~shefty/rdma-dev.git
8 years agoMerge branch 'pm-cpufreq'
Rafael J. Wysocki [Sun, 17 Feb 2013 13:38:13 +0000 (14:38 +0100)]
Merge branch 'pm-cpufreq'

* pm-cpufreq:
  cpufreq / intel_pstate: Add kernel command line option disable intel_pstate.
  cpufreq / intel_pstate: Change to disallow module build

8 years agocpufreq / intel_pstate: Add kernel command line option disable intel_pstate.
Dirk Brandewie [Fri, 15 Feb 2013 21:55:10 +0000 (22:55 +0100)]
cpufreq / intel_pstate: Add kernel command line option disable intel_pstate.

When intel_pstate is configured into the kernel it will become the
preferred scaling driver for processors that it supports.  Allow the
user to override this by adding:
   intel_pstate=disable
on the kernel command line.

Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
8 years agocpufreq / intel_pstate: Change to disallow module build
Dirk Brandewie [Thu, 14 Feb 2013 21:55:34 +0000 (22:55 +0100)]
cpufreq / intel_pstate: Change to disallow module build

Load order is important in order for intel_pstate to take over as the
default scaling driver from acpi-cpufreq.

If both are built-in, acpi-cpufreq uses late_initcall() and
intel_pstate uses device_initcall() so it will be able to register as
the scaling before acpi-cpufreq for the processors supported by
intel_pstate.

If acpi-cpufreq is built as a module then intel_pstate still gets
first option to become the scaling driver.

Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
8 years agoMerge branch 'next/cpufreq-exynos' of git://git.kernel.org/pub/scm/linux/kernel/git...
Rafael J. Wysocki [Fri, 15 Feb 2013 13:00:15 +0000 (14:00 +0100)]
Merge branch 'next/cpufreq-exynos' of git://git./linux/kernel/git/kgene/linux-samsung

* 'next/cpufreq-exynos' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  cpufreq: exynos: Fix hang in pm handler due to frequency mismatch
  cpufreq: exynos: Initialize return variable
  cpufreq: exynos: Fix unsigned variable being checked for negative value
  cpufreq: exynos: Get booting freq value in exynos_cpufreq_init
  cpufreq: exynos: Show list of available frequencies
  cpufreq: exynos: Add missing static
  cpufreq: exynos: Split exynos_target function into two functions
  cpufreq: exynos: Use APLL_FREQ macro for cpu divider value
  cpufreq: exynos: Check old & new frequency early
  cpufreq: exynos: Remove unused variable & IS_ERR

8 years agoMerge branch 'pm-cpufreq'
Rafael J. Wysocki [Fri, 15 Feb 2013 12:59:07 +0000 (13:59 +0100)]
Merge branch 'pm-cpufreq'

* pm-cpufreq: (55 commits)
  cpufreq / intel_pstate: Fix 32 bit build
  cpufreq: conservative: Fix typos in comments
  cpufreq: ondemand: Fix typos in comments
  cpufreq: exynos: simplify .init() for setting policy->cpus
  cpufreq: kirkwood: Add a cpufreq driver for Marvell Kirkwood SoCs
  cpufreq/x86: Add P-state driver for sandy bridge.
  cpufreq_stats: do not remove sysfs files if frequency table is not present
  cpufreq: Do not track governor name for scaling drivers with internal governors.
  cpufreq: Only call cpufreq_out_of_sync() for driver that implement cpufreq_driver.target()
  cpufreq: Retrieve current frequency from scaling drivers with internal governors
  cpufreq: Fix locking issues
  cpufreq: Create a macro for unlock_policy_rwsem{read,write}
  cpufreq: Remove unused HOTPLUG_CPU code
  cpufreq: governors: Fix WARN_ON() for multi-policy platforms
  cpufreq: ondemand: Replace down_differential tuner with adj_up_threshold
  cpufreq / stats: Get rid of CPUFREQ_STATDEVICE_ATTR
  cpufreq: Don't check cpu_online(policy->cpu)
  cpufreq: add imx6q-cpufreq driver
  cpufreq: Don't remove sysfs link for policy->cpu
  cpufreq: Remove unnecessary use of policy->shared_type
  ...

8 years agoMerge branch 'pm-tools'
Rafael J. Wysocki [Fri, 15 Feb 2013 12:59:00 +0000 (13:59 +0100)]
Merge branch 'pm-tools'

* pm-tools:
  ACPI tools / acpidump: must be run as root - install it into /usr/sbin

8 years agoMerge branch 'pm-assorted'
Rafael J. Wysocki [Fri, 15 Feb 2013 12:58:54 +0000 (13:58 +0100)]
Merge branch 'pm-assorted'

* pm-assorted:
  suspend: enable freeze timeout configuration through sys
  ACPI: enable ACPI SCI during suspend
  PM: Introduce suspend state PM_SUSPEND_FREEZE
  PM / Runtime: Add new helper function: pm_runtime_active()
  PM / tracing: remove deprecated power trace API
  PM: don't use [delayed_]work_pending()
  PM / Domains: don't use [delayed_]work_pending()

8 years agoMerge branch 'acpi-assorted'
Rafael J. Wysocki [Fri, 15 Feb 2013 12:58:43 +0000 (13:58 +0100)]
Merge branch 'acpi-assorted'

* acpi-assorted:
  ACPI: Add DMI entry for Sony VGN-FW41E_H
  ACPI: fix obsolete comment in custom_method.c
  ACPI / thermal: Use mode to enable/disable kernel thermal processing
  ACPI thermal: remove unnecessary newline from exception message
  ACPI sysfs: remove unnecessary newline from exception
  ACPI video: remove unnecessary newline from error messages
  ACPI: SRAT: report non-volatile memory in debug
  ACPI: Rework acpi_get_child() to be more efficient

8 years agoMerge branch 'acpi-cleanup'
Rafael J. Wysocki [Fri, 15 Feb 2013 12:58:30 +0000 (13:58 +0100)]
Merge branch 'acpi-cleanup'

* acpi-cleanup: (21 commits)
  ACPI / hotplug: Fix concurrency issues and memory leaks
  ACPI: Remove the use of CONFIG_ACPI_CONTAINER_MODULE
  ACPI / scan: Full transition to D3cold in acpi_device_unregister()
  ACPI / scan: Make acpi_bus_hot_remove_device() acquire the scan lock
  ACPI: Drop the container.h header file
  ACPI / Documentation: refer to correct file for acpi_platform_device_ids[] table
  ACPI / scan: Make container driver use struct acpi_scan_handler
  ACPI / scan: Remove useless #ifndef from acpi_eject_store()
  ACPI: Unbind ACPI drv when probe failed
  ACPI: sysfs eject support for ACPI scan handlers
  ACPI / scan: Follow priorities of IDs when matching scan handlers
  ACPI / PCI: pci_slot: replace printk(KERN_xxx) with pr_xxx()
  ACPI / dock: Fix acpi_bus_get_device() check in drivers/acpi/dock.c
  ACPI / scan: Clean up acpi_bus_get_parent()
  ACPI / platform: Use struct acpi_scan_handler for creating devices
  ACPI / PCI: Make PCI IRQ link driver use struct acpi_scan_handler
  ACPI / PCI: Make PCI root driver use struct acpi_scan_handler
  ACPI / scan: Introduce struct acpi_scan_handler
  ACPI / scan: Make scanning of fixed devices follow the general scheme
  ACPI: Drop device start operation that is not used
  ...

8 years agoACPI / hotplug: Fix concurrency issues and memory leaks
Rafael J. Wysocki [Wed, 13 Feb 2013 13:36:47 +0000 (14:36 +0100)]
ACPI / hotplug: Fix concurrency issues and memory leaks

This changeset is aimed at fixing a few different but related
problems in the ACPI hotplug infrastructure.

First of all, since notify handlers may be run in parallel with
acpi_bus_scan(), acpi_bus_trim() and acpi_bus_hot_remove_device()
and some of them are installed for ACPI handles that have no struct
acpi_device objects attached (i.e. before those objects are created),
those notify handlers have to take acpi_scan_lock to prevent races
from taking place (e.g. a struct acpi_device is found to be present
for the given ACPI handle, but right after that it is removed by
acpi_bus_trim() running in parallel to the given notify handler).
Moreover, since some of them call acpi_bus_scan() and
acpi_bus_trim(), this leads to the conclusion that acpi_scan_lock
should be acquired by the callers of these two funtions rather by
these functions themselves.

For these reasons, make all notify handlers that can handle device
addition and eject events take acpi_scan_lock and remove the
acpi_scan_lock locking from acpi_bus_scan() and acpi_bus_trim().
Accordingly, update all of their users to make sure that they
are always called under acpi_scan_lock.

Furthermore, since eject operations are carried out asynchronously
with respect to the notify events that trigger them, with the help
of acpi_bus_hot_remove_device(), even if notify handlers take the
ACPI scan lock, it still is possible that, for example,
acpi_bus_trim() will run between acpi_bus_hot_remove_device() and
the notify handler that scheduled its execution and that
acpi_bus_trim() will remove the device node passed to
acpi_bus_hot_remove_device() for ejection.  In that case, the struct
acpi_device object obtained by acpi_bus_hot_remove_device() will be
invalid and not-so-funny things will ensue.  To protect agaist that,
make the users of acpi_bus_hot_remove_device() run get_device() on
ACPI device node objects that are about to be passed to it and make
acpi_bus_hot_remove_device() run put_device() on them and check if
their ACPI handles are not NULL (make acpi_device_unregister() clear
the device nodes' ACPI handles for that check to work).

Finally, observe that acpi_os_hotplug_execute() actually can fail,
in which case its caller ought to free memory allocated for the
context object to prevent leaks from happening.  It also needs to
run put_device() on the device node that it ran get_device() on
previously in that case.  Modify the code accordingly.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
8 years agoACPI: Remove the use of CONFIG_ACPI_CONTAINER_MODULE
Toshi Kani [Mon, 11 Feb 2013 22:33:20 +0000 (22:33 +0000)]
ACPI: Remove the use of CONFIG_ACPI_CONTAINER_MODULE

config ACPI_CONTAINER has been changed to bool (y/n), and its
module option is no longer valid.  So, remove the use of
CONFIG_ACPI_CONTAINER_MODULE.

