030 charger driver, add back it's platform_data
(which was removed by f7ea2dc59ed46dcd0f1cfaccda02211f4507207b
as unused).

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
11 years agortc: Add support for the rtc found in the MC13892 PMIC
Uwe Kleine-König [Thu, 28 Oct 2010 10:30:53 +0000 (12:30 +0200)]
rtc: Add support for the rtc found in the MC13892 PMIC

The mfd driver for MC13783 recently got support for MC13892 and was
renamed accordingly from mc13783-core to mc13xxx-core.  Do the same for
rtc-mc13783.

The only relevant change is to use platform id's to tell the platform bus
that this driver is responsible for mc13892-rtc devices, too.

Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
11 years agomfd: Adding twl6030 mmc card detect support for MMC1
kishore kadiyala [Fri, 24 Sep 2010 17:13:20 +0000 (17:13 +0000)]
mfd: Adding twl6030 mmc card detect support for MMC1

Adding card detect callback function and card detect configuration
function for MMC1 Controller on OMAP4.

Card detect configuration function does initial configuration of the
MMC Control & PullUp-PullDown registers of Phoenix.

For MMC1 Controller, card detect interrupt source is
twl6030 which is non-gpio. The card detect call back function provides
card present/absent status by reading MMC Control register present
on twl6030.

Since OMAP4 doesn't use any GPIO line as used in OMAP3 for card detect,
the suspend/resume initialization which was done in omap_hsmmc_gpio_init
previously is moved to the probe thus making it generic for both OMAP3 &
OMAP4.

Cc: Tony Lindgren <tony@atomide.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Madhusudhan Chikkature <madhu.cr@ti.com>
Cc: Adrian Hunter <adrian.hunter@nokia.com>
Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
11 years agomfd: Add mc13892 support to mc13xxx
Uwe Kleine-König [Tue, 28 Sep 2010 14:37:20 +0000 (16:37 +0200)]
mfd: Add mc13892 support to mc13xxx

mc13892 is the companion PMIC for Freescale's i.MX51.  It's similar enough
to mc13782 to support it in a single driver.

This patch introduces enough compatibility cruft to keep all users of the
superseded mc13783 driver unchanged.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
11 years agomfd: Remove deprecated mc13783 functions
Uwe Kleine-König [Tue, 28 Sep 2010 14:38:41 +0000 (16:38 +0200)]
mfd: Remove deprecated mc13783 functions

The last user is gone since v2.6.34-rc1~40

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
11 years agomfd: Remove obsolete mc13783 private data
Uwe Kleine-König [Tue, 28 Sep 2010 12:50:18 +0000 (14:50 +0200)]
mfd: Remove obsolete mc13783 private data

The regulator driver was converted to get the needed data directly from
platform_data by

a10099b (regulator/mc13783: various cleanups)

so regulators and num_regulators can go away.  Then apart from the flag
indicating that the adc does a conversion, flags is only a copy of the
flags member of platform_data.  This flag isn't needed to be returned by
mc13783_get_flags, so mc13783_get_flags now gets the flags from
platform_data, too and the driver private member is renamed for clearity.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
11 years agogpio: Add VIA VX855 GPIO driver
Daniel Drake [Thu, 30 Sep 2010 20:55:48 +0000 (21:55 +0100)]
gpio: Add VIA VX855 GPIO driver

This is needed for supporting the upcoming VX855 camera and OLPC DCON
drivers, as well as the advanced viafb features on non-OLPC hardware
based on this chip.

Based on earlier work by Harald Welte.

Signed-off-by: Daniel Drake <dsd@laptop.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
11 years agomfd: Add VIA VX855 multi-function device support
Daniel Drake [Thu, 30 Sep 2010 20:55:41 +0000 (21:55 +0100)]
mfd: Add VIA VX855 multi-function device support

This device has GPIO, SPI and I2C capabilities.

The hardware can be found in the OLPC XO-1.5 laptop.

