~shefty/rdma-dev.git
12 years agoALSA: hda - Add reboot notifier to each codec
Takashi Iwai [Tue, 10 Nov 2009 15:02:29 +0000 (16:02 +0100)]
ALSA: hda - Add reboot notifier to each codec

Add reboot notifier to each codec so that it can do some workarounds
needed for reboot.

So far, patch_sigmatel.c calls its shutup routine for avoiding noises
at reboot on some HP machines.

References: Novell bnc#544779
http://bugzilla.novell.com/show_bug.cgi?id=544779

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - Reset pins of IDT/STAC codecs at free
Takashi Iwai [Fri, 6 Nov 2009 14:47:50 +0000 (15:47 +0100)]
ALSA: hda - Reset pins of IDT/STAC codecs at free

Some laptops cause annoying clicks or noises at shutdown/reboot since
the speaker pin is set still high.  Apply the same procedure used for
the suspend to avoid such clicks/noises for freeing the codec, too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoMerge branch 'fix/hda' into topic/hda
Takashi Iwai [Fri, 6 Nov 2009 14:45:59 +0000 (15:45 +0100)]
Merge branch 'fix/hda' into topic/hda

12 years agoALSA: hda, move hp_bseries_system
Randy Dunlap [Thu, 5 Nov 2009 17:22:30 +0000 (09:22 -0800)]
ALSA: hda, move hp_bseries_system

Function hp_bseries_system() is always used, outside of
CONFIG_ boundaries/controls, so move it.

sound/pci/hda/patch_sigmatel.c:5458: error: implicit declaration of function 'hp_bseries_system'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoMerge branch 'fix/hda' into topic/hda
Takashi Iwai [Thu, 5 Nov 2009 07:56:20 +0000 (08:56 +0100)]
Merge branch 'fix/hda' into topic/hda

12 years agoALSA: hda - Add OLPC XO-1.5 PCI ID
Daniel Drake [Wed, 4 Nov 2009 10:11:07 +0000 (10:11 +0000)]
ALSA: hda - Add OLPC XO-1.5 PCI ID

The XO-1.5 laptop now has a unique subvendor/subproduct ID, which can
be used to automatically select the correct CXT5066 configuration.

Signed-off-by: Daniel Drake <dsd@laptop.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - Enable GPIO control for mute LED on HP systems
Vitaliy Kulikov [Wed, 4 Nov 2009 06:57:45 +0000 (07:57 +0100)]
ALSA: hda - Enable GPIO control for mute LED on HP systems

This patch enables GPIO to control mute LED indicator on the HP systems
with the special string in BIOS and applies it with the correct polarity on
HP B-series systems.

It also restores configuration of the pin intended as the second Headphone
on HP B-series systems but configured as something else in the BIOS to
pass MS DTM.

Signed-off-by: Vitaliy Kulikov <Vitaliy.Kulikov@idt.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - Don't check invalid HP pin
Takashi Iwai [Mon, 2 Nov 2009 13:23:15 +0000 (14:23 +0100)]
ALSA: hda - Don't check invalid HP pin

alc_automute_pin() might be called even if any HP pin is defined, and
it will result in verbs with NID=0.

This patch adds a check for the validity of HP widget before issuing
any verbs.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda: Use quirk mask for Dell Inspiron Mini9/Vostro A90 using ALC268
Daniel T Chen [Sun, 1 Nov 2009 23:32:29 +0000 (18:32 -0500)]
ALSA: hda: Use quirk mask for Dell Inspiron Mini9/Vostro A90 using ALC268

BugLink: https://bugs.launchpad.net/bugs/368629
We should use a quirk mask for these Dell Inspiron Mini9s and Vostro
A90s, as the model=dell quirk appears to enable audio on them.

Signed-off-by: Daniel T Chen <crimsun@ubuntu.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - Switch to polling mode before disabling MSI
Takashi Iwai [Fri, 30 Oct 2009 12:21:49 +0000 (13:21 +0100)]
ALSA: hda - Switch to polling mode before disabling MSI

When any codec communication error happens, try to switch to the polling
mode first before turning off MSI.  MSI gets more stable nowadays, thus
we should keep it on as much as possible.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - Add a proper ifdef to a debug code
Takashi Iwai [Fri, 30 Oct 2009 11:31:39 +0000 (12:31 +0100)]
ALSA: hda - Add a proper ifdef to a debug code

Added a proper ifdef CONFIG_SND_DEBUG_VERBOSE to avoid a compile warning:
  sound/pci/hda/patch_intelhdmi.c:406: warning: ‘hdmi_get_channel_count’ defined but not used

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: VIA HDA: Add support for VT1818S.
Lydia Wang [Tue, 20 Oct 2009 05:18:04 +0000 (13:18 +0800)]
ALSA: VIA HDA: Add support for VT1818S.

Add support for VT1818S codec, which is similiar with VT1708S.

Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda_intel: Add the Linux device ID for NVIDIA HDA controller
peer chen [Thu, 15 Oct 2009 08:37:47 +0000 (16:37 +0800)]
ALSA: hda_intel: Add the Linux device ID for NVIDIA HDA controller

Add the generic device ID for NVIDIA HDA controller.