Signed-off-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
8 years agoACPI / scan: Full transition to D3cold in acpi_device_unregister()
Rafael J. Wysocki [Sat, 9 Feb 2013 14:29:20 +0000 (15:29 +0100)]
ACPI / scan: Full transition to D3cold in acpi_device_unregister()

In order to drop reference counts of all power resources used by an
ACPI device node being removed, acpi_device_unregister() calls
acpi_power_transition(device, ACPI_STATE_D3_COLD), which effectively
transitions the device node into D3cold if it uses any power
resources.  However, for some device nodes it may not be appropriate
to remove power from them entirely before putting them into D3hot
before.  On the other hand, executing _PS3 for devices that don't
use power resources before removing them shouldn't really hurt.
In fact, that is done by acpi_bus_hot_remove_device(), but this is
not the right place to do it, because the bus trimming may have
caused power to be removed from the device node in question already
before.

For these reasons, make acpi_device_unregister() carry out full
power-off transition for all device nodes supporting that and remove
the direct evaluation of _PS3 from acpi_bus_hot_remove_device().

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
8 years agoACPI / scan: Make acpi_bus_hot_remove_device() acquire the scan lock
Rafael J. Wysocki [Sat, 9 Feb 2013 14:29:11 +0000 (15:29 +0100)]
ACPI / scan: Make acpi_bus_hot_remove_device() acquire the scan lock

The ACPI scan lock has been introduced to prevent acpi_bus_scan()
and acpi_bus_trim() from running in parallel with each other for
overlapping ACPI namespace scopes.  However, it is not sufficient
to do that, because if acpi_bus_scan() is run (for an overlapping
namespace scope) right after the acpi_bus_trim() in
acpi_bus_hot_remove_device(), the subsequent eject will remove
devices without removing the corresponding struct acpi_device
objects (and possibly companion "physical" device objects).
Therefore acpi_bus_hot_remove_device() has to acquire the scan
lock before carrying out the bus trimming and hold it through
the evaluation of _EJ0, so make that happen.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Toshi Kani <toshi.kani@hp.com>
8 years agoACPI: Drop the container.h header file
Rafael J. Wysocki [Sat, 9 Feb 2013 00:08:20 +0000 (01:08 +0100)]
ACPI: Drop the container.h header file

The include/acpi/container.h only contains a definition of a
structure that is not used any more, so drop it entirely.

Similar change was proposed earlier by Toshi Kani.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Toshi Kani <toshi.kani@hp.com>
8 years agoACPI / Documentation: refer to correct file for acpi_platform_device_ids[] table
Mika Westerberg [Fri, 8 Feb 2013 23:00:13 +0000 (00:00 +0100)]
ACPI / Documentation: refer to correct file for acpi_platform_device_ids[] table

When the ACPI platform device code was converted to the new ACPI scan
handler facility, the the acpi_platform_device_ids[] was moved to
drivers/acpi/acpi_platform.c. Update the documentation accordingly.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
8 years agoACPI / scan: Make container driver use struct acpi_scan_handler
Rafael J. Wysocki [Fri, 8 Feb 2013 22:52:39 +0000 (23:52 +0100)]
ACPI / scan: Make container driver use struct acpi_scan_handler

Make the ACPI container driver use struct acpi_scan_handler for
representing the object used to initialize ACPI containers and remove
the ACPI driver structure used previously and the data structures
created by it, since in fact they were not used for any purpose.

This simplifies the code and reduces the kernel's memory footprint by
avoiding the registration of a struct device_driver object with the
driver core and creation of its sysfs directory which is unnecessary.

In addition to that, make the namespace walk callback used for
installing the notify handlers for ACPI containers more
straightforward.

This change includes fixes from Toshi Kani.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Tested-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Reviewed-by: Toshi Kani <toshi.kani@hp.com>
Tested-by: Toshi Kani <toshi.kani@hp.com>
8 years agoACPI / scan: Remove useless #ifndef from acpi_eject_store()
Rafael J. Wysocki [Fri, 8 Feb 2013 22:52:23 +0000 (23:52 +0100)]
ACPI / scan: Remove useless #ifndef from acpi_eject_store()

Since the FORCE_EJECT symbol is never defined, the
#ifndef FORCE_EJECT in acpi_eject_store() is always true, so drop it.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Tested-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Reviewed-by: Toshi Kani <toshi.kani@hp.com>
Tested-by: Toshi Kani <toshi.kani@hp.com>
8 years agoACPI: Unbind ACPI drv when probe failed
Toshi Kani [Thu, 7 Feb 2013 21:19:13 +0000 (21:19 +0000)]
ACPI: Unbind ACPI drv when probe failed

When acpi_device_install_notify_handler() failed in acpi_device_probe(),
it calls acpi_drv->ops.remove() and fails the probe.  However, the ACPI
driver is left bound to the acpi_device.  Fix it by clearing the driver
and driver_data fields.

Signed-off-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
8 years agoACPI: sysfs eject support for ACPI scan handlers
Toshi Kani [Thu, 7 Feb 2013 11:50:53 +0000 (12:50 +0100)]
ACPI: sysfs eject support for ACPI scan handlers

Changed sysfs eject, acpi_eject_store(), so that it doesn't return
error codes for devices nodes with ACPI scan handlers attached and
no ACPI drivers.

[rjw: Changelog]
Signed-off-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
8 years agoACPI / scan: Follow priorities of IDs when matching scan handlers
Rafael J. Wysocki [Wed, 6 Feb 2013 12:05:22 +0000 (13:05 +0100)]
ACPI / scan: Follow priorities of IDs when matching scan handlers

The IDs of ACPI device nodes stored in their pnp.ids member arrays
are sorted by decreasing priority (i.e. the highest-priority ID is
the first entry).  This means that when matching scan handlers to
device nodes, the namespace scanning code should walk the list of
scan handlers for each device node ID instead of walking the list
of device node IDs for each handler (the latter causes the first
handler matching any of the device node IDs to be chosen, although
there may be another handler matching an ID of a higher priority
which should be preferred).  Make the code follow this observation.

This change has been suggested and justified by Toshi Kani.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Toshi Kani <toshi.kani@hp.com>
8 years agoACPI / PCI: pci_slot: replace printk(KERN_xxx) with pr_xxx()
Jiang Liu [Sun, 3 Feb 2013 13:55:45 +0000 (14:55 +0100)]
ACPI / PCI: pci_slot: replace printk(KERN_xxx) with pr_xxx()

Trivial changes to replace printk(KERN_xxx) with pr_xxx().

Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
8 years agocpufreq / intel_pstate: Fix 32 bit build
Dirk Brandewie [Mon, 11 Feb 2013 19:33:34 +0000 (20:33 +0100)]
cpufreq / intel_pstate: Fix 32 bit build

Fixes 32 bit build.

on i386:
drivers/built-in.o: In function `intel_pstate_timer_func':
intel_pstate.c:(.text+0x4ce97e): undefined reference to `__udivdi3'
drivers/built-in.o: In function `intel_pstate_cpu_init':
intel_pstate.c:(.cpuinit.text+0x974): undefined reference to `__udivdi3'

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
8 years agoMerge branch 'pnp'
Rafael J. Wysocki [Mon, 11 Feb 2013 12:31:35 +0000 (13:31 +0100)]
Merge branch 'pnp'

* pnp:
  PNPACPI: Fix acpi_bus_get_device() check in drivers/pnp/pnpacpi/core.c
  drivers/pnp/pnpbios: remove depends on CONFIG_EXPERIMENTAL

8 years agoMerge branch 'acpi-lpss'
Rafael J. Wysocki [Mon, 11 Feb 2013 12:21:27 +0000 (13:21 +0100)]
Merge branch 'acpi-lpss'

* acpi-lpss:
  ACPI / platform: create LPSS clocks if Lynxpoint devices are found during scan
  clk: x86: add support for Lynxpoint LPSS clocks
  x86: add support for Intel Low Power Subsystem
  ACPI / platform: fix comment about the platform device name
  ACPI: add support for CSRT table

8 years agoMerge branch 'acpi-pm'
Rafael J. Wysocki [Mon, 11 Feb 2013 12:20:56 +0000 (13:20 +0100)]
Merge branch 'acpi-pm'

* acpi-pm: (35 commits)
  ACPI / PM: Handle missing _PSC in acpi_bus_update_power()
  ACPI / PM: Do not power manage devices in unknown initial states
  ACPI / PM: Fix acpi_bus_get_device() check in drivers/acpi/device_pm.c
  ACPI / PM: Fix /proc/acpi/wakeup for devices w/o bus or parent
  ACPI / PM: Fix consistency check for power resources during resume
  ACPI / PM: Expose lists of device power resources to user space
  sysfs: Functions for adding/removing symlinks to/from attribute groups
  ACPI / PM: Expose current status of ACPI power resources
  ACPI / PM: Expose power states of ACPI devices to user space
  ACPI / scan: Prevent device add uevents from racing with user space
  ACPI / PM: Fix device power state value after transitions to D3cold
  ACPI / PM: Use string "D3cold" to represent ACPI_STATE_D3_COLD
  ACPI / PM: Sanitize checks in acpi_power_on_resources()
  ACPI / PM: Always evaluate _PSn after setting power resources
  ACPI / PM: Introduce helper for executing _PSn methods
  ACPI / PM: Make acpi_bus_init_power() more robust
  ACPI / PM: Fix build for unusual combination of Kconfig options
  ACPI / PM: remove leading whitespace from #ifdef
  ACPI / PM: Consolidate suspend-specific and hibernate-specific code
  ACPI / PM: Move device power management functions to device_pm.c
  ...

8 years agoMerge branch 'acpica'
Rafael J. Wysocki [Mon, 11 Feb 2013 12:20:33 +0000 (13:20 +0100)]
Merge branch 'acpica'

* acpica: (56 commits)
  ACPICA: Update version to 20130117
  ACPICA: Update predefined info table for _MLS method
  ACPICA: Remove some extraneous newlines in ACPI_ERROR type calls
  ACPICA: iASL/Disassembler: Add option to ignore NOOP opcodes/operators
  ACPICA: AcpiGetSleepTypeData: Allow \_Sx to return either 1 or 2 integers
  ACPICA: Update ACPICA copyrights to 2013
  ACPICA: Update predefined info table
  ACPICA: Cleanup table handler naming conflicts.
  ACPICA: Source restructuring: split large files into 8 new files.
  ACPICA: Cleanup PM_TIMER_FREQUENCY definition.
  ACPICA: Cleanup ACPI_DEBUG_PRINT macros to fix potential build breakages.
  ACPICA: Update version to 20121220.
  ACPICA: Interpreter: Fix Store() when implicit conversion is not possible.
  ACPICA: Resources: Split interrupt share/wake bits into two fields.
  ACPICA: Resources: Support for ACPI 5 wake bit in ExtendedInterrupt descriptor.
  ACPICA: Interpreter: Add warning if 64-bit constant appears in 32-bit table.
  ACPICA: Update ACPICA initialization messages.
  ACPICA: Namespace: Eliminate dot...dot output during initialization.
  ACPICA: Resource manager: Add support for ACPI 5 wake bit in IRQ descriptor.
  ACPICA: Fix possible memory leak in dispatcher error path.
  ...