Based on earlier work by Harald Welte.

Signed-off-by: Daniel Drake <dsd@laptop.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
11 years agomfd: Allow for bypass of cell resource conflict check
Daniel Drake [Thu, 30 Sep 2010 20:55:36 +0000 (21:55 +0100)]
mfd: Allow for bypass of cell resource conflict check

The upcoming VIA VX855 MFD driver needs to communicate resources
to subdevices where the resources may be claimed by ACPI.

Add a flag to mfd_cell to request that resources are not policed.

Signed-off-by: Daniel Drake <dsd@laptop.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
11 years agoinput: Monitor both onkey up and down event
Haojian Zhuang [Wed, 8 Sep 2010 13:44:35 +0000 (09:44 -0400)]
input: Monitor both onkey up and down event

Remove original 3-second ONKEY event. Detect ONKEY changing event directly.
So both UP and DOWN event of ONKEY in max8925 are monitered.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
11 years agoleds: Remove auto blink in 88pm860x
Haojian Zhuang [Wed, 8 Sep 2010 13:44:33 +0000 (09:44 -0400)]
leds: Remove auto blink in 88pm860x

88pm860x supports auto-blink LED in hardware. It messed with
timer trigger. Now disable the auto-blink function.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
11 years agomfd: Add WM8325 support
Mark Brown [Tue, 28 Sep 2010 16:13:39 +0000 (09:13 -0700)]
mfd: Add WM8325 support

The WM8325 is a PMIC for low power, high performance applications.  From
a software point of view the device is identical to the WM8320, all the
differences are at the hardware level.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
11 years agomfd: Declare abx500_remove_ops()
Mark Brown [Wed, 22 Sep 2010 13:58:30 +0000 (14:58 +0100)]
mfd: Declare abx500_remove_ops()

Otherwise sparse warns about a public symbol with no declaration and
the compiler can't spot if the callers and users have different signatures
for the function.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
11 years agomfd: Fix twl-core sparse warning
G, Manjunath Kondaiah [Tue, 21 Sep 2010 10:01:17 +0000 (15:31 +0530)]
mfd: Fix twl-core sparse warning

Fixes below sparse warning.

drivers/mfd/twl-core.c:258:20: warning: symbol 'twl_map' was not declared. Should it be static?

Signed-off-by: G, Manjunath Kondaiah <manjugk@ti.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Tony Lindgren <tony@atomide.com>
Cc: Nishanth Menon <nm@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
11 years agomfd: Use DMA for timberdale's ks8842
Richard Röjfors [Wed, 15 Sep 2010 14:49:24 +0000 (16:49 +0200)]
mfd: Use DMA for timberdale's ks8842

This patch defines platform data for the ks8842 int the timberdale
MFD.
The platform data contains DMA channels to be used by the driver.

Signed-off-by: Richard Röjfors <richard.rojfors@pelagicore.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
11 years agomfd: Add PM support to STMPE devices
Sundar Iyer [Wed, 15 Sep 2010 05:00:54 +0000 (10:30 +0530)]
mfd: Add PM support to STMPE devices

Add PM helpers to STMPE and add support to enable wakeup from low power
states

Acked-by: Rabin VINCENT <rabin.vincent@stericsson.com>
Acked-by: Linus WALLEIJ <linus.walleij@stericsson.com>
Signed-off-by: Sundar Iyer <sundar.iyer@stericsson.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
11 years agogpio: Fix stmpe error path
Vasiliy Kulikov [Sun, 12 Sep 2010 18:57:19 +0000 (22:57 +0400)]
gpio: Fix stmpe error path

Free allocated memory.  Call stmpe_disable() if it was enabled.

Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
11 years agomfd: msp430 expects I2C to be built-in
Samuel Ortiz [Sun, 19 Sep 2010 22:19:27 +0000 (00:19 +0200)]
mfd: msp430 expects I2C to be built-in

msp430 being a bool, it will only work with I2C=y

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>