Signed-off-by: Peer Chen <peerchen@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - remove static intelhdmi configurations
Wu Fengguang [Fri, 30 Oct 2009 10:46:22 +0000 (11:46 +0100)]
ALSA: hda - remove static intelhdmi configurations

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - auto parse intelhdmi cvt/pin configurations
Wu Fengguang [Fri, 30 Oct 2009 10:45:35 +0000 (11:45 +0100)]
ALSA: hda - auto parse intelhdmi cvt/pin configurations

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - get intelhdmi max channels from widget caps
Wu Fengguang [Fri, 30 Oct 2009 10:45:04 +0000 (11:45 +0100)]
ALSA: hda - get intelhdmi max channels from widget caps

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - vectorize intelhdmi
Wu Fengguang [Fri, 30 Oct 2009 10:44:26 +0000 (11:44 +0100)]
ALSA: hda - vectorize intelhdmi

The Intel IbexPeak HDMI codec supports 2 converters and 3 pins,
which requires converting the cvt_nid/pin_nid to arrays.

The active pin number (the one connected with a live HDMI monitor/sink)
will be dynamically identified on hotplug events.

It exports two HDMI devices, so that user space can choose the A/V pipe
for sending the audio samples.

It's still undefined behavior when there are two active monitors
connected and routed to the same audio converter.

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - reorder intelhdmi prepare/cleanup callbacks
Wu Fengguang [Fri, 30 Oct 2009 10:43:03 +0000 (11:43 +0100)]
ALSA: hda - reorder intelhdmi prepare/cleanup callbacks

No behavior change.

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - use pcm prepare/cleanup callbacks for intelhdmi
Wu Fengguang [Fri, 30 Oct 2009 10:42:18 +0000 (11:42 +0100)]
ALSA: hda - use pcm prepare/cleanup callbacks for intelhdmi

Remove pcm callbacks open/close in favor of the prepare/cleanup.

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - remove intelhdmi dependency on multiout
Wu Fengguang [Fri, 30 Oct 2009 10:41:44 +0000 (11:41 +0100)]
ALSA: hda - remove intelhdmi dependency on multiout

We'll be managing multiple HDMI audio sources/sinks on our own.
So remove multiout dependency from intelhdmi.

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - convert intelhdmi global references to local parameters
Wu Fengguang [Fri, 30 Oct 2009 10:40:40 +0000 (11:40 +0100)]
ALSA: hda - convert intelhdmi global references to local parameters

No behavior change.

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - allow up to 4 HDMI devices
Wu Fengguang [Fri, 30 Oct 2009 10:40:03 +0000 (11:40 +0100)]
ALSA: hda - allow up to 4 HDMI devices

The new Intel HDMI codec supports 2 independant HDMI/DisplayPort pipes.
We'll be exporting them as 2 pcm devices. So bump up the allowed number
of HDMI devices.

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - vectorize get_empty_pcm_device()
Wu Fengguang [Fri, 30 Oct 2009 10:38:26 +0000 (11:38 +0100)]
ALSA: hda - vectorize get_empty_pcm_device()

This unifies the code and data structure,
and makes it easy to add more HDMI devices.

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - select IbexPeak handler for Calpella
Wu Fengguang [Fri, 30 Oct 2009 10:34:19 +0000 (11:34 +0100)]
ALSA: hda - select IbexPeak handler for Calpella

An earlier patch merely adds id for 0x80862804.
It has 2/3 cvt/pin nodes and shall be tied to the IbexPeak handler.

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - Fix capture source checks for ALC662/663 codecs
Takashi Iwai [Wed, 14 Oct 2009 16:25:23 +0000 (18:25 +0200)]
ALSA: hda - Fix capture source checks for ALC662/663 codecs

The ALC662/663 parser calls wrongly alc880_auto_create_input_ctls()
to check the capture source selections.  This should be alc882, instead.

Reference: Novell bnc#546918
http://bugzilla.novell.com/show_bug.cgi?id=546918

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: HDA VIA: Remove 48k sample rate limit for S/PDIF
Logan Li [Wed, 14 Oct 2009 02:10:38 +0000 (10:10 +0800)]
ALSA: HDA VIA: Remove 48k sample rate limit for S/PDIF

48 kHz limit is for slightly better stability, and sample rates other
than 48k (like 96k/192k) are for better sound quality.
We choose better quality, so remove the 48k limit.

Signed-off-by: Logan Li <loganli@viatech.com.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - Allow all formats as default for Nvidia HDMI
Takashi Iwai [Tue, 13 Oct 2009 14:07:59 +0000 (16:07 +0200)]
ALSA: hda - Allow all formats as default for Nvidia HDMI

In the commit f0613d5752d8f7d1d02e6d40947f38877fdf9c90
    ALSA: hda - Add full rates/formats support for Nvidia HDMI
the flag LIMITIED_RATE_FMT_SUPPORT was set as default, as I forgot
to clear before commit.

Let's enable all formats/rates as default.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - Fix volume-knob setup for Dell laptops with STAC9228
Takashi Iwai [Tue, 13 Oct 2009 13:32:21 +0000 (15:32 +0200)]
ALSA: hda - Fix volume-knob setup for Dell laptops with STAC9228

The volume-knob widget needs to be set with 0x7f instead of 0xff
for Dell laptops with STAC9228 codec, too, like the previous commit.

Reference: Novell bnc#545013
http://bugzilla.novell.com/show_bug.cgi?id=545013

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - Fix mute sound with STAC9227/9228 codecs
Takashi Iwai [Sun, 11 Oct 2009 15:38:29 +0000 (17:38 +0200)]
ALSA: hda - Fix mute sound with STAC9227/9228 codecs

On FSC laptops, the sound gets muted gradually when the volume is chnaged.
This is due to the wrong volume-knob widget setup.  The delta bit (bit 7)
shouldn't be set for these devices.

This patch adds a new quirk to set the value 0x7f to the widget 0x24
instead of 0xff.