8 years agoMerge branch 'acpi-scan'
Rafael J. Wysocki [Mon, 11 Feb 2013 12:20:02 +0000 (13:20 +0100)]
Merge branch 'acpi-scan'

* acpi-scan: (30 commits)
  ACPI / scan: Fix acpi_bus_get_device() check in acpi_match_device()
  ACPI / scan: Make namespace scanning and trimming mutually exclusive
  ACPI / scan: Make it clear that acpi_bus_trim() cannot fail
  ACPI / scan: Drop acpi_bus_add() and use acpi_bus_scan() instead
  ACPI: update ej_event interface to take acpi_device
  ACPI / scan: Add second pass to acpi_bus_trim()
  ACPI / scan: Change the implementation of acpi_bus_trim()
  ACPI / scan: Drop the second argument of acpi_bus_trim()
  ACPI / scan: Drop the second argument of acpi_device_unregister()
  ACPI: Remove the ops field from struct acpi_device
  ACPI: remove unused acpi_op_bind and acpi_op_unbind
  ACPI / scan: Fix check of device_attach() return value.
  ACPI / scan: Treat power resources in a special way
  ACPI: Remove unused struct acpi_pci_root.id member
  ACPI: Drop ACPI device .bind() and .unbind() callbacks
  ACPI / PCI: Move the _PRT setup and cleanup code to pci-acpi.c
  ACPI / PCI: Rework the setup and cleanup of device wakeup
  ACPI: Add .setup() and .cleanup() callbacks to struct acpi_bus_type
  ACPI: Make acpi_bus_scan() and acpi_bus_add() take only one argument
  ACPI: Replace ACPI device add_type field with a match_driver flag
  ...

8 years agosuspend: enable freeze timeout configuration through sys
Li Fei [Fri, 1 Feb 2013 08:56:03 +0000 (08:56 +0000)]
suspend: enable freeze timeout configuration through sys

At present, the value of timeout for freezing is 20s, which is
meaningless in case that one thread is frozen with mutex locked
and another thread is trying to lock the mutex, as this time of
freezing will fail unavoidably.
And if there is no new wakeup event registered, the system will
waste at most 20s for such meaningless trying of freezing.

With this patch, the value of timeout can be configured to smaller
value, so such meaningless trying of freezing will be aborted in
earlier time, and later freezing can be also triggered in earlier
time. And more power will be saved.
In normal case on mobile phone, it costs real little time to freeze
processes. On some platform, it only costs about 20ms to freeze
user space processes and 10ms to freeze kernel freezable threads.

Signed-off-by: Liu Chuansheng <chuansheng.liu@intel.com>
Signed-off-by: Li Fei <fei.li@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
8 years agoACPI: enable ACPI SCI during suspend
Zhang Rui [Mon, 4 Feb 2013 07:10:10 +0000 (07:10 +0000)]
ACPI: enable ACPI SCI during suspend

Enable ACPI SCI during suspend so that SCI can be used
as wake events for PM_SUSPEND_FREEZE.

For S3/S4 transition,
We disable all GPEs in suspend_ops->prepare_late() to
fix a problem that GPEs may trigger SCI  before
arch_suspend_disable_irqs() is run.
So it is safe to leave the SCI enabled until
arch_suspend_irq_disable() is run.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
8 years agoPM: Introduce suspend state PM_SUSPEND_FREEZE
Zhang Rui [Wed, 6 Feb 2013 12:00:36 +0000 (13:00 +0100)]
PM: Introduce suspend state PM_SUSPEND_FREEZE

PM_SUSPEND_FREEZE state is a general state that
does not need any platform specific support, it equals
frozen processes + suspended devices + idle processors.

Compared with PM_SUSPEND_MEMORY,
PM_SUSPEND_FREEZE saves less power
because the system is still in a running state.
PM_SUSPEND_FREEZE has less resume latency because it does not
touch BIOS, and the processors are in idle state.

Compared with RTPM/idle,
PM_SUSPEND_FREEZE saves more power as
1. the processor has longer sleep time because processes are frozen.
   The deeper c-state the processor supports, more power saving we can get.
2. PM_SUSPEND_FREEZE uses system suspend code path, thus we can get
   more power saving from the devices that does not have good RTPM support.

This state is useful for
1) platforms that do not have STR, or have a broken STR.
2) platforms that have an extremely low power idle state,
   which can be used to replace STR.

The following describes how PM_SUSPEND_FREEZE state works.
1. echo freeze > /sys/power/state
2. the processes are frozen.
3. all the devices are suspended.
4. all the processors are blocked by a wait queue
5. all the processors idles and enters (Deep) c-state.
6. an interrupt fires.
7. a processor is woken up and handles the irq.
8. if it is a general event,
   a) the irq handler runs and quites.
   b) goto step 4.
9. if it is a real wake event, say, power button pressing, keyboard touch, mouse moving,
   a) the irq handler runs and activate the wakeup source
   b) wakeup_source_activate() notifies the wait queue.
   c) system starts resuming from PM_SUSPEND_FREEZE
10. all the devices are resumed.
11. all the processes are unfrozen.
12. system is back to working.

Known Issue:
The wakeup of this new PM_SUSPEND_FREEZE state may behave differently
from the previous suspend state.
Take ACPI platform for example, there are some GPEs that only enabled
when the system is in sleep state, to wake the system backk from S3/S4.
But we are not touching these GPEs during transition to PM_SUSPEND_FREEZE.
This means we may lose some wake event.
But on the other hand, as we do not disable all the Interrupts during
PM_SUSPEND_FREEZE, we may get some extra "wakeup" Interrupts, that are
not available for S3/S4.

The patches has been tested on an old Sony laptop, and here are the results:

Average Power:
1. RPTM/idle for half an hour:
   14.8W, 12.6W, 14.1W, 12.5W, 14.4W, 13.2W, 12.9W
2. Freeze for half an hour:
   11W, 10.4W, 9.4W, 11.3W 10.5W
3. RTPM/idle for three hours:
   11.6W
4. Freeze for three hours:
   10W
5. Suspend to Memory:
   0.5~0.9W

Average Resume Latency:
1. RTPM/idle with a black screen: (From pressing keyboard to screen back)
   Less than 0.2s
2. Freeze: (From pressing power button to screen back)
   2.50s
3. Suspend to Memory: (From pressing power button to screen back)
   4.33s

>From the results, we can see that all the platforms should benefit from
this patch, even if it does not have Low Power S0.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
8 years agocpufreq: conservative: Fix typos in comments
Stratos Karafotis [Fri, 8 Feb 2013 17:24:24 +0000 (17:24 +0000)]
cpufreq: conservative: Fix typos in comments

Fix a couple of typos in comments.

Signed-off-by: Stratos Karafotis <stratosk@semaphore.gr>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
8 years agocpufreq: ondemand: Fix typos in comments
Stratos Karafotis [Fri, 8 Feb 2013 17:24:18 +0000 (17:24 +0000)]
cpufreq: ondemand: Fix typos in comments

Fix some typos in comments.

Signed-off-by: Stratos Karafotis <stratosk@semaphore.gr>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
8 years agocpufreq: exynos: simplify .init() for setting policy->cpus
Viresh Kumar [Thu, 31 Jan 2013 02:26:04 +0000 (07:56 +0530)]
cpufreq: exynos: simplify .init() for setting policy->cpus

With the recent changes in cpufreq core, we just need to set mask of all
possible cpus into policy->cpus. Rest would be done by core.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
8 years agocpufreq: kirkwood: Add a cpufreq driver for Marvell Kirkwood SoCs
Andrew Lunn [Tue, 5 Feb 2013 21:52:51 +0000 (22:52 +0100)]
cpufreq: kirkwood: Add a cpufreq driver for Marvell Kirkwood SoCs

The Marvell Kirkwood SoCs have simple cpufreq support in hardware. The
CPU can either use the a high speed cpu clock, or the slower DDR
clock. Add a driver to swap between these two clock sources.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
8 years agocpufreq/x86: Add P-state driver for sandy bridge.
Dirk Brandewie [Wed, 6 Feb 2013 17:02:13 +0000 (09:02 -0800)]
cpufreq/x86: Add P-state driver for sandy bridge.

Add a P-state driver for the Intel Sandy bridge processor. In cpufreq
terminology this driver implements a  scaling driver with an internal
governor.

When built into the the kernel this driver will be the preferred
scaling driver for Sandy bridge processors.

In addition to the interfaces provided by the cpufreq subsystem for
controlling scaling drivers. The user may control the behavior of the
driver via three sysfs files located in
"/sys/devices/system/cpu/intel_pstate".

  max_perf_pct: limits the maximum P state that will be requested by
  the driver stated as a percentage of the avail performance.

  min_perf_pct: limits the minimum P state that will be  requested by
  the driver stated as a percentage of the avail performance.

  no_turbo: limits the driver to selecting P states below the turbo
  frequency range.

Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
8 years agocpufreq_stats: do not remove sysfs files if frequency table is not present
Dirk Brandewie [Wed, 6 Feb 2013 17:02:12 +0000 (09:02 -0800)]
cpufreq_stats: do not remove sysfs files if frequency table is not present

The sysfs files for cpufreq_stats are created in cpufreq_stats_create_table()
called from cpufreq_stat_notifier_policy() when a policy is added to
the cpu. cpufreq_stats_create_table() will not be called if the
scaling driver does not export a frequency table to cpufreq.  Use the
same fence on tear down.

Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
8 years agocpufreq: Do not track governor name for scaling drivers with internal governors.
Dirk Brandewie [Wed, 6 Feb 2013 17:02:11 +0000 (09:02 -0800)]
cpufreq: Do not track governor name for scaling drivers with internal governors.

Scaling drivers that implement internal governors do not have governor
structures assocaited with them.  Only track the name of the governor
associated with the CPU if the driver does not implement
cpufreq_driver.setpolicy()

Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
8 years agocpufreq: Only call cpufreq_out_of_sync() for driver that implement cpufreq_driver...
Dirk Brandewie [Wed, 6 Feb 2013 17:02:09 +0000 (09:02 -0800)]
cpufreq: Only call cpufreq_out_of_sync() for driver that implement cpufreq_driver.target()

Scaling drivers that implement cpufreq_driver.setpolicy() have
internal governors that do not signal changes via
cpufreq_notify_transition() so the frequncy in the policy will almost
certainly be different than the current frequncy.  Only call
cpufreq_out_of_sync() when the underlying driver implements
cpufreq_driver.target()

Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
8 years agocpufreq: Retrieve current frequency from scaling drivers with internal governors
Dirk Brandewie [Wed, 6 Feb 2013 17:02:08 +0000 (09:02 -0800)]
cpufreq: Retrieve current frequency from scaling drivers with internal governors

Scaling drivers that implement the cpufreq_driver.setpolicy() versus
the cpufreq_driver.target() interface do not set policy->cur.

Normally policy->cur is set during the call to cpufreq_driver.target()
when the frequnecy request is made by the governor.

If the scaling driver implements cpufreq_driver.setpolicy() and
cpufreq_driver.get() interfaces use cpufreq_driver.get() to retrieve
the current frequency.

Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
8 years agocpufreq: Fix locking issues
Viresh Kumar [Thu, 7 Feb 2013 05:25:00 +0000 (10:55 +0530)]
cpufreq: Fix locking issues

cpufreq core uses two locks:
- cpufreq_driver_lock: General lock for driver and cpufreq_cpu_data array.
- cpu_policy_rwsemfix locking: per CPU reader-writer semaphore designed to cure
  all cpufreq/hotplug/workqueue/etc related lock issues.

These locks were not used properly and are placed against their principle
(present before their definition) at various places. This patch is an attempt to
fix their use.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
8 years agocpufreq: Create a macro for unlock_policy_rwsem{read,write}
Viresh Kumar [Thu, 7 Feb 2013 10:08:42 +0000 (15:38 +0530)]
cpufreq: Create a macro for unlock_policy_rwsem{read,write}

On the lines of macro: lock_policy_rwsem, we can create another macro for
unlock_policy_rwsem. Lets do it.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
8 years agocpufreq: Remove unused HOTPLUG_CPU code
Viresh Kumar [Thu, 7 Feb 2013 05:26:03 +0000 (10:56 +0530)]
cpufreq: Remove unused HOTPLUG_CPU code

Because the sibling cpu of any online cpu is identified very early in
cpufreq_add_dev(), below code is never executed. And so can be removed.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
8 years agocpufreq: governors: Fix WARN_ON() for multi-policy platforms
Viresh Kumar [Thu, 7 Feb 2013 07:21:27 +0000 (12:51 +0530)]
cpufreq: governors: Fix WARN_ON() for multi-policy platforms

On multi-policy systems there is a single instance of governor for both the
policies (if same governor is chosen for both policies). With the code update
from following patches:

8eeed09 cpufreq: governors: Get rid of dbs_data->enable field
b394058 cpufreq: governors: Reset tunables only for cpufreq_unregister_governor()

We are creating/removing sysfs directory of governor for for every call to
GOV_START and STOP. This would fail for multi-policy system as there is a
per-policy call to START/STOP.

This patch reuses the governor->initialized variable to detect total users of
governor.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
8 years agocpufreq: ondemand: Replace down_differential tuner with adj_up_threshold
Stratos Karafotis [Wed, 6 Feb 2013 12:34:00 +0000 (13:34 +0100)]
cpufreq: ondemand: Replace down_differential tuner with adj_up_threshold

In order to avoid the calculation of up_threshold - down_differential
every time that the frequency must be decreased, we replace the
down_differential tuner with the adj_up_threshold which keeps the
difference across multiple checks.

Update the adj_up_threshold only when the up_theshold is also updated.

Signed-off-by: Stratos Karafotis <stratosk@semaphore.gr>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
8 years agocpufreq / stats: Get rid of CPUFREQ_STATDEVICE_ATTR
Viresh Kumar [Mon, 4 Feb 2013 11:38:52 +0000 (11:38 +0000)]
cpufreq / stats: Get rid of CPUFREQ_STATDEVICE_ATTR

Macro "CPUFREQ_STATDEVICE_ATTR" is defined local to cpufreq_stats.c file and is
almost a copy of the generic version present in cpufreq.h file. Lets use the
generic version instead.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
8 years agocpufreq: Don't check cpu_online(policy->cpu)
Viresh Kumar [Mon, 4 Feb 2013 11:38:51 +0000 (11:38 +0000)]
cpufreq: Don't check cpu_online(policy->cpu)

policy->cpu or cpus in policy->cpus can't be offline anymore. And so we don't
need to check if they are online or not.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
8 years agocpufreq: add imx6q-cpufreq driver
Shawn Guo [Mon, 4 Feb 2013 05:46:29 +0000 (05:46 +0000)]
cpufreq: add imx6q-cpufreq driver

Add an imx6q-cpufreq driver for Freescale i.MX6Q SoC to handle the
hardware specific frequency and voltage scaling requirements.

The driver supports module build and is instantiated by the platform
device/driver mechanism, so that it will not be instantiated on other
platforms, as IMX is built with multiplatform support.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
8 years agoLinux 3.8-rc7
Linus Torvalds [Fri, 8 Feb 2013 21:20:39 +0000 (08:20 +1100)]
Linux 3.8-rc7

8 years agoMerge branch 'fixes' of git://git.linaro.org/people/rmk/linux-arm
Linus Torvalds [Fri, 8 Feb 2013 21:01:18 +0000 (08:01 +1100)]
Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-arm

Pull ARM fixes from Russell King:
 "I was going to hold these off until v3.8 was out, and send them with a
  stable tag, but as everyone else is pushing much bigger fixes which
  Linus is accepting, let's save people from the hastle of having to
  patch v3.8 back into working or use a stable kernel.

  Looking at the diffstat, this really is high value for its size; this
  is miniscule compared to how the -rc6 to tip diffstat currently looks.

  So, four patches in this set:
   - Punit Agrawal reports that the kernel no longer boots on MPCore due
     to a new assumption made in the GIC code which isn't true of
     earlier GIC designs.  This is the biggest change in this set.
   - Punit's boot log also revealed a bunch of WARN_ON() dumps caused by
     the DT-ification of the GIC support without fixing up non-DT
     Realview - which now sees a greater number of interrupts than it
     did before.
   - A fix for the DMA coherent code from Marek which uses the wrong
     check for atomic allocations; this can result in spinlock lockups
     or other nasty effects.
   - A fix from Will, which will affect all Android based platforms if
     not applied (which use the 2G:2G VM split) - this causes
     particularly 'make' to misbehave unless this bug is fixed."

* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
  ARM: 7641/1: memory: fix broken mmap by ensuring TASK_UNMAPPED_BASE is aligned
  ARM: DMA mapping: fix bad atomic test
  ARM: realview: ensure that we have sufficient IRQs available
  ARM: GIC: fix GIC cpumask initialization

8 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Linus Torvalds [Fri, 8 Feb 2013 20:55:24 +0000 (07:55 +1100)]
Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:

 1) Revert iwlwifi reclaimed packet tracking, it causes problems for a
    bunch of folks.  From Emmanuel Grumbach.

 2) Work limiting code in brcmsmac wifi driver can clear tx status
    without processing the event.  From Arend van Spriel.

 3) rtlwifi USB driver processes wrong SKB, fix from Larry Finger.

 4) l2tp tunnel delete can race with close, fix from Tom Parkin.

 5) pktgen_add_device() failures are not checked at all, fix from Cong
    Wang.

 6) Fix unintentional removal of carrier off from tun_detach(),
    otherwise we confuse userspace, from Michael S.  Tsirkin.

 7) Don't leak socket reference counts and ubufs in vhost-net driver,
    from Jason Wang.

 8) vmxnet3 driver gets it's initial carrier state wrong, fix from Neil
    Horman.

 9) Protect against USB networking devices which spam the host with 0
    length frames, from Bjørn Mork.

10) Prevent neighbour overflows in ipv6 for locally destined routes,
    from Marcelo Ricardo.  This is the best short-term fix for this, a
    longer term fix has been implemented in net-next.

11) L2TP uses ipv4 datagram routines in it's ipv6 code, whoops.  This
    mistake is largely because the ipv6 functions don't even have some
    kind of prefix in their names to suggest they are ipv6 specific.
    From Tom Parkin.

12) Check SYN packet drops properly in tcp_rcv_fastopen_synack(), from
    Yuchung Cheng.

13) Fix races and TX skb freeing bugs in via-rhine's NAPI support, from
    Francois Romieu and your's truly.

14) Fix infinite loops and divides by zero in TCP congestion window
    handling, from Eric Dumazet, Neal Cardwell, and Ilpo Järvinen.

15) AF_PACKET tx ring handling can leak kernel memory to userspace, fix
    from Phil Sutter.

16) Fix error handling in ipv6 GRE tunnel transmit, from Tommi Rantala.

17) Protect XEN netback driver against hostile frontend putting garbage
    into the rings, don't leak pages in TX GOP checking, and add proper
    resource releasing in error path of xen_netbk_get_requests().  From
    Ian Campbell.

18) SCTP authentication keys should be cleared out and released with
    kzfree(), from Daniel Borkmann.

19) L2TP is a bit too clever trying to maintain skb->truesize, and ends
    up corrupting socket memory accounting to the point where packet
    sending is halted indefinitely.  Just remove the adjustments
    entirely, they aren't really needed.  From Eric Dumazet.

20) ATM Iphase driver uses a data type with the same name as the S390
    headers, rename to fix the build.  From Heiko Carstens.