Reference: Novell bnc#546006
http://bugzilla.novell.com/show_bug.cgi?id=546006

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - Fix overflow of spec->init_verbs in patch_realtek.c
Takashi Iwai [Tue, 13 Oct 2009 06:06:55 +0000 (08:06 +0200)]
ALSA: hda - Fix overflow of spec->init_verbs in patch_realtek.c

ALC861-VD lenovo model causes overflow of spec->init_verbs entries due to
the recent changes.  Simply increase the array size to avoid the overflow.

Reported-by: Luca Tettamanti <kronos.it@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agosound: use semicolons to end statements
Stephen Rothwell [Mon, 12 Oct 2009 04:56:17 +0000 (15:56 +1100)]
sound: use semicolons to end statements

Fixes:

sound/pci/hda/patch_via.c: In function 'patch_vt1718S':
sound/pci/hda/patch_via.c:4951: error: expected expression before 'return'
sound/pci/hda/patch_via.c: In function 'patch_vt1716S':
sound/pci/hda/patch_via.c:5441: error: expected expression before 'return'
sound/pci/hda/patch_via.c: In function 'patch_vt2002P':
sound/pci/hda/patch_via.c:5794: error: expected expression before 'return'
sound/pci/hda/patch_via.c: In function 'patch_vt1812':
sound/pci/hda/patch_via.c:6148: error: expected expression before 'return'

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: HDA VIA: Only cosmetic changes
Lydia Wang [Sat, 10 Oct 2009 11:08:55 +0000 (19:08 +0800)]
ALSA: HDA VIA: Only cosmetic changes

Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: Logan Li <loganli@viatech.com.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: HDA VIA: comments: update copyright, changeset, etc.
Lydia Wang [Sat, 10 Oct 2009 11:08:52 +0000 (19:08 +0800)]
ALSA: HDA VIA: comments: update copyright, changeset, etc.

Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: Logan Li <loganli@viatech.com.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: HDA VIA: Change PW4 connect select default to to MW0.
Lydia Wang [Sat, 10 Oct 2009 11:08:50 +0000 (19:08 +0800)]
ALSA: HDA VIA: Change PW4 connect select default to to MW0.

According to customer request, hp should be default to redirected mode,
i.e. PW4 connect select default to to MW0.

Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: Logan Li <loganli@viatech.com.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: HDA VIA: rename vt1708_control_templates[].
Lydia Wang [Sat, 10 Oct 2009 11:08:49 +0000 (19:08 +0800)]
ALSA: HDA VIA: rename vt1708_control_templates[].

To via_control_templates[].

Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: Logan Li <loganli@viatech.com.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: HDA VIA: Add VT1812 support.
Lydia Wang [Sat, 10 Oct 2009 11:08:46 +0000 (19:08 +0800)]
ALSA: HDA VIA: Add VT1812 support.

Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: Logan Li <loganli@viatech.com.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: HDA VIA: Add VT2002P support.
Lydia Wang [Sat, 10 Oct 2009 11:08:43 +0000 (19:08 +0800)]
ALSA: HDA VIA: Add VT2002P support.

Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: Logan Li <loganli@viatech.com.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: HDA VIA: Add VT1716S support.
Lydia Wang [Sat, 10 Oct 2009 11:08:41 +0000 (19:08 +0800)]
ALSA: HDA VIA: Add VT1716S support.

Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: Logan Li <loganli@viatech.com.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: HDA VIA: Add VT1828S and VT2020 support.
Lydia Wang [Sat, 10 Oct 2009 11:08:39 +0000 (19:08 +0800)]
ALSA: HDA VIA: Add VT1828S and VT2020 support.

Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: Logan Li <loganli@viatech.com.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: HDA VIA: Add VT1718S support.
Lydia Wang [Sat, 10 Oct 2009 11:08:34 +0000 (19:08 +0800)]
ALSA: HDA VIA: Add VT1718S support.

Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: Logan Li <loganli@viatech.com.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: HDA VIA: Move backdoor verbs to vt17xx_volume_init_verb
Lydia Wang [Sat, 10 Oct 2009 11:08:32 +0000 (19:08 +0800)]
ALSA: HDA VIA: Move backdoor verbs to vt17xx_volume_init_verb

As init verbs, vt17xx_volume_init_verb is a better place to hold them.

Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: Logan Li <loganli@viatech.com.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: HDA VIA: Replace MIC_BOOST_VOLUME.
Lydia Wang [Sat, 10 Oct 2009 11:08:31 +0000 (19:08 +0800)]
ALSA: HDA VIA: Replace MIC_BOOST_VOLUME.

With snd_hda_override_amp_caps.

Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: Logan Li <loganli@viatech.com.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: HDA VIA: Modify vt1709_auto_create_multi_out_ctls.
Lydia Wang [Sat, 10 Oct 2009 11:08:29 +0000 (19:08 +0800)]
ALSA: HDA VIA: Modify vt1709_auto_create_multi_out_ctls.

Rewrite nid_vol/mute assignment for clearity, and check line connection
before adding control for it.

Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: Logan Li <loganli@viatech.com.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: HDA VIA: Modify vt1708_auto_create_multi_out_ctls.
Lydia Wang [Sat, 10 Oct 2009 11:08:27 +0000 (19:08 +0800)]
ALSA: HDA VIA: Modify vt1708_auto_create_multi_out_ctls.

Rewrite nid_vol/mute assignment for clearity, and check line connection
before adding control for it.

Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: Logan Li <loganli@viatech.com.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: HDA VIA: Replace via_playback_pcm_prepare/cleanup
Lydia Wang [Sat, 10 Oct 2009 11:08:21 +0000 (19:08 +0800)]
ALSA: HDA VIA: Replace via_playback_pcm_prepare/cleanup

Replaced with via_playback_multi_pcm_prepare/cleanup to support
multi-stream operations

Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: Logan Li <loganli@viatech.com.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: HDA VIA: Modify vt1708_set_pinconfig_connect function.
Lydia Wang [Sat, 10 Oct 2009 11:08:19 +0000 (19:08 +0800)]
ALSA: HDA VIA: Modify vt1708_set_pinconfig_connect function.

like seqassoc 0xff, seqassoc 0xf0 of vt1708 should override Port
Connectivity field into 'AC_JACK_PORT_COMPLEX'

Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: Logan Li <loganli@viatech.com.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: HDA VIA: Add Jack detect feature for VT1708.
Lydia Wang [Sat, 10 Oct 2009 11:08:17 +0000 (19:08 +0800)]
ALSA: HDA VIA: Add Jack detect feature for VT1708.

VT1708 does not support unsolicited response, but we need hp detect to
automute speaker. Implemented in workqueue.

Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: Logan Li <loganli@viatech.com.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: HDA VIA: Refresh front playback mute in via_hp_automute.
Lydia Wang [Sat, 10 Oct 2009 11:08:15 +0000 (19:08 +0800)]
ALSA: HDA VIA: Refresh front playback mute in via_hp_automute.

Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: Logan Li <loganli@viatech.com.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: HDA VIA: Add VIA_JACK_EVENT process in via_unsol_event.
Lydia Wang [Sat, 10 Oct 2009 11:08:01 +0000 (19:08 +0800)]
ALSA: HDA VIA: Add VIA_JACK_EVENT process in via_unsol_event.

Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: Logan Li <loganli@viatech.com.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: HDA VIA: When changing input source, update power state.
Lydia Wang [Sat, 10 Oct 2009 11:07:55 +0000 (19:07 +0800)]
ALSA: HDA VIA: When changing input source, update power state.

Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: Logan Li <loganli@viatech.com.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: HDA VIA: Add smart5.1 function.
Lydia Wang [Sat, 10 Oct 2009 11:07:52 +0000 (19:07 +0800)]
ALSA: HDA VIA: Add smart5.1 function.

Smart 5.1 is for 3-jacks model, to reuse input pins as outputs.
While off, they act as "line out" / "line in" / "mic in".
While on, they acts as "line out" / "back left/right" / "center/lfe".

Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: Logan Li <loganli@viatech.com.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: HDA VIA: Rewrite via_independent_hp_put
Lydia Wang [Sat, 10 Oct 2009 11:07:47 +0000 (19:07 +0800)]
ALSA: HDA VIA: Rewrite via_independent_hp_put

Use hp_independent_mode_index to store hp index, and simplify function
via_independent_hp_put with it.

Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: Logan Li <loganli@viatech.com.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: HDA VIA: Change VT1708S & VT1702 hp mode controls
Lydia Wang [Sat, 10 Oct 2009 11:07:43 +0000 (19:07 +0800)]
ALSA: HDA VIA: Change VT1708S & VT1702 hp mode controls

For VT1708S and VT1702, deactivate "Headphone Playback Volume" and
"Headphone Playback Mute" control if "Independent HP" mode is OFF.
and rename VT1702 "Independent HP" text.

Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: Logan Li <loganli@viatech.com.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: HDA VIA: Remove unused argument of via_new_analog_input
Lydia Wang [Sat, 10 Oct 2009 11:07:39 +0000 (19:07 +0800)]
ALSA: HDA VIA: Remove unused argument of via_new_analog_input

Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: Logan Li <loganli@viatech.com.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: HDA VIA: Add low current mode for power saving.
Lydia Wang [Sat, 10 Oct 2009 11:07:37 +0000 (19:07 +0800)]
ALSA: HDA VIA: Add low current mode for power saving.

For VT1708B, VT1708S and VT1702, enter low current mode if no analog
stream is opened and all aa path mute.

Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: Logan Li <loganli@viatech.com.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA HDA VIA: Add VIA_CTL_WIDGET_ANALOG_MUTE control type
Lydia Wang [Sat, 10 Oct 2009 11:07:35 +0000 (19:07 +0800)]
ALSA HDA VIA: Add VIA_CTL_WIDGET_ANALOG_MUTE control type

Enter low power state if AA-Path volume is muted.

Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: Logan Li <loganli@viatech.com.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: HDA VIA: Limit VT1702 AA-Path max volume
Lydia Wang [Sat, 10 Oct 2009 11:07:32 +0000 (19:07 +0800)]
ALSA: HDA VIA: Limit VT1702 AA-Path max volume

according to customer request, VT1702 AA-Path max volume (12 dB) is too
high, so limit to 0 dB.

Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: Logan Li <loganli@viatech.com.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: HDA VIA: Add VT1708B-CE codec support.
Lydia Wang [Sat, 10 Oct 2009 11:07:29 +0000 (19:07 +0800)]
ALSA: HDA VIA: Add VT1708B-CE codec support.

Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: Logan Li <loganli@viatech.com.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: HDA VIA: Change get_codec_type argument to hda_codec type
Lydia Wang [Sat, 10 Oct 2009 11:07:26 +0000 (19:07 +0800)]
ALSA: HDA VIA: Change get_codec_type argument to hda_codec type

Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: Logan Li <loganli@viatech.com.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: HDA VIA: Remove unused IS_VT17xx_VENDORID macro
Lydia Wang [Sat, 10 Oct 2009 11:07:23 +0000 (19:07 +0800)]
ALSA: HDA VIA: Remove unused IS_VT17xx_VENDORID macro

IS_VT17*_VENDORID macros are used nowhere, so clean them up.

Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: Logan Li <loganli@viatech.com.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoMerge branch 'fix/hda' into topic/hda
Takashi Iwai [Sun, 11 Oct 2009 15:53:33 +0000 (17:53 +0200)]
Merge branch 'fix/hda' into topic/hda

12 years agoALSA: hda - Add full rates/formats support for Nvidia HDMI
Takashi Iwai [Fri, 9 Oct 2009 15:44:08 +0000 (17:44 +0200)]
ALSA: hda - Add full rates/formats support for Nvidia HDMI

Allow Nvidia HDMI to support more possible sample rates and formats.
At best, the really supported rates and formats should be determined
together with the negotiation with the HDMI receiver, but it's currently
not implemented yet (Nvidia stuff seems incompatible with HDMI 1.3
standard in this regard).  As a compromise, we enable all bits, assuming
that all recent devices do support such rates/formats.

Tested-by: Alan Alan <alanwww1@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - Fix yet another auto-mic bug in ALC268
Takashi Iwai [Wed, 7 Oct 2009 13:12:27 +0000 (15:12 +0200)]
ALSA: hda - Fix yet another auto-mic bug in ALC268

Since patch_alc268() doesn't call set_capture_mixer() (due to its h/w
design different from other siblings), it needs to call fixup_automic_adc()
explicitly to set up the auto-mic routing.  Otherwise the indices for
int/ext mics aren't set properly.

Reference: Novell bnc#544899
http://bugzilla.novell.com/show_bug.cgi?id=544899

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - Don't pick up invalid HP pins in alc_subsystem_id()
Takashi Iwai [Tue, 6 Oct 2009 11:21:54 +0000 (13:21 +0200)]
ALSA: hda - Don't pick up invalid HP pins in alc_subsystem_id()

alc_subsystem_id() tries to pick up a headphone pin if not configured,
but this caused side-effects as the problem in commit
15870f05e90a365f8022da416e713be0c5024e2f.

This patch fixes the driver behavior to pick up invalid HP pins; at least,
the pins that are listed as the primary outputs aren't taken any more.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - Add a workaround for ASUS A7K
Takashi Iwai [Tue, 6 Oct 2009 06:31:29 +0000 (08:31 +0200)]
ALSA: hda - Add a workaround for ASUS A7K

ASUS A7K needs additional GPIO1 bit setup; it has to be cleared.
Added a new fixup hook for this laptop so that it works as is.

Refernece: Novell bnc#494309
http://bugzilla.novell.com/show_bug.cgi?id=494309

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - Fix invalid initializations for ALC861 auto mode
Takashi Iwai [Mon, 5 Oct 2009 06:25:13 +0000 (08:25 +0200)]
ALSA: hda - Fix invalid initializations for ALC861 auto mode

The recent auto-parser doesn't work for machines with a single output
with ALC861, such as Toshiba laptops, because alc_subsystem_id() sets
the hp_pins[0] while it's listed in line_outs[0].
This ends up with the doubled initialization of the same mixer widget,
and it mutes the DAC route because hp_pins has no DAC assigned.

To fix this problem, just check spec->autocfg.hp_outs and speaker_outs
so that they are really detected pins.

Reference: Novell bnc#544161
http://bugzilla.novell.com/show_bug.cgi?id=544161

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - Clean up name string creation in patch_realtek.c
Takashi Iwai [Fri, 2 Oct 2009 07:20:00 +0000 (09:20 +0200)]
ALSA: hda - Clean up name string creation in patch_realtek.c

Use a common helper to create playback controls.
This gives less chance of typos.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoMerge branch 'fix/hda' into topic/hda
Takashi Iwai [Fri, 2 Oct 2009 07:19:40 +0000 (09:19 +0200)]
Merge branch 'fix/hda' into topic/hda

12 years agoALSA: hda - Fix / improve ALC66x parser
Takashi Iwai [Fri, 2 Oct 2009 07:03:58 +0000 (09:03 +0200)]
ALSA: hda - Fix / improve ALC66x parser

The auto-parser for ALC662/663/272 codecs doesn't work properly when
a speaker is connected to mono NID 0x17, and doesn't handle the dynamic
DAC assignment properly.

This patch fixes the issues and also improves the assignment of DACs
so that HP and speakers can have independent volume controls.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - Fix digita/analog mic auto-switching with IDT codecs
Takashi Iwai [Thu, 1 Oct 2009 14:38:11 +0000 (16:38 +0200)]
ALSA: hda - Fix digita/analog mic auto-switching with IDT codecs

When the auto-mic switching between an analog and a digital mic is
needed with IDT codecs, the current driver doesn't reset the connection
of the digital mux.

This patch fixes the behavior by checking both mux connections properly.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - Added quirk to enable sound on Toshiba NB200
Manoj Iyer [Tue, 22 Sep 2009 23:33:29 +0000 (18:33 -0500)]
ALSA: hda - Added quirk to enable sound on Toshiba NB200

Patch was tested on Toshiba NB200 and is found to enable sound.

Signed-off-by: Manoj Iyer <manoj.iyer@canonical.com>
Cc: stable@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - Resurrect input-source mixer of ALC268 model=acer
Takashi Iwai [Wed, 30 Sep 2009 06:13:44 +0000 (08:13 +0200)]
ALSA: hda - Resurrect input-source mixer of ALC268 model=acer

In the commit fdbc66266c21976027938642f60e0f047149a61a, I mistakenly
replaced the capture mixer array for ALC268_ACER to nosrc version
although this should be kept to alt_mixer.  Now fixed back.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - Analog Devices AD1984A add HP Touchsmart model
Miguel de Barros [Sun, 27 Sep 2009 20:11:21 +0000 (22:11 +0200)]
ALSA: hda - Analog Devices AD1984A add HP Touchsmart model

Reference: ALSA bug #0004614
https://bugtrack.alsa-project.org/alsa-bug/view.php?id=4614

port-A (0x11)      - front hp-out
port-D (0x12)      - rear line out
port-E (0x1c)      - front mic-in
port-F (0x16)      - Internal speakers
digital-mic (0x17) - Internal mic

init verbs, mixers, jack sensing and PCI_QUIRK to support this hardware

Signed-off-by: Miguel de Barros <miguel.de.barros@bluewin.ch>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - Enable MSI as default
Takashi Iwai [Mon, 28 Sep 2009 11:14:04 +0000 (13:14 +0200)]
ALSA: hda - Enable MSI as default

Since the recent kernel can handle MSI properly on non-Intel platforms,
let's enable MSI as default.