21) Fix a typo in copying the inner network header offset from one SKB
    to another, from Pravin B Shelar.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (56 commits)
  net: sctp: sctp_endpoint_free: zero out secret key data
  net: sctp: sctp_setsockopt_auth_key: use kzfree instead of kfree
  atm/iphase: rename fregt_t -> ffreg_t
  net: usb: fix regression from FLAG_NOARP code
  l2tp: dont play with skb->truesize
  net: sctp: sctp_auth_key_put: use kzfree instead of kfree
  netback: correct netbk_tx_err to handle wrap around.
  xen/netback: free already allocated memory on failure in xen_netbk_get_requests
  xen/netback: don't leak pages on failure in xen_netbk_tx_check_gop.
  xen/netback: shutdown the ring if it contains garbage.
  net: qmi_wwan: add more Huawei devices, including E320
  net: cdc_ncm: add another Huawei vendor specific device
  ipv6/ip6_gre: fix error case handling in ip6gre_tunnel_xmit()
  tcp: fix for zero packets_in_flight was too broad
  brcmsmac: rework of mac80211 .flush() callback operation
  ssb: unregister gpios before unloading ssb
  bcma: unregister gpios before unloading bcma
  rtlwifi: Fix scheduling while atomic bug
  net: usbnet: fix tx_dropped statistics
  tcp: ipv6: Update MIB counters for drops
  ...

8 years agoMerge branch 'sctp_keys'
David S. Miller [Fri, 8 Feb 2013 19:55:08 +0000 (14:55 -0500)]
Merge branch 'sctp_keys'

Daniel Borkmann says:

====================
Cryptographically used keys should be zeroed out when our session
ends resp. memory is freed, thus do not leave them somewhere in the
memory.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agonet: sctp: sctp_endpoint_free: zero out secret key data
Daniel Borkmann [Fri, 8 Feb 2013 03:04:35 +0000 (03:04 +0000)]
net: sctp: sctp_endpoint_free: zero out secret key data

On sctp_endpoint_destroy, previously used sensitive keying material
should be zeroed out before the memory is returned, as we already do
with e.g. auth keys when released.

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agonet: sctp: sctp_setsockopt_auth_key: use kzfree instead of kfree
Daniel Borkmann [Fri, 8 Feb 2013 03:04:34 +0000 (03:04 +0000)]
net: sctp: sctp_setsockopt_auth_key: use kzfree instead of kfree

In sctp_setsockopt_auth_key, we create a temporary copy of the user
passed shared auth key for the endpoint or association and after
internal setup, we free it right away. Since it's sensitive data, we
should zero out the key before returning the memory back to the
allocator. Thus, use kzfree instead of kfree, just as we do in
sctp_auth_key_put().

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agoatm/iphase: rename fregt_t -> ffreg_t
Heiko Carstens [Fri, 8 Feb 2013 00:19:11 +0000 (00:19 +0000)]
atm/iphase: rename fregt_t -> ffreg_t

We have conflicting type qualifiers for "freg_t" in s390's ptrace.h and the
iphase atm device driver, which causes the compile error below.
Unfortunately the s390 typedef can't be renamed, since it's a user visible api,
nor can I change the include order in s390 code to avoid the conflict.

So simply rename the iphase typedef to a new name. Fixes this compile error:

In file included from drivers/atm/iphase.c:66:0:
drivers/atm/iphase.h:639:25: error: conflicting type qualifiers for 'freg_t'
In file included from next/arch/s390/include/asm/ptrace.h:9:0,
                 from next/arch/s390/include/asm/lowcore.h:12,
                 from next/arch/s390/include/asm/thread_info.h:30,
                 from include/linux/thread_info.h:54,
                 from include/linux/preempt.h:9,
                 from include/linux/spinlock.h:50,
                 from include/linux/seqlock.h:29,
                 from include/linux/time.h:5,
                 from include/linux/stat.h:18,
                 from include/linux/module.h:10,
                 from drivers/atm/iphase.c:43:
next/arch/s390/include/uapi/asm/ptrace.h:197:3: note: previous declaration of 'freg_t' was here

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: chas williams - CONTRACTOR <chas@cmf.nrl.navy.mil>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agoARM: 7641/1: memory: fix broken mmap by ensuring TASK_UNMAPPED_BASE is aligned
Will Deacon [Fri, 8 Feb 2013 11:52:29 +0000 (12:52 +0100)]
ARM: 7641/1: memory: fix broken mmap by ensuring TASK_UNMAPPED_BASE is aligned

We have received multiple reports of mmap failures when running with a
2:2 vm split. These manifest as either -EINVAL with a non page-aligned
address (ending 0xaaa) or a SEGV, depending on the application. The
issue is commonly observed in children of make, which appears to use
bottom-up mmap (assumedly because it changes the stack rlimit).

Further investigation reveals that this regression was triggered by
394ef6403abc ("mm: use vm_unmapped_area() on arm architecture"), whereby
TASK_UNMAPPED_BASE is no longer page-aligned for bottom-up mmap, causing
get_unmapped_area to choke on misaligned addressed.

This patch fixes the problem by defining TASK_UNMAPPED_BASE in terms of
TASK_SIZE and explicitly aligns the result to 16M, matching the other
end of the heap.

Acked-by: Nicolas Pitre <nico@linaro.org>
Reported-by: Steve Capper <steve.capper@arm.com>
Reported-by: Jean-Francois Moine <moinejf@free.fr>
Reported-by: Christoffer Dall <cdall@cs.columbia.edu>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
8 years agoARM: DMA mapping: fix bad atomic test
Russell King [Wed, 30 Jan 2013 23:55:35 +0000 (23:55 +0000)]
ARM: DMA mapping: fix bad atomic test

Realview fails to boot with this warning:
BUG: spinlock lockup suspected on CPU#0, init/1
 lock: 0xcf8bde10, .magic: dead4ead, .owner: init/1, .owner_cpu: 0
Backtrace:
[<c00185d8>] (dump_backtrace+0x0/0x10c) from [<c03294e8>] (dump_stack+0x18/0x1c) r6:cf8bde10 r5:cf83d1c0 r4:cf8bde10 r3:cf83d1c0
[<c03294d0>] (dump_stack+0x0/0x1c) from [<c018926c>] (spin_dump+0x84/0x98)
[<c01891e8>] (spin_dump+0x0/0x98) from [<c0189460>] (do_raw_spin_lock+0x100/0x198)
[<c0189360>] (do_raw_spin_lock+0x0/0x198) from [<c032cbac>] (_raw_spin_lock+0x3c/0x44)
[<c032cb70>] (_raw_spin_lock+0x0/0x44) from [<c01c9224>] (pl011_console_write+0xe8/0x11c)
[<c01c913c>] (pl011_console_write+0x0/0x11c) from [<c002aea8>] (call_console_drivers.clone.7+0xdc/0x104)
[<c002adcc>] (call_console_drivers.clone.7+0x0/0x104) from [<c002b320>] (console_unlock+0x2e8/0x454)
[<c002b038>] (console_unlock+0x0/0x454) from [<c002b8b4>] (vprintk_emit+0x2d8/0x594)
[<c002b5dc>] (vprintk_emit+0x0/0x594) from [<c0329718>] (printk+0x3c/0x44)
[<c03296dc>] (printk+0x0/0x44) from [<c002929c>] (warn_slowpath_common+0x28/0x6c)
[<c0029274>] (warn_slowpath_common+0x0/0x6c) from [<c0029304>] (warn_slowpath_null+0x24/0x2c)
[<c00292e0>] (warn_slowpath_null+0x0/0x2c) from [<c0070ab0>] (lockdep_trace_alloc+0xd8/0xf0)
[<c00709d8>] (lockdep_trace_alloc+0x0/0xf0) from [<c00c0850>] (kmem_cache_alloc+0x24/0x11c)
[<c00c082c>] (kmem_cache_alloc+0x0/0x11c) from [<c00bb044>] (__get_vm_area_node.clone.24+0x7c/0x16c)
[<c00bafc8>] (__get_vm_area_node.clone.24+0x0/0x16c) from [<c00bb7b8>] (get_vm_area_caller+0x48/0x54)
[<c00bb770>] (get_vm_area_caller+0x0/0x54) from [<c0020064>] (__alloc_remap_buffer.clone.15+0x38/0xb8)
[<c002002c>] (__alloc_remap_buffer.clone.15+0x0/0xb8) from [<c0020244>] (__dma_alloc+0x160/0x2c8)
[<c00200e4>] (__dma_alloc+0x0/0x2c8) from [<c00204d8>] (arm_dma_alloc+0x88/0xa0)[<c0020450>] (arm_dma_alloc+0x0/0xa0) from [<c00beb00>] (dma_pool_alloc+0xcc/0x1a8)
[<c00bea34>] (dma_pool_alloc+0x0/0x1a8) from [<c01a9d14>] (pl08x_fill_llis_for_desc+0x28/0x568)
[<c01a9cec>] (pl08x_fill_llis_for_desc+0x0/0x568) from [<c01aab8c>] (pl08x_prep_slave_sg+0x258/0x3b0)
[<c01aa934>] (pl08x_prep_slave_sg+0x0/0x3b0) from [<c01c9f74>] (pl011_dma_tx_refill+0x140/0x288)
[<c01c9e34>] (pl011_dma_tx_refill+0x0/0x288) from [<c01ca748>] (pl011_start_tx+0xe4/0x120)
[<c01ca664>] (pl011_start_tx+0x0/0x120) from [<c01c54a4>] (__uart_start+0x48/0x4c)
[<c01c545c>] (__uart_start+0x0/0x4c) from [<c01c632c>] (uart_start+0x2c/0x3c)
[<c01c6300>] (uart_start+0x0/0x3c) from [<c01c795c>] (uart_write+0xcc/0xf4)
[<c01c7890>] (uart_write+0x0/0xf4) from [<c01b0384>] (n_tty_write+0x1c0/0x3e4)
[<c01b01c4>] (n_tty_write+0x0/0x3e4) from [<c01acfe8>] (tty_write+0x144/0x240)
[<c01acea4>] (tty_write+0x0/0x240) from [<c01ad17c>] (redirected_tty_write+0x98/0xac)
[<c01ad0e4>] (redirected_tty_write+0x0/0xac) from [<c00c371c>] (vfs_write+0xbc/0x150)
[<c00c3660>] (vfs_write+0x0/0x150) from [<c00c39c0>] (sys_write+0x4c/0x78)
[<c00c3974>] (sys_write+0x0/0x78) from [<c0014460>] (ret_fast_syscall+0x0/0x3c)

This happens because the DMA allocation code is not respecting atomic
allocations correctly.

GFP flags should not be tested for GFP_ATOMIC to determine if an
atomic allocation is being requested.  GFP_ATOMIC is not a flag but
a value.  The GFP bitmask flags are all prefixed with __GFP_.

The rest of the kernel tests for __GFP_WAIT not being set to indicate
an atomic allocation.  We need to do the same.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
8 years agoARM: realview: ensure that we have sufficient IRQs available
Russell King [Wed, 30 Jan 2013 23:54:26 +0000 (23:54 +0000)]
ARM: realview: ensure that we have sufficient IRQs available

Realview EB with a rev B MPcore tile results in lots of warnings at
boot because it can't allocate enough IRQs.  Fix this by increasing
the number of available IRQs.