If any borken device is found, we can add the quirk entry to the list,
which is currently empty.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoMerge branch 'fix/hda' into topic/hda
Takashi Iwai [Mon, 28 Sep 2009 11:01:57 +0000 (13:01 +0200)]
Merge branch 'fix/hda' into topic/hda

12 years agoLinux 2.6.32-rc1 v2.6.32-rc1 v2.6.32-rc2
Linus Torvalds [Sun, 27 Sep 2009 21:57:48 +0000 (14:57 -0700)]
Linux 2.6.32-rc1

12 years agoalpha: Fix duplicate <asm/thread_info.h> include
Linus Torvalds [Sun, 27 Sep 2009 21:46:05 +0000 (14:46 -0700)]
alpha: Fix duplicate <asm/thread_info.h> include

.. duplicated by merging the same fix twice, for details see commit
0d9df2515dbceb67d343c0f10fd3ff218380d524 ("Merge
git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes")

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agotty: Fix regressions caused by commit b50989dc
Dave Young [Sun, 27 Sep 2009 16:00:42 +0000 (16:00 +0000)]
tty: Fix regressions caused by commit b50989dc

The following commit made console open fails while booting:

commit b50989dc444599c8b21edc23536fc305f4e9b7d5
Author: Alan Cox <alan@linux.intel.com>
Date:   Sat Sep 19 13:13:22 2009 -0700

tty: make the kref destructor occur asynchronously

Due to tty release routines run in a workqueue now, error like the
following will be reported while booting:

INIT open /dev/console Input/output error

It also causes hibernation regression to appear as reported at
http://bugzilla.kernel.org/show_bug.cgi?id=14229

The reason is that now there's latency issue with closing, but when
we open a "closing not finished" tty, -EIO will be returned.

Fix it as per the following Alan's suggestion:

  Fun but it's actually not a bug and the fix is wrong in itself as
  the port may be closing but not yet being destructed, in which case
  it seems to do the wrong thing.  Opening a tty that is closing (and
  could be closing for long periods) is supposed to return -EIO.

  I suspect a better way to deal with this and keep the old console
  timing is to split tty->shutdown into two functions.

  tty->shutdown() - called synchronously just before we dump the tty
  onto the waitqueue for destruction

  tty->cleanup() - called when the destructor runs.

  We would then do the shutdown part which can occur in IRQ context
  fine, before queueing the rest of the release (from tty->magic = 0
  ...  the end) to occur asynchronously

  The USB update in -next would then need a call like

       if (tty->cleanup)
               tty->cleanup(tty);

  at the top of the async function and the USB shutdown to be split
  between shutdown and cleanup as the USB resource cleanup and final
  tidy cannot occur synchronously as it needs to sleep.

  In other words the logic becomes

       final kref put
               make object unfindable

       async
               clean it up

Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
[ rjw: Rebased on top of 2.6.31-git, reworked the changelog. ]
Signed-off-by: "Rafael J. Wysocki" <rjw@sisk.pl>
[ Changed serial naming to match new rules, dropped tty_shutdown as per
  comments from Alan Stern  - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoACPI: kill "unused variable ‘i’" warning
Linus Torvalds [Sun, 27 Sep 2009 18:58:36 +0000 (11:58 -0700)]
ACPI: kill "unused variable ‘i’" warning

Commit 3d5b6fb47a8e68fa311ca2c3447e7f8a7c3a9cf3 ("ACPI: Kill overly
verbose "power state" log messages") removed the actual use of this
variable, but didn't remove the variable itself, resulting in build
warnings like

  drivers/acpi/processor_idle.c: In function ‘acpi_processor_power_init’:
  drivers/acpi/processor_idle.c:1169: warning: unused variable ‘i’

Just get rid of the now unused variable.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoconst: mark struct vm_struct_operations
Alexey Dobriyan [Sun, 27 Sep 2009 18:29:37 +0000 (22:29 +0400)]
const: mark struct vm_struct_operations

* mark struct vm_area_struct::vm_ops as const
* mark vm_ops in AGP code

But leave TTM code alone, something is fishy there with global vm_ops
being used.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoMerge branch 'timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sun, 27 Sep 2009 17:39:04 +0000 (10:39 -0700)]
Merge branch 'timers-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  hrtimer: Eliminate needless reprogramming of clock events device

12 years agoMerge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux...
Linus Torvalds [Sun, 27 Sep 2009 17:38:48 +0000 (10:38 -0700)]
Merge branch 'release' of git://git./linux/kernel/git/lenb/linux-acpi-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPI: IA64=y ACPI=n build fix
  ACPI: Kill overly verbose "power state" log messages
  ACPI: fix Compaq Evo N800c (Pentium 4m) boot hang regression
  ACPI: Clarify resource conflict message
  thinkpad-acpi: fix CONFIG_THINKPAD_ACPI_HOTKEY_POLL build problem

12 years agoMerge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sun, 27 Sep 2009 17:38:34 +0000 (10:38 -0700)]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Fix hwpoison code related build failure on 32-bit NUMAQ

12 years agoACPI: IA64=y ACPI=n build fix
Len Brown [Sun, 27 Sep 2009 08:17:21 +0000 (04:17 -0400)]
ACPI: IA64=y ACPI=n build fix

ia64's sim_defconfig uses CONFIG_ACPI=n
which now #define's acpi_disabled in <linux/acpi.h>

So we shouldn't re-define it here in <asm/acpi.h>

Signed-off-by: Len Brown <len.brown@intel.com>
12 years agoACPI: Kill overly verbose "power state" log messages
Roland Dreier [Thu, 24 Sep 2009 21:52:36 +0000 (14:52 -0700)]
ACPI: Kill overly verbose "power state" log messages

I was recently lucky enough to get a 64-CPU system, so my kernel log
ends up with 64 lines like:

    ACPI: CPU0 (power states: C1[C1] C2[C3])

This is pretty useless clutter because this info is already available
after boot from both /sys/devices/system/cpu/cpu*/cpuidle/state?/ as
well as /proc/acpi/processor/CPU*/power.

So just delete the code that prints the C-states in processor_idle.c.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Len Brown <len.brown@intel.com>
12 years agox86: Fix hwpoison code related build failure on 32-bit NUMAQ
Linus Torvalds [Sat, 26 Sep 2009 16:35:07 +0000 (09:35 -0700)]
x86: Fix hwpoison code related build failure on 32-bit NUMAQ

This build failure triggers:

 In file included from include/linux/suspend.h:8,
                 from arch/x86/kernel/asm-offsets_32.c:11,
                 from arch/x86/kernel/asm-offsets.c:2:
 include/linux/mm.h:503:2: error: #error SECTIONS_WIDTH+NODES_WIDTH+ZONES_WIDTH > BITS_PER_LONG - NR_PAGEFLAGS

Because due to the hwpoison page flag we ran out of page
flags on 32-bit.

Dont turn on hwpoison on 32-bit NUMA (it's rare in any
case).

Also clean up the Kconfig dependencies in the generic MM
code by introducing ARCH_SUPPORTS_MEMORY_FAILURE.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
12 years agoACPI: fix Compaq Evo N800c (Pentium 4m) boot hang regression
Zhao Yakui [Sun, 27 Sep 2009 07:30:51 +0000 (03:30 -0400)]
ACPI: fix Compaq Evo N800c (Pentium 4m) boot hang regression

Don't disable ARB_DISABLE when the familary ID is 0x0F.

http://bugzilla.kernel.org/show_bug.cgi?id=14211

This was a 2.6.31 regression, and so this patch
needs to be applied to 2.6.31.stable

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
12 years agoACPI: Clarify resource conflict message
Jean Delvare [Tue, 8 Sep 2009 13:31:46 +0000 (15:31 +0200)]
ACPI: Clarify resource conflict message

The message "ACPI: Device needs an ACPI driver" is misleading. The
device _may_ need an ACPI driver, if the BIOS implemented a custom
API for the device in question (which, AFAIK, can't be checked.) If
not, then either a generic ACPI driver may be used (for example
"thermal"), or nothing can be done (other than a white list).

I propose to reword the message to:

ACPI: If an ACPI driver is available for this device, you should use
it instead of the native driver

which I think is more correct. Comments and suggestions welcome.

I also added a message warning about possible problems and system
instability when users pass acpi_enforce_resources=lax, as suggested
by Len.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Thomas Renninger <trenn@suse.de>
Cc: Alan Jenkins <sourcejedi.lkml@googlemail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
12 years agothinkpad-acpi: fix CONFIG_THINKPAD_ACPI_HOTKEY_POLL build problem
Henrique de Moraes Holschuh [Sun, 27 Sep 2009 00:42:49 +0000 (21:42 -0300)]
thinkpad-acpi: fix CONFIG_THINKPAD_ACPI_HOTKEY_POLL build problem

Fix this problem when CONFIG_THINKPAD_ACPI_HOTKEY_POLL is undefined:

  CHECK   drivers/platform/x86/thinkpad_acpi.c
drivers/platform/x86/thinkpad_acpi.c:1968:21: error: not an lvalue
  CC [M]  drivers/platform/x86/thinkpad_acpi.o
drivers/platform/x86/thinkpad_acpi.c: In function 'tpacpi_hotkey_driver_mask_set':
drivers/platform/x86/thinkpad_acpi.c:1968: error: lvalue required as left operand of assignment

Reported-by: Noah Dain <noahdain@gmail.com>
Reported-by: Audrius Kazukauskas <audrius@neutrino.lt>
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
12 years agoMerge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
Linus Torvalds [Sat, 26 Sep 2009 20:39:21 +0000 (13:39 -0700)]
Merge branch 'release' of git://git./linux/kernel/git/aegl/linux-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] implement ticket locks for Itanium

12 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes
Linus Torvalds [Sat, 26 Sep 2009 17:51:54 +0000 (10:51 -0700)]
Merge git://git./linux/kernel/git/sam/kbuild-fixes

* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes:
  alpha: fix build after vmlinux.lds.S cleanup
  mips: fix build of vmlinux.lds

12 years agoMerge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds
Linus Torvalds [Sat, 26 Sep 2009 17:50:47 +0000 (10:50 -0700)]
Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds

* 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds:
  leds: move leds-clevo-mail's probe function to .devinit.text
  leds: Fix indentation in LEDS_LP3944 Kconfig entry
  leds: Fix LED names
  leds: Fix leds-pca9532 whitespace issues
  leds: fix coding style in worker thread code for ledtrig-gpio.
  leds: gpio-leds: fix typographics fault
  leds: Add WM831x status LED driver