WARNING: at /home/rmk/git/linux-rmk/arch/arm/common/gic.c:757 gic_init_bases+0x12c/0x2ec()
Cannot allocate irq_descs @ IRQ96, assuming pre-allocated
Modules linked in:
Backtrace:
[<c00185d8>] (dump_backtrace+0x0/0x10c) from [<c03294e8>] (dump_stack+0x18/0x1c) r6:000002f5 r5:c042c62c r4:c044ff40 r3:c045f240
[<c03294d0>] (dump_stack+0x0/0x1c) from [<c00292c8>] (warn_slowpath_common+0x54/0x6c)
[<c0029274>] (warn_slowpath_common+0x0/0x6c) from [<c0029384>] (warn_slowpath_fmt+0x38/0x40)
[<c002934c>] (warn_slowpath_fmt+0x0/0x40) from [<c042c62c>] (gic_init_bases+0x12c/0x2ec)
[<c042c500>] (gic_init_bases+0x0/0x2ec) from [<c042cdc8>] (gic_init_irq+0x8c/0xd8)
[<c042cd3c>] (gic_init_irq+0x0/0xd8) from [<c042827c>] (init_IRQ+0x1c/0x24)
[<c0428260>] (init_IRQ+0x0/0x24) from [<c04256c8>] (start_kernel+0x1a4/0x300)
[<c0425524>] (start_kernel+0x0/0x300) from [<70008070>] (0x70008070)
---[ end trace 1b75b31a2719ed1c ]---
------------[ cut here ]------------
WARNING: at /home/rmk/git/linux-rmk/kernel/irq/irqdomain.c:234 irq_domain_add_legacy+0x80/0x140()
Modules linked in:
Backtrace:
[<c00185d8>] (dump_backtrace+0x0/0x10c) from [<c03294e8>] (dump_stack+0x18/0x1c) r6:000000ea r5:c0081a38 r4:00000000 r3:c045f240
[<c03294d0>] (dump_stack+0x0/0x1c) from [<c00292c8>] (warn_slowpath_common+0x54/0x6c)
[<c0029274>] (warn_slowpath_common+0x0/0x6c) from [<c0029304>] (warn_slowpath_null+0x24/0x2c)
[<c00292e0>] (warn_slowpath_null+0x0/0x2c) from [<c0081a38>] (irq_domain_add_legacy+0x80/0x140)
[<c00819b8>] (irq_domain_add_legacy+0x0/0x140) from [<c042c64c>] (gic_init_bases+0x14c/0x2ec)
[<c042c500>] (gic_init_bases+0x0/0x2ec) from [<c042cdc8>] (gic_init_irq+0x8c/0xd8)
[<c042cd3c>] (gic_init_irq+0x0/0xd8) from [<c042827c>] (init_IRQ+0x1c/0x24)
[<c0428260>] (init_IRQ+0x0/0x24) from [<c04256c8>] (start_kernel+0x1a4/0x300)
[<c0425524>] (start_kernel+0x0/0x300) from [<70008070>] (0x70008070)
---[ end trace 1b75b31a2719ed1d ]---
------------[ cut here ]------------
WARNING: at /home/rmk/git/linux-rmk/arch/arm/common/gic.c:762 gic_init_bases+0x170/0x2ec()
Modules linked in:
Backtrace:
[<c00185d8>] (dump_backtrace+0x0/0x10c) from [<c03294e8>] (dump_stack+0x18/0x1c) r6:000002fa r5:c042c670 r4:00000000 r3:c045f240
[<c03294d0>] (dump_stack+0x0/0x1c) from [<c00292c8>] (warn_slowpath_common+0x54/0x6c)
[<c0029274>] (warn_slowpath_common+0x0/0x6c) from [<c0029304>] (warn_slowpath_null+0x24/0x2c)
[<c00292e0>] (warn_slowpath_null+0x0/0x2c) from [<c042c670>] (gic_init_bases+0x170/0x2ec)
[<c042c500>] (gic_init_bases+0x0/0x2ec) from [<c042cdc8>] (gic_init_irq+0x8c/0xd8)
[<c042cd3c>] (gic_init_irq+0x0/0xd8) from [<c042827c>] (init_IRQ+0x1c/0x24)
[<c0428260>] (init_IRQ+0x0/0x24) from [<c04256c8>] (start_kernel+0x1a4/0x300)
[<c0425524>] (start_kernel+0x0/0x300) from [<70008070>] (0x70008070)
---[ end trace 1b75b31a2719ed1e ]---

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
8 years agoARM: GIC: fix GIC cpumask initialization
Russell King [Wed, 30 Jan 2013 23:49:57 +0000 (23:49 +0000)]
ARM: GIC: fix GIC cpumask initialization

Punit Agrawal reports:
> I was trying to boot 3.8-rc5 on Realview EB 11MPCore using
> realview-smp_defconfig as a starting point but the kernel failed to
> progress past the log below (config attached).
>
> Pawel suggested I try reverting 384a290283f - "ARM: gic: use a private
> mapping for CPU target interfaces" that you've authored. With this
> commit reverted the kernel boots.
>
> I am not quite sure why the commit breaks 11MPCore but Pawel (cc'd)
> might be able to shed light on that.

Some early GIC implementations return zero for the first distributor
CPU routing register.  This means we can't rely on that telling us
which CPU interface we're connected to.  We know that these platforms
implement PPIs for IRQs 29-31 - but we shouldn't assume that these
will always be populated.

So, instead, scan for a non-zero CPU routing register in the first
32 IRQs and use that as our CPU mask.

Reported-by: Punit Agrawal <punit.agrawal@arm.com>
Reviewed-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
8 years agoMerge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Linus Torvalds [Fri, 8 Feb 2013 08:46:26 +0000 (19:46 +1100)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux

Pull drm regression fix from Dave Airlie:
 "This one fixes a sleep while locked regression that was introduced
  earlier in 3.8."

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/ttm: fix fence locking in ttm_buffer_object_transfer, 2nd try

8 years agonet: usb: fix regression from FLAG_NOARP code
Lucas Stach [Thu, 7 Feb 2013 16:18:39 +0000 (16:18 +0000)]
net: usb: fix regression from FLAG_NOARP code

In commit 6509141f9c2ba74df6cc72ec35cd1865276ae3a4 ("usbnet: add new
flag FLAG_NOARP for usb net devices"), the newly added flag NOARP was
using an already defined value, which broke drivers using flag
MULTI_PACKET.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agol2tp: dont play with skb->truesize
Eric Dumazet [Thu, 7 Feb 2013 14:00:34 +0000 (14:00 +0000)]
l2tp: dont play with skb->truesize

Andrew Savchenko reported a DNS failure and we diagnosed that
some UDP sockets were unable to send more packets because their
sk_wmem_alloc was corrupted after a while (tx_queue column in
following trace)

$ cat /proc/net/udp
  sl  local_address rem_address   st tx_queue rx_queue tr tm->when retrnsmt   uid  timeout inode ref pointer drops
...
  459: 00000000:0270 00000000:0000 07 00000000:00000000 00:00000000 00000000     0        0 4507 2 ffff88003d612380 0
  466: 00000000:0277 00000000:0000 07 00000000:00000000 00:00000000 00000000     0        0 4802 2 ffff88003d613180 0
  470: 076A070A:007B 00000000:0000 07 FFFF4600:00000000 00:00000000 00000000   123        0 5552 2 ffff880039974380 0
  470: 010213AC:007B 00000000:0000 07 00000000:00000000 00:00000000 00000000     0        0 4986 2 ffff88003dbd3180 0
  470: 010013AC:007B 00000000:0000 07 00000000:00000000 00:00000000 00000000     0        0 4985 2 ffff88003dbd2e00 0
  470: 00FCA8C0:007B 00000000:0000 07 FFFFFB00:00000000 00:00000000 00000000     0        0 4984 2 ffff88003dbd2a80 0
...

Playing with skb->truesize is tricky, especially when
skb is attached to a socket, as we can fool memory charging.

Just remove this code, its not worth trying to be ultra
precise in xmit path.

Reported-by: Andrew Savchenko <bircoph@gmail.com>
Tested-by: Andrew Savchenko <bircoph@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agonet: sctp: sctp_auth_key_put: use kzfree instead of kfree
Daniel Borkmann [Thu, 7 Feb 2013 00:55:37 +0000 (00:55 +0000)]
net: sctp: sctp_auth_key_put: use kzfree instead of kfree

For sensitive data like keying material, it is common practice to zero
out keys before returning the memory back to the allocator. Thus, use
kzfree instead of kfree.

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agoMerge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jesse/openvswit...
David S. Miller [Fri, 8 Feb 2013 04:37:36 +0000 (23:37 -0500)]
Merge branch 'fixes' of git://git./linux/kernel/git/jesse/openvswitch into openvswitch

Jesse Gross says:

====================
One bug fix for net/3.8 for a long standing problem that was reported a few
times recently.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agoMerge branch 'netback'
David S. Miller [Fri, 8 Feb 2013 04:31:47 +0000 (23:31 -0500)]
Merge branch 'netback'

Ian Campbell says:

====================
The Xen netback implementation contains a couple of flaws which can
allow a guest to cause a DoS in the backend domain, potentially
affecting other domains in the system.

CVE-2013-0216 is a failure to sanity check the ring producer/consumer
pointers which can allow a guest to cause netback to loop for an
extended period preventing other work from occurring.

CVE-2013-0217 is a memory leak on an error path which is guest
triggerable.

The following series contains the fixes for these issues, as previously
included in Xen Security Advisory 39:
http://lists.xen.org/archives/html/xen-announce/2013-02/msg00001.html

Changes in v2:
 - Typo and block comment format fixes
 - Added stable Cc
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agonetback: correct netbk_tx_err to handle wrap around.
Ian Campbell [Wed, 6 Feb 2013 23:41:38 +0000 (23:41 +0000)]
netback: correct netbk_tx_err to handle wrap around.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Jan Beulich <JBeulich@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agoxen/netback: free already allocated memory on failure in xen_netbk_get_requests
Ian Campbell [Wed, 6 Feb 2013 23:41:37 +0000 (23:41 +0000)]
xen/netback: free already allocated memory on failure in xen_netbk_get_requests

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agoxen/netback: don't leak pages on failure in xen_netbk_tx_check_gop.
Matthew Daley [Wed, 6 Feb 2013 23:41:36 +0000 (23:41 +0000)]
xen/netback: don't leak pages on failure in xen_netbk_tx_check_gop.