12 years agoMerge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlight
Linus Torvalds [Sat, 26 Sep 2009 17:49:42 +0000 (10:49 -0700)]
Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlight

* 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlight:
  backlight: new driver for ADP5520/ADP5501 MFD PMICs
  backlight: extend event support to also support poll()
  backlight/eeepc-laptop: Update the backlight state when we change brightness
  backlight/acpi: Update the backlight state when we change brightness
  backlight: Allow drivers to update the core, and generate events on changes
  backlight: switch to da903x driver to dev_pm_ops
  backlight: Add support for the Avionic Design Xanthos backlight device.
  backlight: spi driver for LMS283GF05 LCD
  backlight: move hp680-bl's probe function to .devinit.text
  backlight: Add support for new Apple machines.
  backlight: mbp_nvidia_bl: add support for MacBookAir 1,1
  backlight: Add WM831x backlight driver

Trivial conflicts due to '#ifdef CONFIG_PM' differences in
drivers/video/backlight/da903x_bl.c

12 years agoheaders: kref.h redux
Alexey Dobriyan [Sat, 26 Sep 2009 15:37:22 +0000 (19:37 +0400)]
headers: kref.h redux

* remove asm/atomic.h inclusion from kref.h -- not needed, linux/types.h
  is enough for atomic_t
* remove linux/kref.h inclusion from files which do not need it.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoMerge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sat, 26 Sep 2009 17:15:53 +0000 (10:15 -0700)]
Merge branch 'core-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  futex: Add memory barrier commentary to futex_wait_queue_me()
  futex: Fix wakeup race by setting TASK_INTERRUPTIBLE before queue_me()
  futex: Correct futex_q woken state commentary
  futex: Make function kernel-doc commentary consistent
  futex: Correct queue_me and unqueue_me commentary
  futex: Correct futex_wait_requeue_pi() commentary

12 years agoMerge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sat, 26 Sep 2009 17:15:33 +0000 (10:15 -0700)]
Merge branch 'perf-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf tools: Dont use openat()
  perf tools: Fix buffer allocation
  perf tools: .gitignore += perf*.html
  perf tools: Handle relative paths while loading module symbols
  perf tools: Fix module symbol loading bug
  perf_event, x86: Fix 'perf sched record' crashing the machine
  perf_event: Update PERF_EVENT_FORK header definition
  perf stat: Fix zero total printouts

12 years agoMerge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sat, 26 Sep 2009 17:14:41 +0000 (10:14 -0700)]
Merge branch 'timers-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  clocksource: Resume clocksource without taking the clocksource mutex

12 years agoMerge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sat, 26 Sep 2009 17:13:54 +0000 (10:13 -0700)]
Merge branch 'tracing-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  modules, tracing: Remove stale struct marker signature from module_layout()
  tracing/workqueue: Use %pf in workqueue trace events
  tracing: Fix a comment and a trivial format issue in tracepoint.h
  tracing: Fix failure path in ftrace_regex_open()
  tracing: Fix failure path in ftrace_graph_write()
  tracing: Check the return value of trace_get_user()
  tracing: Fix off-by-one in trace_get_user()

12 years agoMerge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sat, 26 Sep 2009 17:13:35 +0000 (10:13 -0700)]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Remove redundant non-NUMA topology functions
  x86: early_printk: Protect against using the same device twice
  x86: Reduce verbosity of "PAT enabled" kernel message
  x86: Reduce verbosity of "TSC is reliable" message
  x86: mce: Use safer ways to access MCE registers
  x86: mce, inject: Use real inject-msg in raise_local
  x86: mce: Fix thermal throttling message storm
  x86: mce: Clean up thermal throttling state tracking code
  x86: split NX setup into separate file to limit unstack-protected code
  xen: check EFER for NX before setting up GDT mapping
  x86: Cleanup linker script using new linker script macros.
  x86: Use section .data.page_aligned for the idt_table.
  x86: convert to use __HEAD and HEAD_TEXT macros.
  x86: convert compressed loader to use __HEAD and HEAD_TEXT macros.
  x86: fix fragile computation of vsyscall address

12 years agoMerge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux...
Linus Torvalds [Sat, 26 Sep 2009 17:12:03 +0000 (10:12 -0700)]
Merge branch 'release' of git://git./linux/kernel/git/lenb/linux-acpi-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (32 commits)
  ACPI: i2c-scmi: don't use acpi_device_uid()
  ACPI: simplify building device HID/CID list
  ACPI: remove acpi_device_uid() and related stuff
  ACPI: remove acpi_device.flags.hardware_id
  ACPI: remove acpi_device.flags.compatible_ids
  ACPI: maintain a single list of _HID and _CID IDs
  ACPI: make sure every acpi_device has an ID
  ACPI: use acpi_device_hid() when possible
  ACPI: fix synthetic HID for \_SB_
  ACPI: handle re-enumeration, when acpi_devices might already exist
  ACPI: factor out device type and status checking
  ACPI: add acpi_bus_get_status_handle()
  ACPI: use acpi_walk_namespace() to enumerate devices
  ACPI: identify device tree root by null parent pointer, not ACPI_BUS_TYPE
  ACPI: enumerate namespace before adding functional fixed hardware devices
  ACPI: convert acpi_bus_scan() to operate on an acpi_handle
  ACPI: add acpi_bus_get_parent() and remove "parent" arguments
  ACPI: remove unnecessary argument checking
  ACPI: remove redundant "type" arguments
  ACPI: remove acpi_device_set_context() "type" argument
  ...