Signed-off-by: Matthew Daley <mattjd@gmail.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Jan Beulich <JBeulich@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agoxen/netback: shutdown the ring if it contains garbage.
Ian Campbell [Wed, 6 Feb 2013 23:41:35 +0000 (23:41 +0000)]
xen/netback: shutdown the ring if it contains garbage.

A buggy or malicious frontend should not be able to confuse netback.
If we spot anything which is not as it should be then shutdown the
device and don't try to continue with the ring in a potentially
hostile state. Well behaved and non-hostile frontends will not be
penalised.

As well as making the existing checks for such errors fatal also add a
new check that ensures that there isn't an insane number of requests
on the ring (i.e. more than would fit in the ring). If the ring
contains garbage then previously is was possible to loop over this
insane number, getting an error each time and therefore not generating
any more pending requests and therefore not exiting the loop in
xen_netbk_tx_build_gops for an externded period.

Also turn various netdev_dbg calls which no precipitate a fatal error
into netdev_err, they are rate limited because the device is shutdown
afterwards.

This fixes at least one known DoS/softlockup of the backend domain.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Jan Beulich <JBeulich@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agoMerge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty...
Linus Torvalds [Fri, 8 Feb 2013 01:22:30 +0000 (12:22 +1100)]
Merge tag 'fixes-for-linus' of git://git./linux/kernel/git/rusty/linux

Pull virtio fix from Rusty Russell:
 "Obviously I forgot to push this before linux.conf.au..."

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  virtio_console: Don't access uninitialized data.

8 years agoMerge tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland...
Linus Torvalds [Fri, 8 Feb 2013 01:15:14 +0000 (12:15 +1100)]
Merge tag 'rdma-for-linus' of git://git./linux/kernel/git/roland/infiniband

Pull IB regression fixes from Roland Dreier:

 - Fix mlx4 VFs not working on old guests because of 64B CQE changes

 - Fix ill-considered sparse fix for qib

 - Fix IPoIB crash due to skb double destruct introduced in 3.8-rc1

* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB/qib: Fix for broken sparse warning fix
  mlx4_core: Fix advertisement of wrong PF context behaviour
  IPoIB: Fix crash due to skb double destruct

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux...
Linus Torvalds [Fri, 8 Feb 2013 01:06:46 +0000 (12:06 +1100)]
Merge branch 'for-linus' of git://git./linux/kernel/git/mason/linux-btrfs

Pull btrfs fixes from Chris Mason:
 "We've got corner cases for updating i_size that ceph was hitting,
  error handling for quotas when we run out of space, a very subtle
  snapshot deletion race, a crash while removing devices, and one
  deadlock between subvolume creation and the sb_internal code (thanks
  lockdep)."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: move d_instantiate outside the transaction during mksubvol
  Btrfs: fix EDQUOT handling in btrfs_delalloc_reserve_metadata
  Btrfs: fix possible stale data exposure
  Btrfs: fix missing i_size update
  Btrfs: fix race between snapshot deletion and getting inode
  Btrfs: fix missing release of the space/qgroup reservation in start_transaction()
  Btrfs: fix wrong sync_writers decrement in btrfs_file_aio_write()
  Btrfs: do not merge logged extents if we've removed them from the tree
  btrfs: don't try to notify udev about missing devices

8 years agoMerge tag 'pinctrl-for-v3.8-late' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Fri, 8 Feb 2013 01:00:44 +0000 (12:00 +1100)]
Merge tag 'pinctrl-for-v3.8-late' of git://git./linux/kernel/git/linusw/linux-pinctrl

Pull late pinctrl fixes from Linus Walleij:
 "Two patches appeared as of late, one was completely news to me, the
  other one was rotated in -next for the next merge window but turned
  out to be a showstopper.

   - Exynos Kconfig fixup
   - SIRF DT translation bug"

* tag 'pinctrl-for-v3.8-late' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: sirf: replace of_gpio_simple_xlate by sirf specific of_xlate
  pinctrl: exynos: change PINCTRL_EXYNOS option

8 years agoMerge tag 'stable/for-linus-3.8-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 8 Feb 2013 00:55:27 +0000 (11:55 +1100)]
Merge tag 'stable/for-linus-3.8-rc6-tag' of git://git./linux/kernel/git/konrad/xen

Pull Xen fixes from Konrad Rzeszutek Wilk:
 "This has two fixes.  One is a security fix wherein we would spam the
  kernel printk buffer if one of the guests was misbehaving.  The other
  is much tamer and it was us only checking for one type of error from
  the IRQ subsystem (when allocating new IRQs) instead of for all of
  them.

   - Fix an IRQ allocation where we only check for a specific error (-1).
   - CVE-2013-0231 / XSA-43.  Make xen-pciback rate limit error messages
     from xen_pcibk_enable_msi{,x}()"

* tag 'stable/for-linus-3.8-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen: fix error handling path if xen_allocate_irq_dynamic fails
  xen-pciback: rate limit error messages from xen_pcibk_enable_msi{,x}()

8 years agoMerge tag 'regulator-v3.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broon...
Linus Torvalds [Fri, 8 Feb 2013 00:52:53 +0000 (11:52 +1100)]
Merge tag 'regulator-v3.8-rc6' of git://git./linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "Mostly driver specific fixes here, though one of them uncovered the
  issue Stephen Warren fixed with multiple OF matches getting upset due
  to a lack of cleanup."

* tag 'regulator-v3.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: s2mps11: fix incorrect register for buck10
  regulator: clear state each invocation of of_regulator_match
  regulator: max8997: Fix using wrong dev argument at various places
  regulator: max77686: Fix using wrong dev argument at various places
  regulator: max8907: Fix using wrong dev argument for calling of_regulator_match
  regulator: max8998: fix incorrect min_uV value for ldo10
  regulator: tps65910: Fix using wrong dev argument for calling of_regulator_match
  regulator: tps65217: Fix using wrong dev argument for calling of_regulator_match

8 years agodrm/ttm: fix fence locking in ttm_buffer_object_transfer, 2nd try
Daniel Vetter [Mon, 14 Jan 2013 14:08:14 +0000 (15:08 +0100)]
drm/ttm: fix fence locking in ttm_buffer_object_transfer, 2nd try

This fixes up

commit e8e89622ed361c46bf90ba4828e685a8b603f7e5
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Tue Dec 18 22:25:11 2012 +0100

    drm/ttm: fix fence locking in ttm_buffer_object_transfer

which leaves behind a might_sleep in atomic context, since the
fence_lock spinlock is held over a kmalloc(GFP_KERNEL) call. The fix
is to revert the above commit and only take the lock where we need it,
around the call to ->sync_obj_ref.

v2: Fixup things noticed by Maarten Lankhorst:
- Brown paper bag locking bug.
- No need for kzalloc if we clear the entire thing on the next line.
- check for bo->sync_obj (totally unlikely race, but still someone
  else could have snuck in) and clear fbo->sync_obj if it's cleared
  already.

Reported-by: Dave Airlie <airlied@gmail.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
8 years agovirtio_console: Don't access uninitialized data.
Sjur Brændeland [Mon, 21 Jan 2013 23:20:26 +0000 (09:50 +1030)]
virtio_console: Don't access uninitialized data.

Don't access uninitialized work-queue when removing device.
The work queue is initialized only if the device multi-queue.
So don't call cancel_work unless this is a multi-queue device.

This fixes the following panic:

Kernel panic - not syncing: BUG!
Call Trace:
62031b28:  [<6026085d>] panic+0x16b/0x2d3
62031b30:  [<6004ef5e>] flush_work+0x0/0x1d7
62031b60:  [<602606f2>] panic+0x0/0x2d3
62031b68:  [<600333b0>] memcpy+0x0/0x140
62031b80:  [<6002d58a>] unblock_signals+0x0/0x84
62031ba0:  [<602609c5>] printk+0x0/0xa0
62031bd8:  [<60264e51>] __mutex_unlock_slowpath+0x13d/0x148
62031c10:  [<6004ef5e>] flush_work+0x0/0x1d7
62031c18:  [<60050234>] try_to_grab_pending+0x0/0x17e
62031c38:  [<6004e984>] get_work_gcwq+0x71/0x8f
62031c48:  [<60050539>] __cancel_work_timer+0x5b/0x115
62031c78:  [<628acc85>] unplug_port+0x0/0x191 [virtio_console]
62031c98:  [<6005061c>] cancel_work_sync+0x12/0x14
62031ca8:  [<628ace96>] virtcons_remove+0x80/0x15c [virtio_console]
62031ce8:  [<628191de>] virtio_dev_remove+0x1e/0x7e [virtio]
62031d08:  [<601cf242>] __device_release_driver+0x75/0xe4
62031d28:  [<601cf2dd>] device_release_driver+0x2c/0x40
62031d48:  [<601ce0dd>] driver_unbind+0x7d/0xc6
62031d88:  [<601cd5d9>] drv_attr_store+0x27/0x29
62031d98:  [<60115f61>] sysfs_write_file+0x100/0x14d
62031df8:  [<600b737d>] vfs_write+0xcb/0x184
62031e08:  [<600b58b8>] filp_close+0x88/0x94
62031e38:  [<600b7686>] sys_write+0x59/0x88
62031e88:  [<6001ced1>] handle_syscall+0x5d/0x80
62031ea8:  [<60030a74>] userspace+0x405/0x531
62031f08:  [<600d32cc>] sys_dup+0x0/0x5e
62031f28:  [<601b11d6>] strcpy+0x0/0x18
62031f38:  [<600be46c>] do_execve+0x10/0x12
62031f48:  [<600184c7>] run_init_process+0x43/0x45
62031fd8:  [<60019a91>] new_thread_handler+0xba/0xbc

Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Cc: stable@kernel.org
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
8 years agoMerge tag 'sound-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Linus Torvalds [Wed, 6 Feb 2013 21:43:30 +0000 (08:43 +1100)]
Merge tag 'sound-3.8' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "Just a couple of build regression fixes for ASoC fsl stuff.  It
  doesn't look too trivial, but neither intrusive, so hopefully I can
  avoid your curse..."

Hey, Takashi has a good track record, I think he gets a pass..

* tag 'sound-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ASoC: fsl: fix snd-soc-imx-pcm module build
  Revert "ASoC: fsl: fix multiple definition of init_module"

8 years agoMerge branch 'for-linus' of git://git.kernel.dk/linux-block
Linus Torvalds [Wed, 6 Feb 2013 21:38:33 +0000 (08:38 +1100)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block

Pull block layer updates from Jens Axboe:
 "I've got a few bits pending for 3.8 final, that I better get sent out.
  It's all been sitting for a while, I consider it safe.

  It contains:

   - Two bug fixes for mtip32xx, fixing a driver hang and a crash.

   - A few-liner protocol error fix for drbd.

   - A few fixes for the xen block front/back driver, fixing a potential
     data corruption issue.

   - A race fix for disk_clear_events(), causing spurious warnings.  Out
     of the Chrome OS base.

   - A deadlock fix for disk_clear_events(), moving it to the a
     unfreezable workqueue.  Also from the Chrome OS base."

* 'for-linus' of git://git.kernel.dk/linux-block:
  drbd: fix potential protocol error and resulting disconnect/reconnect
  mtip32xx: fix for crash when the device surprise removed during rebuild
  mtip32xx: fix for driver hang after a command timeout
  block: prevent race/cleanup
  block: remove deadlock in disk_clear_events
  xen-blkfront: handle bvecs with partial data
  llist/xen-blkfront: implement safe version of llist_for_each_entry
  xen-blkback: implement safe iterator for the list of persistent grants

8 years agonet: qmi_wwan: add more Huawei devices, including E320
Bjørn Mork [Wed, 6 Feb 2013 05:22:08 +0000 (05:22 +0000)]
net: qmi_wwan: add more Huawei devices, including E320

Adding new class/subclass/protocol combinations based on the GPLed
out-of-tree Huawei driver. One of these has already appeared on a
device labelled as "E320".

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agonet: cdc_ncm: add another Huawei vendor specific device
Bjørn Mork [Wed, 6 Feb 2013 05:21:53 +0000 (05:21 +0000)]
net: cdc_ncm: add another Huawei vendor specific device

Adding a new vendor specific class/subclass/protocol combination
for CDC NCM devices based on information from a GPLed out-of-tree
driver from Huawei.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agoipv6/ip6_gre: fix error case handling in ip6gre_tunnel_xmit()
Tommi Rantala [Wed, 6 Feb 2013 03:24:02 +0000 (03:24 +0000)]
ipv6/ip6_gre: fix error case handling in ip6gre_tunnel_xmit()

ip6gre_tunnel_xmit() is leaking the skb when we hit this error branch,
and the -1 return value from this function is bogus. Use the error
handling we already have in place in ip6gre_tunnel_xmit() for this error
case to fix this.

Signed-off-by: Tommi Rantala <tt.rantala@gmail.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agotcp: fix for zero packets_in_flight was too broad
Ilpo Järvinen [Mon, 4 Feb 2013 02:14:25 +0000 (02:14 +0000)]
tcp: fix for zero packets_in_flight was too broad

There are transients during normal FRTO procedure during which
the packets_in_flight can go to zero between write_queue state
updates and firing the resulting segments out. As FRTO processing
occurs during that window the check must be more precise to
not match "spuriously" :-). More specificly, e.g., when
packets_in_flight is zero but FLAG_DATA_ACKED is true the problematic
branch that set cwnd into zero would not be taken and new segments
might be sent out later.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Tested-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agoMerge branch 'wireless'
David S. Miller [Wed, 6 Feb 2013 19:51:14 +0000 (14:51 -0500)]
Merge branch 'wireless'

John W. Linville says:

====================
Please consider this pull request for the 3.8 stream...

Included is a bluetooth pull.  Gustavo says:

"Two simple fixes for 3.8. One of the patches fixes a situation
where the connection wasn't terminated if a timeout ocurrs for LE
an SCO connections.  The other fixes prevent NULL dereference in the
SMP code, it is a security fix as well."

Along with those...

Hauke Mehrtens provides a couple of ssb and bcma bus fixes that
prevent oopses when unloading those modules.

Larry Finger provides and rtlwifi fix to avoid a "scheduling while
atomic" bug.

Last but certainly not least, Arend van Spriel bring a brcmsmac fix that
reworks the mac80211 .flush() callback in order to avoid the dreaded
brcms_c_wait_for_tx_completion warnings.  This one looks a little
large, but I think it is safe and isolated to brcmsmac in any case.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...
John W. Linville [Wed, 6 Feb 2013 18:55:44 +0000 (13:55 -0500)]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless into for-davem

8 years agoBtrfs: move d_instantiate outside the transaction during mksubvol
Chris Mason [Wed, 6 Feb 2013 17:06:02 +0000 (12:06 -0500)]
Btrfs: move d_instantiate outside the transaction during mksubvol

Dave Sterba triggered a lockdep complaint about lock ordering
between the sb_internal lock and the cleaner semaphore.

btrfs_lookup_dentry() checks for orphans if we're looking up
the inode for a subvolume, and subvolume creation is triggering
the lookup with a transaction running.

This commit moves the d_instantiate after the transaction closes.

Signed-off-by: Chris Mason <chris.mason@fusionio.com>
8 years agoxen: fix error handling path if xen_allocate_irq_dynamic fails
Wei Liu [Thu, 31 Jan 2013 14:46:56 +0000 (14:46 +0000)]
xen: fix error handling path if xen_allocate_irq_dynamic fails

It is possible that the call to xen_allocate_irq_dynamic() returns negative
number other than -1.

Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
8 years agoxen-pciback: rate limit error messages from xen_pcibk_enable_msi{,x}()
Jan Beulich [Wed, 6 Feb 2013 15:30:38 +0000 (10:30 -0500)]
xen-pciback: rate limit error messages from xen_pcibk_enable_msi{,x}()

... as being guest triggerable (e.g. by invoking
XEN_PCI_OP_enable_msi{,x} on a device not being MSI/MSI-X capable).

This is CVE-2013-0231 / XSA-43.

Also make the two messages uniform in both their wording and severity.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
8 years agoMerge branch 'fix/fsl' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound...
Takashi Iwai [Wed, 6 Feb 2013 14:16:58 +0000 (15:16 +0100)]
Merge branch 'fix/fsl' of git://git./linux/kernel/git/broonie/sound into for-linus-uncursed

We need this for fixing build error regressions in soc/fsl.

8 years agoBtrfs: fix EDQUOT handling in btrfs_delalloc_reserve_metadata
Jan Schmidt [Mon, 28 Jan 2013 06:26:00 +0000 (23:26 -0700)]
Btrfs: fix EDQUOT handling in btrfs_delalloc_reserve_metadata

When btrfs_qgroup_reserve returned a failure, we were missing a counter
operation for BTRFS_I(inode)->outstanding_extents++, leading to warning
messages about outstanding extents and space_info->bytes_may_use != 0.
Additionally, the error handling code didn't take into account that we
dropped the inode lock which might require more cleanup.

Luckily, all the cleanup code we need is already there and can be shared
with reserve_metadata_bytes, which is exactly what this patch does.

Reported-by: Lev Vainblat <lev@zadarastorage.com>
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
8 years agoACPI: Add DMI entry for Sony VGN-FW41E_H
Joseph Salisbury [Tue, 5 Feb 2013 00:16:29 +0000 (00:16 +0000)]
ACPI: Add DMI entry for Sony VGN-FW41E_H

This patch adds a quirk to allow the Sony VGN-FW41E_H to suspend/resume
properly.

References: http://bugs.launchpad.net/bugs/1113547
Signed-off-by: Joseph Salisbury <joseph.salisbury@canonical.com>
Cc: All <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
8 years agoMerge remote-tracking branch 'regulator/fix/tps65910' into tmp
Mark Brown [Wed, 6 Feb 2013 11:28:53 +0000 (11:28 +0000)]
Merge remote-tracking branch 'regulator/fix/tps65910' into tmp

8 years agoMerge remote-tracking branch 'regulator/fix/tps65217' into tmp
Mark Brown [Wed, 6 Feb 2013 11:28:52 +0000 (11:28 +0000)]
Merge remote-tracking branch 'regulator/fix/tps65217' into tmp

8 years agoMerge remote-tracking branch 'regulator/fix/s2mps11' into tmp
Mark Brown [Wed, 6 Feb 2013 11:28:51 +0000 (11:28 +0000)]
Merge remote-tracking branch 'regulator/fix/s2mps11' into tmp

8 years agoMerge remote-tracking branch 'regulator/fix/of' into tmp
Mark Brown [Wed, 6 Feb 2013 11:28:51 +0000 (11:28 +0000)]
Merge remote-tracking branch 'regulator/fix/of' into tmp

8 years agoMerge remote-tracking branch 'regulator/fix/max8998' into tmp
Mark Brown [Wed, 6 Feb 2013 11:28:50 +0000 (11:28 +0000)]
Merge remote-tracking branch 'regulator/fix/max8998' into tmp

8 years agoMerge remote-tracking branch 'regulator/fix/max8997' into tmp
Mark Brown [Wed, 6 Feb 2013 11:28:49 +0000 (11:28 +0000)]
Merge remote-tracking branch 'regulator/fix/max8997' into tmp

8 years agoMerge remote-tracking branch 'regulator/fix/max8907' into tmp
Mark Brown [Wed, 6 Feb 2013 11:28:48 +0000 (11:28 +0000)]
Merge remote-tracking branch 'regulator/fix/max8907' into tmp

8 years agoMerge remote-tracking branch 'regulator/fix/max77686' into tmp
Mark Brown [Wed, 6 Feb 2013 11:28:48 +0000 (11:28 +0000)]
Merge remote-tracking branch 'regulator/fix/max77686' into tmp

8 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/josef/btrfs-next.git for-chris...
Chris Mason [Wed, 6 Feb 2013 00:24:44 +0000 (19:24 -0500)]
Merge git://git./linux/kernel/git/josef/btrfs-next.git for-chris into for-linus

8 years agoACPI tools / acpidump: must be run as root - install it into /usr/sbin
Thomas Renninger [Tue, 5 Feb 2013 22:35:32 +0000 (23:35 +0100)]
ACPI tools / acpidump: must be run as root - install it into /usr/sbin

Change the default location to install acpidump into from /usr/bin
to /usr/sbin, as this tool needs to be run as root.

[rjw: Subject and changelog]
Signed-off-by: Thomas Renninger <trenn@suse.de>
Tested-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>